GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
+the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
The precise terms and conditions for copying, distribution and
modification follow.
-\f
+
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
-\f
+
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
-\f
+
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
-\f
+
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
-\f
+
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
- Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
+library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.
+2006-12-15 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS, configure.ac (AC_INIT):
+ Version 1.3.9 released.
+
+ * Makefile.am (MOSTLYCLEANFILES): Add _match.i.
+ * configure.ac (for an assembler syntax supported by this package):
+ Remove _match.i.
+
+ * bootstrap (gnulib_tool_options_extras): New var.
+ (gnulib_tool_options): Use it.
+ * bootstrap.conf (gnulib_tool_options_extras): Avoid getline and
+ rpmatch. gzip doesn't need them, since it doesn't ENABLE_NLS.
+
+2006-12-13 Bruno Haible <bruno@clisp.org>
+
+ * configure.ac: Use $CPPFLAGS everywhere $CPP is used, and use
+ $CPPFLAGS $CFLAGS everywhere $CC is used.
+ * lib/Makefile.am (match.$(OBJEXT)): Likewise.
+ * configure.ac: Test the exit code of the $CPP and $ASCPPPOST commands
+ separately.
+
+2006-12-11 Paul Eggert <eggert@cs.ucla.edu>
+
+ * configure.ac (ASCPPPOST): Simplify to use just 'sed'.
+ * lib/Makefile.am (match.$(OBJEXT)): Check for CPP failure.
+
+2006-12-11 Bruno Haible <bruno@clisp.org>
+
+ Cross-compilation support.
+ * configure.ac (ASCPP): Remove substituted variable.
+ (ASCPPPOST, ASCPPFLAGS): New substituted variables.
+ * lib/Makefile.am (ASCPP, LN_S): Remove unnecessary macro definitions.
+ (match.$(OBJEXT)): Use CPP, ASCPPFLAGS, ASCPPPOST instead of ASCPP.
+ * configure.ac: Add test for chown function.
+ * gzip.c (treat_file) [!HAVE_CHOWN]: Don't call chown.
+ * gzip.c: Include "timespec.h". This doesn't fix any bugs, but
+ it is clearer.
+
+2006-12-11 Paul Eggert <eggert@cs.ucla.edu>
+
+ The SSIZE_MAX fix didn't work on NSK, so fix it in a more-reliable
+ (albeit more-complicated) way. Problem reported by Matthew Woehlke.
+ * gzip.h (read_buffer): New decl.
+ * unlzw.c (unlzw): Use read_buffer rather than read.
+ * zip.c (file_read): Likewise.
+ * util.c (copy, fill_inbuf): Likewise.
+ (read_buffer, write_buffer): New functions.
+ (write_buf): Use write_buffer rather than write.
+
+ Undo the previous SSIZE_MAX-related change; it didn't work.
+ * gzip.c: Include <limits.h>.
+ * util.c: Likewise.
+ * gzip.h: Don't include <limits.h>.
+ (INBUFSIZ): Don't worry about SSIZE_MAX here.
+
+2006-12-08 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS, configure.ac (AC_INIT):
+ Version 1.3.8 released.
+
+ * gzexe.in (mktemp_status): New var, used to see whether
+ mktemp is a known command. Use this instead of confounding
+ mktemp's existence with its success.
+
+ * zdiff.in: Remove first line containing ":". This follows
+ up on the SEDCMD fix of 2006-12-01.
+ * zforce.in: Likewise.
+ * zgrep.in: Likewise.
+ * zless.in: Likewise.
+ * zmore.in: Likewise.
+ * znew.in: Likewise.
+
+ Fix problems in porting to NSK reported by Matthew Woehlke in
+ <http://lists.gnu.org/archive/html/bug-gzip/2006-12/msg00025.html> and
+ <http://lists.gnu.org/archive/html/bug-gzip/2006-12/msg00027.html>.
+ * gzip.h: Include <limits.h>, for SSIZE_MAX.
+ (INBUFSIZE): Don't make it any larger than SSIZE_MAX.
+ Problem reported by Matthew Woehlke in
+ <http://lists.gnu.org/archive/html/bug-gzip/2006-11/msg00013.html>.
+ * gzip.c: Don't include <limits.h>, as gzip.h now does this.
+ * util.c: Likewise.
+ * gzip.c (main): Set exiting_signal before installing signal handlers.
+ (install_signal_handlers): Don't set exiting_signal here. This
+ fixes a C99ism.
+ * zip.c: Include timespec.h, for time_stamp type.
+
+2006-12-08 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> (tiny change)
+
+ * gzexe.in: Work around FreeBSD shell trap bug.
+ * gzip.1: Fix typo.
+ * doc/gzip.texi: Likewise.
+
+2006-12-08 Paul Eggert <eggert@cs.ucla.edu>
+
+ * .cvsignore: Add .deps, gzexe, gzip, zdiff, zforce, zgrep,
+ zless, zmore, znew.
+ * doc/.cvsignore: Add Makefile.
+ * lib/.cvsignore: Add .deps, Makefile, alloca.h, config.h, fcntl.h,
+ stamp-h1, stdint.h, sys.
+
+ * configure.ac (for assembler): Set ASFLAGS_config to
+ -Wa,--noexecstack if this seems advisable on this platform.
+ Problem reported by Mike Frysinger in
+ <http://lists.gnu.org/archive/html/bug-gzip/2006-12/msg00018.html>.
+ * lib/Makefile.am (match.$(OBJEXT)): Use ASFLAGS_config.
+
+2006-12-07 Paul Eggert <eggert@cs.ucla.edu>
+
+ * Makefile.am (install-exec-hook): Fix bug when installing
+ symbolic links as aliases. Problem reported by Mike Frysinger.
+
+ * deflate.c (deflate_fast, deflate): Avoid core dump. Problem
+ originally reported by Jochen Friedrich and trivial patch supplied
+ by Anthony Towns; see <http://bugs.debian.org/184057>.
+
+2006-12-06 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS, configure.ac (AC_INIT):
+ Version 1.3.7 released.
+
+2006-12-06 Bruno Haible <bruno@clisp.org> (tiny change)
+ and Paul Eggert <eggert@cs.ucla.edu>
+
+ Fix build failure on case-insensitive file systems.
+ * configure.ac: Use match_.s instead of _match.s.
+ * Makefile.am (MOSTLYCLEANFILES): Likewise.
+ * lib/Makefile.am (match.$(OBJEXT)): Likewise.
+ (MOSTLYCLEANFILES): Likewise.
+
+2006-12-06 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS: Document the fixes below.
+ * configure.ac (AC_CHECK_FUNCS_ONCE): Add siginterrupt.
+ * gzip.c (lstat) [!defined(HAVE_LSTAT) && !defined(lstat)]: Remove.
+ (SA_NOCLDSTOP, sigprocmask, sigset_t) [!defined SA_NOCLDSTOP]:
+ New macros.
+ (siginterrupt) [!defined SA_NOCLDSTOP && ! HAVE_SIGINTERRUPT]:
+ New macro.
+ (HAVE_WORKING_O_NOFOLLOW): Define to 0 if not defined.
+ (caught_signals, exiting_signal, remove_ofname_fd): New vars.
+ (remove_ofname): Remove; all uses changed to remove_ofname_fd.
+ (same_file, name_too_long): Remove.
+ (install_signal_handlers): New function. It prefers sigaction,
+ which is more reliable in the presence of race conditions.
+ Catch SIGXCPU and SIGXFSZ, too.
+ (main): Use it instead of installing them by hand.
+ (treat_file): Check for read error when closing ifd.
+ (treat_file, create_outfile, remove_output_file):
+ Avoid race conditions with signals.
+ (create_outfile, check_ofname): Remove most of the gorp about
+ working around ENAMETOOLONG deficiencies. It's obsolete now, and
+ anyway it had race conditions. Just rely on O_EXCL and
+ ENAMETOOLONG. The worst that can happen is that a file name will
+ be silently truncated on an obsolete machine, but no data will be lost.
+ (open_and_stat): Use HAVE_WORKING_O_NOFOLLOW rather than O_NOFOLLOW
+ to work around some O_NOFOLLOW bugs. Otherwise, fall back on
+ lstat only if lstat is available, as symlinks don't exist otherwise.
+ (open_input_file): Use O_NONBLOCK and O_NOCTTY too, to avoid
+ hanging gzip on special files.
+ (abort_gzip_signal): If sigaction is not available, ignore
+ signals. If we get the exiting signal, exit with ERROR status
+ rather than raising a signal.
+ * tailor.h (NO_ST_INO): Remove; no longer used now that same_file
+ is gone.
+
+2006-12-05 Paul Eggert <eggert@cs.ucla.edu>
+
+ Port to Tandem NSK/OSS, which lacks fchdir. Problem reported by
+ Matthew Woehlke in
+ <http://lists.gnu.org/archive/html/bug-gzip/2006-11/msg00013.html>.
+ * bootstrap.conf (gnulib_modules): Remove openat, as it pulls in
+ fchdir.
+ * configure.ac: Check for fdopendir.
+ * gzip.c: Don't include openat.h; no longer needed.
+ (treat_dir) [!HAVE_FDOPENDIR]: Fall back on the old opendir method
+ since fdopendir is not available.
+
+2006-12-04 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS: Describe the following change briefly.
+ * bootstrap.conf (gnulib_modules): Remove stat-macros; no longer
+ needed.
+ * gzip.c: Don't include stat-macros.h; no longer needed.
+ (treat_file): Refuse to compress files that are setuid, or setgid,
+ as this can in theory lead to security holes. Also, refuse to
+ compress files with the sticky bit set, on general principle.
+ (copy_stat): Don't copy the setuid, setgid, or sticky bits,
+ as (given the above change) they'll always be zero here.
+ Invoke chmod before chown, to close a race condition.
+
+ * .cvsignore: Add *.doc, build-aux.
+ * doc/.cvignore: New file.
+ * lib/.cvsignore: New file.
+ * m4/.cvsignore: New file.
+
+2006-12-01 Paul Eggert <eggert@cs.ucla.edu>
+
+ * doc/gzip.texi (Overview): Mention limits of gzip format's
+ time stamps. Also, gzip doesn't always preserve time stamps.
+
+ * gzip.c (abort_gzip_signal): Don't call abort () as a "safeguard",
+ since it actually causes a core dump. Problem reported by
+ Jakub Bogusz.
+
+ * NEWS: Describe gzexe changes noted below.
+ * Makefile.am (.in): Don't bother with SEDCMD. This stuff isn't needed
+ any more (the hosts it caters to are long extinct), and was
+ questionable anyway since the code assumes the skip= line was line 2.
+ * configure.ac (AC_SYS_INTERPRETER, SEDCMD): Remove; no longer needed.
+
+ * gzexe.in: Sweep the code and fix some bugs.
+ My, what sharp teeth you have, gzexe!
+ The straw that broke this camel's back was Matthew Burgess's bug report
+ <http://lists.gnu.org/archive/html/bug-gzip/2006-11/msg00012.html>.
+
+ (IFS): Set it to the standard value, both here and in the
+ script gzexe generates.
+ Check for missing operand after parsing options, not before.
+ This fixes the case for "cpexe --".
+ Check for tail -n problem separately in gzexe and in the executable
+ it generates, in case it's a different 'tail'.
+ (trap): Remove $tmp only if $tmp is not the empty string.
+ Preserve exit status.
+ Don't use the nonstandard (and rarely available) "cpmod" utility.
+ Don't use "set -C"; it's no longer useful and it breaks things
+ in some cases.
+ (main loop): Handle file names beginning with "-".
+ Exit with status of failing program, not with 1.
+ Fix some bugs in printing diagnostics, and in quoting.
+ Require the skip= line to have at least one digit.
+ Use test -u and test -g rather than using the (less-reliable) ls.
+ Refuse to compress more programs, e.g., sh.
+ Use mktemp rather than tempfile. Build a copy of
+ the compressed or uncompressed executable in the same
+ directory as the executable, as that's less likely to go wrong
+ if disk space is low. Have the executable exit with status 127,
+ not 1, if the decompression process fails; this is more compatible
+ with meta-programs like nohup. Have the executable
+ uncompress to a temp file with the same basename as the executable;
+ this is more likely to go right. Fix a race condition where the
+ executable temporarily did not exist (in either old or new forms).
+ Check for race conditions better when mv fails. Do not attempt
+ to use cp to do the real work, only to copy permissions to a temp
+ file, since we don't want to trash running executables.
+
+2006-11-26 Paul Eggert <eggert@cs.ucla.edu>
+
+ * inflate.c (inflate_dynamic, inflate): Don't send output to
+ stderr unless DEBUG is defined and 'verbose'. Problem reported by
+ Santiago Vila.
+
+ * zgrep.in: If the file name contains newline, &, \, or |, escape
+ the character so that 'sed' doesn't mishandle it as a replacement.
+ Problem reported by Bdale Garbee.
+
+2006-11-25 Paul Eggert <eggert@cs.ucla.edu>
+
+ * gzip.1 (OPTIONS): ouput -> output. Problem reported by Matt
+ Taggart.
+ * vms/gzip.hlp: Likewise.
+
+ * Makefile.am (FILES_TO_CHECK): New macro.
+ (check-local): Check only the files in FILES_TO_CHECK, since some
+ files under the working directory might be mutating as the test is
+ run, e.g., with "make check >log". Problem reported by Jim
+ Meyering.
+
+2006-11-20 Paul Eggert <eggert@cs.ucla.edu>
+
+ * NEWS, configure.ac (AC_INIT):
+ Version 1.3.6 released.
+
+ * NEWS: Describe 1.3.6's changes.
+ * NEWS, README, README-alpha, TODO: Change from GPL to FDL.
+ * .cvsignore, README-cvs, bootstrap, bootstrap.conf: New files.
+ * doc/Makefile.am, lib/Makefile.am: New files.
+ * THANKS: Change own email address to cs.ucla.edu. Add Sverre Jarp.
+ * TODO: Add new tasks to remove porting cruft and
+ all those buggy scripts.
+
+ * configure.ac: Renamed from configure.in.
+ (AC_PREREQ): Bump to 2.60.
+ (AC_INIT): Bump version to 1.3.6.
+ (AC_CONFIG_AUX_DIR): New.
+ (AC_CONFIG_HEADERS): Move config.h to lib.
+ Input is now lib/config.hin.
+ (AM_INIT_AUTOMAKE): Add gnits, dist-shar.
+ (AC_PROG_CC_STDC): New, replacing AC_PROG_CC.
+ (AM_PROG_CC_C_O, AC_PROG_RANLIB): New.
+ (AC_AIX, AC_GNU_SOURCE, AC_MINIX): Remove; gnulib does them now.
+ (gl_EARLY, gl_INIT): New.
+ match.c was moved to lib/match.c.
+ (AC_CHECK_HEADERS_ONCE): Replace AC_CHECK_HEADERS. Don't check
+ for sys/utime.h or utime.h.
+ (AC_CHECK_FUNCS_ONCE): Replace AC_CHECK_FUNCS. Check for fchmod
+ and fchown, not utime.
+ (AC_REPLACE_FUNCS): Remove; rpmatch is now done by gnulib.
+ (AC_CONFIG_FILES): Add doc/Makefile, lib/Makefile.
+
+ * bits.c: Use the more-usual form for copyright notices in source code.
+ * deflate.c: Likewise.
+ * gzip.c: Likewise.
+ * gzip.h: Likewise.
+ * inflate.c: Likewise.
+ * lzw.h: Likewise.
+ * revision.h: Likewise.
+ * tailor.h: Likewise.
+ * trees.c: Likewise.
+ * unpack.c: Likewise.
+ * unzip.c: Likewise.
+ * util.c: Likewise.
+ * crypt.c (dummy): Add decl so that pedantic compilers won't
+ complain about an empty file.
+ * gzip.c (license_msg): Use more-modern wording.
+ Include fcntl-safer.h, openat.h, stat-macros.h, stat-time.h.
+ Simply include <dirent.h> if !NO_DIR, removing a rats-nest of
+ #ifdefs.
+ Simply include <utimens.h> if !defined NO_UTIME, removing a
+ another rats-nest of #ifdefs.
+ (DIR_OPT, TIME_OPT): Remove.
+ (_D_EXACT_NAMLEN): Renamed from NAMLEN. All uses changed.
+ (S_ISDIR, S_ISREG, O_BINARY, O_CREAT, O_EXCL, S_IRUSR, S_IWUSR):
+ Remove; gnulib now does this.
+ (RETSIGTYPE): Remove; Autoconf does this.
+ (program_name): Renamed from progname, for compatibility with gnulib.
+ All uses changed.
+ (time_stamp): Now struct timespec, not time_t. All uses changd.
+ (remove_oftime): Now volatile.
+ (reset_times): Remove; now done by futimens.
+ (usage): Remove.
+ (try_help): New function.
+ (help, license): Don't output date as part of version.
+ A version number suffices.
+ (help): Redo help message to match style of coreutils etc.
+ (version): Don't bother printing compile-time configuration info
+ like STDC_HEADERS.
+ (main): Don't assume strlen (argv[0]) < INT_MAX (!).
+ On usage errors, suggest --help without outputting all the help.
+ (main, do_list): Remove unnecessary casts.
+ (treat_stdin, treat_file, get_method, copy_stat):
+ Support sub-second time stamp resolution.
+ (treat_file, copy_istat): Close some race conditions if files are
+ renamed as we read or write them.
+ (treat_file): Do not attempt to reset the access times of
+ directories that we read.
+ (open_and_stat, open_input_file): New functions.
+ (do_stat, get_istat): Remove; most of the contents went to these new
+ functions.
+ (make_ofname): Don't use WARN, as it affects exit status.
+ (get_method): When the original file name was truncated,
+ restore from its base name, not from its full name.
+ (do_list): Avoid undefined behavior with out-of-range time stamps.
+ ctime, for example, cannot be invoked on arbitrary time stamps safely,
+ since it might overrun an internal buffer. Do not assume that
+ localtime succeeds.
+ (copy_stat): Do not remove input file; that's now the caller's
+ responsibility. This avoids a problem if there is a write error
+ when the caller closes the output file.
+ (treat_dir): New arg FD, to avoid a race condition. All uses changed.
+ (remove_output_file): New function.
+ (abort_gzip): Use it.
+ (abort_gzip_signal): New function, which is async-signal-safe.
+ Exit with the signal that we got.
+ * gzip.h (program_name, time_stamp, abort_gzip): Adjust decls to
+ match gzip.c changes.
+ * inflate.c (huft_build): Return 2 if null input.
+ * tailor.h (HAVE_UTIME): Do not define; gnulib does this now.
+ (OPEN): Use open_safer, not plain open.
+ * unlzh.c (NPT): Set to 1<<TBIT, not to the maximum of NT and NP.
+ (make_table): Report an error if 1<<tablebits < nextcode.
+ (read_pt_len): Report an error if 16 < c.
+ * unpack.c (read_tree): Report an error if the tree has too many
+ leaves while reading it. Fix off-by-one error in final check.
+ * util.c: Include <xalloc.h>, for xalloc_die decl.
+ (gzip_base_name): Renamed from base_name, so we don't collide
+ with gnulib. All uses changed.
+ (add_envopt): Use xstrdup instead of xmalloc+strcpy.
+ Use xcalloc rather than calloc + check.
+ (gzip_error): Renamed from error, so we don't collide with gnulib.
+ All uses changed.
+ (xalloc_die): New function.
+ (xmalloc): Remove; no longer needed.
+ * zip.c (zip): Watch for time stamp overflow; the old code
+ mishandled negative time stamps.
+
+ * gzexe.in: Add support for --help, --version, --.
+ Don't call basename or sed if we can avoid it.
+ * zdiff.in: Likewise.
+ * zforce.in: Likewise.
+ * zgrep.in: Likewise.
+ * zless.in: Likewise.
+ * zmore.in: Likewise.
+ * znew.in: Likewise.
+ * zdiff.in: Protect against file names beginning with "-".
+ * zmore.in: Likewise.
+ * zgrep.in: Use printf rather than echo, to avoid problems with
+ leading "-" and backslash. Return status of subsidiary grep.
+ * zless.in: Add copyright notice.
+
+ * zless.1: We now pass "--" to LESSOPEN.
+ (BUGS): Mention that input file arguments are required.
+ Add copyright notice.
+
+ * COPYING: Update to current version.
+
+ * Makefile.am (SUBDIRS): New macro.
+ (AUTOMAKE_OPTIONS): Remove; now done in configure.ac.
+ (M4DIR, ACINCLUDE_INPUTS): Remove.
+ (EXTRA_DIST): Remove getopt.h.
+ (gzip_SOURCES): Remove getopt.c, getopt1.c, yesno.c.
+ (gzip_LDADD): Change from @LIBOBJS@ to lib/libgzip.a.
+ (AM_MAKEINFOFLAGS, info_TEXINFOS, gzip_TEXINFOS, ASCPP, LN_S):
+ (match.$(OBJEXT)): Move to subdirectory makefiles.
+ (.in): Substitute @VERSION@, too.
+ (check-local): New rule.
+ (MOSTLYCLEANFILES): Add _match.S.
+
+ * doc/gzip.texi: Renamed from gzip.texi. Change to GNU FDL
+ without invariant sections or cover texts. Don't put
+ version number or date into sample gzip -h output.
+ * lib/match.c: Renamed from match.c. Add ia64 version
+ written by Sverre Jarp (HP Labs).
+
+ * INSTALL: Remove from CVS; now created automatically by
+ the bootstrap script.
+ * Makefile.in: Likewise.
+ * aclocal.m4: Likewise.
+ * config.h.in: Likewise.
+ * configure: Likewise.
+ * depcomp: Likewise.
+ * fdl.texi: Likewise.
+ * getopt.c: Likewise.
+ * getopt.h: Likewise.
+ * getopt1.c: Likewise.
+ * gzip.doc: Likewise.
+ * gzip.info: Likewise.
+ * install-sh: Likewise.
+ * mdate-sh: Likewise.
+ * missing: Likewise.
+ * mkinstalldirs: Likewise.
+ * rpmatch.c: Likewise.
+ * stamp-vti: Likewise.
+ * texinfo.tex: Likewise.
+ * version.texi: Likewise.
+ * yesno.c: Likewise.
+
2002-09-30 Paul Eggert <eggert@twinsun.com>
* NEWS, README, revision.h, configure.in (AM_INIT_AUTOMAKE):
* match.c: Accept __i386 and __i386__ as synonyms for i386.
Bug reported by "fork __" <bouloumag@hotmail.com>.
-
+
2002-09-29 Paul Eggert <eggert@twinsun.com>
* gzip.texi (Overview): Suggest how to use gunzip on zip files.
names longer than 14 bytes. Rely on "mv"'s error-reporting.
This fixes a portability bug reported by Ralf Neubauer, along
with some other bugs.
-
+
Remove dangling output symlinks properly.
Bug reported by Kalle Olavi Niemitalo.
* gzip.c (lstat): New macro, for platforms lacking lstat.
Check against compressing "tail".
Check against "skip=" line with no integer.
* zgrep.in: Exit with status 2 if trouble, for consistency with grep.
-
+
* gzip.c (main): Avoid core dump in diagnostic message if
incorrect suffix is given.
* zdiff.in: Use "trap -" instead of "trap". Patch by Nicolas Boullis.
Use names, not numbers, for signals. Patch by Andrew Stribblehill.
-
+
* NEWS, README, revision.h, configure.in (AM_INIT_AUTOMAKE):
Revision 1.3.4, dated today.
* README-alpha: Now using latest stable GNU tools.
Using the latest tools allows gzip to build correctly on hosts
conforming to POSIX 1003.1-2001.
-
+
* configure.in (match): Use AC_LIBOBJ; Autoconf 2.53 requires it.
(LIBOBJS): No longer need to subst, since AC_LIBOBJ does it.
(AC_PREREQ): Bump to 2.53.
* gzip.c (license_msg): Update copyright.
(z_len): Now of type size_t.
-
+
2001-11-03 Paul Eggert <eggert@twinsun.com>
* NEWS, README, revision.h, gzip.texi, configure.in (AM_INIT_AUTOMAKE):
* gzip.texi, gzip.1: Add pointers to RFCs 1951 and 1952.
Mention that gzip --list reports file sizes modulo 2^32.
* gzip.1: Remove incorrect report of 2 GB bug. Add copyright notice.
-
+
2001-09-30 Paul Eggert <eggert@twinsun.com>
* NEWS, README, revision.h, gzip.texi, configure.in (AM_INIT_AUTOMAKE):
(get_method): "get newer version of gzip" -> "not supported"
(check_ofname): Use yesno instead of checking for 'y' ourselves.
(treat_file): Do not assume link count fits in int.
-
+
* gzip.h (yesno): New decl.
* util.c (display_ratio): Use floating point to compute ratio:
much tested, sorry.
-Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation,
-Inc.
-
-Copyright (C) 1992, 1993 Jean-loup Gailly
-
-This file is part of gzip (GNU zip).
+ -----
-gzip is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2006 Free
+ Software Foundation, Inc.
-gzip is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ Copyright (C) 1992, 1993 Jean-loup Gailly
-You should have received a copy of the GNU General Public License
-along with gzip; see the file COPYING. If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+ Copying and distribution of this file, with or without
+ modification, are permitted provided the copyright notice
+ and this notice are preserved.
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
Basic Installation
==================
- These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
- You can give `configure' initial values for variables by setting
-them in the environment. You can do that on the command line like this:
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
- *Note Environment Variables::, for more details.
+ *Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
- You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it cannot guess the host type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
where SYSTEM can have one of these forms:
- OS
- KERNEL-OS
+ OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the host
-platform (i.e., that on which the generated programs will eventually be
-run) with `--host=TYPE'. In this case, you should also specify the
-build platform with `--build=TYPE', because, in this case, it may not
-be possible to guess the build platform (it sometimes involves
-compiling and running simple test programs, and this can't be done if
-the compiler is a cross compiler).
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Environment Variables
-=====================
+Defining Variables
+==================
- Variables not defined in a site shell script can be set in the
-environment passed to configure. However, some packages may run
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
`configure' Invocation
======================
- `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
`--help'
`-h'
# Make gzip (GNU zip).
-## Copyright (C) 1999, 2001, 2002 Free Software Foundation
+# Copyright (C) 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2, or (at your option)
-## any later version.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-## 02111-1307, USA.
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-AUTOMAKE_OPTIONS = gnits dist-shar
+SUBDIRS = lib doc
ACLOCAL_AMFLAGS = -I m4
+AM_CPPFLAGS = -I$(top_srcdir)/lib
man_MANS = gunzip.1 gzexe.1 gzip.1 \
zcat.1 zcmp.1 zdiff.1 zforce.1 zgrep.1 zless.1 zmore.1 znew.1
-M4DIR = $(srcdir)/m4
-ACINCLUDE_INPUTS = $(M4DIR)/shell.m4
-
EXTRA_DIST = $(ACINCLUDE_INPUTS) $(man_MANS) \
algorithm.doc amiga/match.a amiga/Makefile.gcc amiga/Makefile.sasc \
- amiga/tailor.c amiga/utime.h atari/Makefile.st crypt.h getopt.h \
+ amiga/tailor.c amiga/utime.h atari/Makefile.st crypt.h \
gzexe.in gzip.doc gzip.h lzw.h msdos/match.asm msdos/tailor.c \
msdos/gzip.prj msdos/doturboc.bat msdos/Makefile.msc msdos/Makefile.bor \
msdos/Makefile.djg nt/Makefile.nt os2/gzip.def os2/Makefile.os2 \
bin_PROGRAMS = gzip
bin_SCRIPTS = gzexe zdiff zgrep zforce zless zmore znew
gzip_SOURCES = \
- bits.c crypt.c deflate.c getopt.c getopt1.c gzip.c inflate.c lzw.c \
- trees.c unlzh.c unlzw.c unpack.c unzip.c util.c yesno.c zip.c
-gzip_LDADD = @LIBOBJS@
-
-AM_MAKEINFOFLAGS = --no-split
-
-info_TEXINFOS = gzip.texi
-gzip_TEXINFOS = fdl.texi
-
-ASCPP = @ASCPP@
-LN_S = @LN_S@
-
-match.$(OBJEXT): match.c
- cp $(srcdir)/match.c _match.S
- $(ASCPP) _match.S >_match.s
- $(CC) -c $(CFLAGS) _match.s
- mv _match.$(OBJEXT) match.$(OBJEXT)
- rm -f _match.S _match.s
+ bits.c crypt.c deflate.c gzip.c inflate.c lzw.c \
+ trees.c unlzh.c unlzw.c unpack.c unzip.c util.c zip.c
+gzip_LDADD = lib/libgzip.a
gzip.doc: gzip.1
groff -man -Tascii $(srcdir)/gzip.1 | col -b | uniq >$@
SUFFIXES = .in
.in:
sed \
- -e '$(SEDCMD)' \
-e 's|/bin/sh|$(SHELL)|g' \
-e 's|BINDIR|$(bindir)|g' \
+ -e 's|[@]VERSION@|$(VERSION)|g' \
$(srcdir)/$@.in >$@
chmod a+x $@
+# A simple test, just of gzip -- more of a sanity check than anything else.
+FILES_TO_CHECK = $(bin_SCRIPTS) $(gzip_LDADD) \
+ $(top_srcdir)/ChangeLog $(top_srcdir)/configure $(top_srcdir)/gzip.c
+check-local: $(FILES_TO_CHECK)
+ for file in $(FILES_TO_CHECK); do \
+ ./gzip -cv -- "$$file" | ./gzip -d | cmp - "$$file" || exit; \
+ done
+ @echo 'Test succeeded.'
+
install-exec-hook: remove-installed-links
install-exec-hook remove-installed-links:
@for prog_ext in $(bin_PROGRAMS) $(bin_SCRIPTS); do \
transform='$(transform)'; \
test "X$$prog" = "X$$prog_ext" || \
transform="$$transform"';s/$$/$(EXEEXT)/'; \
- source=$(DESTDIR)$(bindir)/`echo "$$prog"|sed "$$transform"`; \
+ destbindir=$(DESTDIR)$(bindir); \
+ source=`echo "$$prog"|sed "$$transform"`; \
for alias in $$aliases; do \
- dest=$(DESTDIR)$(bindir)/`echo "$$alias"|sed "$$transform"`; \
+ dest=`echo "$$alias"|sed "$$transform"`; \
(set -x; \
+ cd "$$destbindir" && \
rm -f "$$dest" && \
case $@ in \
install-exec-hook) \
- for ln in ln "$(LN_S)"; do \
- $$ln "$$source" "$$dest" && break; \
- done;; \
+ ln "$$source" "$$dest" || $(LN_S) "$$source" "$$dest";; \
esac \
) || exit; \
done; \
MAINTAINERCLEANFILES = gzip.doc
-MOSTLYCLEANFILES = _match.s gzexe zdiff zforce zgrep zless zmore znew
+MOSTLYCLEANFILES = _match.i match_.s _match.S \
+ gzexe zdiff zforce zgrep zless zmore znew
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Make gzip (GNU zip).
+# Copyright (C) 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-SOURCES = $(gzip_SOURCES)
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
POST_UNINSTALL = :
bin_PROGRAMS = gzip$(EXEEXT)
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(gzip_TEXINFOS) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/config.h.in $(srcdir)/stamp-vti \
- $(srcdir)/version.texi $(top_srcdir)/configure AUTHORS COPYING \
- ChangeLog INSTALL NEWS README-alpha THANKS TODO depcomp \
- install-sh match.c mdate-sh missing mkinstalldirs rpmatch.c \
- texinfo.tex
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
+ ChangeLog INSTALL NEWS README-alpha THANKS TODO \
+ build-aux/compile build-aux/depcomp build-aux/install-sh \
+ build-aux/mdate-sh build-aux/missing build-aux/texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/shell.m4 \
- $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \
+ $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
+ $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-safer.m4 \
+ $(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/getopt.m4 \
+ $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/inline.m4 \
+ $(top_srcdir)/m4/shell.m4 $(top_srcdir)/m4/stat-time.m4 \
+ $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
+ $(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/unistd-safer.m4 \
+ $(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/utimbuf.m4 \
+ $(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes.m4 \
+ $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/yesno.m4 \
+ $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/config.h
CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
+ "$(DESTDIR)$(man1dir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS)
am_gzip_OBJECTS = bits.$(OBJEXT) crypt.$(OBJEXT) deflate.$(OBJEXT) \
- getopt.$(OBJEXT) getopt1.$(OBJEXT) gzip.$(OBJEXT) \
- inflate.$(OBJEXT) lzw.$(OBJEXT) trees.$(OBJEXT) \
+ gzip.$(OBJEXT) inflate.$(OBJEXT) lzw.$(OBJEXT) trees.$(OBJEXT) \
unlzh.$(OBJEXT) unlzw.$(OBJEXT) unpack.$(OBJEXT) \
- unzip.$(OBJEXT) util.$(OBJEXT) yesno.$(OBJEXT) zip.$(OBJEXT)
+ unzip.$(OBJEXT) util.$(OBJEXT) zip.$(OBJEXT)
gzip_OBJECTS = $(am_gzip_OBJECTS)
-gzip_DEPENDENCIES = @LIBOBJS@
+gzip_DEPENDENCIES = lib/libgzip.a
binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
SCRIPTS = $(bin_SCRIPTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+DEFAULT_INCLUDES = -I. -I$(top_builddir)/lib@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/match.Po $(DEPDIR)/rpmatch.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/bits.Po ./$(DEPDIR)/crypt.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/deflate.Po ./$(DEPDIR)/getopt.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/getopt1.Po ./$(DEPDIR)/gzip.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/inflate.Po ./$(DEPDIR)/lzw.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/trees.Po ./$(DEPDIR)/unlzh.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/unlzw.Po ./$(DEPDIR)/unpack.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/unzip.Po ./$(DEPDIR)/util.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/yesno.Po ./$(DEPDIR)/zip.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(gzip_SOURCES)
DIST_SOURCES = $(gzip_SOURCES)
-INFO_DEPS = $(srcdir)/gzip.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = gzip.dvi
-PDFS = gzip.pdf
-PSS = gzip.ps
-HTMLS = gzip.html
-TEXINFOS = gzip.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).shar.gz
+DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
+ABSOLUTE_FCNTL_H = @ABSOLUTE_FCNTL_H@
+ABSOLUTE_SYS_STAT_H = @ABSOLUTE_SYS_STAT_H@
ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
-ASCPP = @ASCPP@
+ASCPPFLAGS = @ASCPPFLAGS@
+ASCPPPOST = @ASCPPPOST@
+ASFLAGS_config = @ASFLAGS_config@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
+FCNTL_H = @FCNTL_H@
+GETOPT_H = @GETOPT_H@
+GREP = @GREP@
+HAVE__BOOL = @HAVE__BOOL@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
+LIBGZIP_LIBDEPS = @LIBGZIP_LIBDEPS@
+LIBGZIP_LTLIBDEPS = @LIBGZIP_LTLIBDEPS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
-SEDCMD = @SEDCMD@
+RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
+STDBOOL_H = @STDBOOL_H@
STRIP = @STRIP@
+SYS_STAT_H = @SYS_STAT_H@
+UNISTD_H = @UNISTD_H@
VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_STRIP = @ac_ct_STRIP@
ac_prefix_program = @ac_prefix_program@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
+builddir = @builddir@
datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
host_alias = @host_alias@
+htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-AUTOMAKE_OPTIONS = gnits dist-shar
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = lib doc
ACLOCAL_AMFLAGS = -I m4
+AM_CPPFLAGS = -I$(top_srcdir)/lib
man_MANS = gunzip.1 gzexe.1 gzip.1 \
zcat.1 zcmp.1 zdiff.1 zforce.1 zgrep.1 zless.1 zmore.1 znew.1
-M4DIR = $(srcdir)/m4
-ACINCLUDE_INPUTS = $(M4DIR)/shell.m4
EXTRA_DIST = $(ACINCLUDE_INPUTS) $(man_MANS) \
algorithm.doc amiga/match.a amiga/Makefile.gcc amiga/Makefile.sasc \
- amiga/tailor.c amiga/utime.h atari/Makefile.st crypt.h getopt.h \
+ amiga/tailor.c amiga/utime.h atari/Makefile.st crypt.h \
gzexe.in gzip.doc gzip.h lzw.h msdos/match.asm msdos/tailor.c \
msdos/gzip.prj msdos/doturboc.bat msdos/Makefile.msc msdos/Makefile.bor \
msdos/Makefile.djg nt/Makefile.nt os2/gzip.def os2/Makefile.os2 \
bin_SCRIPTS = gzexe zdiff zgrep zforce zless zmore znew
gzip_SOURCES = \
- bits.c crypt.c deflate.c getopt.c getopt1.c gzip.c inflate.c lzw.c \
- trees.c unlzh.c unlzw.c unpack.c unzip.c util.c yesno.c zip.c
+ bits.c crypt.c deflate.c gzip.c inflate.c lzw.c \
+ trees.c unlzh.c unlzw.c unpack.c unzip.c util.c zip.c
-gzip_LDADD = @LIBOBJS@
-AM_MAKEINFOFLAGS = --no-split
-info_TEXINFOS = gzip.texi
-gzip_TEXINFOS = fdl.texi
+gzip_LDADD = lib/libgzip.a
SUFFIXES = .in
+
+# A simple test, just of gzip -- more of a sanity check than anything else.
+FILES_TO_CHECK = $(bin_SCRIPTS) $(gzip_LDADD) \
+ $(top_srcdir)/ChangeLog $(top_srcdir)/configure $(top_srcdir)/gzip.c
+
MAINTAINERCLEANFILES = gzip.doc
-MOSTLYCLEANFILES = _match.s gzexe zdiff zforce zgrep zless zmore znew
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-am
+MOSTLYCLEANFILES = _match.i match_.s _match.S \
+ gzexe zdiff zforce zgrep zless zmore znew
+
+all: all-recursive
.SUFFIXES:
-.SUFFIXES: .in .c .dvi .html .info .o .obj .pdf .ps .texi
+.SUFFIXES: .in .c .o .obj
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
f=`echo "$$p" | \
sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
for opt in --help --version; do \
- if "$(DESTDIR)$(bindir)/$$f" $$opt > c$${pid}_.out 2> c$${pid}_.err \
+ if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
+ 2>c$${pid}_.err </dev/null \
&& test -n "`cat c$${pid}_.out`" \
&& test -z "`cat c$${pid}_.err`"; then :; \
else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
done; rm -f c$${pid}_.???; exit $$bad
gzip$(EXEEXT): $(gzip_OBJECTS) $(gzip_DEPENDENCIES)
@rm -f gzip$(EXEEXT)
- $(LINK) $(gzip_LDFLAGS) $(gzip_OBJECTS) $(gzip_LDADD) $(LIBS)
+ $(LINK) $(gzip_OBJECTS) $(gzip_LDADD) $(LIBS)
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
- test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
@list='$(bin_SCRIPTS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f $$d$$p; then \
esac; \
f=`echo "$$p" | sed 's,^.*/,,;$(transform)'`; \
for opt in --help --version; do \
- if "$(DESTDIR)$(bindir)/$$f" $$opt > c$${pid}_.out 2> c$${pid}_.err \
+ if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
+ 2>c$${pid}_.err </dev/null \
&& test -n "`cat c$${pid}_.out`" \
&& test -z "`cat c$${pid}_.err`"; then :; \
else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/match.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/rpmatch.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bits.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypt.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/deflate.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gzip.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inflate.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lzw.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unpack.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unzip.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yesno.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zip.Po@am__quote@
.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.texi.info:
- restore=: && \
- backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && cd $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then \
- mv $$f $$backupdir; \
- restore=mv; \
- fi; \
- done; \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
- then \
- rc=0; \
- cd $(srcdir); \
- else \
- rc=$$?; \
- cd $(srcdir) && \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; \
- exit $$rc
-
-.texi.dvi:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $<
-
-.texi.pdf:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $<
-
-.texi.html:
- $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<
- if test ! -d $@ && test -d $(@:.html=); then \
- mv $(@:.html=) $@; else :; fi
-$(srcdir)/gzip.info: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
-gzip.dvi: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
-gzip.pdf: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
-gzip.html: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
-$(srcdir)/version.texi: $(srcdir)/stamp-vti
-$(srcdir)/stamp-vti: gzip.texi $(top_srcdir)/configure
- @(dir=.; test -f ./gzip.texi || dir=$(srcdir); \
- set `$(SHELL) $(srcdir)/mdate-sh $$dir/gzip.texi`; \
- echo "@set UPDATED $$1 $$2 $$3"; \
- echo "@set UPDATED-MONTH $$2 $$3"; \
- echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp $(srcdir)/version.texi \
- || (echo "Updating $(srcdir)/version.texi"; \
- cp vti.tmp $(srcdir)/version.texi)
- -@rm -f vti.tmp
- @cp $(srcdir)/version.texi $@
-
-mostlyclean-vti:
- -rm -f vti.tmp
-
-maintainer-clean-vti:
- -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
-.dvi.ps:
- $(DVIPS) -o $@ $<
-
-uninstall-info-am:
- $(PRE_UNINSTALL)
- @if (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if cd "$(DESTDIR)$(infodir)"; then \
- echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- for file in $$d/$$base*; do \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f $(distdir)/$$relfile || \
- cp -p $$file $(distdir)/$$relfile; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf gzip.aux gzip.cp gzip.cps gzip.fn gzip.fns gzip.ky gzip.kys gzip.log \
- gzip.pg gzip.pgs gzip.tmp gzip.toc gzip.tp gzip.tps gzip.vr \
- gzip.vrs gzip.dvi gzip.pdf gzip.ps gzip.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
install-man1: $(man1_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
- test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
+ test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
done
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
mkid -fID $$unique
tags: TAGS
-TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$$tags $$unique; \
fi
ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
exit 1;; \
esac
$(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/$(M4DIR) $(distdir)/amiga $(distdir)/atari $(distdir)/m4 $(distdir)/msdos $(distdir)/nt $(distdir)/os2 $(distdir)/primos $(distdir)/primos/include $(distdir)/sample $(distdir)/vms
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
|| exit 1; \
fi; \
done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
- $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
- $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
+
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
$(am__remove_distdir)
dist dist-all: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
-installdirs:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ $(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-installcheck: installcheck-am
+installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
clean-generic:
distclean-generic:
- -rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
+clean: clean-recursive
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-distclean: distclean-am
+distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(DEPDIR) ./$(DEPDIR)
+ -rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-hdr distclean-tags
+ distclean-tags
-dvi: dvi-am
+dvi: dvi-recursive
-dvi-am: $(DVIS)
+dvi-am:
-html: html-am
+html: html-recursive
-html-am: $(HTMLS)
+info: info-recursive
-info: info-am
+info-am:
-info-am: $(INFO_DEPS)
+install-data-am: install-man
-install-data-am: install-info-am install-man
+install-dvi: install-dvi-recursive
install-exec-am: install-binPROGRAMS install-binSCRIPTS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-install-info: install-info-am
+install-html: install-html-recursive
+
+install-info: install-info-recursive
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
- echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
- $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
- else : ; fi; \
- done; \
- done
- @$(POST_INSTALL)
- @if (install-info --version && \
- install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
install-man: install-man1
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
installcheck-am: installcheck-binPROGRAMS installcheck-binSCRIPTS
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
- -rm -rf $(DEPDIR) ./$(DEPDIR)
+ -rm -rf ./$(DEPDIR)
-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti
+maintainer-clean-am: distclean-am maintainer-clean-generic
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
-mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
- mostlyclean-generic mostlyclean-vti
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
-pdf: pdf-am
+pdf: pdf-recursive
-pdf-am: $(PDFS)
+pdf-am:
-ps: ps-am
+ps: ps-recursive
-ps-am: $(PSS)
+ps-am:
uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
- uninstall-info-am uninstall-local uninstall-man
+ uninstall-local uninstall-man
uninstall-man: uninstall-man1
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
- clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
- dist-gzip dist-info dist-shar dist-tarZ dist-zip distcheck \
- distclean distclean-compile distclean-generic distclean-hdr \
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-exec-am install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am check-local clean \
+ clean-binPROGRAMS clean-generic ctags ctags-recursive dist \
+ dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
+ distcheck distclean distclean-compile distclean-generic \
distclean-tags distcleancheck distdir distuninstallcheck dvi \
dvi-am html html-am info info-am install install-am \
install-binPROGRAMS install-binSCRIPTS install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-man1 install-strip \
- installcheck installcheck-am installcheck-binPROGRAMS \
- installcheck-binSCRIPTS installdirs maintainer-clean \
- maintainer-clean-aminfo maintainer-clean-generic \
- maintainer-clean-vti mostlyclean mostlyclean-aminfo \
- mostlyclean-compile mostlyclean-generic mostlyclean-vti pdf \
- pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-info-am \
- uninstall-local uninstall-man uninstall-man1
-
-
-match.$(OBJEXT): match.c
- cp $(srcdir)/match.c _match.S
- $(ASCPP) _match.S >_match.s
- $(CC) -c $(CFLAGS) _match.s
- mv _match.$(OBJEXT) match.$(OBJEXT)
- rm -f _match.S _match.s
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-exec-hook install-html install-html-am \
+ install-info install-info-am install-man install-man1 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am \
+ installcheck-binPROGRAMS installcheck-binSCRIPTS installdirs \
+ installdirs-am maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-local \
+ uninstall-man uninstall-man1
+
gzip.doc: gzip.1
groff -man -Tascii $(srcdir)/gzip.1 | col -b | uniq >$@
.in:
sed \
- -e '$(SEDCMD)' \
-e 's|/bin/sh|$(SHELL)|g' \
-e 's|BINDIR|$(bindir)|g' \
+ -e 's|[@]VERSION@|$(VERSION)|g' \
$(srcdir)/$@.in >$@
chmod a+x $@
+check-local: $(FILES_TO_CHECK)
+ for file in $(FILES_TO_CHECK); do \
+ ./gzip -cv -- "$$file" | ./gzip -d | cmp - "$$file" || exit; \
+ done
+ @echo 'Test succeeded.'
install-exec-hook: remove-installed-links
install-exec-hook remove-installed-links:
transform='$(transform)'; \
test "X$$prog" = "X$$prog_ext" || \
transform="$$transform"';s/$$/$(EXEEXT)/'; \
- source=$(DESTDIR)$(bindir)/`echo "$$prog"|sed "$$transform"`; \
+ destbindir=$(DESTDIR)$(bindir); \
+ source=`echo "$$prog"|sed "$$transform"`; \
for alias in $$aliases; do \
- dest=$(DESTDIR)$(bindir)/`echo "$$alias"|sed "$$transform"`; \
+ dest=`echo "$$alias"|sed "$$transform"`; \
(set -x; \
+ cd "$$destbindir" && \
rm -f "$$dest" && \
case $@ in \
install-exec-hook) \
- for ln in ln "$(LN_S)"; do \
- $$ln "$$source" "$$dest" && break; \
- done;; \
+ ln "$$source" "$$dest" || $(LN_S) "$$source" "$$dest";; \
esac \
) || exit; \
done; \
-Current Version: 1.3.5.
-See the file ChangeLog for the details of all changes.
+Gzip 1.3.9 (2006-12-15)
+
+* No major changes; only porting fixes.
+
+Major changes in Gzip 1.3.8 (2006-12-08)
+
+* Fix some gzip problems:
+ - A security fix from Debian 1.3.5-5 was inadvertently omitted.
+ - The assembler is now invoked with --noexecstack if supported,
+ so that gzip can better resist stack-smashing attacks.
+
+Major changes in Gzip 1.3.7 (2006-12-06)
+
+* Fix some gzip problems:
+ - Refuse to compress setuid or setgid files, or files with the sticky bit.
+ - Fix more race conditions in setting file permissions and owner,
+ removing output files, following symbolic links, and dealing with
+ special files.
+ - Remove most of the code working around ENAMETOOLONG deficiencies.
+ Systems with those deficiencies are long-dead, and the workarounds
+ had race conditions on modern hosts.
+ - Catch CPU time and file size limit signals, too.
+ - Check for read errors when closing files.
+ - Fix a core dump caused by a stray abort mistakenly introduced in 1.3.6.
+* Fix some gzexe problems:
+ - Improve resistance to denial-of-service attacks.
+ - Fix some quoting and escaping bugs.
+ - Do not assume /tmp is sticky (though it should be!).
+ - Do not assume the working directory can be written.
+ - Rely on PATH in the generated executable, as the man page says.
+ - Don't assume IFS is sane.
+ - Exit with signal's status, if signaled.
+
+Major changes in Gzip 1.3.6 (2006-11-20)
+
+* Fix some race conditions in setting file time stamps, permissions, and owner.
+* Fix some race conditions in signal handling.
+* When gzip exits due to a signal, it exits with the signal's status, not 1.
+* gzip now restores file time stamps to the resolution supported by the
+ time-setting primitives of the operating system, typically 1 microsecond.
+ Formerly it restored them only to the nearest second.
+* gzip -r no longer attempts to reset the last-access times of directories
+ it reads, as this messes up when other processes are reading the directories.
+* The options --version and --help now work on all gzip-installed executables,
+ and now use a format similar to other GNU programs.
+* The manual is now distributed under the terms of the GNU Free
+ Documentation License without invariant sections or cover texts.
+* Port to current versions of Autoconf, Automake, and Gnulib.
Major changes from 1.3.4 to 1.3.5
* gzip now removes any output symlink before writing output file.
Major changes from 1.0.3 to 1.0.4.
* Added optimized asm version for 68020.
* Add support for DJGPP.
-
+
* Add support for the Atari ST.
* Added zforce to rename gzip'ed files with truncated names.
* Do not install with name uncompress (some systems rely on the
* Accept gzcat in addition to zcat for people having /usr/bin before
/usr/local/bin in their path.
-\f
-
-Copyright (C) 1999, 2001, 2002 Free Software Foundation, Inc.
-Copyright (C) 1992, 1993 Jean-loup Gailly
-
-This file is part of GNU tar.
-GNU tar is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+========================================================================
-GNU tar is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+Copyright (C) 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993 Jean-loup Gailly
-You should have received a copy of the GNU General Public License
-along with tar; see the file COPYING. If not, write to
-the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the ``GNU Free
+Documentation License'' file as part of this distribution.
-This is the file README for the gzip distribution, test version 1.3.5.
-
- Copyright (C) 1999, 2001, 2002 Free Software Foundation, Inc.
- Copyright (C) 1992, 1993 Jean-loup Gailly
-
- This file is part of gzip (GNU zip).
-
- gzip is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- gzip is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with tar; see the file COPYING. If not, write to
- the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
-
+This is the file README for the gzip distribution.
gzip (GNU zip) is a compression utility designed to be a replacement
for 'compress'. Its main advantages over compress are much better
authors of these two programs work closely together in the info-zip
team. zip and unzip are not associated with the GNU project.
See http://www.cdrom.com/pub/infozip/ for more about zip and unzip.
+
+
+========================================================================
+
+Copyright (C) 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993 Jean-loup Gailly
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the ``GNU Free
+Documentation License'' file as part of this distribution.
Please send comments and problem reports to <bug-gzip@gnu.org>.
- Copyright (C) 2001, 2002 Free Software Foundation, Inc.
-
- This file is part of GNU zip (gzip).
-
- gzip is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- gzip is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with gzip; see the file COPYING. If not, write to
- the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
+If you make changes to the source code, you may need recent
+versions of GNU build tools (notably Autoconf and Automake)
+to regenerate the intermediate files.
-If you make changes to the source code, you may need recent
-versions of GNU build tools to regenerate the intermediate files. The
-following versions were used to generate the intermediate files in
-this distribution:
+========================================================================
-* GNU Autoconf 2.54 <ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.54.tar.gz>
+Copyright (C) 2001, 2002, 2006 Free Software Foundation, Inc.
-* GNU Automake 1.7 <ftp://ftp.gnu.org/gnu/automake/automake-1.7.tar.gz>
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the ``GNU Free
+Documentation License'' file as part of this distribution.
Bo Nygaard Bai bai@iesd.auc.dk
Dave Barber dbarber@apocalypse.bbn.com
Rene Beaulieu reneb@distri.hydro.qc.ca
-Neal Becker neal@ctd.comsat.com
+Neal Becker neal@ctd.comsat.com
Dieter Becker becker@med-in.uni-sb.de
Nelson H. F. Beebe beebe@geronimo.math.utah.edu
Jeff Beadles jeff@onion.rain.com
Ron Cox roncox@indirect.com
Frank Crawford frank@photon.ansto.gov.au
James R. Crawford qralston@cislabs.pitt.edu
-Lawrence Crowl crowl@research.cs.orst.edu
+Lawrence Crowl crowl@research.cs.orst.edu
Klaus Dahlenburg kdburg@incoahe.hanse.de
William E Davidsen davidsen@ariel.crd.ge.com
John M. DeDourek dedourek@aixive2.cs.unb.ca
John Eaton jwe@che.utexas.edu
Will Edgington wedgingt@ptolemy.arc.nasa.gov
Brian Edmonds edmonds@edmonds.home.cs.ubc.ca
-Paul Eggert eggert@twinsun.com
+Paul Eggert eggert@cs.ucla.edu
Enami enami@sys.ptg.sony.co.jp
Kristoffer Eriksson ske@pkmab.se
Daniel Eriksson m91der@bellatrix.tdb.uu.se
Rik Faith faith@cs.unc.edu
-Larry Fahnoe fahnoe@c1mpls.mn.org
+Larry Fahnoe fahnoe@c1mpls.mn.org
Cristian Ferretti cfs@poincare.mat.puc.cl
Karl-Jose Filler pla_jfi@pki-nbg.philips.de
Valery Fine fine@vxcern.cern.ch
Arne H. Juul arnej@lise.unit.no
Dana Jacobsen jacobsd@solar.cor2.epa.gov
Peter Jannesen peter@ncs.nl
+Sverre Jarp
Brian D. Johnston johnstonb@med.ge.com
Walter W. Jones wwj@candela.cfr.nist.gov
Tom Judson judson@scf.usc.edu
Simon Leinen simon@lia.di.epfl.ch
Burt Leland burt@molecular.com
Tony Leneis tony@plaza.adp.ds.com
-Hugues Leroy hugues.leroy@irisa.fr
+Hugues Leroy hugues.leroy@irisa.fr
Marty Leisner leisner@eso.mc.xerox.com
Charles Levert charles@aramis.comm.polymtl.ca
Richard Levitte levitte@e.kth.se
Dean S. Messing deanm@medulla.labs.tek.com
M. Mesturino mesturino@cselt.stet.it
Luke Mewburn zak@rmit.edu.au
-Jim Meyering meyering@cs.utexas.edu
+Jim Meyering meyering@cs.utexas.edu
Dragan Milicic milicic@math.utah.edu
Frederic Miserey none.fred@applelink.apple.com
Marcel J.E. Mol marcel@duteca.et.tudelft.nl
Helge Oldach helge.oldach@stollmann.de
Arthur David Olson ado@elsie.nci.nih.gov
Piet van Oostrum piet@cs.ruu.nl
-Rafael R. Pappalardo rafapa@obelix.cica.es
+Rafael R. Pappalardo rafapa@obelix.cica.es
Mike Pearlman canuck@masc38.rice.edu
Yves Perrenoud pyves@nuga.alphanet.ch
Hal Peterson hrp@pecan.cray.com
Arjan de Vet devet@win.tue.nl
Larry W. Virden lvirden@cas.org
Vadim V. Vlasov vvlasov@inucres.msk.su
-Eduard Vopicka eduard.vopicka@vse.cs
+Eduard Vopicka eduard.vopicka@vse.cs
Theo Vosse vosse@ruls41.leidenuniv.nl
Darin Wayrynen darin@pcg.uucp
Marcel Waldvogel marcel@nice.usergroup.ethz.ch
Scott Weikart scott@igc.apc.org
Ivo Welch iwelch@agsm.ucla.edu
Jochen Wiedmann zrawi01@zmcipdec1.zdv.uni-tuebingen.de
-Gijsb. Wiesenekker wiesenecker@sara.nl
+Gijsb. Wiesenekker wiesenecker@sara.nl
Wietze van Winden wietze@swi.psy.uva.nl
Frank Wuebbeling wuebbel@math.uni-muenster.de
-Larry W. Virden lwv26@cas.org
+Larry W. Virden lwv26@cas.org
Bill Wohler wohler@sap-ag.de
Jamie Zawinski jwz@lucid.com
Christos Zoulas christos@deshaw.com
TODO file for gzip.
