3 # Copyright (c) 2005 Junio C Hamano
5 # This program is free software: you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation, either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see http://www.gnu.org/licenses/ .
18 if [ ${BASH_VERSINFO[0]} -lt 4 ]; then
19 echo "Error: The notmuch test suite requires a bash version >= 4.0"
20 echo "due to use of associative arrays within the test suite."
21 echo "Please try again with a newer bash (or help us fix the"
22 echo "test suite to be more portable). Thanks."
26 # if --tee was passed, write the output not only to the terminal, but
27 # additionally to the file test-results/$BASENAME.out, too.
28 case "$GIT_TEST_TEE_STARTED, $* " in
30 # do not redirect again
32 *' --tee '*|*' --va'*)
34 BASE=test-results/$(basename "$0" .sh)
35 (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
36 echo $? > $BASE.exit) | tee $BASE.out
37 test "$(cat $BASE.exit)" = 0
42 # Keep the original TERM for say_color
45 # For repeatability, reset the environment to known value.
51 export LANG LC_ALL PAGER TERM TZ
52 GIT_TEST_CMP=${GIT_TEST_CMP:-diff -u}
54 # Protect ourselves from common misconfiguration to export
55 # CDPATH into the environment
62 # A regexp to match 5 and 40 hexdigits
63 _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
64 _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
66 _x04='[0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
67 _x32="$_x04$_x04$_x04$_x04$_x04$_x04$_x04$_x04"
69 # Each test should start with something like this, after copyright notices:
71 # test_description='Description of this test...
72 # This test checks if command xyzzy does the right thing...
75 [ "x$ORIGINAL_TERM" != "xdumb" ] && (
76 TERM=$ORIGINAL_TERM &&
79 tput bold >/dev/null 2>&1 &&
80 tput setaf 1 >/dev/null 2>&1 &&
81 tput sgr0 >/dev/null 2>&1
88 -d|--d|--de|--deb|--debu|--debug)
90 -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
92 -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
93 GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
94 -h|--h|--he|--hel|--help)
96 -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
98 -q|--q|--qu|--qui|--quie|--quiet)
101 with_dashes=t; shift ;;
107 --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
108 valgrind=t; verbose=t; shift ;;
110 shift ;; # was handled already
112 root=$(expr "z$1" : 'z[^=]*=\(.*\)')
115 echo "error: unknown test option '$1'" >&2; exit 1 ;;
119 if test -n "$color"; then
125 error) tput bold; tput setaf 1;; # bold red
126 skip) tput bold; tput setaf 2;; # bold green
127 pass) tput setaf 2;; # green
128 info) tput setaf 3;; # brown
129 *) test -n "$quiet" && return;;
139 test -z "$1" && test -n "$quiet" && return
147 say_color error "error: $*\n"
156 test "${test_description}" != "" ||
157 error "Test script did not set test_description."
159 if test "$help" = "t"
161 echo "Tests ${test_description}"
165 echo $(basename "$0"): "Testing ${test_description}"
177 if test -n "$GIT_EXIT_OK"
181 echo >&5 "FATAL: Unexpected exit with code $code"
189 test_decode_color () {
190 sed -e 's/.\[1m/<WHITE>/g' \
191 -e 's/.\[31m/<RED>/g' \
192 -e 's/.\[32m/<GREEN>/g' \
193 -e 's/.\[33m/<YELLOW>/g' \
194 -e 's/.\[34m/<BLUE>/g' \
195 -e 's/.\[35m/<MAGENTA>/g' \
196 -e 's/.\[36m/<CYAN>/g' \
197 -e 's/.\[m/<RESET>/g'
209 sed -e 's/$/Q/' | tr Q '\015'
213 tr '\015' Q | sed -e 's/Q$//'
216 # Notmuch helper functions
217 increment_mtime_amount=0
222 increment_mtime_amount=$((increment_mtime_amount + 1))
223 touch -d "+${increment_mtime_amount} seconds" "$dir"
226 # Generate a new message in the mail directory, with a unique message
227 # ID and subject. The message is not added to the index.
229 # After this function returns, the filename of the generated message
230 # is available as $gen_msg_filename and the message ID is available as
233 # This function supports named parameters with the bash syntax for
234 # assigning a value to an associative array ([name]=value). The
235 # supported parameters are:
237 # [dir]=directory/of/choice
239 # Generate the message in directory 'directory/of/choice' within
240 # the mail store. The directory will be created if necessary.
