#! /bin/sh
+set -u
+
# Test whether this shell is capable of parameter substring processing.
( option='a/b'; : ${option#*/} ) 2>/dev/null || {
echo "
# Store original IFS value so it can be changed (and restored) in many places.
readonly DEFAULT_IFS="$IFS"
+# The top-level directory for the source. This ./configure and all Makefiles
+# are good with ${srcdir} usually being relative. Some components (e.g. tests)
+# are executed in subdirectories and for those it is simpler to use
+# ${NOTMUCH_SRCDIR} which holds absolute path to the source.
srcdir=$(dirname "$0")
+NOTMUCH_SRCDIR=$(cd "$srcdir" && pwd)
+
+case $NOTMUCH_SRCDIR in ( *\'* | *['\"`$']* )
+ echo "Definitely unsafe characters in source path '$NOTMUCH_SRCDIR'".
+ exit 1
+esac
+
+case $PWD in ( *\'* | *['\"`$']* )
+ echo "Definitely unsafe characters in current directory '$PWD'".
+ exit 1
+esac
+
+# In case of whitespace, builds may work, tests definitely will not.
+case $NOTMUCH_SRCDIR in ( *["$IFS"]* )
+ echo "Whitespace in source path '$NOTMUCH_SRCDIR' not supported".
+ exit 1
+esac
+
+case $PWD in ( *["$IFS"]* )
+ echo "Whitespace in current directory '$PWD' not supported".
+ exit 1
+esac
subdirs="util compat lib parse-time-string completion doc emacs"
-subdirs="${subdirs} performance-test test test/test-databases"
+subdirs="${subdirs} performance-test test"
subdirs="${subdirs} bindings"
# For a non-srcdir configure invocation (such as ../configure), create
# the directory structure and copy Makefiles.
if [ "$srcdir" != "." ]; then
+ NOTMUCH_BUILDDIR=$PWD
+
for dir in . ${subdirs}; do
mkdir -p "$dir"
cp "$srcdir"/"$dir"/Makefile.local "$dir"
cp "$srcdir"/"$dir"/Makefile "$dir"
done
- # Easiest way to get the test suite to work is to just copy the
- # whole thing into the build directory.
- cp -a "$srcdir"/test/* test
-
# Emacs only likes to generate compiled files next to the .el files
# by default so copy these as well (which is not ideal).
cp -a "$srcdir"/emacs/*.el emacs
+
+ # We were not able to create fully working Makefile using ruby mkmf.rb
+ # so ruby bindings source files are copied as well (ditto -- not ideal).
+ mkdir bindings/ruby
+ cp -a "$srcdir"/bindings/ruby/*.[ch] bindings/ruby
+ cp -a "$srcdir"/bindings/ruby/extconf.rb bindings/ruby
+
+ # Use the same hack to replicate python-cffi source for
+ # out-of-tree builds (again, not ideal).
+ mkdir bindings/python-cffi
+ cp -a "$srcdir"/bindings/python-cffi/tests \
+ "$srcdir"/bindings/python-cffi/notmuch2 \
+ "$srcdir"/bindings/python-cffi/setup.py \
+ bindings/python-cffi/
+else
+ NOTMUCH_BUILDDIR=$NOTMUCH_SRCDIR
fi
# Set several defaults (optionally specified by the user in
# environment variables)
+BASHCMD=${BASHCMD:-bash}
+PERL=${PERL:-perl}
CC=${CC:-cc}
CXX=${CXX:-c++}
CFLAGS=${CFLAGS:--g -O2}
CXXFLAGS_for_sh=${CXXFLAGS:-${CFLAGS}}
CXXFLAGS=${CXXFLAGS:-\$(CFLAGS)}
LDFLAGS=${LDFLAGS:-}
-XAPIAN_CONFIG=${XAPIAN_CONFIG:-xapian-config}
+XAPIAN_CONFIG=${XAPIAN_CONFIG:-}
PYTHON=${PYTHON:-}
+RUBY=${RUBY:-ruby}
# We don't allow the EMACS or GZIP Makefile variables inherit values
# from the environment as we do with CC and CXX above. The reason is
PREFIX=/usr/local
LIBDIR=
WITH_DOCS=1
+WITH_API_DOCS=1
+WITH_PYTHON_DOCS=1
WITH_EMACS=1
+WITH_DESKTOP=1
WITH_BASH=1
+WITH_RPATH=1
WITH_RUBY=1
WITH_ZSH=1
+WITH_RETRY_LOCK=1
usage ()
{
library. [$XAPIAN_CONFIG]
PYTHON Name of python command to use in
configure and the test suite.
+ RUBY Name of ruby command to use in
+ configure and the test suite.
Additionally, various options can be specified on the configure
command line.
--libdir=DIR Install libraries to DIR [PREFIX/lib]
--includedir=DIR Install header files to DIR [PREFIX/include]
--mandir=DIR Install man pages to DIR [PREFIX/share/man]
+ --infodir=DIR Install man pages to DIR [PREFIX/share/man]
--sysconfdir=DIR Read-only single-machine data [PREFIX/etc]
--emacslispdir=DIR Emacs code [PREFIX/share/emacs/site-lisp]
--emacsetcdir=DIR Emacs miscellaneous files [PREFIX/share/emacs/site-lisp]
- --bashcompletiondir=DIR Bash completions files [SYSCONFDIR/bash_completion.d]
- --zshcompletiondir=DIR Zsh completions files [PREFIX/share/zsh/functions/Completion/Unix]
+ --bashcompletiondir=DIR Bash completions files [PREFIX/share/bash-completion/completions]
+ --zshcompletiondir=DIR Zsh completions files [PREFIX/share/zsh/site-functions]
Some features can be disabled (--with-feature=no is equivalent to
--without-feature) :
--without-bash-completion Do not install bash completions files
- --without-docs Do not install documentation and man pages
+ --without-docs Do not install documentation
+ --without-api-docs Do not install API man page
--without-emacs Do not install lisp file
+ --without-desktop Do not install desktop file
--without-ruby Do not install ruby bindings
--without-zsh-completion Do not install zsh completions files
+ --without-retry-lock Do not use blocking xapian opens, even if available
Additional options are accepted for compatibility with other
configure-script calling conventions, but don't do anything yet:
--build=<cpu>-<vendor>-<os> Currently ignored
--host=<cpu>-<vendor>-<os> Currently ignored
- --infodir=DIR Currently ignored
--datadir=DIR Currently ignored
--localstatedir=DIR Currently ignored
--libexecdir=DIR Currently ignored
INCLUDEDIR="${option#*=}"
elif [ "${option%%=*}" = '--mandir' ] ; then
MANDIR="${option#*=}"
+ elif [ "${option%%=*}" = '--infodir' ] ; then
+ INFODIR="${option#*=}"
elif [ "${option%%=*}" = '--sysconfdir' ] ; then
SYSCONFDIR="${option#*=}"
elif [ "${option%%=*}" = '--emacslispdir' ] ; then
elif [ "${option%%=*}" = '--with-docs' ]; then
