-Notmuch 0.13 (2012-xx-xx)
+Notmuch 0.14 (2012-08-20)
=========================
+General bug fixes
+-----------------
+
+Maildir tag synchronization
+
+ Maildir flag-to-tag synchronization now applies only to messages in
+ maildir-like directory structures. Previously, it applied to any
+ message that had a maildir "info" part, which meant it could
+ incorrectly synchronize tags for non-maildir messages, while at the
+ same time failing to synchronize tags for newly received maildir
+ messages (typically causing new messages to not receive the "unread"
+ tag).
+
Command-Line Interface
----------------------
-Reply to sender
+ The deprecated positional output file argument to `notmuch dump` has
+ been replaced with an `--output` option. The input file positional
+ argument to `notmuch restore` has been replaced with an `--input`
+ option for consistency with dump. These changes simplify the syntax
+ of dump/restore options and make them more consistent with other
+ notmuch commands.
- "notmuch reply" has gained the ability to create a reply template
- for replying just to the sender of the message, in addition to reply
- to all. The feature is available through the new command line option
- --reply-to=(all|sender).
+Emacs Interface
+---------------
+
+Search results now get re-colored when tags are updated
+
+The formatting of tags in search results can now be customized
+
+ Previously, attempting to change the format of tags in
+ `notmuch-search-result-format` would usually break tagging from
+ search-mode. We no longer make assumptions about the format.
+
+Experimental support for multi-line search result formats
+
+ It is now possible to embed newlines in
+ `notmuch-search-result-format` to make individual search results
+ span multiple lines.
+
+Next/previous in search and show now move by boundaries
+
+ All "next" and "previous" commands in the search and show modes now
+ move to the next/previous result or message boundary. This doesn't
+ change the behavior of "next", but "previous" commands will first
+ move to the beginning of the current result or message if point is
+ inside the result or message.
+
+Search now uses the JSON format internally
+
+ This should address problems with unusual characters in authors and
+ subject lines that could confuse the old text-based search parser.
+
+The date shown in search results is no longer padded before applying
+user-specified formatting
+
+ Previously, the date in the search results was padded to fixed width
+ before being formatted with `notmuch-search-result-format`. It is
+ no longer padded. The default format has been updated, but if
+ you've customized this variable, you may have to change your date
+ format from `"%s "` to `"%12s "`.
+
+The thread-id for the `target-thread` argument for `notmuch-search` should
+now be supplied without the "thread:" prefix.
+
+Notmuch 0.13.2 (2012-06-02)
+===========================
+
+Bug-fix release
+---------------
+
+Update contrib/notmuch-deliver for API changes in 0.13. This fixes a
+compilation error for this contrib package.
+
+Notmuch 0.13.1 (2012-05-29)
+===========================
+
+Bug-fix release
+---------------
+
+Fix inserting of UTF-8 characters from *text/plain* parts in reply
+
+ While notmuch gained ability to insert content from other than *text/plain*
+ parts of email whenever *text/plain* parts are not available (notably
+ HTML-only emails), replying to mails that do have *text/plain* the
+ non-ASCII characters were incorrectly decoded. This is now fixed.
+
+`notmuch_database_get_directory` and
+`notmuch_database_find_message_by_filename` now work on read-only
+databases
+
+ Previously, these functions attempted to create directory documents
+ that didn't exist and would return an error or abort when given a
+ read-only database. Now they no longer create directory documents
+ and simply return a `NULL` object if the directory does not exist,
+ as documented.
+
+Fix compilation of ruby bindings.
+
+ Revert to dynamic linking, since the statically linked bindings did
+ not work well.
+
+Notmuch 0.13 (2012-05-15)
+=========================
+
+Command-Line Interface
+----------------------
JSON reply format
- "notmuch reply" can now produce JSON output that contains the headers
+ `notmuch reply` can now produce JSON output that contains the headers
for a reply message and full information about the original message
- begin replied to. This allows MUAs to create replies intelligtently.