244 # Store the message in file 'name'. The default is to store it
245 # in 'msg-<count>', where <count> is three-digit number of the
250 # Text to use as the body of the email message
252 # '[from]="Some User <user@example.com>"'
253 # '[to]="Some User <user@example.com>"'
254 # '[subject]="Subject of email message"'
255 # '[date]="RFC 822 Date"'
257 # Values for email headers. If not provided, default values will
258 # be generated instead.
260 # '[cc]="Some User <user@example.com>"'
261 # [reply-to]=some-address
262 # [in-reply-to]=<message-id>
263 # [references]=<message-id>
264 # [content-type]=content-type-specification
265 # '[header]=full header line, including keyword'
267 # Additional values for email headers. If these are not provided
268 # then the relevant headers will simply not appear in the
273 # Controls the message-id of the created message.
279 # This is our (bash-specific) magic for doing named parameters
280 local -A template="($@)"
281 local additional_headers
283 gen_msg_cnt=$((gen_msg_cnt + 1))
284 if [ -z "${template[filename]}" ]; then
285 gen_msg_name="msg-$(printf "%03d" $gen_msg_cnt)"
287 gen_msg_name=${template[filename]}
290 if [ -z "${template[id]}" ]; then
291 gen_msg_id="${gen_msg_name%:2,*}@notmuch-test-suite"
293 gen_msg_id="${template[id]}"
296 if [ -z "${template[dir]}" ]; then
297 gen_msg_filename="${MAIL_DIR}/$gen_msg_name"
299 gen_msg_filename="${MAIL_DIR}/${template[dir]}/$gen_msg_name"
300 mkdir -p "$(dirname "$gen_msg_filename")"
303 if [ -z "${template[body]}" ]; then
304 template[body]="This is just a test message (#${gen_msg_cnt})"
307 if [ -z "${template[from]}" ]; then
308 template[from]="Notmuch Test Suite <test_suite@notmuchmail.org>"
311 if [ -z "${template[to]}" ]; then
312 template[to]="Notmuch Test Suite <test_suite@notmuchmail.org>"
315 if [ -z "${template[subject]}" ]; then
316 template[subject]="Test message #${gen_msg_cnt}"
319 if [ -z "${template[date]}" ]; then
320 template[date]="Tue, 05 Jan 2001 15:43:57 -0000"
323 additional_headers=""
324 if [ ! -z "${template[header]}" ]; then
325 additional_headers="${template[header]}
326 ${additional_headers}"
329 if [ ! -z "${template[reply-to]}" ]; then
330 additional_headers="Reply-To: ${template[reply-to]}
331 ${additional_headers}"
334 if [ ! -z "${template[in-reply-to]}" ]; then
335 additional_headers="In-Reply-To: ${template[in-reply-to]}
336 ${additional_headers}"
339 if [ ! -z "${template[cc]}" ]; then
340 additional_headers="Cc: ${template[cc]}
341 ${additional_headers}"
344 if [ ! -z "${template[references]}" ]; then
345 additional_headers="References: ${template[references]}
346 ${additional_headers}"
349 if [ ! -z "${template[content-type]}" ]; then
350 additional_headers="Content-Type: ${template[content-type]}
351 ${additional_headers}"
355 cat <<EOF >"$gen_msg_filename"
356 From: ${template[from]}
358 Message-Id: <${gen_msg_id}>
359 Subject: ${template[subject]}
360 Date: ${template[date]}
361 ${additional_headers}
365 # Ensure that the mtime of the containing directory is updated
366 increment_mtime "$(dirname "${gen_msg_filename}")"
369 # Generate a new message and add it to the database.
371 # All of the arguments and return values supported by generate_message
372 # are also supported here, so see that function for details.
375 generate_message "$@" &&
376 notmuch new > /dev/null
379 # Generate a corpus of email and add it to the database.
381 # This corpus is fixed, (it happens to be 50 messages from early in
382 # the history of the notmuch mailing list), which allows for reliably
383 # testing commands that need to operate on a not-totally-trivial
384 # number of messages.