if [ "${option#*=}" = 'no' ]; then
WITH_DOCS=0
+ WITH_API_DOCS=0
else
WITH_DOCS=1
fi
elif [ "${option}" = '--without-docs' ] ; then
WITH_DOCS=0
+ WITH_API_DOCS=0
+ elif [ "${option%%=*}" = '--with-api-docs' ]; then
+ if [ "${option#*=}" = 'no' ]; then
+ WITH_API_DOCS=0
+ else
+ WITH_API_DOCS=1
+ fi
+ elif [ "${option}" = '--without-api-docs' ] ; then
+ WITH_API_DOCS=0
elif [ "${option%%=*}" = '--with-emacs' ]; then
if [ "${option#*=}" = 'no' ]; then
WITH_EMACS=0
fi
elif [ "${option}" = '--without-emacs' ] ; then
WITH_EMACS=0
+ elif [ "${option%%=*}" = '--with-desktop' ]; then
+ if [ "${option#*=}" = 'no' ]; then
+ WITH_DESKTOP=0
+ else
+ WITH_DESKTOP=1
+ fi
+ elif [ "${option}" = '--without-desktop' ] ; then
+ WITH_DESKTOP=0
elif [ "${option%%=*}" = '--with-bash-completion' ]; then
if [ "${option#*=}" = 'no' ]; then
WITH_BASH=0
fi
elif [ "${option}" = '--without-bash-completion' ] ; then
WITH_BASH=0
+ elif [ "${option%%=*}" = '--with-rpath' ]; then
+ if [ "${option#*=}" = 'no' ]; then
+ WITH_RPATH=0
+ else
+ WITH_RPATH=1
+ fi
+ elif [ "${option}" = '--without-rpath' ] ; then
+ WITH_RPATH=0
elif [ "${option%%=*}" = '--with-ruby' ]; then
if [ "${option#*=}" = 'no' ]; then
WITH_RUBY=0
fi
elif [ "${option}" = '--without-ruby' ] ; then
WITH_RUBY=0
+ elif [ "${option%%=*}" = '--with-retry-lock' ]; then
+ if [ "${option#*=}" = 'no' ]; then
+ WITH_RETRY_LOCK=0
+ else
+ WITH_RETRY_LOCK=1
+ fi
+ elif [ "${option}" = '--without-retry-lock' ] ; then
+ WITH_RETRY_LOCK=0
elif [ "${option%%=*}" = '--with-zsh-completion' ]; then
if [ "${option#*=}" = 'no' ]; then
WITH_ZSH=0
true
elif [ "${option%%=*}" = '--host' ] ; then
true
- elif [ "${option%%=*}" = '--infodir' ] ; then
+ elif [ "${option%%=*}" = '--bindir' ] ; then
+ true
+ elif [ "${option%%=*}" = '--sbindir' ] ; then
true
elif [ "${option%%=*}" = '--datadir' ] ; then
true
elif [ "${option%%=*}" = '--localstatedir' ] ; then
true
+ elif [ "${option%%=*}" = '--sharedstatedir' ] ; then
+ true
elif [ "${option%%=*}" = '--libexecdir' ] ; then
true
+ elif [ "${option%%=*}" = '--exec-prefix' ] ; then
+ true
+ elif [ "${option%%=*}" = '--program-prefix' ] ; then
+ true
elif [ "${option}" = '--disable-maintainer-mode' ] ; then
true
elif [ "${option}" = '--disable-dependency-tracking' ] ; then
libdir_expanded="${PREFIX}/lib"
else
# very non-general variable expansion
- libdir_expanded=`echo "$LIBDIR" | sed "s|\\${prefix}|${PREFIX}|g; s|\\$prefix/|${PREFIX}/|; s|//*|/|g"`
+ libdir_expanded=$(printf %s "$LIBDIR" | sed "s|\${prefix}|${PREFIX}|; s|\$prefix\>|${PREFIX}|; s|//*|/|g")
fi
cat <<EOF
printf "int main(void){return 0;}\n" > minimal.c
printf "Sanity checking C compilation environment... "
-if ${CC} ${CFLAGS} ${CPPFLAGS} minimal.c ${LDFLAGS} -o minimal > /dev/null 2>&1
+test_cmdline="${CC} ${CFLAGS} ${CPPFLAGS} minimal.c ${LDFLAGS} -o minimal"
+if ${test_cmdline} > /dev/null 2>&1
then
printf "OK.\n"
else
printf "Fail.\n"
errors=$((errors + 1))
+ printf Executed:; printf ' %s' ${test_cmdline}; echo
+ ${test_cmdline}
fi
printf "Sanity checking C++ compilation environment... "
-if ${CXX} ${CXXFLAGS_for_sh} ${CPPFLAGS} minimal.c ${LDFLAGS} -o minimal > /dev/null 2>&1
+test_cmdline="${CXX} ${CXXFLAGS_for_sh} ${CPPFLAGS} minimal.c ${LDFLAGS} -o minimal"
+if ${test_cmdline} > /dev/null 2>&1
then
printf "OK.\n"
else
printf "Fail.\n"
errors=$((errors + 1))
+ printf Executed:; printf ' %s' ${test_cmdline}; echo
+ ${test_cmdline}
fi
+unset test_cmdline
if [ $errors -gt 0 ]; then
cat <<EOF
exit 1
fi
+printf "C compiler supports address sanitizer... "
+test_cmdline="${CC} ${CFLAGS} ${CPPFLAGS} -fsanitize=address minimal.c ${LDFLAGS} -o minimal"
+if ${test_cmdline} >/dev/null 2>&1 && ./minimal
+then
+ printf "Yes.\n"
+ have_asan=1
+else
+ printf "Nope, skipping those tests.\n"
+ have_asan=0
+fi
+unset test_cmdline
+
printf "Reading libnotmuch version from source... "
cat > _libversion.c <<EOF
#include <stdio.h>
return 0;
}
EOF
-if ${CC} ${CFLAGS} _libversion.c -o _libversion > /dev/null 2>&1 && \
- ./_libversion > _libversion.sh && . ./_libversion.sh
+if ${CC} ${CFLAGS} -I"$srcdir" _libversion.c -o _libversion > /dev/null 2>&1 \
+ && ./_libversion > _libversion.sh && . ./_libversion.sh
then
printf "OK.\n"
else
have_pkg_config=0
fi
-printf "Checking for Xapian development files... "
+
+
+printf "Checking for Xapian development files (>= 1.4.0)... "
have_xapian=0
-for xapian_config in ${XAPIAN_CONFIG}; do
+for xapian_config in ${XAPIAN_CONFIG} xapian-config; do
if ${xapian_config} --version > /dev/null 2>&1; then
xapian_version=$(${xapian_config} --version | sed -e 's/.* //')
- printf "Yes (%s).\n" ${xapian_version}
- have_xapian=1
- xapian_cxxflags=$(${xapian_config} --cxxflags)
- xapian_ldflags=$(${xapian_config} --libs)
+ case $xapian_version in
+ 1.[4-9]* | 1.[1-9][0-9]* | [2-9]* | [1-9][0-9]*)
+ printf "Yes (%s).\n" ${xapian_version}
+ have_xapian=1
+ xapian_cxxflags=$(${xapian_config} --cxxflags)
+ xapian_ldflags=$(${xapian_config} --libs)
+ ;;
+ *) printf "Xapian $xapian_version not supported... "
+ esac
break
fi
done
errors=$((errors + 1))
fi
-# Compaction is only supported on Xapian > 1.2.6
-have_xapian_compact=0
-if [ ${have_xapian} = "1" ]; then
- printf "Checking for Xapian compaction support... "
- case "${xapian_version}" in
- 0.*|1.[01].*|1.2.[0-5])
- printf "No (only available with Xapian > 1.2.6).\n" ;;
- [1-9]*.[0-9]*.[0-9]*)
- have_xapian_compact=1
- printf "Yes.\n" ;;
- *)
- printf "Unknown version.\n" ;;
- esac
-fi
-
-
-# we need to have a version >= 2.6.5 to avoid a crypto bug. We need
-# 2.6.7 for permissive "From " header handling.