- Copyright (C) 1999, 2001 Free Software Foundation, Inc.
- Copyright (C) 1992, 1993 Jean-loup Gailly
-
- This file is part of gzip (GNU zip).
-
- gzip is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- gzip is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with tar; see the file COPYING. If not, write to
- the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA.
+Some of the planned features include:
+- Remove some of the old porting cruft, since we no longer support
+ PRIMOS etc. any more.
-Some of the planned features include:
+- Separate out the shell scripts like gzexe into a new little package;
+ these scripts are less used and less reliable and should be optional.
- Internationalize by using gettext and setlocale.
'compress' currently handles better than gzip.
- Implement the -e (encrypt) option.
-
+
Send comments to <bug-gzip@gnu.org>.
+
+
+========================================================================
+
+Copyright (C) 1999, 2001, 2006 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993 Jean-loup Gailly
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the ``GNU Free
+Documentation License'' file as part of this distribution.
-# generated automatically by aclocal 1.8.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# -*- Autoconf -*-
-# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
-# Generated from amversion.in; do not edit by hand.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.8.5])])
-
-# AM_AUX_DIR_EXPAND
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
am_aux_dir=`cd $ac_aux_dir && pwd`
])
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# AM_CONDITIONAL -*- Autoconf -*-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 6
+# serial 8
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.])
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
fi])])
-# serial 7 -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# serial 9
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
])
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# Generate code to set up dependency tracking. -*- Autoconf -*-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-#serial 2
+#serial 3
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
- grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
-# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 7
-
-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Do all the work for Automake. -*- Autoconf -*-
+# serial 12
-# This macro actually does too much some checks are only needed if
+# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# serial 11
-
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
fi
# test whether we have cygpath
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_MISSING_PROG(AMTAR, tar)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
AC_REQUIRE([AM_PROG_MKDIR_P])dnl
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_CC],
[_AM_DEPENDENCIES(CC)],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
])
done
echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
-# -*- Autoconf -*-
-# Copyright (C) 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 1
+# serial 2
# Check whether the underlying file-system supports filenames
# with a leading dot. For instance MS-DOS doesn't.
rmdir .tst 2>/dev/null
AC_SUBST([am__leading_dot])])
-# Check to see how 'make' treats includes. -*- Autoconf -*-
+# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 2
+# serial 3
# AM_MAKE_INCLUDE()
# -----------------
rm -f confinc confmf
])
-# -*- Autoconf -*-
-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# serial 5
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+dnl Make sure AC_PROG_CC is never called again, or it will override our
+dnl setting of CC.
+m4_define([AC_PROG_CC],
+ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
+])
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 5
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
fi
])
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
# AM_PROG_MKDIR_P
# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-
-# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # Keeping the `.' argument allows $(mkdir_p) to be used without
- # argument. Indeed, we sometimes output rules like
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined.
- # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
- # expensive solution, as it forces Make to start a sub-shell.)
- mkdir_p='mkdir -p -- .'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# Helper functions for option handling. -*- Autoconf -*-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 2
+# serial 3
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-#
-# Check to make sure that the build environment is sane.
-#
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 3
+# serial 4
# AM_SANITY_CHECK
# ---------------
fi
AC_MSG_RESULT(yes)])
-# AM_PROG_INSTALL_STRIP
-
-# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# AM_PROG_INSTALL_STRIP
+# ---------------------
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/absolute-header.m4])
+m4_include([m4/error.m4])
+m4_include([m4/exitfail.m4])
+m4_include([m4/extensions.m4])
+m4_include([m4/fcntl-safer.m4])
+m4_include([m4/fcntl_h.m4])
+m4_include([m4/getopt.m4])
+m4_include([m4/gnulib-comp.m4])
+m4_include([m4/inline.m4])
m4_include([m4/shell.m4])
+m4_include([m4/stat-time.m4])
+m4_include([m4/stdbool.m4])
+m4_include([m4/sys_stat_h.m4])
+m4_include([m4/timespec.m4])
+m4_include([m4/unistd-safer.m4])
+m4_include([m4/unistd_h.m4])
+m4_include([m4/utimbuf.m4])
+m4_include([m4/utimens.m4])
+m4_include([m4/utimes.m4])
+m4_include([m4/xalloc.m4])
+m4_include([m4/yesno.m4])
/* bits.c -- output variable-length bit strings
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1999 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
/*
#endif
#ifdef RCSID
-static char rcsid[] = "$Id: bits.c,v 0.9 1993/06/11 10:16:58 jloup Exp $";
+static char rcsid[] = "$Id: bits.c,v 1.4 2006/11/20 08:40:33 eggert Exp $";
#endif
/* ===========================================================================
bi_windup(); /* align on byte boundary */
if (header) {
- put_short((ush)len);
+ put_short((ush)len);
put_short((ush)~len);
#ifdef DEBUG
bits_sent += 2*16;
--- /dev/null
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no `-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # `.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2006-10-15.18
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-10-14.15
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ shift
+ shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
+ shift
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ || {
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ } || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+
+scriptversion=2005-06-29.22
+
+# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005 Free Software
+# Foundation, Inc.
+# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+ '')
+ echo "$0: No file. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification time of FILE.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "mdate-sh $scriptversion"
+ exit $?
+ ;;
+esac
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable. Since we cannot assume `unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+ TIME_STYLE=posix-long-iso
+ export TIME_STYLE
+fi
+
+save_arg1=$1
+
+# Find out how to get the extended ls output of a file or directory.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+ ls_command='ls -L -l -d'
+else
+ ls_command='ls -l -d'
+fi
+
+# A `ls -l' line looks as follows on OS/2.
+# drwxrwx--- 0 Aug 11 2001 foo
+# This differs from Unix, which adds ownership information.
+# drwxrwx--- 2 root root 4096 Aug 11 2001 foo
+#
+# To find the date, we split the line on spaces and iterate on words
+# until we find a month. This cannot work with files whose owner is a
+# user named `Jan', or `Feb', etc. However, it's unlikely that `/'
+# will be owned by a user whose name is a month. So we first look at
+# the extended ls output of the root directory to decide how many
+# words should be skipped to get the date.
+
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+set x`ls -l -d /`
+
+# Find which argument is the month.
+month=
+command=
+until test $month
+do
+ shift
+ # Add another shift to the command.
+ command="$command shift;"
+ case $1 in
+ Jan) month=January; nummonth=1;;
+ Feb) month=February; nummonth=2;;
+ Mar) month=March; nummonth=3;;
+ Apr) month=April; nummonth=4;;
+ May) month=May; nummonth=5;;
+ Jun) month=June; nummonth=6;;
+ Jul) month=July; nummonth=7;;
+ Aug) month=August; nummonth=8;;
+ Sep) month=September; nummonth=9;;
+ Oct) month=October; nummonth=10;;
+ Nov) month=November; nummonth=11;;
+ Dec) month=December; nummonth=12;;
+ esac
+done
+
+# Get the extended ls output of the file or directory.
+set dummy x`eval "$ls_command \"\$save_arg1\""`
+
+# Remove all preceding arguments
+eval $command
+
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
+ Jan) month=January; nummonth=1;;
+ Feb) month=February; nummonth=2;;
+ Mar) month=March; nummonth=3;;
+ Apr) month=April; nummonth=4;;
+ May) month=May; nummonth=5;;
+ Jun) month=June; nummonth=6;;
+ Jul) month=July; nummonth=7;;
+ Aug) month=August; nummonth=8;;
+ Sep) month=September; nummonth=9;;
+ Oct) month=October; nummonth=10;;
+ Nov) month=November; nummonth=11;;
+ Dec) month=December; nummonth=12;;
+esac
+
+case $3 in
+ ???*) day=$1;;
+ *) day=$3; shift;;
+esac
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+ *:*) set `date`; eval year=\$$#
+ case $2 in
+ Jan) nummonthtod=1;;
+ Feb) nummonthtod=2;;
+ Mar) nummonthtod=3;;
+ Apr) nummonthtod=4;;
+ May) nummonthtod=5;;
+ Jun) nummonthtod=6;;
+ Jul) nummonthtod=7;;
+ Aug) nummonthtod=8;;
+ Sep) nummonthtod=9;;
+ Oct) nummonthtod=10;;
+ Nov) nummonthtod=11;;
+ Dec) nummonthtod=12;;
+ esac
+ # For the first six month of the year the time notation can also
+ # be used for files modified in the last year.
+ if (expr $nummonth \> $nummonthtod) > /dev/null;
+ then
+ year=`expr $year - 1`
+ fi;;
+ *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+% texinfo.tex -- TeX macros to handle Texinfo files.
+%
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2006-12-05.11}
+%
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
+% Software Foundation, Inc.
+%
+% This texinfo.tex file is free software; you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation; either version 2, or (at
+% your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this texinfo.tex file; see the file COPYING. If not, write
+% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+% Boston, MA 02110-1301, USA.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. (This has been our intent since Texinfo was invented.)
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
+% ftp://tug.org/tex/texinfo.tex
+% (and all CTAN mirrors, see http://www.ctan.org).
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org. Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem. Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution. For a simple
+% manual foo.texi, however, you can get away with this:
+% tex foo.texi
+% texindex foo.??
+% tex foo.texi
+% tex foo.texi
+% dvips foo.dvi -o # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent. You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+ \catcode`+=\active \catcode`\_=\active}
+
+\message{Basics,}
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
+\let\ptext=\t
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+ \let\linenumber = \empty % Pre-3.0.
+\else
+ \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
+
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dashChar = `\-
+\chardef\dotChar = `\.
+\chardef\exclamChar= `\!
+\chardef\lquoteChar= `\`
+\chardef\questChar = `\?
+\chardef\rquoteChar= `\'
+\chardef\semiChar = `\;
+\chardef\underChar = `\_
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+ Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+ ap-pen-dix bit-map bit-maps
+ data-base data-bases eshell fall-ing half-way long-est man-u-script
+ man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+ par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+ spell-ing spell-ings
+ stand-alone strong-est time-stamp time-stamps which-ever white-space
+ wide-spread wrap-around
+}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt}
+
+% @| inserts a changebar to the left of the current line. It should
+% surround any changed text. This approach does *not* work if the
+% change spans more than two lines of output. To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
+%
+\def\|{%
+ % \vadjust can only be used in horizontal mode.
+ \leavevmode
+ %
+ % Append this vertical mode material after the current line in the output.
+ \vadjust{%
+ % We want to insert a rule with the height and depth of the current
+ % leading; that is exactly what \strutbox is supposed to record.
+ \vskip-\baselineskip
+ %
+ % \vadjust-items are inserted at the left edge of the type. So
+ % the \llap here moves out into the left-hand margin.
+ \llap{%
+ %
+ % For a thicker or thinner bar, change the `1pt'.
+ \vrule height\baselineskip width1pt
+ %
+ % This is the space between the bar and the text.
+ \hskip 12pt
+ }%
+ }%
+}
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal. We don't just call \tracingall here,
+% since that produces some useless output on the terminal. We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+ \tracingstats2
+ \tracingpages1
+ \tracinglostchars2 % 2 gives us more in etex
+ \tracingparagraphs1
+ \tracingoutput1
+ \tracingmacros2
+ \tracingrestores1
+ \showboxbreadth\maxdimen \showboxdepth\maxdimen
+ \ifx\eTeXversion\undefined\else % etex gives us more logging
+ \tracingscantokens1
+ \tracingifs1
+ \tracinggroups1
+ \tracingnesting2
+ \tracingassigns1
+ \fi
+ \tracingcommands3 % 3 gives us more in etex
+ \errorcontextlines16
+}%
+
+% add check for \lastpenalty to plain's definitions. If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+ \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+ \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+ \removelastskip\penalty-200\bigskip\fi\fi}
+
+% For @cropmarks command.
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument. Note that \pagecontents
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+ \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+ %
+ \ifodd\pageno \advance\hoffset by \bindingoffset
+ \else \advance\hoffset by -\bindingoffset\fi
+ %
+ % Do this outside of the \shipout so @code etc. will be expanded in
+ % the headline as they should be, not taken literally (outputting ''code).
+ \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+ \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+ %
+ {%
+ % Have to do this stuff outside the \shipout because we want it to
+ % take effect in \write's, yet the group defined by the \vbox ends
+ % before the \shipout runs.
+ %
+ \indexdummies % don't expand commands in the output.
+ \normalturnoffactive % \ in index entries must not stay \, e.g., if
+ % the page break happens to be in the middle of an example.
+ % We don't want .vr (or whatever) entries like this:
+ % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+ % "\acronym" won't work when it's read back in;
+ % it needs to be
+ % {\code {{\tt \backslashcurfont }acronym}
+ \shipout\vbox{%
+ % Do this early so pdf references go to the beginning of the page.
+ \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+ %
+ \ifcropmarks \vbox to \outervsize\bgroup
+ \hsize = \outerhsize
+ \vskip-\topandbottommargin
+ \vtop to0pt{%
+ \line{\ewtop\hfil\ewtop}%
+ \nointerlineskip
+ \line{%
+ \vbox{\moveleft\cornerthick\nstop}%
+ \hfill
+ \vbox{\moveright\cornerthick\nstop}%
+ }%
+ \vss}%
+ \vskip\topandbottommargin
+ \line\bgroup
+ \hfil % center the page within the outer (page) hsize.
+ \ifodd\pageno\hskip\bindingoffset\fi
+ \vbox\bgroup
+ \fi
+ %
+ \unvbox\headlinebox
+ \pagebody{#1}%
+ \ifdim\ht\footlinebox > 0pt
+ % Only leave this space if the footline is nonempty.
+ % (We lessened \vsize for it in \oddfootingyyy.)
+ % The \baselineskip=24pt in plain's \makefootline has no effect.
+ \vskip 24pt
+ \unvbox\footlinebox
+ \fi
+ %
+ \ifcropmarks
+ \egroup % end of \vbox\bgroup
+ \hfil\egroup % end of (centering) \line\bgroup
+ \vskip\topandbottommargin plus1fill minus1fill
+ \boxmaxdepth = \cornerthick
+ \vbox to0pt{\vss
+ \line{%
+ \vbox{\moveleft\cornerthick\nsbot}%
+ \hfill
+ \vbox{\moveright\cornerthick\nsbot}%
+ }%
+ \nointerlineskip
+ \line{\ewbot\hfil\ewbot}%
+ }%
+ \egroup % \vbox from first cropmarks clause
+ \fi
+ }% end of \shipout\vbox
+ }% end of group with \indexdummies
+ \advancepageno
+ \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+ \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1 \unvbox#1
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks. Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+ {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+ {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+% Parse an argument, then pass it to #1. The argument is the rest of
+% the input line (except we remove a trailing comment). #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+ \def\argtorun{#2}%
+ \begingroup
+ \obeylines
+ \spaceisspace
+ #1%
+ \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+ \gdef\parseargline#1^^M{%
+ \endgroup % End of the group started in \parsearg.
+ \argremovecomment #1\comment\ArgTerm%
+ }%
+}
+
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+% @end itemize @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+ \def\temp{#3}%
+ \ifx\temp\empty
+ % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
+ \let\temp\finishparsearg
+ \else
+ \let\temp\argcheckspaces
+ \fi
+ % Put the space token in:
+ \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \argtorun.
+% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+
+% \parseargdef\foo{...}
+% is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick. --kasal, 16nov03
+
+\def\parseargdef#1{%
+ \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+ \def#2{\parsearg#1}%
+ \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+ \obeyspaces
+ \gdef\obeyedspace{ }
+
+ % Make each space character in the input produce a normal interword
+ % space in the output. Don't allow a line break at this space, as this
+ % is used only in environments like @example, where each line of input
+ % should produce a line of output anyway.
+ %
+ \gdef\sepspaces{\obeyspaces\let =\tie}
+
+ % If an index command is used in an @example environment, any spaces
+ % therein should become regular spaces in the raw index file, not the
+ % expansion of \tie (\leavevmode \penalty \@M \ ).
+ \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex. It's used like this:
+%
+% \envdef\foo{...}
+% \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo. \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches. The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as enviroments; they don't open a group. (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At runtime, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+ \def\temp{#1}%
+ \ifx\thisenv\temp
+ \else
+ \badenverr
+ \fi
+}
+
+% Evironment mismatch, #1 expected:
+\def\badenverr{%
+ \errhelp = \EMsimple
+ \errmessage{This command can appear only \inenvironment\temp,
+ not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+ \ifx#1\empty
+ out of any environment%
+ \else
+ in environment \expandafter\string#1%
+ \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+ \if 1\csname iscond.#1\endcsname
+ \else
+ % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
+ \expandafter\checkenv\csname#1\endcsname
+ \csname E#1\endcsname
+ \endgroup
+ \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+%% Simple single-character @ commands
+
+% @@ prints an @
+% Kludge this until the fonts are right (grr).
+\def\@{{\tt\char64}}
+
+% This is turned off because it was never documented
+% and you can use @w{...} around a quote to suppress ligatures.
+%% Define @` and @' to be the same as ` and '
+%% but suppressing ligatures.
+%\def\`{{`}}
+%\def\'{{'}}
+
+% Used to generate quoted braces.
+\def\mylbrace {{\tt\char123}}
+\def\myrbrace {{\tt\char125}}
+\let\{=\mylbrace
+\let\}=\myrbrace
+\begingroup
+ % Definitions to produce \{ and \} commands for indices,
+ % and @{ and @} for the aux/toc files.
+ \catcode`\{ = \other \catcode`\} = \other
+ \catcode`\[ = 1 \catcode`\] = 2
+ \catcode`\! = 0 \catcode`\\ = \other
+ !gdef!lbracecmd[\{]%
+ !gdef!rbracecmd[\}]%
+ !gdef!lbraceatcmd[@{]%
+ !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+ \def\temp{#1}%
+ \ifx\temp\imacro \ptexi
+ \else\ifx\temp\jmacro \j
+ \else \errmessage{@dotless can be used only with i or j}%
+ \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence. (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo. Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+ L\kern-.36em
+ {\setbox0=\hbox{T}%
+ \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
+ \kern-.15em
+ \TeX
+}
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+ \def\temp{#1}%
+ \ifx\temp\onword \plainfrenchspacing
+ \else\ifx\temp\offword \plainnonfrenchspacing
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+ \fi\fi
+}
+
+% @w prevents a word break. Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line. According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0). If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large. This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material. In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom. The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+ \ifnum\catcode`\^^M=\active \else
+ \errhelp = \groupinvalidhelp
+ \errmessage{@group invalid in context where filling is enabled}%
+ \fi
+ \startsavinginserts
+ %
+ \setbox\groupbox = \vtop\bgroup
+ % Do @comment since we are called inside an environment such as
+ % @example, where each end-of-line in the input causes an
+ % end-of-line in the output. We don't want the end-of-line after
+ % the `@group' to put extra space in the output. Since @group
+ % should appear on a line by itself (according to the Texinfo
+ % manual), we don't worry about eating any user text.
+ \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it. Thus, space below is not quite equal to space
+% above. But it's pretty close.
+\def\Egroup{%
+ % To get correct interline space between the last line of the group
+ % and the first line afterwards, we have to propagate \prevdepth.
+ \endgraf % Not \par, as it may have been set to \lisppar.
+ \global\dimen1 = \prevdepth
+ \egroup % End the \vtop.
+ % \dimen0 is the vertical size of the group's box.
+ \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
+ % \dimen2 is how much space is left on the page (more or less).
+ \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
+ % if the group doesn't fit on the current page, and it's a big big
+ % group, force a page break.
+ \ifdim \dimen0 > \dimen2
+ \ifdim \pagetotal < \vfilllimit\pageheight
+ \page
+ \fi
+ \fi
+ \box\groupbox
+ \prevdepth = \dimen1
+ \checkinserts
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil \mil=0.001in
+
+% Old definition--didn't work.
+%\parseargdef\need{\par %
+%% This method tries to make TeX break the page naturally
+%% if the depth of the box does not fit.
+%{\baselineskip=0pt%
+%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
+%\prevdepth=-1000pt
+%}}
+
+\parseargdef\need{%
+ % Ensure vertical mode, so we don't make a big box in the middle of a
+ % paragraph.
+ \par
+ %
+ % If the @need value is less than one line space, it's useless.
+ \dimen0 = #1\mil
+ \dimen2 = \ht\strutbox
+ \advance\dimen2 by \dp\strutbox
+ \ifdim\dimen0 > \dimen2
+ %
+ % Do a \strut just to make the height of this box be normal, so the
+ % normal leading is inserted relative to the preceding line.
+ % And a page break here is fine.
+ \vtop to #1\mil{\strut\vfil}%
+ %
+ % TeX does not even consider page breaks if a penalty added to the
+ % main vertical list is 10000 or more. But in order to see if the
+ % empty box we just added fits on the page, we must make it consider
+ % page breaks. On the other hand, we don't want to actually break the
+ % page after the empty box. So we use a penalty of 9999.
+ %
+ % There is an extremely small chance that TeX will actually break the
+ % page at this \penalty, if there are no other feasible breakpoints in
+ % sight. (If the user is using lots of big @group commands, which
+ % almost-but-not-quite fill up a page, TeX will have a hard time doing
+ % good page breaking, for example.) However, I could not construct an
+ % example where a page broke at this \penalty; if it happens in a real
+ % document, then we can reconsider our strategy.
+ \penalty9999
+ %
+ % Back up by the size of the box, whether we did a page break or not.
+ \kern -#1\mil
+ %
+ % Do not allow a page break right after this kern.
+ \nobreak
+ \fi
+}
+
+% @br forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+ \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph. For more general purposes, use the \margin insertion
+% class. WHICH is `l' or `r'.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+ \nobreak
+ \kern-\strutdepth
+ \vtop to \strutdepth{%
+ \baselineskip=\strutdepth
+ \vss
+ % if you have multiple lines of stuff to put here, you'll need to
+ % make the vbox yourself of the appropriate size.
+ \ifx#1l%
+ \llap{\ignorespaces #2\hskip\inmarginspacing}%
+ \else
+ \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+ \fi
+ \null
+ }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \def\lefttext{#1}% have both texts
+ \def\righttext{#2}%
+ \else
+ \def\lefttext{#1}% have only one text
+ \def\righttext{#1}%
+ \fi
+ %
+ \ifodd\pageno
+ \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+ \else
+ \def\temp{\inleftmargin\lefttext}%
+ \fi
+ \temp
+}
+
+% @include file insert text of that file as input.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+ \pushthisfilestack
+ \def\thisfile{#1}%
+ {%
+ \makevalueexpandable
+ \def\temp{\input #1 }%
+ \expandafter
+ }\temp
+ \popthisfilestack
+}
+\def\filenamecatcodes{%
+ \catcode`\\=\other
+ \catcode`~=\other
+ \catcode`^=\other
+ \catcode`_=\other
+ \catcode`|=\other
+ \catcode`<=\other
+ \catcode`>=\other
+ \catcode`+=\other
+ \catcode`-=\other
+}
+
+\def\pushthisfilestack{%
+ \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+ \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+ \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+ the stack of filenames is empty.}}
+
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+ \ifhmode
+ \let\next\centerH
+ \else
+ \let\next\centerV
+ \fi
+ \next{\hfil \ignorespaces#1\unskip \hfil}%
+}
+\def\centerH#1{%
+ {%
+ \hfil\break
+ \advance\hsize by -\leftskip
+ \advance\hsize by -\rightskip
+ \line{#1}%
+ \break
+ }%
+}
+\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
+
+% @sp n outputs n lines of vertical space
+
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore is another way to write a comment
+
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
+
+\let\c=\comment
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \defaultparindent = 0pt
+ \else
+ \defaultparindent = #1em
+ \fi
+ \fi
+ \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \lispnarrowing = 0pt
+ \else
+ \lispnarrowing = #1em
+ \fi
+ \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading. If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+ \def\temp{#1}%
+ \ifx\temp\noneword
+ \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+ \else\ifx\temp\insertword
+ \let\suppressfirstparagraphindent = \relax
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @firstparagraphindent option `\temp'}%
+ \fi\fi
+}
+
+% Here is how we actually suppress indentation. Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+ \gdef\indent{%
+ \restorefirstparagraphindent
+ \indent
+ }%
+ \gdef\noindent{%
+ \restorefirstparagraphindent
+ \noindent
+ }%
+ \global\everypar = {%
+ \kern -\parindent
+ \restorefirstparagraphindent
+ }%
+}
+
+\gdef\restorefirstparagraphindent{%
+ \global \let \indent = \ptexindent
+ \global \let \noindent = \ptexnoindent
+ \global \everypar = {}%
+}
+
+
+% @asis just yields its argument. Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}. So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+ \catcode`\_ = \active
+ \gdef\mathunderscore{%
+ \catcode`\_=\active
+ \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+ }
+}
+% Another complication: we want \\ (and @\) to output a \ character.
+% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
+% this is not advertised and we don't care. Texinfo does not
+% otherwise define @\.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+ \tex
+ \mathunderscore
+ \let\\ = \mathbackslash
+ \mathactive
+ $\finishmath
+}
+\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+ \catcode`^ = \active
+ \catcode`< = \active
+ \catcode`> = \active
+ \catcode`+ = \active
+ \gdef\mathactive{%
+ \let^ = \ptexhat
+ \let< = \ptexless
+ \let> = \ptexgtr
+ \let+ = \ptexplus
+ }
+}
+
+% @bullet and @minus need the same treatment as @math, just above.
+\def\bullet{$\ptexbullet$}
+\def\minus{$-$}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em. So do
+% whichever is larger.
+%
+\def\dots{%
+ \leavevmode
+ \setbox0=\hbox{...}% get width of three periods
+ \ifdim\wd0 > 1.5em
+ \dimen0 = \wd0
+ \else
+ \dimen0 = 1.5em
+ \fi
+ \hbox to \dimen0{%
+ \hskip 0pt plus.25fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus.5fil
+ }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+ \dots
+ \spacefactor=\endofsentencespacefactor
+}
+
+% @comma{} is so commas can be inserted into text without messing up
+% Texinfo's parsing.
+%
+\let\comma = ,
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+ \fixbackslash % Turn off hack to swallow `\input texinfo'.
+ \iflinks
+ \tryauxfile
+ % Open the new aux file. TeX will close it automatically at exit.
+ \immediate\openout\auxfile=\jobname.aux
+ \fi % \openindices needs to do some work in any case.
+ \openindices
+ \let\setfilename=\comment % Ignore extra @setfilename cmds.
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc.
+ \openin 1 texinfo.cnf
+ \ifeof 1 \else \input texinfo.cnf \fi
+ \closein 1
+ %
+ \comment % Ignore the actual filename.
+}
+
+% Called from \setfilename.
+%
+\def\openindices{%
+ \newindex{cp}%
+ \newcodeindex{fn}%
+ \newcodeindex{vr}%
+ \newcodeindex{tp}%
+ \newcodeindex{ky}%
+ \newcodeindex{pg}%
+}
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set). So we test for \relax and 0 as well as \undefined,
+% borrowed from ifpdf.sty.
+\ifx\pdfoutput\undefined
+\else
+ \ifx\pdfoutput\relax
+ \else
+ \ifcase\pdfoutput
+ \else
+ \pdftrue
+ \fi
+ \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places. Thus, we have to
+% double any backslashes. Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e. Not good.
+% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
+% (and related messages, the final outcome is that it is up to the TeX
+% user to double the backslashes and otherwise make the string valid, so
+% that's what we do).
+
+% double active backslashes.
+%
+{\catcode`\@=0 \catcode`\\=\active
+ @gdef@activebackslashdouble{%
+ @catcode`@\=@active
+ @let\=@doublebackslash}
+}
+
+% To handle parens, we must adopt a different approach, since parens are
+% not active characters. hyperref.dtx (which has the same problem as
+% us) handles it with this amazing macro to replace tokens. I've
+% tinkered with it a little for texinfo, but it's definitely from there.
+%
+% #1 is the tokens to replace.
+% #2 is the replacement.
+% #3 is the control sequence with the string.
+%
+\def\HyPsdSubst#1#2#3{%
+ \def\HyPsdReplace##1#1##2\END{%
+ ##1%
+ \ifx\\##2\\%
+ \else
+ #2%
+ \HyReturnAfterFi{%
+ \HyPsdReplace##2\END
+ }%
+ \fi
+ }%
+ \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
+}
+\long\def\HyReturnAfterFi#1\fi{\fi#1}
+
+% #1 is a control sequence in which to do the replacements.
+\def\backslashparens#1{%
+ \xdef#1{#1}% redefine it as its expansion; the definition is simply
+ % \lastnode when called from \setref -> \pdfmkdest.
+ \HyPsdSubst{(}{\realbackslash(}{#1}%
+ \HyPsdSubst{)}{\realbackslash)}{#1}%
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found. (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+ \input pdfcolor
+ \pdfcatalog{/PageMode /UseOutlines}%
+ % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+ \def\dopdfimage#1#2#3{%
+ \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+ \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+ %
+ % pdftex (and the PDF format) support .png, .jpg, .pdf (among
+ % others). Let's try in that order.
+ \let\pdfimgext=\empty
+ \begingroup
+ \openin 1 #1.png \ifeof 1
+ \openin 1 #1.jpg \ifeof 1
+ \openin 1 #1.jpeg \ifeof 1
+ \openin 1 #1.JPG \ifeof 1
+ \openin 1 #1.pdf \ifeof 1
+ \errhelp = \nopdfimagehelp
+ \errmessage{Could not find image file #1 for pdf}%
+ \else
+ \gdef\pdfimgext{pdf}%
+ \fi
+ \else
+ \gdef\pdfimgext{JPG}%
+ \fi
+ \else
+ \gdef\pdfimgext{jpeg}%
+ \fi
+ \else
+ \gdef\pdfimgext{jpg}%
+ \fi
+ \else
+ \gdef\pdfimgext{png}%
+ \fi
+ \closein 1
+ \endgroup
+ %
+ % without \immediate, pdftex seg faults when the same image is
+ % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
+ \ifnum\pdftexversion < 14
+ \immediate\pdfimage
+ \else
+ \immediate\pdfximage
+ \fi
+ \ifdim \wd0 >0pt width \imagewidth \fi
+ \ifdim \wd2 >0pt height \imageheight \fi
+ \ifnum\pdftexversion<13
+ #1.\pdfimgext
+ \else
+ {#1.\pdfimgext}%
+ \fi
+ \ifnum\pdftexversion < 14 \else
+ \pdfrefximage \pdflastximage
+ \fi}
+ \def\pdfmkdest#1{{%
+ % We have to set dummies so commands such as @code, and characters
+ % such as \, aren't expanded when present in a section title.
+ \atdummies
+ \activebackslashdouble
+ \def\pdfdestname{#1}%
+ \backslashparens\pdfdestname
+ \pdfdest name{\pdfdestname} xyz%
+ }}%
+ %
+ % used to mark target names; must be expandable.
+ \def\pdfmkpgn#1{#1}%
+ %
+ \let\linkcolor = \Blue % was Cyan, but that seems light?
+ \def\endlink{\Black\pdfendlink}
+ % Adding outlines to PDF; macros for calculating structure of outlines
+ % come from Petr Olsak
+ \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+ \else \csname#1\endcsname \fi}
+ \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+ \advance\tempnum by 1
+ \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+ %
+ % #1 is the section text, which is what will be displayed in the
+ % outline by the pdf viewer. #2 is the pdf expression for the number
+ % of subentries (or empty, for subsubsections). #3 is the node text,
+ % which might be empty if this toc entry had no corresponding node.
+ % #4 is the page number
+ %
+ \def\dopdfoutline#1#2#3#4{%
+ % Generate a link to the node text if that exists; else, use the
+ % page number. We could generate a destination for the section
+ % text in the case where a section has no node, but it doesn't
+ % seem worth the trouble, since most documents are normally structured.
+ \def\pdfoutlinedest{#3}%
+ \ifx\pdfoutlinedest\empty
+ \def\pdfoutlinedest{#4}%
+ \else
+ % Doubled backslashes in the name.
+ {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
+ \backslashparens\pdfoutlinedest}%
+ \fi
+ %
+ % Also double the backslashes in the display string.
+ {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
+ \backslashparens\pdfoutlinetext}%
+ %
+ \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+ }
+ %
+ \def\pdfmakeoutlines{%
+ \begingroup
+ % Thanh's hack / proper braces in bookmarks
+ \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
+ \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
+ %
+ % Read toc silently, to get counts of subentries for \pdfoutline.
+ \def\numchapentry##1##2##3##4{%
+ \def\thischapnum{##2}%
+ \def\thissecnum{0}%
+ \def\thissubsecnum{0}%
+ }%
+ \def\numsecentry##1##2##3##4{%
+ \advancenumber{chap\thischapnum}%
+ \def\thissecnum{##2}%
+ \def\thissubsecnum{0}%
+ }%
+ \def\numsubsecentry##1##2##3##4{%
+ \advancenumber{sec\thissecnum}%
+ \def\thissubsecnum{##2}%
+ }%
+ \def\numsubsubsecentry##1##2##3##4{%
+ \advancenumber{subsec\thissubsecnum}%
+ }%
+ \def\thischapnum{0}%
+ \def\thissecnum{0}%
+ \def\thissubsecnum{0}%
+ %
+ % use \def rather than \let here because we redefine \chapentry et
+ % al. a second time, below.
+ \def\appentry{\numchapentry}%
+ \def\appsecentry{\numsecentry}%
+ \def\appsubsecentry{\numsubsecentry}%
+ \def\appsubsubsecentry{\numsubsubsecentry}%
+ \def\unnchapentry{\numchapentry}%
+ \def\unnsecentry{\numsecentry}%
+ \def\unnsubsecentry{\numsubsecentry}%
+ \def\unnsubsubsecentry{\numsubsubsecentry}%
+ \readdatafile{toc}%
+ %
+ % Read toc second time, this time actually producing the outlines.
+ % The `-' means take the \expnumber as the absolute number of
+ % subentries, which we calculated on our first read of the .toc above.
+ %
+ % We use the node names as the destinations.
+ \def\numchapentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+ \def\numsecentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+ \def\numsubsecentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+ \def\numsubsubsecentry##1##2##3##4{% count is always zero
+ \dopdfoutline{##1}{}{##3}{##4}}%
+ %
+ % PDF outlines are displayed using system fonts, instead of
+ % document fonts. Therefore we cannot use special characters,
+ % since the encoding is unknown. For example, the eogonek from
+ % Latin 2 (0xea) gets translated to a | character. Info from
+ % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+ %
+ % xx to do this right, we have to translate 8-bit characters to
+ % their "best" equivalent, based on the @documentencoding. Right
+ % now, I guess we'll just let the pdf reader have its way.
+ \indexnofonts
+ \setupdatafile
+ \catcode`\\=\active \otherbackslash
+ \input \jobname.toc
+ \endgroup
+ }
+ %
+ \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+ \ifx\PP\D\let\nextsp\relax
+ \else\let\nextsp\skipspaces
+ \ifx\p\space\else\addtokens{\filename}{\PP}%
+ \advance\filenamelength by 1
+ \fi
+ \fi
+ \nextsp}
+ \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+ \ifnum\pdftexversion < 14
+ \let \startlink \pdfannotlink
+ \else
+ \let \startlink \pdfstartlink
+ \fi
+ % make a live url in pdf output.
+ \def\pdfurl#1{%
+ \begingroup
+ % it seems we really need yet another set of dummies; have not
+ % tried to figure out what each command should do in the context
+ % of @url. for now, just make @/ a no-op, that's the only one
+ % people have actually reported a problem with.
+ %
+ \normalturnoffactive
+ \def\@{@}%
+ \let\/=\empty
+ \makevalueexpandable
+ \leavevmode\Red
+ \startlink attr{/Border [0 0 0]}%
+ user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+ \endgroup}
+ \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+ \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+ \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+ \def\maketoks{%
+ \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+ \ifx\first0\adn0
+ \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+ \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+ \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+ \else
+ \ifnum0=\countA\else\makelink\fi
+ \ifx\first.\let\next=\done\else
+ \let\next=\maketoks
+ \addtokens{\toksB}{\the\toksD}
+ \ifx\first,\addtokens{\toksB}{\space}\fi
+ \fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \next}
+ \def\makelink{\addtokens{\toksB}%
+ {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+ \def\pdflink#1{%
+ \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+ \linkcolor #1\endlink}
+ \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+ \let\pdfmkdest = \gobble
+ \let\pdfurl = \gobble
+ \let\endlink = \relax
+ \let\linkcolor = \relax
+ \let\pdfmakeoutlines = \relax
+\fi % \ifx\pdfoutput
+
+
+\message{fonts,}
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+ \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+ \csname ten#1\endcsname % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+
+% Default leading.
+\newdimen\textleading \textleading = 13.2pt
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly. There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+\def\setleading#1{%
+ \normalbaselineskip = #1\relax
+ \normallineskip = \lineskipfactor\normalbaselineskip
+ \normalbaselines
+ \setbox\strutbox =\hbox{%
+ \vrule width0pt height\strutheightpercent\baselineskip
+ depth \strutdepthpercent \baselineskip
+ }%
+}
+
+
+% Set the font macro #1 to the font named #2, adding on the
+% specified font prefix (normally `cm').
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\undefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx} %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Definitions for a main text size of 11pt. This is the default in
+% Texinfo.
+%
+\def\definetextfontsizexi{
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}
+\setfont\deftt\ttshape{10}{\magstep1}
+\setfont\defttsl\ttslshape{10}{\magstep1}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{17}{1000}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}
+\setfont\reducedtt\ttshape{10}{1000}
+\setfont\reducedbf\bfshape{10}{1000}
+\setfont\reducedit\itshape{10}{1000}
+\setfont\reducedsl\slshape{10}{1000}
+\setfont\reducedsf\sfshape{10}{1000}
+\setfont\reducedsc\scshape{10}{1000}
+\setfont\reducedttsl\ttslshape{10}{1000}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+
+% reset the current fonts
+\textfonts
+\rm
+} % end of 11pt text font size definitions
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit. This is for the GNU
+% Press printing of the Emacs 22 manual. Maybe other manuals in the
+% future. Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}
+\setfont\deftt\ttshape{10}{\magstephalf}
+\setfont\defttsl\ttslshape{10}{\magstephalf}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}
+\setfont\chapit\itbshape{10}{\magstep2}
+\setfont\chapsl\slbshape{10}{\magstep2}
+\setfont\chaptt\ttbshape{12}{\magstep1}
+\setfont\chapttsl\ttslshape{10}{\magstep2}
+\setfont\chapsf\sfbshape{12}{\magstep1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}
+\setfont\secit\itbshape{10}{\magstep1}
+\setfont\secsl\slbshape{10}{\magstep1}
+\setfont\sectt\ttbshape{12}{1000}
+\setfont\secttsl\ttslshape{10}{\magstep1}
+\setfont\secsf\sfbshape{12}{1000}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}
+\setfont\ssecit\itbshape{10}{1000}
+\setfont\ssecsl\slbshape{10}{1000}
+\setfont\ssectt\ttbshape{10}{1000}
+\setfont\ssecttsl\ttslshape{10}{1000}
+\setfont\ssecsf\sfbshape{10}{1000}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}
+\setfont\reducedtt\ttshape{9}{1000}
+\setfont\reducedbf\bfshape{10}{900}
+\setfont\reducedit\itshape{9}{1000}
+\setfont\reducedsl\slshape{9}{1000}
+\setfont\reducedsf\sfshape{9}{1000}
+\setfont\reducedsc\scshape{10}{900}
+\setfont\reducedttsl\ttslshape{10}{900}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+
+% reduce space between paragraphs
+\divide\parskip by 2
+
+% reset the current fonts
+\textfonts
+\rm
+} % end of 10pt text font size definitions
+
+
+% We provide the user-level command
+% @fonttextsize 10
+% (or 11) to redefine the text font size. pt is assumed.
+%
+\def\xword{10}
+\def\xiword{11}
+%
+\parseargdef\fonttextsize{%
+ \def\textsizearg{#1}%
+ \wlog{doing @fonttextsize \textsizearg}%
+ %
+ % Set \globaldefs so that documents can use this inside @tex, since
+ % makeinfo 4.8 does not support it, but we need it nonetheless.
+ %
+ \begingroup \globaldefs=1
+ \ifx\textsizearg\xword \definetextfontsizex
+ \else \ifx\textsizearg\xiword \definetextfontsizexi
+ \else
+ \errhelp=\EMsimple
+ \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+ \fi\fi
+ \endgroup
+}
+
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families. Since
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
+%
+\def\resetmathfonts{%
+ \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+ \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+ \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE. We do this because \STYLE needs to also set the
+% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower). These relative commands are used in
+% the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+ \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+ \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+ \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+ \let\tenttsl=\textttsl
+ \def\curfontsize{text}%
+ \def\lsize{reduced}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+ \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+ \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+ \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+ \let\tenttsl=\titlettsl
+ \def\curfontsize{title}%
+ \def\lsize{chap}\def\lllsize{subsec}%
+ \resetmathfonts \setleading{25pt}}
+\def\titlefont#1{{\titlefonts\rm #1}}
+\def\chapfonts{%
+ \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+ \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+ \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+ \let\tenttsl=\chapttsl
+ \def\curfontsize{chap}%
+ \def\lsize{sec}\def\lllsize{text}%
+ \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+ \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+ \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+ \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+ \let\tenttsl=\secttsl
+ \def\curfontsize{sec}%
+ \def\lsize{subsec}\def\lllsize{reduced}%
+ \resetmathfonts \setleading{16pt}}
+\def\subsecfonts{%
+ \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+ \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+ \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+ \let\tenttsl=\ssecttsl
+ \def\curfontsize{ssec}%
+ \def\lsize{text}\def\lllsize{small}%
+ \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+ \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+ \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+ \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+ \let\tenttsl=\reducedttsl
+ \def\curfontsize{reduced}%
+ \def\lsize{small}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+ \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+ \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+ \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+ \let\tenttsl=\smallttsl
+ \def\curfontsize{small}%
+ \def\lsize{smaller}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+ \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+ \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+ \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+ \let\tenttsl=\smallerttsl
+ \def\curfontsize{smaller}%
+ \def\lsize{smaller}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{9.5pt}}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+% 8.5x11=86 smallbook=72 a4=90 a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+% 8.5x11=90+ smallbook=80 a4=90+ a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt. So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+% 8.5x11=71 smallbook=60 a4=75 a5=58
+%
+% I wish the USA used A4 paper.
+% --karl, 24jan03.
+
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\definetextfontsizexi
+
+% Define these so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}
+\setfont\shortconttt\ttshape{12}{1000}
+
+%% Add scribe-like font environments, plus @l for inline lisp (usually sans
+%% serif) and @ii for TeX italic
+
+% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
+% unless the following character is such as not to need one.
+\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
+ \ptexslash\fi\fi\fi}
+\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
+\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
+
+% like \smartslanted except unconditionally uses \ttsl.
+% @var is set to this for defun arguments.
+\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
+
+% like \smartslanted except unconditionally use \sl. We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\var=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% @b, explicit bold.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph. Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+ \def\plainfrenchspacing{%
+ \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+ \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+ \def\endofsentencespacefactor{1000}% for @. and friends
+ }
+ \def\plainnonfrenchspacing{%
+ \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+ \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+ \def\endofsentencespacefactor{3000}% for @. and friends
+ }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+\def\t#1{%
+ {\tt \rawbackslash \plainfrenchspacing #1}%
+ \null
+}
+\def\samp#1{`\tclose{#1}'\null}
+\setfont\keyrm\rmshape{8}{1000}
+\font\keysy=cmsy9
+\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+ \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+ \vbox{\hrule\kern-0.4pt
+ \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+ \kern-0.4pt\hrule}%
+ \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+\def\key #1{{\nohyphenation \uppercase{#1}}\null}
+% The old definition, with no lozenge:
+%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @file, @option are the same as @samp.
+\let\file=\samp
+\let\option=\samp
+
+% @code is a modification of @t,
+% which makes spaces the same size as normal in the surrounding text.
+\def\tclose#1{%
+ {%
+ % Change normal interword space to be same as for the current font.
+ \spaceskip = \fontdimen2\font
+ %
+ % Switch to typewriter.
+ \tt
+ %
+ % But `\ ' produces the large typewriter interword space.
+ \def\ {{\spaceskip = 0pt{} }}%
+ %
+ % Turn off hyphenation.
+ \nohyphenation
+ %
+ \rawbackslash
+ \plainfrenchspacing
+ #1%
+ }%
+ \null
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash.
+% -- rms.
+{
+ \catcode`\-=\active \catcode`\_=\active
+ \catcode`\'=\active \catcode`\`=\active
+ %
+ \global\def\code{\begingroup
+ \catcode\rquoteChar=\active \catcode\lquoteChar=\active
+ \let'\codequoteright \let`\codequoteleft
+ %
+ \catcode\dashChar=\active \catcode\underChar=\active
+ \ifallowcodebreaks
+ \let-\codedash
+ \let_\codeunder
+ \else
+ \let-\realdash
+ \let_\realunder
+ \fi
+ \codex
+ }
+}
+
+\def\realdash{-}
+\def\codedash{-\discretionary{}{}{}}
+\def\codeunder{%
+ % this is all so @math{@code{var_name}+1} can work. In math mode, _
+ % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+ % will therefore expand the active definition of _, which is us
+ % (inside @code that is), therefore an endless loop.
+ \ifusingtt{\ifmmode
+ \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+ \else\normalunderscore \fi
+ \discretionary{}{}{}}%
+ {\_}%
+}
+\def\codex #1{\tclose{#1}\endgroup}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__. This is undesirable in
+% some manuals, especially if they don't have long identifiers in
+% general. @allowcodebreaks provides a way to control this.
+%
+\newif\ifallowcodebreaks \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+ \def\txiarg{#1}%
+ \ifx\txiarg\keywordtrue
+ \allowcodebreakstrue
+ \else\ifx\txiarg\keywordfalse
+ \allowcodebreaksfalse
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+ \fi\fi
+}
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+% `example' (@kbd uses ttsl only inside of @example and friends),
+% or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+ \def\txiarg{#1}%
+ \ifx\txiarg\worddistinct
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+ \else\ifx\txiarg\wordexample
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+ \else\ifx\txiarg\wordcode
+ \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
+ \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct.'
+\kbdinputstyle distinct
+
+\def\xkey{\key}
+\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
+\ifx\one\xkey\ifx\threex\three \key{#2}%
+\else{\tclose{\kbdfont\look}}\fi
+\else{\tclose{\kbdfont\look}}\fi}
+
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
+\let\env=\code
+\let\command=\code
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself. First (mandatory) arg is the url. Perhaps eventually put in
+% a hypertex \special here.
+%
+\def\uref#1{\douref #1,,,\finish}
+\def\douref#1,#2,#3,#4\finish{\begingroup
+ \unsepspaces
+ \pdfurl{#1}%
+ \setbox0 = \hbox{\ignorespaces #3}%
+ \ifdim\wd0 > 0pt
+ \unhbox0 % third arg given, show only that
+ \else
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \ifpdf
+ \unhbox0 % PDF: 2nd arg given, show only it
+ \else
+ \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+ \fi
+ \else
+ \code{#1}% only url given, so show it
+ \fi
+ \fi
+ \endlink
+\endgroup}
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+ \def\email#1{\doemail#1,,\finish}
+ \def\doemail#1,#2,#3\finish{\begingroup
+ \unsepspaces
+ \pdfurl{mailto:#1}%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+ \endlink
+ \endgroup}
+\else
+ \let\email=\uref
+\fi
+
+% Check if we are currently using a typewriter font. Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
+
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find. We need it for
+% Polish suppressed-l. --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}} % roman font
+\def\sc#1{{\smallcaps#1}} % smallcaps font
+\def\ii#1{{\it #1}} % italic font
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+ {\selectfonts\lsize #1}%
+ \def\temp{#2}%
+ \ifx\temp\empty \else
+ \space ({\unsepspaces \ignorespaces \temp \unskip})%
+ \fi
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+ {\plainfrenchspacing #1}%
+ \def\temp{#2}%
+ \ifx\temp\empty \else
+ \space ({\unsepspaces \ignorespaces \temp \unskip})%
+ \fi
+}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that. The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math. Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+ % We set the font at each command, rather than predefining it in
+ % \textfonts and the other font-switching commands, so that
+ % installations which never need the symbol don't have to have the
+ % font installed.
+ %
+ % There is only one designed size (nominal 10pt), so we always scale
+ % that to the current nominal size.
+ %
+ % By the way, simply using "at 1em" works for cmr10 and the like, but
+ % does not work for cmbx10 and other extended/shrunken fonts.
+ %
+ \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+ %
+ \ifx\curfontstyle\bfstylename
+ % bold:
+ \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+ \else
+ % regular:
+ \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+ \fi
+ \thiseurofont
+}
+
+% @registeredsymbol - R in a circle. The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+ $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+ \hfil\crcr\Orb}}%
+ }$%
+}
+
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\undefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page. Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+ \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+ % Open one extra group, as we want to close it in the middle of \Etitlepage.
+ \begingroup
+ \parindent=0pt \textfonts
+ % Leave some space at the very top of the page.
+ \vglue\titlepagetopglue
+ % No rule at page bottom unless we print one at the top with @title.
+ \finishedtitlepagetrue
+ %
+ % Most title ``pages'' are actually two pages long, with space
+ % at the top of the second. We don't want the ragged left on the second.
+ \let\oldpage = \page
+ \def\page{%
+ \iffinishedtitlepage\else
+ \finishtitlepage
+ \fi
+ \let\page = \oldpage
+ \page
+ \null
+ }%
+}
+
+\def\Etitlepage{%
+ \iffinishedtitlepage\else
+ \finishtitlepage
+ \fi
+ % It is important to do the page break before ending the group,
+ % because the headline and footline are only empty inside the group.
+ % If we use the new definition of \page, we always get a blank page
+ % after the title page, which we certainly don't want.
+ \oldpage
+ \endgroup
+ %
+ % Need this before the \...aftertitlepage checks so that if they are
+ % in effect the toc pages will come out with page numbers.
+ \HEADINGSon
+ %
+ % If they want short, they certainly want long too.
+ \ifsetshortcontentsaftertitlepage
+ \shortcontents
+ \contents
+ \global\let\shortcontents = \relax
+ \global\let\contents = \relax
+ \fi
+ %
+ \ifsetcontentsaftertitlepage
+ \contents
+ \global\let\contents = \relax
+ \global\let\shortcontents = \relax
+ \fi
+}
+
+\def\finishtitlepage{%
+ \vskip4pt \hrule height 2pt width \hsize
+ \vskip\titlepagebottomglue
+ \finishedtitlepagetrue
+}
+
+%%% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+ \let\tt=\authortt}
+
+\parseargdef\title{%
+ \checkenv\titlepage
+ \leftline{\titlefonts\rm #1}
+ % print a rule at the page bottom also.
+ \finishedtitlepagefalse
+ \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+ \checkenv\titlepage
+ {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+ \def\temp{\quotation}%
+ \ifx\thisenv\temp
+ \def\quotationauthor{#1}% printed in \Equotation.
+ \else
+ \checkenv\titlepage
+ \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+ {\authorfont \leftline{#1}}%
+ \fi
+}
+
+
+%%% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline % headline on even pages
+\newtoks\oddheadline % headline on odd pages
+\newtoks\evenfootline % footline on even pages
+\newtoks\oddfootline % footline on odd pages
+
+% Now make TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+ \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+ \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what @headings on does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+ \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+ %
+ % Leave some space for the footline. Hopefully ok to assume
+ % @evenfooting will not be used by itself.
+ \global\advance\pageheight by -12pt
+ \global\advance\vsize by -12pt
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+
+% @headings double turns headings on for double-sided printing.
+% @headings single turns headings on for single-sided printing.
+% @headings off turns them off.
+% @headings on same as @headings double, retained for compatibility.
+% @headings after turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\def\headings #1 {\csname HEADINGS#1\endcsname}
+
+\def\HEADINGSoff{%
+\global\evenheadline={\hfil} \global\evenfootline={\hfil}
+\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
+\HEADINGSoff
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\undefined
+\def\today{%
+ \number\day\space
+ \ifcase\month
+ \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+ \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+ \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+ \fi
+ \space\number\year}
+\fi
+
+% @settitle line... specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+ \advance\hsize by -\rightskip
+ \advance\hsize by -\tableindent
+ \setbox0=\hbox{\itemindicate{#1}}%
+ \itemindex{#1}%
+ \nobreak % This prevents a break before @itemx.
+ %
+ % If the item text does not fit in the space we have, put it on a line
+ % by itself, and do not allow a page break either before or after that
+ % line. We do not start a paragraph here because then if the next
+ % command is, e.g., @kindex, the whatsit would get put into the
+ % horizontal list on a line by itself, resulting in extra blank space.
+ \ifdim \wd0>\itemmax
+ %
+ % Make this a paragraph so we get the \parskip glue and wrapping,
+ % but leave it ragged-right.
+ \begingroup
+ \advance\leftskip by-\tableindent
+ \advance\hsize by\tableindent
+ \advance\rightskip by0pt plus1fil
+ \leavevmode\unhbox0\par
+ \endgroup
+ %
+ % We're going to be starting a paragraph, but we don't want the
+ % \parskip glue -- logically it's part of the @item we just started.
+ \nobreak \vskip-\parskip
+ %
+ % Stop a page break at the \parskip glue coming up. However, if
+ % what follows is an environment such as @example, there will be no
+ % \parskip glue; then the negative vskip we just inserted would
+ % cause the example and the item to crash together. So we use this
+ % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+ % \parskip glue after all. Section titles are handled this way also.
+ %
+ \penalty 10001
+ \endgroup
+ \itemxneedsnegativevskipfalse
+ \else
+ % The item text fits into the space. Start a paragraph, so that the
+ % following text (if any) will end up on the same line.
+ \noindent
+ % Do this with kerns and \unhbox so that if there is a footnote in
+ % the item text, it can migrate to the main vertical list and
+ % eventually be printed.
+ \nobreak\kern-\tableindent
+ \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+ \unhbox0
+ \nobreak\kern\dimen0
+ \endgroup
+ \itemxneedsnegativevskiptrue
+ \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+ \let\itemindex\gobble
+ \tablecheck{table}%
+}
+\envdef\ftable{%
+ \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+ \tablecheck{ftable}%
+}
+\envdef\vtable{%
+ \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+ \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+ \ifnum \the\catcode`\^^M=\active
+ \endgroup
+ \errmessage{This command won't work in this context; perhaps the problem is
+ that we are \inenvironment\thisenv}%
+ \def\next{\doignore{#1}}%
+ \else
+ \let\next\tablex
+ \fi
+ \next
+}
+\def\tablex#1{%
+ \def\itemindicate{#1}%
+ \parsearg\tabley
+}
+\def\tabley#1{%
+ {%
+ \makevalueexpandable
+ \edef\temp{\noexpand\tablez #1\space\space\space}%
+ \expandafter
+ }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+ \aboveenvbreak
+ \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+ \ifnum 0#2>0 \tableindent=#2\mil \fi
+ \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+ \itemmax=\tableindent
+ \advance \itemmax by -\itemmargin
+ \advance \leftskip by \tableindent
+ \exdentamount=\tableindent
+ \parindent = 0pt
+ \parskip = \smallskipamount
+ \ifdim \parskip=0pt \parskip=2pt \fi
+ \let\item = \internalBitem
+ \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+ \aboveenvbreak
+ \itemmax=\itemindent
+ \advance\itemmax by -\itemmargin
+ \advance\leftskip by \itemindent
+ \exdentamount=\itemindent
+ \parindent=0pt
+ \parskip=\smallskipamount
+ \ifdim\parskip=0pt \parskip=2pt \fi
+ \def\itemcontents{#1}%
+ % @itemize with no arg is equivalent to @itemize @bullet.