388 if [ -d ../corpus.mail ]; then
389 cp -a ../corpus.mail ${MAIL_DIR}
391 cp -a ../corpus ${MAIL_DIR}
392 notmuch new >/dev/null
393 cp -a ${MAIL_DIR} ../corpus.mail
397 test_begin_subtest ()
399 if [ -n "$inside_subtest" ]; then
400 exec 1>&6 2>&7 # Restore stdout and stderr
401 error "bug in test script: Missing test_expect_equal in ${BASH_SOURCE[1]}:${BASH_LINENO[0]}"
403 test_subtest_name="$1"
404 # Remember stdout and stderr file descriptios and redirect test
405 # output to the previously prepared file descriptors 3 and 4 (see
407 if test "$verbose" != "t"; then exec 4>test.output 3>&4; fi
408 exec 6>&1 7>&2 >&3 2>&4
412 # Pass test if two arguments match
414 # Note: Unlike all other test_expect_* functions, this function does
415 # not accept a test name. Instead, the caller should call
416 # test_begin_subtest before calling this function in order to set the
420 exec 1>&6 2>&7 # Restore stdout and stderr
422 test "$#" = 3 && { prereq=$1; shift; } || prereq=
424 error "bug in the test script: not 2 or 3 parameters to test_expect_equal"
430 if [ "$output" = "$expected" ]; then
431 test_ok_ "$test_subtest_name"
433 testname=$this_test.$test_count
434 echo "$expected" > $testname.expected
435 echo "$output" > $testname.output
436 test_failure_ "$test_subtest_name" "$(diff -u $testname.expected $testname.output)"
441 test_expect_equal_failure ()
443 test "$#" = 3 && { prereq=$1; shift; } || prereq=
445 error "bug in the test script: not 2 or 3 parameters to test_expect_equal"
451 if [ "$output" = "$expected" ]; then
452 test_known_broken_ok_ "$test_subtest_name"
454 test_known_broken_failure_ "$test_subtest_name"
461 notmuch new | grep -v -E -e '^Processed [0-9]*( total)? file|Found [0-9]* total file'
464 notmuch_search_sanitize ()
466 sed -r -e 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/'
469 NOTMUCH_SHOW_FILENAME_SQUELCH='s,filename:.*/mail,filename:/XXX/mail,'
470 notmuch_show_sanitize ()
472 sed -e "$NOTMUCH_SHOW_FILENAME_SQUELCH"
475 # End of notmuch helper functions
477 # Use test_set_prereq to tell that a particular prerequisite is available.
478 # The prerequisite can later be checked for in two ways:
480 # - Explicitly using test_have_prereq.
482 # - Implicitly by specifying the prerequisite tag in the calls to
483 # test_expect_{success,failure,code}.
485 # The single parameter is the prerequisite tag (a simple word, in all
486 # capital letters by convention).
489 satisfied="$satisfied$1 "
493 test_have_prereq () {
502 # You are not expected to call test_ok_ and test_failure_ directly, use
503 # the text_expect_* functions instead.
506 test_success=$(($test_success + 1))
507 say_color pass "%-6s" "PASS"
512 test_failure=$(($test_failure + 1))
513 say_color error "%-6s" "FAIL"
516 echo "$@" | sed -e 's/^/ /'
517 if test "$verbose" != "t"; then cat test.output; fi
518 test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
521 test_known_broken_ok_ () {
522 test_fixed=$(($test_fixed+1))
523 say_color pass "%-6s" "FIXED"
527 test_known_broken_failure_ () {
528 test_broken=$(($test_broken+1))
529 say_color pass "%-6s" "BROKEN"
534 test "$debug" = "" || eval "$1"
539 if test "$verbose" != "t"; then exec 4>test.output 3>&4; fi
542 eval >&3 2>&4 "$test_cleanup"
547 test_count=$(($test_count+1))
549 for skp in $NOTMUCH_SKIP_TESTS
551 case $this_test.$test_count in
556 if test -z "$to_skip" && test -n "$prereq" &&
557 ! test_have_prereq "$prereq"
563 say_color skip >&3 "skipping test: $@"
564 say_color skip "%-6s" "SKIP"
574 test_expect_failure () {
575 test "$#" = 3 && { prereq=$1; shift; } || prereq=
577 error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
581 if [ "$?" = 0 -a "$eval_ret" = 0 ]
583 test_known_broken_ok_ "$1"
585 test_known_broken_failure_ "$1"
590 test_expect_success () {
591 test "$#" = 3 && { prereq=$1; shift; } || prereq=
593 error "bug in the test script: not 2 or 3 parameters to test-expect-success"
597 if [ "$?" = 0 -a "$eval_ret" = 0 ]
606 test_expect_code () {
607 test "$#" = 4 && { prereq=$1; shift; } || prereq=
609 error "bug in the test script: not 3 or 4 parameters to test-expect-code"
613 if [ "$?" = 0 -a "$eval_ret" = "$1" ]
622 # test_external runs external test scripts that provide continuous
623 # test output about their progress, and succeeds/fails on
624 # zero/non-zero exit code. It outputs the test output on stdout even
625 # in non-verbose mode, and announces the external script with "* run
626 # <n>: ..." before running it. When providing relative paths, keep in
627 # mind that all scripts run in "trash directory".