-GMIME_MINVER=2.6.7
+GMIME_MINVER=3.0.3
-printf "Checking for GMime development files... "
-if pkg-config --exists "gmime-2.6 >= $GMIME_MINVER"; then
+printf "Checking for GMime development files (>= $GMIME_MINVER)... "
+if pkg-config --exists "gmime-3.0 >= $GMIME_MINVER"; then
printf "Yes.\n"
have_gmime=1
- gmime_cflags=$(pkg-config --cflags gmime-2.6)
- gmime_ldflags=$(pkg-config --libs gmime-2.6)
+ gmime_cflags=$(pkg-config --cflags gmime-3.0)
+ gmime_ldflags=$(pkg-config --libs gmime-3.0)
+
+ printf "Checking for GMime session key extraction support... "
+
+ cat > _check_session_keys.c <<EOF
+#include <gmime/gmime.h>
+#include <stdio.h>
+
+int main () {
+ GError *error = NULL;
+ GMimeParser *parser = NULL;
+ GMimeMultipartEncrypted *body = NULL;
+ GMimeDecryptResult *decrypt_result = NULL;
+ GMimeObject *output = NULL;
+
+ g_mime_init ();
+ parser = g_mime_parser_new ();
+ g_mime_parser_init_with_stream (parser, g_mime_stream_file_open("$srcdir/test/corpora/crypto/basic-encrypted.eml", "r", &error));
+ if (error) return !! fprintf (stderr, "failed to instantiate parser with test/corpora/crypto/basic-encrypted.eml\n");
+
+ body = GMIME_MULTIPART_ENCRYPTED(g_mime_message_get_mime_part (g_mime_parser_construct_message (parser, NULL)));
+ if (body == NULL) return !! fprintf (stderr, "did not find a multipart encrypted message\n");
+
+ output = g_mime_multipart_encrypted_decrypt (body, GMIME_DECRYPT_EXPORT_SESSION_KEY, NULL, &decrypt_result, &error);
+ if (error || output == NULL) return !! fprintf (stderr, "decryption failed\n");
+
+ if (decrypt_result == NULL) return !! fprintf (stderr, "no GMimeDecryptResult found\n");
+ if (decrypt_result->session_key == NULL) return !! fprintf (stderr, "GMimeDecryptResult has no session key\n");
+
+ printf ("%s\n", decrypt_result->session_key);
+ return 0;
+}
+EOF
+ if ! TEMP_GPG=$(mktemp -d "${TMPDIR:-/tmp}/notmuch.XXXXXX"); then
+ printf 'No.\nCould not make tempdir for testing session-key support.\n'
+ errors=$((errors + 1))
+ elif ${CC} ${CFLAGS} ${gmime_cflags} _check_session_keys.c ${gmime_ldflags} -o _check_session_keys \
+ && GNUPGHOME=${TEMP_GPG} gpg --batch --quiet --import < "$srcdir"/test/gnupg-secret-key.asc \
+ && SESSION_KEY=$(GNUPGHOME=${TEMP_GPG} ./_check_session_keys) \
+ && [ $SESSION_KEY = 9:0BACD64099D1468AB07C796F0C0AC4851948A658A15B34E803865E9FC635F2F5 ]
+ then
+ printf "OK.\n"
+ else
+ cat <<EOF
+No.
+*** Error: Could not extract session keys from encrypted message.
+
+This is likely due to your GMime having been built against a old
+version of GPGME.
+
+Please try to rebuild your version of GMime against a more recent
+version of GPGME (at least GPGME 1.8.0).
+EOF
+ if command -v gpgme-config >/dev/null; then
+ printf 'Your current GPGME development version is: %s\n' "$(gpgme-config --version)"
+ else
+ printf 'You do not have the GPGME development libraries installed.\n'
+ fi
+ errors=$((errors + 1))
+ fi
+ if [ -n "$TEMP_GPG" -a -d "$TEMP_GPG" ]; then
+ rm -rf "$TEMP_GPG"
+ fi
+
+ cat > _check_gmime_cert.c <<EOF
+#include <stdio.h>
+#include <gmime/gmime.h>
+
+int main () {
+ GError *error = NULL;
+ GMimeParser *parser = NULL;
+ GMimeApplicationPkcs7Mime *body = NULL;
+ GMimeSignatureList *sig_list = NULL;
+ GMimeSignature *sig = NULL;
+ GMimeCertificate *cert = NULL;
+ GMimeObject *output = NULL;
+ GMimeValidity validity = GMIME_VALIDITY_UNKNOWN;
+ int len;
+
+ g_mime_init ();
+ parser = g_mime_parser_new ();
+ g_mime_parser_init_with_stream (parser, g_mime_stream_file_open("$srcdir/test/corpora/pkcs7/smime-onepart-signed.eml", "r", &error));
+ if (error) return !! fprintf (stderr, "failed to instantiate parser with test/corpora/pkcs7/smime-onepart-signed.eml\n");
+
+ body = GMIME_APPLICATION_PKCS7_MIME(g_mime_message_get_mime_part (g_mime_parser_construct_message (parser, NULL)));
+ if (body == NULL) return !! fprintf (stderr, "did not find a application/pkcs7 message\n");
+
+ sig_list = g_mime_application_pkcs7_mime_verify (body, GMIME_VERIFY_NONE, &output, &error);
+ if (error || output == NULL) return !! fprintf (stderr, "verify failed\n");
+
+ if (sig_list == NULL) return !! fprintf (stderr, "no GMimeSignatureList found\n");
+ len = g_mime_signature_list_length (sig_list);
+ if (len != 1) return !! fprintf (stderr, "expected 1 signature, got %d\n", len);
+ sig = g_mime_signature_list_get_signature (sig_list, 0);
+ if (sig == NULL) return !! fprintf (stderr, "no GMimeSignature found at position 0\n");
+ cert = g_mime_signature_get_certificate (sig);
+ if (cert == NULL) return !! fprintf (stderr, "no GMimeCertificate found\n");
+#ifdef CHECK_VALIDITY
+ validity = g_mime_certificate_get_id_validity (cert);
+ if (validity != GMIME_VALIDITY_FULL) return !! fprintf (stderr, "Got validity %d, expected %d\n", validity, GMIME_VALIDITY_FULL);
+#endif
+#ifdef CHECK_EMAIL
+ const char *email = g_mime_certificate_get_email (cert);
