}
EOF
if ! TEMP_GPG=$(mktemp -d "${TMPDIR:-/tmp}/notmuch.XXXXXX"); then
- printf 'No.\nCould not make tempdir for testing session-key support.\n'
- errors=$((errors + 1))
+ printf 'No.\nCould not make tempdir for testing session-key support.\n'
+ errors=$((errors + 1))
elif ${CC} ${CFLAGS} ${gmime_cflags} _check_session_keys.c ${gmime_ldflags} -o _check_session_keys \
- && GNUPGHOME=${TEMP_GPG} gpg --batch --quiet --import < "$srcdir"/test/gnupg-secret-key.asc \
- && SESSION_KEY=$(GNUPGHOME=${TEMP_GPG} ./_check_session_keys) \
- && [ $SESSION_KEY = 9:0BACD64099D1468AB07C796F0C0AC4851948A658A15B34E803865E9FC635F2F5 ]
+ && GNUPGHOME=${TEMP_GPG} gpg --batch --quiet --import < "$srcdir"/test/gnupg-secret-key.asc \
+ && SESSION_KEY=$(GNUPGHOME=${TEMP_GPG} ./_check_session_keys) \
+ && [ $SESSION_KEY = 9:0BACD64099D1468AB07C796F0C0AC4851948A658A15B34E803865E9FC635F2F5 ]
then
- printf "OK.\n"
+ printf "OK.\n"
else
- cat <<EOF
+ cat <<EOF
No.
*** Error: Could not extract session keys from encrypted message.
Please try to rebuild your version of GMime against a more recent
version of GPGME (at least GPGME 1.8.0).
EOF
- if command -v gpgme-config >/dev/null; then
- printf 'Your current GPGME development version is: %s\n' "$(gpgme-config --version)"
- else
- printf 'You do not have the GPGME development libraries installed.\n'
- fi
- errors=$((errors + 1))
+ if command -v gpgme-config >/dev/null; then
+ printf 'Your current GPGME development version is: %s\n' "$(gpgme-config --version)"
+ else
+ printf 'You do not have the GPGME development libraries installed.\n'
+ fi
+ errors=$((errors + 1))
fi
if [ -n "$TEMP_GPG" -a -d "$TEMP_GPG" ]; then
- rm -rf "$TEMP_GPG"
+ rm -rf "$TEMP_GPG"
fi
# see https://github.com/jstedfast/gmime/pull/90
}
EOF
if ! TEMP_GPG=$(mktemp -d "${TMPDIR:-/tmp}/notmuch.XXXXXX"); then
- printf 'No.\nCould not make tempdir for testing X.509 certificate validity support.\n'
- errors=$((errors + 1))
+ printf 'No.\nCould not make tempdir for testing X.509 certificate validity support.\n'
+ errors=$((errors + 1))
elif ${CC} ${CFLAGS} ${gmime_cflags} _check_x509_validity.c ${gmime_ldflags} -o _check_x509_validity \
- && echo disable-crl-checks > "$TEMP_GPG/gpgsm.conf" \
- && echo "4D:E0:FF:63:C0:E9:EC:01:29:11:C8:7A:EE:DA:3A:9A:7F:6E:C1:0D S" >> "$TEMP_GPG/trustlist.txt" \
- && GNUPGHOME=${TEMP_GPG} gpgsm --batch --quiet --import < "$srcdir"/test/smime/ca.crt
+ && echo disable-crl-checks > "$TEMP_GPG/gpgsm.conf" \
+ && echo "4D:E0:FF:63:C0:E9:EC:01:29:11:C8:7A:EE:DA:3A:9A:7F:6E:C1:0D S" >> "$TEMP_GPG/trustlist.txt" \
+ && GNUPGHOME=${TEMP_GPG} gpgsm --batch --quiet --import < "$srcdir"/test/smime/ca.crt
then
- if GNUPGHOME=${TEMP_GPG} ./_check_x509_validity; then
- gmime_x509_cert_validity=1
- printf "Yes.\n"
- else
- gmime_x509_cert_validity=0
- printf "No.\n"
- if pkg-config --exists "gmime-3.0 >= 3.2.7"; then
- cat <<EOF
+ if GNUPGHOME=${TEMP_GPG} ./_check_x509_validity; then
+ gmime_x509_cert_validity=1
+ printf "Yes.\n"
+ else
+ gmime_x509_cert_validity=0
+ printf "No.\n"
+ if pkg-config --exists "gmime-3.0 >= 3.2.7"; then
+ cat <<EOF
*** Error: GMime fails to calculate X.509 certificate validity, and
is later than 3.2.7, which should have fixed this issue.
Please follow up on https://github.com/jstedfast/gmime/pull/90 with
more details.
