[[!img notmuch-logo.png alt="Notmuch logo" class="left"]]
-# Tips and Tricks for using notmuch with Emacs
+# Tips and Tricks for using Notmuch with Emacs
-One of the more popular notmuch message reading clients is
-**notmuch.el**, an [emacs](http://www.gnu.org/software/emacs/) major
-mode for interacting with notmuch. It is included in the notmuch
-package (notmuch-emacs in Debian). This page goes over some usage
-tips for using notmuch with Emacs.
+Here are some tips and tricks for using Notmuch with Emacs. See the [[Notmuch
+Emacs Interface|notmuch-emacs]] page for basics.
[[!toc levels=2]]
-## Setup
-
-Have a look at the [Howto](http://notmuchmail.org/howto/) for
-prerequisites. Be sure you have done the general setup using the
-notmuch cli command!
-
-To use the Notmuch emacs mode, first add the following line to your
-`.emacs` rc file:
-
- (autoload 'notmuch "notmuch" "notmuch mail" t)
-
-or if you always want to load notmuch when you start emacs:
-
- (require 'notmuch)
-
-Then, either run "emacs -f notmuch", or execute the command `M-x
-notmuch` from within a running emacs.
-
-### <span id="notmuch_init_file"> Notmuch Emacs configuration file: </span>
-
-(Since Notmuch 0.18)
-
-After notmuch is loaded `notmuch-init-file` (typically
- `~/.emacs.d/notmuch-config.el`) is checked out. If such file exists
-it is loaded. Most emacs lisp based configuration not suitable via
-customization can be put there instead of `~/.emacs`.
-
-## Navigating & reading mails
-
-When first starting notmuch in emacs, you will be presented with the
-notmuch "hello" page. If it exits with an error after writing
-"Welcome to notmutch. You have" you need to do the basic notmuch setup
-first (see above).
-From here you can do searches, see lists of recent
-searches, saved searches, message tags, help information, etc.
-
-Executing a search will open a new buffer in `notmuch-search-mode`
-displaying the search results. Each line in the search results
-represents a message thread. Hitting the '?' key will show help for
-this mode.
-
-In general, the 'q' will kill the current notmuch buffer and return
-you to the previous buffer (sort of like a 'pop').
-
-In search mode, navigating to a thread and hitting return will then
-open a new buffer in `notmuch-show-mode`, which will show the actual
-message contents of the thread.
-
-## Sending mail
-
-In any notmuch mode, you can start a new message by hitting the 'm'
-key. To reply to a message or thread, just hit the 'r' key.
-
-When composing new messages, you will be entered in emacs's
-`message-mode`, which is a powerful mode for composing and sending
-messages. When in message mode, you can type `C-c ?` for help.
-
-If you would like to use address autocompletion when composing
-messages, see [address completion](#address_completion).
-
-When you are ready to send a message, type `C-c C-c`. By default
-message mode will use your sendmail command to send mail, so make sure
-that works. One annoying standard configuration of message mode is
-that it will hide the sent mail in your emacs frame stack, but it will
-not close it. If you type several mails in an emacs session they will
-accumulate and make switching between buffers more annoying. You can
-avoid that behavior by adding `(setq message-kill-buffer-on-exit t)`
-in your `.emacs` file
-(or doing `M-x customize-variable<RET>message-kill-buffer-on-exit<RET>`)
-which will really close the mail window after sending it.
-
-## Attaching files
-
-Using the `M-x mml-attach-file` command, you can attach any file to be
-sent with your mail. By default this command is bound to the menu item
-*Attachments--Attach File* with the key binding `C-c C-a`. The
-variable `mml-dnd-attach-options` (`M-x
-customize-variable<RET>mml-dnd-attach-options<RET>`) can be set to
-allow the prompting for various attachment options (such as
-inline/attachment) if you want to do that.
-
-For those who prefer a more graphical interface, you can also simply
-drag and drop files from a file manager into a mail composition window
-to have them attached. In Ubuntu this works without any modifications
-if files are dragged from the file manager.
-
-And for those who prefer working from command line, the following
-script opens new emacs window with empty message and attaches files
-mentioned as script arguments. (Note: The script expects that you have
-`(server-start)` in your `.emacs` file.)