+ if (! email) return !! fprintf (stderr, "no email returned");
+ if (email[0] == '<') return 2;
+#endif
+ return 0;
+}
+EOF
+
+ # see https://github.com/jstedfast/gmime/pull/90
+ # should be fixed in GMime in 3.2.7, but some distros might patch
+ printf "Checking for GMime X.509 certificate validity... "
+
+ if ! TEMP_GPG=$(mktemp -d "${TMPDIR:-/tmp}/notmuch.XXXXXX"); then
+ printf 'No.\nCould not make tempdir for testing X.509 certificate validity support.\n'
+ errors=$((errors + 1))
+ elif ${CC} -DCHECK_VALIDITY ${CFLAGS} ${gmime_cflags} _check_gmime_cert.c ${gmime_ldflags} -o _check_x509_validity \
+ && echo disable-crl-checks > "$TEMP_GPG/gpgsm.conf" \
+ && echo "4D:E0:FF:63:C0:E9:EC:01:29:11:C8:7A:EE:DA:3A:9A:7F:6E:C1:0D S" >> "$TEMP_GPG/trustlist.txt" \
+ && GNUPGHOME=${TEMP_GPG} gpgsm --batch --quiet --import < "$srcdir"/test/smime/ca.crt
+ then
+ if GNUPGHOME=${TEMP_GPG} ./_check_x509_validity; then
+ gmime_x509_cert_validity=1
+ printf "Yes.\n"
+ else
+ gmime_x509_cert_validity=0
+ printf "No.\n"
+ if pkg-config --exists "gmime-3.0 >= 3.2.7"; then
+ cat <<EOF
+*** Error: GMime fails to calculate X.509 certificate validity, and
+is later than 3.2.7, which should have fixed this issue.
+
+Please follow up on https://github.com/jstedfast/gmime/pull/90 with
+more details.
+EOF
+ errors=$((errors + 1))
+ fi
+ fi
+ printf "Checking whether GMime emits email addresses with angle brackets... "
+ if ${CC} -DCHECK_EMAIL ${CFLAGS} ${gmime_cflags} _check_gmime_cert.c ${gmime_ldflags} -o _check_email &&
+ GNUPGHOME=${TEMP_GPG} ./_check_email; then
+ gmime_emits_angle_brackets=0
+ printf "No.\n"
+ else
+ gmime_emits_angle_brackets=1
+ printf "Yes.\n"
+ fi
+ else
+ printf 'No.\nFailed to set up gpgsm for testing X.509 certificate validity support.\n'
+ errors=$((errors + 1))
+ fi
+ if [ -n "$TEMP_GPG" -a -d "$TEMP_GPG" ]; then
+ rm -rf "$TEMP_GPG"
+ fi
+
+ # see https://dev.gnupg.org/T3464
+ # there are problems verifying signatures when decrypting with session keys with GPGME 1.13.0 and 1.13.1
+ printf "Checking signature verification when decrypting using session keys... "
+
+ cat > _verify_sig_with_session_key.c <<EOF
+#include <stdio.h>
+#include <gmime/gmime.h>
+
+int main () {
+ GError *error = NULL;
+ GMimeParser *parser = NULL;
+ GMimeMultipartEncrypted *body = NULL;
+ GMimeDecryptResult *result = NULL;
+ GMimeSignatureList *sig_list = NULL;
+ GMimeSignature *sig = NULL;
+ GMimeObject *output = NULL;
+ GMimeSignatureStatus status;
+ int len;
+
+ g_mime_init ();
+ parser = g_mime_parser_new ();
+ g_mime_parser_init_with_stream (parser, g_mime_stream_file_open("$srcdir/test/corpora/crypto/encrypted-signed.eml", "r", &error));
+ if (error) return !! fprintf (stderr, "failed to instantiate parser with test/corpora/pkcs7/smime-onepart-signed.eml\n");
+
+ body = GMIME_MULTIPART_ENCRYPTED(g_mime_message_get_mime_part (g_mime_parser_construct_message (parser, NULL)));
+ if (body == NULL) return !! fprintf (stderr, "did not find a multipart/encrypted message\n");
+
+ output = g_mime_multipart_encrypted_decrypt (body, GMIME_DECRYPT_NONE, "9:13607E4217515A70EC8DF9DBC16C5327B94577561D98AD1246FA8756659C7899", &result, &error);
+ if (error || output == NULL) return !! fprintf (stderr, "decrypt failed\n");
+
+ sig_list = g_mime_decrypt_result_get_signatures (result);
+ if (sig_list == NULL) return !! fprintf (stderr, "sig_list is NULL\n");
+
+ if (sig_list == NULL) return !! fprintf (stderr, "no GMimeSignatureList found\n");
+ len = g_mime_signature_list_length (sig_list);
+ if (len != 1) return !! fprintf (stderr, "expected 1 signature, got %d\n", len);
+ sig = g_mime_signature_list_get_signature (sig_list, 0);
+ if (sig == NULL) return !! fprintf (stderr, "no GMimeSignature found at position 0\n");
+ status = g_mime_signature_get_status (sig);
+ if (status & GMIME_SIGNATURE_STATUS_KEY_MISSING) return !! fprintf (stderr, "signature status contains KEY_MISSING (see https://dev.gnupg.org/T3464)\n");
+
+ return 0;
+}
+EOF
+ if ! TEMP_GPG=$(mktemp -d "${TMPDIR:-/tmp}/notmuch.XXXXXX"); then
+ printf 'No.\nCould not make tempdir for testing signature verification when decrypting with session keys.\n'
+ errors=$((errors + 1))
+ elif ${CC} ${CFLAGS} ${gmime_cflags} _verify_sig_with_session_key.c ${gmime_ldflags} -o _verify_sig_with_session_key \
+ && GNUPGHOME=${TEMP_GPG} gpg --batch --quiet --import < "$srcdir"/test/gnupg-secret-key.asc \
+ && rm -f ${TEMP_GPG}/private-keys-v1.d/*.key
+ then
+ if GNUPGHOME=${TEMP_GPG} ./_verify_sig_with_session_key; then
+ gmime_verify_with_session_key=1
+ printf "Yes.\n"
+ else
+ gmime_verify_with_session_key=0
+ printf "No.\n"
+ cat <<EOF
+*** Error: GMime fails to verify signatures when decrypting with a session key.
+
+This is most likely due to a buggy version of GPGME, which should be fixed in 1.13.2 or later.
+See https://dev.gnupg.org/T3464 for more details.