628 # Usage: test_external description command arguments...
629 # Example: test_external 'Perl API' perl ../path/to/test.pl
631 test "$#" = 4 && { prereq=$1; shift; } || prereq=
633 error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
636 if ! test_skip "$descr" "$@"
638 # Announce the script to reduce confusion about the
639 # test output that follows.
640 say_color "" " run $test_count: $descr ($*)"
641 # Run command; redirect its stderr to &4 as in
642 # test_run_, but keep its stdout on our stdout even in
649 test_failure_ "$descr" "$@"
654 # Like test_external, but in addition tests that the command generated
655 # no output on stderr.
656 test_external_without_stderr () {
657 # The temporary file has no (and must have no) security
659 tmp="$TMPDIR"; if [ -z "$tmp" ]; then tmp=/tmp; fi
660 stderr="$tmp/git-external-stderr.$$.tmp"
661 test_external "$@" 4> "$stderr"
662 [ -f "$stderr" ] || error "Internal error: $stderr disappeared."
663 descr="no stderr: $1"
665 if [ ! -s "$stderr" ]; then
669 if [ "$verbose" = t ]; then
670 output=`echo; echo Stderr is:; cat "$stderr"`
674 # rm first in case test_failure exits.
676 test_failure_ "$descr" "$@" "$output"
680 # This is not among top-level (test_expect_success | test_expect_failure)
681 # but is a prefix that can be used in the test script, like:
683 # test_expect_success 'complain and die' '
685 # do something else &&
686 # test_must_fail git checkout ../outerspace
689 # Writing this as "! git checkout ../outerspace" is wrong, because
690 # the failure could be due to a segv. We want a controlled failure.
694 test $? -gt 0 -a $? -le 129 -o $? -gt 192
697 # test_cmp is a helper function to compare actual and expected output.
698 # You can use it like:
700 # test_expect_success 'foo works' '
701 # echo expected >expected &&
703 # test_cmp expected actual
706 # This could be written as either "cmp" or "diff -u", but:
707 # - cmp's output is not nearly as easy to read as diff -u
708 # - not all diff versions understand "-u"
714 # This function can be used to schedule some commands to be run
715 # unconditionally at the end of the test to restore sanity:
717 # test_expect_success 'test core.capslock' '
718 # git config core.capslock true &&
719 # test_when_finished "git config --unset core.capslock" &&
723 # That would be roughly equivalent to
725 # test_expect_success 'test core.capslock' '
726 # git config core.capslock true &&
728 # git config --unset core.capslock
731 # except that the greeting and config --unset must both succeed for
734 test_when_finished () {
736 } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
741 test_results_dir="$TEST_DIRECTORY/test-results"
742 mkdir -p "$test_results_dir"
743 test_results_path="$test_results_dir/${0%.sh}-$$"
745 echo "total $test_count" >> $test_results_path
746 echo "success $test_success" >> $test_results_path
747 echo "fixed $test_fixed" >> $test_results_path
748 echo "broken $test_broken" >> $test_results_path
749 echo "failed $test_failure" >> $test_results_path
750 echo "" >> $test_results_path
754 if [ "$test_failure" = "0" ]; then
763 # Construct a little test script here for the benefit of the user,
764 # (who can easily run "run_emacs" to get the same emacs environment
765 # for investigating any failures).
766 cat <<EOF > run_emacs
769 export NOTMUCH_CONFIG=$NOTMUCH_CONFIG
771 # We assume that the user will give a command-line argument only if
772 # wanting to run in batch mode.