-
- #!/bin/sh
- attach_cmds=""
- while [ $# -gt 0 ]; do
- fullpath=$(readlink --canonicalize "$1")
- attach_cmds="$attach_cmds (mml-attach-file \"$fullpath\")"
- shift
- done
- emacsclient -a '' -c -e "(progn (compose-mail) $attach_cmds)"
-
-## Controlling external handlers for attachements
+## Controlling external handlers for attachments
You can choose e.g. which pdf viewer to invoke from notmuch-show mode by
adding a .mailcap file in your home directory. Here is an example:
application/pdf; /usr/bin/mupdf %s; test=test "$DISPLAY" != ""; description=Portable Document Format; nametemplate=%s.pdf
application/x-pdf; /usr/bin/mupdf %s; test=test "$DISPLAY" != ""; description=Portable Document Format; nametemplate=%s.pdf
-## Issues with Emacs 24
-
-If notmuch-show-mode behaves badly for you in emacs 24.x try adding one of
-
- (setq gnus-inhibit-images nil)
-
-or
-
- (require 'gnus-art)
-
-to your .emacs file.
-
------
-
-# Advanced tips and tweaks
+### Convert ".pdf" and ".docx" to text and pop to buffer
+
+Add the following (hacky but effective!) code to `.emacs.d/notmuch-config.el`;
+the overwritten `defcustom` will change action when pressing RET on top of an
+attachment; ".pdf" and ".docx" attachments are converted to text (using
+"pdf2text" and "docx2txt.pl" commands to do the conversion), saving to file
+(the default action of `notmuch-show-part-button-default-action`) is offered
+to attachments of other types.
+
+ (defun user/mm-pipe-- (handle cmd)
+ ;; conveniently, '-' '-' a args to pdftotext and docx2txt.pl work fine
+ ;; fixme: naming inconsistency (fn name and buffer name)
+ (let ((buffer (get-buffer-create "*attachment-to-text*")))
+ (with-current-buffer buffer
+ (setq buffer-read-only nil)
+ (erase-buffer))
+ (with-temp-buffer
+ ;; "based on mm-pipe-part in mm-decode.el"
+ (mm-with-unibyte-buffer
+ (mm-insert-part handle)
+ (mm-add-meta-html-tag handle)
+ (let ((coding-system-for-write 'binary))
+ (call-process-region (point-min) (point-max)
+ cmd nil buffer nil "-" "-"))))
+ (pop-to-buffer buffer)
+ (goto-char (point-min))
+ (text-mode)
+ (visual-line-mode)
+ (view-mode)))
+
+ (defun user/notmuch-show-pop-attachment-to-buffer ()
+ ;; "based on notmuch-show-apply-to-current-part-handle"
+ (interactive)
+ (let ((handle (notmuch-show-current-part-handle)))
+ ;;(message "%s" handle)
+ (unwind-protect
+ (pcase (car (nth 1 handle))
+ ("application/pdf"
+ (user/mm-pipe-- handle "pdftotext"))
+ ("application/vnd.openxmlformats-officedocument.wordprocessingml.document"
+ (user/mm-pipe-- handle "docx2txt.pl"))
+ (_ (notmuch-show-save-part)))
+ (kill-buffer (mm-handle-buffer handle)))))
+
+ (setq notmuch-show-part-button-default-action
+ #'user/notmuch-show-pop-attachment-to-buffer)
+
+## Overwriting the sender address
+
+If you want to always use the same sender address, then the following
+defadvice can help you.
+
+ (defadvice notmuch-mua-reply (around notmuch-fix-sender)
+ (let ((sender "Max Monster <max.monster@example.com>"))
+ ad-do-it))
+ (ad-activate 'notmuch-mua-reply)
## Initial cursor position in notmuch 0.15 hello window
(define-key notmuch-search-mode-map "S"
(lambda (&optional beg end)
"mark thread as spam"
- (interactive (notmuch-search-interactive-region))
+ (interactive (notmuch-interactive-region))
(notmuch-search-tag (list "+spam" "-inbox") beg end)))
The analogous functionality in notmuch-tree is currently missing.
(define-key notmuch-show-mode-map "r" 'notmuch-show-reply)
(define-key notmuch-show-mode-map "R" 'notmuch-show-reply-sender)
-And in search mode:
+In search mode:
(define-key notmuch-search-mode-map "r" 'notmuch-search-reply-to-thread)
(define-key notmuch-search-mode-map "R" 'notmuch-search-reply-to-thread-sender)
+And in tree mode:
+
+ (define-key notmuch-tree-mode-map "r" (notmuch-tree-close-message-pane-and #'notmuch-show-reply))
+ (define-key notmuch-tree-mode-map "R" (notmuch-tree-close-message-pane-and #'notmuch-show-reply-sender))
## How to do FCC/BCC...
`notmuch-fcc-dirs` in the customization window for how to arrange
this.