+ \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+ \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+ \advance\itemno by 1 % for enumerations
+ {\let\par=\endgraf \smallbreak}% reasonable place to break
+ {%
+ % If the document has an @itemize directly after a section title, a
+ % \nobreak will be last on the list, and \sectionheading will have
+ % done a \vskip-\parskip. In that case, we don't want to zero
+ % parskip, or the item text will crash with the heading. On the
+ % other hand, when there is normal text preceding the item (as there
+ % usually is), we do want to zero parskip, or there would be too much
+ % space. In that case, we won't have a \nobreak before. At least
+ % that's the theory.
+ \ifnum\lastpenalty<10000 \parskip=0in \fi
+ \noindent
+ \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+ \vadjust{\penalty 1200}}% not good to break after first line of item.
+ \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list. No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1 \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+ % If we were given no argument, pretend we were given `1'.
+ \def\thearg{#1}%
+ \ifx\thearg\empty \def\thearg{1}\fi
+ %
+ % Detect if the argument is a single token. If so, it might be a
+ % letter. Otherwise, the only valid thing it can be is a number.
+ % (We will always have one token, because of the test we just made.
+ % This is a good thing, since \splitoff doesn't work given nothing at
+ % all -- the first parameter is undelimited.)
+ \expandafter\splitoff\thearg\endmark
+ \ifx\rest\empty
+ % Only one token in the argument. It could still be anything.
+ % A ``lowercase letter'' is one whose \lccode is nonzero.
+ % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+ % not equal to itself.
+ % Otherwise, we assume it's a number.
+ %
+ % We need the \relax at the end of the \ifnum lines to stop TeX from
+ % continuing to look for a <number>.
+ %
+ \ifnum\lccode\expandafter`\thearg=0\relax
+ \numericenumerate % a number (we hope)
+ \else
+ % It's a letter.
+ \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+ \lowercaseenumerate % lowercase letter
+ \else
+ \uppercaseenumerate % uppercase letter
+ \fi
+ \fi
+ \else
+ % Multiple tokens in the argument. We hope it's a number.
+ \numericenumerate
+ \fi
+}
+
+% An @enumerate whose labels are integers. The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+ \itemno = \thearg
+ \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+ \itemno = \expandafter`\thearg
+ \startenumeration{%
+ % Be sure we're not beyond the end of the alphabet.
+ \ifnum\itemno=0
+ \errmessage{No more lowercase letters in @enumerate; get a bigger
+ alphabet}%
+ \fi
+ \char\lccode\itemno
+ }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+ \itemno = \expandafter`\thearg
+ \startenumeration{%
+ % Be sure we're not beyond the end of the alphabet.
+ \ifnum\itemno=0
+ \errmessage{No more uppercase letters in @enumerate; get a bigger
+ alphabet}
+ \fi
+ \char\uccode\itemno
+ }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments. Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+ \advance\itemno by -1
+ \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble. Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+% @multitable @columnfractions .25 .3 .45
+% @item ...
+%
+% Numbers following @columnfractions are the percent of the total
+% current hsize to be used for each column. You may use as many
+% columns as desired.
+
+
+% Or use a template:
+% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+% @item ...
+% using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+% @item first col stuff @tab second col stuff @tab third col
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
+% @tab Many paragraphs of text may be used in any column.
+%
+% They will wrap at the width determined by the template.
+% @item@tab@tab This will be in third column.
+% @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+% to baseline.
+% 0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1. We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+ \global\advance\colcount by 1
+ \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+ \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+ \def\firstarg{#1}%
+ \ifx\firstarg\xendsetuptable
+ \let\go = \relax
+ \else
+ \ifx\firstarg\xcolumnfractions
+ \global\setpercenttrue
+ \else
+ \ifsetpercent
+ \let\go\pickupwholefraction
+ \else
+ \global\advance\colcount by 1
+ \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+ % separator; typically that is always in the input, anyway.
+ \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \fi
+ \fi
+ \ifx\go\pickupwholefraction
+ % Put the argument back for the \pickupwholefraction call, so
+ % we'll always have a period there to be parsed.
+ \def\go{\pickupwholefraction#1}%
+ \else
+ \let\go = \setuptable
+ \fi%
+ \fi
+ \go
+}
+
+% multitable-only commands.
+%
+% @headitem starts a heading row, which we typeset in bold.
+% Assignments have to be global since we are inside the implicit group
+% of an alignment entry. Note that \everycr resets \everytab.
+\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+%
+% A \tab used to include \hskip1sp. But then the space in a template
+% line is not enough. That is bad. So let's go back to just `&' until
+% we encounter the problem it was intended to solve again.
+% --karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab % insert after every tab.
+%
+\envdef\multitable{%
+ \vskip\parskip
+ \startsavinginserts
+ %
+ % @item within a multitable starts a normal row.
+ % We use \def instead of \let so that if one of the multitable entries
+ % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+ % \endtemplate) expanding \doitemize.
+ \def\item{\crcr}%
+ %
+ \tolerance=9500
+ \hbadness=9500
+ \setmultitablespacing
+ \parskip=\multitableparskip
+ \parindent=\multitableparindent
+ \overfullrule=0pt
+ \global\colcount=0
+ %
+ \everycr = {%
+ \noalign{%
+ \global\everytab={}%
+ \global\colcount=0 % Reset the column counter.
+ % Check for saved footnotes, etc.
+ \checkinserts
+ % Keeps underfull box messages off when table breaks over pages.
+ %\filbreak
+ % Maybe so, but it also creates really weird page breaks when the
+ % table breaks over pages. Wouldn't \vfil be better? Wait until the
+ % problem manifests itself, so it can be fixed for real --karl.
+ }%
+ }%
+ %
+ \parsearg\domultitable
+}
+\def\domultitable#1{%
+ % To parse everything between @multitable and @item:
+ \setuptable#1 \endsetuptable
+ %
+ % This preamble sets up a generic column definition, which will
+ % be used as many times as user calls for columns.
+ % \vtop will set a single line and will also let text wrap and
+ % continue for many paragraphs if desired.
+ \halign\bgroup &%
+ \global\advance\colcount by 1
+ \multistrut
+ \vtop{%
+ % Use the current \colcount to find the correct column width:
+ \hsize=\expandafter\csname col\the\colcount\endcsname
+ %
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ %
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ %
+ % If the user has set preamble in terms of percent of \hsize we will
+ % use that dimension as the width of the column, and the \leftskip
+ % will keep entries from bumping into each other. Table will start at
+ % left margin and final column will justify at right margin.
+ %
+ % Make sure we don't inherit \rightskip from the outer environment.
+ \rightskip=0pt
+ \ifnum\colcount=1
+ % The first column will be indented with the surrounding text.
+ \advance\hsize by\leftskip
+ \else
+ \ifsetpercent \else
+ % If user has not set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace.
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+ \leftskip=\multitablecolspace
+ \fi
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively
+ % marking characters.
+ \noindent\ignorespaces##\unskip\multistrut
+ }\cr
+}
+\def\Emultitable{%
+ \crcr
+ \egroup % end the \halign
+ \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+ \def\multistrut{\strut}% just use the standard line spacing
+ %
+ % Compute \multitablelinespace (if not defined by user) for use in
+ % \multitableparskip calculation. We used define \multistrut based on
+ % this, but (ironically) that caused the spacing to be off.
+ % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%% If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed. They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested. But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+ \expandafter\let\csname #1\endcsname = \relax
+ \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+ % Scan in ``verbatim'' mode:
+ \obeylines
+ \catcode`\@ = \other
+ \catcode`\{ = \other
+ \catcode`\} = \other
+ %
+ % Make sure that spaces turn into tokens that match what \doignoretext wants.
+ \spaceisspace
+ %
+ % Count number of #1's that we've seen.
+ \doignorecount = 0
+ %
+ % Swallow text until we reach the matching `@end #1'.
+ \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+ \obeylines %
+ %
+ \gdef\dodoignore#1{%
+ % #1 contains the command name as a string, e.g., `ifinfo'.
+ %
+ % Define a command to find the next `@end #1'.
+ \long\def\doignoretext##1^^M@end #1{%
+ \doignoretextyyy##1^^M@#1\_STOP_}%
+ %
+ % And this command to find another #1 command, at the beginning of a
+ % line. (Otherwise, we would consider a line `@c @ifset', for
+ % example, to count as an @ifset for nesting.)
+ \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+ %
+ % And now expand that command.
+ \doignoretext ^^M%
+ }%
+}
+
+\def\doignoreyyy#1{%
+ \def\temp{#1}%
+ \ifx\temp\empty % Nothing found.
+ \let\next\doignoretextzzz
+ \else % Found a nested condition, ...
+ \advance\doignorecount by 1
+ \let\next\doignoretextyyy % ..., look for another.
+ % If we're here, #1 ends with ^^M\ifinfo (for example).
+ \fi
+ \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+ \ifnum\doignorecount = 0 % We have just found the outermost @end.
+ \let\next\enddoignore
+ \else % Still inside a nested condition.
+ \advance\doignorecount by -1
+ \let\next\doignoretext % Look for the next @end.
+ \fi
+ \next
+}
+
+% Finish off ignored text.
+{ \obeylines%
+ % Ignore anything after the last `@end #1'; this matters in verbatim
+ % environments, where otherwise the newline after an ignored conditional
+ % would result in a blank line in the output.
+ \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+ {%
+ \makevalueexpandable
+ \def\temp{#2}%
+ \edef\next{\gdef\makecsname{SET#1}}%
+ \ifx\temp\empty
+ \next{}%
+ \else
+ \setzzz#2\endsetzzz
+ \fi
+ }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+ {%
+ \makevalueexpandable
+ \global\expandafter\let\csname SET#1\endcsname=\relax
+ }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+ \catcode`\- = \active \catcode`\_ = \active
+ %
+ \gdef\makevalueexpandable{%
+ \let\value = \expandablevalue
+ % We don't want these characters active, ...
+ \catcode`\-=\other \catcode`\_=\other
+ % ..., but we might end up with active ones in the argument if
+ % we're called from @code, as @code{@value{foo-bar_}}, though.
+ % So \let them to their normal equivalents.
+ \let-\realdash \let_\normalunderscore
+ }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file. This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ {[No value for ``#1'']}%
+ \message{Variable `#1', used in @value, is not set.}%
+ \else
+ \csname SET#1\endcsname
+ \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+ {%
+ \makevalueexpandable
+ \let\next=\empty
+ \expandafter\ifx\csname SET#2\endcsname\relax
+ #1% If not set, redefine \next.
+ \fi
+ \expandafter
+ }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named foo.
+% It automatically defines \fooindex such that
+% \fooindex ...rest of line... puts an entry in the index foo.
+% It also defines \fooindfile to be the number of the output channel for
+% the file that accumulates this index. The file's extension is foo.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
+ \noexpand\doindex{#1}}
+}
+
+% @defindex foo == \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{%
+ \noexpand\docodeindex{#1}}%
+}
+
+
+% @synindex foo bar makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+ % Only do \closeout if we haven't already done it, else we'll end up
+ % closing the target index.
+ \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+ % The \closeout helps reduce unnecessary open files; the limit on the
+ % Acorn RISC OS is a mere 16 files.
+ \expandafter\closeout\csname#2indfile\endcsname
+ \expandafter\let\csname\donesynindex#2\endcsname = 1
+ \fi
+ % redefine \fooindfile:
+ \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+ \expandafter\let\csname#2indfile\endcsname=\temp
+ % redefine \fooindex:
+ \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all \fooindex macros.
+% Argument #1 is generated by the calling \fooindex macro,
+% and it is "foo", the name of the index.
+
+% \doindex just uses \parsearg; it calls \doind for the actual work.
+% This is because \doind is more useful to call from other macros.
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
+\def\singleindexer #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
+\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
+\def\indexdummies{%
+ \escapechar = `\\ % use backslash in output files.
+ \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+ \def\ {\realbackslash\space }%
+ %
+ % Need these in case \tex is in effect and \{ is a \delimiter again.
+ % But can't use \lbracecmd and \rbracecmd because texindex assumes
+ % braces and backslashes are used only as delimiters.
+ \let\{ = \mylbrace
+ \let\} = \myrbrace
+ %
+ % I don't entirely understand this, but when an index entry is
+ % generated from a macro call, the \endinput which \scanmacro inserts
+ % causes processing to be prematurely terminated. This is,
+ % apparently, because \indexsorttmp is fully expanded, and \endinput
+ % is an expandable command. The redefinition below makes \endinput
+ % disappear altogether for that purpose -- although logging shows that
+ % processing continues to some further point. On the other hand, it
+ % seems \endinput does not hurt in the printed index arg, since that
+ % is still getting written without apparent harm.
+ %
+ % Sample source (mac-idx3.tex, reported by Graham Percival to
+ % help-texinfo, 22may06):
+ % @macro funindex {WORD}
+ % @findex xyz
+ % @end macro
+ % ...
+ % @funindex commtest
+ %
+ % The above is not enough to reproduce the bug, but it gives the flavor.
+ %
+ % Sample whatsit resulting:
+ % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+ %
+ % So:
+ \let\endinput = \empty
+ %
+ % Do the redefinitions.
+ \commondummies
+}
+
+% For the aux and toc files, @ is the escape character. So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files). When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+ \def\@{@@}%
+ \def\ {@ }%
+ \let\{ = \lbraceatcmd
+ \let\} = \rbraceatcmd
+ %
+ % Do the redefinitions.
+ \commondummies
+ \otherbackslash
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+ %
+ % \definedummyword defines \#1 as \string\#1\space, thus effectively
+ % preventing its expansion. This is used only for control% words,
+ % not control letters, because the \space would be incorrect for
+ % control characters, but is needed to separate the control word
+ % from whatever follows.
+ %
+ % For control letters, we have \definedummyletter, which omits the
+ % space.
+ %
+ % These can be used both for control words that take an argument and
+ % those that do not. If it is followed by {arg} in the input, then
+ % that will dutifully get written to the index (or wherever).
+ %
+ \def\definedummyword ##1{\def##1{\string##1\space}}%
+ \def\definedummyletter##1{\def##1{\string##1}}%
+ \let\definedummyaccent\definedummyletter
+ %
+ \commondummiesnofonts
+ %
+ \definedummyletter\_%
+ %
+ % Non-English letters.
+ \definedummyword\AA
+ \definedummyword\AE
+ \definedummyword\L
+ \definedummyword\OE
+ \definedummyword\O
+ \definedummyword\aa
+ \definedummyword\ae
+ \definedummyword\l
+ \definedummyword\oe
+ \definedummyword\o
+ \definedummyword\ss
+ \definedummyword\exclamdown
+ \definedummyword\questiondown
+ \definedummyword\ordf
+ \definedummyword\ordm
+ %
+ % Although these internal commands shouldn't show up, sometimes they do.
+ \definedummyword\bf
+ \definedummyword\gtr
+ \definedummyword\hat
+ \definedummyword\less
+ \definedummyword\sf
+ \definedummyword\sl
+ \definedummyword\tclose
+ \definedummyword\tt
+ %
+ \definedummyword\LaTeX
+ \definedummyword\TeX
+ %
+ % Assorted special characters.
+ \definedummyword\bullet
+ \definedummyword\comma
+ \definedummyword\copyright
+ \definedummyword\registeredsymbol
+ \definedummyword\dots
+ \definedummyword\enddots
+ \definedummyword\equiv
+ \definedummyword\error
+ \definedummyword\euro
+ \definedummyword\expansion
+ \definedummyword\minus
+ \definedummyword\pounds
+ \definedummyword\point
+ \definedummyword\print
+ \definedummyword\result
+ \definedummyword\textdegree
+ %
+ % We want to disable all macros so that they are not expanded by \write.
+ \macrolist
+ %
+ \normalturnoffactive
+ %
+ % Handle some cases of @value -- where it does not contain any
+ % (non-fully-expandable) commands.
+ \makevalueexpandable
+}
+
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+%
+\def\commondummiesnofonts{%
+ % Control letters and accents.
+ \definedummyletter\!%
+ \definedummyaccent\"%
+ \definedummyaccent\'%
+ \definedummyletter\*%
+ \definedummyaccent\,%
+ \definedummyletter\.%
+ \definedummyletter\/%
+ \definedummyletter\:%
+ \definedummyaccent\=%
+ \definedummyletter\?%
+ \definedummyaccent\^%
+ \definedummyaccent\`%
+ \definedummyaccent\~%
+ \definedummyword\u
+ \definedummyword\v
+ \definedummyword\H
+ \definedummyword\dotaccent
+ \definedummyword\ringaccent
+ \definedummyword\tieaccent
+ \definedummyword\ubaraccent
+ \definedummyword\udotaccent
+ \definedummyword\dotless
+ %
+ % Texinfo font commands.
+ \definedummyword\b
+ \definedummyword\i
+ \definedummyword\r
+ \definedummyword\sc
+ \definedummyword\t
+ %
+ % Commands that take arguments.
+ \definedummyword\acronym
+ \definedummyword\cite
+ \definedummyword\code
+ \definedummyword\command
+ \definedummyword\dfn
+ \definedummyword\emph
+ \definedummyword\env
+ \definedummyword\file
+ \definedummyword\kbd
+ \definedummyword\key
+ \definedummyword\math
+ \definedummyword\option
+ \definedummyword\pxref
+ \definedummyword\ref
+ \definedummyword\samp
+ \definedummyword\strong
+ \definedummyword\tie
+ \definedummyword\uref
+ \definedummyword\url
+ \definedummyword\var
+ \definedummyword\verb
+ \definedummyword\w
+ \definedummyword\xref
+}
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names. It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+ % Accent commands should become @asis.
+ \def\definedummyaccent##1{\let##1\asis}%
+ % We can just ignore other control letters.
+ \def\definedummyletter##1{\let##1\empty}%
+ % Hopefully, all control words can become @asis.
+ \let\definedummyword\definedummyaccent
+ %
+ \commondummiesnofonts
+ %
+ % Don't no-op \tt, since it isn't a user-level command
+ % and is used in the definitions of the active chars like <, >, |, etc.
+ % Likewise with the other plain tex font commands.
+ %\let\tt=\asis
+ %
+ \def\ { }%
+ \def\@{@}%
+ % how to handle braces?
+ \def\_{\normalunderscore}%
+ %
+ % Non-English letters.
+ \def\AA{AA}%
+ \def\AE{AE}%
+ \def\L{L}%
+ \def\OE{OE}%
+ \def\O{O}%
+ \def\aa{aa}%
+ \def\ae{ae}%
+ \def\l{l}%
+ \def\oe{oe}%
+ \def\o{o}%
+ \def\ss{ss}%
+ \def\exclamdown{!}%
+ \def\questiondown{?}%
+ \def\ordf{a}%
+ \def\ordm{o}%
+ %
+ \def\LaTeX{LaTeX}%
+ \def\TeX{TeX}%
+ %
+ % Assorted special characters.
+ % (The following {} will end up in the sort string, but that's ok.)
+ \def\bullet{bullet}%
+ \def\comma{,}%
+ \def\copyright{copyright}%
+ \def\registeredsymbol{R}%
+ \def\dots{...}%
+ \def\enddots{...}%
+ \def\equiv{==}%
+ \def\error{error}%
+ \def\euro{euro}%
+ \def\expansion{==>}%
+ \def\minus{-}%
+ \def\pounds{pounds}%
+ \def\point{.}%
+ \def\print{-|}%
+ \def\result{=>}%
+ \def\textdegree{degrees}%
+ %
+ % We need to get rid of all macros, leaving only the arguments (if present).
+ % Of course this is not nearly correct, but it is the best we can do for now.
+ % makeinfo does not expand macros in the argument to @deffn, which ends up
+ % writing an index entry, and texindex isn't prepared for an index sort entry
+ % that starts with \.
+ %
+ % Since macro invocations are followed by braces, we can just redefine them
+ % to take a single TeX argument. The case of a macro invocation that
+ % goes to end-of-line is not handled.
+ %
+ \macrolist
+}
+
+\let\indexbackslash=0 %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+ \iflinks
+ {%
+ % Store the main index entry text (including the third arg).
+ \toks0 = {#2}%
+ % If third arg is present, precede it with a space.
+ \def\thirdarg{#3}%
+ \ifx\thirdarg\empty \else
+ \toks0 = \expandafter{\the\toks0 \space #3}%
+ \fi
+ %
+ \edef\writeto{\csname#1indfile\endcsname}%
+ %
+ \ifvmode
+ \dosubindsanitize
+ \else
+ \dosubindwrite
+ \fi
+ }%
+ \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
+ % Put the index entry in the margin if desired.
+ \ifx\SETmarginindex\relax\else
+ \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+ \fi
+ %
+ % Remember, we are within a group.
+ \indexdummies % Must do this here, since \bf, etc expand at this stage
+ \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+ % so it will be output as is; and it will print as backslash.
+ %
+ % Process the index entry with all font commands turned off, to
+ % get the string to sort by.
+ {\indexnofonts
+ \edef\temp{\the\toks0}% need full expansion
+ \xdef\indexsorttmp{\temp}%
+ }%
+ %
+ % Set up the complete index entry, with both the sort key and
+ % the original text, including any font commands. We write
+ % three arguments to \entry to the .?? file (four in the
+ % subentry case), texindex reduces to two when writing the .??s
+ % sorted result.
+ \edef\temp{%
+ \write\writeto{%
+ \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+ }%
+ \temp
+}
+
+% Take care of unwanted page breaks:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again. Otherwise, the whatsit generated by the
+% \write will make \lastskip zero. The result is that sequences
+% like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode. We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip. \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip. The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+% ..., ready, GO:
+%
+\def\dosubindsanitize{%
+ % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+ \skip0 = \lastskip
+ \edef\lastskipmacro{\the\lastskip}%
+ \count255 = \lastpenalty
+ %
+ % If \lastskip is nonzero, that means the last item was a
+ % skip. And since a skip is discardable, that means this
+ % -\skip0 glue we're inserting is preceded by a
+ % non-discardable item, therefore it is not a potential
+ % breakpoint, therefore no \nobreak needed.
+ \ifx\lastskipmacro\zeroskipmacro
+ \else
+ \vskip-\skip0
+ \fi
+ %
+ \dosubindwrite
+ %
+ \ifx\lastskipmacro\zeroskipmacro
+ % If \lastskip was zero, perhaps the last item was a penalty, and
+ % perhaps it was >=10000, e.g., a \nobreak. In that case, we want
+ % to re-insert the same penalty (values >10000 are used for various
+ % signals); since we just inserted a non-discardable item, any
+ % following glue (such as a \parskip) would be a breakpoint. For example:
+ %
+ % @deffn deffn-whatever
+ % @vindex index-whatever
+ % Description.
+ % would allow a break between the index-whatever whatsit
+ % and the "Description." paragraph.
+ \ifnum\count255>9999 \penalty\count255 \fi
+ \else
+ % On the other hand, if we had a nonzero \lastskip,
+ % this make-up glue would be preceded by a non-discardable item
+ % (the whatsit from the \write), so we must insert a \nobreak.
+ \nobreak\vskip\skip0
+ \fi
+}
+
+% The index entry written in the file actually looks like
+% \entry {sortstring}{page}{topic}
+% or
+% \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+% \initial {c}
+% before the first topic whose initial is c
+% \entry {topic}{pagelist}
+% for a topic that is used without subtopics
+% \primary {topic}
+% for the beginning of a topic that is used with subtopics
+% \secondary {subtopic}{pagelist}
+% for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+ \dobreak \chapheadingskip{10000}%
+ %
+ \smallfonts \rm
+ \tolerance = 9500
+ \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+ %
+ % See if the index file exists and is nonempty.
+ % Change catcode of @ here so that if the index file contains
+ % \initial {@}
+ % as its first line, TeX doesn't complain about mismatched braces
+ % (because it thinks @} is a control sequence).
+ \catcode`\@ = 11
+ \openin 1 \jobname.#1s
+ \ifeof 1
+ % \enddoublecolumns gets confused if there is no text in the index,
+ % and it loses the chapter title and the aux file entries for the
+ % index. The easiest way to prevent this problem is to make sure
+ % there is some text.
+ \putwordIndexNonexistent
+ \else
+ %
+ % If the index file exists but is empty, then \openin leaves \ifeof
+ % false. We have to make TeX try to read something from the file, so
+ % it can discover if there is anything in it.
+ \read 1 to \temp
+ \ifeof 1
+ \putwordIndexIsEmpty
+ \else
+ % Index files are almost Texinfo source, but we use \ as the escape
+ % character. It would be better to use @, but that's too big a change
+ % to make right now.
+ \def\indexbackslash{\backslashcurfont}%
+ \catcode`\\ = 0
+ \escapechar = `\\
+ \begindoublecolumns
+ \input \jobname.#1s
+ \enddoublecolumns
+ \fi
+ \fi
+ \closein 1
+\endgroup}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+\def\initial#1{{%
+ % Some minor font changes for the special characters.
+ \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+ %
+ % Remove any glue we may have, we'll be inserting our own.
+ \removelastskip
+ %
+ % We like breaks before the index initials, so insert a bonus.
+ \nobreak
+ \vskip 0pt plus 3\baselineskip
+ \penalty 0
+ \vskip 0pt plus -3\baselineskip
+ %
+ % Typeset the initial. Making this add up to a whole number of
+ % baselineskips increases the chance of the dots lining up from column
+ % to column. It still won't often be perfect, because of the stretch
+ % we need before each entry, but it's better.
+ %
+ % No shrink because it confuses \balancecolumns.
+ \vskip 1.67\baselineskip plus .5\baselineskip
+ \leftline{\secbf #1}%
+ % Do our best not to break after the initial.
+ \nobreak
+ \vskip .33\baselineskip plus .1\baselineskip
+}}
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin. It is used for index
+% and table of contents entries. The paragraph is indented by \leftskip.
+%
+% A straightforward implementation would start like this:
+% \def\entry#1#2{...
+% But this frozes the catcodes in the argument, and can cause problems to
+% @code, which sets - active. This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't really right.
+%
+% The right solution is to prevent \entry from swallowing the whole text.
+% --kasal, 21nov03
+\def\entry{%
+ \begingroup
+ %
+ % Start a new paragraph if necessary, so our assignments below can't
+ % affect previous text.
+ \par
+ %
+ % Do not fill out the last line with white space.
+ \parfillskip = 0in
+ %
+ % No extra space above this paragraph.
+ \parskip = 0in
+ %
+ % Do not prefer a separate line ending with a hyphen to fewer lines.
+ \finalhyphendemerits = 0
+ %
+ % \hangindent is only relevant when the entry text and page number
+ % don't both fit on one line. In that case, bob suggests starting the
+ % dots pretty far over on the line. Unfortunately, a large
+ % indentation looks wrong when the entry text itself is broken across
+ % lines. So we use a small indentation and put up with long leaders.
+ %
+ % \hangafter is reset to 1 (which is the value we want) at the start
+ % of each paragraph, so we need not do anything with that.
+ \hangindent = 2em
+ %
+ % When the entry text needs to be broken, just fill out the first line
+ % with blank space.
+ \rightskip = 0pt plus1fil
+ %
+ % A bit of stretch before each entry for the benefit of balancing
+ % columns.
+ \vskip 0pt plus1pt
+ %
+ % Swallow the left brace of the text (first parameter):
+ \afterassignment\doentry
+ \let\temp =
+}
+\def\doentry{%
+ \bgroup % Instead of the swallowed brace.
+ \noindent
+ \aftergroup\finishentry
+ % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+ % #1 is the page number.
+ %
+ % The following is kludged to not output a line of dots in the index if
+ % there are no page numbers. The next person who breaks this will be
+ % cursed by a Unix daemon.
+ \def\tempa{{\rm }}%
+ \def\tempb{#1}%
+ \edef\tempc{\tempa}%
+ \edef\tempd{\tempb}%
+ \ifx\tempc\tempd
+ \ %
+ \else
+ %
+ % If we must, put the page number on a line of its own, and fill out
+ % this line with blank space. (The \hfil is overwhelmed with the
+ % fill leaders glue in \indexdotfill if the page number does fit.)
+ \hfil\penalty50
+ \null\nobreak\indexdotfill % Have leaders before the page number.
+ %
+ % The `\ ' here is removed by the implicit \unskip that TeX does as
+ % part of (the primitive) \par. Without it, a spurious underfull
+ % \hbox ensues.
+ \ifpdf
+ \pdfgettoks#1.%
+ \ \the\toksA
+ \else
+ \ #1%
+ \fi
+ \fi
+ \par
+ \endgroup
+}
+
+% Like plain.tex's \dotfill, except uses up at least 1 em.
+\def\indexdotfill{\cleaders
+ \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+ \parfillskip=0in
+ \parskip=0in
+ \hangindent=1in
+ \hangafter=1
+ \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+ \ifpdf
+ \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+ \else
+ #2
+ \fi
+ \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+ % Grab any single-column material above us.
+ \output = {%
+ %
+ % Here is a possibility not foreseen in manmac: if we accumulate a
+ % whole lot of material, we might end up calling this \output
+ % routine twice in a row (see the doublecol-lose test, which is
+ % essentially a couple of indexes with @setchapternewpage off). In
+ % that case we just ship out what is in \partialpage with the normal
+ % output routine. Generally, \partialpage will be empty when this
+ % runs and this will be a no-op. See the indexspread.tex test case.
+ \ifvoid\partialpage \else
+ \onepageout{\pagecontents\partialpage}%
+ \fi
+ %
+ \global\setbox\partialpage = \vbox{%
+ % Unvbox the main output page.
+ \unvbox\PAGE
+ \kern-\topskip \kern\baselineskip
+ }%
+ }%
+ \eject % run that output routine to set \partialpage
+ %
+ % Use the double-column output routine for subsequent pages.
+ \output = {\doublecolumnout}%
+ %
+ % Change the page size parameters. We could do this once outside this
+ % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+ % format, but then we repeat the same computation. Repeating a couple
+ % of assignments once per index is clearly meaningless for the
+ % execution time, so we may as well do it in one place.
+ %
+ % First we halve the line length, less a little for the gutter between
+ % the columns. We compute the gutter based on the line length, so it
+ % changes automatically with the paper format. The magic constant
+ % below is chosen so that the gutter has the same value (well, +-<1pt)
+ % as it did when we hard-coded it.
+ %
+ % We put the result in a separate register, \doublecolumhsize, so we
+ % can restore it in \pagesofar, after \hsize itself has (potentially)
+ % been clobbered.
+ %
+ \doublecolumnhsize = \hsize
+ \advance\doublecolumnhsize by -.04154\hsize
+ \divide\doublecolumnhsize by 2
+ \hsize = \doublecolumnhsize
+ %
+ % Double the \vsize as well. (We don't need a separate register here,
+ % since nobody clobbers \vsize.)
+ \vsize = 2\vsize
+}
+
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+ \splittopskip=\topskip \splitmaxdepth=\maxdepth
+ % Get the available space for the double columns -- the normal
+ % (undoubled) page height minus any material left over from the
+ % previous page.
+ \dimen@ = \vsize
+ \divide\dimen@ by 2
+ \advance\dimen@ by -\ht\partialpage
+ %
+ % box0 will be the left-hand column, box2 the right.
+ \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+ \onepageout\pagesofar
+ \unvbox255
+ \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+ \unvbox\partialpage
+ %
+ \hsize = \doublecolumnhsize
+ \wd0=\hsize \wd2=\hsize
+ \hbox to\pagewidth{\box0\hfil\box2}%
+}
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+ \output = {%
+ % Split the last of the double-column material. Leave it on the
+ % current page, no automatic page break.
+ \balancecolumns
+ %
+ % If we end up splitting too much material for the current page,
+ % though, there will be another page break right after this \output
+ % invocation ends. Having called \balancecolumns once, we do not
+ % want to call it again. Therefore, reset \output to its normal
+ % definition right away. (We hope \balancecolumns will never be
+ % called on to balance too much material, but if it is, this makes
+ % the output somewhat more palatable.)
+ \global\output = {\onepageout{\pagecontents\PAGE}}%
+ }%
+ \eject
+ \endgroup % started in \begindoublecolumns
+ %
+ % \pagegoal was set to the doubled \vsize above, since we restarted
+ % the current page. We're now back to normal single-column
+ % typesetting, so reset \pagegoal to the normal \vsize (after the
+ % \endgroup where \vsize got restored).
+ \pagegoal = \vsize
+}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+ \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+ \dimen@ = \ht0
+ \advance\dimen@ by \topskip
+ \advance\dimen@ by-\baselineskip
+ \divide\dimen@ by 2 % target to split to
+ %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+ \splittopskip = \topskip
+ % Loop until we get a decent breakpoint.
+ {%
+ \vbadness = 10000
+ \loop
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@
+ \ifdim\ht3>\dimen@
+ \global\advance\dimen@ by 1pt
+ \repeat
+ }%
+ %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ %
+ \pagesofar
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% \unnumberedno is an oxymoron, of course. But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number". We avoid collisions with chapter
+% numbers by starting them at 10000. (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno \secno=0
+\newcount\subsecno \subsecno=0
+\newcount\subsubsecno \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+ \ifnum\appendixno=`A A%
+ \else\ifnum\appendixno=`B B%
+ \else\ifnum\appendixno=`C C%
+ \else\ifnum\appendixno=`D D%
+ \else\ifnum\appendixno=`E E%
+ \else\ifnum\appendixno=`F F%
+ \else\ifnum\appendixno=`G G%
+ \else\ifnum\appendixno=`H H%
+ \else\ifnum\appendixno=`I I%
+ \else\ifnum\appendixno=`J J%
+ \else\ifnum\appendixno=`K K%
+ \else\ifnum\appendixno=`L L%
+ \else\ifnum\appendixno=`M M%
+ \else\ifnum\appendixno=`N N%
+ \else\ifnum\appendixno=`O O%
+ \else\ifnum\appendixno=`P P%
+ \else\ifnum\appendixno=`Q Q%
+ \else\ifnum\appendixno=`R R%
+ \else\ifnum\appendixno=`S S%
+ \else\ifnum\appendixno=`T T%
+ \else\ifnum\appendixno=`U U%
+ \else\ifnum\appendixno=`V V%
+ \else\ifnum\appendixno=`W W%
+ \else\ifnum\appendixno=`X X%
+ \else\ifnum\appendixno=`Y Y%
+ \else\ifnum\appendixno=`Z Z%
+ % The \the is necessary, despite appearances, because \appendixletter is
+ % expanded while writing the .toc file. \char\appendixno is not
+ % expandable, thus it is written literally, thus all appendixes come out
+ % with the same letter (or @) in the toc without it.
+ \else\char\the\appendixno
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines this as the name of the chapter.
+% page headings and footings can use it. @section does likewise.
+% However, they are not reliable, because we don't use marks.
+\def\thischapter{}
+\def\thissection{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achive this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unmlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+ % Compute the abs. sec. level:
+ \absseclevel=#2
+ \advance\absseclevel by \secbase
+ % Make sure \absseclevel doesn't fall outside the range:
+ \ifnum \absseclevel < 0
+ \absseclevel = 0
+ \else
+ \ifnum \absseclevel > 3
+ \absseclevel = 3
+ \fi
+ \fi
+ % The heading type:
+ \def\headtype{#1}%
+ \if \headtype U%
+ \ifnum \absseclevel < \unmlevel
+ \chardef\unmlevel = \absseclevel
+ \fi
+ \else
+ % Check for appendix sections:
+ \ifnum \absseclevel = 0
+ \edef\chapheadtype{\headtype}%
+ \else
+ \if \headtype A\if \chapheadtype N%
+ \errmessage{@appendix... within a non-appendix chapter}%
+ \fi\fi
+ \fi
+ % Check for numbered within unnumbered:
+ \ifnum \absseclevel > \unmlevel
+ \def\headtype{U}%
+ \else
+ \chardef\unmlevel = 3
+ \fi
+ \fi
+ % Now print the heading:
+ \if \headtype U%
+ \ifcase\absseclevel
+ \unnumberedzzz{#3}%
+ \or \unnumberedseczzz{#3}%
+ \or \unnumberedsubseczzz{#3}%
+ \or \unnumberedsubsubseczzz{#3}%
+ \fi
+ \else
+ \if \headtype A%
+ \ifcase\absseclevel
+ \appendixzzz{#3}%
+ \or \appendixsectionzzz{#3}%
+ \or \appendixsubseczzz{#3}%
+ \or \appendixsubsubseczzz{#3}%
+ \fi
+ \else
+ \ifcase\absseclevel
+ \chapterzzz{#3}%
+ \or \seczzz{#3}%
+ \or \numberedsubseczzz{#3}%
+ \or \numberedsubsubseczzz{#3}%
+ \fi
+ \fi
+ \fi
+ \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v. By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+ % section resetting is \global in case the chapter is in a group, such
+ % as an @include file.
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\chapno by 1
+ %
+ % Used for \float.
+ \gdef\chaplevelprefix{\the\chapno.}%
+ \resetallfloatnos
+ %
+ \message{\putwordChapter\space \the\chapno}%
+ %
+ % Write the actual heading.
+ \chapmacro{#1}{Ynumbered}{\the\chapno}%
+ %
+ % So @section and the like are numbered underneath this chapter.
+ \global\let\section = \numberedsec
+ \global\let\subsection = \numberedsubsec
+ \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\def\appendixzzz#1{%
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\appendixno by 1
+ \gdef\chaplevelprefix{\appendixletter.}%
+ \resetallfloatnos
+ %
+ \def\appendixnum{\putwordAppendix\space \appendixletter}%
+ \message{\appendixnum}%
+ %
+ \chapmacro{#1}{Yappendix}{\appendixletter}%
+ %
+ \global\let\section = \appendixsec
+ \global\let\subsection = \appendixsubsec
+ \global\let\subsubsection = \appendixsubsubsec
+}
+
+\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+\def\unnumberedzzz#1{%
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\unnumberedno by 1
+ %
+ % Since an unnumbered has no number, no prefix for figures.
+ \global\let\chaplevelprefix = \empty
+ \resetallfloatnos
+ %
+ % This used to be simply \message{#1}, but TeX fully expands the
+ % argument to \message. Therefore, if #1 contained @-commands, TeX
+ % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
+ % expanded @cite (which turns out to cause errors because \cite is meant
+ % to be executed, not expanded).
+ %
+ % Anyway, we don't want the fully-expanded definition of @cite to appear
+ % as a result of the \message, we just want `@cite' itself. We use
+ % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+ % simply yielding the contents of <toks register>. (We also do this for
+ % the toc entries.)
+ \toks0 = {#1}%
+ \message{(\the\toks0)}%
+ %
+ \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+ %
+ \global\let\section = \unnumberedsec
+ \global\let\subsection = \unnumberedsubsec
+ \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+ % Well, we could do the following in a group, but that would break
+ % an assumption that \chapmacro is called at the outermost level.
+ % Thus we are safer this way: --kasal, 24feb04
+ \let\centerparametersmaybe = \centerparameters
+ \unnmhead0{#1}%
+ \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+\def\appendixsectionzzz#1{%
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\def\unnumberedseczzz#1{%
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz#1{%
+ \global\subsubsecno=0 \global\advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+\def\appendixsubseczzz#1{%
+ \global\subsubsecno=0 \global\advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Yappendix}%
+ {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\def\unnumberedsubseczzz#1{%
+ \global\subsubsecno=0 \global\advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Ynothing}%
+ {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz#1{%
+ \global\advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Ynumbered}%
+ {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+\def\appendixsubsubseczzz#1{%
+ \global\advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Yappendix}%
+ {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\def\unnumberedsubsubseczzz#1{%
+ \global\advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Ynothing}%
+ {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+% NOTE on use of \vbox for chapter headings, section headings, and such:
+% 1) We use \vbox rather than the earlier \line to permit
+% overlong headings to fold.
+% 2) \hyphenpenalty is set to 10000 because hyphenation in a
+% heading is obnoxious; this forbids it.
+% 3) Likewise, headings look best if no \parindent is used, and
+% if justification is not attempted. Hence \raggedright.
+
+
+\def\majorheading{%
+ {\advance\chapheadingskip by 10pt \chapbreak }%
+ \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+ {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}%
+ \bigskip \par\penalty 200\relax
+ \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+%%% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+%%% Define plain chapter starts, and page on/off switching for it
+% Parameter controlling skip before chapter headings (if needed)
+
+\newskip\chapheadingskip
+
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+\def\chappager{\par\vfill\supereject}
+\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
+
+\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chapmacro#1#2#3{%
+ \pchapsepmacro
+ {%
+ \chapfonts \rm
+ %
+ % Have to define \thissection before calling \donoderef, because the
+ % xref code eventually uses it. On the other hand, it has to be called
+ % after \pchapsepmacro, or the headline will change too soon.
+ \gdef\thissection{#1}%
+ \gdef\thischaptername{#1}%
+ %
+ % Only insert the separating space if we have a chapter/appendix
+ % number, and don't print the unnumbered ``number''.
+ \def\temptype{#2}%
+ \ifx\temptype\Ynothingkeyword
+ \setbox0 = \hbox{}%
+ \def\toctype{unnchap}%
+ \gdef\thischapternum{}%
+ \gdef\thischapter{#1}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+ \def\toctype{omit}%
+ \gdef\thischapternum{}%
+ \gdef\thischapter{}%
+ \else\ifx\temptype\Yappendixkeyword
+ \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+ \def\toctype{app}%
+ \xdef\thischapternum{\appendixletter}%
+ % We don't substitute the actual chapter name into \thischapter
+ % because we don't want its macros evaluated now. And we don't
+ % use \thissection because that changes with each section.
+ %
+ \xdef\thischapter{\putwordAppendix{} \appendixletter:
+ \noexpand\thischaptername}%
+ \else
+ \setbox0 = \hbox{#3\enspace}%
+ \def\toctype{numchap}%
+ \xdef\thischapternum{\the\chapno}%
+ \xdef\thischapter{\putwordChapter{} \the\chapno:
+ \noexpand\thischaptername}%
+ \fi\fi\fi
+ %
+ % Write the toc entry for this chapter. Must come before the
+ % \donoderef, because we include the current node name in the toc
+ % entry, and \donoderef resets it to empty.
+ \writetocentry{\toctype}{#1}{#3}%
+ %
+ % For pdftex, we have to write out the node definition (aka, make
+ % the pdfdest) after any page break, but before the actual text has
+ % been typeset. If the destination for the pdf outline is after the
+ % text, then jumping from the outline may wind up with the text not
+ % being visible, for instance under high magnification.
+ \donoderef{#2}%
+ %
+ % Typeset the actual heading.
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent=\wd0 \centerparametersmaybe
+ \unhbox0 #1\par}%
+ }%
+ \nobreak\bigskip % no page break after a chapter title
+ \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}\bigskip \par\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt
+ \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+}
+\def\CHAPFopen{%
+ \global\let\chapmacro=\chfopen
+ \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles. These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\sectionheading#1#2#3#4{%
+ {%
+ % Switch to the right set of fonts.
+ \csname #2fonts\endcsname \rm
+ %
+ % Insert space above the heading.
+ \csname #2headingbreak\endcsname
+ %
+ % Only insert the space after the number if we have a section number.
+ \def\sectionlevel{#2}%
+ \def\temptype{#3}%
+ %
+ \ifx\temptype\Ynothingkeyword
+ \setbox0 = \hbox{}%
+ \def\toctype{unn}%
+ \gdef\thissection{#1}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ % for @headings -- no section number, don't include in toc,
+ % and don't redefine \thissection.
+ \setbox0 = \hbox{}%
+ \def\toctype{omit}%
+ \let\sectionlevel=\empty
+ \else\ifx\temptype\Yappendixkeyword
+ \setbox0 = \hbox{#4\enspace}%
+ \def\toctype{app}%
+ \gdef\thissection{#1}%
+ \else
+ \setbox0 = \hbox{#4\enspace}%
+ \def\toctype{num}%
+ \gdef\thissection{#1}%
+ \fi\fi\fi
+ %
+ % Write the toc entry (before \donoderef). See comments in \chapmacro.
+ \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+ %
+ % Write the node reference (= pdf destination for pdftex).
+ % Again, see comments in \chapmacro.
+ \donoderef{#3}%
+ %
+ % Interline glue will be inserted when the vbox is completed.
+ % That glue will be a valid breakpoint for the page, since it'll be
+ % preceded by a whatsit (usually from the \donoderef, or from the
+ % \writetocentry if there was no node). We don't want to allow that
+ % break, since then the whatsits could end up on page n while the
+ % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000.
+ \nobreak
+ %
+ % Output the actual section heading.
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent=\wd0 % zero if no section number
+ \unhbox0 #1}%
+ }%
+ % Add extra space after the heading -- half of whatever came above it.
+ % Don't allow stretch, though.
+ \kern .5 \csname #2headingskip\endcsname
+ %
+ % Do not let the kern be a potential breakpoint, as it would be if it
+ % was followed by glue.
+ \nobreak
+ %
+ % We'll almost certainly start a paragraph next, so don't let that
+ % glue accumulate. (Not a breakpoint because it's preceded by a
+ % discardable item.)
+ \vskip-\parskip
+ %
+ % This is purely so the last item on the list is a known \penalty >
+ % 10000. This is so \startdefun can avoid allowing breakpoints after
+ % section headings. Otherwise, it would insert a valid breakpoint between:
+ %
+ % @section sec-whatever
+ % @deffn def-whatever
+ \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this. The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything. This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+ \edef\writetoctype{#1}%
+ \ifx\writetoctype\omitkeyword \else
+ \iftocfileopened\else
+ \immediate\openout\tocfile = \jobname.toc
+ \global\tocfileopenedtrue
+ \fi
+ %
+ \iflinks
+ {\atdummies
+ \edef\temp{%
+ \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+ \temp
+ }%
+ \fi
+ \fi
+ %
+ % Tell \shipout to create a pdf destination on each page, if we're
+ % writing pdf. These are used in the table of contents. We can't
+ % just write one on every page because the title pages are numbered
+ % 1 and 2 (the page numbers aren't printed), and so are the first
+ % two pages of the document. Thus, we'd have two destinations named
+ % `1', and two named `2'.
+ \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care. This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+ \catcode`\"=\active
+ \catcode`\$=\active
+ \catcode`\<=\active
+ \catcode`\>=\active
+ \catcode`\\=\active
+ \catcode`\^=\active
+ \catcode`\_=\active
+ \catcode`\|=\active
+ \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+ \setupdatafile
+ \activecatcodes
+ \input \jobname.toc
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+ % If @setchapternewpage on, and @headings double, the contents should
+ % start on an odd page, unlike chapters. Thus, we maintain
+ % \contentsalignmacro in parallel with \pagealignmacro.
+ % From: Torbjorn Granlund <tege@matematik.su.se>
+ \contentsalignmacro
+ \immediate\closeout\tocfile
+ %
+ % Don't need to put `Contents' or `Short Contents' in the headline.
+ % It is abundantly clear what they are.
+ \def\thischapter{}%
+ \chapmacro{#1}{Yomitfromtoc}{}%
+ %
+ \savepageno = \pageno
+ \begingroup % Set up to handle contents files properly.
+ \raggedbottom % Worry more about breakpoints than the bottom.
+ \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+ %
+ % Roman numerals for page numbers.
+ \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+
+% Normal (long) toc.
+\def\contents{%
+ \startcontents{\putwordTOC}%
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \readtocfile
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \ifeof 1 \else
+ \pdfmakeoutlines
+ \fi
+ \closein 1
+ \endgroup
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+ \startcontents{\putwordShortTOC}%
+ %
+ \let\numchapentry = \shortchapentry
+ \let\appentry = \shortchapentry
+ \let\unnchapentry = \shortunnchapentry
+ % We want a true roman here for the page numbers.
+ \secfonts
+ \let\rm=\shortcontrm \let\bf=\shortcontbf
+ \let\sl=\shortcontsl \let\tt=\shortconttt
+ \rm
+ \hyphenpenalty = 10000
+ \advance\baselineskip by 1pt % Open it up a little.
+ \def\numsecentry##1##2##3##4{}
+ \let\appsecentry = \numsecentry
+ \let\unnsecentry = \numsecentry
+ \let\numsubsecentry = \numsecentry
+ \let\appsubsecentry = \numsecentry
+ \let\unnsubsecentry = \numsecentry
+ \let\numsubsubsecentry = \numsecentry
+ \let\appsubsubsecentry = \numsecentry
+ \let\unnsubsubsecentry = \numsecentry
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \readtocfile
+ \fi
+ \closein 1
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \endgroup
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+ % This space should be enough, since a single number is .5em, and the
+ % widest letter (M) is 1em, at least in the Computer Modern fonts.
+ % But use \hss just in case.
+ % (This space doesn't include the extra space that gets added after
+ % the label; that gets put in by \shortchapentry above.)
+ %
+ % We'd like to right-justify chapter numbers, but that looks strange
+ % with appendix letters. And right-justifying numbers and
+ % left-justifying letters looks strange when there is less than 10
+ % chapters. Have to read the whole toc once to know how many chapters
+ % there are before deciding ...
+ \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+ \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+ % We use M since it's probably the widest letter.
+ \setbox0 = \hbox{\putwordAppendix{} M}%
+ \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+ \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+ \begingroup
+ \chapentryfonts
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+ \endgroup
+ \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+ \secentryfonts \leftskip=\tocindent
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+ \subsecentryfonts \leftskip=2\tocindent
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+ \subsubsecentryfonts \leftskip=3\tocindent
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, it should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+ \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+ \advance\hsize by -2\dimen2 % Rules.
+ \vbox{%
+ \hrule height\dimen2
+ \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
+ \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+ \kern3pt\vrule width\dimen2}% Space to right.
+ \hrule height\dimen2}
+ \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @tex ... @end tex escapes into raw Tex temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain tex @ character.
+
+\envdef\tex{%
+ \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+ \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+ \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+ \catcode `\%=14
+ \catcode `\+=\other
+ \catcode `\"=\other
+ \catcode `\|=\other
+ \catcode `\<=\other
+ \catcode `\>=\other
+ \escapechar=`\\
+ %
+ \let\b=\ptexb
+ \let\bullet=\ptexbullet
+ \let\c=\ptexc
+ \let\,=\ptexcomma
+ \let\.=\ptexdot
+ \let\dots=\ptexdots
+ \let\equiv=\ptexequiv
+ \let\!=\ptexexclam
+ \let\i=\ptexi
+ \let\indent=\ptexindent
+ \let\noindent=\ptexnoindent
+ \let\{=\ptexlbrace
+ \let\+=\tabalign
+ \let\}=\ptexrbrace
+ \let\/=\ptexslash
+ \let\*=\ptexstar
+ \let\t=\ptext
+ \let\frenchspacing=\plainfrenchspacing
+ %
+ \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+ \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+ \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments. \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical. We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+ % =10000 instead of <10000 because of a special case in \itemzzz and
+ % \sectionheading, q.v.
+ \ifnum \lastpenalty=10000 \else
+ \advance\envskipamount by \parskip
+ \endgraf
+ \ifdim\lastskip<\envskipamount
+ \removelastskip
+ % it's not a good place to break if the last penalty was \nobreak
+ % or better ...
+ \ifnum\lastpenalty<10000 \penalty-50 \fi
+ \vskip\envskipamount
+ \fi
+ \fi
+}}
+
+\let\afterenvbreak = \aboveenvbreak
+
+% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+ \ctl\leaders\hrule height\circthick\hfil\ctr
+ \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+ \cbl\leaders\hrule height\circthick\hfil\cbr
+ \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+ \ifhmode\par\fi % can't be in the midst of a paragraph.
+ \startsavinginserts
+ \lskip=\leftskip \rskip=\rightskip
+ \leftskip=0pt\rightskip=0pt % we want these *outside*.
+ \cartinner=\hsize \advance\cartinner by-\lskip
+ \advance\cartinner by-\rskip
+ \cartouter=\hsize
+ \advance\cartouter by 18.4pt % allow for 3pt kerns on either
+ % side, and for 6pt waste from
+ % each corner char, and rule thickness
+ \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+ % Flag to tell @lisp, etc., not to narrow margin.
+ \let\nonarrowing = t%
+ \vbox\bgroup
+ \baselineskip=0pt\parskip=0pt\lineskip=0pt
+ \carttop
+ \hbox\bgroup
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \kern3pt
+ \hsize=\cartinner
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \vskip -\parskip
+ \comment % For explanation, see the end of \def\group.
+}
+\def\Ecartouche{%
+ \ifhmode\par\fi
+ \kern3pt
+ \egroup
+ \kern3pt\vrule
+ \hskip\rskip
+ \egroup
+ \cartbot
+ \egroup
+ \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\def\nonfillstart{%
+ \aboveenvbreak
+ \hfuzz = 12pt % Don't be fussy
+ \sepspaces % Make spaces be word-separators rather than space tokens.
+ \let\par = \lisppar % don't ignore blank lines
+ \obeylines % each line of input is a line of output
+ \parskip = 0pt
+ \parindent = 0pt
+ \emergencystretch = 0pt % don't try to avoid overfull boxes
+ \ifx\nonarrowing\relax
+ \advance \leftskip by \lispnarrowing
+ \exdentamount=\lispnarrowing
+ \else
+ \let\nonarrowing = \relax
+ \fi
+ \let\exdent=\nofillexdent
+}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+% @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+ \ifx\SETdispenvsize\smallword
+ \smallexamplefonts \rm
+ \fi
+}
+\def\setsmalldispenv{%
+ \ifx\SETdispenvsize\nosmallword
+ \else
+ \smallexamplefonts \rm
+ \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it by one command:
+\def\makedispenv #1#2{
+ \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
+ \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
+ \expandafter\let\csname E#1\endcsname \afterenvbreak
+ \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two synonyms:
+\def\maketwodispenvs #1#2#3{
+ \makedispenv{#1}{#3}
+ \makedispenv{#2}{#3}
+}
+
+% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvs {lisp}{example}{%
+ \nonfillstart
+ \tt\quoteexpand
+ \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+ \gobble % eat return
+}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenv {display}{%
+ \nonfillstart
+ \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenv{format}{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ \advance\leftskip by 0pt plus 1fill
+ \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins. We keep \parskip nonzero in general, since
+% we're doing normal filling. So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\envdef\quotation{%
+ {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+ \parindent=0pt
+ %
+ % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+ \ifx\nonarrowing\relax
+ \advance\leftskip by \lispnarrowing
+ \advance\rightskip by \lispnarrowing
+ \exdentamount = \lispnarrowing
+ \else
+ \let\nonarrowing = \relax
+ \fi
+ \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+ \par
+ \ifx\quotationauthor\undefined\else
+ % indent a bit.