+ begin replied to. This allows MUAs to create replies intelligently.
For example, an MUA that can parse HTML might quote HTML parts.
- Calling notmuch reply with --format=json imposes the restriction that
+ Calling notmuch reply with `--format=json` imposes the restriction that
only a single message is returned by the search, as replying to
multiple messages does not have a well-defined behavior. The default
retains its current behavior for multiple message replies.
Tag exclusion
Tags can be automatically excluded from search results by adding them
- to the new 'search.exclude_tags' option in the Notmuch config file.
+ to the new `search.exclude_tags` option in the Notmuch config file.
This behaviour can be overridden by explicitly including an excluded
tag in your query, for example:
- notmuch search $your_query and tag:$excluded_tag
+ notmuch search $your_query and tag:$excluded_tag
- Existing users will probably want to run "notmuch setup" again to add
+ Existing users will probably want to run `notmuch setup` again to add
the new well-commented [search] section to the configuration file.
For new configurations, accepting the default setting will cause the
tags "deleted" and "spam" to be excluded, equivalent to running:
- notmuch config set search.exclude_tags deleted spam
+ notmuch config set search.exclude_tags deleted spam
Raw show format changes
- The output of show --format=raw has changed for multipart and
+ The output of show `--format=raw` has changed for multipart and
message parts. Previously, the output was a mash of somewhat-parsed
headers and transfer-decoded bodies. Now, such parts are reproduced
faithfully from the original source. Message parts (which includes
Listing configuration items
- The new "config list" command prints out all configuration items and
+ The new `config list` command prints out all configuration items and
their values.
Emacs Interface
---------------
+Changes to tagging interface
+
+ The user-facing tagging functions in the Emacs interface have been
+ normalized across all notmuch modes. The tagging functions are now
+ notmuch-search-tag in search-mode, and notmuch-show-tag in
+ show-mode. They accept a string representing a single tag change,
+ or a list of tag changes. See 'M-x describe-function notmuch-tag'
+ for more information.
+
+ NOTE: This breaks compatibility with old tagging functions, so user
+ may need to update in custom configurations.
+
Reply improvement using the JSON format
Emacs now uses the JSON reply format to create replies. It obeys
New add-on tool: notmuch-mutt
-----------------------------
-The new contrib/ tool "notmuch-mutt" provides Notmuch integration for
+The new contrib/ tool `notmuch-mutt` provides Notmuch integration for
the Mutt mail user agent. Using it, Mutt users can perform mail
search, thread reconstruction, and mail tagging/untagging without
leaving Mutt. notmuch-mutt, formerly distributed under the name
-"mutt-notmuch" by Stefano Zacchiroli, will be maintained as a notmuch
+`mutt-notmuch` by Stefano Zacchiroli, will be maintained as a notmuch
contrib/ from now on.
Library changes
The API changes detailed below break binary and source compatibility,
so libnotmuch has been bumped to version 3.0.0.
-The function notmuch_database_close has been split into
-notmuch_database_close and notmuch_database_destroy
+The function `notmuch_database_close` has been split into
+`notmuch_database_close` and `notmuch_database_destroy`
This makes it possible for long running programs to close the xapian
database and thus release the lock associated with it without
destroying the data structures obtained from it.
-notmuch_database_open, notmuch_database_create, and
-notmuch_database_get_directory now return errors
+`notmuch_database_open`, `notmuch_database_create`, and
+`notmuch_database_get_directory` now return errors
The type signatures of these functions have changed so that the
- functions now return a notmuch_status_t and take an out-argument for
+ functions now return a `notmuch_status_t` and take an out-argument for
returning the new database object or directory object.
-go bindings changes
+Go bindings changes
-------------------
Go 1 compatibility
- The go bindings and the notmuch-addrlookup utility are now
+ The go bindings and the `notmuch-addrlookup` utility are now
compatible with go 1.
Notmuch 0.12 (2012-03-20)