+The `notmuch-fcc-dirs` variable is only taken into account when mails
+are composed using `notmuch-mua-mail`. If you want to use the notmuch
+mail user agent by default, the `mail-user-agent` needs to be
+customized to use the `notmuch-user-agent`.
+
## How to customize `notmuch-saved-searches`
When starting notmuch, a list of saved searches and message counts is
(setq notmuch-saved-searches '((:name "inbox"
:query "tag:inbox"
:count-query "tag:inbox and tag:unread"
- :sort-order 'oldest-first)))
+ :sort-order oldest-first)))
specifies a single saved search for inbox, but the number displayed by
the search will be the number of unread messages in the inbox, and the
an external browser. This can be done by `(notmuch-show-view-part)`, bound to
`. v` by default.
+This command will try to view the message part the point is on with an
+external viewer. The mime-type of the part will determine what viewer
+will be used. Typically a 'text/html' part will be send to your
+browser.
+
+The configuration for this is kept in so called `mailcap`
+files. (typically the file is `~/.mailcap` or `/etc/mailcap`) If the
+wrong viewer is started or something else goes wrong, there's a good
+chance something needs to be adapted in the mailcap configuration.
+
+For Example: The `copiousoutput` setting in mailcap files needs to be
+removed for some mime-types to prevent immediate removal of temporary
+files so the configured viewer can access them.
+
+
## msmtp, message mode and multiple accounts
As an alternative to running a mail server such as sendmail or postfix
for the domains you want to send out using specific SMTP servers and
the rest will go to the default account.
+## sending mail using smtpmail
+
+<!-- By default message mode will use the system `sendmail` command to send
+mail. However, on a typical desktop machine there may not be local SMTP
+daemon running (nor it is configured to send mail outside of the system). -->
+
+If setting up local `sendmail` or `msmtp` is not feasible or desirable,
+the Emacs `smtpmail` package can be used to send email by talking to remote
+SMTP server via TCP connection. It is pretty easy to configure:
+
+1. Emacs variable `message-send-mail-function` has not been set
+
+ Initially, Emacs variable `message-send-mail-function` has value of
+ `sendmail-query-once`. When (notmuch) message mode is about to send email,
+ `sendmail-query-once` will ask how emacs should send email. Typing `smtp`
+ will configure `smtpmail` and Emacs may prompt for SMTP settings.
+
+1. `M-x customize-group RET smtpmail`
+
+ As a minimum, 'Smtpmail Smtp Server' needs to be set.
+
+ After doing that, continue with `M-x load-library RET message` and
+ `M-x customize-variable RET message-send-mail-function`.
+ In the customization buffer select `message-smtpmail-send-it`.
+
+1. Set some variables in .emacs or in [notmuch init file](/notmuch-emacs#notmuch_init_file)
+
+ (setq smtpmail-smtp-server "smtp.server.tld" ;; <-- edit this !!!
+ ;; smtpmail-smtp-service 25 ;; 25 is default -- uncomment and edit if needed
+ ;; smtpmail-stream-type 'starttls
+ ;; smtpmail-debug-info t
+ ;; smtpmail-debug-verb t
+ message-send-mail-function 'message-smtpmail-send-it)
+
+Note that emacs 24 or newer is required for `smtpmail-stream-type`
+(and smtp authentication) to be effective.
+
+More information for smtpmail is available:
+
+* In Emacs: `M-x info-display-manual smtpmail`
+* [EmacsWiki Page](http://www.emacswiki.org/emacs/SendingMail)
+
+
## <span id="address_completion">Address completion when composing</span>
There are currently three solutions to this:
+### notmuch address
+
+Starting with Notmuch 0.21, there is a builtin command to perform
+autocompletion directly within Notmuch. Starting with 0.22, it is
+configured by default, so if you have previously configured another
+completion mechanism, you may want to try out the new internal
+method. Use `M-x customize-variable RET notmuch-address-command` and
+reset the value to "internal address completion" (`'internal` in
+lisp).