+ \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+ \fi
+ {\parskip=0pt \afterenvbreak}%
+}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+ \def\temp{#1}%
+ \ifx\temp\empty \else
+ {\bf #1: }%
+ \fi
+}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too. Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+ \do\ \do\\\do\{\do\}\do\$\do\&%
+ \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+ \do\<\do\>\do\|\do\@\do+\do\"%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+ \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% [Knuth] pp. 380,381,391
+% Disable Spanish ligatures ?` and !` of \tt font
+\begingroup
+ \catcode`\`=\active\gdef`{\relax\lq}
+\endgroup
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+ \catcode`\^^I=\active
+ \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+ \tt % easiest (and conventionally used) font for verbatim
+ \def\par{\leavevmode\endgraf}%
+ \catcode`\`=\active
+ \tabeightspaces
+ % Respect line breaks,
+ % print special symbols as themselves, and
+ % make each space count
+ % must do in this order:
+ \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+\def\starttabbox{\setbox0=\hbox\bgroup}
+
+% Allow an option to not replace quotes with a regular directed right
+% quote/apostrophe (char 0x27), but instead use the undirected quote
+% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it
+% the default, but it works for pasting with more pdf viewers (at least
+% evince), the lilypond developers report. xpdf does work with the
+% regular 0x27.
+%
+\def\codequoteright{%
+ \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+ '%
+ \else
+ \char'15
+ \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+ \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+ `%
+ \else
+ \char'22
+ \fi
+}
+%
+\begingroup
+ \catcode`\^^I=\active
+ \gdef\tabexpand{%
+ \catcode`\^^I=\active
+ \def^^I{\leavevmode\egroup
+ \dimen0=\wd0 % the width so far, or since the previous tab
+ \divide\dimen0 by\tabw
+ \multiply\dimen0 by\tabw % compute previous multiple of \tabw
+ \advance\dimen0 by\tabw % advance to next multiple of \tabw
+ \wd0=\dimen0 \box0 \starttabbox
+ }%
+ }
+ \catcode`\'=\active
+ \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}%
+ %
+ \catcode`\`=\active
+ \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}%
+ %
+ \gdef\quoteexpand{\rquoteexpand \lquoteexpand}%
+\endgroup
+
+% start the verbatim environment.
+\def\setupverbatim{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ % Easiest (and conventionally used) font for verbatim
+ \tt
+ \def\par{\leavevmode\egroup\box0\endgraf}%
+ \catcode`\`=\active
+ \tabexpand
+ \quoteexpand
+ % Respect line breaks,
+ % print special symbols as themselves, and
+ % make each space count
+ % must do in this order:
+ \obeylines \uncatcodespecials \sepspaces
+ \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters. Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+% \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+ \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+ \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+% \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+ \catcode`\ =\active
+ \obeylines %
+ % ignore everything up to the first ^^M, that's the newline at the end
+ % of the @verbatim input line itself. Otherwise we get an extra blank
+ % line in the output.
+ \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+ % We really want {...\end verbatim} in the body of the macro, but
+ % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+ \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+ {%
+ \makevalueexpandable
+ \setupverbatim
+ \input #1
+ \afterenvbreak
+ }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+ \begingroup
+ \parindent = 0pt % paragraph indentation looks wrong on title page
+ \scanexp\copyingtext
+ \endgroup
+}
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+
+% Start the processing of @deffn:
+\def\startdefun{%
+ \ifnum\lastpenalty<10000
+ \medbreak
+ \else
+ % If there are two @def commands in a row, we'll have a \nobreak,
+ % which is there to keep the function description together with its
+ % header. But if there's nothing but headers, we need to allow a
+ % break somewhere. Check specifically for penalty 10002, inserted
+ % by \defargscommonending, instead of 10000, since the sectioning
+ % commands also insert a nobreak penalty, and we don't want to allow
+ % a break between a section heading and a defun.
+ %
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
+ %
+ % Similarly, after a section heading, do not allow a break.
+ % But do insert the glue.
+ \medskip % preceded by discardable penalty, so not a breakpoint
+ \fi
+ %
+ \parindent=0in
+ \advance\leftskip by \defbodyindent
+ \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+ % First, check whether we are in the right environment:
+ \checkenv#1%
+ %
+ % As above, allow line break if we have multiple x headers in a row.
+ % It's not a great place, though.
+ \ifnum\lastpenalty=10002 \penalty3000 \fi
+ %
+ % And now, it's time to reuse the body of the original defun:
+ \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+ \begingroup
+ % call \deffnheader:
+ #1#2 \endheader
+ % common ending:
+ \interlinepenalty = 10000
+ \advance\rightskip by 0pt plus 1fil
+ \endgraf
+ \nobreak\vskip -\parskip
+ \penalty 10002 % signal to \startdefun and \dodefunx
+ % Some of the @defun-type tags do not enable magic parentheses,
+ % rendering the following check redundant. But we don't optimize.
+ \checkparencounts
+ \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remainnig is to define \deffnheader.
+%
+\def\makedefun#1{%
+ \expandafter\let\csname E#1\endcsname = \Edefun
+ \edef\temp{\noexpand\domakedefun
+ \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+ \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+ \envdef#1{%
+ \startdefun
+ \parseargusing\activeparens{\printdefunline#3}%
+ }%
+ \def#2{\dodefunx#1}%
+ \def#3%
+}
+
+%%% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+ % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+ \dosubind{fn}{\code{#3}}{#1}%
+ \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+%%% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+ \dosubind{fn}{\code{#4}}{#1}%
+ \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+%%% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+ \dosubind{vr}{\code{#4}}{#1}%
+ \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+%%% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+%%% Type:
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+ \doind{tp}{\code{#2}}%
+ \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+ % Get the values of \leftskip and \rightskip as they were outside the @def...
+ \advance\leftskip by -\defbodyindent
+ %
+ % How we'll format the type name. Putting it in brackets helps
+ % distinguish it from the body text that may end up on the next line
+ % just below it.
+ \def\temp{#1}%
+ \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+ %
+ % Figure out line sizes for the paragraph shape.
+ % The first line needs space for \box0; but if \rightskip is nonzero,
+ % we need only space for the part of \box0 which exceeds it:
+ \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
+ % The continuations:
+ \dimen2=\hsize \advance\dimen2 by -\defargsindent
+ % (plain.tex says that \dimen1 should be used only as global.)
+ \parshape 2 0in \dimen0 \defargsindent \dimen2
+ %
+ % Put the type name to the right margin.
+ \noindent
+ \hbox to 0pt{%
+ \hfil\box0 \kern-\hsize
+ % \hsize has to be shortened this way:
+ \kern\leftskip
+ % Intentionally do not respect \rightskip, since we need the space.
+ }%
+ %
+ % Allow all lines to be underfull without complaint:
+ \tolerance=10000 \hbadness=10000
+ \exdentamount=\defbodyindent
+ {%
+ % defun fonts. We use typewriter by default (used to be bold) because:
+ % . we're printing identifiers, they should be in tt in principle.
+ % . in languages with many accents, such as Czech or French, it's
+ % common to leave accents off identifiers. The result looks ok in
+ % tt, but exceedingly strange in rm.
+ % . we don't want -- and --- to be treated as ligatures.
+ % . this still does not fix the ?` and !` ligatures, but so far no
+ % one has made identifiers using them :).
+ \df \tt
+ \def\temp{#2}% return value type
+ \ifx\temp\empty\else \tclose{\temp} \fi
+ #3% output function name
+ }%
+ {\rm\enskip}% hskip 0.5 em of \tenrm
+ %
+ \boldbrax
+ % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name. This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable. Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+ % use sl by default (not ttsl),
+ % tt for the names.
+ \df \sl \hyphenchar\font=0
+ %
+ % On the other hand, if an argument has two dashes (for instance), we
+ % want a way to get ttsl. Let's try @var for that.
+ \let\var=\ttslanted
+ #1%
+ \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+ \catcode`\(=\active \catcode`\)=\active
+ \catcode`\[=\active \catcode`\]=\active
+ \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc. For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+ \activeparens
+ \global\let(=\lparen \global\let)=\rparen
+ \global\let[=\lbrack \global\let]=\rbrack
+ \global\let& = \&
+
+ \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+ \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\ }}
+
+\def\parenfont{%
+ \ifampseen
+ % At the first level, print parens in roman,
+ % otherwise use the default font.
+ \ifnum \parencount=1 \rm \fi
+ \else
+ % The \sf parens (in \boldbrax) actually are a little bolder than
+ % the contained text. This is especially needed for [ and ] .
+ \sf
+ \fi
+}
+\def\infirstlevel#1{%
+ \ifampseen
+ \ifnum\parencount=1
+ #1%
+ \fi
+ \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+ \global\advance\parencount by 1
+ {\parenfont(}%
+ \infirstlevel \bfafterword
+}
+\def\clnr{%
+ {\parenfont)}%
+ \infirstlevel \sl
+ \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+ \global\advance\brackcount by 1
+ {\bf[}%
+}
+\def\rbrb{%
+ {\bf]}%
+ \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+ \ifnum\parencount=0 \else \badparencount \fi
+ \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+\def\badparencount{%
+ \errmessage{Unbalanced parentheses in @def}%
+ \global\parencount=0
+}
+\def\badbrackcount{%
+ \errmessage{Unbalanced square braces in @def}%
+ \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\undefined
+ \newwrite\macscribble
+ \def\scantokens#1{%
+ \toks0={#1}%
+ \immediate\openout\macscribble=\jobname.tmp
+ \immediate\write\macscribble{\the\toks0}%
+ \immediate\closeout\macscribble
+ \input \jobname.tmp
+ }
+\fi
+
+\def\scanmacro#1{%
+ \begingroup
+ \newlinechar`\^^M
+ \let\xeatspaces\eatspaces
+ % Undo catcode changes of \startcontents and \doprintindex
+ % When called from @insertcopying or (short)caption, we need active
+ % backslash to get it printed correctly. Previously, we had
+ % \catcode`\\=\other instead. We'll see whether a problem appears
+ % with macro expansion. --kasal, 19aug04
+ \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+ % ... and \example
+ \spaceisspace
+ %
+ % Append \endinput to make sure that TeX does not see the ending newline.
+ % I've verified that it is necessary both for e-TeX and for ordinary TeX
+ % --kasal, 29nov03
+ \scantokens{#1\endinput}%
+ \endgroup
+}
+
+\def\scanexp#1{%
+ \edef\temp{\noexpand\scanmacro{#1}}%
+ \temp
+}
+
+\newcount\paramno % Count of parameters
+\newtoks\macname % Macro name
+\newif\ifrecursive % Is it recursive?
+
+% List of all defined macros in the form
+% \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+ \toks0 = \expandafter{\macrolist\definedummyword#1}%
+ \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+% \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+ \expandafter\let
+ \csname#1\expandafter\endcsname
+ \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \.
+
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+
+\def\scanctxt{%
+ \catcode`\"=\other
+ \catcode`\+=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\@=\other
+ \catcode`\^=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\~=\other
+}
+
+\def\scanargctxt{%
+ \scanctxt
+ \catcode`\\=\other
+ \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{%
+ \scanctxt
+ \catcode`\{=\other
+ \catcode`\}=\other
+ \catcode`\^^M=\other
+ \usembodybackslash
+}
+
+\def\macroargctxt{%
+ \scanctxt
+ \catcode`\\=\other
+}
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+ \getargs{#1}% now \macname is the macname and \argl the arglist
+ \ifx\argl\empty % no arguments
+ \paramno=0%
+ \else
+ \expandafter\parsemargdef \argl;%
+ \fi
+ \if1\csname ismacro.\the\macname\endcsname
+ \message{Warning: redefining \the\macname}%
+ \else
+ \expandafter\ifx\csname \the\macname\endcsname \relax
+ \else \errmessage{Macro name \the\macname\space already defined}\fi
+ \global\cslet{macsave.\the\macname}{\the\macname}%
+ \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+ \addtomacrolist{\the\macname}%
+ \fi
+ \begingroup \macrobodyctxt
+ \ifrecursive \expandafter\parsermacbody
+ \else \expandafter\parsemacbody
+ \fi}
+
+\parseargdef\unmacro{%
+ \if1\csname ismacro.#1\endcsname
+ \global\cslet{#1}{macsave.#1}%
+ \global\expandafter\let \csname ismacro.#1\endcsname=0%
+ % Remove the macro name from \macrolist:
+ \begingroup
+ \expandafter\let\csname#1\endcsname \relax
+ \let\definedummyword\unmacrodo
+ \xdef\macrolist{\macrolist}%
+ \endgroup
+ \else
+ \errmessage{Macro #1 not defined}%
+ \fi
+}
+
+% Called by \do from \dounmacro on each macro. The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+ \ifx #1\relax
+ % remove this
+ \else
+ \noexpand\definedummyword \noexpand#1%
+ \fi
+}
+
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% Parse the optional {params} list. Set up \paramno and \paramlist
+% so \defmacro knows what to do. Define \macarg.blah for each blah
+% in the params list, to be ##N where N is the position in that list.
+% That gets used by \mbodybackslash (above).
+
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+
+\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
+ \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
+\def\parsemargdefxxx#1,{%
+ \if#1;\let\next=\relax
+ \else \let\next=\parsemargdefxxx
+ \advance\paramno by 1%
+ \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+ {\xeatspaces{\hash\the\paramno}}%
+ \edef\paramlist{\paramlist\hash\the\paramno,}%
+ \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+
+% This defines the macro itself. There are six cases: recursive and
+% nonrecursive macros of zero, one, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+\def\defmacro{%
+ \let\hash=##% convert placeholders to macro parameter chars
+ \ifrecursive
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\scanmacro{\temp}}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup\noexpand\scanmacro{\temp}}%
+ \else % many
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+ \fi
+ \else
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \else % many
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \expandafter\noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \fi
+ \fi}
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {. If so it reads up to the closing }, if not, it reads the whole
+% line. Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg)
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+ \ifx\nchar\bgroup\else
+ \expandafter\parsearg
+ \fi \macnamexxx}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign. Just make them active and then expand them all to nothing.
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+ {%
+ \expandafter\let\obeyedspace=\empty
+ \addtomacrolist{#1}%
+ \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+ }%
+ \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+
+\newif\ifhavexrefs % True if xref values are known.
+\newif\ifwarnedxrefs % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+ node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references. The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross, , , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node. #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+ \ifx\lastnode\empty\else
+ \setref{\lastnode}{#1}%
+ \global\let\lastnode=\empty
+ \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \thissection,
+% or the anchor name.
+% 2) NAME-snt - section number and type, passed as the SNT arg, or
+% empty for anchors.
+% 3) NAME-pg - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat. In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+ \pdfmkdest{#1}%
+ \iflinks
+ {%
+ \atdummies % preserve commands, but don't expand them
+ \edef\writexrdef##1##2{%
+ \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+ ##1}{##2}}% these are parameters of \writexrdef
+ }%
+ \toks0 = \expandafter{\thissection}%
+ \immediate \writexrdef{title}{\the\toks0 }%
+ \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+ \writexrdef{pg}{\folio}% will be written later, during \shipout
+ }%
+ \fi
+}
+
+% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual. All but the node name can be omitted.
+%
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+ \unsepspaces
+ \def\printedmanual{\ignorespaces #5}%
+ \def\printedrefname{\ignorespaces #3}%
+ \setbox1=\hbox{\printedmanual\unskip}%
+ \setbox0=\hbox{\printedrefname\unskip}%
+ \ifdim \wd0 = 0pt
+ % No printed node name was explicitly given.
+ \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
+ % Use the node name inside the square brackets.
+ \def\printedrefname{\ignorespaces #1}%
+ \else
+ % Use the actual chapter/section title appear inside
+ % the square brackets. Use the real section title if we have it.
+ \ifdim \wd1 > 0pt
+ % It is in another manual, so we don't have it.
+ \def\printedrefname{\ignorespaces #1}%
+ \else
+ \ifhavexrefs
+ % We know the real title if we have the xref values.
+ \def\printedrefname{\refx{#1-title}{}}%
+ \else
+ % Otherwise just copy the Info node name.
+ \def\printedrefname{\ignorespaces #1}%
+ \fi%
+ \fi
+ \fi
+ \fi
+ %
+ % Make link in pdf output.
+ \ifpdf
+ \leavevmode
+ \getfilename{#4}%
+ {\turnoffactive
+ % See comments at \activebackslashdouble.
+ {\activebackslashdouble \xdef\pdfxrefdest{#1}%
+ \backslashparens\pdfxrefdest}%
+ %
+ \ifnum\filenamelength>0
+ \startlink attr{/Border [0 0 0]}%
+ goto file{\the\filename.pdf} name{\pdfxrefdest}%
+ \else
+ \startlink attr{/Border [0 0 0]}%
+ goto name{\pdfmkpgn{\pdfxrefdest}}%
+ \fi
+ }%
+ \linkcolor
+ \fi
+ %
+ % Float references are printed completely differently: "Figure 1.2"
+ % instead of "[somenode], p.3". We distinguish them by the
+ % LABEL-title being set to a magic string.
+ {%
+ % Have to otherify everything special to allow the \csname to
+ % include an _ in the xref name, etc.
+ \indexnofonts
+ \turnoffactive
+ \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+ \csname XR#1-title\endcsname
+ }%
+ \iffloat\Xthisreftitle
+ % If the user specified the print name (third arg) to the ref,
+ % print it instead of our usual "Figure 1.2".
+ \ifdim\wd0 = 0pt
+ \refx{#1-snt}{}%
+ \else
+ \printedrefname
+ \fi
+ %
+ % if the user also gave the printed manual name (fifth arg), append
+ % "in MANUALNAME".
+ \ifdim \wd1 > 0pt
+ \space \putwordin{} \cite{\printedmanual}%
+ \fi
+ \else
+ % node/anchor (non-float) references.
+ %
+ % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+ % insert empty discretionaries after hyphens, which means that it will
+ % not find a line break at a hyphen in a node names. Since some manuals
+ % are best written with fairly long node names, containing hyphens, this
+ % is a loss. Therefore, we give the text of the node name again, so it
+ % is as if TeX is seeing it for the first time.
+ \ifdim \wd1 > 0pt
+ \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+ \else
+ % _ (for example) has to be the character _ for the purposes of the
+ % control sequence corresponding to the node, but it has to expand
+ % into the usual \leavevmode...\vrule stuff for purposes of
+ % printing. So we \turnoffactive for the \refx-snt, back on for the
+ % printing, back off for the \refx-pg.
+ {\turnoffactive
+ % Only output a following space if the -snt ref is nonempty; for
+ % @unnumbered and @anchor, it won't be.
+ \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+ \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+ }%
+ % output the `[mynode]' via a macro so it can be overridden.
+ \xrefprintnodename\printedrefname
+ %
+ % But we always want a comma and a space:
+ ,\space
+ %
+ % output the `page 3'.
+ \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+ \fi
+ \fi
+ \endlink
+\endgroup}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output. It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents. Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+ \ifnum\secno=0
+ \putwordChapter@tie \the\chapno
+ \else \ifnum\subsecno=0
+ \putwordSection@tie \the\chapno.\the\secno
+ \else \ifnum\subsubsecno=0
+ \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+ \else
+ \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+ \fi\fi\fi
+}
+\def\Yappendix{%
+ \ifnum\secno=0
+ \putwordAppendix@tie @char\the\appendixno{}%
+ \else \ifnum\subsecno=0
+ \putwordSection@tie @char\the\appendixno.\the\secno
+ \else \ifnum\subsubsecno=0
+ \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+ \else
+ \putwordSection@tie
+ @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+ \fi\fi\fi
+}
+
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+ {%
+ \indexnofonts
+ \otherbackslash
+ \expandafter\global\expandafter\let\expandafter\thisrefX
+ \csname XR#1\endcsname
+ }%
+ \ifx\thisrefX\relax
+ % If not defined, say something at least.
+ \angleleft un\-de\-fined\angleright
+ \iflinks
+ \ifhavexrefs
+ \message{\linenumber Undefined cross reference `#1'.}%
+ \else
+ \ifwarnedxrefs\else
+ \global\warnedxrefstrue
+ \message{Cross reference values unknown; you must run TeX again.}%
+ \fi
+ \fi
+ \fi
+ \else
+ % It's defined, so just use it.
+ \thisrefX
+ \fi
+ #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file. Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions). But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+ \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
+ %
+ % Was that xref control sequence that we just defined for a float?
+ \expandafter\iffloat\csname XR#1\endcsname
+ % it was a float, and we have the (safe) float type in \iffloattype.
+ \expandafter\let\expandafter\floatlist
+ \csname floatlist\iffloattype\endcsname
+ %
+ % Is this the first time we've seen this float type?
+ \expandafter\ifx\floatlist\relax
+ \toks0 = {\do}% yes, so just \do
+ \else
+ % had it before, so preserve previous elements in list.
+ \toks0 = \expandafter{\floatlist\do}%
+ \fi
+ %
+ % Remember this xref in the control sequence \floatlistFLOATTYPE,
+ % for later use in \listoffloats.
+ \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
+ \fi
+}
+
+% Read the last existing aux file, if any. No error if none exists.
+%
+\def\tryauxfile{%
+ \openin 1 \jobname.aux
+ \ifeof 1 \else
+ \readdatafile{aux}%
+ \global\havexrefstrue
+ \fi
+ \closein 1
+}
+
+\def\setupdatafile{%
+ \catcode`\^^@=\other
+ \catcode`\^^A=\other
+ \catcode`\^^B=\other
+ \catcode`\^^C=\other
+ \catcode`\^^D=\other
+ \catcode`\^^E=\other
+ \catcode`\^^F=\other
+ \catcode`\^^G=\other
+ \catcode`\^^H=\other
+ \catcode`\^^K=\other
+ \catcode`\^^L=\other
+ \catcode`\^^N=\other
+ \catcode`\^^P=\other
+ \catcode`\^^Q=\other
+ \catcode`\^^R=\other
+ \catcode`\^^S=\other
+ \catcode`\^^T=\other
+ \catcode`\^^U=\other
+ \catcode`\^^V=\other
+ \catcode`\^^W=\other
+ \catcode`\^^X=\other
+ \catcode`\^^Z=\other
+ \catcode`\^^[=\other
+ \catcode`\^^\=\other
+ \catcode`\^^]=\other
+ \catcode`\^^^=\other
+ \catcode`\^^_=\other
+ % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+ % in xref tags, i.e., node names. But since ^^e4 notation isn't
+ % supported in the main text, it doesn't seem desirable. Furthermore,
+ % that is not enough: for node names that actually contain a ^
+ % character, we would end up writing a line like this: 'xrdef {'hat
+ % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+ % argument, and \hat is not an expandable control sequence. It could
+ % all be worked out, but why? Either we support ^^ or we don't.
+ %
+ % The other change necessary for this was to define \auxhat:
+ % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+ % and then to call \auxhat in \setq.
+ %
+ \catcode`\^=\other
+ %
+ % Special characters. Should be turned off anyway, but...
+ \catcode`\~=\other
+ \catcode`\[=\other
+ \catcode`\]=\other
+ \catcode`\"=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\$=\other
+ \catcode`\#=\other
+ \catcode`\&=\other
+ \catcode`\%=\other
+ \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+ %
+ % This is to support \ in node names and titles, since the \
+ % characters end up in a \csname. It's easier than
+ % leaving it active and making its active definition an actual \
+ % character. What I don't understand is why it works in the *value*
+ % of the xrdef. Seems like it should be a catcode12 \, and that
+ % should not typeset properly. But it works, so I'm moving on for
+ % now. --karl, 15jan04.
+ \catcode`\\=\other
+ %
+ % Make the characters 128-255 be printing characters.
+ {%
+ \count1=128
+ \def\loop{%
+ \catcode\count1=\other
+ \advance\count1 by 1
+ \ifnum \count1<256 \loop \fi
+ }%
+ }%
+ %
+ % @ is our escape character in .aux files, and we need braces.
+ \catcode`\{=1
+ \catcode`\}=2
+ \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+ \setupdatafile
+ \input\jobname.#1
+\endgroup}
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes. Otherwise like plain.
+\gdef\footnote{%
+ \let\indent=\ptexindent
+ \let\noindent=\ptexnoindent
+ \global\advance\footnoteno by \@ne
+ \edef\thisfootno{$^{\the\footnoteno}$}%
+ %
+ % In case the footnote comes at the end of a sentence, preserve the
+ % extra spacing after we do the footnote number.
+ \let\@sf\empty
+ \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+ %
+ % Remove inadvertent blank space before typesetting the footnote number.
+ \unskip
+ \thisfootno\@sf
+ \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter. Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read. --karl, 16nov96.
+%
+\gdef\dofootnote{%
+ \insert\footins\bgroup
+ % We want to typeset this text as a normal paragraph, even if the
+ % footnote reference occurs in (for example) a display environment.
+ % So reset some parameters.
+ \hsize=\pagewidth
+ \interlinepenalty\interfootnotelinepenalty
+ \splittopskip\ht\strutbox % top baseline for broken footnotes
+ \splitmaxdepth\dp\strutbox
+ \floatingpenalty\@MM
+ \leftskip\z@skip
+ \rightskip\z@skip
+ \spaceskip\z@skip
+ \xspaceskip\z@skip
+ \parindent\defaultparindent
+ %
+ \smallfonts \rm
+ %
+ % Because we use hanging indentation in footnotes, a @noindent appears
+ % to exdent this text, so make it be a no-op. makeinfo does not use
+ % hanging indentation so @noindent can still be needed within footnote
+ % text after an @example or the like (not that this is good style).
+ \let\noindent = \relax
+ %
+ % Hang the footnote text off the number. Use \everypar in case the
+ % footnote extends for more than one paragraph.
+ \everypar = {\hang}%
+ \textindent{\thisfootno}%
+ %
+ % Don't crash into the line above the footnote text. Since this
+ % expands into a box, it must come within the paragraph, lest it
+ % provide a place where TeX can split the footnote.
+ \footstrut
+ \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished. Otherwise, the insertion
+% would be lost.
+% Similarily, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes. --kasal, 16nov03.
+
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+ \ifx \insert\ptexinsert
+ \let\insert\saveinsert
+ \else
+ \let\checkinserts\relax
+ \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+ \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+ \afterassignment\next
+ % swallow the left brace
+ \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+ \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+ {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+ \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
+ \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+ \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+ \next
+}
+\def\newsaveinsX #1{%
+ \csname newbox\endcsname #1%
+ \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+ \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image. We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front. If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+ % Do not bother showing banner with epsf.tex v2.7k (available in
+ % doc/epsf.tex and on ctan).
+ \def\epsfannounce{\toks0 = }%
+ \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+ work. It is also included in the Texinfo distribution, or you can get
+ it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+ \ifx\epsfbox\undefined
+ \ifwarnednoepsf \else
+ \errhelp = \noepsfhelp
+ \errmessage{epsf.tex not found, images will be ignored}%
+ \global\warnednoepsftrue
+ \fi
+ \else
+ \imagexxx #1,,,,,\finish
+ \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing this stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+ \catcode`\^^M = 5 % in case we're inside an example
+ \normalturnoffactive % allow _ et al. in names
+ % If the image is by itself, center it.
+ \ifvmode
+ \imagevmodetrue
+ \nobreak\bigskip
+ % Usually we'll have text after the image which will insert
+ % \parskip glue, so insert it here too to equalize the space
+ % above and below.
+ \nobreak\vskip\parskip
+ \nobreak
+ \line\bgroup
+ \fi
+ %
+ % Output the image.
+ \ifpdf
+ \dopdfimage{#1}{#2}{#3}%
+ \else
+ % \epsfbox itself resets \epsf?size at each figure.
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+ \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+ \epsfbox{#1.eps}%
+ \fi
+ %
+ \ifimagevmode \egroup \bigbreak \fi % space after the image
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc. We don't actually implement floating yet, we always include the
+% float "here". But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label. Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored. It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+ \let\thiscaption=\empty
+ \let\thisshortcaption=\empty
+ %
+ % don't lose footnotes inside @float.
+ %
+ % BEWARE: when the floats start float, we have to issue warning whenever an
+ % insert appears inside a float which could possibly float. --kasal, 26may04
+ %
+ \startsavinginserts
+ %
+ % We can't be used inside a paragraph.
+ \par
+ %
+ \vtop\bgroup
+ \def\floattype{#1}%
+ \def\floatlabel{#2}%
+ \def\floatloc{#3}% we do nothing with this yet.
+ %
+ \ifx\floattype\empty
+ \let\safefloattype=\empty
+ \else
+ {%
+ % the floattype might have accents or other special characters,
+ % but we need to use it in a control sequence name.
+ \indexnofonts
+ \turnoffactive
+ \xdef\safefloattype{\floattype}%
+ }%
+ \fi
+ %
+ % If label is given but no type, we handle that as the empty type.
+ \ifx\floatlabel\empty \else
+ % We want each FLOATTYPE to be numbered separately (Figure 1,
+ % Table 1, Figure 2, ...). (And if no label, no number.)
+ %
+ \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+ \global\advance\floatno by 1
+ %
+ {%
+ % This magic value for \thissection is output by \setref as the
+ % XREFLABEL-title value. \xrefX uses it to distinguish float
+ % labels (which have a completely different output format) from
+ % node and anchor labels. And \xrdef uses it to construct the
+ % lists of floats.
+ %
+ \edef\thissection{\floatmagic=\safefloattype}%
+ \setref{\floatlabel}{Yfloat}%
+ }%
+ \fi
+ %
+ % start with \parskip glue, I guess.
+ \vskip\parskip
+ %
+ % Don't suppress indentation if a float happens to start a section.
+ \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption: Foo 1.1
+% @float Foo & @caption{Cap}: Foo: Cap
+% @float Foo & no caption: Foo
+% @float ,lbl & Caption{Cap}: 1.1: Cap
+% @float ,lbl & no caption: 1.1
+% @float & @caption{Cap}: Cap
+% @float & no caption:
+%
+\def\Efloat{%
+ \let\floatident = \empty
+ %
+ % In all cases, if we have a float type, it comes first.
+ \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+ %
+ % If we have an xref label, the number comes next.
+ \ifx\floatlabel\empty \else
+ \ifx\floattype\empty \else % if also had float type, need tie first.
+ \appendtomacro\floatident{\tie}%
+ \fi
+ % the number.
+ \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+ \fi
+ %
+ % Start the printed caption with what we've constructed in
+ % \floatident, but keep it separate; we need \floatident again.
+ \let\captionline = \floatident
+ %
+ \ifx\thiscaption\empty \else
+ \ifx\floatident\empty \else
+ \appendtomacro\captionline{: }% had ident, so need a colon between
+ \fi
+ %
+ % caption text.
+ \appendtomacro\captionline{\scanexp\thiscaption}%
+ \fi
+ %
+ % If we have anything to print, print it, with space before.
+ % Eventually this needs to become an \insert.
+ \ifx\captionline\empty \else
+ \vskip.5\parskip
+ \captionline
+ %
+ % Space below caption.
+ \vskip\parskip
+ \fi
+ %
+ % If have an xref label, write the list of floats info. Do this
+ % after the caption, to avoid chance of it being a breakpoint.
+ \ifx\floatlabel\empty \else
+ % Write the text that goes in the lof to the aux file as
+ % \floatlabel-lof. Besides \floatident, we include the short
+ % caption if specified, else the full caption if specified, else nothing.
+ {%
+ \atdummies
+ %
+ % since we read the caption text in the macro world, where ^^M
+ % is turned into a normal character, we have to scan it back, so
+ % we don't write the literal three characters "^^M" into the aux file.
+ \scanexp{%
+ \xdef\noexpand\gtemp{%
+ \ifx\thisshortcaption\empty
+ \thiscaption
+ \else
+ \thisshortcaption
+ \fi
+ }%
+ }%
+ \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+ \ifx\gtemp\empty \else : \gtemp \fi}}%
+ }%
+ \fi
+ \egroup % end of \vtop
+ %
+ % place the captured inserts
+ %
+ % BEWARE: when the floats start floating, we have to issue warning
+ % whenever an insert appears inside a float which could possibly
+ % float. --kasal, 26may04
+ %
+ \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+ \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use. Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+ \ifx#1\relax
+ % Haven't seen this figure type before.
+ \csname newcount\endcsname #1%
+ %
+ % Remember to reset this floatno at the next chap.
+ \expandafter\gdef\expandafter\resetallfloatnos
+ \expandafter{\resetallfloatnos #1=0 }%
+ \fi
+ \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value. We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref. That is, the magic
+% \thissection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string. If so, #2 will be the
+% (safe) float type for this float. We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+ \def\temp{#1}%
+ \def\iffloattype{#2}%
+ \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+ \def\floattype{#1}% floattype
+ {%
+ % the floattype might have accents or other special characters,
+ % but we need to use it in a control sequence name.
+ \indexnofonts
+ \turnoffactive
+ \xdef\safefloattype{\floattype}%
+ }%
+ %
+ % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+ \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+ \ifhavexrefs
+ % if the user said @listoffloats foo but never @float foo.
+ \message{\linenumber No `\safefloattype' floats to list.}%
+ \fi
+ \else
+ \begingroup
+ \leftskip=\tocindent % indent these entries like a toc
+ \let\do=\listoffloatsdo
+ \csname floatlist\safefloattype\endcsname
+ \endgroup
+ \fi
+}
+
+% This is called on each entry in a list of floats. We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file. We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+ % Can't fully expand XR#1-lof because it can contain anything. Just
+ % pass the control sequence. On the other hand, XR#1-pg is just the
+ % page number, and we want to fully expand that so we can get a link
+ % in pdf output.
+ \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+ %
+ % use the same \entry macro we use to generate the TOC and index.
+ \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+ \writeentry
+}}
+
+\message{localization,}
+% and i18n.
+
+% @documentlanguage is usually given very early, just after
+% @setfilename. If done too late, it may not override everything
+% properly. Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
+%
+\parseargdef\documentlanguage{%
+ \tex % read txi-??.tex file in plain TeX.
+ % Read the file if it exists.
+ \openin 1 txi-#1.tex
+ \ifeof 1
+ \errhelp = \nolanghelp
+ \errmessage{Cannot read language file txi-#1.tex}%
+ \else
+ \input txi-#1.tex
+ \fi
+ \closein 1
+ \endgroup
+}
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty. Maybe you need to install it? In the current directory
+should work if nowhere else does.}
+
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{
+ \count255=128
+ \loop\ifnum\count255<256
+ \global\catcode\count255=#1
+ \advance\count255 by 1
+ \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\parseargdef\documentencoding{%
+ % Encoding being declared for the document.
+ \def\declaredencoding{\csname #1.enc\endcsname}%
+ %
+ % Supported encodings: names converted to tokens in order to be able
+ % to compare them with \ifx.
+ \def\latone{\csname ISO-8859-1.enc\endcsname}%
+ \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+ \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+ \def\ascii{\csname US-ASCII.enc\endcsname}%
+ %
+ \ifx \declaredencoding \ascii
+ \asciichardefs
+ %
+ \else \ifx \declaredencoding \lattwo
+ \setnonasciicharscatcode\active
+ \lattwochardefs
+ %
+ \else \ifx \declaredencoding \latone
+ \setnonasciicharscatcode\active
+ \latonechardefs
+ %
+ \else \ifx \declaredencoding \latnine
+ \setnonasciicharscatcode\active
+ \latninechardefs
+ %
+ \else
+ \message{Unknown document encoding #1, ignoring.}%
+ %
+ \fi % latnine
+ \fi % latone
+ \fi % lattwo
+ \fi % ascii
+}
+
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+ \gdef^^a0{~}
+ \gdef^^a1{\exclamdown}
+ \gdef^^a2{\missingcharmsg{CENT SIGN}}
+ \gdef^^a3{{\pounds}}
+ \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+ \gdef^^a5{\missingcharmsg{YEN SIGN}}
+ \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+ \gdef^^a7{\S}
+ \gdef^^a8{\"{}}
+ \gdef^^a9{\copyright}
+ \gdef^^aa{\ordf}
+ \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^ac{$\lnot$}
+ \gdef^^ad{\-}
+ \gdef^^ae{\registeredsymbol}
+ \gdef^^af{\={}}
+ %
+ \gdef^^b0{\textdegree}
+ \gdef^^b1{$\pm$}
+ \gdef^^b2{$^2$}
+ \gdef^^b3{$^3$}
+ \gdef^^b4{\'{}}
+ \gdef^^b5{$\mu$}
+ \gdef^^b6{\P}
+ %
+ \gdef^^b7{$^.$}
+ \gdef^^b8{\cedilla\ }
+ \gdef^^b9{$^1$}
+ \gdef^^ba{\ordm}
+ %
+ \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^bc{$1\over4$}
+ \gdef^^bd{$1\over2$}
+ \gdef^^be{$3\over4$}
+ \gdef^^bf{\questiondown}
+ %
+ \gdef^^c0{\`A}
+ \gdef^^c1{\'A}
+ \gdef^^c2{\^A}
+ \gdef^^c3{\~A}
+ \gdef^^c4{\"A}
+ \gdef^^c5{\ringaccent A}
+ \gdef^^c6{\AE}
+ \gdef^^c7{\cedilla C}
+ \gdef^^c8{\`E}
+ \gdef^^c9{\'E}
+ \gdef^^ca{\^E}
+ \gdef^^cb{\"E}
+ \gdef^^cc{\`I}
+ \gdef^^cd{\'I}
+ \gdef^^ce{\^I}
+ \gdef^^cf{\"I}
+ %
+ \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}}
+ \gdef^^d1{\~N}
+ \gdef^^d2{\`O}
+ \gdef^^d3{\'O}
+ \gdef^^d4{\^O}
+ \gdef^^d5{\~O}
+ \gdef^^d6{\"O}
+ \gdef^^d7{$\times$}
+ \gdef^^d8{\O}
+ \gdef^^d9{\`U}
+ \gdef^^da{\'U}
+ \gdef^^db{\^U}
+ \gdef^^dc{\"U}
+ \gdef^^dd{\'Y}
+ \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}}
+ \gdef^^df{\ss}
+ %
+ \gdef^^e0{\`a}
+ \gdef^^e1{\'a}
+ \gdef^^e2{\^a}
+ \gdef^^e3{\~a}
+ \gdef^^e4{\"a}
+ \gdef^^e5{\ringaccent a}
+ \gdef^^e6{\ae}
+ \gdef^^e7{\cedilla c}
+ \gdef^^e8{\`e}
+ \gdef^^e9{\'e}
+ \gdef^^ea{\^e}
+ \gdef^^eb{\"e}
+ \gdef^^ec{\`{\dotless i}}
+ \gdef^^ed{\'{\dotless i}}
+ \gdef^^ee{\^{\dotless i}}
+ \gdef^^ef{\"{\dotless i}}
+ %
+ \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}}
+ \gdef^^f1{\~n}
+ \gdef^^f2{\`o}
+ \gdef^^f3{\'o}
+ \gdef^^f4{\^o}
+ \gdef^^f5{\~o}
+ \gdef^^f6{\"o}
+ \gdef^^f7{$\div$}
+ \gdef^^f8{\o}
+ \gdef^^f9{\`u}
+ \gdef^^fa{\'u}
+ \gdef^^fb{\^u}
+ \gdef^^fc{\"u}
+ \gdef^^fd{\'y}
+ \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}}
+ \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+ % Encoding is almost identical to Latin1.
+ \latonechardefs
+ %
+ \gdef^^a4{\euro}
+ \gdef^^a6{\v S}
+ \gdef^^a8{\v s}
+ \gdef^^b4{\v Z}
+ \gdef^^b8{\v z}
+ \gdef^^bc{\OE}
+ \gdef^^bd{\oe}
+ \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+ \gdef^^a0{~}
+ \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}}
+ \gdef^^a2{\u{}}
+ \gdef^^a3{\L}
+ \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+ \gdef^^a5{\v L}
+ \gdef^^a6{\'S}
+ \gdef^^a7{\S}
+ \gdef^^a8{\"{}}
+ \gdef^^a9{\v S}
+ \gdef^^aa{\cedilla S}
+ \gdef^^ab{\v T}
+ \gdef^^ac{\'Z}
+ \gdef^^ad{\-}
+ \gdef^^ae{\v Z}
+ \gdef^^af{\dotaccent Z}
+ %
+ \gdef^^b0{\textdegree}
+ \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}}
+ \gdef^^b2{\missingcharmsg{OGONEK}}
+ \gdef^^b3{\l}
+ \gdef^^b4{\'{}}
+ \gdef^^b5{\v l}
+ \gdef^^b6{\'s}
+ \gdef^^b7{\v{}}
+ \gdef^^b8{\cedilla\ }
+ \gdef^^b9{\v s}
+ \gdef^^ba{\cedilla s}
+ \gdef^^bb{\v t}
+ \gdef^^bc{\'z}
+ \gdef^^bd{\H{}}
+ \gdef^^be{\v z}
+ \gdef^^bf{\dotaccent z}
+ %
+ \gdef^^c0{\'R}
+ \gdef^^c1{\'A}
+ \gdef^^c2{\^A}
+ \gdef^^c3{\u A}
+ \gdef^^c4{\"A}
+ \gdef^^c5{\'L}
+ \gdef^^c6{\'C}
+ \gdef^^c7{\cedilla C}
+ \gdef^^c8{\v C}
+ \gdef^^c9{\'E}
+ \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}}
+ \gdef^^cb{\"E}
+ \gdef^^cc{\v E}
+ \gdef^^cd{\'I}
+ \gdef^^ce{\^I}
+ \gdef^^cf{\v D}
+ %
+ \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}}
+ \gdef^^d1{\'N}
+ \gdef^^d2{\v N}
+ \gdef^^d3{\'O}
+ \gdef^^d4{\^O}
+ \gdef^^d5{\H O}
+ \gdef^^d6{\"O}
+ \gdef^^d7{$\times$}
+ \gdef^^d8{\v R}
+ \gdef^^d9{\ringaccent U}
+ \gdef^^da{\'U}
+ \gdef^^db{\H U}
+ \gdef^^dc{\"U}
+ \gdef^^dd{\'Y}
+ \gdef^^de{\cedilla T}
+ \gdef^^df{\ss}
+ %
+ \gdef^^e0{\'r}
+ \gdef^^e1{\'a}
+ \gdef^^e2{\^a}
+ \gdef^^e3{\u a}
+ \gdef^^e4{\"a}
+ \gdef^^e5{\'l}
+ \gdef^^e6{\'c}
+ \gdef^^e7{\cedilla c}
+ \gdef^^e8{\v c}
+ \gdef^^e9{\'e}
+ \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}}
+ \gdef^^eb{\"e}
+ \gdef^^ec{\v e}
+ \gdef^^ed{\'\i}
+ \gdef^^ee{\^\i}
+ \gdef^^ef{\v d}
+ %
+ \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}}
+ \gdef^^f1{\'n}
+ \gdef^^f2{\v n}
+ \gdef^^f3{\'o}
+ \gdef^^f4{\^o}
+ \gdef^^f5{\H o}
+ \gdef^^f6{\"o}
+ \gdef^^f7{$\div$}
+ \gdef^^f8{\v r}
+ \gdef^^f9{\ringaccent u}
+ \gdef^^fa{\'u}
+ \gdef^^fb{\H u}
+ \gdef^^fc{\"u}
+ \gdef^^fd{\'y}
+ \gdef^^fe{\cedilla t}
+ \gdef^^ff{\dotaccent{}}
+}
+
+% US-ASCII character definitions.
+\def\asciichardefs{%
+ % Nothing needs to be done
+ \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+% Page size parameters.
+%
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be so finicky about underfull hboxes, either.
+\hbadness = 2000
+
+% Following George Bush, just get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything. We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize. We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+ \ifx\emergencystretch\thisisundefined
+ % Allow us to assign to \emergencystretch anyway.
+ \def\emergencystretch{\dimen0}%
+ \else
+ \emergencystretch = .15\hsize
+ \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading. The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+ \voffset = #3\relax
+ \topskip = #6\relax
+ \splittopskip = \topskip
+ %
+ \vsize = #1\relax
+ \advance\vsize by \topskip
+ \outervsize = \vsize
+ \advance\outervsize by 2\topandbottommargin
+ \pageheight = \vsize
+ %
+ \hsize = #2\relax
+ \outerhsize = \hsize
+ \advance\outerhsize by 0.5in
+ \pagewidth = \hsize
+ %
+ \normaloffset = #4\relax
+ \bindingoffset = #5\relax
+ %
+ \ifpdf
+ \pdfpageheight #7\relax
+ \pdfpagewidth #8\relax
+ \fi
+ %
+ \setleading{\textleading}
+ %
+ \parindent = \defaultparindent
+ \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \textleading = 13.2pt
+ %
+ % If page is nothing but text, make it come out even.
+ \internalpagesizes{46\baselineskip}{6in}%
+ {\voffset}{.25in}%
+ {\bindingoffset}{36pt}%
+ {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+ \parskip = 2pt plus 1pt
+ \textleading = 12pt
+ %
+ \internalpagesizes{7.5in}{5in}%
+ {\voffset}{.25in}%
+ {\bindingoffset}{16pt}%
+ {9.25in}{7in}%
+ %
+ \lispnarrowing = 0.3in
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+ \parskip = 1.5pt plus 1pt
+ \textleading = 12pt
+ %
+ \internalpagesizes{7.4in}{4.8in}%
+ {-.2in}{-.4in}%
+ {0pt}{14pt}%
+ {9in}{6in}%
+ %
+ \lispnarrowing = 0.25in
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \textleading = 13.2pt
+ %
+ % Double-side printing via postscript on Laserjet 4050
+ % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+ % To change the settings for a different printer or situation, adjust
+ % \normaloffset until the front-side and back-side texts align. Then
+ % do the same for \bindingoffset. You can set these for testing in
+ % your texinfo source file like this:
+ % @tex
+ % \global\normaloffset = -6mm
+ % \global\bindingoffset = 10mm
+ % @end tex
+ \internalpagesizes{51\baselineskip}{160mm}
+ {\voffset}{\hoffset}%
+ {\bindingoffset}{44pt}%
+ {297mm}{210mm}%
+ %
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+ \parskip = 2pt plus 1pt minus 0.1pt
+ \textleading = 12.5pt
+ %
+ \internalpagesizes{160mm}{120mm}%
+ {\voffset}{\hoffset}%
+ {\bindingoffset}{8pt}%
+ {210mm}{148mm}%
+ %
+ \lispnarrowing = 0.2in
+ \tolerance = 800
+ \hfuzz = 1.2pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = 2mm
+ \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+ \afourpaper
+ \internalpagesizes{237mm}{150mm}%
+ {\voffset}{4.6mm}%
+ {\bindingoffset}{7mm}%
+ {297mm}{210mm}%
+ %
+ % Must explicitly reset to 0 because we call \afourpaper.
+ \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+ \afourpaper
+ \internalpagesizes{241mm}{165mm}%
+ {\voffset}{-2.95mm}%
+ {\bindingoffset}{7mm}%
+ {297mm}{210mm}%
+ \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+ \globaldefs = 1
+ %
+ \parskip = 3pt plus 2pt minus 1pt
+ \setleading{\textleading}%
+ %
+ \dimen0 = #1
+ \advance\dimen0 by \voffset
+ %
+ \dimen2 = \hsize
+ \advance\dimen2 by \normaloffset
+ %
+ \internalpagesizes{#1}{\hsize}%
+ {\voffset}{\normaloffset}%
+ {\bindingoffset}{44pt}%
+ {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other
+\catcode`\~=\other
+\catcode`\^=\other
+\catcode`\_=\other
+\catcode`\|=\other
+\catcode`\<=\other
+\catcode`\>=\other
+\catcode`\+=\other
+\catcode`\$=\other
+\def\normaldoublequote{"}
+\def\normaltilde{~}
+\def\normalcaret{^}
+\def\normalunderscore{_}
+\def\normalverticalbar{|}
+\def\normalless{<}
+\def\normalgreater{>}
+\def\normalplus{+}
+\def\normaldollar{$}%$ font-lock fix
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise. Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font. Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts. But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Turn off all special characters except @
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active
+\def~{{\tt\char126}}
+\chardef\hat=`\^
+\catcode`\^=\active
+\def^{{\tt \hat}}
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
+\catcode`\|=\active
+\def|{{\tt\char124}}
+\chardef \less=`\<
+\catcode`\<=\active
+\def<{{\tt \less}}
+\chardef \gtr=`\>
+\catcode`\>=\active
+\def>{{\tt \gtr}}
+\catcode`\+=\active
+\def+{{\tt \char 43}}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+ \normalturnoffactive
+ \otherbackslash
+}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active
+@def@normalbackslash{{@tt@backslashcurfont}}
+% On startup, @fixbackslash assigns:
+% @let \ = @normalbackslash
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+@def@normalturnoffactive{%
+ @let\=@normalbackslash
+ @let"=@normaldoublequote
+ @let~=@normaltilde
+ @let^=@normalcaret
+ @let_=@normalunderscore
+ @let|=@normalverticalbar
+ @let<=@normalless
+ @let>=@normalgreater
+ @let+=@normalplus
+ @let$=@normaldollar %$ font-lock fix
+ @unsepspaces
+}
+
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+%
+@gdef@eatinput input texinfo{@fixbackslash}
+@global@let\ = @eatinput
+
+% On the other hand, perhaps the file did not have a `\input texinfo'. Then
+% the first `\' in the file would cause an error. This macro tries to fix
+% that, assuming it is called before the first `\' could plausibly occur.
+% Also turn back on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{%
+ @ifx\@eatinput @let\ = @normalbackslash @fi
+ @catcode`+=@active
+ @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These look ok in all fonts, so just make them not special.
+@catcode`@& = @other
+@catcode`@# = @other
+@catcode`@% = @other
+
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+ arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
+++ /dev/null
-/* config.h.in. Generated from configure.in by autoheader. */
-
-/* Define if an assembler version of longest_match is available. */
-#undef ASMV
-
-/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
- */
-#undef HAVE_DIRENT_H
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the `lstat' function. */
-#undef HAVE_LSTAT
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
-#undef HAVE_NDIR_H
-
-/* Define to 1 if you have the `rpmatch' function. */
-#undef HAVE_RPMATCH
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
- */
-#undef HAVE_SYS_DIR_H
-
-/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
- */
-#undef HAVE_SYS_NDIR_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <sys/utime.h> header file. */
-#undef HAVE_SYS_UTIME_H
-
-/* Define to 1 if you have the <time.h> header file. */
-#undef HAVE_TIME_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the `utime' function. */
-#undef HAVE_UTIME
-
-/* Define to 1 if you have the <utime.h> header file. */
-#undef HAVE_UTIME_H
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#undef RETSIGTYPE
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to 1 if on AIX 3.
- System headers sometimes define this.
- We just want to avoid a redefinition error message. */
-#ifndef _ALL_SOURCE
-# undef _ALL_SOURCE
-#endif
-
-/* Number of bits in a file offset, on hosts where this is settable. */
-#undef _FILE_OFFSET_BITS
-
-/* Enable GNU extensions on systems that have them. */
-#ifndef _GNU_SOURCE
-# undef _GNU_SOURCE
-#endif
-
-/* Define for large files, on AIX-style hosts. */
-#undef _LARGE_FILES
-
-/* Define to 1 if on MINIX. */
-#undef _MINIX
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
- this defined. */
-#undef _POSIX_1_SOURCE
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-#undef _POSIX_SOURCE
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `long' if <sys/types.h> does not define. */
-#undef off_t
-
-/* Define to `unsigned' if <sys/types.h> does not define. */
-#undef size_t
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for gzip 1.3.5.
+# Generated by GNU Autoconf 2.61 for gzip 1.3.9.
#
# Report bugs to <bug-gzip@gnu.org>.
#
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- $as_unset $as_var
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# CDPATH.
+$as_unset CDPATH
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
fi
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
+ case $as_dir in
/*)
- if ("$as_dir/$as_base" -c '
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell autoconf@gnu.org about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
+ chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
as_mkdir_p=false
fi
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
+exec 7<&0 </dev/null 6>&1
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-exec 6>&1
-
#
# Initializations.
#
ac_default_prefix=/usr/local
+ac_clean_files=
ac_config_libobj_dir=.
+LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
# Identity of this package.
PACKAGE_NAME='gzip'
PACKAGE_TARNAME='gzip'
-PACKAGE_VERSION='1.3.5'
-PACKAGE_STRING='gzip 1.3.5'
+PACKAGE_VERSION='1.3.9'
+PACKAGE_STRING='gzip 1.3.9'
PACKAGE_BUGREPORT='bug-gzip@gnu.org'
ac_unique_file="gzip.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-# include <stdint.h>
-# endif
#endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP LN_S EGREP LIBOBJS ac_prefix_program ASCPP SEDCMD LTLIBOBJS'
+ac_header_list=
+ac_func_list=
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+am__isrc
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+CPP
+NM
+LN_S
+RANLIB
+GREP
+EGREP
+GL_COND_LIBTOOL_TRUE
+GL_COND_LIBTOOL_FALSE
+ABSOLUTE_FCNTL_H
+FCNTL_H
+GETOPT_H
+STDBOOL_H
+HAVE__BOOL
+ABSOLUTE_SYS_STAT_H
+SYS_STAT_H
+UNISTD_H
+LIBGZIP_LIBDEPS
+LIBGZIP_LTLIBDEPS
+ASCPPPOST
+ASCPPFLAGS
+LIBOBJS
+ASFLAGS_config
+ac_prefix_program
+LTLIBOBJS
+gl_LIBOBJS
+gl_LTLIBOBJS'
ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
# Initialize some variables set by options.
ac_init_help=
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
ac_prev=
+ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
+ eval $ac_prev=\$ac_option
ac_prev=
continue
fi
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
# Accept the important Cygnus configure options, so we can diagnose typos.
- case $ac_option in
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
--config-cache | -C)
cache_file=config.cache ;;
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ -datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
-localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
+ | --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
+ eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
{ (exit 1); exit 1; }; }
fi
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
do
- eval ac_val=$`echo $ac_var`
+ eval ac_val=\$$ac_var
case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
done
# There might be people who depend on the old broken behavior: `$host'
test "$silent" = yes && exec 6>/dev/null
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$0" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
+ if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
- fi
fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
#
# Report the --help message.
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures gzip 1.3.5 to adapt to many kinds of systems.
+\`configure' configures gzip 1.3.9 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
-_ACEOF
-
- cat <<_ACEOF
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data [PREFIX/share]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/gzip]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of gzip 1.3.5:";;
+ short | recursive ) echo "Configuration of gzip 1.3.9:";;
esac
cat <<\_ACEOF
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
Report bugs to <bug-gzip@gnu.org>.
_ACEOF
+ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
+ test -d "$ac_dir" || continue
ac_builddir=.
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd "$ac_popdir"
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-gzip configure 1.3.5
-generated by GNU Autoconf 2.59
+gzip configure 1.3.9
+generated by GNU Autoconf 2.61
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
- exit 0
+ exit
fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by gzip $as_me 1.3.5, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+It was created by gzip $as_me 1.3.9, which was
+generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
_ACEOF
+exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
test -z "$as_dir" && as_dir=.
echo "PATH: $as_dir"
done
+IFS=$as_save_IFS
} >&5
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
-ac_sep=
ac_must_keep_next=false
for ac_pass in 1 2
do
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ *\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
+ ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
(set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
- ;;
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
*)
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-}
+ esac |
+ sort
+)
echo
cat <<\_ASBOX
echo
for ac_var in $ac_subst_vars
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
_ASBOX
echo
for ac_var in $ac_subst_files
do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
## ----------- ##
_ASBOX
echo
- sed "/^$/d" confdefs.h | sort
+ cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal"
echo "$as_me: exit $exit_status"
} >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
- ' 0
+' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
# Predefined preprocessor variables.
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
if test -r "$ac_site_file"; then
{ echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
{ echo "$as_me:$LINENO: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
esac
fi
else
>$cache_file
fi
+ac_header_list="$ac_header_list fcntl.h"
+ac_func_list="$ac_func_list lstat"
+ac_header_list="$ac_header_list sys/stat.h"
+ac_header_list="$ac_header_list sys/time.h"
+ac_func_list="$ac_func_list pipe"
+ac_header_list="$ac_header_list utime.h"
+ac_func_list="$ac_func_list futimes"
+ac_func_list="$ac_func_list futimesat"
+ac_header_list="$ac_header_list limits.h"
+ac_header_list="$ac_header_list memory.h"
+ac_header_list="$ac_header_list time.h"
+ac_func_list="$ac_func_list chown"
+ac_func_list="$ac_func_list fchmod"
+ac_func_list="$ac_func_list fchown"
+ac_func_list="$ac_func_list fdopendir"
+ac_func_list="$ac_func_list siginterrupt"
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
{ (exit 1); exit 1; }; }
fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-am__api_version="1.8"
ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
+for ac_dir in build-aux "$srcdir"/build-aux; do
+ if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
- elif test -f $ac_dir/install.sh; then
+ elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
- elif test -f $ac_dir/shtool; then
+ elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in build-aux \"$srcdir\"/build-aux" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in build-aux \"$srcdir\"/build-aux" >&2;}
{ (exit 1); exit 1; }; }
fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+ac_config_headers="$ac_config_headers lib/config.h:lib/config.hin"
+
+am__api_version='1.10'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
;;
esac
done
+IFS=$as_save_IFS
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
- # removed, or if the path is relative.
+ # removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
test "$program_prefix" != NONE &&
- program_transform_name="s,^,$program_prefix,;$program_transform_name"
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $. echo might interpret backslashes.
# By default was `s,x,x', remove it if useless.
cat <<\_ACEOF >conftest.sed
s/[\\$]/&&/g;s/;s,x,x,$//
_ACEOF
program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+rm -f conftest.sed
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # Keeping the `.' argument allows $(mkdir_p) to be used without
- # argument. Indeed, we sometimes output rules like
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined.
- # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more
- # expensive solution, as it forces Make to start a sub-shell.)
- mkdir_p='mkdir -p -- .'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
else
- mkdir_p='$(install_sh) -d'
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
fi
fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_AWK+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+ { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
test -n "$AWK" && break
done
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
all:
- @echo 'ac_maketemp="$(MAKE)"'
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
rm -f conftest.make
fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
SET_MAKE=
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
fi
rmdir .tst 2>/dev/null
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
+ fi
fi
# test whether we have cygpath
# Define the identity of the package.
PACKAGE='gzip'
- VERSION='1.3.5'
+ VERSION='1.3.9'
cat >>confdefs.h <<_ACEOF
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- STRIP=$ac_ct_STRIP
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
else
STRIP="$ac_cv_prog_STRIP"
fi
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval=$enable_dependency_tracking;
+fi
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
- ac_config_headers="$ac_config_headers config.h"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- CC=$ac_ct_CC
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
+ fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
done
done
+IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
+ for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
- for ac_prog in cl
+ for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
test -n "$ac_ct_CC" && break
done
- CC=$ac_ct_CC
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
fi
fi
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort. b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions. Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link_default") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
- ;;
- conftest.$ac_ext )
- # This is the source file.
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
break;;
* )
break;;
esac
done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
else
+ ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-# Check the compiler produces executables we can run. If not, either
+# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
fi
fi
fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
+# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- export ac_cv_exeext
break;;
* ) break;;
esac
fi
rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
}
_ACEOF
rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_compiler_gnu=no
+ ac_compiler_gnu=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat >conftest.$ac_ext <<_ACEOF
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_stdc=no
+ CFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
+ as 'x'. The following induces an error, until -std is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
+ that's true only with -std. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
return 0;
}
_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
*)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
+ CC="$CC $ac_cv_prog_cc_c89"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
esac
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
- ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
depcc="$CC" am_compiler_list=
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
fi
fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
+ case $ac_cv_prog_cc_stdc in
+ no) ac_cv_prog_cc_c99=no; ac_cv_prog_cc_c89=no ;;
+ *) { echo "$as_me:$LINENO: checking for $CC option to accept ISO C99" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C99... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c99+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
+ ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <stdio.h>
+
+// Check varargs macros. These examples are taken from C99 6.10.3.5.
+#define debug(...) fprintf (stderr, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+ int x = 1234;
+ int y = 5678;
+ debug ("Flag");
+ debug ("X = %d\n", x);
+ showlist (The first, second, and third items.);
+ report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+ your preprocessor is broken;
+#endif
+#if BIG_OK
+#else
+ your preprocessor is broken;
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+ int datasize;
+ double data[];
+};
+
+struct named_init {
+ int number;
+ const wchar_t *name;
+ double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+ // See if C++-style comments work.
+ // Iterate through items via the restricted pointer.
+ // Also check for declarations in for loops.
+ for (unsigned int i = 0; *(text+i) != '\0'; ++i)
+ continue;
+ return 0;
+}
+
+// Check varargs and va_copy.
+static void
+test_varargs (const char *format, ...)
+{
+ va_list args;
+ va_start (args, format);
+ va_list args_copy;
+ va_copy (args_copy, args);
+
+ const char *str;
+ int number;
+ float fnumber;
+
+ while (*format)
+ {
+ switch (*format++)
+ {
+ case 's': // string
+ str = va_arg (args_copy, const char *);
+ break;
+ case 'd': // int
+ number = va_arg (args_copy, int);
+ break;
+ case 'f': // float
+ fnumber = va_arg (args_copy, double);
+ break;
+ default:
+ break;
+ }
+ }
+ va_end (args_copy);
+ va_end (args);
+}
+
+int
+main ()
+{
+
+ // Check bool.
+ _Bool success = false;
+
+ // Check restrict.
+ if (test_restrict ("String literal") == 0)
+ success = true;
+ char *restrict newvar = "Another string";
+
+ // Check varargs.
+ test_varargs ("s, d' f .", "string", 65, 34.234);
+ test_varargs_macros ();
+
+ // Check flexible array members.
+ struct incomplete_array *ia =
+ malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+ ia->datasize = 10;
+ for (int i = 0; i < ia->datasize; ++i)
+ ia->data[i] = i * 1.234;
+
+ // Check named initializers.
+ struct named_init ni = {
+ .number = 34,
+ .name = L"Test wide string",
+ .average = 543.34343,
+ };
+
+ ni.number = 58;
+
+ int dynamic_array[ni.number];
+ dynamic_array[ni.number - 1] = 543;
+
+ // work around unused variable warnings
+ return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
+ || dynamic_array[ni.number - 1] != 543);
+
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -std=gnu99 -c99 -qlanglvl=extc99
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c99=$ac_arg
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c99" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c99"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c99" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c99" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c99" != xno; then
+ ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99
+else
+ { echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then
+ ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89
+else
+ ac_cv_prog_cc_stdc=no
+fi
+
+
+fi
+
+ ;;
+esac
+ { echo "$as_me:$LINENO: checking for $CC option to accept ISO Standard C" >&5
+echo $ECHO_N "checking for $CC option to accept ISO Standard C... $ECHO_C" >&6; }
+ if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+
+ case $ac_cv_prog_cc_stdc in
+ no) { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
+ '') { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ *) { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6; } ;;
+esac
+
+
+if test "x$CC" != xcc; then
+ { echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+echo $ECHO_N "checking whether $CC and cc understand -c and -o together... $ECHO_C" >&6; }
+else
+ { echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+echo $ECHO_N "checking whether cc understands -c and -o together... $ECHO_C" >&6; }
+fi
+set dummy $CC; ac_cc=`echo $2 |
+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.$ac_ext >&5'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+ rm -f conftest2.*
+ if { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ test -f conftest2.$ac_objext && { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+
+cat >>confdefs.h <<\_ACEOF
+#define NO_MINUS_C_MINUS_O 1
+_ACEOF
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
echo "$as_me: failed program was:" >&5
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
else
ac_cv_prog_CPP=$CPP
fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
#endif
Syntax error
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
:
else
echo "$as_me: failed program was:" >&5
# Broken: fails on valid input.
continue
fi
+
rm -f conftest.err conftest.$ac_ext
- # OK, works on sane cases. Now check whether non-existent headers
+ # OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
# Broken: success on invalid input.
continue
else
ac_preproc_ok=:
break
fi
+
rm -f conftest.err conftest.$ac_ext
done
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nm; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NM="${ac_tool_prefix}nm"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ { echo "$as_me:$LINENO: result: $NM" >&5
+echo "${ECHO_T}$NM" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NM"; then
+ ac_ct_NM=$NM
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_NM"; then
+ ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NM="nm"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NM=$ac_cv_prog_ac_ct_NM
+if test -n "$ac_ct_NM"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_NM" >&5
+echo "${ECHO_T}$ac_ct_NM" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_NM" = x; then
+ NM="nm"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ NM=$ac_ct_NM
+ fi
+else
+ NM="$ac_cv_prog_NM"
+fi
+
+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6; }
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
else
- echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
-echo "$as_me:$LINENO: checking for a POSIX-compliant shell" >&5
-echo $ECHO_N "checking for a POSIX-compliant shell... $ECHO_C" >&6
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+{ echo "$as_me:$LINENO: checking for a POSIX-compliant shell" >&5
+echo $ECHO_N "checking for a POSIX-compliant shell... $ECHO_C" >&6; }
if test "${ac_cv_path_shell+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
esac
fi
- echo "$as_me:$LINENO: result: $ac_cv_path_shell" >&5
-echo "${ECHO_T}$ac_cv_path_shell" >&6
+ { echo "$as_me:$LINENO: result: $ac_cv_path_shell" >&5
+echo "${ECHO_T}$ac_cv_path_shell" >&6; }
SHELL=$ac_cv_path_shell
if test "$SHELL" = no; then
SHELL=/bin/sh
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
+cat >>confdefs.h <<\_ACEOF
+#define _GNU_SOURCE 1
+_ACEOF
+
+
+
+
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ # Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_GREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
+ ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ # Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ ac_count=`expr $ac_count + 1`
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+ $ac_path_EGREP_found && break 3
+ done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ ac_cv_path_EGREP=$EGREP
fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
+
+
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
-echo "$as_me:$LINENO: checking for AIX" >&5
-echo $ECHO_N "checking for AIX... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for AIX" >&5
+echo $ECHO_N "checking for AIX... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
$EGREP "yes" >/dev/null 2>&1; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
cat >>confdefs.h <<\_ACEOF
#define _ALL_SOURCE 1
_ACEOF
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
rm -f conftest*
-
-cat >>confdefs.h <<\_ACEOF
-#define _GNU_SOURCE 1
-_ACEOF
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_header_stdc=no
+ ac_cv_header_stdc=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ctype.h>
+#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
|| toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
+ return 2;
+ return 0;
}
_ACEOF
rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
( exit $ac_status )
ac_cv_header_stdc=no
fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
+
+
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then
cat >>confdefs.h <<\_ACEOF
inttypes.h stdint.h unistd.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_Header=no"
+ eval "$as_ac_Header=no"
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
if test "${ac_cv_header_minix_config_h+set}" = set; then
- echo "$as_me:$LINENO: checking for minix/config.h" >&5
-echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for minix/config.h" >&5
+echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6; }
if test "${ac_cv_header_minix_config_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
+echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking minix/config.h usability" >&5
-echo $ECHO_N "checking minix/config.h usability... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking minix/config.h usability" >&5
+echo $ECHO_N "checking minix/config.h usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
#include <minix/config.h>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
-echo "$as_me:$LINENO: checking minix/config.h presence" >&5
-echo $ECHO_N "checking minix/config.h presence... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking minix/config.h presence" >&5
+echo $ECHO_N "checking minix/config.h presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
/* end confdefs.h. */
#include <minix/config.h>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
+ ( cat <<\_ASBOX
## ------------------------------- ##
## Report this to bug-gzip@gnu.org ##
## ------------------------------- ##
_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-echo "$as_me:$LINENO: checking for minix/config.h" >&5
-echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for minix/config.h" >&5
+echo $ECHO_N "checking for minix/config.h... $ECHO_C" >&6; }
if test "${ac_cv_header_minix_config_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_header_minix_config_h=$ac_header_preproc
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
+echo "${ECHO_T}$ac_cv_header_minix_config_h" >&6; }
fi
if test $ac_cv_header_minix_config_h = yes; then
fi
-# Check whether --enable-largefile or --disable-largefile was given.
-if test "${enable_largefile+set}" = set; then
- enableval="$enable_largefile"
-fi;
-if test "$enable_largefile" != no; then
- echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
-echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6
-if test "${ac_cv_sys_largefile_CC+set}" = set; then
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5
+echo $ECHO_N "checking whether it is safe to define __EXTENSIONS__... $ECHO_C" >&6; }
+if test "${ac_cv_safe_to_define___extensions__+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_cv_sys_largefile_CC=no
- if test "$GCC" != yes; then
- ac_save_CC=$CC
- while :; do
- # IRIX 6.2 and later do not support large files by default,
- # so use the C compiler's -n32 option if that helps.
- cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <sys/types.h>
- /* Check that off_t can represent 2**63 - 1 correctly.
- We can't simply define LARGE_OFF_T to be 9223372036854775807,
- since some C++ compilers masquerading as C compilers
- incorrectly reject 9223372036854775807. */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
- int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
- && LARGE_OFF_T % 2147483647 == 1)
- ? 1 : -1];
+
+# define __EXTENSIONS__ 1
+ $ac_includes_default
int
main ()
{
return 0;
}
_ACEOF
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_safe_to_define___extensions__=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_safe_to_define___extensions__=no
fi
-rm -f conftest.err conftest.$ac_objext
- CC="$CC -n32"
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5
+echo "${ECHO_T}$ac_cv_safe_to_define___extensions__" >&6; }
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ cat >>confdefs.h <<\_ACEOF
+#define __EXTENSIONS__ 1
+_ACEOF
+
+ cat >>confdefs.h <<\_ACEOF
+#define _POSIX_PTHREAD_SEMANTICS 1
+_ACEOF
+
+ cat >>confdefs.h <<\_ACEOF
+#define _TANDEM_SOURCE 1
+_ACEOF
+
+
+
+
+
+
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then
+ enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+ { echo "$as_me:$LINENO: checking for special C compiler options needed for large files" >&5
+echo $ECHO_N "checking for special C compiler options needed for large files... $ECHO_C" >&6; }
+if test "${ac_cv_sys_largefile_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_sys_largefile_CC=' -n32'; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
break
done
CC=$ac_save_CC
rm -f conftest.$ac_ext
fi
fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
-echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_sys_largefile_CC" >&5
+echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6; }
if test "$ac_cv_sys_largefile_CC" != no; then
CC=$CC$ac_cv_sys_largefile_CC
fi
- echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
-echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6
+ { echo "$as_me:$LINENO: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6; }
if test "${ac_cv_sys_file_offset_bits+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
while :; do
- ac_cv_sys_file_offset_bits=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_file_offset_bits=no; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_sys_file_offset_bits=64; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
break
done
fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
-echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6
-if test "$ac_cv_sys_file_offset_bits" != no; then
-
+{ echo "$as_me:$LINENO: result: $ac_cv_sys_file_offset_bits" >&5
+echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
cat >>confdefs.h <<_ACEOF
#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
_ACEOF
-
-fi
+;;
+esac
rm -f conftest*
- echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
-echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { echo "$as_me:$LINENO: checking for _LARGE_FILES value needed for large files" >&5
+echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6; }
if test "${ac_cv_sys_large_files+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
while :; do
- ac_cv_sys_large_files=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_sys_large_files=no; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_sys_large_files=1; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
break
done
fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
-echo "${ECHO_T}$ac_cv_sys_large_files" >&6
-if test "$ac_cv_sys_large_files" != no; then
-
+{ echo "$as_me:$LINENO: result: $ac_cv_sys_large_files" >&5
+echo "${ECHO_T}$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
cat >>confdefs.h <<_ACEOF
#define _LARGE_FILES $ac_cv_sys_large_files
_ACEOF
-
-fi
+;;
+esac
rm -f conftest*
+ fi
fi
-# cc -E produces incorrect asm files on SVR4, we must use /lib/cpp.
-test -z "$ASCPP" && test -f /lib/cpp && ASCPP=/lib/cpp
-test -z "$ASCPP" && ASCPP="$CPP"
-
-echo "$as_me:$LINENO: checking for underline in external names" >&5
-echo $ECHO_N "checking for underline in external names... $ECHO_C" >&6
-if test "${gzip_cv_underline+set}" = set; then
+{ echo "$as_me:$LINENO: checking whether strerror_r is declared" >&5
+echo $ECHO_N "checking whether strerror_r is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_strerror_r+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- gzip_cv_underline=yes
- cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-int foo() {return 0;}
+$ac_includes_default
int
main ()
{
+#ifndef strerror_r
+ (void) strerror_r;
+#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- nm conftest.$OBJEXT | grep _foo >/dev/null 2>&1 ||
- gzip_cv_underline=no
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl_strerror_r=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_have_decl_strerror_r=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $gzip_cv_underline" >&5
-echo "${ECHO_T}$gzip_cv_underline" >&6
-if test $gzip_cv_underline = no; then
- ASCPP="${ASCPP} -DNO_UNDERLINE"
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_strerror_r" >&5
+echo "${ECHO_T}$ac_cv_have_decl_strerror_r" >&6; }
+if test $ac_cv_have_decl_strerror_r = yes; then
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRERROR_R 1
+_ACEOF
-# Try to assemble match.S.
-# "gcc -E match.s" ignores -E, so we must use match.S.
-echo "$as_me:$LINENO: checking for assembler" >&5
-echo $ECHO_N "checking for assembler... $ECHO_C" >&6
-if test "${gzip_cv_assembler+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- gzip_cv_assembler=no
- case " $DEFS " in
- *' NO_ASM '*) ;;
- *)
- if cp $srcdir/match.c _match.S &&
- eval "$ASCPP _match.S > _match.s 2>/dev/null"; then
- if test ! -s _match.s || grep error < _match.s > /dev/null; then
- :
- elif eval "$CC -c _match.s >/dev/null 2>&1" &&
- test -f _match.$OBJEXT; then
- gzip_cv_assembler=yes
- fi
- fi
- rm -f _match.S _match.s _match.$OBJEXT;;
- esac
-fi
-echo "$as_me:$LINENO: result: $gzip_cv_assembler" >&5
-echo "${ECHO_T}$gzip_cv_assembler" >&6
-if test $gzip_cv_assembler = yes; then
-cat >>confdefs.h <<\_ACEOF
-#define ASMV
+else
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRERROR_R 0
_ACEOF
- case $LIBOBJS in
- "match.$ac_objext" | \
- *" match.$ac_objext" | \
- "match.$ac_objext "* | \
- *" match.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS match.$ac_objext" ;;
-esac
fi
-echo "$as_me:$LINENO: checking for library containing strerror" >&5
-echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6
-if test "${ac_cv_search_strerror+set}" = set; then
+
+
+for ac_func in strerror_r
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_func_search_save_LIBS=$LIBS
-ac_cv_search_strerror=no
-cat >conftest.$ac_ext <<_ACEOF
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char strerror ();
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$ac_func || defined __stub___$ac_func
+choke me
+#endif
+
int
main ()
{
-strerror ();
+return $ac_func ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_strerror="none required"
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+ eval "$as_ac_var=no"
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_strerror" = no; then
- for ac_lib in cposix; do
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- cat >conftest.$ac_ext <<_ACEOF
+fi
+ac_res=`eval echo '${'$as_ac_var'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+{ echo "$as_me:$LINENO: checking whether strerror_r returns char *" >&5
+echo $ECHO_N "checking whether strerror_r returns char *... $ECHO_C" >&6; }
+if test "${ac_cv_func_strerror_r_char_p+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ ac_cv_func_strerror_r_char_p=no
+ if test $ac_cv_have_decl_strerror_r = yes; then
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char strerror ();
+$ac_includes_default
int
main ()
{
-strerror ();
+
+ char buf[100];
+ char x = *strerror_r (0, buf, sizeof buf);
+ char *p = strerror_r (0, buf, sizeof buf);
+ return !p || x;
+
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_strerror="-l$ac_lib"
-break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_func_strerror_r_char_p=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5
-echo "${ECHO_T}$ac_cv_search_strerror" >&6
-if test "$ac_cv_search_strerror" != no; then
- test "$ac_cv_search_strerror" = "none required" || LIBS="$ac_cv_search_strerror $LIBS"
fi
-echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
-if test "${ac_cv_c_const+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ else
+ # strerror_r is not declared. Choose between
+ # systems that have relatively inaccessible declarations for the
+ # function. BeOS and DEC UNIX 4.0 fall in this category, but the
+ # former has a strerror_r that returns char*, while the latter
+ # has a strerror_r that returns `int'.
+ # This test should segfault on the DEC system.
+ if test "$cross_compiling" = yes; then
+ :
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-
+$ac_includes_default
+ extern char *strerror_r ();
int
main ()
{
-/* FIXME: Include the comments suggested by Paul. */
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this. */
- typedef int charset[2];
- const charset x;
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *ccp;
- char **p;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- ccp = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++ccp;
- p = (char**) ccp;
- ccp = (char const *const *) p;
- { /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- }
-#endif
-
+char buf[100];
+ char x = *strerror_r (0, buf, sizeof buf);
+ return ! isalpha (x);
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_c_const=yes
+ ac_cv_func_strerror_r_char_p=yes
else
- echo "$as_me: failed program was:" >&5
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_c_const=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
-echo "${ECHO_T}$ac_cv_c_const" >&6
-if test $ac_cv_c_const = no; then
+
+
+ fi
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_func_strerror_r_char_p" >&5
+echo "${ECHO_T}$ac_cv_func_strerror_r_char_p" >&6; }
+if test $ac_cv_func_strerror_r_char_p = yes; then
cat >>confdefs.h <<\_ACEOF
-#define const
+#define STRERROR_R_CHAR_P 1
_ACEOF
fi
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
+
+
+
+
+for ac_header in $ac_header_list
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
else
- cat >conftest.$ac_ext <<_ACEOF
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
+$ac_includes_default
+#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_header_stdc=yes
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then
- :
-else
- ac_cv_header_stdc=no
+ ac_header_compiler=no
fi
-rm -f conftest*
-fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then
- :
-else
- cat >conftest.$ac_ext <<_ACEOF
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- exit(2);
- exit (0);
-}
+#include <$ac_header>
_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
else
- echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
+ echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
+ ac_header_preproc=no
fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to bug-gzip@gnu.org ##
+## ------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
+done
+ if test -z "$GETOPT_H"; then
-
-for ac_header in fcntl.h limits.h memory.h \
- sys/utime.h time.h utime.h
+for ac_header in getopt.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
- echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
else
# Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_header_compiler=no
+ ac_header_compiler=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
ac_header_preproc=no
fi
+
rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
- (
- cat <<\_ASBOX
+ ( cat <<\_ASBOX
## ------------------------------- ##
## Report this to bug-gzip@gnu.org ##
## ------------------------------- ##
_ASBOX
- ) |
- sed "s/^/$as_me: WARNING: /" >&2
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
+else
+ GETOPT_H=getopt.h
fi
done
+ fi
+ if test -z "$GETOPT_H"; then
-for ac_func in lstat utime
+for ac_func in getopt_long_only
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
#undef $ac_func
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
-{
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+#if defined __stub_$ac_func || defined __stub___$ac_func
choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
#endif
int
main ()
{
-return f != $ac_func;
+return $ac_func ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_var=no"
+ eval "$as_ac_var=no"
fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+ac_res=`eval echo '${'$as_ac_var'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_var'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
+else
+ GETOPT_H=getopt.h
fi
done
+ fi
-for ac_func in rpmatch
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
+ if test -z "$GETOPT_H"; then
+ { echo "$as_me:$LINENO: checking whether optreset is declared" >&5
+echo $ECHO_N "checking whether optreset is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_optreset+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
+#include <getopt.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
+int
+main ()
{
+#ifndef optreset
+ (void) optreset;
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
+
+ ;
+ return 0;
}
-#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl_optreset=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_decl_optreset=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_optreset" >&5
+echo "${ECHO_T}$ac_cv_have_decl_optreset" >&6; }
+if test $ac_cv_have_decl_optreset = yes; then
+ GETOPT_H=getopt.h
+fi
+
+ fi
+
+ if test -z "$GETOPT_H"; then
+ { echo "$as_me:$LINENO: checking for working GNU getopt function" >&5
+echo $ECHO_N "checking for working GNU getopt function... $ECHO_C" >&6; }
+if test "${gl_cv_func_gnu_getopt+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ { echo "$as_me:$LINENO: checking whether getopt_clip is declared" >&5
+echo $ECHO_N "checking whether getopt_clip is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_getopt_clip+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <getopt.h>
int
main ()
{
-return f != $ac_func;
+#ifndef getopt_clip
+ (void) getopt_clip;
+#endif
+
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_var=yes"
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl_getopt_clip=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
+ ac_cv_have_decl_getopt_clip=no
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
- cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_getopt_clip" >&5
+echo "${ECHO_T}$ac_cv_have_decl_getopt_clip" >&6; }
+if test $ac_cv_have_decl_getopt_clip = yes; then
+ gl_cv_func_gnu_getopt=no
else
- case $LIBOBJS in
- "$ac_func.$ac_objext" | \
- *" $ac_func.$ac_objext" | \
- "$ac_func.$ac_objext "* | \
- *" $ac_func.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;;
-esac
-
+ gl_cv_func_gnu_getopt=yes
fi
-done
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <getopt.h>
+int
+main ()
+{
+ char *myargv[3];
+ myargv[0] = "conftest";
+ myargv[1] = "-+";
+ myargv[2] = 0;
+ return getopt (2, myargv, "+a") != '?';
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gl_cv_func_gnu_getopt=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+( exit $ac_status )
+gl_cv_func_gnu_getopt=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+{ echo "$as_me:$LINENO: result: $gl_cv_func_gnu_getopt" >&5
+echo "${ECHO_T}$gl_cv_func_gnu_getopt" >&6; }
+ if test "$gl_cv_func_gnu_getopt" = "no"; then
+ GETOPT_H=getopt.h
+ fi
+ fi
-ac_header_dirent=no
-for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
- as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
-echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether getenv is declared" >&5
+echo $ECHO_N "checking whether getenv is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_getenv+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-#include <sys/types.h>
-#include <$ac_hdr>
-
+$ac_includes_default
int
main ()
{
-if ((DIR *) 0)
-return 0;
+#ifndef getenv
+ (void) getenv;
+#endif
+
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- eval "$as_ac_Header=yes"
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl_getenv=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-eval "$as_ac_Header=no"
+ ac_cv_have_decl_getenv=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_getenv" >&5
+echo "${ECHO_T}$ac_cv_have_decl_getenv" >&6; }
+if test $ac_cv_have_decl_getenv = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_GETENV 1
+_ACEOF
+
+
+else
cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+#define HAVE_DECL_GETENV 0
_ACEOF
-ac_header_dirent=$ac_hdr; break
+
fi
-done
-# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
-if test $ac_header_dirent = dirent.h; then
- echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
-if test "${ac_cv_search_opendir+set}" = set; then
+
+{ echo "$as_me:$LINENO: checking for inline" >&5
+echo $ECHO_N "checking for inline... $ECHO_C" >&6; }
+if test "${ac_cv_c_inline+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_func_search_save_LIBS=$LIBS
-ac_cv_search_opendir=no
-cat >conftest.$ac_ext <<_ACEOF
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_c_inline=$ac_kw
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+echo "${ECHO_T}$ac_cv_c_inline" >&6; }
+
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char opendir ();
+_ACEOF
+ ;;
+esac
+
+{ echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
+echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6; }
+if test "${ac_cv_header_stdbool_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <stdbool.h>
+ #ifndef bool
+ "error: bool is not defined"
+ #endif
+ #ifndef false
+ "error: false is not defined"
+ #endif
+ #if false
+ "error: false is not 0"
+ #endif
+ #ifndef true
+ "error: true is not defined"
+ #endif
+ #if true != 1
+ "error: true is not 1"
+ #endif
+ #ifndef __bool_true_false_are_defined
+ "error: __bool_true_false_are_defined is not defined"
+ #endif
+
+ struct s { _Bool s: 1; _Bool t; } s;
+
+ char a[true == 1 ? 1 : -1];
+ char b[false == 0 ? 1 : -1];
+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+ char d[(bool) 0.5 == true ? 1 : -1];
+ bool e = &s;
+ char f[(_Bool) 0.0 == false ? 1 : -1];
+ char g[true];
+ char h[sizeof (_Bool)];
+ char i[sizeof s.t];
+ enum { j = false, k = true, l = false * true, m = true * 256 };
+ _Bool n[m];
+ char o[sizeof n == m * sizeof n[0] ? 1 : -1];
+ char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
+ #if defined __xlc__ || defined __GNUC__
+ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0
+ reported by James Lemley on 2005-10-05; see
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
+ This test is not quite right, since xlc is allowed to
+ reject this program, as the initializer for xlcbug is
+ not one of the forms that C requires support for.
+ However, doing the test right would require a run-time
+ test, and that would make cross-compilation harder.
+ Let us hope that IBM fixes the xlc bug, and also adds
+ support for this kind of constant expression. In the
+ meantime, this test will reject xlc, which is OK, since
+ our stdbool.h substitute should suffice. We also test
+ this with GCC, where it should work, to detect more
+ quickly whether someone messes up the test in the
+ future. */
+ char digs[] = "0123456789";
+ int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1);
+ #endif
+ /* Catch a bug in an HP-UX C compiler. See
+ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+ */
+ _Bool q = true;
+ _Bool *pq = &q;
+
int
main ()
{
-opendir ();
+
+ *pq |= q;
+ *pq |= ! q;
+ /* Refer to every declared value, to avoid compiler optimizations. */
+ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
+ + !m + !n + !o + !p + !q + !pq);
+
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir="none required"
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_stdbool_h=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+ ac_cv_header_stdbool_h=no
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_opendir" = no; then
- for ac_lib in dir; do
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- cat >conftest.$ac_ext <<_ACEOF
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
+echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6; }
+ { echo "$as_me:$LINENO: checking for _Bool" >&5
+echo $ECHO_N "checking for _Bool... $ECHO_C" >&6; }
+if test "${ac_cv_type__Bool+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
+$ac_includes_default
+typedef _Bool ac__type_new_;
+int
+main ()
+{
+if ((ac__type_new_ *) 0)
+ return 0;
+if (sizeof (ac__type_new_))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type__Bool=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_type__Bool=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
+echo "${ECHO_T}$ac_cv_type__Bool" >&6; }
+if test $ac_cv_type__Bool = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE__BOOL 1
+_ACEOF
+
+
+fi
+
+ if test $ac_cv_header_stdbool_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_STDBOOL_H 1
+_ACEOF
+
+ fi
+
+
+
+
+for ac_func in $ac_func_list
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
+if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$ac_func || defined __stub___$ac_func
+choke me
+#endif
+
+int
+main ()
+{
+return $ac_func ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ eval "$as_ac_var=no"
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+ac_res=`eval echo '${'$as_ac_var'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+{ echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5
+echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6; }
+if test "${ac_cv_header_stat_broken+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if defined S_ISBLK && defined S_IFDIR
+extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1];
+#endif
+
+#if defined S_ISBLK && defined S_IFCHR
+extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1];
+#endif
+
+#if defined S_ISLNK && defined S_IFREG
+extern char c3[S_ISLNK (S_IFREG) ? -1 : 1];
+#endif
+
+#if defined S_ISSOCK && defined S_IFREG
+extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1];
+#endif
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_stat_broken=no
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_stat_broken=yes
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5
+echo "${ECHO_T}$ac_cv_header_stat_broken" >&6; }
+if test $ac_cv_header_stat_broken = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STAT_MACROS_BROKEN 1
+_ACEOF
+
+fi
+
+
+
+{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; }
+if test "${ac_cv_header_time+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_time=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_time=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
+echo "${ECHO_T}$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TIME_WITH_SYS_TIME 1
+_ACEOF
+
+fi
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking determine whether the utimes function works" >&5
+echo $ECHO_N "checking determine whether the utimes function works... $ECHO_C" >&6; }
+if test "${gl_cv_func_working_utimes+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ if test "$cross_compiling" = yes; then
+ gl_cv_func_working_utimes=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/time.h>
+#include <time.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <utime.h>
+
+int
+main ()
+{
+ static struct timeval timeval[2] = {{9, 10}, {999999, 999999}};
+ struct stat sbuf;
+ char const *file = "conftest.utimes";
+ FILE *f;
+ time_t now;
+ int fd;
+
+ int ok = ((f = fopen (file, "w"))
+ && fclose (f) == 0
+ && utimes (file, timeval) == 0
+ && lstat (file, &sbuf) == 0
+ && sbuf.st_atime == timeval[0].tv_sec
+ && sbuf.st_mtime == timeval[1].tv_sec);
+ unlink (file);
+ if (!ok)
+ exit (1);
+
+ ok =
+ ((f = fopen (file, "w"))
+ && fclose (f) == 0
+ && time (&now) != (time_t)-1
+ && utimes (file, NULL) == 0
+ && lstat (file, &sbuf) == 0
+ && now - sbuf.st_atime <= 2
+ && now - sbuf.st_mtime <= 2);
+ unlink (file);
+ if (!ok)
+ exit (1);
+
+ ok = (0 <= (fd = open (file, O_WRONLY|O_CREAT, 0444))
+ && close (fd) == 0
+ && utimes (file, NULL) == 0);
+ unlink (file);
+
+ exit (!ok);
+}
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gl_cv_func_working_utimes=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+gl_cv_func_working_utimes=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $gl_cv_func_working_utimes" >&5
+echo "${ECHO_T}$gl_cv_func_working_utimes" >&6; }
+
+ if test $gl_cv_func_working_utimes = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_WORKING_UTIMES 1
+_ACEOF
+
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking for struct utimbuf" >&5
+echo $ECHO_N "checking for struct utimbuf... $ECHO_C" >&6; }
+if test "${fu_cv_sys_struct_utimbuf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#ifdef TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# ifdef HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+#endif
+#ifdef HAVE_UTIME_H
+# include <utime.h>
+#endif
+
+int
+main ()
+{
+static struct utimbuf x; x.actime = x.modtime;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ fu_cv_sys_struct_utimbuf=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ fu_cv_sys_struct_utimbuf=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ echo "$as_me:$LINENO: result: $fu_cv_sys_struct_utimbuf" >&5
+echo "${ECHO_T}$fu_cv_sys_struct_utimbuf" >&6; }
+
+ if test $fu_cv_sys_struct_utimbuf = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_STRUCT_UTIMBUF 1
+_ACEOF
+
+ fi
+
+
+
+
+
+
+
+
+
+ if false; then
+ GL_COND_LIBTOOL_TRUE=
+ GL_COND_LIBTOOL_FALSE='#'
+else
+ GL_COND_LIBTOOL_TRUE='#'
+ GL_COND_LIBTOOL_FALSE=
+fi
+
+ gl_cond_libtool=false
+ gl_libdeps=
+ gl_ltlibdeps=
+ gl_source_base='.#bootmp/lib'
+
+ { echo "$as_me:$LINENO: checking for error_at_line" >&5
+echo $ECHO_N "checking for error_at_line... $ECHO_C" >&6; }
+if test "${ac_cv_lib_error_at_line+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <error.h>
+int
+main ()
+{
+error_at_line (0, 0, "", 0, "an error occurred");
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_lib_error_at_line=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_lib_error_at_line=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_error_at_line" >&5
+echo "${ECHO_T}$ac_cv_lib_error_at_line" >&6; }
+if test $ac_cv_lib_error_at_line = no; then
+ gl_LIBOBJS="$gl_LIBOBJS error.$ac_objext"
+fi
+
+
+
+ :
+
+
+
+ gl_LIBOBJS="$gl_LIBOBJS exitfail.$ac_objext"
+
+ :
+
+
+ { echo "$as_me:$LINENO: checking for working fcntl.h" >&5
+echo $ECHO_N "checking for working fcntl.h... $ECHO_C" >&6; }
+if test "${gl_cv_header_working_fcntl_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ gl_cv_header_working_fcntl_h=cross-compiling
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #ifndef O_NOATIME
+ #define O_NOATIME 0
+ #endif
+ #ifndef O_NOFOLLOW
+ #define O_NOFOLLOW 0
+ #endif
+ static int const constants[] =
+ {
+ O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
+ O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
+ };
+
+int
+main ()
+{
+
+ int status = !constants;
+ {
+ static char const sym[] = "conftest.sym";
+ if (symlink (".", sym) != 0
+ || close (open (sym, O_RDONLY | O_NOFOLLOW)) == 0)
+ status |= 32;
+ }
+ {
+ static char const file[] = "confdefs.h";
+ int fd = open (file, O_RDONLY | O_NOATIME);
+ char c;
+ struct stat st0, st1;
+ if (fd < 0
+ || fstat (fd, &st0) != 0
+ || sleep (1) != 0
+ || read (fd, &c, 1) != 1
+ || close (fd) != 0
+ || stat (file, &st1) != 0
+ || st0.st_atime != st1.st_atime)
+ status |= 64;
+ }
+ return status;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gl_cv_header_working_fcntl_h=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+case $? in #(
+ 32) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
+ 64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
+ 96) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
+ *) gl_cv_header_working_fcntl_h='no';;
+ esac
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $gl_cv_header_working_fcntl_h" >&5
+echo "${ECHO_T}$gl_cv_header_working_fcntl_h" >&6; }
+
+ case $gl_cv_header_working_fcntl_h in #(
+ *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
+ *) ac_val=1;;
+ esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_WORKING_O_NOATIME $ac_val
+_ACEOF
+
+
+ case $gl_cv_header_working_fcntl_h in #(
+ *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
+ *) ac_val=1;;
+ esac
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_WORKING_O_NOFOLLOW $ac_val
+_ACEOF
+
+
+ { echo "$as_me:$LINENO: checking absolute name of <fcntl.h>" >&5
+echo $ECHO_N "checking absolute name of <fcntl.h>... $ECHO_C" >&6; }
+if test "${gl_cv_absolute_fcntl_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+
+
+
+ if test $ac_cv_header_fcntl_h = yes; then
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <fcntl.h>
+_ACEOF
+ gl_cv_absolute_fcntl_h=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+sed -n '\#/fcntl.h#{s#.*"\(.*/fcntl.h\)".*#\1#;s#^/[^/]#//&#;p;q;}'`
+ fi
+
+fi
+{ echo "$as_me:$LINENO: result: $gl_cv_absolute_fcntl_h" >&5
+echo "${ECHO_T}$gl_cv_absolute_fcntl_h" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define ABSOLUTE_FCNTL_H "$gl_cv_absolute_fcntl_h"
+_ACEOF
+
+
+ ABSOLUTE_FCNTL_H=\"$gl_cv_absolute_fcntl_h\"
+
+ FCNTL_H='fcntl.h'
+
+
+
+ gl_LIBOBJS="$gl_LIBOBJS open-safer.$ac_objext"
+ gl_LIBOBJS="$gl_LIBOBJS creat-safer.$ac_objext"
+
+cat >>confdefs.h <<\_ACEOF
+#define GNULIB_FCNTL_SAFER 1
+_ACEOF
+
+
+
+
+ if test -n "$GETOPT_H"; then
+
+ gl_LIBOBJS="$gl_LIBOBJS getopt.$ac_objext"
+ gl_LIBOBJS="$gl_LIBOBJS getopt1.$ac_objext"
+
+ GETOPT_H=getopt.h
+
+cat >>confdefs.h <<\_ACEOF
+#define __GETOPT_PREFIX rpl_
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+fi
+
+
+
+
+ { echo "$as_me:$LINENO: checking whether the compiler generally respects inline" >&5
+echo $ECHO_N "checking whether the compiler generally respects inline... $ECHO_C" >&6; }
+if test "${gl_cv_c_inline_effective+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test $ac_cv_c_inline = no; then
+ gl_cv_c_inline_effective=no
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifdef __NO_INLINE__
+ #error "inline is not effective"
+ #endif
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ gl_cv_c_inline_effective=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ gl_cv_c_inline_effective=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+
+fi
+{ echo "$as_me:$LINENO: result: $gl_cv_c_inline_effective" >&5
+echo "${ECHO_T}$gl_cv_c_inline_effective" >&6; }
+ if test $gl_cv_c_inline_effective = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_INLINE 1
+_ACEOF
+
+ fi
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking for struct stat.st_atim.tv_nsec" >&5
+echo $ECHO_N "checking for struct stat.st_atim.tv_nsec... $ECHO_C" >&6; }
+if test "${ac_cv_member_struct_stat_st_atim_tv_nsec+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (ac_aggr.st_atim.tv_nsec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atim_tv_nsec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (sizeof ac_aggr.st_atim.tv_nsec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atim_tv_nsec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_member_struct_stat_st_atim_tv_nsec=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atim_tv_nsec" >&5
+echo "${ECHO_T}$ac_cv_member_struct_stat_st_atim_tv_nsec" >&6; }
+if test $ac_cv_member_struct_stat_st_atim_tv_nsec = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC 1
+_ACEOF
+
+{ echo "$as_me:$LINENO: checking whether struct stat.st_atim is of type struct timespec" >&5
+echo $ECHO_N "checking whether struct stat.st_atim is of type struct timespec... $ECHO_C" >&6; }
+if test "${ac_cv_typeof_struct_stat_st_atim_is_struct_timespec+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ #include <sys/types.h>
+ #if TIME_WITH_SYS_TIME
+ # include <sys/time.h>
+ # include <time.h>
+ #else
+ # if HAVE_SYS_TIME_H
+ # include <sys/time.h>
+ # else
+ # include <time.h>
+ # endif
+ #endif
+ #include <sys/stat.h>
+ struct timespec ts;
+ struct stat st;
+
+int
+main ()
+{
+
+ st.st_atim = ts;
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec" >&5
+echo "${ECHO_T}$ac_cv_typeof_struct_stat_st_atim_is_struct_timespec" >&6; }
+ if test $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC 1
+_ACEOF
+
+ fi
+else
+ { echo "$as_me:$LINENO: checking for struct stat.st_atimespec.tv_nsec" >&5
+echo $ECHO_N "checking for struct stat.st_atimespec.tv_nsec... $ECHO_C" >&6; }
+if test "${ac_cv_member_struct_stat_st_atimespec_tv_nsec+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (ac_aggr.st_atimespec.tv_nsec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atimespec_tv_nsec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (sizeof ac_aggr.st_atimespec.tv_nsec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atimespec_tv_nsec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_member_struct_stat_st_atimespec_tv_nsec=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atimespec_tv_nsec" >&5
+echo "${ECHO_T}$ac_cv_member_struct_stat_st_atimespec_tv_nsec" >&6; }
+if test $ac_cv_member_struct_stat_st_atimespec_tv_nsec = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC 1
+_ACEOF
+
+
+else
+ { echo "$as_me:$LINENO: checking for struct stat.st_atimensec" >&5
+echo $ECHO_N "checking for struct stat.st_atimensec... $ECHO_C" >&6; }
+if test "${ac_cv_member_struct_stat_st_atimensec+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (ac_aggr.st_atimensec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atimensec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (sizeof ac_aggr.st_atimensec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atimensec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_member_struct_stat_st_atimensec=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atimensec" >&5
+echo "${ECHO_T}$ac_cv_member_struct_stat_st_atimensec" >&6; }
+if test $ac_cv_member_struct_stat_st_atimensec = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIMENSEC 1
+_ACEOF
+
+
+else
+ { echo "$as_me:$LINENO: checking for struct stat.st_atim.st__tim.tv_nsec" >&5
+echo $ECHO_N "checking for struct stat.st_atim.st__tim.tv_nsec... $ECHO_C" >&6; }
+if test "${ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (ac_aggr.st_atim.st__tim.tv_nsec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (sizeof ac_aggr.st_atim.st__tim.tv_nsec)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" >&5
+echo "${ECHO_T}$ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" >&6; }
+if test $ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC 1
+_ACEOF
+
+
+else
+ { echo "$as_me:$LINENO: checking for struct stat.st_spare1" >&5
+echo $ECHO_N "checking for struct stat.st_spare1... $ECHO_C" >&6; }
+if test "${ac_cv_member_struct_stat_st_spare1+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (ac_aggr.st_spare1)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_spare1=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+ #include <sys/stat.h>
+
+int
+main ()
+{
+static struct stat ac_aggr;
+if (sizeof ac_aggr.st_spare1)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_member_struct_stat_st_spare1=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_member_struct_stat_st_spare1=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_spare1" >&5
+echo "${ECHO_T}$ac_cv_member_struct_stat_st_spare1" >&6; }
+if test $ac_cv_member_struct_stat_st_spare1 = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_STAT_ST_SPARE1 1
+_ACEOF
+
+
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+
+
+
+
+ # Define two additional variables used in the Makefile substitution.
+
+ if test "$ac_cv_header_stdbool_h" = yes; then
+ STDBOOL_H=''
+ else
+ STDBOOL_H='stdbool.h'
+ fi
+
+
+ if test "$ac_cv_type__Bool" = yes; then
+ HAVE__BOOL=1
+ else
+ HAVE__BOOL=0
+ fi
+
+
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking whether mkdir is declared" >&5
+echo $ECHO_N "checking whether mkdir is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/stat.h>
+
+int
+main ()
+{
+#ifndef mkdir
+ (void) mkdir;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl_mkdir=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_decl_mkdir=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_mkdir" >&5
+echo "${ECHO_T}$ac_cv_have_decl_mkdir" >&6; }
+if test $ac_cv_have_decl_mkdir = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_MKDIR 1
+_ACEOF
+
+
+else
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_MKDIR 0
+_ACEOF
+
+
+for ac_header in io.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to bug-gzip@gnu.org ##
+## ------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+fi
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking absolute name of <sys/stat.h>" >&5
+echo $ECHO_N "checking absolute name of <sys/stat.h>... $ECHO_C" >&6; }
+if test "${gl_cv_absolute_sys_stat_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+
+
+
+ if test $ac_cv_header_sys_stat_h = yes; then
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/stat.h>
+_ACEOF
+ gl_cv_absolute_sys_stat_h=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+sed -n '\#/sys/stat.h#{s#.*"\(.*/sys/stat.h\)".*#\1#;s#^/[^/]#//&#;p;q;}'`
+ fi
+
+fi
+{ echo "$as_me:$LINENO: result: $gl_cv_absolute_sys_stat_h" >&5
+echo "${ECHO_T}$gl_cv_absolute_sys_stat_h" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define ABSOLUTE_SYS_STAT_H "$gl_cv_absolute_sys_stat_h"
+_ACEOF
+
+
+ ABSOLUTE_SYS_STAT_H=\"$gl_cv_absolute_sys_stat_h\"
+
+ SYS_STAT_H='sys/stat.h'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { echo "$as_me:$LINENO: checking for struct timespec" >&5
+echo $ECHO_N "checking for struct timespec... $ECHO_C" >&6; }
+if test "${fu_cv_sys_struct_timespec+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+# if TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+# else
+# if HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+# endif
+
+int
+main ()
+{
+static struct timespec x; x.tv_sec = x.tv_nsec;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ fu_cv_sys_struct_timespec=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ fu_cv_sys_struct_timespec=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ echo "$as_me:$LINENO: result: $fu_cv_sys_struct_timespec" >&5
+echo "${ECHO_T}$fu_cv_sys_struct_timespec" >&6; }
+
+ if test $fu_cv_sys_struct_timespec = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_STRUCT_TIMESPEC 1
+_ACEOF
+
+ fi
+
+
+
+
+ { echo "$as_me:$LINENO: checking whether nanosleep is declared" >&5
+echo $ECHO_N "checking whether nanosleep is declared... $ECHO_C" >&6; }
+if test "${ac_cv_have_decl_nanosleep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <time.h>
+
+int
+main ()
+{
+#ifndef nanosleep
+ (void) nanosleep;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_have_decl_nanosleep=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_have_decl_nanosleep=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_have_decl_nanosleep" >&5
+echo "${ECHO_T}$ac_cv_have_decl_nanosleep" >&6; }
+if test $ac_cv_have_decl_nanosleep = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_NANOSLEEP 1
+_ACEOF
+
+
+else
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_NANOSLEEP 0
+_ACEOF
+
+
+fi
+
+
+
+
+
+for ac_header in unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_compiler=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+
+rm -f conftest.err conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ ( cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to bug-gzip@gnu.org ##
+## ------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+ UNISTD_H=''
+
+else
+
+ UNISTD_H='unistd.h'
+
+fi
+
+done
+
+
+
+
+
+
+
+
+
+
+ gl_LIBOBJS="$gl_LIBOBJS dup-safer.$ac_objext"
+ gl_LIBOBJS="$gl_LIBOBJS fd-safer.$ac_objext"
+ gl_LIBOBJS="$gl_LIBOBJS pipe-safer.$ac_objext"
+
+
+ gl_LIBOBJS="$gl_LIBOBJS utimens.$ac_objext"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ gl_LIBOBJS="$gl_LIBOBJS xmalloc.$ac_objext"
+
+
+
+ :
+
+
+ :
+
+
+
+ gl_LIBOBJS="$gl_LIBOBJS yesno.$ac_objext"
+
+ :
+
+ LIBGZIP_LIBDEPS="$gl_libdeps"
+
+ LIBGZIP_LTLIBDEPS="$gl_ltlibdeps"
+
+
+
+
+
+
+
+# cc -E produces incorrect asm files on SVR4, so postprocess it.
+ASCPPPOST="sed '/^ *#/d; s,//.*,,; s/% /%/g; s/\\. /./g'"
+
+
+{ echo "$as_me:$LINENO: checking for underline in external names" >&5
+echo $ECHO_N "checking for underline in external names... $ECHO_C" >&6; }
+if test "${gzip_cv_underline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gzip_cv_underline=yes
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int foo() {return 0;}
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ $NM conftest.$OBJEXT | grep _foo >/dev/null 2>&1 ||
+ gzip_cv_underline=no
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $gzip_cv_underline" >&5
+echo "${ECHO_T}$gzip_cv_underline" >&6; }
+ASCPPFLAGS=
+if test $gzip_cv_underline = no; then
+ ASCPPFLAGS='-DNO_UNDERLINE'
+fi
+
+
+
+# Try to assemble match.S.
+# "gcc -E match.s" ignores -E, so we must use _match.S.
+{ echo "$as_me:$LINENO: checking for an assembler syntax supported by this package" >&5
+echo $ECHO_N "checking for an assembler syntax supported by this package... $ECHO_C" >&6; }
+if test "${gzip_cv_assembler+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gzip_cv_assembler=no
+ case " $DEFS " in
+ *' NO_ASM '*) ;;
+ *)
+ if cp $srcdir/lib/match.c _match.S &&
+ eval "$CPP $CPPFLAGS $ASCPPFLAGS _match.S > _match.i" 2>/dev/null &&
+ eval "$ASCPPPOST < _match.i > match_.s" 2>/dev/null; then
+ if test ! -s match_.s || grep error < match_.s > /dev/null; then
+ :
+ elif eval "$CC $CPPFLAGS $CFLAGS -c match_.s >/dev/null 2>&1" &&
+ test -f match_.$OBJEXT; then
+ rm -f match_.$OBJEXT
+ gzip_cv_assembler=yes
+ if echo 'void foo (void) {}' > conftest.c &&
+ eval "$CC $CPPFLAGS $CFLAGS -S conftest.c >/dev/null 2>&1" &&
+ grep '\.note\.GNU-stack' conftest.s >/dev/null 2>&1 &&
+ eval "$CC $CPPFLAGS $CFLAGS -c -Wa,--noexecstack match_.s >/dev/null 2>&1" &&
+ test -f match_.$OBJEXT; then
+ gzip_cv_assembler='yes, with -Wa,--noexecstack'
+ fi
+ fi
+ fi
+ rm -f conftest* _match.i _match.S match_.s match_.$OBJEXT;;
+ esac
+fi
+{ echo "$as_me:$LINENO: result: $gzip_cv_assembler" >&5
+echo "${ECHO_T}$gzip_cv_assembler" >&6; }
+if test "$gzip_cv_assembler" != no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ASMV
+_ACEOF
+
+ case " $LIBOBJS " in
+ *" match.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS match.$ac_objext"
+ ;;
+esac
+
+fi
+if test "$gzip_cv_assembler" = 'yes, with -Wa,--noexecstack'; then
+ ASFLAGS_config='-Wa,--noexecstack'
+else
+ ASFLAGS_config=
+fi
+
+
+{ echo "$as_me:$LINENO: checking for library containing strerror" >&5
+echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; }
+if test "${ac_cv_search_strerror+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char strerror ();
+int
+main ()
+{
+return strerror ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' cposix; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_search_strerror=$ac_res
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext
+ if test "${ac_cv_search_strerror+set}" = set; then
+ break
+fi
+done
+if test "${ac_cv_search_strerror+set}" = set; then
+ :
+else
+ ac_cv_search_strerror=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5
+echo "${ECHO_T}$ac_cv_search_strerror" >&6; }
+ac_res=$ac_cv_search_strerror
+if test "$ac_res" != no; then
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; }
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset cs;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *pcpcc;
+ char **ppc;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ pcpcc = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++pcpcc;
+ ppc = (char**) pcpcc;
+ pcpcc = (char const *const *) ppc;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ if (s) return 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ if (!foo) return 0;
+ }
+ return !cs[0] && !zero.x;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_c_const=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_cv_header_stdc=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+
+
+fi
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
+ as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
+echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$ac_hdr>
-/* Override any gcc2 internal prototype to avoid an error. */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char opendir ();
int
main ()
{
-opendir ();
+if ((DIR *) 0)
+return 0;
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir="-l$ac_lib"
-break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+ eval "$as_ac_Header=no"
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- done
-fi
-LIBS=$ac_func_search_save_LIBS
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6
-if test "$ac_cv_search_opendir" != no; then
- test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
+ac_res=`eval echo '${'$as_ac_Header'}'`
+ { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+_ACEOF
+ac_header_dirent=$ac_hdr; break
fi
-else
- echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+ { echo "$as_me:$LINENO: checking for library containing opendir" >&5
+echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
if test "${ac_cv_search_opendir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_func_search_save_LIBS=$LIBS
-ac_cv_search_opendir=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char opendir ();
int
main ()
{
-opendir ();
+return opendir ();
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+for ac_lib in '' dir; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir="none required"
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_search_opendir=$ac_res
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_opendir" = no; then
- for ac_lib in x; do
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- cat >conftest.$ac_ext <<_ACEOF
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext
+ if test "${ac_cv_search_opendir+set}" = set; then
+ break
+fi
+done
+if test "${ac_cv_search_opendir+set}" = set; then
+ :
+else
+ ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
+echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+else
+ { echo "$as_me:$LINENO: checking for library containing opendir" >&5
+echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6; }
+if test "${ac_cv_search_opendir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-/* Override any gcc2 internal prototype to avoid an error. */
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
char opendir ();
int
main ()
{
-opendir ();
+return opendir ();
;
return 0;
}
_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>conftest.er1
+for ac_lib in '' x; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest$ac_exeext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_search_opendir="-l$ac_lib"
-break
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext &&
+ $as_test_x conftest$ac_exeext; then
+ ac_cv_search_opendir=$ac_res
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- done
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+ conftest$ac_exeext
+ if test "${ac_cv_search_opendir+set}" = set; then
+ break
+fi
+done
+if test "${ac_cv_search_opendir+set}" = set; then
+ :
+else
+ ac_cv_search_opendir=no
fi
+rm conftest.$ac_ext
LIBS=$ac_func_search_save_LIBS
fi
-echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6
-if test "$ac_cv_search_opendir" != no; then
- test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
+{ echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
+echo "${ECHO_T}$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
fi
fi
-echo "$as_me:$LINENO: checking return type of signal handlers" >&5
-echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking return type of signal handlers" >&5
+echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6; }
if test "${ac_cv_type_signal+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
/* end confdefs.h. */
#include <sys/types.h>
#include <signal.h>
-#ifdef signal
-# undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
int
main ()
{
-int i;
+return *(signal (0, 0)) (0) == 1;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_type_signal=void
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_type_signal=int
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_signal=int
+ ac_cv_type_signal=void
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
-echo "${ECHO_T}$ac_cv_type_signal" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
+echo "${ECHO_T}$ac_cv_type_signal" >&6; }
cat >>confdefs.h <<_ACEOF
#define RETSIGTYPE $ac_cv_type_signal
_ACEOF
-echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6; }
if test "${ac_cv_type_size_t+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
+typedef size_t ac__type_new_;
int
main ()
{
-if ((size_t *) 0)
+if ((ac__type_new_ *) 0)
return 0;
-if (sizeof (size_t))
+if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_type_size_t=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_size_t=no
+ ac_cv_type_size_t=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6; }
if test $ac_cv_type_size_t = yes; then
:
else
cat >>confdefs.h <<_ACEOF
-#define size_t unsigned
+#define size_t unsigned int
_ACEOF
fi
-echo "$as_me:$LINENO: checking for off_t" >&5
-echo $ECHO_N "checking for off_t... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for off_t" >&5
+echo $ECHO_N "checking for off_t... $ECHO_C" >&6; }
if test "${ac_cv_type_off_t+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
+typedef off_t ac__type_new_;
int
main ()
{
-if ((off_t *) 0)
+if ((ac__type_new_ *) 0)
return 0;
-if (sizeof (off_t))
+if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
ac_cv_type_off_t=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_type_off_t=no
+ ac_cv_type_off_t=no
fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
-echo "${ECHO_T}$ac_cv_type_off_t" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
+echo "${ECHO_T}$ac_cv_type_off_t" >&6; }
if test $ac_cv_type_off_t = yes; then
:
else
cat >>confdefs.h <<_ACEOF
-#define off_t long
+#define off_t long int
_ACEOF
fi
-echo "$as_me:$LINENO: checking whether #! works in shell scripts" >&5
-echo $ECHO_N "checking whether #! works in shell scripts... $ECHO_C" >&6
-if test "${ac_cv_sys_interpreter+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- echo '#! /bin/cat
-exit 69
-' >conftest
-chmod u+x conftest
-(SHELL=/bin/sh; export SHELL; ./conftest >/dev/null)
-if test $? -ne 69; then
- ac_cv_sys_interpreter=yes
-else
- ac_cv_sys_interpreter=no
-fi
-rm -f conftest
-fi
-echo "$as_me:$LINENO: result: $ac_cv_sys_interpreter" >&5
-echo "${ECHO_T}$ac_cv_sys_interpreter" >&6
-interpval=$ac_cv_sys_interpreter
-
-case $interpval in
-yes) SEDCMD='1d';;
-*) SEDCMD='';;
-esac
if test "x$prefix" = xNONE; then
echo $ECHO_N "checking for prefix by $ECHO_C" >&6
# Extract the first word of "gzip", so it can be a program name with args.
set dummy gzip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_ac_prefix_program+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_ac_prefix_program="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
+IFS=$as_save_IFS
;;
esac
fi
ac_prefix_program=$ac_cv_path_ac_prefix_program
-
if test -n "$ac_prefix_program"; then
- echo "$as_me:$LINENO: result: $ac_prefix_program" >&5
-echo "${ECHO_T}$ac_prefix_program" >&6
+ { echo "$as_me:$LINENO: result: $ac_prefix_program" >&5
+echo "${ECHO_T}$ac_prefix_program" >&6; }
else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
fi
+
if test -n "$ac_prefix_program"; then
- prefix=`(dirname "$ac_prefix_program") 2>/dev/null ||
+ prefix=`$as_dirname -- "$ac_prefix_program" ||
$as_expr X"$ac_prefix_program" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_prefix_program" : 'X\(//\)[^/]' \| \
X"$ac_prefix_program" : 'X\(//\)$' \| \
- X"$ac_prefix_program" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_prefix_program" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_prefix_program" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- prefix=`(dirname "$prefix") 2>/dev/null ||
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ prefix=`$as_dirname -- "$prefix" ||
$as_expr X"$prefix" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$prefix" : 'X\(//\)[^/]' \| \
X"$prefix" : 'X\(//\)$' \| \
- X"$prefix" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$prefix" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$prefix" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
fi
fi
- ac_config_files="$ac_config_files Makefile"
+
+ac_config_files="$ac_config_files Makefile doc/Makefile lib/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
+ ;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
- esac;
-} |
+ esac |
+ sort
+) |
sed '
+ /^ac_cv_env_/b end
t clear
- : clear
+ :clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- echo "not updating unwritable cache $cache_file"
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
{ { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${GL_COND_LIBTOOL_TRUE}" && test -z "${GL_COND_LIBTOOL_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"GL_COND_LIBTOOL\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GL_COND_LIBTOOL\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
+ gl_libobjs=
+ gl_ltlibobjs=
+ if test -n "$gl_LIBOBJS"; then
+ # Remove the extension.