+EOF
+ fi
+ else
+ printf 'No.\nFailed to set up gpg for testing signature verification while decrypting with a session key.\n'
+ errors=$((errors + 1))
+ fi
+ if [ -n "$TEMP_GPG" -a -d "$TEMP_GPG" ]; then
+ rm -rf "$TEMP_GPG"
+ fi
else
have_gmime=0
printf "No.\n"
if pkg-config --exists 'glib-2.0 >= 2.22'; then
printf "Yes.\n"
have_glib=1
- glib_cflags=$(pkg-config --cflags glib-2.0)
- glib_ldflags=$(pkg-config --libs glib-2.0)
+ # these are included in gmime cflags and ldflags
+ # glib_cflags=$(pkg-config --cflags glib-2.0)
+ # glib_ldflags=$(pkg-config --libs glib-2.0)
else
printf "No.\n"
errors=$((errors + 1))
fi
if ! pkg-config --exists zlib; then
- ${CC} ${zlib_cflags} -o compat/gen_zlib_pc \
- "$srcdir"/compat/gen_zlib_pc.c ${zlib_ldflags} > /dev/null 2>&1 &&
+ ${CC} -o compat/gen_zlib_pc "$srcdir"/compat/gen_zlib_pc.c >/dev/null 2>&1 &&
compat/gen_zlib_pc > compat/zlib.pc &&
- PKG_CONFIG_PATH="$PKG_CONFIG_PATH":compat &&
+ PKG_CONFIG_PATH=${PKG_CONFIG_PATH:+$PKG_CONFIG_PATH:}compat &&
export PKG_CONFIG_PATH
rm -f compat/gen_zlib_pc
fi
errors=$((errors + 1))
fi
+printf "Checking for bash... "
+if command -v ${BASHCMD} > /dev/null; then
+ have_bash=1
+ bash_absolute=$(command -v ${BASHCMD})
+ printf "Yes (%s).\n" "$bash_absolute"
+else
+ have_bash=0
+ bash_absolute=
+ printf "No. (%s not found)\n" "${BASHCMD}"
+fi
+
+printf "Checking for perl... "
+if command -v ${PERL} > /dev/null; then
+ have_perl=1
+ perl_absolute=$(command -v ${PERL})
+ printf "Yes (%s).\n" "$perl_absolute"
+else
+ have_perl=0
+ perl_absolute=
+ printf "No. (%s not found)\n" "${PERL}"
+fi
+
printf "Checking for python... "
have_python=0
-for name in ${PYTHON} python python2 python3; do
+for name in ${PYTHON} python3 python python2; do
if command -v $name > /dev/null; then
have_python=1
python=$name
- printf "Yes ($name).\n"
+ printf "Yes (%s).\n" "$name"
break
fi
done
errors=$((errors + 1))
fi
+have_python3=0
+if [ $have_python -eq 1 ]; then
+ printf "Checking for python3 (>= 3.5)..."
+ if "$python" -c 'import sys, sysconfig; assert sys.version_info >= (3,5)'; >/dev/null 2>&1; then
+ printf "Yes.\n"
+ have_python3=1
+ else
+ printf "No (will not install CFFI-based python bindings).\n"
+ fi
+fi
+
+have_python3_dev=0
+if [ $have_python3 -eq 1 ]; then
+ printf "Checking for python3 version ..."
+ python3_version=$("$python" -c 'import sysconfig; print(sysconfig.get_python_version());')
+ printf "(%s)\n" $python3_version
+
+ printf "Checking for python $python3_version development files..."
+ if pkg-config --exists "python-$python3_version"; then
+ have_python3_dev=1
+ printf "Yes.\n"
+ else
+ have_python3_dev=0
+ printf "No (will not install CFFI-based python bindings).\n"
+ fi
+fi
+
+have_python3_cffi=0
+have_python3_pytest=0
+if [ $have_python3_dev -eq 1 ]; then
+ printf "Checking for python3 cffi and setuptools... "
+ if "$python" -c 'import cffi,setuptools; cffi.FFI().verify()' >/dev/null 2>&1; then
+ printf "Yes.\n"
+ have_python3_cffi=1
+ WITH_PYTHON_DOCS=1
+ else
+ WITH_PYTHON_DOCS=0
+ printf "No (will not install CFFI-based python bindings).\n"
+ fi
+ rm -rf __pycache__ # cffi.FFI().verify() uses this space
+
+ printf "Checking for python3 pytest (>= 3.0)... "
+ conf=$(mktemp)
+ printf "[pytest]\nminversion=3.0\n" > $conf
+ if "$python" -m pytest -c $conf --version >/dev/null 2>&1; then
+ printf "Yes.\n"
+ have_python3_pytest=1
+ else
+ printf "No (will not test CFFI-based python bindings).\n"
+ fi
+ rm -f $conf
+fi
+
printf "Checking for valgrind development files... "
if pkg-config --exists valgrind; then
printf "Yes.\n"
else
printf "No (but that's fine).\n"
have_valgrind=0
+ valgrind_cflags=
fi
printf "Checking for bash-completion (>= 1.90)... "
WITH_BASH=0
fi
-if [ -z "${EMACSLISPDIR}" ]; then
- EMACSLISPDIR='$(prefix)/share/emacs/site-lisp'
+printf "Checking for sfsexp... "
+if pkg-config --exists sfsexp; then
+ printf "Yes.\n"
+ have_sfsexp=1
+ sfsexp_cflags=$(pkg-config --cflags sfsexp)
+ sfsexp_ldflags=$(pkg-config --libs sfsexp)
+else
+ printf "No (will not enable s-expression queries).\n"
+ have_sfsexp=0
+ sfsexp_cflags=
+ sfsexp_ldflags=
+fi
+
+if [ -z "${EMACSLISPDIR-}" ]; then
+ EMACSLISPDIR="\$(prefix)/share/emacs/site-lisp"
fi
-if [ -z "${EMACSETCDIR}" ]; then
- EMACSETCDIR='$(prefix)/share/emacs/site-lisp'
+if [ -z "${EMACSETCDIR-}" ]; then
+ EMACSETCDIR="\$(prefix)/share/emacs/site-lisp"
fi
-printf "Checking if emacs is available... "
-if emacs --quick --batch > /dev/null 2>&1; then
- printf "Yes.\n"
- have_emacs=1
-else
- printf "No (so will not byte-compile emacs code)\n"
- have_emacs=0
+if [ $WITH_EMACS = "1" ]; then
+ printf "Checking if emacs (>= 25) is available... "
+ if emacs --quick --batch --eval '(if (< emacs-major-version 25) (kill-emacs 1))' > /dev/null 2>&1; then
+ printf "Yes.\n"
+ else
+ printf "No (disabling emacs related parts of build)\n"
+ WITH_EMACS=0
+ fi
fi
have_doxygen=0
-if [ $WITH_DOCS = "1" ] ; then
+if [ $WITH_API_DOCS = "1" ] ; then
printf "Checking if doxygen is available... "
if command -v doxygen > /dev/null; then
printf "Yes.\n"
have_ruby_dev=0
if [ $WITH_RUBY = "1" ] ; then
printf "Checking for ruby development files... "
- if ruby -e "require 'mkmf'"> /dev/null 2>&1; then
+ if ${RUBY} -e "require 'mkmf'"> /dev/null 2>&1; then
printf "Yes.\n"
have_ruby_dev=1
else
fi
have_sphinx=0
+have_makeinfo=0
+have_install_info=0
if [ $WITH_DOCS = "1" ] ; then
printf "Checking if sphinx is available and supports nroff output... "
if command -v sphinx-build > /dev/null && ${python} -m sphinx.writers.manpage > /dev/null 2>&1 ; then
else