+
+If you are not yet running 0.22, you can still use it by adding a
+wrapper around the command called, say, `notmuch-address`:
+
+ #!/bin/sh
+ exec notmuch address from:"$*"
+
+Then you can set the `notmuch-address-command` to `notmuch-address`
+(if it is in your `$PATH` of course, otherwise use an absolute path).
+
### bbdb
[bbdb](http://bbdb.sourceforge.net) is a contact database for emacs
http://commonmeasure.org/~jkr/git/notmuch_addresses.git`) (slower, but
no compilation required so good for testing the setup)
+ * The C-based [notmuch-addrlookup](https://github.com/aperezdc/notmuch-addrlookup-c) by [Adrian Perez](http://perezdecastro.org/), which is faster but needs to be compiled.
+
+ git clone https://github.com/aperezdc/notmuch-addrlookup-c
+ cd notmuch-addrlookup-c
+ make
+
* The vala-based
- [addrlookup](http://github.com/spaetz/vala-notmuch) (faster, but
- needs compiling). The addrlookup binary needs to be compiled.
+ [addrlookup](http://github.com/spaetz/vala-notmuch) The addrlookup binary needs to be compiled.
Grab
`http://github.com/spaetz/vala-notmuch/raw/static-sources/src/addrlookup.c`
and build it with:
cc -o addrlookup addrlookup.c `pkg-config --cflags --libs gobject-2.0` -lnotmuch
* Shell/fgrep/perl combination [nottoomuch-addresses.sh](https://github.com/domo141/nottoomuch/blob/master/nottoomuch-addresses.rst).
- This tools maintains it's own address "database" gathered from email
+ This tools maintains its own address "database" gathered from email
files notmuch knows and search from that "database" is done by `fgrep(1)`.
* python/sqlite combination [notmuch-abook](https://github.com/guyzmo/notmuch-abook/)
from notmuch. It also includes a vim plugin.
You can perform tab-completion using any of these programs.
-Just add the following to your [notmuch init file](#notmuch_init_file):
+Just add the following to your [notmuch init file](/notmuch-emacs#notmuch_init_file):
(require 'notmuch-address)
(setq notmuch-address-command "/path/to/address_fetching_program")
You will find the akonadimailsearch binary in the build/src directory. Copy it to ~/bin .
You can now add the following settings to your
-[notmuch init file](#notmuch_init_file):
+[notmuch init file](/notmuch-emacs#notmuch_init_file):
(require 'notmuch-address)
(setq notmuch-address-command "~/bin/akonadimailsearch")
## How to sign/encrypt messages with gpg
-Messages can by signed using gpg by invoking
+Messages can be signed using gpg by invoking
`M-x mml-secure-sign-pgpmime` (or `M-x mml-secure-encrypt-pgpmime`).
These functions are available via the standard `message-mode` keybindings
-`C-c C-m s p` and `C-c C-m c p`. To sign outgoing mail by default, use the
-`message-setup-hook` in your `.emacs` file:
+`C-c C-m s p` and `C-c C-m c p`.
+
+In Emacs 28 you will be asked whether to sign the message using the
+sender and are offered to remember your choice. In Emacs 27 you will
+get a slightly misleading error and have to manually add the following
+line to you init file. Older Emacsen just do this unconditionally.
+
+ (setq mml-secure-openpgp-sign-with-sender t)
+
+To sign outgoing mail by default, use the `message-setup-hook` in your
+init file:
;; Sign messages by default.
(add-hook 'message-setup-hook 'mml-secure-sign-pgpmime)
of `mml-secure-sign-pgpmime` to sign the whole message instead of just one
part.
+If you want to automatically encrypt outgoing messages if the keyring
+contains a public key for every recipient, you can add something like
+that to your `.emacs` file:
+
+ (defun message-recipients ()
+ "Return a list of all recipients in the message, looking at TO, CC and BCC.
+
+ Each recipient is in the format of `mail-extract-address-components'."
+ (mapcan (lambda (header)
+ (let ((header-value (message-fetch-field header)))
+ (and
+ header-value
+ (mail-extract-address-components header-value t))))
+ '("To" "Cc" "Bcc")))
+
+ (defun message-all-epg-keys-available-p ()
+ "Return non-nil if the pgp keyring has a public key for each recipient."