+ sed_drop_objext='s/\.o$//;s/\.obj$//'
+ for i in `for i in $gl_LIBOBJS; do echo "$i"; done | sed "$sed_drop_objext" | sort | uniq`; do
+ gl_libobjs="$gl_libobjs $i.$ac_objext"
+ gl_ltlibobjs="$gl_ltlibobjs $i.lo"
+ done
+ fi
+ gl_LIBOBJS=$gl_libobjs
+
+ gl_LTLIBOBJS=$gl_ltlibobjs
+
+
+
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
## M4sh Initialization. ##
## --------------------- ##
-# Be Bourne compatible
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-DUALCASE=1; export DUALCASE # for MKS sh
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
fi
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
PS1='$ '
PS2='> '
PS4='+ '
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
- $as_unset $as_var
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)$' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
- /^X\/\(\/\/\)$/{ s//\1/; q; }
- /^X\/\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
+# CDPATH.
+$as_unset CDPATH
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
as_lineno_1=$LINENO
as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
N
- s,$,-,
- : loop
- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
+ s/-\n.*//
' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
-
-as_executable_p="test -f"
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
exec 6>&1
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by gzip $as_me 1.3.5, which was
-generated by GNU Autoconf 2.59. Invocation command line was
+# values after options handling.
+ac_log="
+This file was extended by gzip $as_me 1.3.9, which was
+generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
-
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
- -V, --version print version number, then exit
+ -V, --version print version number and configuration settings, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
$config_commands
Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
+_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-gzip config.status 1.3.5
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+gzip config.status 1.3.9
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
do
case $1 in
--*=*)
- ac_option=`expr "x$1" : 'x\([^=]*\)='`
- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
- -*)
+ *)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
esac
case $ac_option in
# Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
$ac_shift
CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ { echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
- *) ac_config_targets="$ac_config_targets $1" ;;
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
esac
shift
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi
_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
+_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
#
-# INIT-COMMANDS section.
+# INIT-COMMANDS
#
-
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
_ACEOF
-
-
cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
for ac_config_target in $ac_config_targets
do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ case $ac_config_target in
+ "lib/config.h") CONFIG_HEADERS="$CONFIG_HEADERS lib/config.h:lib/config.hin" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+ "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
+
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
+
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
fi
# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
-
# Create a (secure) tmp directory for tmp files.
{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
} ||
{
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
#
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@CPP@,$CPP,;t t
-s,@LN_S@,$LN_S,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@ac_prefix_program@,$ac_prefix_program,;t t
-s,@ASCPP@,$ASCPP,;t t
-s,@SEDCMD@,$SEDCMD,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+CPP!$CPP$ac_delim
+NM!$NM$ac_delim
+LN_S!$LN_S$ac_delim
+RANLIB!$RANLIB$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+GL_COND_LIBTOOL_TRUE!$GL_COND_LIBTOOL_TRUE$ac_delim
+GL_COND_LIBTOOL_FALSE!$GL_COND_LIBTOOL_FALSE$ac_delim
+ABSOLUTE_FCNTL_H!$ABSOLUTE_FCNTL_H$ac_delim
+FCNTL_H!$FCNTL_H$ac_delim
+GETOPT_H!$GETOPT_H$ac_delim
+STDBOOL_H!$STDBOOL_H$ac_delim
+HAVE__BOOL!$HAVE__BOOL$ac_delim
+ABSOLUTE_SYS_STAT_H!$ABSOLUTE_SYS_STAT_H$ac_delim
+SYS_STAT_H!$SYS_STAT_H$ac_delim
+UNISTD_H!$UNISTD_H$ac_delim
+LIBGZIP_LIBDEPS!$LIBGZIP_LIBDEPS$ac_delim
+LIBGZIP_LTLIBDEPS!$LIBGZIP_LTLIBDEPS$ac_delim
+ASCPPPOST!$ASCPPPOST$ac_delim
+ASCPPFLAGS!$ASCPPFLAGS$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+ASFLAGS_config!$ASFLAGS_config$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
-fi # test -n "$CONFIG_FILES"
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+CEOF$ac_eof
+_ACEOF
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+ac_prefix_program!$ac_prefix_program$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+gl_LIBOBJS!$gl_LIBOBJS$ac_delim
+gl_LTLIBOBJS!$gl_LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 4; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
esac
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+ ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
-
ac_builddir=.
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
case $srcdir in
- .) # No --srcdir option. We are building in place.
+ .) # We are building in place.
ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
esac
+_ACEOF
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='[ ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
esac
-
- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- # Do quote $f, to prevent DOS paths from being IFS'd.
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
- # Remove the trailing spaces.
- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h. The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status. Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless. Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments. This is necessary, for
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+_ACEOF
+
+# Transform confdefs.h into a sed script `conftest.defines', that
+# substitutes the proper values into config.h.in to produce config.h.
+rm -f conftest.defines conftest.tail
+# First, append a space to every undef/define line, to ease matching.
+echo 's/$/ /' >conftest.defines
+# Then, protect against being on the right side of a sed subst, or in
+# an unquoted here document, in config.status. If some macros were
+# called several times there might be several #defines for the same
+# symbol, which is useless. But do not sort them, since the last
+# AC_DEFINE must be honored.
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
+# NAME is the cpp macro being defined, VALUE is the value it is being given.
+# PARAMS is the parameter list in the macro definition--in most cases, it's
+# just an empty string.
+ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
+ac_dB='\\)[ (].*,\\1define\\2'
+ac_dC=' '
+ac_dD=' ,'
+
+uniq confdefs.h |
+ sed -n '
+ t rset
+ :rset
+ s/^[ ]*#[ ]*define[ ][ ]*//
+ t ok
+ d
+ :ok
+ s/[\\&,]/\\&/g
+ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
+ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
+ ' >>conftest.defines
+
+# Remove the space that was appended to ease matching.
+# Then replace #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo ' :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
+# (The regexp can be short, since the line contains either #define or #undef.)
+echo 's/ $//
+s,^[ #]*u.*,/* & */,' >>conftest.defines
+
+# Break up conftest.defines:
+ac_max_sed_lines=50
+
+# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
+# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
+# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
+# et cetera.
+ac_in='$ac_file_inputs'
+ac_out='"$tmp/out1"'
+ac_nxt='"$tmp/out2"'
+
+while :
do
- # Write a limited-size here document to $tmp/defines.sed.
- echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#define' lines.
- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+ # Write a here document:
+ cat >>$CONFIG_STATUS <<_ACEOF
+ # First, check the format of the line:
+ cat >"\$tmp/defines.sed" <<\\CEOF
+/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
+/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
+b
+:def
+_ACEOF
+ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
- sed -f $tmp/defines.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
+ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
+ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
+ grep . conftest.tail >/dev/null || break
rm -f conftest.defines
mv conftest.tail conftest.defines
done
-rm -f conftest.defines
-echo ' fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
- # Write a limited-size here document to $tmp/undefs.sed.
- echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
- # Speed up: don't consider the non `#undef'
- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
- # Work around the forget-to-reset-the-flag bug.
- echo 't clr' >>$CONFIG_STATUS
- echo ': clr' >>$CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
- echo 'CEOF
- sed -f $tmp/undefs.sed $tmp/in >$tmp/out
- rm -f $tmp/in
- mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
- rm -f conftest.undefs
- mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
+rm -f conftest.defines conftest.tail
+echo "ac_result=$ac_in" >>$CONFIG_STATUS
cat >>$CONFIG_STATUS <<\_ACEOF
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- echo "/* Generated by configure. */" >$tmp/config.h
- else
- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
- fi
- cat $tmp/in >>$tmp/config.h
- rm -f $tmp/in
if test x"$ac_file" != x-; then
- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+ echo "/* $configure_input */" >"$tmp/config.h"
+ cat "$ac_result" >>"$tmp/config.h"
+ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
{ echo "$as_me:$LINENO: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
rm -f $ac_file
- mv $tmp/config.h $ac_file
+ mv "$tmp/config.h" $ac_file
fi
else
- cat $tmp/config.h
- rm -f $tmp/config.h
+ echo "/* $configure_input */"
+ cat "$ac_result"
fi
+ rm -f "$tmp/out12"
# Compute $ac_file's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X$ac_file : 'X\(//\)[^/]' \| \
X$ac_file : 'X\(//\)$' \| \
- X$ac_file : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
echo X$ac_file |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X\(//\)[^/]' \| \
- X"$ac_dest" : 'X\(//\)$' \| \
- X"$ac_dest" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
else
continue
fi
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
+ fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p $dirpart/$fdir
- else
- as_dir=$dirpart/$fdir
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir=$dirpart/$fdir
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| \
- . : '\(.\)' 2>/dev/null ||
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X\(\/\/\)[^/].*/{ s//\1/; q; }
- /^X\(\/\/\)$/{ s//\1/; q; }
- /^X\(\/\).*/{ s//\1/; q; }
- s/.*/./; q'`
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
-
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
;;
+
esac
-done
-_ACEOF
+done # for ac_tag
-cat >>$CONFIG_STATUS <<\_ACEOF
{ (exit 0); exit 0; }
_ACEOF
--- /dev/null
+# Configure template for gzip.
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2006 Free Software Foundation, Inc.
+# Copyright (C) 1992-1993 Jean-loup Gailly
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_PREREQ([2.60])
+AC_INIT([gzip], [1.3.9], [bug-gzip@gnu.org])
+AC_CONFIG_SRCDIR(gzip.c)
+AC_CONFIG_AUX_DIR(build-aux)
+AC_CONFIG_HEADERS([lib/config.h:lib/config.hin])
+AM_INIT_AUTOMAKE([gnits])
+
+AC_PROG_CC_STDC
+AM_PROG_CC_C_O
+AC_PROG_CPP
+AC_CHECK_TOOL([NM], [nm], [nm])
+AC_PROG_LN_S
+AC_PROG_RANLIB
+AC_PROG_SHELL
+
+gl_EARLY
+AC_SYS_LARGEFILE
+
+gl_INIT
+
+# cc -E produces incorrect asm files on SVR4, so postprocess it.
+ASCPPPOST="sed '/^ *#/d; s,//.*,,; s/% /%/g; s/\\. /./g'"
+AC_SUBST([ASCPPPOST])
+
+AC_CACHE_CHECK([for underline in external names], [gzip_cv_underline],
+ [gzip_cv_underline=yes
+ AC_TRY_COMPILE([int foo() {return 0;}], [],
+ [$NM conftest.$OBJEXT | grep _foo >/dev/null 2>&1 ||
+ gzip_cv_underline=no])])
+ASCPPFLAGS=
+if test $gzip_cv_underline = no; then
+ ASCPPFLAGS='-DNO_UNDERLINE'
+fi
+AC_SUBST([ASCPPFLAGS])
+AC_OBJEXT
+
+# Try to assemble match.S.
+# "gcc -E match.s" ignores -E, so we must use _match.S.
+AC_CACHE_CHECK([for an assembler syntax supported by this package],
+ [gzip_cv_assembler],
+ [gzip_cv_assembler=no
+ case " $DEFS " in
+ *' NO_ASM '*) ;;
+ *)
+ if cp $srcdir/lib/match.c _match.S &&
+ eval "$CPP $CPPFLAGS $ASCPPFLAGS _match.S > _match.i" 2>/dev/null &&
+ eval "$ASCPPPOST < _match.i > match_.s" 2>/dev/null; then
+ if test ! -s match_.s || grep error < match_.s > /dev/null; then
+ :
+ elif eval "$CC $CPPFLAGS $CFLAGS -c match_.s >/dev/null 2>&1" &&
+ test -f match_.$OBJEXT; then
+ rm -f match_.$OBJEXT
+ gzip_cv_assembler=yes
+ if echo 'void foo (void) {}' > conftest.c &&
+ eval "$CC $CPPFLAGS $CFLAGS -S conftest.c >/dev/null 2>&1" &&
+ grep '\.note\.GNU-stack' conftest.s >/dev/null 2>&1 &&
+ eval "$CC $CPPFLAGS $CFLAGS -c -Wa,--noexecstack match_.s >/dev/null 2>&1" &&
+ test -f match_.$OBJEXT; then
+ gzip_cv_assembler='yes, with -Wa,--noexecstack'
+ fi
+ fi
+ fi
+ rm -f conftest* _match.i _match.S match_.s match_.$OBJEXT;;
+ esac])
+if test "$gzip_cv_assembler" != no; then
+ AC_DEFINE(ASMV, ,
+ [Define if an assembler version of longest_match is available.])
+ AC_LIBOBJ(match)
+fi
+if test "$gzip_cv_assembler" = 'yes, with -Wa,--noexecstack'; then
+ ASFLAGS_config='-Wa,--noexecstack'
+else
+ ASFLAGS_config=
+fi
+AC_SUBST([ASFLAGS_config])
+
+AC_ISC_POSIX
+AC_C_CONST
+AC_HEADER_STDC
+AC_CHECK_HEADERS_ONCE(fcntl.h limits.h memory.h time.h)
+AC_CHECK_FUNCS_ONCE([chown fchmod fchown fdopendir lstat siginterrupt])
+AC_HEADER_DIRENT
+AC_TYPE_SIGNAL
+AC_TYPE_SIZE_T
+AC_TYPE_OFF_T
+
+AC_PREFIX_PROGRAM(gzip)
+
+AC_CONFIG_FILES([Makefile doc/Makefile lib/Makefile])
+AC_OUTPUT
+++ /dev/null
-# Configure template for gzip.
-
-# Copyright (C) 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-# Copyright (C) 1992-1993 Jean-loup Gailly
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-AC_PREREQ(2.54)
-AC_INIT(gzip, 1.3.5, bug-gzip@gnu.org)
-AC_CONFIG_SRCDIR(gzip.c)
-AM_INIT_AUTOMAKE
-
-AM_CONFIG_HEADER(config.h)
-AC_PROG_CC
-AC_PROG_CPP
-AC_PROG_LN_S
-AC_PROG_SHELL
-AC_AIX
-AC_GNU_SOURCE
-AC_MINIX
-AC_SYS_LARGEFILE
-
-# cc -E produces incorrect asm files on SVR4, we must use /lib/cpp.
-test -z "$ASCPP" && test -f /lib/cpp && ASCPP=/lib/cpp
-test -z "$ASCPP" && ASCPP="$CPP"
-
-AC_CACHE_CHECK([for underline in external names], [gzip_cv_underline],
- [gzip_cv_underline=yes
- AC_TRY_COMPILE([int foo() {return 0;}], [],
- [nm conftest.$OBJEXT | grep _foo >/dev/null 2>&1 ||
- gzip_cv_underline=no])])
-if test $gzip_cv_underline = no; then
- ASCPP="${ASCPP} -DNO_UNDERLINE"
-fi
-AC_OBJEXT
-
-# Try to assemble match.S.
-# "gcc -E match.s" ignores -E, so we must use match.S.
-AC_CACHE_CHECK([for assembler], [gzip_cv_assembler],
- [gzip_cv_assembler=no
- case " $DEFS " in
- *' NO_ASM '*) ;;
- *)
- if cp $srcdir/match.c _match.S &&
- eval "$ASCPP _match.S > _match.s 2>/dev/null"; then
- if test ! -s _match.s || grep error < _match.s > /dev/null; then
- :
- elif eval "$CC -c _match.s >/dev/null 2>&1" &&
- test -f _match.$OBJEXT; then
- gzip_cv_assembler=yes
- fi
- fi
- rm -f _match.S _match.s _match.$OBJEXT;;
- esac])
-if test $gzip_cv_assembler = yes; then
- AC_DEFINE(ASMV, ,
- [Define if an assembler version of longest_match is available.])
- AC_LIBOBJ(match)
-fi
-
-AC_ISC_POSIX
-AC_C_CONST
-AC_HEADER_STDC
-AC_CHECK_HEADERS(fcntl.h limits.h memory.h \
- sys/utime.h time.h utime.h)
-AC_CHECK_FUNCS(lstat utime)
-AC_REPLACE_FUNCS(rpmatch)
-AC_HEADER_DIRENT
-AC_TYPE_SIGNAL
-AC_TYPE_SIZE_T
-AC_TYPE_OFF_T
-AC_SYS_INTERPRETER
-case $interpval in
-yes) SEDCMD='1d';;
-*) SEDCMD='';;
-esac
-
-AC_PREFIX_PROGRAM(gzip)
-AC_SUBST(ASCPP)dnl
-AC_SUBST(SEDCMD)dnl
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
* Hardly worth copyrighting :-)
*/
#ifdef RCSID
-static char rcsid[] = "$Id: crypt.c,v 0.6 1993/03/22 09:48:47 jloup Exp $";
+static char rcsid[] = "$Id: crypt.c,v 0.7 2006/11/20 08:40:33 eggert Exp $";
#endif
+typedef int dummy;
+gzip (1.3.9-1) unstable; urgency=low
+
+ * new upstream version, closes: #366660, #403308
+ * clean up a few gratuitous differences from new upstream, leaving
+ only the rsyncable patch and tweaks like zmore always using more
+ * fix spelling error in documentation, closes: #395450
+ * upstream patch for regression uncompressing null input, closes: #403970
+
+ -- Bdale Garbee <bdale@gag.com> Wed, 20 Dec 2006 19:16:36 -0700
+
gzip (1.3.5-15) unstable; urgency=high
* security update, covering the following alerts:
dh_testroot
dh_installdocs README* TODO
dh_installmanpages
- dh_installinfo gzip.info
+ dh_installinfo doc/gzip.info
dh_installchangelogs
dh_link
dh_strip
version=2
-ftp://alpha.gnu.org/gnu/gzip/gzip-([\d\.\d]+)\.tar\.gz
+ftp://ftp.gnu.org/gnu/gzip/gzip-([\d\.\d]+)\.tar\.gz
/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1999, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
/*
* PURPOSE
#include "lzw.h" /* just for consistency checking */
#ifdef RCSID
-static char rcsid[] = "$Id: deflate.c,v 0.15 1993/06/24 10:53:53 jloup Exp $";
+static char rcsid[] = "$Id: deflate.c,v 1.5 2006/12/07 23:53:00 eggert Exp $";
#endif
/* ===========================================================================
{
register unsigned j;
- if (pack_level < 1 || pack_level > 9) error("bad pack level");
+ if (pack_level < 1 || pack_level > 9) gzip_error ("bad pack level");
compr_level = pack_level;
/* Initialize the hash table. */
fprintf(stderr,
" start %d, match %d, length %d\n",
start, match, length);
- error("invalid match");
+ gzip_error ("invalid match");
}
if (verbose > 1) {
fprintf(stderr,"\\[%d,%d]", start-match, length);
/* Find the longest match, discarding those <= prev_length.
* At this point we have always match_length < MIN_MATCH
*/
- if (hash_head != NIL && strstart - hash_head <= MAX_DIST &&
- strstart <= window_size - MIN_LOOKAHEAD) {
+ if (hash_head != NIL && strstart - hash_head <= MAX_DIST
+ && strstart <= window_size - MIN_LOOKAHEAD) {
/* To simplify the code, we prevent matches with the string
* of window index 0 (in particular we have to avoid a match
* of the string with itself at the start of the input file).
* the next lookahead bytes will be emitted as literals.
*/
} while (--match_length != 0);
- strstart++;
+ strstart++;
} else {
strstart += match_length;
match_length = 0;
flush = ct_tally (0, window[strstart]);
RSYNC_ROLL(strstart, 1);
lookahead--;
- strstart++;
+ strstart++;
}
if (rsync && strstart > rsync_chunk_end) {
rsync_chunk_end = 0xFFFFFFFFUL;
if (hash_head != NIL && prev_length < max_lazy_match &&
strstart - hash_head <= MAX_DIST &&
- strstart <= window_size - MIN_LOOKAHEAD) {
+ strstart <= window_size - MIN_LOOKAHEAD) {
/* To simplify the code, we prevent matches with the string
* of window index 0 (in particular we have to avoid a match
* of the string with itself at the start of the input file).
+++ /dev/null
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
- base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
- dir=`echo "$object" | sed 's,/.*$,/,'`
- if test "$dir" = "$object"; then
- dir=
- fi
- # FIXME: should be _deps on DOS.
- depfile="$dir.deps/$base"
-fi
-
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. This file always lives in the current directory.
- # Also, the AIX compiler puts `$object:' at the start of each line;
- # $object doesn't have directory information.
- stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- outname="$stripped.o"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 AIX compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
-
- base=`echo "$object" | sed -e 's/\.o$/.d/' -e 's/\.lo$/.d/'`
- tmpdepfile1="$base.o.d"
- tmpdepfile2="$base.d"
- if test "$libtool" = yes; then
- "$@" -Wc,-MD
- else
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- else
- tmpdepfile="$tmpdepfile2"
- fi
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a space and a tab in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- test -z "$dashmflag" && dashmflag=-M
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*) # this is libtool, let us make it quiet
- for arg
- do # cycle over the arguments
- case "$arg" in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- "$@" $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- # X makedepend
- (
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in no)
- set ""; shift
- cleared=yes
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- ( IFS=" "
- case " $* " in
- *" --mode=compile "*)
- for arg
- do # cycle over the arguments
- case $arg in
- "--mode=compile")
- # insert --quiet before "--mode=compile"
- set fnord "$@" --quiet
- shift # fnord
- ;;
- esac
- set fnord "$@" "$arg"
- shift # fnord
- shift # "$arg"
- done
- ;;
- esac
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- ) &
- proc=$!
- "$@"
- stat=$?
- wait "$proc"
- if test "$stat" != 0; then exit $stat; fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
--- /dev/null
+# Make gzip documentation. -*-Makefile-*-
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+info_TEXINFOS = gzip.texi
+
+gzip_TEXINFOS = fdl.texi
+
+AM_MAKEINFOFLAGS = --no-split
--- /dev/null
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Make gzip documentation. -*-Makefile-*-
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = doc
+DIST_COMMON = $(gzip_TEXINFOS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/stamp-vti \
+ $(srcdir)/version.texi
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \
+ $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
+ $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-safer.m4 \
+ $(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/getopt.m4 \
+ $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/inline.m4 \
+ $(top_srcdir)/m4/shell.m4 $(top_srcdir)/m4/stat-time.m4 \
+ $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
+ $(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/unistd-safer.m4 \
+ $(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/utimbuf.m4 \
+ $(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes.m4 \
+ $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/yesno.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+INFO_DEPS = $(srcdir)/gzip.info
+TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
+DVIS = gzip.dvi
+PDFS = gzip.pdf
+PSS = gzip.ps
+HTMLS = gzip.html
+TEXINFOS = gzip.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__installdirs = "$(DESTDIR)$(infodir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ABSOLUTE_FCNTL_H = @ABSOLUTE_FCNTL_H@
+ABSOLUTE_SYS_STAT_H = @ABSOLUTE_SYS_STAT_H@
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+ASCPPFLAGS = @ASCPPFLAGS@
+ASCPPPOST = @ASCPPPOST@
+ASFLAGS_config = @ASFLAGS_config@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FCNTL_H = @FCNTL_H@
+GETOPT_H = @GETOPT_H@
+GREP = @GREP@
+HAVE__BOOL = @HAVE__BOOL@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBGZIP_LIBDEPS = @LIBGZIP_LIBDEPS@
+LIBGZIP_LTLIBDEPS = @LIBGZIP_LTLIBDEPS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STDBOOL_H = @STDBOOL_H@
+STRIP = @STRIP@
+SYS_STAT_H = @SYS_STAT_H@
+UNISTD_H = @UNISTD_H@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_prefix_program = @ac_prefix_program@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+info_TEXINFOS = gzip.texi
+gzip_TEXINFOS = fdl.texi
+AM_MAKEINFOFLAGS = --no-split
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnits doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+.texi.info:
+ restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ am__cwd=`pwd` && cd $(srcdir) && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+ done; \
+ else :; fi && \
+ cd "$$am__cwd"; \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $@ $<; \
+ then \
+ rc=0; \
+ cd $(srcdir); \
+ else \
+ rc=$$?; \
+ cd $(srcdir) && \
+ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+ fi; \
+ rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+ $(TEXI2DVI) $<
+
+.texi.pdf:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+ $(TEXI2PDF) $<
+
+.texi.html:
+ rm -rf $(@:.html=.htp)
+ if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $(@:.html=.htp) $<; \
+ then \
+ rm -rf $@; \
+ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+ mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+ else \
+ if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+ rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+ exit 1; \
+ fi
+$(srcdir)/gzip.info: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
+gzip.dvi: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
+gzip.pdf: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
+gzip.html: gzip.texi $(srcdir)/version.texi $(gzip_TEXINFOS)
+$(srcdir)/version.texi: $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: gzip.texi $(top_srcdir)/configure
+ @(dir=.; test -f ./gzip.texi || dir=$(srcdir); \
+ set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gzip.texi`; \
+ echo "@set UPDATED $$1 $$2 $$3"; \
+ echo "@set UPDATED-MONTH $$2 $$3"; \
+ echo "@set EDITION $(VERSION)"; \
+ echo "@set VERSION $(VERSION)") > vti.tmp
+ @cmp -s vti.tmp $(srcdir)/version.texi \
+ || (echo "Updating $(srcdir)/version.texi"; \
+ cp vti.tmp $(srcdir)/version.texi)
+ -@rm -f vti.tmp
+ @cp $(srcdir)/version.texi $@
+
+mostlyclean-vti:
+ -rm -f vti.tmp
+
+maintainer-clean-vti:
+ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
+.dvi.ps:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) -o $@ $<
+
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
+
+uninstall-info-am:
+ @$(PRE_UNINSTALL)
+ @if test -d '$(DESTDIR)$(infodir)' && \
+ (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+ install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ done; \
+ else :; fi
+ @$(NORMAL_UNINSTALL)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
+dist-info: $(INFO_DEPS)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; \
+ for base in $$list; do \
+ case $$base in \
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f $(distdir)/$$relfile || \
+ cp -p $$file $(distdir)/$$relfile; \
+ else :; fi; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ -rm -rf gzip.aux gzip.cp gzip.cps gzip.fn gzip.fns gzip.ky gzip.kys gzip.log \
+ gzip.pg gzip.pgs gzip.tmp gzip.toc gzip.tp gzip.tps gzip.vr \
+ gzip.vrs gzip.dvi gzip.pdf gzip.ps gzip.html
+
+maintainer-clean-aminfo:
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS)
+installdirs:
+ for dir in "$(DESTDIR)$(infodir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
+ @list='$(DVIS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+ else \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+ fi; \
+ done
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ if test -f $$ifile; then \
+ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
+ echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
+ $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
+ else : ; fi; \
+ done; \
+ done
+ @$(POST_INSTALL)
+ @if (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+ done; \
+ else : ; fi
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+ @list='$(PDFS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
+ @list='$(PSS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \
+ done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+ maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-pdf-am uninstall-ps-am
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic dist-info \
+ distclean distclean-generic distdir dvi dvi-am html html-am \
+ info info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-aminfo \
+ maintainer-clean-generic maintainer-clean-vti mostlyclean \
+ mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
+ pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
+ uninstall-html-am uninstall-info-am uninstall-pdf-am \
+ uninstall-ps-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+
+@node GNU Free Documentation License
+@appendixsec GNU Free Documentation License
+
+@cindex FDL, GNU Free Documentation License
+@center Version 1.2, November 2002
+
+@display
+Copyright @copyright{} 2000,2001,2002 Free Software Foundation, Inc.
+51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+@end display
+
+@enumerate 0
+@item
+PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document @dfn{free} in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of ``copyleft'', which means that derivative
+works of the document must themselves be free in the same sense. It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does. But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book. We recommend this License
+principally for works whose purpose is instruction or reference.
+
+@item
+APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License. Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein. The ``Document'', below,
+refers to any such manual or work. Any member of the public is a
+licensee, and is addressed as ``you''. You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A ``Modified Version'' of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A ``Secondary Section'' is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject. (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.) The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The ``Invariant Sections'' are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License. If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant. The Document may contain zero
+Invariant Sections. If the Document does not identify any Invariant
+Sections then there are none.
+
+The ``Cover Texts'' are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License. A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A ``Transparent'' copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters. A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text. A copy that is not ``Transparent'' is called ``Opaque''.
+
+Examples of suitable formats for Transparent copies include plain
+@sc{ascii} without markup, Texinfo input format, La@TeX{} input
+format, @acronym{SGML} or @acronym{XML} using a publicly available
+@acronym{DTD}, and standard-conforming simple @acronym{HTML},
+PostScript or @acronym{PDF} designed for human modification. Examples
+of transparent image formats include @acronym{PNG}, @acronym{XCF} and
+@acronym{JPG}. Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, @acronym{SGML} or
+@acronym{XML} for which the @acronym{DTD} and/or processing tools are
+not generally available, and the machine-generated @acronym{HTML},
+PostScript or @acronym{PDF} produced by some word processors for
+output purposes only.
+
+The ``Title Page'' means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page. For works in
+formats which do not have any title page as such, ``Title Page'' means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+A section ``Entitled XYZ'' means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language. (Here XYZ stands for a
+specific section name mentioned below, such as ``Acknowledgements'',
+``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title''
+of such a section when you modify the Document means that it remains a
+section ``Entitled XYZ'' according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document. These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+@item
+VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License. You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute. However, you may accept
+compensation in exchange for copies. If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+@item
+COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover. Both covers must also clearly and legibly identify
+you as the publisher of these copies. The front cover must present
+the full title with all words of the title equally prominent and
+visible. You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+@item
+MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it. In addition, you must do these things in the Modified Version:
+
+@enumerate A
+@item
+Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document). You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+@item
+List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+@item
+State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+@item
+Preserve all the copyright notices of the Document.
+
+@item
+Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+@item
+Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+@item
+Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document's license notice.
+
+@item
+Include an unaltered copy of this License.
+
+@item
+Preserve the section Entitled ``History'', Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page. If
+there is no section Entitled ``History'' in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+@item
+Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on. These may be placed in the ``History'' section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+@item
+For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+@item
+Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles. Section numbers
+or the equivalent are not considered part of the section titles.
+
+@item
+Delete any section Entitled ``Endorsements''. Such a section
+may not be included in the Modified Version.
+
+@item
+Do not retitle any existing section to be Entitled ``Endorsements'' or
+to conflict in title with any Invariant Section.
+
+@item
+Preserve any Warranty Disclaimers.
+@end enumerate
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant. To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled ``Endorsements'', provided it contains
+nothing but endorsements of your Modified Version by various
+parties---for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version. Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity. If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+@item
+COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy. If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled ``History''
+in the various original documents, forming one section Entitled
+``History''; likewise combine any sections Entitled ``Acknowledgements'',
+and any sections Entitled ``Dedications''. You must delete all
+sections Entitled ``Endorsements.''
+
+@item
+COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+@item
+AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an ``aggregate'' if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+@item
+TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections. You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers. In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled ``Acknowledgements'',
+``Dedications'', or ``History'', the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+@item
+TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document except
+as expressly provided for under this License. Any other attempt to
+copy, modify, sublicense or distribute the Document is void, and will
+automatically terminate your rights under this License. However,
+parties who have received copies, or rights, from you under this
+License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+@item
+FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns. See
+@uref{http://www.gnu.org/copyleft/}.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License ``or any later version'' applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation. If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.
+@end enumerate
+
+@page
+@heading ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+@group
+ Copyright (C) @var{year} @var{your name}.
+ Permission is granted to copy, distribute and/or modify this document
+ under the terms of the GNU Free Documentation License, Version 1.2
+ or any later version published by the Free Software Foundation;
+ with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+ Texts. A copy of the license is included in the section entitled ``GNU
+ Free Documentation License''.
+@end group
+@end smallexample
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the ``with...Texts.'' line with this:
+
+@smallexample
+@group
+ with the Invariant Sections being @var{list their titles}, with
+ the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
+ being @var{list}.
+@end group
+@end smallexample
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
+@c Local Variables:
+@c ispell-local-pdict: "ispell-dict"
+@c End:
+
--- /dev/null
+This is gzip.info, produced by makeinfo version 4.8 from gzip.texi.
+
+ This manual is for Gzip (version 1.3.9, 8 December 2006), and
+documents commands for compressing and decompressing data.
+
+ Copyright (C) 1998, 1999, 2001, 2002, 2006 Free Software Foundation,
+Inc.
+
+ Copyright (C) 1992, 1993 Jean-loup Gailly
+
+ Permission is granted to copy, distribute and/or modify this
+ document under the terms of the GNU Free Documentation License,
+ Version 1.2 or any later version published by the Free Software
+ Foundation; with no Invariant Sections, with no Front-Cover Texts,
+ and with no Back-Cover Texts. A copy of the license is included
+ in the section entitled "GNU Free Documentation License".
+
+INFO-DIR-SECTION Individual utilities
+START-INFO-DIR-ENTRY
+* gzip: (gzip)Invoking gzip. Compress files.
+END-INFO-DIR-ENTRY
+
+INFO-DIR-SECTION Utilities
+START-INFO-DIR-ENTRY
+* Gzip: (gzip). The gzip command for compressing files.
+END-INFO-DIR-ENTRY
+
+\1f
+File: gzip.info, Node: Top, Up: (dir)
+
+Compressing Files
+*****************
+
+This manual is for Gzip (version 1.3.9, 8 December 2006), and documents
+commands for compressing and decompressing data.
+
+ Copyright (C) 1998, 1999, 2001, 2002, 2006 Free Software Foundation,
+Inc.
+
+ Copyright (C) 1992, 1993 Jean-loup Gailly
+
+ Permission is granted to copy, distribute and/or modify this
+ document under the terms of the GNU Free Documentation License,
+ Version 1.2 or any later version published by the Free Software
+ Foundation; with no Invariant Sections, with no Front-Cover Texts,
+ and with no Back-Cover Texts. A copy of the license is included
+ in the section entitled "GNU Free Documentation License".
+
+* Menu:
+
+* Overview:: Preliminary information.
+* Sample:: Sample output from `gzip'.
+* Invoking gzip:: How to run `gzip'.
+* Advanced usage:: Concatenated files.
+* Environment:: The `GZIP' environment variable
+* Tapes:: Using `gzip' on tapes.
+* Problems:: Reporting bugs.
+* Copying This Manual:: How to make copies of this manual.
+* Concept Index:: Index of concepts.
+
+\1f
+File: gzip.info, Node: Overview, Next: Sample, Up: Top
+
+1 Overview
+**********
+
+`gzip' reduces the size of the named files using Lempel-Ziv coding
+(LZ77). Whenever possible, each file is replaced by one with the
+extension `.gz', while keeping the same ownership modes, access and
+modification times. (The default extension is `-gz' for VMS, `z' for
+MSDOS, OS/2 FAT and Atari.) If no files are specified or if a file
+name is "-", the standard input is compressed to the standard output.
+`gzip' will only attempt to compress regular files. In particular, it
+will ignore symbolic links.
+
+ If the new file name is too long for its file system, `gzip'
+truncates it. `gzip' attempts to truncate only the parts of the file
+name longer than 3 characters. (A part is delimited by dots.) If the
+name consists of small parts only, the longest parts are truncated.
+For example, if file names are limited to 14 characters, gzip.msdos.exe
+is compressed to gzi.msd.exe.gz. Names are not truncated on systems
+which do not have a limit on file name length.
+
+ By default, `gzip' keeps the original file name and timestamp in the
+compressed file. These are used when decompressing the file with the
+`-N' option. This is useful when the compressed file name was truncated
+or when the time stamp was not preserved after a file transfer.
+However, due to limitations in the current `gzip' file format,
+fractional seconds are discarded. Also, time stamps must fall within
+the range 1970-01-01 00:00:00 through 2106-02-07 06:28:15 UTC, and
+hosts whose operating systems use 32-bit time stamps are further
+restricted to time stamps no later than 2038-01-19 03:14:07 UTC. The
+upper bounds assume the typical case where leap seconds are ignored.
+
+ Compressed files can be restored to their original form using `gzip
+-d' or `gunzip' or `zcat'. If the original name saved in the
+compressed file is not suitable for its file system, a new name is
+constructed from the original one to make it legal.
+
+ `gunzip' takes a list of files on its command line and replaces each
+file whose name ends with `.gz', `.z', `.Z', `-gz', `-z' or `_z' and
+which begins with the correct magic number with an uncompressed file
+without the original extension. `gunzip' also recognizes the special
+extensions `.tgz' and `.taz' as shorthands for `.tar.gz' and `.tar.Z'
+respectively. When compressing, `gzip' uses the `.tgz' extension if
+necessary instead of truncating a file with a `.tar' extension.
+
+ `gunzip' can currently decompress files created by `gzip', `zip',
+`compress' or `pack'. The detection of the input format is automatic.
+When using the first two formats, `gunzip' checks a 32 bit CRC (cyclic
+redundancy check). For `pack', `gunzip' checks the uncompressed length.
+The `compress' format was not designed to allow consistency checks.
+However `gunzip' is sometimes able to detect a bad `.Z' file. If you
+get an error when uncompressing a `.Z' file, do not assume that the
+`.Z' file is correct simply because the standard `uncompress' does not
+complain. This generally means that the standard `uncompress' does not
+check its input, and happily generates garbage output. The SCO
+`compress -H' format (`lzh' compression method) does not include a CRC
+but also allows some consistency checks.
+
+ Files created by `zip' can be uncompressed by `gzip' only if they
+have a single member compressed with the 'deflation' method. This
+feature is only intended to help conversion of `tar.zip' files to the
+`tar.gz' format. To extract a `zip' file with a single member, use a
+command like `gunzip <foo.zip' or `gunzip -S .zip foo.zip'. To extract
+`zip' files with several members, use `unzip' instead of `gunzip'.
+
+ `zcat' is identical to `gunzip -c'. `zcat' uncompresses either a
+list of files on the command line or its standard input and writes the
+uncompressed data on standard output. `zcat' will uncompress files
+that have the correct magic number whether they have a `.gz' suffix or
+not.
+
+ `gzip' uses the Lempel-Ziv algorithm used in `zip' and PKZIP. The
+amount of compression obtained depends on the size of the input and the
+distribution of common substrings. Typically, text such as source code
+or English is reduced by 60-70%. Compression is generally much better
+than that achieved by LZW (as used in `compress'), Huffman coding (as
+used in `pack'), or adaptive Huffman coding (`compact').
+
+ Compression is always performed, even if the compressed file is
+slightly larger than the original. The worst case expansion is a few
+bytes for the `gzip' file header, plus 5 bytes every 32K block, or an
+expansion ratio of 0.015% for large files. Note that the actual number
+of used disk blocks almost never increases. `gzip' normally preserves
+the mode, ownership and time stamps of files when compressing or
+decompressing.
+
+ The `gzip' file format is specified in P. Deutsch, GZIP file format
+specification version 4.3, Internet RFC 1952
+(ftp://ftp.isi.edu/in-notes/rfc1952.txt) (May 1996). The `zip'
+deflation format is specified in P. Deutsch, DEFLATE Compressed Data
+Format Specification version 1.3, Internet RFC 1951
+(ftp://ftp.isi.edu/in-notes/rfc1951.txt) (May 1996).
+
+\1f
+File: gzip.info, Node: Sample, Next: Invoking gzip, Prev: Overview, Up: Top
+
+2 Sample Output
+***************
+
+Here are some realistic examples of running `gzip'.
+
+ This is the output of the command `gzip -h':
+
+ gzip VERSION-NUMBER
+ usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
+ -c --stdout write on standard output, keep original files unchanged
+ -d --decompress decompress
+ -f --force force overwrite of output file and compress links
+ -h --help give this help
+ -l --list list compressed file contents
+ -L --license display software license
+ -n --no-name do not save or restore the original name and time stamp
+ -N --name save or restore the original name and time stamp
+ -q --quiet suppress all warnings
+ -r --recursive operate recursively on directories
+ -S .suf --suffix .suf use suffix .suf on compressed files
+ -t --test test compressed file integrity
+ -v --verbose verbose mode
+ -V --version display version number
+ -1 --fast compress faster
+ -9 --best compress better
+ file... files to (de)compress. If none given, use standard input.
+ Report bugs to <bug-gzip@gnu.org>.
+
+ This is the output of the command `gzip -v texinfo.tex':
+
+ texinfo.tex: 69.7% -- replaced with texinfo.tex.gz
+
+ The following command will find all `gzip' files in the current
+directory and subdirectories, and extract them in place without
+destroying the original:
+
+ find . -name '*.gz' -print | sed 's/^\(.*\)[.]gz$/gunzip < "&" > "\1"/' | sh
+
+\1f
+File: gzip.info, Node: Invoking gzip, Next: Advanced usage, Prev: Sample, Up: Top
+
+3 Invoking `gzip'
+*****************
+
+The format for running the `gzip' program is:
+
+ gzip OPTION ...
+
+ `gzip' supports the following options:
+
+`--stdout'
+`--to-stdout'
+`-c'
+ Write output on standard output; keep original files unchanged.
+ If there are several input files, the output consists of a
+ sequence of independently compressed members. To obtain better
+ compression, concatenate all input files before compressing them.
+
+`--decompress'
+`--uncompress'
+`-d'
+ Decompress.
+
+`--force'
+`-f'
+ Force compression or decompression even if the file has multiple
+ links or the corresponding file already exists, or if the
+ compressed data is read from or written to a terminal. If the
+ input data is not in a format recognized by `gzip', and if the
+ option `--stdout' is also given, copy the input data without
+ change to the standard output: let `zcat' behave as `cat'. If `-f'
+ is not given, and when not running in the background, `gzip'
+ prompts to verify whether an existing file should be overwritten.
+
+`--help'
+`-h'
+ Print an informative help message describing the options then quit.
+
+`--list'
+`-l'
+ For each compressed file, list the following fields:
+
+ compressed size: size of the compressed file
+ uncompressed size: size of the uncompressed file
+ ratio: compression ratio (0.0% if unknown)
+ uncompressed_name: name of the uncompressed file
+
+ The uncompressed size is given as `-1' for files not in `gzip'
+ format, such as compressed `.Z' files. To get the uncompressed
+ size for such a file, you can use:
+
+ zcat file.Z | wc -c
+
+ In combination with the `--verbose' option, the following fields
+ are also displayed:
+
+ method: compression method (deflate,compress,lzh,pack)
+ crc: the 32-bit CRC of the uncompressed data
+ date & time: time stamp for the uncompressed file
+
+ The crc is given as ffffffff for a file not in gzip format.
+
+ With `--verbose', the size totals and compression ratio for all
+ files is also displayed, unless some sizes are unknown. With
+ `--quiet', the title and totals lines are not displayed.
+
+ The `gzip' format represents the input size modulo 2^32, so the
+ uncompressed size and compression ratio are listed incorrectly for
+ uncompressed files 4 GB and larger. To work around this problem,
+ you can use the following command to discover a large uncompressed
+ file's true size:
+
+ zcat file.gz | wc -c
+
+`--license'
+`-L'
+ Display the `gzip' license then quit.
+
+`--no-name'
+`-n'
+ When compressing, do not save the original file name and time
+ stamp by default. (The original name is always saved if the name
+ had to be truncated.) When decompressing, do not restore the
+ original file name if present (remove only the `gzip' suffix from
+ the compressed file name) and do not restore the original time
+ stamp if present (copy it from the compressed file). This option
+ is the default when decompressing.
+
+`--name'
+`-N'
+ When compressing, always save the original file name and time
+ stamp; this is the default. When decompressing, restore the
+ original file name and time stamp if present. This option is
+ useful on systems which have a limit on file name length or when
+ the time stamp has been lost after a file transfer.
+
+`--quiet'
+`-q'
+ Suppress all warning messages.
+
+`--recursive'
+`-r'
+ Travel the directory structure recursively. If any of the file
+ names specified on the command line are directories, `gzip' will
+ descend into the directory and compress all the files it finds
+ there (or decompress them in the case of `gunzip').
+
+`--suffix SUF'
+`-S SUF'
+ Use suffix `SUF' instead of `.gz'. Any suffix can be given, but
+ suffixes other than `.z' and `.gz' should be avoided to avoid
+ confusion when files are transferred to other systems. A null
+ suffix forces gunzip to try decompression on all given files
+ regardless of suffix, as in:
+
+ gunzip -S "" * (*.* for MSDOS)
+
+ Previous versions of gzip used the `.z' suffix. This was changed to
+ avoid a conflict with `pack'.
+
+`--test'
+`-t'
+ Test. Check the compressed file integrity.
+
+`--verbose'
+`-v'
+ Verbose. Display the name and percentage reduction for each file
+ compressed.
+
+`--version'
+`-V'
+ Version. Display the version number and compilation options, then
+ quit.
+
+`--fast'
+`--best'
+`-N'
+ Regulate the speed of compression using the specified digit N,
+ where `-1' or `--fast' indicates the fastest compression method
+ (less compression) and `--best' or `-9' indicates the slowest
+ compression method (optimal compression). The default compression
+ level is `-6' (that is, biased towards high compression at expense
+ of speed).
+
+\1f
+File: gzip.info, Node: Advanced usage, Next: Environment, Prev: Invoking gzip, Up: Top
+
+4 Advanced usage
+****************
+
+Multiple compressed files can be concatenated. In this case, `gunzip'
+will extract all members at once. If one member is damaged, other
+members might still be recovered after removal of the damaged member.
+Better compression can be usually obtained if all members are
+decompressed and then recompressed in a single step.
+
+ This is an example of concatenating `gzip' files:
+
+ gzip -c file1 > foo.gz
+ gzip -c file2 >> foo.gz
+
+ Then
+
+ gunzip -c foo
+
+ is equivalent to
+
+ cat file1 file2
+
+ In case of damage to one member of a `.gz' file, other members can
+still be recovered (if the damaged member is removed). However, you can
+get better compression by compressing all members at once:
+
+ cat file1 file2 | gzip > foo.gz
+
+ compresses better than
+
+ gzip -c file1 file2 > foo.gz
+
+ If you want to recompress concatenated files to get better
+compression, do:
+
+ zcat old.gz | gzip > new.gz
+
+ If a compressed file consists of several members, the uncompressed
+size and CRC reported by the `--list' option applies to the last member
+only. If you need the uncompressed size for all members, you can use:
+
+ zcat file.gz | wc -c
+
+ If you wish to create a single archive file with multiple members so
+that members can later be extracted independently, use an archiver such
+as `tar' or `zip'. GNU `tar' supports the `-z' option to invoke `gzip'
+transparently. `gzip' is designed as a complement to `tar', not as a
+replacement.
+
+\1f
+File: gzip.info, Node: Environment, Next: Tapes, Prev: Advanced usage, Up: Top
+
+5 Environment
+*************
+
+The environment variable `GZIP' can hold a set of default options for
+`gzip'. These options are interpreted first and can be overwritten by
+explicit command line parameters. For example:
+
+ for sh: GZIP="-8v --name"; export GZIP
+ for csh: setenv GZIP "-8v --name"
+ for MSDOS: set GZIP=-8v --name
+
+ On Vax/VMS, the name of the environment variable is `GZIP_OPT', to
+avoid a conflict with the symbol set for invocation of the program.
+
+\1f
+File: gzip.info, Node: Tapes, Next: Problems, Prev: Environment, Up: Top
+
+6 Using `gzip' on tapes
+***********************
+
+When writing compressed data to a tape, it is generally necessary to pad
+the output with zeroes up to a block boundary. When the data is read and
+the whole block is passed to `gunzip' for decompression, `gunzip'
+detects that there is extra trailing garbage after the compressed data
+and emits a warning by default if the garbage contains nonzero bytes.
+You have to use the `--quiet' option to suppress the warning. This
+option can be set in the `GZIP' environment variable, as in:
+
+ for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
+ for csh: (setenv GZIP "-q"; tar -xfz --block-compress /dev/rst0)
+
+ In the above example, `gzip' is invoked implicitly by the `-z'
+option of GNU `tar'. Make sure that the same block size (`-b' option
+of `tar') is used for reading and writing compressed data on tapes.
+(This example assumes you are using the GNU version of `tar'.)
+
+\1f
+File: gzip.info, Node: Problems, Next: Copying This Manual, Prev: Tapes, Up: Top
+
+7 Reporting Bugs
+****************
+
+If you find a bug in `gzip', please send electronic mail to
+<bug-gzip@gnu.org>. Include the version number, which you can find by
+running `gzip -V'. Also include in your message the hardware and
+operating system, the compiler used to compile `gzip', a description of
+the bug behavior, and the input to `gzip' that triggered the bug.
+
+\1f
+File: gzip.info, Node: Copying This Manual, Next: Concept Index, Prev: Problems, Up: Top
+
+Appendix A Copying This Manual
+******************************
+
+* Menu:
+
+* GNU Free Documentation License:: License for copying this manual.
+
+\1f
+File: gzip.info, Node: GNU Free Documentation License, Up: Copying This Manual
+
+A.1 GNU Free Documentation License
+==================================
+
+ Version 1.2, November 2002
+
+ Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
+
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ 0. PREAMBLE
+
+ The purpose of this License is to make a manual, textbook, or other
+ functional and useful document "free" in the sense of freedom: to
+ assure everyone the effective freedom to copy and redistribute it,
+ with or without modifying it, either commercially or
+ noncommercially. Secondarily, this License preserves for the
+ author and publisher a way to get credit for their work, while not
+ being considered responsible for modifications made by others.
+
+ This License is a kind of "copyleft", which means that derivative
+ works of the document must themselves be free in the same sense.
+ It complements the GNU General Public License, which is a copyleft
+ license designed for free software.
+
+ We have designed this License in order to use it for manuals for
+ free software, because free software needs free documentation: a
+ free program should come with manuals providing the same freedoms
+ that the software does. But this License is not limited to
+ software manuals; it can be used for any textual work, regardless
+ of subject matter or whether it is published as a printed book.
+ We recommend this License principally for works whose purpose is
+ instruction or reference.
+
+ 1. APPLICABILITY AND DEFINITIONS
+
+ This License applies to any manual or other work, in any medium,
+ that contains a notice placed by the copyright holder saying it
+ can be distributed under the terms of this License. Such a notice
+ grants a world-wide, royalty-free license, unlimited in duration,
+ to use that work under the conditions stated herein. The
+ "Document", below, refers to any such manual or work. Any member
+ of the public is a licensee, and is addressed as "you". You
+ accept the license if you copy, modify or distribute the work in a
+ way requiring permission under copyright law.
+
+ A "Modified Version" of the Document means any work containing the
+ Document or a portion of it, either copied verbatim, or with
+ modifications and/or translated into another language.
+
+ A "Secondary Section" is a named appendix or a front-matter section
+ of the Document that deals exclusively with the relationship of the
+ publishers or authors of the Document to the Document's overall
+ subject (or to related matters) and contains nothing that could
+ fall directly within that overall subject. (Thus, if the Document
+ is in part a textbook of mathematics, a Secondary Section may not
+ explain any mathematics.) The relationship could be a matter of
+ historical connection with the subject or with related matters, or
+ of legal, commercial, philosophical, ethical or political position
+ regarding them.
+
+ The "Invariant Sections" are certain Secondary Sections whose
+ titles are designated, as being those of Invariant Sections, in
+ the notice that says that the Document is released under this
+ License. If a section does not fit the above definition of
+ Secondary then it is not allowed to be designated as Invariant.