printf "No (so will not install man pages).\n"
fi
+ printf "Checking if makeinfo is available... "
+ if command -v makeinfo > /dev/null; then
+ printf "Yes.\n"
+ have_makeinfo=1
+ else
+ printf "No (so will not build info pages).\n"
+ fi
+ printf "Checking if install-info is available... "
+ if command -v install-info > /dev/null; then
+ printf "Yes.\n"
+ have_install_info=1
+ else
+ printf "No (so will not install info pages).\n"
+ fi
+fi
+
+if [ $WITH_DESKTOP = "1" ]; then
+ printf "Checking if desktop-file-install is available... "
+ if command -v desktop-file-install > /dev/null; then
+ printf "Yes.\n"
+ else
+ printf "No (so will not install .desktop file).\n"
+ WITH_DESKTOP=0
+ fi
+fi
+
+printf "Checking for cppcheck... "
+if command -v cppcheck > /dev/null; then
+ have_cppcheck=1
+ printf "Yes.\n"
+else
+ have_cppcheck=0
+ printf "No.\n"
fi
libdir_in_ldconfig=0
printf "Checking which platform we are on... "
-uname=`uname`
+uname=$(uname)
if [ $uname = "Darwin" ] ; then
printf "Mac OS X.\n"
platform=MACOSX
platform=OPENBSD
linker_resolves_library_dependencies=0
elif [ $uname = "Linux" ] || [ $uname = "GNU" ] ; then
- printf "$uname\n"
+ printf "%s\n" "$uname"
platform="$uname"
linker_resolves_library_dependencies=1
- printf "Checking for $libdir_expanded in ldconfig... "
+ printf "Checking for %s in ldconfig... " "$libdir_expanded"
ldconfig_paths=$(/sbin/ldconfig -N -X -v 2>/dev/null | sed -n -e 's,^\(/.*\):\( (.*)\)\?$,\1,p')
# Separate ldconfig_paths only on newline (not on any potential
# embedded space characters in any filenames). Note, we use a
IFS="
"
for path in $ldconfig_paths; do
- if [ "$path" = "$libdir_expanded" ]; then
+ if [ "$path" -ef "$libdir_expanded" ]; then
libdir_in_ldconfig=1
fi
done
fi
else
printf "Unknown.\n"
+ platform="$uname"
+ linker_resolves_library_dependencies=0
cat <<EOF
*** Warning: Unknown platform. Notmuch might or might not build correctly.
EOF
fi
-printf "Checking byte order... "
-cat> _byteorder.c <<EOF
-#include <stdio.h>
-#include <stdint.h>
-uint32_t test = 0x34333231;
-int main() { printf("%.4s\n", (const char*)&test); return 0; }
-EOF
-${CC} ${CFLAGS} _byteorder.c -o _byteorder > /dev/null 2>&1
-util_byte_order=$(./_byteorder)
-echo $util_byte_order
-
-rm -f _byteorder _byteorder.c
-
if [ $errors -gt 0 ]; then
cat <<EOF
echo " python interpreter"
fi
if [ $have_xapian -eq 0 ]; then
- echo " Xapian library (including development files such as headers)"
- echo " http://xapian.org/"
+ echo " Xapian library (>= version 1.4.0, including development files such as headers)"
+ echo " https://xapian.org/"
fi
if [ $have_zlib -eq 0 ]; then
echo " zlib library (>= version 1.2.5.2, including development files such as headers)"
- echo " http://zlib.net/"
+ echo " https://zlib.net/"
echo
fi
if [ $have_gmime -eq 0 ]; then
- echo " GMime 2.6 library >= $GMIME_MINVER"
+ echo " GMime library >= $GMIME_MINVER"
echo " (including development files such as headers)"
- echo " http://spruce.sourceforge.net/gmime/"
+ echo " https://github.com/jstedfast/gmime/"
echo
fi
if [ $have_glib -eq 0 ]; then
echo " Glib library >= 2.22 (including development files such as headers)"
- echo " http://ftp.gnome.org/pub/gnome/sources/glib/"
+ echo " https://ftp.gnome.org/pub/gnome/sources/glib/"
echo
fi
if [ $have_talloc -eq 0 ]; then
echo " The talloc library (including development files such as headers)"
- echo " http://talloc.samba.org/"
+ echo " https://talloc.samba.org/"
echo
fi
cat <<EOF
On Debian and similar systems:
- sudo apt-get install libxapian-dev libgmime-2.6-dev libtalloc-dev zlib1g-dev
+ sudo apt-get install libxapian-dev libgmime-3.0-dev libtalloc-dev zlib1g-dev
Or on Fedora and similar systems:
- sudo yum install xapian-core-devel gmime-devel libtalloc-devel zlib-devel
+ sudo dnf install xapian-core-devel gmime30-devel libtalloc-devel zlib-devel
On other systems, similar commands can be used, but the details of the
package names may be different.
sudo apt-get install pkg-config
Or:
- sudo yum install pkgconfig
+ sudo dnf install pkgconfig
But if pkg-config is not available for your system, then you will need
to modify the configure script to manually set the cflags and ldflags
fi
rm -f compat/have_timegm
+cat <<EOF > _time_t.c
+#include <time.h>
+#include <assert.h>
+static_assert(sizeof(time_t) >= 8, "sizeof(time_t) < 8");
+EOF
+
+printf "Checking for 64 bit time_t... "
+if ${CC} -c _time_t.c -o /dev/null
+then
+ printf "Yes.\n"
+ have_64bit_time_t=1
+else
+ printf "No.\n"
+ have_64bit_time_t=0
+fi
+
printf "Checking for dirent.d_type... "
if ${CC} -o compat/have_d_type "$srcdir"/compat/have_d_type.c > /dev/null 2>&1
then
rm -f compat/check_asctime
printf "Checking for rpath support... "
-if ${CC} -Wl,--enable-new-dtags -Wl,-rpath,/tmp/ -o minimal minimal.c >/dev/null 2>&1
+if [ $WITH_RPATH = "1" ] && ${CC} -Wl,--enable-new-dtags -Wl,-rpath,/tmp/ -o minimal minimal.c >/dev/null 2>&1
then
printf "Yes.\n"
rpath_ldflags="-Wl,--enable-new-dtags -Wl,-rpath,\$(libdir)"
WARN_CXXFLAGS="${WARN_CXXFLAGS}${WARN_CXXFLAGS:+ }${flag}"
fi
done
-printf "\n\t${WARN_CXXFLAGS}\n"
+printf "\n\t%s\n" "${WARN_CXXFLAGS}"
WARN_CFLAGS="${WARN_CXXFLAGS}"
printf "Checking for available C compiler warning flags... "
WARN_CFLAGS="${WARN_CFLAGS}${WARN_CFLAGS:+ }${flag}"
fi
done
-printf "\n\t${WARN_CFLAGS}\n"
+printf "\n\t%s\n" "${WARN_CFLAGS}"
-rm -f minimal minimal.c _libversion.c _libversion _libversion.sh
+rm -f minimal minimal.c _time_t.c _libversion.c _libversion _libversion.sh _check_session_keys.c _check_session_keys _check_x509_validity.c _check_x509_validity \
