/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2012 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* function prototypes */
local void fixedtables OF((struct inflate_state FAR *state));
-local int updatewindow OF((z_streamp strm, unsigned out));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ unsigned copy));
#ifdef BUILDFIXED
void makefixed OF((void));
#endif
-local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
unsigned len));
int ZEXPORT inflateResetKeep(strm)
output will fall in the output data, making match copies simpler and faster.
The advantage may be dependent on the size of the processor's data caches.
*/
-local int updatewindow(strm, out)
+local int updatewindow(strm, end, copy)
z_streamp strm;
-unsigned out;
+const Bytef *end;
+unsigned copy;
{
struct inflate_state FAR *state;
- unsigned copy, dist;
+ unsigned dist;
state = (struct inflate_state FAR *)strm->state;
}
/* copy state->wsize or less output bytes into the circular window */
- copy = out - strm->avail_out;
if (copy >= state->wsize) {
- zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
+ zmemcpy(state->window, end - state->wsize, state->wsize);
state->wnext = 0;
state->whave = state->wsize;
}
else {
dist = state->wsize - state->wnext;
if (dist > copy) dist = copy;
- zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
+ zmemcpy(state->window + state->wnext, end - copy, dist);
copy -= dist;
if (copy) {
- zmemcpy(state->window, strm->next_out - copy, copy);
+ zmemcpy(state->window, end - copy, copy);
state->wnext = copy;
state->whave = state->wsize;
}
bits -= bits & 7; \
} while (0)
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
- ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
- (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
/*
inflate() uses a state machine to process as much input data and generate as
much output data as possible before returning. The state machine is
int flush;
{
struct inflate_state FAR *state;
- unsigned char FAR *next; /* next input */
+ z_const unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
#endif
case DICTID:
NEEDBITS(32);
- strm->adler = state->check = REVERSE(hold);
+ strm->adler = state->check = ZSWAP32(hold);
INITBITS();
state->mode = DICT;
case DICT:
while (state->have < 19)
state->lens[order[state->have++]] = 0;
state->next = state->codes;
- state->lencode = (code const FAR *)(state->next);
+ state->lencode = (const code FAR *)(state->next);
state->lenbits = 7;
ret = inflate_table(CODES, state->lens, 19, &(state->next),
&(state->lenbits), state->work);
values here (9 and 6) without reading the comments in inftrees.h
concerning the ENOUGH constants, which depend on those values */
state->next = state->codes;
- state->lencode = (code const FAR *)(state->next);
+ state->lencode = (const code FAR *)(state->next);
state->lenbits = 9;
ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
&(state->lenbits), state->work);
state->mode = BAD;
break;
}
- state->distcode = (code const FAR *)(state->next);
+ state->distcode = (const code FAR *)(state->next);
state->distbits = 6;
ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
&(state->next), &(state->distbits), state->work);
#ifdef GUNZIP
state->flags ? hold :
#endif
- REVERSE(hold)) != state->check) {
+ ZSWAP32(hold)) != state->check) {
strm->msg = (char *)"incorrect data check";
state->mode = BAD;
break;
RESTORE();
if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
(state->mode < CHECK || flush != Z_FINISH)))
- if (updatewindow(strm, out)) {
+ if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
state->mode = MEM;
return Z_MEM_ERROR;
}
return Z_OK;
}
+int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+z_streamp strm;
+Bytef *dictionary;
+uInt *dictLength;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* copy dictionary */
+ if (state->whave && dictionary != Z_NULL) {
+ zmemcpy(dictionary, state->window + state->wnext,
+ state->whave - state->wnext);
+ zmemcpy(dictionary + state->whave - state->wnext,
+ state->window, state->wnext);
+ }
+ if (dictLength != Z_NULL)
+ *dictLength = state->whave;
+ return Z_OK;
+}
+
int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
z_streamp strm;
const Bytef *dictionary;
uInt dictLength;
{
struct inflate_state FAR *state;
- unsigned long id;
- unsigned char *next;
- unsigned avail;
+ unsigned long dictid;
int ret;
/* check state */
if (state->wrap != 0 && state->mode != DICT)
return Z_STREAM_ERROR;
- /* check for correct dictionary id */
+ /* check for correct dictionary identifier */
if (state->mode == DICT) {
- id = adler32(0L, Z_NULL, 0);
- id = adler32(id, dictionary, dictLength);
- if (id != state->check)
+ dictid = adler32(0L, Z_NULL, 0);
+ dictid = adler32(dictid, dictionary, dictLength);
+ if (dictid != state->check)
return Z_DATA_ERROR;
}
/* copy dictionary to window using updatewindow(), which will amend the
existing dictionary if appropriate */
- next = strm->next_out;
- avail = strm->avail_out;
- strm->next_out = (Bytef *)dictionary + dictLength;
- strm->avail_out = 0;
- ret = updatewindow(strm, dictLength);
- strm->avail_out = avail;
- strm->next_out = next;
+ ret = updatewindow(strm, dictionary + dictLength, dictLength);
if (ret) {
state->mode = MEM;
return Z_MEM_ERROR;
*/
local unsigned syncsearch(have, buf, len)
unsigned FAR *have;
-unsigned char FAR *buf;
+const unsigned char FAR *buf;
unsigned len;
{
unsigned got;
projects / apitrace / blobdiff