+ The Document may contain zero Invariant Sections. If the Document
+ does not identify any Invariant Sections then there are none.
+
+ The "Cover Texts" are certain short passages of text that are
+ listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+ that says that the Document is released under this License. A
+ Front-Cover Text may be at most 5 words, and a Back-Cover Text may
+ be at most 25 words.
+
+ A "Transparent" copy of the Document means a machine-readable copy,
+ represented in a format whose specification is available to the
+ general public, that is suitable for revising the document
+ straightforwardly with generic text editors or (for images
+ composed of pixels) generic paint programs or (for drawings) some
+ widely available drawing editor, and that is suitable for input to
+ text formatters or for automatic translation to a variety of
+ formats suitable for input to text formatters. A copy made in an
+ otherwise Transparent file format whose markup, or absence of
+ markup, has been arranged to thwart or discourage subsequent
+ modification by readers is not Transparent. An image format is
+ not Transparent if used for any substantial amount of text. A
+ copy that is not "Transparent" is called "Opaque".
+
+ Examples of suitable formats for Transparent copies include plain
+ ASCII without markup, Texinfo input format, LaTeX input format,
+ SGML or XML using a publicly available DTD, and
+ standard-conforming simple HTML, PostScript or PDF designed for
+ human modification. Examples of transparent image formats include
+ PNG, XCF and JPG. Opaque formats include proprietary formats that
+ can be read and edited only by proprietary word processors, SGML or
+ XML for which the DTD and/or processing tools are not generally
+ available, and the machine-generated HTML, PostScript or PDF
+ produced by some word processors for output purposes only.
+
+ The "Title Page" means, for a printed book, the title page itself,
+ plus such following pages as are needed to hold, legibly, the
+ material this License requires to appear in the title page. For
+ works in formats which do not have any title page as such, "Title
+ Page" means the text near the most prominent appearance of the
+ work's title, preceding the beginning of the body of the text.
+
+ A section "Entitled XYZ" means a named subunit of the Document
+ whose title either is precisely XYZ or contains XYZ in parentheses
+ following text that translates XYZ in another language. (Here XYZ
+ stands for a specific section name mentioned below, such as
+ "Acknowledgements", "Dedications", "Endorsements", or "History".)
+ To "Preserve the Title" of such a section when you modify the
+ Document means that it remains a section "Entitled XYZ" according
+ to this definition.
+
+ The Document may include Warranty Disclaimers next to the notice
+ which states that this License applies to the Document. These
+ Warranty Disclaimers are considered to be included by reference in
+ this License, but only as regards disclaiming warranties: any other
+ implication that these Warranty Disclaimers may have is void and
+ has no effect on the meaning of this License.
+
+ 2. VERBATIM COPYING
+
+ You may copy and distribute the Document in any medium, either
+ commercially or noncommercially, provided that this License, the
+ copyright notices, and the license notice saying this License
+ applies to the Document are reproduced in all copies, and that you
+ add no other conditions whatsoever to those of this License. You
+ may not use technical measures to obstruct or control the reading
+ or further copying of the copies you make or distribute. However,
+ you may accept compensation in exchange for copies. If you
+ distribute a large enough number of copies you must also follow
+ the conditions in section 3.
+
+ You may also lend copies, under the same conditions stated above,
+ and you may publicly display copies.
+
+ 3. COPYING IN QUANTITY
+
+ If you publish printed copies (or copies in media that commonly
+ have printed covers) of the Document, numbering more than 100, and
+ the Document's license notice requires Cover Texts, you must
+ enclose the copies in covers that carry, clearly and legibly, all
+ these Cover Texts: Front-Cover Texts on the front cover, and
+ Back-Cover Texts on the back cover. Both covers must also clearly
+ and legibly identify you as the publisher of these copies. The
+ front cover must present the full title with all words of the
+ title equally prominent and visible. You may add other material
+ on the covers in addition. Copying with changes limited to the
+ covers, as long as they preserve the title of the Document and
+ satisfy these conditions, can be treated as verbatim copying in
+ other respects.
+
+ If the required texts for either cover are too voluminous to fit
+ legibly, you should put the first ones listed (as many as fit
+ reasonably) on the actual cover, and continue the rest onto
+ adjacent pages.
+
+ If you publish or distribute Opaque copies of the Document
+ numbering more than 100, you must either include a
+ machine-readable Transparent copy along with each Opaque copy, or
+ state in or with each Opaque copy a computer-network location from
+ which the general network-using public has access to download
+ using public-standard network protocols a complete Transparent
+ copy of the Document, free of added material. If you use the
+ latter option, you must take reasonably prudent steps, when you
+ begin distribution of Opaque copies in quantity, to ensure that
+ this Transparent copy will remain thus accessible at the stated
+ location until at least one year after the last time you
+ distribute an Opaque copy (directly or through your agents or
+ retailers) of that edition to the public.
+
+ It is requested, but not required, that you contact the authors of
+ the Document well before redistributing any large number of
+ copies, to give them a chance to provide you with an updated
+ version of the Document.
+
+ 4. MODIFICATIONS
+
+ You may copy and distribute a Modified Version of the Document
+ under the conditions of sections 2 and 3 above, provided that you
+ release the Modified Version under precisely this License, with
+ the Modified Version filling the role of the Document, thus
+ licensing distribution and modification of the Modified Version to
+ whoever possesses a copy of it. In addition, you must do these
+ things in the Modified Version:
+
+ A. Use in the Title Page (and on the covers, if any) a title
+ distinct from that of the Document, and from those of
+ previous versions (which should, if there were any, be listed
+ in the History section of the Document). You may use the
+ same title as a previous version if the original publisher of
+ that version gives permission.
+
+ B. List on the Title Page, as authors, one or more persons or
+ entities responsible for authorship of the modifications in
+ the Modified Version, together with at least five of the
+ principal authors of the Document (all of its principal
+ authors, if it has fewer than five), unless they release you
+ from this requirement.
+
+ C. State on the Title page the name of the publisher of the
+ Modified Version, as the publisher.
+
+ D. Preserve all the copyright notices of the Document.
+
+ E. Add an appropriate copyright notice for your modifications
+ adjacent to the other copyright notices.
+
+ F. Include, immediately after the copyright notices, a license
+ notice giving the public permission to use the Modified
+ Version under the terms of this License, in the form shown in
+ the Addendum below.
+
+ G. Preserve in that license notice the full lists of Invariant
+ Sections and required Cover Texts given in the Document's
+ license notice.
+
+ H. Include an unaltered copy of this License.
+
+ I. Preserve the section Entitled "History", Preserve its Title,
+ and add to it an item stating at least the title, year, new
+ authors, and publisher of the Modified Version as given on
+ the Title Page. If there is no section Entitled "History" in
+ the Document, create one stating the title, year, authors,
+ and publisher of the Document as given on its Title Page,
+ then add an item describing the Modified Version as stated in
+ the previous sentence.
+
+ J. Preserve the network location, if any, given in the Document
+ for public access to a Transparent copy of the Document, and
+ likewise the network locations given in the Document for
+ previous versions it was based on. These may be placed in
+ the "History" section. You may omit a network location for a
+ work that was published at least four years before the
+ Document itself, or if the original publisher of the version
+ it refers to gives permission.
+
+ K. For any section Entitled "Acknowledgements" or "Dedications",
+ Preserve the Title of the section, and preserve in the
+ section all the substance and tone of each of the contributor
+ acknowledgements and/or dedications given therein.
+
+ L. Preserve all the Invariant Sections of the Document,
+ unaltered in their text and in their titles. Section numbers
+ or the equivalent are not considered part of the section
+ titles.
+
+ M. Delete any section Entitled "Endorsements". Such a section
+ may not be included in the Modified Version.
+
+ N. Do not retitle any existing section to be Entitled
+ "Endorsements" or to conflict in title with any Invariant
+ Section.
+
+ O. Preserve any Warranty Disclaimers.
+
+ If the Modified Version includes new front-matter sections or
+ appendices that qualify as Secondary Sections and contain no
+ material copied from the Document, you may at your option
+ designate some or all of these sections as invariant. To do this,
+ add their titles to the list of Invariant Sections in the Modified
+ Version's license notice. These titles must be distinct from any
+ other section titles.
+
+ You may add a section Entitled "Endorsements", provided it contains
+ nothing but endorsements of your Modified Version by various
+ parties--for example, statements of peer review or that the text
+ has been approved by an organization as the authoritative
+ definition of a standard.
+
+ You may add a passage of up to five words as a Front-Cover Text,
+ and a passage of up to 25 words as a Back-Cover Text, to the end
+ of the list of Cover Texts in the Modified Version. Only one
+ passage of Front-Cover Text and one of Back-Cover Text may be
+ added by (or through arrangements made by) any one entity. If the
+ Document already includes a cover text for the same cover,
+ previously added by you or by arrangement made by the same entity
+ you are acting on behalf of, you may not add another; but you may
+ replace the old one, on explicit permission from the previous
+ publisher that added the old one.
+
+ The author(s) and publisher(s) of the Document do not by this
+ License give permission to use their names for publicity for or to
+ assert or imply endorsement of any Modified Version.
+
+ 5. COMBINING DOCUMENTS
+
+ You may combine the Document with other documents released under
+ this License, under the terms defined in section 4 above for
+ modified versions, provided that you include in the combination
+ all of the Invariant Sections of all of the original documents,
+ unmodified, and list them all as Invariant Sections of your
+ combined work in its license notice, and that you preserve all
+ their Warranty Disclaimers.
+
+ The combined work need only contain one copy of this License, and
+ multiple identical Invariant Sections may be replaced with a single
+ copy. If there are multiple Invariant Sections with the same name
+ but different contents, make the title of each such section unique
+ by adding at the end of it, in parentheses, the name of the
+ original author or publisher of that section if known, or else a
+ unique number. Make the same adjustment to the section titles in
+ the list of Invariant Sections in the license notice of the
+ combined work.
+
+ In the combination, you must combine any sections Entitled
+ "History" in the various original documents, forming one section
+ Entitled "History"; likewise combine any sections Entitled
+ "Acknowledgements", and any sections Entitled "Dedications". You
+ must delete all sections Entitled "Endorsements."
+
+ 6. COLLECTIONS OF DOCUMENTS
+
+ You may make a collection consisting of the Document and other
+ documents released under this License, and replace the individual
+ copies of this License in the various documents with a single copy
+ that is included in the collection, provided that you follow the
+ rules of this License for verbatim copying of each of the
+ documents in all other respects.
+
+ You may extract a single document from such a collection, and
+ distribute it individually under this License, provided you insert
+ a copy of this License into the extracted document, and follow
+ this License in all other respects regarding verbatim copying of
+ that document.
+
+ 7. AGGREGATION WITH INDEPENDENT WORKS
+
+ A compilation of the Document or its derivatives with other
+ separate and independent documents or works, in or on a volume of
+ a storage or distribution medium, is called an "aggregate" if the
+ copyright resulting from the compilation is not used to limit the
+ legal rights of the compilation's users beyond what the individual
+ works permit. When the Document is included in an aggregate, this
+ License does not apply to the other works in the aggregate which
+ are not themselves derivative works of the Document.
+
+ If the Cover Text requirement of section 3 is applicable to these
+ copies of the Document, then if the Document is less than one half
+ of the entire aggregate, the Document's Cover Texts may be placed
+ on covers that bracket the Document within the aggregate, or the
+ electronic equivalent of covers if the Document is in electronic
+ form. Otherwise they must appear on printed covers that bracket
+ the whole aggregate.
+
+ 8. TRANSLATION
+
+ Translation is considered a kind of modification, so you may
+ distribute translations of the Document under the terms of section
+ 4. Replacing Invariant Sections with translations requires special
+ permission from their copyright holders, but you may include
+ translations of some or all Invariant Sections in addition to the
+ original versions of these Invariant Sections. You may include a
+ translation of this License, and all the license notices in the
+ Document, and any Warranty Disclaimers, provided that you also
+ include the original English version of this License and the
+ original versions of those notices and disclaimers. In case of a
+ disagreement between the translation and the original version of
+ this License or a notice or disclaimer, the original version will
+ prevail.
+
+ If a section in the Document is Entitled "Acknowledgements",
+ "Dedications", or "History", the requirement (section 4) to
+ Preserve its Title (section 1) will typically require changing the
+ actual title.
+
+ 9. TERMINATION
+
+ You may not copy, modify, sublicense, or distribute the Document
+ except as expressly provided for under this License. Any other
+ attempt to copy, modify, sublicense or distribute the Document is
+ void, and will automatically terminate your rights under this
+ License. However, parties who have received copies, or rights,
+ from you under this License will not have their licenses
+ terminated so long as such parties remain in full compliance.
+
+ 10. FUTURE REVISIONS OF THIS LICENSE
+
+ The Free Software Foundation may publish new, revised versions of
+ the GNU Free Documentation License from time to time. Such new
+ versions will be similar in spirit to the present version, but may
+ differ in detail to address new problems or concerns. See
+ `http://www.gnu.org/copyleft/'.
+
+ Each version of the License is given a distinguishing version
+ number. If the Document specifies that a particular numbered
+ version of this License "or any later version" applies to it, you
+ have the option of following the terms and conditions either of
+ that specified version or of any later version that has been
+ published (not as a draft) by the Free Software Foundation. If
+ the Document does not specify a version number of this License,
+ you may choose any version ever published (not as a draft) by the
+ Free Software Foundation.
+
+ADDENDUM: How to use this License for your documents
+====================================================
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+ Copyright (C) YEAR YOUR NAME.
+ Permission is granted to copy, distribute and/or modify this document
+ under the terms of the GNU Free Documentation License, Version 1.2
+ or any later version published by the Free Software Foundation;
+ with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+ Texts. A copy of the license is included in the section entitled ``GNU
+ Free Documentation License''.
+
+ If you have Invariant Sections, Front-Cover Texts and Back-Cover
+Texts, replace the "with...Texts." line with this:
+
+ with the Invariant Sections being LIST THEIR TITLES, with
+ the Front-Cover Texts being LIST, and with the Back-Cover Texts
+ being LIST.
+
+ If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+ If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License, to
+permit their use in free software.
+
+\1f
+File: gzip.info, Node: Concept Index, Prev: Copying This Manual, Up: Top
+
+Appendix B Concept Index
+************************
+
+\0\b[index\0\b]
+* Menu:
+
+* bugs: Problems. (line 6)
+* concatenated files: Advanced usage. (line 6)
+* Environment: Environment. (line 6)
+* FDL, GNU Free Documentation License: GNU Free Documentation License.
+ (line 6)
+* invoking: Invoking gzip. (line 6)
+* options: Invoking gzip. (line 6)
+* overview: Overview. (line 6)
+* sample: Sample. (line 6)
+* tapes: Tapes. (line 6)
+
+
+\1f
+Tag Table:
+Node: Top\7f1011
+Node: Overview\7f2133
+Node: Sample\7f7309
+Node: Invoking gzip\7f8964
+Node: Advanced usage\7f13942
+Node: Environment\7f15532
+Node: Tapes\7f16101
+Node: Problems\7f17116
+Node: Copying This Manual\7f17575
+Node: GNU Free Documentation License\7f17813
+Node: Concept Index\7f40209
+\1f
+End Tag Table
--- /dev/null
+\input texinfo @c -*-texinfo-*-
+@c %**start of header
+@setfilename gzip.info
+@include version.texi
+@settitle Gzip User's Manual
+@finalout
+@setchapternewpage odd
+@c %**end of header
+@copying
+This manual is for Gzip
+(version @value{VERSION}, @value{UPDATED}),
+and documents commands for compressing and decompressing data.
+
+Copyright @copyright{} 1998, 1999, 2001, 2002, 2006 Free Software
+Foundation, Inc.
+
+Copyright @copyright{} 1992, 1993 Jean-loup Gailly
+
+@quotation
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.2 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts. A copy of the license is included in the section entitled ``GNU
+Free Documentation License''.
+@end quotation
+@end copying
+
+@c Debian install-info (up through at least version 1.9.20) uses only the
+@c first dircategory. Put this one first, as it is more useful in practice.
+@dircategory Individual utilities
+@direntry
+* gzip: (gzip)Invoking gzip. Compress files.
+@end direntry
+
+@dircategory Utilities
+@direntry
+* Gzip: (gzip). The gzip command for compressing files.
+@end direntry
+
+@titlepage
+@title gzip
+@subtitle The data compression program
+@subtitle for Gzip Version @value{VERSION}
+@subtitle @value{UPDATED}
+@author by Jean-loup Gailly
+
+@page
+@vskip 0pt plus 1filll
+@insertcopying
+@end titlepage
+
+@contents
+
+@ifnottex
+@node Top, , , (dir)
+@top Compressing Files
+
+@insertcopying
+@end ifnottex
+
+@menu
+* Overview:: Preliminary information.
+* Sample:: Sample output from @code{gzip}.
+* Invoking gzip:: How to run @code{gzip}.
+* Advanced usage:: Concatenated files.
+* Environment:: The @code{GZIP} environment variable
+* Tapes:: Using @code{gzip} on tapes.
+* Problems:: Reporting bugs.
+* Copying This Manual:: How to make copies of this manual.
+* Concept Index:: Index of concepts.
+@end menu
+
+@node Overview, Sample, , Top
+@chapter Overview
+@cindex overview
+
+@code{gzip} reduces the size of the named files using Lempel-Ziv coding
+(LZ77). Whenever possible, each file is replaced by one with the
+extension @samp{.gz}, while keeping the same ownership modes, access and
+modification times. (The default extension is @samp{-gz} for VMS,
+@samp{z} for MSDOS, OS/2 FAT and Atari.) If no files are specified or
+if a file name is "-", the standard input is compressed to the standard
+output. @code{gzip} will only attempt to compress regular files. In
+particular, it will ignore symbolic links.
+
+If the new file name is too long for its file system, @code{gzip}
+truncates it. @code{gzip} attempts to truncate only the parts of the
+file name longer than 3 characters. (A part is delimited by dots.) If
+the name consists of small parts only, the longest parts are truncated.
+For example, if file names are limited to 14 characters, gzip.msdos.exe
+is compressed to gzi.msd.exe.gz. Names are not truncated on systems
+which do not have a limit on file name length.
+
+By default, @code{gzip} keeps the original file name and timestamp in
+the compressed file. These are used when decompressing the file with the
+@samp{-N} option. This is useful when the compressed file name was
+truncated or when the time stamp was not preserved after a file
+transfer. However, due to limitations in the current @code{gzip} file
+format, fractional seconds are discarded. Also, time stamps must fall
+within the range 1970-01-01 00:00:00 through 2106-02-07 06:28:15
+@acronym{UTC}, and hosts whose operating systems use 32-bit time
+stamps are further restricted to time stamps no later than 2038-01-19
+03:14:07 @acronym{UTC}. The upper bounds assume the typical case
+where leap seconds are ignored.
+
+Compressed files can be restored to their original form using @samp{gzip -d}
+or @code{gunzip} or @code{zcat}. If the original name saved in the
+compressed file is not suitable for its file system, a new name is
+constructed from the original one to make it legal.
+
+@code{gunzip} takes a list of files on its command line and replaces
+each file whose name ends with @samp{.gz}, @samp{.z}, @samp{.Z},
+@samp{-gz}, @samp{-z} or @samp{_z} and which begins with the correct
+magic number with an uncompressed file without the original extension.
+@code{gunzip} also recognizes the special extensions @samp{.tgz} and
+@samp{.taz} as shorthands for @samp{.tar.gz} and @samp{.tar.Z}
+respectively. When compressing, @code{gzip} uses the @samp{.tgz}
+extension if necessary instead of truncating a file with a @samp{.tar}
+extension.
+
+@code{gunzip} can currently decompress files created by @code{gzip},
+@code{zip}, @code{compress} or @code{pack}. The detection of the input
+format is automatic. When using the first two formats, @code{gunzip}
+checks a 32 bit CRC (cyclic redundancy check). For @code{pack},
+@code{gunzip} checks the uncompressed length. The @code{compress} format
+was not designed to allow consistency checks. However @code{gunzip} is
+sometimes able to detect a bad @samp{.Z} file. If you get an error when
+uncompressing a @samp{.Z} file, do not assume that the @samp{.Z} file is
+correct simply because the standard @code{uncompress} does not complain.
+This generally means that the standard @code{uncompress} does not check
+its input, and happily generates garbage output. The SCO @samp{compress
+-H} format (@code{lzh} compression method) does not include a CRC but
+also allows some consistency checks.
+
+Files created by @code{zip} can be uncompressed by @code{gzip} only if
+they have a single member compressed with the 'deflation' method. This
+feature is only intended to help conversion of @code{tar.zip} files to
+the @code{tar.gz} format. To extract a @code{zip} file with a single
+member, use a command like @samp{gunzip <foo.zip} or @samp{gunzip -S
+.zip foo.zip}. To extract @code{zip} files with several
+members, use @code{unzip} instead of @code{gunzip}.
+
+@code{zcat} is identical to @samp{gunzip -c}. @code{zcat}
+uncompresses either a list of files on the command line or its standard
+input and writes the uncompressed data on standard output. @code{zcat}
+will uncompress files that have the correct magic number whether they
+have a @samp{.gz} suffix or not.
+
+@code{gzip} uses the Lempel-Ziv algorithm used in @code{zip} and PKZIP.
+The amount of compression obtained depends on the size of the input and
+the distribution of common substrings. Typically, text such as source
+code or English is reduced by 60-70%. Compression is generally much
+better than that achieved by LZW (as used in @code{compress}), Huffman
+coding (as used in @code{pack}), or adaptive Huffman coding
+(@code{compact}).
+
+Compression is always performed, even if the compressed file is slightly
+larger than the original. The worst case expansion is a few bytes for
+the @code{gzip} file header, plus 5 bytes every 32K block, or an expansion
+ratio of 0.015% for large files. Note that the actual number of used
+disk blocks almost never increases. @code{gzip} normally preserves the mode,
+ownership and time stamps of files when compressing or decompressing.
+
+The @code{gzip} file format is specified in P. Deutsch, @sc{gzip} file
+format specification version 4.3,
+@uref{ftp://ftp.isi.edu/in-notes/rfc1952.txt, Internet RFC 1952} (May
+1996). The @code{zip} deflation format is specified in P. Deutsch,
+@sc{deflate} Compressed Data Format Specification version 1.3,
+@uref{ftp://ftp.isi.edu/in-notes/rfc1951.txt, Internet RFC 1951} (May
+1996).
+
+@node Sample, Invoking gzip, Overview, Top
+@chapter Sample Output
+@cindex sample
+
+Here are some realistic examples of running @code{gzip}.
+
+This is the output of the command @samp{gzip -h}:
+
+@example
+gzip @var{version-number}
+usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
+ -c --stdout write on standard output, keep original files unchanged
+ -d --decompress decompress
+ -f --force force overwrite of output file and compress links
+ -h --help give this help
+ -l --list list compressed file contents
+ -L --license display software license
+ -n --no-name do not save or restore the original name and time stamp
+ -N --name save or restore the original name and time stamp
+ -q --quiet suppress all warnings
+ -r --recursive operate recursively on directories
+ -S .suf --suffix .suf use suffix .suf on compressed files
+ -t --test test compressed file integrity
+ -v --verbose verbose mode
+ -V --version display version number
+ -1 --fast compress faster
+ -9 --best compress better
+ file... files to (de)compress. If none given, use standard input.
+Report bugs to <bug-gzip@@gnu.org>.
+@end example
+
+This is the output of the command @samp{gzip -v texinfo.tex}:
+
+@example
+texinfo.tex: 69.7% -- replaced with texinfo.tex.gz
+@end example
+
+The following command will find all @code{gzip} files in the current
+directory and subdirectories, and extract them in place without
+destroying the original:
+
+@example
+find . -name '*.gz' -print | sed 's/^\(.*\)[.]gz$/gunzip < "&" > "\1"/' | sh
+@end example
+
+@node Invoking gzip, Advanced usage, Sample, Top
+@chapter Invoking @code{gzip}
+@cindex invoking
+@cindex options
+
+The format for running the @code{gzip} program is:
+
+@example
+gzip @var{option} @dots{}
+@end example
+
+@code{gzip} supports the following options:
+
+@table @samp
+@item --stdout
+@itemx --to-stdout
+@itemx -c
+Write output on standard output; keep original files unchanged.
+If there are several input files, the output consists of a sequence of
+independently compressed members. To obtain better compression,
+concatenate all input files before compressing them.
+
+@item --decompress
+@itemx --uncompress
+@itemx -d
+Decompress.
+
+@item --force
+@itemx -f
+Force compression or decompression even if the file has multiple links
+or the corresponding file already exists, or if the compressed data
+is read from or written to a terminal. If the input data is not in
+a format recognized by @code{gzip}, and if the option @samp{--stdout} is also
+given, copy the input data without change to the standard output: let
+@code{zcat} behave as @code{cat}. If @samp{-f} is not given, and
+when not running in the background, @code{gzip} prompts to verify
+whether an existing file should be overwritten.
+
+@item --help
+@itemx -h
+Print an informative help message describing the options then quit.
+
+@item --list
+@itemx -l
+For each compressed file, list the following fields:
+
+@example
+compressed size: size of the compressed file
+uncompressed size: size of the uncompressed file
+ratio: compression ratio (0.0% if unknown)
+uncompressed_name: name of the uncompressed file
+@end example
+
+The uncompressed size is given as @samp{-1} for files not in @code{gzip}
+format, such as compressed @samp{.Z} files. To get the uncompressed size for
+such a file, you can use:
+
+@example
+zcat file.Z | wc -c
+@end example
+
+In combination with the @samp{--verbose} option, the following fields are also
+displayed:
+
+@example
+method: compression method (deflate,compress,lzh,pack)
+crc: the 32-bit CRC of the uncompressed data
+date & time: time stamp for the uncompressed file
+@end example
+
+The crc is given as ffffffff for a file not in gzip format.
+
+With @samp{--verbose}, the size totals and compression ratio for all files
+is also displayed, unless some sizes are unknown. With @samp{--quiet},
+the title and totals lines are not displayed.
+
+The @code{gzip} format represents the input size modulo
+@math{2^32}, so the uncompressed size and compression ratio are listed
+incorrectly for uncompressed files 4 GB and larger. To work around
+this problem, you can use the following command to discover a large
+uncompressed file's true size:
+
+@example
+zcat file.gz | wc -c
+@end example
+
+@item --license
+@itemx -L
+Display the @code{gzip} license then quit.
+
+@item --no-name
+@itemx -n
+When compressing, do not save the original file name and time stamp by
+default. (The original name is always saved if the name had to be
+truncated.) When decompressing, do not restore the original file name
+if present (remove only the @code{gzip}
+suffix from the compressed file name) and do not restore the original
+time stamp if present (copy it from the compressed file). This option
+is the default when decompressing.
+
+@item --name
+@itemx -N
+When compressing, always save the original file name and time stamp; this
+is the default. When decompressing, restore the original file name and
+time stamp if present. This option is useful on systems which have
+a limit on file name length or when the time stamp has been lost after
+a file transfer.
+
+@item --quiet
+@itemx -q
+Suppress all warning messages.
+
+@item --recursive
+@itemx -r
+Travel the directory structure recursively. If any of the file names
+specified on the command line are directories, @code{gzip} will descend
+into the directory and compress all the files it finds there (or
+decompress them in the case of @code{gunzip}).
+
+@item --suffix @var{suf}
+@itemx -S @var{suf}
+Use suffix @samp{@var{suf}} instead of @samp{.gz}. Any suffix can be
+given, but suffixes other than @samp{.z} and @samp{.gz} should be
+avoided to avoid confusion when files are transferred to other systems.
+A null suffix forces gunzip to try decompression on all given files
+regardless of suffix, as in:
+
+@example
+gunzip -S "" * (*.* for MSDOS)
+@end example
+
+Previous versions of gzip used the @samp{.z} suffix. This was changed to
+avoid a conflict with @code{pack}.
+
+@item --test
+@itemx -t
+Test. Check the compressed file integrity.
+
+@item --verbose
+@itemx -v
+Verbose. Display the name and percentage reduction for each file compressed.
+
+@item --version
+@itemx -V
+Version. Display the version number and compilation options, then quit.
+
+@item --fast
+@itemx --best
+@itemx -@var{n}
+Regulate the speed of compression using the specified digit @var{n},
+where @samp{-1} or @samp{--fast} indicates the fastest compression
+method (less compression) and @samp{--best} or @samp{-9} indicates the
+slowest compression method (optimal compression). The default
+compression level is @samp{-6} (that is, biased towards high compression at
+expense of speed).
+@end table
+
+@node Advanced usage, Environment, Invoking gzip, Top
+@chapter Advanced usage
+@cindex concatenated files
+
+Multiple compressed files can be concatenated. In this case,
+@code{gunzip} will extract all members at once. If one member is
+damaged, other members might still be recovered after removal of the
+damaged member. Better compression can be usually obtained if all
+members are decompressed and then recompressed in a single step.
+
+This is an example of concatenating @code{gzip} files:
+
+@example
+gzip -c file1 > foo.gz
+gzip -c file2 >> foo.gz
+@end example
+
+Then
+
+@example
+gunzip -c foo
+@end example
+
+is equivalent to
+
+@example
+cat file1 file2
+@end example
+
+In case of damage to one member of a @samp{.gz} file, other members can
+still be recovered (if the damaged member is removed). However,
+you can get better compression by compressing all members at once:
+
+@example
+cat file1 file2 | gzip > foo.gz
+@end example
+
+compresses better than
+
+@example
+gzip -c file1 file2 > foo.gz
+@end example
+
+If you want to recompress concatenated files to get better compression, do:
+
+@example
+zcat old.gz | gzip > new.gz
+@end example
+
+If a compressed file consists of several members, the uncompressed
+size and CRC reported by the @samp{--list} option applies to the last member
+only. If you need the uncompressed size for all members, you can use:
+
+@example
+zcat file.gz | wc -c
+@end example
+
+If you wish to create a single archive file with multiple members so
+that members can later be extracted independently, use an archiver such
+as @code{tar} or @code{zip}. GNU @code{tar} supports the @samp{-z}
+option to invoke @code{gzip} transparently. @code{gzip} is designed as a
+complement to @code{tar}, not as a replacement.
+
+@node Environment, Tapes, Advanced usage, Top
+@chapter Environment
+@cindex Environment
+
+The environment variable @code{GZIP} can hold a set of default options for
+@code{gzip}. These options are interpreted first and can be overwritten by
+explicit command line parameters. For example:
+
+@example
+for sh: GZIP="-8v --name"; export GZIP
+for csh: setenv GZIP "-8v --name"
+for MSDOS: set GZIP=-8v --name
+@end example
+
+On Vax/VMS, the name of the environment variable is @code{GZIP_OPT}, to
+avoid a conflict with the symbol set for invocation of the program.
+
+@node Tapes, Problems, Environment, Top
+@chapter Using @code{gzip} on tapes
+@cindex tapes
+
+When writing compressed data to a tape, it is generally necessary to pad
+the output with zeroes up to a block boundary. When the data is read and
+the whole block is passed to @code{gunzip} for decompression,
+@code{gunzip} detects that there is extra trailing garbage after the
+compressed data and emits a warning by default if the garbage contains
+nonzero bytes. You have to use the
+@samp{--quiet} option to suppress the warning. This option can be set in the
+@code{GZIP} environment variable, as in:
+
+@example
+for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
+for csh: (setenv GZIP "-q"; tar -xfz --block-compress /dev/rst0)
+@end example
+
+In the above example, @code{gzip} is invoked implicitly by the @samp{-z}
+option of GNU @code{tar}. Make sure that the same block size (@samp{-b}
+option of @code{tar}) is used for reading and writing compressed data on
+tapes. (This example assumes you are using the GNU version of
+@code{tar}.)
+
+@node Problems, Copying This Manual, Tapes, Top
+@chapter Reporting Bugs
+@cindex bugs
+
+If you find a bug in @code{gzip}, please send electronic mail to
+@email{bug-gzip@@gnu.org}. Include the version number,
+which you can find by running @w{@samp{gzip -V}}. Also include in your
+message the hardware and operating system, the compiler used to compile
+@code{gzip},
+a description of the bug behavior, and the input to @code{gzip} that triggered
+the bug.@refill
+
+@node Copying This Manual, Concept Index, Problems, Top
+@appendix Copying This Manual
+
+@menu
+* GNU Free Documentation License:: License for copying this manual.
+@end menu
+
+@include fdl.texi
+
+@node Concept Index, , Copying This Manual, Top
+@appendix Concept Index
+
+@printindex cp
+
+@bye
--- /dev/null
+@set UPDATED 8 December 2006
+@set UPDATED-MONTH December 2006
+@set EDITION 1.3.9
+@set VERSION 1.3.9
--- /dev/null
+@set UPDATED 8 December 2006
+@set UPDATED-MONTH December 2006
+@set EDITION 1.3.9
+@set VERSION 1.3.9
+++ /dev/null
-
-@node GNU Free Documentation License
-@appendixsec GNU Free Documentation License
-
-@cindex FDL, GNU Free Documentation License
-@center Version 1.1, March 2000
-
-@display
-Copyright @copyright{} 2000 Free Software Foundation, Inc.
-59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
-
-Everyone is permitted to copy and distribute verbatim copies
-of this license document, but changing it is not allowed.
-@end display
-
-@enumerate 0
-@item
-PREAMBLE
-
-The purpose of this License is to make a manual, textbook, or other
-written document @dfn{free} in the sense of freedom: to assure everyone
-the effective freedom to copy and redistribute it, with or without
-modifying it, either commercially or noncommercially. Secondarily,
-this License preserves for the author and publisher a way to get
-credit for their work, while not being considered responsible for
-modifications made by others.
-
-This License is a kind of ``copyleft'', which means that derivative
-works of the document must themselves be free in the same sense. It
-complements the GNU General Public License, which is a copyleft
-license designed for free software.
-
-We have designed this License in order to use it for manuals for free
-software, because free software needs free documentation: a free
-program should come with manuals providing the same freedoms that the
-software does. But this License is not limited to software manuals;
-it can be used for any textual work, regardless of subject matter or
-whether it is published as a printed book. We recommend this License
-principally for works whose purpose is instruction or reference.
-
-@item
-APPLICABILITY AND DEFINITIONS
-
-This License applies to any manual or other work that contains a
-notice placed by the copyright holder saying it can be distributed
-under the terms of this License. The ``Document'', below, refers to any
-such manual or work. Any member of the public is a licensee, and is
-addressed as ``you''.
-
-A ``Modified Version'' of the Document means any work containing the
-Document or a portion of it, either copied verbatim, or with
-modifications and/or translated into another language.
-
-A ``Secondary Section'' is a named appendix or a front-matter section of
-the Document that deals exclusively with the relationship of the
-publishers or authors of the Document to the Document's overall subject
-(or to related matters) and contains nothing that could fall directly
-within that overall subject. (For example, if the Document is in part a
-textbook of mathematics, a Secondary Section may not explain any
-mathematics.) The relationship could be a matter of historical
-connection with the subject or with related matters, or of legal,
-commercial, philosophical, ethical or political position regarding
-them.
-
-The ``Invariant Sections'' are certain Secondary Sections whose titles
-are designated, as being those of Invariant Sections, in the notice
-that says that the Document is released under this License.
-
-The ``Cover Texts'' are certain short passages of text that are listed,
-as Front-Cover Texts or Back-Cover Texts, in the notice that says that
-the Document is released under this License.
-
-A ``Transparent'' copy of the Document means a machine-readable copy,
-represented in a format whose specification is available to the
-general public, whose contents can be viewed and edited directly and
-straightforwardly with generic text editors or (for images composed of
-pixels) generic paint programs or (for drawings) some widely available
-drawing editor, and that is suitable for input to text formatters or
-for automatic translation to a variety of formats suitable for input
-to text formatters. A copy made in an otherwise Transparent file
-format whose markup has been designed to thwart or discourage
-subsequent modification by readers is not Transparent. A copy that is
-not ``Transparent'' is called ``Opaque''.
-
-Examples of suitable formats for Transparent copies include plain
-@sc{ascii} without markup, Texinfo input format, La@TeX{} input format,
-@acronym{SGML} or @acronym{XML} using a publicly available
-@acronym{DTD}, and standard-conforming simple @acronym{HTML} designed
-for human modification. Opaque formats include PostScript,
-@acronym{PDF}, proprietary formats that can be read and edited only by
-proprietary word processors, @acronym{SGML} or @acronym{XML} for which
-the @acronym{DTD} and/or processing tools are not generally available,
-and the machine-generated @acronym{HTML} produced by some word
-processors for output purposes only.
-
-The ``Title Page'' means, for a printed book, the title page itself,
-plus such following pages as are needed to hold, legibly, the material
-this License requires to appear in the title page. For works in
-formats which do not have any title page as such, ``Title Page'' means
-the text near the most prominent appearance of the work's title,
-preceding the beginning of the body of the text.
-
-@item
-VERBATIM COPYING
-
-You may copy and distribute the Document in any medium, either
-commercially or noncommercially, provided that this License, the
-copyright notices, and the license notice saying this License applies
-to the Document are reproduced in all copies, and that you add no other
-conditions whatsoever to those of this License. You may not use
-technical measures to obstruct or control the reading or further
-copying of the copies you make or distribute. However, you may accept
-compensation in exchange for copies. If you distribute a large enough
-number of copies you must also follow the conditions in section 3.
-
-You may also lend copies, under the same conditions stated above, and
-you may publicly display copies.
-
-@item
-COPYING IN QUANTITY
-
-If you publish printed copies of the Document numbering more than 100,
-and the Document's license notice requires Cover Texts, you must enclose
-the copies in covers that carry, clearly and legibly, all these Cover
-Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
-the back cover. Both covers must also clearly and legibly identify
-you as the publisher of these copies. The front cover must present
-the full title with all words of the title equally prominent and
-visible. You may add other material on the covers in addition.
-Copying with changes limited to the covers, as long as they preserve
-the title of the Document and satisfy these conditions, can be treated
-as verbatim copying in other respects.
-
-If the required texts for either cover are too voluminous to fit
-legibly, you should put the first ones listed (as many as fit
-reasonably) on the actual cover, and continue the rest onto adjacent
-pages.
-
-If you publish or distribute Opaque copies of the Document numbering
-more than 100, you must either include a machine-readable Transparent
-copy along with each Opaque copy, or state in or with each Opaque copy
-a publicly-accessible computer-network location containing a complete
-Transparent copy of the Document, free of added material, which the
-general network-using public has access to download anonymously at no
-charge using public-standard network protocols. If you use the latter
-option, you must take reasonably prudent steps, when you begin
-distribution of Opaque copies in quantity, to ensure that this
-Transparent copy will remain thus accessible at the stated location
-until at least one year after the last time you distribute an Opaque
-copy (directly or through your agents or retailers) of that edition to
-the public.
-
-It is requested, but not required, that you contact the authors of the
-Document well before redistributing any large number of copies, to give
-them a chance to provide you with an updated version of the Document.
-
-@item
-MODIFICATIONS
-
-You may copy and distribute a Modified Version of the Document under
-the conditions of sections 2 and 3 above, provided that you release
-the Modified Version under precisely this License, with the Modified
-Version filling the role of the Document, thus licensing distribution
-and modification of the Modified Version to whoever possesses a copy
-of it. In addition, you must do these things in the Modified Version:
-
-@enumerate A
-@item
-Use in the Title Page (and on the covers, if any) a title distinct
-from that of the Document, and from those of previous versions
-(which should, if there were any, be listed in the History section
-of the Document). You may use the same title as a previous version
-if the original publisher of that version gives permission.
-
-@item
-List on the Title Page, as authors, one or more persons or entities
-responsible for authorship of the modifications in the Modified
-Version, together with at least five of the principal authors of the
-Document (all of its principal authors, if it has less than five).
-
-@item
-State on the Title page the name of the publisher of the
-Modified Version, as the publisher.
-
-@item
-Preserve all the copyright notices of the Document.
-
-@item
-Add an appropriate copyright notice for your modifications
-adjacent to the other copyright notices.
-
-@item
-Include, immediately after the copyright notices, a license notice
-giving the public permission to use the Modified Version under the
-terms of this License, in the form shown in the Addendum below.
-
-@item
-Preserve in that license notice the full lists of Invariant Sections
-and required Cover Texts given in the Document's license notice.
-
-@item
-Include an unaltered copy of this License.
-
-@item
-Preserve the section entitled ``History'', and its title, and add to
-it an item stating at least the title, year, new authors, and
-publisher of the Modified Version as given on the Title Page. If
-there is no section entitled ``History'' in the Document, create one
-stating the title, year, authors, and publisher of the Document as
-given on its Title Page, then add an item describing the Modified
-Version as stated in the previous sentence.
-
-@item
-Preserve the network location, if any, given in the Document for
-public access to a Transparent copy of the Document, and likewise
-the network locations given in the Document for previous versions
-it was based on. These may be placed in the ``History'' section.
-You may omit a network location for a work that was published at
-least four years before the Document itself, or if the original
-publisher of the version it refers to gives permission.
-
-@item
-In any section entitled ``Acknowledgments'' or ``Dedications'',
-preserve the section's title, and preserve in the section all the
-substance and tone of each of the contributor acknowledgments
-and/or dedications given therein.
-
-@item
-Preserve all the Invariant Sections of the Document,
-unaltered in their text and in their titles. Section numbers
-or the equivalent are not considered part of the section titles.
-
-@item
-Delete any section entitled ``Endorsements''. Such a section
-may not be included in the Modified Version.
-
-@item
-Do not retitle any existing section as ``Endorsements''
-or to conflict in title with any Invariant Section.
-@end enumerate
-
-If the Modified Version includes new front-matter sections or
-appendices that qualify as Secondary Sections and contain no material
-copied from the Document, you may at your option designate some or all
-of these sections as invariant. To do this, add their titles to the
-list of Invariant Sections in the Modified Version's license notice.
-These titles must be distinct from any other section titles.
-
-You may add a section entitled ``Endorsements'', provided it contains
-nothing but endorsements of your Modified Version by various
-parties---for example, statements of peer review or that the text has
-been approved by an organization as the authoritative definition of a
-standard.
-
-You may add a passage of up to five words as a Front-Cover Text, and a
-passage of up to 25 words as a Back-Cover Text, to the end of the list
-of Cover Texts in the Modified Version. Only one passage of
-Front-Cover Text and one of Back-Cover Text may be added by (or
-through arrangements made by) any one entity. If the Document already
-includes a cover text for the same cover, previously added by you or
-by arrangement made by the same entity you are acting on behalf of,
-you may not add another; but you may replace the old one, on explicit
-permission from the previous publisher that added the old one.
-
-The author(s) and publisher(s) of the Document do not by this License
-give permission to use their names for publicity for or to assert or
-imply endorsement of any Modified Version.
-
-@item
-COMBINING DOCUMENTS
-
-You may combine the Document with other documents released under this
-License, under the terms defined in section 4 above for modified
-versions, provided that you include in the combination all of the
-Invariant Sections of all of the original documents, unmodified, and
-list them all as Invariant Sections of your combined work in its
-license notice.
-
-The combined work need only contain one copy of this License, and
-multiple identical Invariant Sections may be replaced with a single
-copy. If there are multiple Invariant Sections with the same name but
-different contents, make the title of each such section unique by
-adding at the end of it, in parentheses, the name of the original
-author or publisher of that section if known, or else a unique number.
-Make the same adjustment to the section titles in the list of
-Invariant Sections in the license notice of the combined work.
-
-In the combination, you must combine any sections entitled ``History''
-in the various original documents, forming one section entitled
-``History''; likewise combine any sections entitled ``Acknowledgments'',
-and any sections entitled ``Dedications''. You must delete all sections
-entitled ``Endorsements.''
-
-@item
-COLLECTIONS OF DOCUMENTS
-
-You may make a collection consisting of the Document and other documents
-released under this License, and replace the individual copies of this
-License in the various documents with a single copy that is included in
-the collection, provided that you follow the rules of this License for
-verbatim copying of each of the documents in all other respects.
-
-You may extract a single document from such a collection, and distribute
-it individually under this License, provided you insert a copy of this
-License into the extracted document, and follow this License in all
-other respects regarding verbatim copying of that document.
-
-@item
-AGGREGATION WITH INDEPENDENT WORKS
-
-A compilation of the Document or its derivatives with other separate
-and independent documents or works, in or on a volume of a storage or
-distribution medium, does not as a whole count as a Modified Version
-of the Document, provided no compilation copyright is claimed for the
-compilation. Such a compilation is called an ``aggregate'', and this
-License does not apply to the other self-contained works thus compiled
-with the Document, on account of their being thus compiled, if they
-are not themselves derivative works of the Document.
-
-If the Cover Text requirement of section 3 is applicable to these
-copies of the Document, then if the Document is less than one quarter
-of the entire aggregate, the Document's Cover Texts may be placed on
-covers that surround only the Document within the aggregate.
-Otherwise they must appear on covers around the whole aggregate.
-
-@item
-TRANSLATION
-
-Translation is considered a kind of modification, so you may
-distribute translations of the Document under the terms of section 4.
-Replacing Invariant Sections with translations requires special
-permission from their copyright holders, but you may include
-translations of some or all Invariant Sections in addition to the
-original versions of these Invariant Sections. You may include a
-translation of this License provided that you also include the
-original English version of this License. In case of a disagreement
-between the translation and the original English version of this
-License, the original English version will prevail.
-
-@item
-TERMINATION
-
-You may not copy, modify, sublicense, or distribute the Document except
-as expressly provided for under this License. Any other attempt to
-copy, modify, sublicense or distribute the Document is void, and will
-automatically terminate your rights under this License. However,
-parties who have received copies, or rights, from you under this
-License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-@item
-FUTURE REVISIONS OF THIS LICENSE
-
-The Free Software Foundation may publish new, revised versions
-of the GNU Free Documentation License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns. See
-@uref{http://www.gnu.org/copyleft/}.
-
-Each version of the License is given a distinguishing version number.
-If the Document specifies that a particular numbered version of this
-License ``or any later version'' applies to it, you have the option of
-following the terms and conditions either of that specified version or
-of any later version that has been published (not as a draft) by the
-Free Software Foundation. If the Document does not specify a version
-number of this License, you may choose any version ever published (not
-as a draft) by the Free Software Foundation.
-@end enumerate
-
-@page
-@appendixsubsec ADDENDUM: How to use this License for your documents
-
-To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and
-license notices just after the title page:
-
-@smallexample
-@group
- Copyright (C) @var{year} @var{your name}.
- Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.1
- or any later version published by the Free Software Foundation;
- with the Invariant Sections being @var{list their titles}, with the
- Front-Cover Texts being @var{list}, and with the Back-Cover Texts being @var{list}.
- A copy of the license is included in the section entitled ``GNU
- Free Documentation License''.
-@end group
-@end smallexample
-
-If you have no Invariant Sections, write ``with no Invariant Sections''
-instead of saying which ones are invariant. If you have no
-Front-Cover Texts, write ``no Front-Cover Texts'' instead of
-``Front-Cover Texts being @var{list}''; likewise for Back-Cover Texts.
-
-If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of
-free software license, such as the GNU General Public License,
-to permit their use in free software.
-
-@c Local Variables:
-@c ispell-local-pdict: "ispell-dict"
-@c End:
-
+++ /dev/null
-/* Getopt for GNU.
- NOTE: getopt is now part of the C library, so if you don't know what
- "Keep this file name-space clean" means, talk to drepper@gnu.org
- before changing it!
- Copyright (C) 1987,88,89,90,91,92,93,94,95,96,98,99,2000,2001
- Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-\f
-/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>.
- Ditto for AIX 3.2 and <stdlib.h>. */
-#ifndef _NO_PROTO
-# define _NO_PROTO
-#endif
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if !defined __STDC__ || !__STDC__
-/* This is a separate conditional since some stdc systems
- reject `defined (const)'. */
-# ifndef const
-# define const
-# endif
-#endif
-
-#include <stdio.h>
-
-/* Comment out all this code if we are using the GNU C Library, and are not
- actually compiling the library itself. This code is part of the GNU C
- Library, but also included in many other GNU distributions. Compiling
- and linking in this code is a waste when using the GNU C library
- (especially if it is a shared library). Rather than having every GNU
- program understand `configure --with-gnu-libc' and omit the object files,
- it is simpler to just do this in the source for each such file. */
-
-#define GETOPT_INTERFACE_VERSION 2
-#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
-# include <gnu-versions.h>
-# if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
-# define ELIDE_CODE
-# endif
-#endif
-
-#ifndef ELIDE_CODE
-
-
-/* This needs to come after some library #include
- to get __GNU_LIBRARY__ defined. */
-#ifdef __GNU_LIBRARY__
-/* Don't include stdlib.h for non-GNU C libraries because some of them
- contain conflicting prototypes for getopt. */
-# include <stdlib.h>
-# include <unistd.h>
-#endif /* GNU C library. */
-
-#ifdef VMS
-# include <unixlib.h>
-# if HAVE_STRING_H - 0
-# include <string.h>
-# endif
-#endif
-
-#ifndef _
-/* This is for other GNU distributions with internationalized messages. */
-# if (HAVE_LIBINTL_H && ENABLE_NLS) || defined _LIBC
-# include <libintl.h>
-# ifndef _
-# define _(msgid) gettext (msgid)
-# endif
-# else
-# define _(msgid) (msgid)
-# endif
-#endif
-
-/* This version of `getopt' appears to the caller like standard Unix `getopt'
- but it behaves differently for the user, since it allows the user
- to intersperse the options with the other arguments.
-
- As `getopt' works, it permutes the elements of ARGV so that,
- when it is done, all the options precede everything else. Thus
- all application programs are extended to handle flexible argument order.
-
- Setting the environment variable POSIXLY_CORRECT disables permutation.
- Then the behavior is completely standard.
-
- GNU application programs can use a third alternative mode in which
- they can distinguish the relative order of options and other arguments. */
-
-#include "getopt.h"
-
-/* For communication from `getopt' to the caller.
- When `getopt' finds an option that takes an argument,
- the argument value is returned here.
- Also, when `ordering' is RETURN_IN_ORDER,
- each non-option ARGV-element is returned here. */
-
-char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
- This is used for communication to and from the caller
- and for communication between successive calls to `getopt'.
-
- On entry to `getopt', zero means this is the first call; initialize.
-
- When `getopt' returns -1, this is the index of the first of the
- non-option elements that the caller should itself scan.
-
- Otherwise, `optind' communicates from one call to the next
- how much of ARGV has been scanned so far. */
-
-/* 1003.2 says this must be 1 before any call. */
-int optind = 1;
-
-/* Formerly, initialization of getopt depended on optind==0, which
- causes problems with re-calling getopt as programs generally don't
- know that. */
-
-int __getopt_initialized;
-
-/* The next char to be scanned in the option-element
- in which the last option character we returned was found.
- This allows us to pick up the scan where we left off.
-
- If this is zero, or a null string, it means resume the scan
- by advancing to the next ARGV-element. */
-
-static char *nextchar;
-
-/* Callers store zero here to inhibit the error message
- for unrecognized options. */
-
-int opterr = 1;
-
-/* Set to an option character which was unrecognized.
- This must be initialized on some systems to avoid linking in the
- system's own getopt implementation. */
-
-int optopt = '?';
-
-/* Describe how to deal with options that follow non-option ARGV-elements.
-
- If the caller did not specify anything,
- the default is REQUIRE_ORDER if the environment variable
- POSIXLY_CORRECT is defined, PERMUTE otherwise.
-
- REQUIRE_ORDER means don't recognize them as options;
- stop option processing when the first non-option is seen.
- This is what Unix does.
- This mode of operation is selected by either setting the environment
- variable POSIXLY_CORRECT, or using `+' as the first character
- of the list of option characters.
-
- PERMUTE is the default. We permute the contents of ARGV as we scan,
- so that eventually all the non-options are at the end. This allows options
- to be given in any order, even with programs that were not written to
- expect this.
-
- RETURN_IN_ORDER is an option available to programs that were written
- to expect options and other ARGV-elements in any order and that care about
- the ordering of the two. We describe each non-option ARGV-element
- as if it were the argument of an option with character code 1.
- Using `-' as the first character of the list of option characters
- selects this mode of operation.
-
- The special argument `--' forces an end of option-scanning regardless
- of the value of `ordering'. In the case of RETURN_IN_ORDER, only
- `--' can cause `getopt' to return -1 with `optind' != ARGC. */
-
-static enum
-{
- REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
-} ordering;
-
-/* Value of POSIXLY_CORRECT environment variable. */
-static char *posixly_correct;
-\f
-#ifdef __GNU_LIBRARY__
-/* We want to avoid inclusion of string.h with non-GNU libraries
- because there are many ways it can cause trouble.
- On some systems, it contains special magic macros that don't work
- in GCC. */
-# include <string.h>
-# define my_index strchr
-#else
-
-# if HAVE_STRING_H
-# include <string.h>
-# else
-# include <strings.h>
-# endif
-
-/* Avoid depending on library functions or files
- whose names are inconsistent. */
-
-#ifndef getenv
-extern char *getenv ();
-#endif
-
-static char *
-my_index (str, chr)
- const char *str;
- int chr;
-{
- while (*str)
- {
- if (*str == chr)
- return (char *) str;
- str++;
- }
- return 0;
-}
-
-/* If using GCC, we can safely declare strlen this way.
- If not using GCC, it is ok not to declare it. */
-#ifdef __GNUC__
-/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h.
- That was relevant to code that was here before. */
-# if (!defined __STDC__ || !__STDC__) && !defined strlen
-/* gcc with -traditional declares the built-in strlen to return int,
- and has done so at least since version 2.4.5. -- rms. */
-extern int strlen (const char *);
-# endif /* not __STDC__ */
-#endif /* __GNUC__ */
-
-#endif /* not __GNU_LIBRARY__ */
-\f
-/* Handle permutation of arguments. */
-
-/* Describe the part of ARGV that contains non-options that have
- been skipped. `first_nonopt' is the index in ARGV of the first of them;
- `last_nonopt' is the index after the last of them. */
-
-static int first_nonopt;
-static int last_nonopt;
-
-#ifdef _LIBC
-/* Bash 2.0 gives us an environment variable containing flags
- indicating ARGV elements that should not be considered arguments. */
-
-#ifdef USE_NONOPTION_FLAGS
-/* Defined in getopt_init.c */
-extern char *__getopt_nonoption_flags;
-
-static int nonoption_flags_max_len;
-static int nonoption_flags_len;
-#endif
-
-static int original_argc;
-static char *const *original_argv;
-
-/* Make sure the environment variable bash 2.0 puts in the environment
- is valid for the getopt call we must make sure that the ARGV passed
- to getopt is that one passed to the process. */
-static void
-__attribute__ ((unused))
-store_args_and_env (int argc, char *const *argv)
-{
- /* XXX This is no good solution. We should rather copy the args so
- that we can compare them later. But we must not use malloc(3). */
- original_argc = argc;
- original_argv = argv;
-}
-# ifdef text_set_element
-text_set_element (__libc_subinit, store_args_and_env);
-# endif /* text_set_element */
-
-# ifdef USE_NONOPTION_FLAGS
-# define SWAP_FLAGS(ch1, ch2) \
- if (nonoption_flags_len > 0) \
- { \
- char __tmp = __getopt_nonoption_flags[ch1]; \
- __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \
- __getopt_nonoption_flags[ch2] = __tmp; \
- }
-# else
-# define SWAP_FLAGS(ch1, ch2)
-# endif
-#else /* !_LIBC */
-# define SWAP_FLAGS(ch1, ch2)
-#endif /* _LIBC */
-
-/* Exchange two adjacent subsequences of ARGV.
- One subsequence is elements [first_nonopt,last_nonopt)
- which contains all the non-options that have been skipped so far.
