X-Git-Url: https://git.cworth.org/git?a=blobdiff_plain;f=remoteusage%2Faboriginal.mdwn;h=3d012b8eed684b115b2f2adc9b5820ff52d7831e;hb=61f624d2aa54c56405d47e5a5454622639638494;hp=ef462dfee9159c60e757ec330b45a2016781e5a8;hpb=dee880643fd8d50e6c67bda0b8a43d37545efb5b;p=notmuch-wiki

diff --git a/remoteusage/aboriginal.mdwn b/remoteusage/aboriginal.mdwn
index ef462df..3d012b8 100644
--- a/remoteusage/aboriginal.mdwn
+++ b/remoteusage/aboriginal.mdwn
@@ -11,51 +11,53 @@ its own connection. As long as master ssh connection is live, slave
 can use it. Disconnecting master all future attempts to connect
 from the script will fail.
 
+At the end of this document there is information for some possible ways
+how master ssh connection can be done.
+
 ## The script
 
 Write the following code to a file, for example `remote-notmuch.sh`.
-There is just one line to that normally needs configuration:
-
-        readonly SSH_CONTROL_SOCK='~'/.ssh/master-user@host:22
-
-the options howto are presented after the script.
 
-        #!/bin/bash
+	#!/bin/bash
 
-        # http://notmuchmail.org/remoteusage/aboriginal/
+	# http://notmuchmail.org/remoteusage/aboriginal/
 
-        set -eu
+	set -eu
+	# To trace execution, uncomment next line.
+	#BASH_XTRACEFD=6; exec 6>>remote-errors; echo -- >&6; set -x
 
-        readonly SSH_CONTROL_SOCK='~'/.ssh/master-user@host:22
+	readonly SSH_CONTROL_SOCK='~'/.ssh/master-user@host:22
 
-        readonly notmuch=notmuch
+	readonly notmuch=notmuch
 
-        printf -v ARGS '%q ' "$@" # bash feature
+	printf -v ARGS '%q ' "$@" # bash feature
 
-        readonly SSH_CONTROL_ARGS='-oControlMaster=no -S '$SSH_CONTROL_SOCK
+	readonly SSH_CONTROL_ARGS='-oControlMaster=no -S '$SSH_CONTROL_SOCK
 
-        if ssh $SSH_CONTROL_ARGS 0.1 $notmuch $ARGS 2>>/dev/null
-        then exit 0
-        else ev=$?
-        fi
+	if ssh -q $SSH_CONTROL_ARGS 0.1 $notmuch $ARGS
+	then exit 0
+	else ev=$?
+	fi
 
-        # continuing here in case ssh exited with nonzero value.
+	# continuing here in case ssh exited with nonzero value.
 
-        case $* in
-         'config get user.primary_email') echo 'nobody@nowhere.invalid'; exit 0 ;;
-         'config get user.name') echo 'nobody'; exit 0 ;;
-         'count'*) echo 1; exit 0 ;;
-         'search-tags'*) echo 'errors'; exit 0 ;;
-         'search'*'--output=tags'*) echo 'errors'; exit 0 ;;
-        esac
+	case $* in
+	 'config get user.primary_email') echo 'nobody@nowhere.invalid'; exit 0 ;;
+	 'config get user.name') echo 'nobody'; exit 0 ;;
+	 'count'*'--batch'*) while read line; do echo 1; done; exit 0 ;;
+	 'count'*) echo 1; exit 0 ;;
+	 'search-tags'*) echo 'errors'; exit 0 ;;
+	 'search'*'--output=tags'*) echo 'errors'; exit 0 ;;
+	esac
 
-        if ssh $SSH_CONTROL_ARGS -O check 0.1
-        then
-         echo ' Control socket is alive but something failed during data transmission.'
-         exit $ev
-        fi
+	if ssh $SSH_CONTROL_ARGS -O check 0.1
+	then
+	 echo ' Control socket is alive but something failed during data transmission.'
+	 exit $ev
+	fi
 