+ _verify_sig_with_session_key.c _verify_sig_with_session_key
# construct the Makefile.config
cat > Makefile.config <<EOF
# the configure script). This may be different than the build
# directory (the current directory at the time configure was run).
srcdir = ${srcdir}
+NOTMUCH_SRCDIR = ${NOTMUCH_SRCDIR}
+NOTMUCH_BUILDDIR = ${NOTMUCH_BUILDDIR}
# subdirectories to build
subdirs = ${subdirs}
# Name of python interpreter
PYTHON = ${python}
+# Name of ruby interpreter
+RUBY = ${RUBY}
+
# The prefix to which notmuch should be installed
# Note: If you change this value here, be sure to ensure that the
# LIBDIR_IN_LDCONFIG value below is still set correctly.
# LIBDIR_IN_LDCONFIG value below is still set correctly.
libdir = ${LIBDIR:=\$(prefix)/lib}
-# byte order within a 32 bit word. 1234 = little, 4321 = big, 0 = guess
-UTIL_BYTE_ORDER = ${util_byte_order}
-
# Whether libdir is in a path configured into ldconfig
LIBDIR_IN_LDCONFIG = ${libdir_in_ldconfig}
# The directory to which man pages should be installed
mandir = ${MANDIR:=\$(prefix)/share/man}
+# The directory to which man pages should be installed
+infodir = ${INFODIR:=\$(prefix)/share/info}
+
# The directory to which read-only (configuration) files should be installed
sysconfdir = ${SYSCONFDIR:=\$(prefix)/etc}
# be installed
emacsetcdir=${EMACSETCDIR}
-# Whether there's an emacs binary available for byte-compiling
-HAVE_EMACS = ${have_emacs}
+# Whether bash exists, and if so where
+HAVE_BASH = ${have_bash}
+BASH_ABSOLUTE = ${bash_absolute}
+
+# Whether perl exists, and if so where
+HAVE_PERL = ${have_perl}
+PERL_ABSOLUTE = ${perl_absolute}
# Whether there's a sphinx-build binary available for building documentation
HAVE_SPHINX=${have_sphinx}
+# Whether there's a makeinfo binary available for building info format documentation
+HAVE_MAKEINFO=${have_makeinfo}
+
+# Whether there's an install-info binary available for installing info format documentation
+HAVE_INSTALL_INFO=${have_install_info}
+
# Whether there's a doxygen binary available for building api documentation
HAVE_DOXYGEN=${have_doxygen}
desktop_dir = \$(prefix)/share/applications
# The directory to which bash completions files should be installed
-bash_completion_dir = ${BASHCOMPLETIONDIR:=\$(sysconfdir)/bash_completion.d}
+bash_completion_dir = ${BASHCOMPLETIONDIR:=\$(prefix)/share/bash-completion/completions}
# The directory to which zsh completions files should be installed
-zsh_completion_dir = ${ZSHCOMLETIONDIR:=\$(prefix)/share/zsh/functions/Completion/Unix}
+zsh_completion_dir = ${ZSHCOMLETIONDIR:=\$(prefix)/share/zsh/site-functions}
# Whether the canonicalize_file_name function is available (if not, then notmuch will
# build its own version)
HAVE_CANONICALIZE_FILE_NAME = ${have_canonicalize_file_name}
+# Whether the cppcheck static checker is available
+HAVE_CPPCHECK = ${have_cppcheck}
+
# Whether the getline function is available (if not, then notmuch will
# build its own version)
HAVE_GETLINE = ${have_getline}
# building/testing ruby bindings.
HAVE_RUBY_DEV = ${have_ruby_dev}
+# Is the python cffi package available?
+HAVE_PYTHON3_CFFI = ${have_python3_cffi}
+
+# Is the python pytest package available?
+HAVE_PYTHON3_PYTEST = ${have_python3_pytest}
+
# Whether the strcasestr function is available (if not, then notmuch will
# build its own version)
HAVE_STRCASESTR = ${have_strcasestr}
# build its own version)
HAVE_STRSEP = ${have_strsep}
+# Whether the timegm function is available (if not, then notmuch will
+# build its own version)
+HAVE_TIMEGM = ${have_timegm}
+
# Whether struct dirent has d_type (if not, then notmuch will use stat)
HAVE_D_TYPE = ${have_d_type}
-# Whether the Xapian version in use supports compaction
-HAVE_XAPIAN_COMPACT = ${have_xapian_compact}
+# Whether to have Xapian retry lock
+HAVE_XAPIAN_DB_RETRY_LOCK = ${WITH_RETRY_LOCK}
# Whether the getpwuid_r function is standards-compliant
# (if not, then notmuch will #define _POSIX_PTHREAD_SEMANTICS
# And if so, flags needed at compile time for valgrind macros
VALGRIND_CFLAGS = ${valgrind_cflags}
+# Whether the sfsexp library is available
+HAVE_SFSEXP = ${have_sfsexp}
+
+# And if so, flags needed at compile/link time for sfsexp
+SFSEXP_CFLAGS = ${sfsexp_cflags}
+SFSEXP_LDFLAGS = ${sfsexp_ldflags}
+
# Support for emacs
WITH_EMACS = ${WITH_EMACS}
+# Support for desktop file
+WITH_DESKTOP = ${WITH_DESKTOP}
+
# Support for bash completion
WITH_BASH = ${WITH_BASH}
WITH_ZSH = ${WITH_ZSH}