+ (require 'epa)
+ (let ((context (epg-make-context epa-protocol)))
+ (catch 'break
+ (dolist (recipient (message-recipients))
+ (let ((recipient-email (cadr recipient)))
+ (when (and recipient-email (not (epg-list-keys context recipient-email)))
+ (throw 'break nil))))
+ t)))
+
+ (defun message-sign-encrypt-if-all-keys-available ()
+ "Add MML tag to encrypt message when there is a key for each recipient.
+
+ Consider adding this function to `message-send-hook' to
+ systematically send encrypted emails when possible."
+ (when (message-all-epg-keys-available-p)
+ (mml-secure-message-sign-encrypt)))
+
+ (add-hook 'message-send-hook #'message-sign-encrypt-if-all-keys-available
+
### Troubleshooting message-mode gpg support
- If you have trouble with expired subkeys, you may have encountered
installed, it will shadow the fixed version of easypg included with
emacs.
+- If you wish `mml-secure-encrypt` to encrypt also for the sender, then
+ `M-x customize-variable mml2015-encrypt-to-self` might suit your need.
+
## Reading and verifying encrypted and signed messages
Encrypted and signed mime messages can be read and verified with:
- (notmuch-crypto-process-mime t)
+ (setq notmuch-crypto-process-mime t)
-Decrypting or verifying inline pgp messages can be done by selecting
-an the inline pgp area and and using:
+Decrypting inline pgp messages can be done by selecting an the inline pgp area
+and using:
M-x epa-decrypt-region RET
+Verifying of inline pgp messages is not supported directly ([reasons
+here](https://dkg.fifthhorseman.net/notes/inline-pgp-harmful/)). You can still
+verify a part using
+
+ M-x notmuch-show-pipe-part RET gpg --verify RET
+
## Multiple identities using gnus-alias
[gnus-alias](http://www.emacswiki.org/emacs/GnusAlias) allows you to
;; Use "home" identity by default
(setq gnus-alias-default-identity "home")
;; Define rules to match work identity
- (setq gnus-alias-identity-rules)
- '(("work" ("any" "john.doe@\\(example\\.com\\|help\\.example.com\\)" both) "work"))
+ (setq gnus-alias-identity-rules
+ '(("work" ("any" "john.doe@\\(example\\.com\\|help\\.example.com\\)" both) "work")))
;; Determine identity when message-mode loads
(add-hook 'message-setup-hook 'gnus-alias-determine-identity)
See also the **Usage:** section in `gnus-alias.el`.
+## Multiple identities (and more) with message-templ
+
+Another option for multiple identities is
+[message-templ](http://git.tethera.net/message-templ.git)
+(also a available in marmalade). This provides roughly the same
+facilities as wanderlust's template facility.
+
+See
+[example.emacs.el](https://git.tethera.net/message-templ.git/tree/example.emacs.el)
+for some simple examples of usage.
+
## Resending (or bouncing) messages
-Add the following to your [notmuch init file](#notmuch_init_file) to be able
+Add the following to your [notmuch init file](/notmuch-emacs#notmuch_init_file) to be able
to resend the current message in show mode.
(define-key notmuch-show-mode-map "b"
## `notmuch-hello` refresh status message
-Add the following to your [notmuch init file](#notmuch_init_file) to get a
+Add the following to your [notmuch init file](/notmuch-emacs#notmuch_init_file) to get a
status message about the change in the number of messages in the mail store
when refreshing the `notmuch-hello` buffer.
Mailman mailing list software rewrites and rewraps long message subjects in
a way that causes TABs to appear in the middle of the subject and header
-lines. Add this to your [notmuch init file](#notmuch_init_file) to replace
+lines. Add this to your [notmuch init file](/notmuch-emacs#notmuch_init_file) to replace
tabs with spaces in subject lines:
(defun notmuch-show-subject-tabs-to-spaces ()
(add-hook 'notmuch-show-markup-headers-hook 'notmuch-show-subject-tabs-to-spaces)
-And in header lines (this will only work with the yet to be released
-notmuch version 0.15):
+And in header lines:
(defun notmuch-show-header-tabs-to-spaces ()
"Replace tabs with spaces in header line."
view a thread. This takes two steps:
1. Apply
-[this patch from Mark Walters](http://notmuchmail.org/pipermail/notmuch/2012/010817.html)
+[this patch from Mark Walters](https://notmuchmail.org/pipermail/notmuch/2012/010817.html)
to add the `notmuch-show-filter-thread` function.