EOF
- errors=$((errors + 1))
- fi
- fi
+ errors=$((errors + 1))
+ fi
+ fi
else
- printf 'No.\nFailed to set up gpgsm for testing X.509 certificate validity support.\n'
- errors=$((errors + 1))
+ printf 'No.\nFailed to set up gpgsm for testing X.509 certificate validity support.\n'
+ errors=$((errors + 1))
fi
if [ -n "$TEMP_GPG" -a -d "$TEMP_GPG" ]; then
- rm -rf "$TEMP_GPG"
+ rm -rf "$TEMP_GPG"
fi
# see https://dev.gnupg.org/T3464
}
EOF
if ! TEMP_GPG=$(mktemp -d "${TMPDIR:-/tmp}/notmuch.XXXXXX"); then
- printf 'No.\nCould not make tempdir for testing signature verification when decrypting with session keys.\n'
- errors=$((errors + 1))
+ printf 'No.\nCould not make tempdir for testing signature verification when decrypting with session keys.\n'
+ errors=$((errors + 1))
elif ${CC} ${CFLAGS} ${gmime_cflags} _verify_sig_with_session_key.c ${gmime_ldflags} -o _verify_sig_with_session_key \
- && GNUPGHOME=${TEMP_GPG} gpg --batch --quiet --import < "$srcdir"/test/gnupg-secret-key.asc \
- && rm -f ${TEMP_GPG}/private-keys-v1.d/*.key
+ && GNUPGHOME=${TEMP_GPG} gpg --batch --quiet --import < "$srcdir"/test/gnupg-secret-key.asc \
+ && rm -f ${TEMP_GPG}/private-keys-v1.d/*.key
then
- if GNUPGHOME=${TEMP_GPG} ./_verify_sig_with_session_key; then
- gmime_verify_with_session_key=1
- printf "Yes.\n"
- else
- gmime_verify_with_session_key=0
- printf "No.\n"
- cat <<EOF
+ if GNUPGHOME=${TEMP_GPG} ./_verify_sig_with_session_key; then
+ gmime_verify_with_session_key=1
+ printf "Yes.\n"
+ else
+ gmime_verify_with_session_key=0
+ printf "No.\n"
+ cat <<EOF
*** Error: GMime fails to verify signatures when decrypting with a session key.
This is most likely due to a buggy version of GPGME, which should be fixed in 1.13.2 or later.
See https://dev.gnupg.org/T3464 for more details.
EOF
- fi
+ fi
else
- printf 'No.\nFailed to set up gpg for testing signature verification while decrypting with a session key.\n'
- errors=$((errors + 1))
+ printf 'No.\nFailed to set up gpg for testing signature verification while decrypting with a session key.\n'
+ errors=$((errors + 1))
fi
if [ -n "$TEMP_GPG" -a -d "$TEMP_GPG" ]; then
- rm -rf "$TEMP_GPG"
+ rm -rf "$TEMP_GPG"
fi
else
have_gmime=0
if [ $have_python -eq 1 ]; then
printf "Checking for python3 (>= 3.5)..."
if "$python" -c 'import sys, sysconfig; assert sys.version_info >= (3,5)'; >/dev/null 2>&1; then
- printf "Yes.\n"
- have_python3=1
+ printf "Yes.\n"
+ have_python3=1
else
- printf "No (will not install CFFI-based python bindings).\n"
+ printf "No (will not install CFFI-based python bindings).\n"
fi
fi
printf "Checking for python $python3_version development files..."
if pkg-config --exists "python-$python3_version"; then
- have_python3_dev=1
- printf "Yes.\n"
+ have_python3_dev=1
+ printf "Yes.\n"
else
- have_python3_dev=0
- printf "No (will not install CFFI-based python bindings).\n"
+ have_python3_dev=0
+ printf "No (will not install CFFI-based python bindings).\n"
fi
fi
if [ $have_python3_dev -eq 1 ]; then
printf "Checking for python3 cffi and setuptools... "
if "$python" -c 'import cffi,setuptools; cffi.FFI().verify()' >/dev/null 2>&1; then
- printf "Yes.\n"
- have_python3_cffi=1
- WITH_PYTHON_DOCS=1
+ printf "Yes.\n"
+ have_python3_cffi=1
+ WITH_PYTHON_DOCS=1
else
- WITH_PYTHON_DOCS=0
- printf "No (will not install CFFI-based python bindings).\n"
+ WITH_PYTHON_DOCS=0
+ printf "No (will not install CFFI-based python bindings).\n"
fi
rm -rf __pycache__ # cffi.FFI().verify() uses this space
conf=$(mktemp)
printf "[pytest]\nminversion=3.0\n" > $conf
if "$python" -m pytest -c $conf --version >/dev/null 2>&1; then
- printf "Yes.\n"
- have_python3_pytest=1
+ printf "Yes.\n"
+ have_python3_pytest=1
else
- printf "No (will not test CFFI-based python bindings).\n"
+ printf "No (will not test CFFI-based python bindings).\n"
fi
rm -f $conf
fi
if [ $WITH_EMACS = "1" ]; then
printf "Checking if emacs (>= 25) is available... "
if emacs --quick --batch --eval '(if (< emacs-major-version 25) (kill-emacs 1))' > /dev/null 2>&1; then
- printf "Yes.\n"
+ printf "Yes.\n"
else
- printf "No (disabling emacs related parts of build)\n"
- WITH_EMACS=0
+ printf "No (disabling emacs related parts of build)\n"
+ WITH_EMACS=0
fi
fi
{
echo "# Generated by configure, run from doc/conf.py"
if [ $WITH_EMACS = "1" ]; then
- echo "tags.add('WITH_EMACS')"
+ echo "tags.add('WITH_EMACS')"
fi
if [ $WITH_PYTHON_DOCS = "1" ]; then
- echo "tags.add('WITH_PYTHON')"
+ echo "tags.add('WITH_PYTHON')"
fi
printf "rsti_dir = '%s'\n" "$(cd emacs && pwd -P)"
} > sphinx.config