/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.6, January 29th, 2012
+ version 1.2.8, April 28th, 2013
- Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler
+ Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.6"
-#define ZLIB_VERNUM 0x1260
+#define ZLIB_VERSION "1.2.8"
+#define ZLIB_VERNUM 0x1280
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 6
+#define ZLIB_VER_REVISION 8
#define ZLIB_VER_SUBREVISION 0
/*
error. However if all decompression is to be performed in a single step (a
single call of inflate), the parameter flush should be set to Z_FINISH. In
this case all pending input is processed and all pending output is flushed;
- avail_out must be large enough to hold all the uncompressed data. (The size
- of the uncompressed data may have been saved by the compressor for this
- purpose.) The next operation on this stream must be inflateEnd to deallocate
- the decompression state. The use of Z_FINISH is not required to perform an
- inflation in one step. However it may be used to inform inflate that a
- faster approach can be used for the single inflate() call. Z_FINISH also
- informs inflate to not maintain a sliding window if the stream completes,
- which reduces inflate's memory footprint.
+ avail_out must be large enough to hold all of the uncompressed data for the
+ operation to complete. (The size of the uncompressed data may have been
+ saved by the compressor for this purpose.) The use of Z_FINISH is not
+ required to perform an inflation in one step. However it may be used to
+ inform inflate that a faster approach can be used for the single inflate()
+ call. Z_FINISH also informs inflate to not maintain a sliding window if the
+ stream completes, which reduces inflate's memory footprint. If the stream
+ does not complete, either because not all of the stream is provided or not
+ enough output space is provided, then a sliding window will be allocated and
+ inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+ been used.
In this implementation, inflate() always flushes as much output as
possible to the output buffer, and always uses the faster approach on the
inflate().
*/
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+ Bytef *dictionary,
+ uInt *dictLength));
+/*
+ Returns the sliding dictionary being maintained by inflate. dictLength is
+ set to the number of bytes in the dictionary, and that many bytes are copied
+ to dictionary. dictionary must have enough space, where 32768 bytes is
+ always enough. If inflateGetDictionary() is called with dictionary equal to
+ Z_NULL, then only the dictionary length is returned, and nothing is copied.
+ Similary, if dictLength is Z_NULL, then it is not set.
+
+ inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+ stream state is inconsistent.
+*/
+
ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
/*
Skips invalid compressed data until a possible full flush point (see above
available input is skipped. No output is provided.
inflateSync searches for a 00 00 FF FF pattern in the compressed data.
- All full flush points have this pattern, but not all occurences of this
+ All full flush points have this pattern, but not all occurrences of this
pattern are full flush points.
inflateSync returns Z_OK if a possible full flush point has been found,
the version of the header file.
*/
-typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
+typedef unsigned (*in_func) OF((void FAR *,
+ z_const unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
out_func out, void FAR *out_desc));
/*
inflateBack() does a raw inflate with a single call using a call-back
- interface for input and output. This is more efficient than inflate() for
- file i/o applications in that it avoids copying between the output and the
- sliding window by simply making the window itself the output buffer. This
- function trusts the application to not change the output buffer passed by
- the output function, at least until inflateBack() returns.
+ interface for input and output. This is potentially more efficient than
+ inflate() for file i/o applications, in that it avoids copying between the
+ output and the sliding window by simply making the window itself the output
+ buffer. inflate() can be faster on modern CPUs when used with large
+ buffers. inflateBack() trusts the application to not change the output
+ buffer passed by the output function, at least until inflateBack() returns.
inflateBackInit() must be called first to allocate the internal state
and to initialize the state with the user-provided window buffer.
"a" can be used instead of "w" to request that the gzip stream that will
be written be appended to the file. "+" will result in an error, since
- reading and writing to the same gzip file is not supported.
+ reading and writing to the same gzip file is not supported. The addition of
+ "x" when writing will create the file exclusively, which fails if the file
+ already exists. On systems that support it, the addition of "e" when
+ reading or writing will set the flag to close the file on an execve() call.
These functions, as well as gzip, will read and decode a sequence of gzip
streams in a file. The append function of gzopen() can be used to create
/*
Update a running CRC-32 with the bytes buf[0..len-1] and return the
updated CRC-32. If buf is Z_NULL, this function returns the required
- initial value for the for the crc. Pre- and post-conditioning (one's
- complement) is performed within this function so it shouldn't be done by the
- application.
+ initial value for the crc. Pre- and post-conditioning (one's complement) is
+ performed within this function so it shouldn't be done by the application.
Usage example:
unsigned char *next;
z_off64_t pos;
};
-ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
-#define gzgetc(g) \
- ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc_(g))
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
+#ifdef Z_PREFIX_SET
+# undef z_gzgetc
+# define z_gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#else
+# define gzgetc(g) \
+ ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#endif
/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
* change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
* functions are changed to 64 bits) -- in case these are set on systems
* without large file support, _LFS64_LARGEFILE must also be true
*/
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#ifdef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
#endif
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
# ifdef Z_PREFIX_SET
# define z_gzopen z_gzopen64
# define z_gzseek z_gzseek64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
# endif
-# ifndef _LARGEFILE64_SOURCE
+# ifndef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
/* undocumented functions */
ZEXTERN const char * ZEXPORT zError OF((int));
ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
-#ifndef Z_SOLO
- ZEXTERN unsigned long ZEXPORT gzflags OF((void));
+#if defined(_WIN32) && !defined(Z_SOLO)
+ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
+ const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+# ifndef Z_SOLO
+ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+ const char *format,
+ va_list va));
+# endif
#endif
#ifdef __cplusplus
projects / apitrace / blobdiff