1. Add the following hook to your emacs configuration:
(add-to-list 'load-path "/usr/share/org-mode/lisp")
+In NixOS, using `emacsWithPackages (epkgs: [ epkgs.orgPackages.org-plus-contrib ])`,
+
+ (loop for p in load-path
+ do (if (file-accessible-directory-p p)
+ (let ((m (directory-files-recursively p "^ol-notmuch.el$")))
+ (if m (add-to-list 'load-path (file-name-directory (car m)))))))
+
Then
- (require 'org-notmuch)
+ (require 'ol-notmuch)
In general it is nice to have a key for org-links (not just for notmuch). For example
- (define-key global-map "\C-cl" 'org-store-link)
+ (define-key global-map "\C-c l" 'org-store-link)
+
+If you're using `use-package` the package can be loaded using the following:
+
+```emacs-lisp
+(use-package ol-notmuch
+ :ensure t
+ :bind
+ ("C-c l" . org-store-link))
+```
+
+Note the package was renamed from `org-notmuch` to `ol-notmuch` in recent
+versions of org-mode. If you're using an old version of notmuch you might want
+to `(require 'org-notmuch)` instead.
## Viewing diffs in notmuch
"View the the current message as a patch."
(interactive)
(let* ((id (notmuch-show-get-message-id))
+ (msg (notmuch-show-get-message-properties))
+ (part (notmuch-show-get-part-properties))
(subject (concat "Subject: " (notmuch-show-get-subject) "\n"))
(diff-default-read-only t)
(buf (get-buffer-create (concat "*notmuch-patch-" id "*")))
(map (make-sparse-keymap)))
- (define-key map "q" 'notmuch-kill-this-buffer)
+ (define-key map "q" 'notmuch-bury-or-kill-this-buffer)
(switch-to-buffer buf)
(let ((inhibit-read-only t))
(erase-buffer)
(insert subject)
- (insert (notmuch-get-bodypart-internal id 1 nil)))
+ (insert (notmuch-get-bodypart-text msg part nil)))
(set-buffer-modified-p nil)
(diff-mode)
(lexical-let ((new-ro-bind (cons 'buffer-read-only map)))
(add-to-list 'minor-mode-overriding-map-alist new-ro-bind))
(goto-char (point-min))))
-and then this function needs to bound into the keymap with something like
+and then this function needs to bound to `. d` in the keymap
+
+ (define-key 'notmuch-show-part-map "d" 'my-notmuch-show-view-as-patch)
+
+## Interfacing with Patchwork
+
+[Patchwork](http://jk.ozlabs.org/projects/patchwork/) is a web-based system for
+tracking patches sent to a mailing list. While the Notmuch project doesn't use
+it, many other open source projects do. Having an easy way to get from a patch
+email in your favorite mail client to the web page of the patch in the Patchwork
+instance is a cool thing to have. Here's how to abuse the notmuch stash feature
+to achieve this. (Don't know stash? See `notmuch-show-stash-mlarchive-link`,
+bound to `c l` in `notmuch-show`.)
+
+The trick needed is turning the email Message-ID into a unique Patchwork ID
+assigned by Patchwork. We'll use the `pwclient` command-line tool to achieve
+this. You'll first need to get that working and configured for the Patchwork
+instance you're using. That part is beyond this tip here; please refer to
+Patchwork documentation.
+
+Check your configuration on the command-line, for example:
+
+ /path/to/pwclient -p <the-project> -n 5 -f "%{id}"
+
+Note that the -f format argument may require a reasonably new version of the
+client. Once you have the above working, you can `M-x customize-variable RET
+notmuch-show-stash-mlarchive-link-alist RET`.
+
+Add a new entry with "Function returning the URL:" set to:
+
+ (lambda (message-id)
+ (concat "http://patchwork.example.com/patch/"
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{id}"))))
+
+Replacing `http://patchwork.example.com/patch/`, `/path/to/pwclient`, and
+`the-project` appropriately. You should now be able to stash the Patchwork URL
+using `c l`.
- (define-key 'notmuch-show-mode-map "D" 'my-notmuch-show-view-as-patch)
+Going further, if the patch has been committed, you can get the commit hash with
+this:
+
+ (lambda (message-id)
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{commit_ref}")))
+
+And finally, if the project has a web interface to its source repository, you
+can turn the commit hash into a URL pointing there, for example:
+
+ (lambda (message-id)
+ (concat "http://cgit.example.com/the-project/commit/?id="
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{commit_ref}"))))
+
+## Never forget attachments
+
+Very often we forget to actually attach the file when we send an email
+that's supposed to have an attachment. Did this never happen to you?