-        echo " See`sed '1d;2d;s/.//;q' "$0"` for help."
+	echo " See`sed '1d;2d;s/.//;q' "$0"` for help."
+	#EOF
 
 Note the `0.1` in ssh command line. It is used to avoid any opportunistic
 behaviour ssh might do; for example if control socket is not alive ssh
@@ -67,17 +69,20 @@ address `0.1` is invalid this attempt will fail early.
 Easiest way to test this script is to run the pre-made ssh connection
 using the following command line:
 
-        ssh -M -S '~'/.ssh/master-user@host:22 [user@]remotehost
+        ssh -M -S '~'/.ssh/master-user@host:22 [user@]remotehost sleep 600
 
 (replace `[user@]remotehost` with your login info). Doing this the
-above script can be run unmodified. After the above command has been
-run on one terminal, enter `chmod +x remote-notmuch.sh` in another
-terminal and then test the script with `./remote-notmuch.sh help`
+above wrapper script can be run unmodified. After the above command has
+been run on **one terminal**, enter `chmod +x remote-notmuch.sh` in
+**another terminal** and then test the script with
+
+        ./remote-notmuch.sh help
 
-Note that the '~' is inside single quotes for a reason. In this
-case shell never expand it to `$HOME` -- ssh does it by not reading
-`$HOME` but checking the real user home directory from `/etc/passewd`.
-For security purposes this is just how it should be.
+Note that the '~' in the ssh command line above is inside single quotes
+for a reason. In this case shell never expand it to `$HOME` -- ssh does
+it by not reading `$HOME` but checking the real user home directory
+from `/etc/passwd`.  For security purposes this is just how it should
+be.
 
 ## Tune
 
@@ -105,11 +110,46 @@ to the `./remote-notmuch.sh` wrapper script testing with
 See the section *Configure Emacs on the client computer* in
 [[remoteusage|remoteusage]] how to do this. The instructions are the same.
 
-## Fun
 
-Original [BSD Licence](http://en.wikipedia.org/wiki/BSD_licenses)
-is 4-clause license.
-When 3 rd. clause was removed, the new license was not original anymore.
-Similarly, the requirement for this version are the same as in
-[[remoteusage|remoteusage]] page except the 3 rd. requirement
-(password-free login) is not effective here.
+## Creating master connection
+
+As mentioned so many times, using this solution requires one pre-made
+ssh connection in "master" mode. The simplest way is to dedicate one
+terminal for the connection with shell access to the remote machine:
+
+        ssh -M -S '~'/.ssh/master-user@host:22 [user@]remotehost
+
+One possibility is to have this dedicated terminal in a way that the
+connection has (for example 1 hour) timeout:
+
+        ssh -M -S '~'/.ssh/master-user@host:22 [user@]remotehost sleep 3600
+
+The above holds the terminal. The next alternative puts the command in
+background:
+
+        ssh -f -M -S '~'/.ssh/master-user@host:22 [user@]remotehost sleep 3600
+
+If you don't want this to timeout so soon, use a longer sleep, like 99999999
+(8 9:s, 1157 days, a bit more than 3 years).
+
+A more "exotic" solution would be to make a shell script running on remote
+machine, checking/inotifying when new mail arrives. When mail arrives it
+could send message back to local host, where a graphical client (to be written)
+pops up on display providing info about received mail (and exiting this
+graphical client connection to remote host is terminated).
+
+## Troubleshooting
+
+If you experience strange output when using from emacs first attempt to just
+run
+
+        ./remote-notmuch.sh help
+
+from command line and observe output. If it looks as it should be next uncomment
+the line
+
+        #BASH_XTRACEFD=6; exec 6>>remote-errors; echo -- >&6; set -x
+
+in `./remote-notmuch.sh` and attempt to use it from emacs again -- and then
+examine the contents of `remote-errors` in the working directory emacs was
+started.