# Combined flags for compiling and linking against all of the above
-CONFIGURE_CFLAGS = -DHAVE_GETLINE=\$(HAVE_GETLINE) \$(GMIME_CFLAGS) \\
- -DHAVE_CANONICALIZE_FILE_NAME=\$(HAVE_CANONICALIZE_FILE_NAME) \\
- \$(ZLIB_CFLAGS) \\
- \$(TALLOC_CFLAGS) -DHAVE_VALGRIND=\$(HAVE_VALGRIND) \\
- \$(VALGRIND_CFLAGS) \\
- -DHAVE_STRCASESTR=\$(HAVE_STRCASESTR) \\
- -DHAVE_STRSEP=\$(HAVE_STRSEP) \\
- -DHAVE_D_TYPE=\$(HAVE_D_TYPE) \\
- -DSTD_GETPWUID=\$(STD_GETPWUID) \\
- -DSTD_ASCTIME=\$(STD_ASCTIME) \\
- -DHAVE_XAPIAN_COMPACT=\$(HAVE_XAPIAN_COMPACT) \\
- -DUTIL_BYTE_ORDER=\$(UTIL_BYTE_ORDER)
-
-CONFIGURE_CXXFLAGS = -DHAVE_GETLINE=\$(HAVE_GETLINE) \$(GMIME_CFLAGS) \\
- -DHAVE_CANONICALIZE_FILE_NAME=\$(HAVE_CANONICALIZE_FILE_NAME) \\
- \$(ZLIB_CFLAGS) \\
- \$(TALLOC_CFLAGS) -DHAVE_VALGRIND=\$(HAVE_VALGRIND) \\
- \$(VALGRIND_CFLAGS) \$(XAPIAN_CXXFLAGS) \\
- -DHAVE_STRCASESTR=\$(HAVE_STRCASESTR) \\
- -DHAVE_STRSEP=\$(HAVE_STRSEP) \\
- -DHAVE_D_TYPE=\$(HAVE_D_TYPE) \\
- -DSTD_GETPWUID=\$(STD_GETPWUID) \\
- -DSTD_ASCTIME=\$(STD_ASCTIME) \\
- -DHAVE_XAPIAN_COMPACT=\$(HAVE_XAPIAN_COMPACT) \\
- -DUTIL_BYTE_ORDER=\$(UTIL_BYTE_ORDER)
-
-CONFIGURE_LDFLAGS = \$(GMIME_LDFLAGS) \$(TALLOC_LDFLAGS) \$(ZLIB_LDFLAGS) \$(XAPIAN_LDFLAGS)
+COMMON_CONFIGURE_CFLAGS = \\
+ \$(GMIME_CFLAGS) \$(TALLOC_CFLAGS) \$(ZLIB_CFLAGS) \\
+ -DHAVE_VALGRIND=\$(HAVE_VALGRIND) \$(VALGRIND_CFLAGS) \\
+ -DHAVE_SFSEXP=\$(HAVE_SFSEXP) \$(SFSEXP_CFLAGS) \\
+ -DHAVE_GETLINE=\$(HAVE_GETLINE) \\
+ -DWITH_EMACS=\$(WITH_EMACS) \\
+ -DHAVE_CANONICALIZE_FILE_NAME=\$(HAVE_CANONICALIZE_FILE_NAME) \\
+ -DHAVE_STRCASESTR=\$(HAVE_STRCASESTR) \\
+ -DHAVE_STRSEP=\$(HAVE_STRSEP) \\
+ -DHAVE_TIMEGM=\$(HAVE_TIMEGM) \\
+ -DHAVE_D_TYPE=\$(HAVE_D_TYPE) \\
+ -DSTD_GETPWUID=\$(STD_GETPWUID) \\
+ -DSTD_ASCTIME=\$(STD_ASCTIME) \\
+ -DSILENCE_XAPIAN_DEPRECATION_WARNINGS \\
+ -DHAVE_XAPIAN_DB_RETRY_LOCK=\$(HAVE_XAPIAN_DB_RETRY_LOCK)
+
+CONFIGURE_CFLAGS = \$(COMMON_CONFIGURE_CFLAGS)
+
+CONFIGURE_CXXFLAGS = \$(COMMON_CONFIGURE_CFLAGS) \$(XAPIAN_CXXFLAGS)
+
+CONFIGURE_LDFLAGS = \$(GMIME_LDFLAGS) \$(TALLOC_LDFLAGS) \$(ZLIB_LDFLAGS) \$(XAPIAN_LDFLAGS) \$(SFSEXP_LDFLAGS)
EOF
# construct the sh.config
# This sh.config was automatically generated by the ./configure
# script of notmuch.
-# Whether the Xapian version in use supports compaction
-NOTMUCH_HAVE_XAPIAN_COMPACT=${have_xapian_compact}
+NOTMUCH_SRCDIR='${NOTMUCH_SRCDIR}'
+
+# Whether to have Xapian retry lock
+NOTMUCH_HAVE_XAPIAN_DB_RETRY_LOCK=${WITH_RETRY_LOCK}
+
+# Whether GMime can verify X.509 certificate validity
+NOTMUCH_GMIME_X509_CERT_VALIDITY=${gmime_x509_cert_validity}
+
+# Whether GMime emits addresses with angle brackets (with <>)
+NOTMUCH_GMIME_EMITS_ANGLE_BRACKETS=${gmime_emits_angle_brackets}
+
+# Whether GMime can verify signatures when decrypting with a session key:
+NOTMUCH_GMIME_VERIFY_WITH_SESSION_KEY=${gmime_verify_with_session_key}
+
+# Does the C compiler support the address sanitizer
+NOTMUCH_HAVE_ASAN=${have_asan}
# do we have man pages?
NOTMUCH_HAVE_MAN=$((have_sphinx))
+# Whether bash exists, and if so where
+NOTMUCH_HAVE_BASH=${have_bash}
+NOTMUCH_BASH_ABSOLUTE=${bash_absolute}
+
+# Whether time_t is 64 bits (or more)
+NOTMUCH_HAVE_64BIT_TIME_T=${have_64bit_time_t}
+
+# Whether perl exists, and if so where
+NOTMUCH_HAVE_PERL=${have_perl}
+NOTMUCH_PERL_ABSOLUTE=${perl_absolute}
+
# Name of python interpreter
NOTMUCH_PYTHON=${python}
+# Name of ruby interpreter
+NOTMUCH_RUBY=${RUBY}
+
# Are the ruby development files (and ruby) available? If not skip
# building/testing ruby bindings.
NOTMUCH_HAVE_RUBY_DEV=${have_ruby_dev}
+
+# Is the python cffi package available?
+NOTMUCH_HAVE_PYTHON3_CFFI=${have_python3_cffi}
+
+# Is the python pytest package available?
+NOTMUCH_HAVE_PYTHON3_PYTEST=${have_python3_pytest}
+
+# Is the sfsexp library available?
+NOTMUCH_HAVE_SFSEXP=${have_sfsexp}
+
+# Platform we are run on
+PLATFORM=${platform}
+EOF
+
+{
+ echo "# Generated by configure, run from doc/conf.py"
+ if [ $WITH_EMACS = "1" ]; then
+ echo "tags.add('WITH_EMACS')"
+ fi
+ if [ $WITH_PYTHON_DOCS = "1" ]; then
+ echo "tags.add('WITH_PYTHON')"
+ fi
+ printf "rsti_dir = '%s'\n" "$(cd emacs && pwd -P)"
+} > sphinx.config
+
+cat > bindings/python-cffi/_notmuch_config.py <<EOF
+# _notmuch_config.py was automatically generated by the configure
+# script in the root of the notmuch source tree.
+NOTMUCH_VERSION_FILE='${NOTMUCH_SRCDIR}/version.txt'
+NOTMUCH_INCLUDE_DIR='${NOTMUCH_SRCDIR}/lib'
+NOTMUCH_LIB_DIR='${NOTMUCH_SRCDIR}/lib'
EOF
# Finally, after everything configured, inform the user how to continue.