+If not, then it will.
+
+Since version 0.29 Notmuch includes the `notmuch-mua-attachment-check`
+function. This function checks whether a message references an
+attachment and if it finds none it asks for confirmation before
+sending the message. The function is meant to be added to the
+`message-send-hook`, like so:
+
+ (add-hook 'message-send-hook 'notmuch-mua-attachment-check)
+
+The "customize"able variable `notmuch-mua-attachment-regexp` controls
+how reference to an attachment are identified. By default, it
+identifies English and French terms. For example, the following makes
+it recognise English and Portuguese terms:
+
+ (setq-default notmuch-mua-attachment-regexp
+ "\\b\\(attach\\|attachment\\|attached\\|anexo\\|anexado\\)\\b")
+
+
+## Avoid forgetting the subject
+
+It happens that we forget to enter the Subject line, particularly when
+we leave that to the end. It's easy to write a function that checks
+whether the Subject is empty, and add it to `message-send-hook` to get
+confirmation:
+
+ (defun my-notmuch-mua-empty-subject-check ()
+ "Request confirmation before sending a message with empty subject"
+ (when (and (null (message-field-value "Subject"))
+ (not (y-or-n-p "Subject is empty, send anyway? ")))
+ (error "Sending message cancelled: empty subject.")))
+ (add-hook 'message-send-hook 'my-notmuch-mua-empty-subject-check)
+
+
+## Applying patches to git repositories
+
+The `notmuch-extract-thread-patches` and
+`notmuch-extract-message-patches` commands from the `elpa-mailscripts`
+package in Debian (and its derivatives) can do this for you.
+
+## Allow content preference based on message context
+
+The preference for which sub-part of a multipart/alternative part is shown is
+globally set. For example, if you prefer showing the html version over the text
+based, you can set:
+
+ (setq notmuch-multipart/alternative-discouraged '("text/plain" "text/html"))
+
+However, sometimes you might want to adapt your preference depending on the
+context. You can override the default settings on a per-message basis by
+providing a function that has access to the message and which returns the
+discouraged type list. For example:
+
+ (defun my/determine-discouraged (msg)
+ (let* ((headers (plist-get msg :headers))
+ (from (or (plist-get headers :From) "")))
+ (cond
+ ((string-match "whatever@mail.address.com" from)
+ '("text/plain"))
+ (t
+ '("text/html" "multipart/related")))))
+
+ (setq notmuch-multipart/alternative-discouraged
+ 'my/determine-discouraged)
+
+This would discourage text/html and multipart/related generally, but discourage
+text/plain should the message be sent from whatever@mail.address.com.
+
+## See the recipient address instead of your address when listing sent messages
+
+If you like to see your sent messages in unthreaded view, by default you will
+see your address in the authors column, which is maybe not what you want. The
+following code allows for showing the recipients if your email address (an
+arbitrary address, whatever@mail.address.com in the example) is included in the
+From field.
+
+ (defun my/notmuch-unthreaded-show-recipient-if-sent (format-string result)
+ (let* ((headers (plist-get result :headers))
+ (to (plist-get headers :To))
+ (author (plist-get headers :From))
+ (face (if (plist-get result :match)
+ 'notmuch-tree-match-author-face
+ 'notmuch-tree-no-match-author-face)))
+ (propertize
+ (format format-string
+ (if (string-match "whatever@mail.address.com" author)
+ (concat "↦ " (notmuch-tree-clean-address to))
+ (notmuch-tree-clean-address to)
+ author))
+ 'face face)))
+
+ (setq notmuch-unthreaded-result-format
+ '(("date" . "%12s ")
+ (my/notmuch-unthreaded-show-recipient-if-sent . "%-20.20s")
+ ((("subject" . "%s"))
+ . " %-54s ")
+ ("tags" . "(%s)")))
+
+## Issues with Emacs 24 (unsupported since notmuch 0.31 (2020-09-05))
+
+If notmuch-show-mode behaves badly for you in emacs 24.x try adding one of
+
+ (setq gnus-inhibit-images nil)
+
+or
+
+ (require 'gnus-art)
+
+to your .emacs file.
projects / notmuch-wiki / blobdiff