773 if [ \$# -gt 0 ]; then
777 # Here's what we are using here:
779 # --batch: Quit after given commands and print all (messages)
781 # --no-init-file Don't load users ~/.emacs
783 # --no-site-file Don't load the site-wide startup stuff
785 # --directory Ensure that the local notmuch.el source is found
787 # --load Force loading of notmuch.el
789 # notmuch-test-wait Function for tests to use to wait for process completion
791 # message-signature Avoiding appending user's signature on messages
793 # set-frame-width 80 columns (avoids crazy 10-column default of --batch)
795 emacs \$BATCH --no-init-file --no-site-file \
796 --directory ../../emacs --load notmuch.el \
797 --eval "(defun notmuch-test-wait ()
798 (while (get-buffer-process (current-buffer))
800 --eval "(setq message-signature nil)" \
801 --eval "(progn (set-frame-width (window-frame (get-buffer-window)) 80) \$@)"
803 chmod a+x ./run_emacs
812 while [ -n "$dir" ]; do
814 if [ -x "$bin" ]; then
818 dir="$(dirname "$dir")"
819 if [ "$dir" = "/" ]; then
825 # Test the binaries we have just built. The tests are kept in
826 # test/ subdirectory and are run in 'trash directory' subdirectory.
827 TEST_DIRECTORY=$(pwd)
828 if test -n "$valgrind"
832 test "$1" = "$(readlink "$2")" || {
840 while test -d "$2".lock
842 say "Waiting for lock on $2."
849 make_valgrind_symlink () {
850 # handle only executables
851 test -x "$1" || return
853 base=$(basename "$1")
854 symlink_target=$TEST_DIRECTORY/../$base
855 # do not override scripts
856 if test -x "$symlink_target" &&
857 test ! -d "$symlink_target" &&
858 test "#!" != "$(head -c 2 < "$symlink_target")"
860 symlink_target=../valgrind.sh
864 symlink_target=../unprocessed-script
866 # create the link, or replace it if it is out of date
867 make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
870 # override notmuch executable in TEST_DIRECTORY/..
871 GIT_VALGRIND=$TEST_DIRECTORY/valgrind
872 mkdir -p "$GIT_VALGRIND"/bin
873 make_valgrind_symlink $TEST_DIRECTORY/../notmuch
878 ls "$path"/notmuch 2> /dev/null |
881 make_valgrind_symlink "$file"
885 PATH=$GIT_VALGRIND/bin:$PATH
886 GIT_EXEC_PATH=$GIT_VALGRIND/bin
889 notmuch_path=`find_notmuch_path "$TEST_DIRECTORY"`
890 test -n "$notmuch_path" && PATH="$notmuch_path:$PATH"
895 test="tmp.$(basename "$0" .sh)"
896 test -n "$root" && test="$root/$test"
898 /*) TMP_DIRECTORY="$test" ;;
899 *) TMP_DIRECTORY="$TEST_DIRECTORY/$test" ;;
901 test ! -z "$debug" || remove_tmp=$TMP_DIRECTORY
904 echo >&5 "FATAL: Cannot prepare test area"
908 MAIL_DIR="${TMP_DIRECTORY}/mail"
909 export NOTMUCH_CONFIG="${TMP_DIRECTORY}/notmuch-config"
912 mkdir -p "${MAIL_DIR}"
914 cat <<EOF >"${NOTMUCH_CONFIG}"
919 name=Notmuch Test Suite
920 primary_email=test_suite@notmuchmail.org
921 other_email=test_suite_other@notmuchmail.org;test_suite@otherdomain.org
925 # Use -P to resolve symlinks in our working directory so that the cwd
926 # in subprocesses like git equals our $PWD (for pathname comparisons).
927 cd -P "$test" || error "Cannot setup test environment"
929 if test "$verbose" = "t"
933 exec 4>test.output 3>&4
937 for skp in $NOTMUCH_SKIP_TESTS
940 for skp in $NOTMUCH_SKIP_TESTS
949 say_color skip >&3 "skipping test $this_test altogether"
950 say_color skip "skip all tests in $this_test"
955 # Provide an implementation of the 'yes' utility
970 # Fix some commands on Windows
973 # Windows has its own (incompatible) sort and find
983 # git sees Windows-style pwd
987 # no POSIX permissions
988 # backslashes in pathspec are converted to '/'
989 # exec does not inherit the PID
992 test_set_prereq POSIXPERM
993 test_set_prereq BSLASHPSPEC
994 test_set_prereq EXECKEEPSPID
998 test -z "$NO_PERL" && test_set_prereq PERL
999 test -z "$NO_PYTHON" && test_set_prereq PYTHON
1001 # test whether the filesystem supports symbolic links
1002 ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS