<h2>SYNOPSIS</h2>
<pre>
- <b>notmuch</b> [<u>option</u> ...] <u>command</u> [<u>arg</u> ...]
+ <b>notmuch</b> <u>command</u> [<u>args</u> ...]
</pre>
<h2>DESCRIPTION</h2>
the most widely used at this time.
</pre>
-<h2>OPTIONS</h2>
-<pre>
- Supported global options for <b>notmuch</b> include
-
- <b>--help</b>
-
- Print a synopsis of available commands and exit.
-
- <b>--version</b>
-
- Print the installed version of notmuch, and exit.
-
- <b>--config=FILE</b>
-
- Specify the configuration file to use. This overrides any con-
- figuration file specified by ${NOTMUCH_CONFIG}.
-</pre>
-
<h2>COMMANDS</h2>
<h3> SETUP</h3>
<pre>
- The <b>notmuch</b> <b>setup</b> command is used to configure Notmuch for first use,
+ The <b>notmuch</b> <b>setup</b> command is used to configure Notmuch for first use,
(or to reconfigure it later).
- The setup command will prompt for your full name, your primary email
- address, any alternate email addresses you use, and the directory con-
+ The setup command will prompt for your full name, your primary email
+ address, any alternate email addresses you use, and the directory con-
taining your email archives. Your answers will be written to a configu-
- ration file in ${NOTMUCH_CONFIG} (if set) or ${HOME}/.notmuch-config .
+ ration file in ${NOTMUCH_CONFIG} (if set) or ${HOME}/.notmuch-config .
This configuration file will be created with descriptive comments, mak-
- ing it easy to edit by hand later to change the configuration. Or you
+ ing it easy to edit by hand later to change the configuration. Or you
can run <b>notmuch</b> <b>setup</b> again to change the configuration.
- The mail directory you specify can contain any number of sub-directo-
+ The mail directory you specify can contain any number of sub-directo-
ries and should primarily contain only files with individual email mes-
- sages (eg. maildir or mh archives are perfect). If there are other,
- non-email files (such as indexes maintained by other email programs)
+ sages (eg. maildir or mh archives are perfect). If there are other,
+ non-email files (such as indexes maintained by other email programs)
then notmuch will do its best to detect those and ignore them.
- Mail storage that uses mbox format, (where one mbox file contains many
- messages), will not work with notmuch. If that's how your mail is cur-
+ Mail storage that uses mbox format, (where one mbox file contains many
+ messages), will not work with notmuch. If that's how your mail is cur-
rently stored, it is recommended you first convert it to maildir format
with a utility such as mb2md before running <b>notmuch</b> <b>setup</b> <b>.</b>
- Invoking <b>notmuch</b> with no command argument will run <b>setup</b> if the setup
+ Invoking <b>notmuch</b> with no command argument will run <b>setup</b> if the setup
command has not previously been completed.
</pre>
<h3> OTHER COMMANDS</h3>
<pre>
- Several of the notmuch commands accept search terms with a common syn-
+ Several of the notmuch commands accept search terms with a common syn-
tax. See notmuch-search-terms(7) for more details on the supported syn-
tax.
- The <b>search</b>, <b>show</b> and <b>count</b> commands are used to query the email data-
- base.
+ The <b>search</b>, <b>show</b> and <b>count</b> commands are used to query the email
+ database.
- The <b>reply</b> command is useful for preparing a template for an email
+ The <b>reply</b> command is useful for preparing a template for an email
reply.
The <b>tag</b> command is the only command available for manipulating database
contents.
- The <b>dump</b> and <b>restore</b> commands can be used to create a textual dump of
+ The <b>dump</b> and <b>restore</b> commands can be used to create a textual dump of
email tags for backup purposes, and to restore from that dump.
- The <b>config</b> command can be used to get or set settings int the notmuch
+ The <b>config</b> command can be used to get or set settings int the notmuch
configuration file.
</pre>
of notmuch.
<b>NOTMUCH</b>_<b>CONFIG</b>
- Specifies the location of the notmuch configuration file. Not-
- much will use ${HOME}/.notmuch-config if this variable is not
+ Specifies the location of the notmuch configuration file. Not-
+ much will use ${HOME}/.notmuch-config if this variable is not
set.
-
- <b>NOTMUCH</b>_<b>TALLOC</b>_<b>REPORT</b>
- Location to write a talloc memory usage report. See <b>tal-</b>
- <b>loc</b>_<b>enable</b>_<b>leak</b>_<b>report</b>_<b>full</b> in <b>talloc</b>(3) for more information.
</pre>
<h2>SEE ALSO</h2>
The number of matching messages (or threads) is output to stdout.
- With no search terms, a count of all messages (or threads) in the data-
- base will be displayed.
+ With no search terms, a count of all messages (or threads) in the
+ database will be displayed.
See <a href='../notmuch-search-terms-7/'>notmuch-search-terms</a>(7) for details of the supported syntax for
<search-terms>.
Notmuch restore supports two plain text dump formats, both with one
message-id per line, followed by a list of tags.
- <b>sup</b>
-
- The <b>sup</b> dump file format is specifically chosen to be compati-
+ <b>sup</b> The <b>sup</b> dump file format is specifically chosen to be compati-
ble with the format of files produced by sup-dump. So if
you've previously been using sup for mail, then the <b>notmuch</b>
<b>restore</b> command provides you a way to import all of your tags
Tags are hex-encoded by replacing every byte not matching the
regex <b>[A-Za-z0-9@=.,</b>_<b>+-]</b> with <b>%nn</b> where nn is the two digit hex
encoding. The message ID is a valid Xapian query, quoted using
- Xapian boolean term quoting rules: if the ID contains white-
- space or a close paren or starts with a double quote, it must
- be enclosed in double quotes and double quotes inside the ID
- must be doubled. The astute reader will notice this is a spe-
- cial case of the batch input format for <a href='../notmuch-tag-1/'>notmuch-tag</a>(1); note
- th
at the single message-id query is mandatory for <a href='../notmuch-restore-1/'>notmuch-</a>
+ Xapian boolean term quoting rules: if the ID contains whites-
+ pace or a close paren or starts with a double quote, it must be
+ enclosed in double quotes and double quotes inside the ID must
+ be doubled. The astute reader will notice this is a special
+ case of the batch input format for <a href='../notmuch-tag-1/'>notmuch-tag</a>(1); note that
+ th
e single message-id query is mandatory for <a href='../notmuch-restore-1/'>notmuch-</a>
<a href='../notmuch-restore-1/'>restore</a>(1).
With no search terms, a dump of all messages in the database will
Decrypt any MIME encrypted parts found in the selected con-
tent (ie. "multipart/encrypted" parts). Status of the
decryption will be reported (currently only supported with
- --format=json and --format=sexp) and on successful decryp-
- tion the multipart/encrypted part will be replaced by the
- decrypted content.
-
- Decryption expects a functioning <b>gpg-agent</b>(1) to provide any
- needed credentials. Without one, the decryption will fail.
+ --format=json and --format=sexp) and the multipart/encrypted
+ part will be replaced by the decrypted content.
See <a href='../notmuch-search-terms-7/'>notmuch-search-terms</a>(7) for details of the supported syntax for
<search-terms>.
line specifying a message-id and a set of tags. For details of
the actual formats, see <a href='../notmuch-dump-1/'>notmuch-dump</a>(1).
- <b>sup</b>
-
- The <b>sup</b> dump file format is specifically chosen to be com-
+ <b>sup</b> The <b>sup</b> dump file format is specifically chosen to be com-
patible with the format of files produced by sup-dump. So
if you've previously been using sup for mail, then the <b>not-</b>
<b>much</b> <b>restore</b> command provides you a way to import all of
<b>batch-tag</b>
The <b>batch-tag</b> dump format is intended to more robust
- against malformed message-ids and tags containing white-
-
space or non-<b>ascii</b>(7) characters. See <a href='../notmuch-dump-1/'>notmuch-dump</a>(1) for
+ against malformed message-ids and tags containing whites-
+
pace or non-<b>ascii</b>(7) characters. See <a href='../notmuch-dump-1/'>notmuch-dump</a>(1) for
details on this format.
<b>notmuch</b> <b>restore</b> updates the maildir flags according to tag
<b>--sort=</b>(<b>newest-first</b>|<b>oldest-first</b>)
This option can be used to present results in either chronolog-
- ical order (<b>oldest-first</b>) or reverse chronological order (<b>new-</b>
- <b>est-first</b>).
+ ical order (<b>oldest-first</b>) or reverse chronological order
+ (<b>newest-first</b>).
Note: The thread order will be distinct between these two
options (beyond being simply reversed). When sorting by <b>old-</b>
-<h1>NOTMUCH-SEARCH-TERMS(7)Miscellaneous Information ManualNOTMUCH-SEARCH-TERMS(7)</h1>
+<h1>NOTMUCH-SEARCH-TERMS(7)</h1>
<h2>NAME</h2>
<pre>
<initial-timestamp>..<final-timestamp>
- Each timestamp is a number representing the number of seconds since
+ Each timestamp is a number representing the number of seconds since
1970-01-01 00:00:00 UTC.
- In addition to individual terms, multiple terms can be combined with
- Boolean operators ( <b>and</b>, <b>or</b>, <b>not</b> , etc.). Each term in the query will
- be implicitly connected by a logical AND if no explicit operator is
- provided, (except that terms with a common prefix will be implicitly
+ In addition to individual terms, multiple terms can be combined with
+ Boolean operators ( <b>and</b>, <b>or</b>, <b>not</b> , etc.). Each term in the query will
+ be implicitly connected by a logical AND if no explicit operator is
+ provided, (except that terms with a common prefix will be implicitly
combined with OR until we get Xapian defect #402 fixed).
- Parentheses can also be used to control the combination of the Boolean
- operators, but will have to be protected from interpretation by the
- shell, (such as by putting quotation marks around any parenthesized
+ Parentheses can also be used to control the combination of the Boolean
+ operators, but will have to be protected from interpretation by the
+ shell, (such as by putting quotation marks around any parenthesized
expression).
</pre>
<h2>DATE AND TIME SEARCH</h2>
<pre>
- notmuch understands a variety of standard and natural ways of express-
+ notmuch understands a variety of standard and natural ways of express-
ing dates and times, both in absolute terms ("2012-10-24") and in rela-
- tive terms ("yesterday"). Any number of relative terms can be combined
- ("1 hour 25 minutes") and an absolute date/time can be combined with
- relative terms to further adjust it. A non-exhaustive description of
+ tive terms ("yesterday"). Any number of relative terms can be combined
+ ("1 hour 25 minutes") and an absolute date/time can be combined with
+ relative terms to further adjust it. A non-exhaustive description of
the syntax supported for absolute and relative terms is given below.
<b>The</b> <b>range</b> <b>expression</b>
date:<since>..<until>
- The above expression restricts the results to only messages
+ The above expression restricts the results to only messages
from <since> to <until>, based on the Date: header.
<since> and <until> can describe imprecise times, such as "yes-
- terday". In this case, <since> is taken as the earliest time
- it could describe (the beginning of yesterday) and <until> is
- taken as the latest time it could describe (the end of yester-
+ terday". In this case, <since> is taken as the earliest time
+ it could describe (the beginning of yesterday) and <until> is
+ taken as the latest time it could describe (the end of yester-
day). Similarly, date:january..february matches from the begin-
ning of January to the end of February.
- Currently, we do not support spaces in range expressions. You
+ Currently, we do not support spaces in range expressions. You
can replace the spaces with '_', or (in most cases) '-', or (in
- some cases) leave the spaces out altogether. Examples in this
+ some cases) leave the spaces out altogether. Examples in this
man page use spaces for clarity.
Open-ended ranges are supported (since Xapian 1.2.1), i.e. it's
- possible to specify date:..<until> or date:<since>.. to not
- limit the start or end time, respectively. Pre-1.2.1 Xapian
- does not report an error on open ended ranges, but it does not
+ possible to specify date:..<until> or date:<since>.. to not
+ limit the start or end time, respectively. Pre-1.2.1 Xapian
+ does not report an error on open ended ranges, but it does not
work as expected either.
- Entering date:expr without ".." (for example date:yesterday)
- won't work, as it's not interpreted as a range expression at
- all. You can achieve the expected result by duplicating the
- expr both sides of ".." (for example date:yesterday..yester-
+ Entering date:expr without ".." (for example date:yesterday)
+ won't work, as it's not interpreted as a range expression at
+ all. You can achieve the expected result by duplicating the
+ expr both sides of ".." (for example date:yesterday..yester-
day).
<b>Relative</b> <b>date</b> <b>and</b> <b>time</b>
All refer to past, can be repeated and will be accumulated.
- Units can be abbreviated to any length, with the otherwise
+ Units can be abbreviated to any length, with the otherwise
ambiguous single m being m for minutes and M for months.
- Number can also be written out one, two, ..., ten, dozen, hun-
- dred. Additionally, the unit may be preceded by "last" or
+ Number can also be written out one, two, ..., ten, dozen, hun-
+ dred. Additionally, the unit may be preceded by "last" or
"this" (e.g., "last week" or "this month").
- When combined with absolute date and time, the relative date
- and time specification will be relative from the specified
+ When combined with absolute date and time, the relative date
+ and time specification will be relative from the specified
absolute date and time.
Examples: 5M2d, two weeks
<h2>SEE ALSO</h2>
<pre>
- <a href='../notmuch-1/'>notmuch</a>(1),
<a href='../notmuch-config-1/'>notmuch-config</a>(1), <a href='../notmuch-count-1/'>notmuch-count</a>(1), <a href='../notmuch-dump-1/'>notmuch-dump</a>(1), <a href='../notmuch-hooks-5/'>not-</a>
+ <a href='../notmuch-1/'>notmuch</a>(1),
<a href='../notmuch-config-1/'>notmuch-config</a>(1), <a href='../notmuch-count-1/'>notmuch-count</a>(1), <a href='../notmuch-dump-1/'>notmuch-dump</a>(1), <a href='../notmuch-hooks-5/'>not-</a>
<a href='../notmuch-hooks-5/'>much-hooks</a>(5), <a href='../notmuch-new-1/'>notmuch-new</a>(1), <a href='../notmuch-reply-1/'>notmuch-reply</a>(1), <a href='../notmuch-restore-1/'>notmuch-restore</a>(1),
<a href='../notmuch-search-1/'>notmuch-search</a>(1), <a href='../notmuch-show-1/'>notmuch-show</a>(1), <a href='../notmuch-tag-1/'>notmuch-tag</a>(1)
</pre>
<h2>SYNOPSIS</h2>
<pre>
- <b>notmuch</b> [<u>option</u> ...] <u>command</u> [<u>arg</u> ...]
+ <b>notmuch</b> <u>command</u> [<u>args</u> ...]
</pre>
<h2>DESCRIPTION</h2>
the most widely used at this time.
</pre>
-<h2>OPTIONS</h2>
-<pre>
- Supported global options for <b>notmuch</b> include
-
- <b>--help</b>
-
- Print a synopsis of available commands and exit.
-
- <b>--version</b>
-
- Print the installed version of notmuch, and exit.
-
- <b>--config=FILE</b>
-
- Specify the configuration file to use. This overrides any con-
- figuration file specified by ${NOTMUCH_CONFIG}.
-</pre>
-
<h2>COMMANDS</h2>
<h3> SETUP</h3>
<pre>
- The <b>notmuch</b> <b>setup</b> command is used to configure Notmuch for first use,
+ The <b>notmuch</b> <b>setup</b> command is used to configure Notmuch for first use,
(or to reconfigure it later).
- The setup command will prompt for your full name, your primary email
- address, any alternate email addresses you use, and the directory con-
+ The setup command will prompt for your full name, your primary email
+ address, any alternate email addresses you use, and the directory con-
taining your email archives. Your answers will be written to a configu-
- ration file in ${NOTMUCH_CONFIG} (if set) or ${HOME}/.notmuch-config .
+ ration file in ${NOTMUCH_CONFIG} (if set) or ${HOME}/.notmuch-config .
This configuration file will be created with descriptive comments, mak-
- ing it easy to edit by hand later to change the configuration. Or you
+ ing it easy to edit by hand later to change the configuration. Or you
can run <b>notmuch</b> <b>setup</b> again to change the configuration.
- The mail directory you specify can contain any number of sub-directo-
+ The mail directory you specify can contain any number of sub-directo-
ries and should primarily contain only files with individual email mes-
- sages (eg. maildir or mh archives are perfect). If there are other,
- non-email files (such as indexes maintained by other email programs)
+ sages (eg. maildir or mh archives are perfect). If there are other,
+ non-email files (such as indexes maintained by other email programs)
then notmuch will do its best to detect those and ignore them.
- Mail storage that uses mbox format, (where one mbox file contains many
- messages), will not work with notmuch. If that's how your mail is cur-
+ Mail storage that uses mbox format, (where one mbox file contains many
+ messages), will not work with notmuch. If that's how your mail is cur-
rently stored, it is recommended you first convert it to maildir format
with a utility such as mb2md before running <b>notmuch</b> <b>setup</b> <b>.</b>
- Invoking <b>notmuch</b> with no command argument will run <b>setup</b> if the setup
+ Invoking <b>notmuch</b> with no command argument will run <b>setup</b> if the setup
command has not previously been completed.
</pre>
<h3> OTHER COMMANDS</h3>
<pre>
- Several of the notmuch commands accept search terms with a common syn-
+ Several of the notmuch commands accept search terms with a common syn-
tax. See notmuch-search-terms(7) for more details on the supported syn-
tax.
- The <b>search</b>, <b>show</b> and <b>count</b> commands are used to query the email data-
- base.
+ The <b>search</b>, <b>show</b> and <b>count</b> commands are used to query the email
+ database.
- The <b>reply</b> command is useful for preparing a template for an email
+ The <b>reply</b> command is useful for preparing a template for an email
reply.
The <b>tag</b> command is the only command available for manipulating database
contents.
- The <b>dump</b> and <b>restore</b> commands can be used to create a textual dump of
+ The <b>dump</b> and <b>restore</b> commands can be used to create a textual dump of
email tags for backup purposes, and to restore from that dump.
- The <b>config</b> command can be used to get or set settings int the notmuch
+ The <b>config</b> command can be used to get or set settings int the notmuch
configuration file.
</pre>
of notmuch.
<b>NOTMUCH</b>_<b>CONFIG</b>
- Specifies the location of the notmuch configuration file. Not-
- much will use ${HOME}/.notmuch-config if this variable is not
+ Specifies the location of the notmuch configuration file. Not-
+ much will use ${HOME}/.notmuch-config if this variable is not
set.
-
- <b>NOTMUCH</b>_<b>TALLOC</b>_<b>REPORT</b>
- Location to write a talloc memory usage report. See <b>tal-</b>
- <b>loc</b>_<b>enable</b>_<b>leak</b>_<b>report</b>_<b>full</b> in <b>talloc</b>(3) for more information.
</pre>
<h2>SEE ALSO</h2>
Decrypt any MIME encrypted parts found in the selected content
(ie. "multipart/encrypted" parts). Status of the decryption
will be reported (currently only supported with --format=json
- and --format=sexp) and on successful decryption the multi-
- part/encrypted part will be replaced by the decrypted content.
-
- Decryption expects a functioning <b>gpg-agent</b>(1) to provide any
- needed credentials. Without one, the decryption will fail.
-
- Implies --verify.
+ and --format=sexp) and the multipart/encrypted part will be re-
+ placed by the decrypted content. Implies --verify.
<b>--exclude=(true|false)</b>
- Specify whether to omit threads only matching search.tag_ex-
- clude from the search results (the default) or not. In either
- case the excluded message will be marked with the exclude flag
- (except when output=mbox when there is nowhere to put the
+ Specify whether to omit threads only matching search.tag_ex-
+ clude from the search results (the default) or not. In either
+ case the excluded message will be marked with the exclude flag
+ (except when output=mbox when there is nowhere to put the
flag).
- If --entire-thread is specified then complete threads are re-
+ If --entire-thread is specified then complete threads are re-
turned regardless (with the excluded flag being set when appro-
- priate) but threads that only match in an excluded message are
+ priate) but threads that only match in an excluded message are
not returned when <b>--exclude=true.</b>
The default is <b>--exclude=true.</b>
<b>--body=(true|false)</b>
- If true (the default) <b>notmuch</b> <b>show</b> includes the bodies of the
- messages in the output; if false, bodies are omitted.
- <b>--body=false</b> is only implemented for the json and sexp formats
+ If true (the default) <b>notmuch</b> <b>show</b> includes the bodies of the
+ messages in the output; if false, bodies are omitted.
+ <b>--body=false</b> is only implemented for the json and sexp formats
and it is incompatible with <b>--part</b> ><b>&</b>gt; <b>0.</b>
- This is useful if the caller only needs the headers as body-
+ This is useful if the caller only needs the headers as body-
less output is much faster and substantially smaller.
- A common use of <b>notmuch</b> <b>show</b> is to display a single thread of email
+ A common use of <b>notmuch</b> <b>show</b> is to display a single thread of email
messages. For this, use a search term of "thread:<thread-id>" as can be
seen in the first column of output from the <b>notmuch</b> <b>search</b> command.
</pre>
<h2>SEE ALSO</h2>
<pre>
- <a href='../notmuch-1/'>notmuch</a>(1),
<a href='../notmuch-config-1/'>notmuch-config</a>(1), <a href='../notmuch-count-1/'>notmuch-count</a>(1), <a href='../notmuch-dump-1/'>notmuch-dump</a>(1), <a href='../notmuch-hooks-5/'>not-</a>
+ <a href='../notmuch-1/'>notmuch</a>(1),
<a href='../notmuch-config-1/'>notmuch-config</a>(1), <a href='../notmuch-count-1/'>notmuch-count</a>(1), <a href='../notmuch-dump-1/'>notmuch-dump</a>(1), <a href='../notmuch-hooks-5/'>not-</a>
<a href='../notmuch-hooks-5/'>much-hooks</a>(5), <a href='../notmuch-new-1/'>notmuch-new</a>(1), <a href='../notmuch-reply-1/'>notmuch-reply</a>(1), <a href='../notmuch-restore-1/'>notmuch-restore</a>(1),
<a href='../notmuch-search-1/'>notmuch-search</a>(1), <a href='../notmuch-search-terms-7/'>notmuch-search-terms</a>(7), <a href='../notmuch-tag-1/'>notmuch-tag</a>(1)
</pre>
[[!meta date="2013-01-24"]]
Notmuch 0.15.1 (2013-01-24)
-===========================
+=========================
Internal test framework changes
-------------------------------
-------------------------------
Adjust Emacs test watchdog mechanism to cope with `process-attributes`
-being unimplemented.
+being unimplimented.
projects / obsolete / notmuch-wiki / commitdiff