- The other is elements [last_nonopt,optind), which contains all
- the options processed since those non-options were skipped.
-
- `first_nonopt' and `last_nonopt' are relocated so that they describe
- the new indices of the non-options in ARGV after they are moved. */
-
-#if defined __STDC__ && __STDC__
-static void exchange (char **);
-#endif
-
-static void
-exchange (argv)
- char **argv;
-{
- int bottom = first_nonopt;
- int middle = last_nonopt;
- int top = optind;
- char *tem;
-
- /* Exchange the shorter segment with the far end of the longer segment.
- That puts the shorter segment into the right place.
- It leaves the longer segment in the right place overall,
- but it consists of two parts that need to be swapped next. */
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
- /* First make sure the handling of the `__getopt_nonoption_flags'
- string can work normally. Our top argument must be in the range
- of the string. */
- if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len)
- {
- /* We must extend the array. The user plays games with us and
- presents new arguments. */
- char *new_str = malloc (top + 1);
- if (new_str == NULL)
- nonoption_flags_len = nonoption_flags_max_len = 0;
- else
- {
- memset (__mempcpy (new_str, __getopt_nonoption_flags,
- nonoption_flags_max_len),
- '\0', top + 1 - nonoption_flags_max_len);
- nonoption_flags_max_len = top + 1;
- __getopt_nonoption_flags = new_str;
- }
- }
-#endif
-
- while (top > middle && middle > bottom)
- {
- if (top - middle > middle - bottom)
- {
- /* Bottom segment is the short one. */
- int len = middle - bottom;
- register int i;
-
- /* Swap it with the top part of the top segment. */
- for (i = 0; i < len; i++)
- {
- tem = argv[bottom + i];
- argv[bottom + i] = argv[top - (middle - bottom) + i];
- argv[top - (middle - bottom) + i] = tem;
- SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
- }
- /* Exclude the moved bottom segment from further swapping. */
- top -= len;
- }
- else
- {
- /* Top segment is the short one. */
- int len = top - middle;
- register int i;
-
- /* Swap it with the bottom part of the bottom segment. */
- for (i = 0; i < len; i++)
- {
- tem = argv[bottom + i];
- argv[bottom + i] = argv[middle + i];
- argv[middle + i] = tem;
- SWAP_FLAGS (bottom + i, middle + i);
- }
- /* Exclude the moved top segment from further swapping. */
- bottom += len;
- }
- }
-
- /* Update records for the slots the non-options now occupy. */
-
- first_nonopt += (optind - last_nonopt);
- last_nonopt = optind;
-}
-
-/* Initialize the internal data when the first call is made. */
-
-#if defined __STDC__ && __STDC__
-static const char *_getopt_initialize (int, char *const *, const char *);
-#endif
-static const char *
-_getopt_initialize (argc, argv, optstring)
- int argc;
- char *const *argv;
- const char *optstring;
-{
- /* Start processing options with ARGV-element 1 (since ARGV-element 0
- is the program name); the sequence of previously skipped
- non-option ARGV-elements is empty. */
-
- first_nonopt = last_nonopt = optind;
-
- nextchar = NULL;
-
- posixly_correct = getenv ("POSIXLY_CORRECT");
-
- /* Determine how to handle the ordering of options and nonoptions. */
-
- if (optstring[0] == '-')
- {
- ordering = RETURN_IN_ORDER;
- ++optstring;
- }
- else if (optstring[0] == '+')
- {
- ordering = REQUIRE_ORDER;
- ++optstring;
- }
- else if (posixly_correct != NULL)
- ordering = REQUIRE_ORDER;
- else
- ordering = PERMUTE;
-
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
- if (posixly_correct == NULL
- && argc == original_argc && argv == original_argv)
- {
- if (nonoption_flags_max_len == 0)
- {
- if (__getopt_nonoption_flags == NULL
- || __getopt_nonoption_flags[0] == '\0')
- nonoption_flags_max_len = -1;
- else
- {
- const char *orig_str = __getopt_nonoption_flags;
- int len = nonoption_flags_max_len = strlen (orig_str);
- if (nonoption_flags_max_len < argc)
- nonoption_flags_max_len = argc;
- __getopt_nonoption_flags =
- (char *) malloc (nonoption_flags_max_len);
- if (__getopt_nonoption_flags == NULL)
- nonoption_flags_max_len = -1;
- else
- memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
- '\0', nonoption_flags_max_len - len);
- }
- }
- nonoption_flags_len = nonoption_flags_max_len;
- }
- else
- nonoption_flags_len = 0;
-#endif
-
- return optstring;
-}
-\f
-/* Scan elements of ARGV (whose length is ARGC) for option characters
- given in OPTSTRING.
-
- If an element of ARGV starts with '-', and is not exactly "-" or "--",
- then it is an option element. The characters of this element
- (aside from the initial '-') are option characters. If `getopt'
- is called repeatedly, it returns successively each of the option characters
- from each of the option elements.
-
- If `getopt' finds another option character, it returns that character,
- updating `optind' and `nextchar' so that the next call to `getopt' can
- resume the scan with the following option character or ARGV-element.
-
- If there are no more option characters, `getopt' returns -1.
- Then `optind' is the index in ARGV of the first ARGV-element
- that is not an option. (The ARGV-elements have been permuted
- so that those that are not options now come last.)
-
- OPTSTRING is a string containing the legitimate option characters.
- If an option character is seen that is not listed in OPTSTRING,
- return '?' after printing an error message. If you set `opterr' to
- zero, the error message is suppressed but we still return '?'.
-
- If a char in OPTSTRING is followed by a colon, that means it wants an arg,
- so the following text in the same ARGV-element, or the text of the following
- ARGV-element, is returned in `optarg'. Two colons mean an option that
- wants an optional arg; if there is text in the current ARGV-element,
- it is returned in `optarg', otherwise `optarg' is set to zero.
-
- If OPTSTRING starts with `-' or `+', it requests different methods of
- handling the non-option ARGV-elements.
- See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
-
- Long-named options begin with `--' instead of `-'.
- Their names may be abbreviated as long as the abbreviation is unique
- or is an exact match for some defined option. If they have an
- argument, it follows the option name in the same ARGV-element, separated
- from the option name by a `=', or else the in next ARGV-element.
- When `getopt' finds a long-named option, it returns 0 if that option's
- `flag' field is nonzero, the value of the option's `val' field
- if the `flag' field is zero.
-
- The elements of ARGV aren't really const, because we permute them.
- But we pretend they're const in the prototype to be compatible
- with other systems.
-
- LONGOPTS is a vector of `struct option' terminated by an
- element containing a name which is zero.
-
- LONGIND returns the index in LONGOPT of the long-named option found.
- It is only valid when a long-named option has been found by the most
- recent call.
-
- If LONG_ONLY is nonzero, '-' as well as '--' can introduce
- long-named options. */
-
-int
-_getopt_internal (argc, argv, optstring, longopts, longind, long_only)
- int argc;
- char *const *argv;
- const char *optstring;
- const struct option *longopts;
- int *longind;
- int long_only;
-{
- int print_errors = opterr;
- if (optstring[0] == ':')
- print_errors = 0;
-
- if (argc < 1)
- return -1;
-
- optarg = NULL;
-
- if (optind == 0 || !__getopt_initialized)
- {
- if (optind == 0)
- optind = 1; /* Don't scan ARGV[0], the program name. */
- optstring = _getopt_initialize (argc, argv, optstring);
- __getopt_initialized = 1;
- }
-
- /* Test whether ARGV[optind] points to a non-option argument.
- Either it does not have option syntax, or there is an environment flag
- from the shell indicating it is not an option. The later information
- is only used when the used in the GNU libc. */
-#if defined _LIBC && defined USE_NONOPTION_FLAGS
-# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \
- || (optind < nonoption_flags_len \
- && __getopt_nonoption_flags[optind] == '1'))
-#else
-# define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0')
-#endif
-
- if (nextchar == NULL || *nextchar == '\0')
- {
- /* Advance to the next ARGV-element. */
-
- /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
- moved back by the user (who may also have changed the arguments). */
- if (last_nonopt > optind)
- last_nonopt = optind;
- if (first_nonopt > optind)
- first_nonopt = optind;
-
- if (ordering == PERMUTE)
- {
- /* If we have just processed some options following some non-options,
- exchange them so that the options come first. */
-
- if (first_nonopt != last_nonopt && last_nonopt != optind)
- exchange ((char **) argv);
- else if (last_nonopt != optind)
- first_nonopt = optind;
-
- /* Skip any additional non-options
- and extend the range of non-options previously skipped. */
-
- while (optind < argc && NONOPTION_P)
- optind++;
- last_nonopt = optind;
- }
-
- /* The special ARGV-element `--' means premature end of options.
- Skip it like a null option,
- then exchange with previous non-options as if it were an option,
- then skip everything else like a non-option. */
-
- if (optind != argc && !strcmp (argv[optind], "--"))
- {
- optind++;
-
- if (first_nonopt != last_nonopt && last_nonopt != optind)
- exchange ((char **) argv);
- else if (first_nonopt == last_nonopt)
- first_nonopt = optind;
- last_nonopt = argc;
-
- optind = argc;
- }
-
- /* If we have done all the ARGV-elements, stop the scan
- and back over any non-options that we skipped and permuted. */
-
- if (optind == argc)
- {
- /* Set the next-arg-index to point at the non-options
- that we previously skipped, so the caller will digest them. */
- if (first_nonopt != last_nonopt)
- optind = first_nonopt;
- return -1;
- }
-
- /* If we have come to a non-option and did not permute it,
- either stop the scan or describe it to the caller and pass it by. */
-
- if (NONOPTION_P)
- {
- if (ordering == REQUIRE_ORDER)
- return -1;
- optarg = argv[optind++];
- return 1;
- }
-
- /* We have found another option-ARGV-element.
- Skip the initial punctuation. */
-
- nextchar = (argv[optind] + 1
- + (longopts != NULL && argv[optind][1] == '-'));
- }
-
- /* Decode the current option-ARGV-element. */
-
- /* Check whether the ARGV-element is a long option.
-
- If long_only and the ARGV-element has the form "-f", where f is
- a valid short option, don't consider it an abbreviated form of
- a long option that starts with f. Otherwise there would be no
- way to give the -f short option.
-
- On the other hand, if there's a long option "fubar" and
- the ARGV-element is "-fu", do consider that an abbreviation of
- the long option, just like "--fu", and not "-f" with arg "u".
-
- This distinction seems to be the most useful approach. */
-
- if (longopts != NULL
- && (argv[optind][1] == '-'
- || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1])))))
- {
- char *nameend;
- const struct option *p;
- const struct option *pfound = NULL;
- int exact = 0;
- int ambig = 0;
- int indfound = -1;
- int option_index;
-
- for (nameend = nextchar; *nameend && *nameend != '='; nameend++)
- /* Do nothing. */ ;
-
- /* Test all long options for either exact match
- or abbreviated matches. */
- for (p = longopts, option_index = 0; p->name; p++, option_index++)
- if (!strncmp (p->name, nextchar, nameend - nextchar))
- {
- if ((unsigned int) (nameend - nextchar)
- == (unsigned int) strlen (p->name))
- {
- /* Exact match found. */
- pfound = p;
- indfound = option_index;
- exact = 1;
- break;
- }
- else if (pfound == NULL)
- {
- /* First nonexact match found. */
- pfound = p;
- indfound = option_index;
- }
- else if (long_only
- || pfound->has_arg != p->has_arg
- || pfound->flag != p->flag
- || pfound->val != p->val)
- /* Second or later nonexact match found. */
- ambig = 1;
- }
-
- if (ambig && !exact)
- {
- if (print_errors)
- fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
- argv[0], argv[optind]);
- nextchar += strlen (nextchar);
- optind++;
- optopt = 0;
- return '?';
- }
-
- if (pfound != NULL)
- {
- option_index = indfound;
- optind++;
- if (*nameend)
- {
- /* Don't test has_arg with >, because some C compilers don't
- allow it to be used on enums. */
- if (pfound->has_arg)
- optarg = nameend + 1;
- else
- {
- if (print_errors)
- {
- if (argv[optind - 1][1] == '-')
- /* --option */
- fprintf (stderr,
- _("%s: option `--%s' doesn't allow an argument\n"),
- argv[0], pfound->name);
- else
- /* +option or -option */
- fprintf (stderr,
- _("%s: option `%c%s' doesn't allow an argument\n"),
- argv[0], argv[optind - 1][0], pfound->name);
- }
-
- nextchar += strlen (nextchar);
-
- optopt = pfound->val;
- return '?';
- }
- }
- else if (pfound->has_arg == 1)
- {
- if (optind < argc)
- optarg = argv[optind++];
- else
- {
- if (print_errors)
- fprintf (stderr,
- _("%s: option `%s' requires an argument\n"),
- argv[0], argv[optind - 1]);
- nextchar += strlen (nextchar);
- optopt = pfound->val;
- return optstring[0] == ':' ? ':' : '?';
- }
- }
- nextchar += strlen (nextchar);
- if (longind != NULL)
- *longind = option_index;
- if (pfound->flag)
- {
- *(pfound->flag) = pfound->val;
- return 0;
- }
- return pfound->val;
- }
-
- /* Can't find it as a long option. If this is not getopt_long_only,
- or the option starts with '--' or is not a valid short
- option, then it's an error.
- Otherwise interpret it as a short option. */
- if (!long_only || argv[optind][1] == '-'
- || my_index (optstring, *nextchar) == NULL)
- {
- if (print_errors)
- {
- if (argv[optind][1] == '-')
- /* --option */
- fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
- argv[0], nextchar);
- else
- /* +option or -option */
- fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
- argv[0], argv[optind][0], nextchar);
- }
- nextchar = (char *) "";
- optind++;
- optopt = 0;
- return '?';
- }
- }
-
- /* Look at and handle the next short option-character. */
-
- {
- char c = *nextchar++;
- char *temp = my_index (optstring, c);
-
- /* Increment `optind' when we start to process its last character. */
- if (*nextchar == '\0')
- ++optind;
-
- if (temp == NULL || c == ':')
- {
- if (print_errors)
- {
- if (posixly_correct)
- /* 1003.2 specifies the format of this message. */
- fprintf (stderr, _("%s: illegal option -- %c\n"),
- argv[0], c);
- else
- fprintf (stderr, _("%s: invalid option -- %c\n"),
- argv[0], c);
- }
- optopt = c;
- return '?';
- }
- /* Convenience. Treat POSIX -W foo same as long option --foo */
- if (temp[0] == 'W' && temp[1] == ';')
- {
- char *nameend;
- const struct option *p;
- const struct option *pfound = NULL;
- int exact = 0;
- int ambig = 0;
- int indfound = 0;
- int option_index;
-
- /* This is an option that requires an argument. */
- if (*nextchar != '\0')
- {
- optarg = nextchar;
- /* If we end this ARGV-element by taking the rest as an arg,
- we must advance to the next element now. */
- optind++;
- }
- else if (optind == argc)
- {
- if (print_errors)
- {
- /* 1003.2 specifies the format of this message. */
- fprintf (stderr, _("%s: option requires an argument -- %c\n"),
- argv[0], c);
- }
- optopt = c;
- if (optstring[0] == ':')
- c = ':';
- else
- c = '?';
- return c;
- }
- else
- /* We already incremented `optind' once;
- increment it again when taking next ARGV-elt as argument. */
- optarg = argv[optind++];
-
- /* optarg is now the argument, see if it's in the
- table of longopts. */
-
- for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++)
- /* Do nothing. */ ;
-
- /* Test all long options for either exact match
- or abbreviated matches. */
- for (p = longopts, option_index = 0; p->name; p++, option_index++)
- if (!strncmp (p->name, nextchar, nameend - nextchar))
- {
- if ((unsigned int) (nameend - nextchar) == strlen (p->name))
- {
- /* Exact match found. */
- pfound = p;
- indfound = option_index;
- exact = 1;
- break;
- }
- else if (pfound == NULL)
- {
- /* First nonexact match found. */
- pfound = p;
- indfound = option_index;
- }
- else
- /* Second or later nonexact match found. */
- ambig = 1;
- }
- if (ambig && !exact)
- {
- if (print_errors)
- fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
- argv[0], argv[optind]);
- nextchar += strlen (nextchar);
- optind++;
- return '?';
- }
- if (pfound != NULL)
- {
- option_index = indfound;
- if (*nameend)
- {
- /* Don't test has_arg with >, because some C compilers don't
- allow it to be used on enums. */
- if (pfound->has_arg)
- optarg = nameend + 1;
- else
- {
- if (print_errors)
- fprintf (stderr, _("\
-%s: option `-W %s' doesn't allow an argument\n"),
- argv[0], pfound->name);
-
- nextchar += strlen (nextchar);
- return '?';
- }
- }
- else if (pfound->has_arg == 1)
- {
- if (optind < argc)
- optarg = argv[optind++];
- else
- {
- if (print_errors)
- fprintf (stderr,
- _("%s: option `%s' requires an argument\n"),
- argv[0], argv[optind - 1]);
- nextchar += strlen (nextchar);
- return optstring[0] == ':' ? ':' : '?';
- }
- }
- nextchar += strlen (nextchar);
- if (longind != NULL)
- *longind = option_index;
- if (pfound->flag)
- {
- *(pfound->flag) = pfound->val;
- return 0;
- }
- return pfound->val;
- }
- nextchar = NULL;
- return 'W'; /* Let the application handle it. */
- }
- if (temp[1] == ':')
- {
- if (temp[2] == ':')
- {
- /* This is an option that accepts an argument optionally. */
- if (*nextchar != '\0')
- {
- optarg = nextchar;
- optind++;
- }
- else
- optarg = NULL;
- nextchar = NULL;
- }
- else
- {
- /* This is an option that requires an argument. */
- if (*nextchar != '\0')
- {
- optarg = nextchar;
- /* If we end this ARGV-element by taking the rest as an arg,
- we must advance to the next element now. */
- optind++;
- }
- else if (optind == argc)
- {
- if (print_errors)
- {
- /* 1003.2 specifies the format of this message. */
- fprintf (stderr,
- _("%s: option requires an argument -- %c\n"),
- argv[0], c);
- }
- optopt = c;
- if (optstring[0] == ':')
- c = ':';
- else
- c = '?';
- }
- else
- /* We already incremented `optind' once;
- increment it again when taking next ARGV-elt as argument. */
- optarg = argv[optind++];
- nextchar = NULL;
- }
- }
- return c;
- }
-}
-
-int
-getopt (argc, argv, optstring)
- int argc;
- char *const *argv;
- const char *optstring;
-{
- return _getopt_internal (argc, argv, optstring,
- (const struct option *) 0,
- (int *) 0,
- 0);
-}
-
-#endif /* Not ELIDE_CODE. */
-\f
-#ifdef TEST
-
-/* Compile with -DTEST to make an executable for use in testing
- the above definition of `getopt'. */
-
-int
-main (argc, argv)
- int argc;
- char **argv;
-{
- int c;
- int digit_optind = 0;
-
- while (1)
- {
- int this_option_optind = optind ? optind : 1;
-
- c = getopt (argc, argv, "abc:d:0123456789");
- if (c == -1)
- break;
-
- switch (c)
- {
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- if (digit_optind != 0 && digit_optind != this_option_optind)
- printf ("digits occur in two different argv-elements.\n");
- digit_optind = this_option_optind;
- printf ("option %c\n", c);
- break;
-
- case 'a':
- printf ("option a\n");
- break;
-
- case 'b':
- printf ("option b\n");
- break;
-
- case 'c':
- printf ("option c with value `%s'\n", optarg);
- break;
-
- case '?':
- break;
-
- default:
- printf ("?? getopt returned character code 0%o ??\n", c);
- }
- }
-
- if (optind < argc)
- {
- printf ("non-option ARGV-elements: ");
- while (optind < argc)
- printf ("%s ", argv[optind++]);
- printf ("\n");
- }
-
- exit (0);
-}
-
-#endif /* TEST */
+++ /dev/null
-/* Declarations for getopt.
- Copyright (C) 1989-1994, 1996-1999, 2001 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ifndef _GETOPT_H
-
-#ifndef __need_getopt
-# define _GETOPT_H 1
-#endif
-
-/* If __GNU_LIBRARY__ is not already defined, either we are being used
- standalone, or this is the first header included in the source file.
- If we are being used with glibc, we need to include <features.h>, but
- that does not exist if we are standalone. So: if __GNU_LIBRARY__ is
- not defined, include <ctype.h>, which will pull in <features.h> for us
- if it's from glibc. (Why ctype.h? It's guaranteed to exist and it
- doesn't flood the namespace with stuff the way some other headers do.) */
-#if !defined __GNU_LIBRARY__
-# include <ctype.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* For communication from `getopt' to the caller.
- When `getopt' finds an option that takes an argument,
- the argument value is returned here.
- Also, when `ordering' is RETURN_IN_ORDER,
- each non-option ARGV-element is returned here. */
-
-extern char *optarg;
-
-/* Index in ARGV of the next element to be scanned.
- This is used for communication to and from the caller
- and for communication between successive calls to `getopt'.
-
- On entry to `getopt', zero means this is the first call; initialize.
-
- When `getopt' returns -1, this is the index of the first of the
- non-option elements that the caller should itself scan.
-
- Otherwise, `optind' communicates from one call to the next
- how much of ARGV has been scanned so far. */
-
-extern int optind;
-
-/* Callers store zero here to inhibit the error message `getopt' prints
- for unrecognized options. */
-
-extern int opterr;
-
-/* Set to an option character which was unrecognized. */
-
-extern int optopt;
-
-#ifndef __need_getopt
-/* Describe the long-named options requested by the application.
- The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
- of `struct option' terminated by an element containing a name which is
- zero.
-
- The field `has_arg' is:
- no_argument (or 0) if the option does not take an argument,
- required_argument (or 1) if the option requires an argument,
- optional_argument (or 2) if the option takes an optional argument.
-
- If the field `flag' is not NULL, it points to a variable that is set
- to the value given in the field `val' when the option is found, but
- left unchanged if the option is not found.
-
- To have a long-named option do something other than set an `int' to
- a compiled-in constant, such as set a value from `optarg', set the
- option's `flag' field to zero and its `val' field to a nonzero
- value (the equivalent single-letter option character, if there is
- one). For long options that have a zero `flag' field, `getopt'
- returns the contents of the `val' field. */
-
-struct option
-{
-# if (defined __STDC__ && __STDC__) || defined __cplusplus
- const char *name;
-# else
- char *name;
-# endif
- /* has_arg can't be an enum because some compilers complain about
- type mismatches in all the code that assumes it is an int. */
- int has_arg;
- int *flag;
- int val;
-};
-
-/* Names for the values of the `has_arg' field of `struct option'. */
-
-# define no_argument 0
-# define required_argument 1
-# define optional_argument 2
-#endif /* need getopt */
-
-
-/* Get definitions and prototypes for functions to process the
- arguments in ARGV (ARGC of them, minus the program name) for
- options given in OPTS.
-
- Return the option character from OPTS just read. Return -1 when
- there are no more options. For unrecognized options, or options
- missing arguments, `optopt' is set to the option letter, and '?' is
- returned.
-
- The OPTS string is a list of characters which are recognized option
- letters, optionally followed by colons, specifying that that letter
- takes an argument, to be placed in `optarg'.
-
- If a letter in OPTS is followed by two colons, its argument is
- optional. This behavior is specific to the GNU `getopt'.
-
- The argument `--' causes premature termination of argument
- scanning, explicitly telling `getopt' that there are no more
- options.
-
- If OPTS begins with `--', then non-option arguments are treated as
- arguments to the option '\0'. This behavior is specific to the GNU
- `getopt'. */
-
-#if (defined __STDC__ && __STDC__) || defined __cplusplus
-# ifdef __GNU_LIBRARY__
-/* Many other libraries have conflicting prototypes for getopt, with
- differences in the consts, in stdlib.h. To avoid compilation
- errors, only prototype getopt for the GNU C library. */
-extern int getopt (int __argc, char *const *__argv, const char *__shortopts);
-# else /* not __GNU_LIBRARY__ */
-extern int getopt ();
-# endif /* __GNU_LIBRARY__ */
-
-# ifndef __need_getopt
-extern int getopt_long (int __argc, char *const *__argv, const char *__shortopts,
- const struct option *__longopts, int *__longind);
-extern int getopt_long_only (int __argc, char *const *__argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind);
-
-/* Internal only. Users should not call this directly. */
-extern int _getopt_internal (int __argc, char *const *__argv,
- const char *__shortopts,
- const struct option *__longopts, int *__longind,
- int __long_only);
-# endif
-#else /* not __STDC__ */
-extern int getopt ();
-# ifndef __need_getopt
-extern int getopt_long ();
-extern int getopt_long_only ();
-
-extern int _getopt_internal ();
-# endif
-#endif /* __STDC__ */
-
-#ifdef __cplusplus
-}
-#endif
-
-/* Make sure we later can get all the definitions and declarations. */
-#undef __need_getopt
-
-#endif /* getopt.h */
+++ /dev/null
-/* getopt_long and getopt_long_only entry points for GNU getopt.
- Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98
- Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-\f
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include "getopt.h"
-
-#if !defined __STDC__ || !__STDC__
-/* This is a separate conditional since some stdc systems
- reject `defined (const)'. */
-#ifndef const
-#define const
-#endif
-#endif
-
-#include <stdio.h>
-
-/* Comment out all this code if we are using the GNU C Library, and are not
- actually compiling the library itself. This code is part of the GNU C
- Library, but also included in many other GNU distributions. Compiling
- and linking in this code is a waste when using the GNU C library
- (especially if it is a shared library). Rather than having every GNU
- program understand `configure --with-gnu-libc' and omit the object files,
- it is simpler to just do this in the source for each such file. */
-
-#define GETOPT_INTERFACE_VERSION 2
-#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2
-#include <gnu-versions.h>
-#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION
-#define ELIDE_CODE
-#endif
-#endif
-
-#ifndef ELIDE_CODE
-
-
-/* This needs to come after some library #include
- to get __GNU_LIBRARY__ defined. */
-#ifdef __GNU_LIBRARY__
-#include <stdlib.h>
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-int
-getopt_long (argc, argv, options, long_options, opt_index)
- int argc;
- char *const *argv;
- const char *options;
- const struct option *long_options;
- int *opt_index;
-{
- return _getopt_internal (argc, argv, options, long_options, opt_index, 0);
-}
-
-/* Like getopt_long, but '-' as well as '--' can indicate a long option.
- If an option that starts with '-' (not '--') doesn't match a long option,
- but does match a short option, it is parsed as a short option
- instead. */
-
-int
-getopt_long_only (argc, argv, options, long_options, opt_index)
- int argc;
- char *const *argv;
- const char *options;
- const struct option *long_options;
- int *opt_index;
-{
- return _getopt_internal (argc, argv, options, long_options, opt_index, 1);
-}
-
-
-#endif /* Not ELIDE_CODE. */
-\f
-#ifdef TEST
-
-#include <stdio.h>
-
-int
-main (argc, argv)
- int argc;
- char **argv;
-{
- int c;
- int digit_optind = 0;
-
- while (1)
- {
- int this_option_optind = optind ? optind : 1;
- int option_index = 0;
- static struct option long_options[] =
- {
- {"add", 1, 0, 0},
- {"append", 0, 0, 0},
- {"delete", 1, 0, 0},
- {"verbose", 0, 0, 0},
- {"create", 0, 0, 0},
- {"file", 1, 0, 0},
- {0, 0, 0, 0}
- };
-
- c = getopt_long (argc, argv, "abc:d:0123456789",
- long_options, &option_index);
- if (c == -1)
- break;
-
- switch (c)
- {
- case 0:
- printf ("option %s", long_options[option_index].name);
- if (optarg)
- printf (" with arg %s", optarg);
- printf ("\n");
- break;
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- if (digit_optind != 0 && digit_optind != this_option_optind)
- printf ("digits occur in two different argv-elements.\n");
- digit_optind = this_option_optind;
- printf ("option %c\n", c);
- break;
-
- case 'a':
- printf ("option a\n");
- break;
-
- case 'b':
- printf ("option b\n");
- break;
-
- case 'c':
- printf ("option c with value `%s'\n", optarg);
- break;
-
- case 'd':
- printf ("option d with value `%s'\n", optarg);
- break;
-
- case '?':
- break;
-
- default:
- printf ("?? getopt returned character code 0%o ??\n", c);
- }
- }
-
- if (optind < argc)
- {
- printf ("non-option ARGV-elements: ");
- while (optind < argc)
- printf ("%s ", argv[optind++]);
- printf ("\n");
- }
-
- exit (0);
-}
-
-#endif /* TEST */
-:
#!/bin/sh
# gzexe: compressor for Unix executables.
# Use this only for binaries that you do not use frequently.
# On Ultrix, /bin/sh is too buggy, change the first line to: #!/bin/sh5
-# Copyright (C) 1998, 2002 Free Software Foundation
+# Copyright (C) 1998, 2002, 2004, 2006 Free Software Foundation
# Copyright (C) 1993 Jean-loup Gailly
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+tab=' '
+nl='
+'
+IFS=" $tab$nl"
-PATH="BINDIR:$PATH"
-x=`basename $0`
-if test $# = 0; then
- echo compress executables. original file foo is renamed to foo~
- echo usage: ${x} [-d] files...
- echo " -d decompress the executables"
- exit 1
-fi
+version='gzexe (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Jean-loup Gailly.'
+
+usage='Usage: gzexe [OPTION] FILE...
+Rename each FILE with a compressed version of itself, renaming FILE to FILE~.
+
+ -d Decompress each FILE instead of compressing it.
+ --help display this help and exit
+ --version output version information and exit
-set -C
-tmp=gz$$
-trap "rm -f $tmp; exit 1" HUP INT QUIT TRAP USR1 PIPE TERM
-: > $tmp || exit 1
+Report bugs to <bug-gzip@gnu.org>.'
+
+
+PATH="BINDIR:$PATH"
decomp=0
res=0
-test "$x" = "ungzexe" && decomp=1
-if test "x$1" = "x-d"; then
- decomp=1
- shift
-fi
-
-echo hi > zfoo1$$ || exit 1
-echo hi > zfoo2$$ || exit 1
-if test -z "`(${CPMOD-cpmod} zfoo1$$ zfoo2$$) 2>&1`"; then
- cpmod=${CPMOD-cpmod}
-fi
-rm -f zfoo[12]$$
-
-tail=""
-IFS="${IFS= }"; saveifs="$IFS"; IFS="${IFS}:"
-for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/tail; then
- tail="$dir/tail"
- break
- fi
+while :; do
+ case $1 in
+ -d) decomp=1; shift;;
+ --h*) exec echo "$usage";;
+ --v*) exec echo "$version";;
+ --) shift; break;;
+ *) break;;
+ esac
done
-IFS="$saveifs"
-if test -z "$tail"; then
- echo cannot find tail
+
+if test $# -eq 0; then
+ echo >&2 "$0: missing operand
+Try \`$0 --help' for more information."
exit 1
fi
-case `echo foo | $tail -n +1 2>/dev/null` in
-foo) tail="$tail -n";;
-esac
+
+tmp=
+trap 'res=$?
+ test -n "$tmp" && rm -f "$tmp"
+ (exit $res); exit $res
+' 0 1 2 3 5 10 13 15
+
+mktemp_status=
for i do
- if test ! -f "$i" ; then
- echo ${x}: $i not a file
- res=1
+ case $i in
+ -*) file=./$i;;
+ *) file=$i;;
+ esac
+ if test ! -f "$file" || test ! -r "$file"; then
+ res=$?
+ echo >&2 "$0: $i is not a readable regular file"
continue
fi
if test $decomp -eq 0; then
- if sed -e 1d -e 2q "$i" | grep "^skip=[0-9]*$" >/dev/null; then
- echo "${x}: $i is already gzexe'd"
+ if sed -e 1d -e 2q "$file" | grep "^skip=[0-9][0-9]*$" >/dev/null; then
+ echo >&2 "$0: $i is already gzexe'd"
continue
fi
fi
- if ls -l "$i" | grep '^...[sS]' > /dev/null; then
- echo "${x}: $i has setuid permission, unchanged"
+ if test -u "$file"; then
+ echo >&2 "$0: $i has setuid permission, unchanged"
continue
fi
- if ls -l "$i" | grep '^......[sS]' > /dev/null; then
- echo "${x}: $i has setgid permission, unchanged"
+ if test -g "$file"; then
+ echo >&2 "$0: $i has setgid permission, unchanged"
continue
fi
- case "`basename $i`" in
- gzip | tail | sed | chmod | ln | sleep | rm)
- echo "${x}: $i would depend on itself"; continue ;;
+ case /$file in
+ */basename | */cat | */chmod | */cp | \
+ */dirname | */echo | */expr | */gzip | \
+ */ln | */mkdir | */mktemp | */mv | */rm | */rmdir | \
+ */sed | */sh | */sleep | */test | */tail)
+ echo >&2 "$0: $i would depend on itself"; continue;;
esac
- if test -z "$cpmod"; then
- cp -p "$i" $tmp 2>/dev/null || cp "$i" $tmp
- if test -w $tmp 2>/dev/null; then
- writable=1
- else
- writable=0
- chmod u+w $tmp 2>/dev/null
- fi
- : >| $tmp # truncate the file, ignoring set -C
+
+ dir=`dirname "$file"` || dir=$TMPDIR
+ test -d "$dir" && test -w "$dir" && test -x "$dir" || dir=/tmp
+ test -n "$tmp" && rm -f "$tmp"
+ if test -z "$mktemp_status"; then
+ type mktemp >/dev/null 2>&1
+ mktemp_status=$?
+ fi
+ if test $mktemp_status -eq 0; then
+ tmp=`TMPDIR=$dir mktemp -t gzexeXXXXXX`
+ else
+ tmp=$dir/gzexe$$
+ fi && { cp -p "$file" "$tmp" 2>/dev/null || cp "$file" "$tmp"; } || {
+ res=$?
+ echo >&2 "$0: cannot copy $file"
+ continue
+ }
+ if test -w "$tmp"; then
+ writable=1
+ else
+ writable=0
+ chmod u+w "$tmp" || {
+ res=$?
+ echo >&2 "$0: cannot chmod $tmp"
+ continue
+ }
fi
if test $decomp -eq 0; then
- sed 1q $0 >> $tmp
- sed "s|^if tail|if $tail|" >> $tmp <<'EOF'
-skip=23
-set -C
+ (cat <<'EOF' &&
+#!/bin/sh
+skip=44
+
+tab=' '
+nl='
+'
+IFS=" $tab$nl"
+
umask=`umask`
umask 77
-tmpfile=`tempfile -p gztmp -d /tmp` || tmpfile=/tmp/gztmp.$$ || exit 1
-if tail +$skip "$0" | /bin/gzip -cd >> $tmpfile; then
+
+gztmpdir=
+trap 'res=$?
+ test -n "$gztmpdir" && rm -fr "$gztmpdir"
+ (exit $res); exit $res
+' 0 1 2 3 5 10 13 15
+
+if type mktemp >/dev/null 2>&1; then
+ gztmpdir=`mktemp -dt`
+else
+ gztmpdir=/tmp/gztmp$$; mkdir $gztmpdir
+fi || { (exit 127); exit 127; }
+
+gztmp=$gztmpdir/$0
+case $0 in
+-* | */*'
+') mkdir -p "$gztmp" && rmdir "$gztmp";;
+*/*) gztmp=$gztmpdir/`basename "$0"`;;
+esac || { (exit 127); exit 127; }
+
+case `echo X | tail -n +1 2>/dev/null` in
+X) tail_n=-n;;
+*) tail_n=;;
+esac
+if tail $tail_n +$skip <"$0" | gzip -cd > "$gztmp"; then
umask $umask
- /bin/chmod 700 $tmpfile
- prog="`echo $0 | /bin/sed 's|^.*/||'`"
- if /bin/ln $tmpfile "/tmp/$prog" 2>/dev/null; then
- trap '/bin/rm -f $tmpfile "/tmp/$prog"; exit $res' 0
- (/bin/sleep 5; /bin/rm -f $tmpfile "/tmp/$prog") 2>/dev/null &
- /tmp/"$prog" ${1+"$@"}; res=$?
- else
- trap '/bin/rm -f $tmpfile; exit $res' 0
- (/bin/sleep 5; /bin/rm -f $tmpfile) 2>/dev/null &
- $tmpfile ${1+"$@"}; res=$?
- fi
+ chmod 700 "$gztmp"
+ (sleep 5; rm -fr "$gztmpdir") 2>/dev/null &
+ "$gztmp" ${1+"$@"}; res=$?
else
- echo Cannot decompress $0; exit 1
+ echo >&2 "Cannot decompress $0"
+ (exit 127); res=127
fi; exit $res
EOF
- gzip -cv9 "$i" >> $tmp || {
- /bin/rm -f $tmp
- echo ${x}: compression not possible for $i, file unchanged.
- res=1
+ gzip -cv9 "$file") > "$tmp" || {
+ res=$?
+ echo >&2 "$0: compression not possible for $i, file unchanged."
continue
}
else
# decompression
- skip=23
- if sed -e 1d -e 2q "$i" | grep "^skip=[0-9]*$" >/dev/null; then
- eval `sed -e 1d -e 2q "$i"`
- fi
- if tail +$skip "$i" | gzip -cd > $tmp; then
- :
- else
- echo ${x}: $i probably not in gzexe format, file unchanged.
- res=1
+ skip=44
+ skip_line=`sed -e 1d -e 2q "$file"`
+ case $skip_line in
+ skip=[0-9] | skip=[0-9][0-9] | skip=[0-9][0-9][0-9])
+ eval "$skip_line";;
+ esac
+ case `echo X | tail -n +1 2>/dev/null` in
+ X) tail_n=-n;;
+ *) tail_n=;;
+ esac
+ tail $tail_n +$skip "$file" | gzip -cd > "$tmp" || {
+ res=$?
+ echo >&2 "$0: $i probably not in gzexe format, file unchanged."
continue
- fi
+ }
fi
- rm -f "$i~"
- mv "$i" "$i~" || {
- echo ${x}: cannot backup $i as $i~
- rm -f $tmp
- res=1
+ test $writable -eq 1 || chmod u-w "$tmp" || {
+ res=$?
+ echo >&2 "$0: $tmp: cannot chmod"
continue
}
- mv $tmp "$i" || cp -p $tmp "$i" 2>/dev/null || cp $tmp "$i" || {
- echo ${x}: cannot create $i
- rm -f $tmp
- res=1
+ ln -f "$file" "$file~" || {
+ res=$?
+ echo >&2 "$0: cannot backup $i as $i~"
continue
}
- rm -f $tmp
- if test -n "$cpmod"; then
- $cpmod "$i~" "$i" 2>/dev/null
- elif test $writable -eq 0; then
- chmod u-w $i 2>/dev/null
- fi
+ mv -f "$tmp" "$file" || {
+ res=$?
+ echo >&2 "$0: cannot rename $tmp to $i"
+ continue
+ }
+ tmp=
done
-exit $res
+(exit $res); exit $res
a format recognized by
.I gzip,
and if the option --stdout is also given, copy the input data without change
-to the standard ouput: let
+to the standard output: let
.I zcat
behave as
.I cat.
for reading and writing compressed data on tapes. (This example
assumes you are using the GNU version of tar.)
.SH BUGS
-The gzip format represents the the input size modulo 2^32, so the
+The gzip format represents the input size modulo 2^32, so the
--list option reports incorrect uncompressed sizes and compression
ratios for uncompressed files 4 GB and larger. To work around this
problem, you can use the following command to discover a large
/* gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
- * Copyright (C) 1999, 2001, 2002 Free Software Foundation, Inc.
- * Copyright (C) 1992-1993 Jean-loup Gailly
+
+ Copyright (C) 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/*
* The unzip code was written and put in the public domain by Mark Adler.
* Portions of the lzw code are derived from the public domain 'compress'
* written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
*/
static char *license_msg[] = {
-"Copyright 2002 Free Software Foundation",
-"Copyright 1992-1993 Jean-loup Gailly",
-"This program comes with ABSOLUTELY NO WARRANTY.",
-"You may redistribute copies of this program",
-"under the terms of the GNU General Public License.",
-"For more information about these matters, see the file named COPYING.",
+"Copyright (C) 2006 Free Software Foundation, Inc.",
+"Copyright (C) 1993 Jean-loup Gailly.",
+"This is free software. You may redistribute copies of it under the terms of",
+"the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.",
+"There is NO WARRANTY, to the extent permitted by law.",
0};
/* Compress files with zip algorithm and 'compress' interface.
- * See usage() and help() functions below for all options.
+ * See help() function below for all options.
* Outputs:
* file.gz: compressed file with same mode, owner, and utimes
* or stdout with -c option or if stdin used as input.
* example, foo.txt -> foo.tgz (.tgz must be reserved as shorthand for
* tar.gz). Similarly, foo.dir and foo.doc would both be mapped to foo.dgz.
* I also considered 12345678.txt -> 12345txt.gz but this truncates the name
- * too heavily. There is no ideal solution given the MSDOS 8+3 limitation.
+ * too heavily. There is no ideal solution given the MSDOS 8+3 limitation.
*
* For the meaning of all compilation flags, see comments in Makefile.in.
*/
#ifdef RCSID
-static char rcsid[] = "$Id: gzip.c,v 0.24 1993/06/24 10:52:07 jloup Exp $";
+static char rcsid[] = "$Id: gzip.c,v 1.11 2006/12/12 00:03:17 eggert Exp $";
#endif
#include <config.h>
#include "gzip.h"
#include "lzw.h"
#include "revision.h"
+
+#include "fcntl-safer.h"
#include "getopt.h"
+#include "stat-time.h"
+#include "timespec.h"
/* configuration */
extern int errno;
#endif
-#ifdef HAVE_DIRENT_H
-# include <dirent.h>
-# define NAMLEN(direct) strlen((direct)->d_name)
-# define DIR_OPT "DIRENT"
-#else
-# define dirent direct
-# define NAMLEN(direct) ((direct)->d_namlen)
-# ifdef HAVE_SYS_NDIR_H
-# include <sys/ndir.h>
-# define DIR_OPT "SYS_NDIR"
-# endif
-# ifdef HAVE_SYS_DIR_H
-# include <sys/dir.h>
-# define DIR_OPT "SYS_DIR"
-# endif
-# ifdef HAVE_NDIR_H
-# include <ndir.h>
-# define DIR_OPT "NDIR"
-# endif
-# ifndef DIR_OPT
-# define DIR_OPT "NO_DIR"
-# endif
-#endif
#ifndef NO_DIR
# define NO_DIR 0
#endif
+#if !NO_DIR
+# include <dirent.h>
+# ifndef _D_EXACT_NAMLEN
+# define _D_EXACT_NAMLEN(dp) strlen ((dp)->d_name)
+# endif
+#endif
#ifdef CLOSEDIR_VOID
# define CLOSEDIR(d) (closedir(d), 0)
# define CLOSEDIR(d) closedir(d)
#endif
-#if !defined(HAVE_LSTAT) && !defined(lstat)
-# define lstat(name, buf) stat(name, buf)
-#endif
-
-#ifdef HAVE_UTIME
-# ifdef HAVE_UTIME_H
-# include <utime.h>
-# define TIME_OPT "UTIME"
-# else
-# ifdef HAVE_SYS_UTIME_H
-# include <sys/utime.h>
-# define TIME_OPT "SYS_UTIME"
-# else
- struct utimbuf {
- time_t actime;
- time_t modtime;
- };
-# define TIME_OPT "STRUCT_UTIMBUF"
-# endif
-# endif
-#else
-# define TIME_OPT "NO_UTIME"
-#endif
-
-#if !defined(S_ISDIR) && defined(S_IFDIR)
-# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-#endif
-#if !defined(S_ISREG) && defined(S_IFREG)
-# define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-#endif
-
-typedef RETSIGTYPE (*sig_type) OF((int));
-
-#ifndef O_BINARY
-# define O_BINARY 0 /* creation mode for open() */
-#endif
-
-#ifndef O_CREAT
- /* Pure BSD system? */
-# include <sys/file.h>
-# ifndef O_CREAT
-# define O_CREAT FCREAT
-# endif
-# ifndef O_EXCL
-# define O_EXCL FEXCL
-# endif
+#ifndef NO_UTIME
+# include <utimens.h>
#endif
-#ifndef S_IRUSR
-# define S_IRUSR 0400
-#endif
-#ifndef S_IWUSR
-# define S_IWUSR 0200
-#endif
#define RW_USER (S_IRUSR | S_IWUSR) /* creation mode for open() */
#ifndef MAX_PATH_LEN
#define OFF_T_MAX (~ (off_t) 0 - OFF_T_MIN)
#endif
+/* Use SA_NOCLDSTOP as a proxy for whether the sigaction machinery is
+ present. */
+#ifndef SA_NOCLDSTOP
+# define SA_NOCLDSTOP 0
+# define sigprocmask(how, set, oset) /* empty */
+# define sigset_t int
+# if ! HAVE_SIGINTERRUPT
+# define siginterrupt(sig, flag) /* empty */
+# endif
+#endif
+
+#ifndef HAVE_WORKING_O_NOFOLLOW
+# define HAVE_WORKING_O_NOFOLLOW 0
+#endif
+
+#ifndef ELOOP
+# define ELOOP EINVAL
+#endif
+
/* Separator for file name parts (see shorten_name()) */
#ifdef NO_MULTIPLE_DOTS
# define PART_SEP "-"
int do_lzw = 0; /* generate output compatible with old compress (-Z) */
int test = 0; /* test .gz file integrity */
int foreground; /* set if program run in foreground */
-char *progname; /* program name */
+char *program_name; /* program name */
int maxbits = BITS; /* max bits per code for LZW */
int method = DEFLATED;/* compression method */
int level = 6; /* compression level */
int save_orig_name; /* set if original name must be saved */
int last_member; /* set for .zip and .Z files */
int part_nb; /* number of parts in .gz file */
-time_t time_stamp; /* original time stamp (modification time) */
+struct timespec time_stamp; /* original time stamp (modification time) */
off_t ifile_size; /* input file size, -1 for devices (debug only) */
char *env; /* contents of GZIP env variable */
char **args = NULL; /* argv pointer if GZIP env variable defined */
char *z_suffix; /* default suffix (can be set with --suffix) */
size_t z_len; /* strlen(z_suffix) */
+/* The set of signals that are caught. */
+static sigset_t caught_signals;
+
+/* If nonzero then exit with status 1, rather than with the usual
+ signal status, on receipt of a signal with this value. This
+ suppresses a "Broken Pipe" message with some shells. */
+static int volatile exiting_signal;
+
+/* If nonnegative, close this file descriptor and unlink ofname on error. */
+static int volatile remove_ofname_fd = -1;
+
off_t bytes_in; /* number of input bytes */
off_t bytes_out; /* number of output bytes */
off_t total_in; /* input bytes for all files */
off_t total_out; /* output bytes for all files */
char ifname[MAX_PATH_LEN]; /* input file name */
char ofname[MAX_PATH_LEN]; /* output file name */
-int remove_ofname = 0; /* remove output file on error */
struct stat istat; /* status for input file */
int ifd; /* input file descriptor */
int ofd; /* output file descriptor */
/* local functions */
-local void usage OF((void));
+local void try_help OF((void)) ATTRIBUTE_NORETURN;
local void help OF((void));
local void license OF((void));
local void version OF((void));
local void treat_stdin OF((void));
local void treat_file OF((char *iname));
local int create_outfile OF((void));
-local int do_stat OF((char *name, struct stat *sbuf));
local char *get_suffix OF((char *name));
-local int get_istat OF((char *iname, struct stat *sbuf));
+local int open_input_file OF((char *iname, struct stat *sbuf));
local int make_ofname OF((void));
-local int same_file OF((struct stat *stat1, struct stat *stat2));
-local int name_too_long OF((char *name, struct stat *statb));
local void shorten_name OF((char *name));
local int get_method OF((int in));
local void do_list OF((int ifd, int method));
local int check_ofname OF((void));
local void copy_stat OF((struct stat *ifstat));
-local void do_exit OF((int exitcode));
+local void install_signal_handlers OF((void));
+local void remove_output_file OF((void));
+local RETSIGTYPE abort_gzip_signal OF((int));
+local void do_exit OF((int exitcode)) ATTRIBUTE_NORETURN;
int main OF((int argc, char **argv));
int (*work) OF((int infile, int outfile)) = zip; /* function to call */
#if ! NO_DIR
-local void treat_dir OF((char *dir));
-#endif
-#ifdef HAVE_UTIME
-local void reset_times OF((char *name, struct stat *statb));
+local void treat_dir OF((int fd, char *dir));
#endif
#define strequ(s1, s2) (strcmp((s1),(s2)) == 0)
-/* ======================================================================== */
-local void usage()
+static void
+try_help ()
{
- printf ("usage: %s [-%scdfhlLnN%stvV19] [-S suffix] [file ...]\n",
- progname,
- O_BINARY ? "a" : "", NO_DIR ? "" : "r");
+ fprintf (stderr, "Try `%s --help' for more information.\n",
+ program_name);
+ do_exit (ERROR);
}
/* ======================================================================== */
local void help()
{
static char *help_msg[] = {
+ "Compress or uncompress FILEs (by default, compress FILES in-place).",
+ "",
+ "Mandatory arguments to long options are mandatory for short options too.",
+ "",
#if O_BINARY
- " -a --ascii ascii text; convert end-of-lines using local conventions",
-#endif
- " -c --stdout write on standard output, keep original files unchanged",
- " -d --decompress decompress",
-/* -e --encrypt encrypt */
- " -f --force force overwrite of output file and compress links",
- " -h --help give this help",
-/* -k --pkzip force output in pkzip format */
- " -l --list list compressed file contents",
- " -L --license display software license",
+ " -a, --ascii ascii text; convert end-of-line using local conventions",
+#endif
+ " -c, --stdout write on standard output, keep original files unchanged",
+ " -d, --decompress decompress",
+/* -e, --encrypt encrypt */
+ " -f, --force force overwrite of output file and compress links",
+ " -h, --help give this help",
+/* -k, --pkzip force output in pkzip format */
+ " -l, --list list compressed file contents",
+ " -L, --license display software license",
#ifdef UNDOCUMENTED
- " -m --no-time do not save or restore the original modification time",
- " -M --time save or restore the original modification time",
+ " -m, --no-time do not save or restore the original modification time",
+ " -M, --time save or restore the original modification time",
#endif
- " -n --no-name do not save or restore the original name and time stamp",
- " -N --name save or restore the original name and time stamp",
- " -q --quiet suppress all warnings",
+ " -n, --no-name do not save or restore the original name and time stamp",
+ " -N, --name save or restore the original name and time stamp",
+ " -q, --quiet suppress all warnings",
#if ! NO_DIR
- " -r --recursive operate recursively on directories",
-#endif
- " -S .suf --suffix .suf use suffix .suf on compressed files",
- " -t --test test compressed file integrity",
- " -v --verbose verbose mode",
- " -V --version display version number",
- " -1 --fast compress faster",
- " -9 --best compress better",
+ " -r, --recursive operate recursively on directories",
+#endif
+ " -S, --suffix=SUF use suffix SUF on compressed files",
+ " -t, --test test compressed file integrity",
+ " -v, --verbose verbose mode",
+ " -V, --version display version number",
+ " -1, --fast compress faster",
+ " -9, --best compress better",
#ifdef LZW
- " -Z --lzw produce output compatible with old compress",
- " -b --bits maxbits max number of bits per code (implies -Z)",
+ " -Z, --lzw produce output compatible with old compress",
+ " -b, --bits=BITS max number of bits per code (implies -Z)",
#endif
" --rsyncable Make rsync-friendly archive",
- " file... files to (de)compress. If none given, use standard input.",
+ "",
+ "With no FILE, or when FILE is -, read standard input.",
+ "",
"Report bugs to <bug-gzip@gnu.org>.",
0};
char **p = help_msg;
- printf ("%s %s\n(%s)\n", progname, VERSION, REVDATE);
- usage();
+ printf ("Usage: %s [OPTION]... [FILE]...\n", program_name);
while (*p) printf ("%s\n", *p++);
}
{
char **p = license_msg;
- printf ("%s %s\n(%s)\n", progname, VERSION, REVDATE);
+ printf ("%s %s\n", program_name, VERSION);
while (*p) printf ("%s\n", *p++);
}
local void version()
{
license ();
- printf ("Compilation options:\n%s %s ", DIR_OPT, TIME_OPT);
-#ifdef STDC_HEADERS
- printf ("STDC_HEADERS ");
-#endif
-#ifdef HAVE_UNISTD_H
- printf ("HAVE_UNISTD_H ");
-#endif
-#ifdef HAVE_MEMORY_H
- printf ("HAVE_MEMORY_H ");
-#endif
-#ifdef HAVE_STRING_H
- printf ("HAVE_STRING_H ");
-#endif
-#ifdef HAVE_LSTAT
- printf ("HAVE_LSTAT ");
-#endif
-#ifdef NO_MULTIPLE_DOTS
- printf ("NO_MULTIPLE_DOTS ");
-#endif
-#ifdef HAVE_CHOWN
- printf ("HAVE_CHOWN ");
-#endif
-#ifdef PROTO
- printf ("PROTO ");
-#endif
-#ifdef ASMV
- printf ("ASMV ");
-#endif
-#ifdef DEBUG
- printf ("DEBUG ");
-#endif
-#ifdef DYN_ALLOC
- printf ("DYN_ALLOC ");
-#endif
-#ifdef MAXSEG_64K
- printf ("MAXSEG_64K");
-#endif
printf ("\n");
printf ("Written by Jean-loup Gailly.\n");
}
char *string;
{
int e = errno;
- fprintf(stderr, "%s: ", progname);
+ fprintf (stderr, "%s: ", program_name);
errno = e;
perror(string);
exit_code = ERROR;
int argc;
char **argv;
{
- int file_count; /* number of files to precess */
- int proglen; /* length of progname */
+ int file_count; /* number of files to process */
+ size_t proglen; /* length of program_name */
int optc; /* current option */
EXPAND(argc, argv); /* wild card expansion if necessary */
- progname = base_name (argv[0]);
- proglen = strlen(progname);
+ program_name = gzip_base_name (argv[0]);
+ proglen = strlen (program_name);
/* Suppress .exe for MSDOS, OS/2 and VMS: */
- if (proglen > 4 && strequ(progname+proglen-4, ".exe")) {
- progname[proglen-4] = '\0';
- }
+ if (4 < proglen && strequ (program_name + proglen - 4, ".exe"))
+ program_name[proglen - 4] = '\0';
/* Add options in GZIP environment variable if there is one */
env = add_envopt(&argc, &argv, OPTIONS_VAR);
if (env != NULL) args = argv;
- foreground = signal(SIGINT, SIG_IGN) != SIG_IGN;
- if (foreground) {
- (void) signal (SIGINT, (sig_type)abort_gzip_signal);
- }
-#ifdef SIGTERM
- if (signal(SIGTERM, SIG_IGN) != SIG_IGN) {
- (void) signal(SIGTERM, (sig_type)abort_gzip_signal);
- }
-#endif
-#ifdef SIGHUP
- if (signal(SIGHUP, SIG_IGN) != SIG_IGN) {
- (void) signal(SIGHUP, (sig_type)abort_gzip_signal);
- }
-#endif
-
#ifndef GNU_STANDARD
/* For compatibility with old compress, use program name as an option.
* If you compile with -DGNU_STANDARD, this program will behave as
* Systems which do not support links can still use -d or -dc.
* Ignore an .exe extension for MSDOS, OS/2 and VMS.
*/
- if ( strncmp(progname, "un", 2) == 0 /* ungzip, uncompress */
- || strncmp(progname, "gun", 3) == 0) { /* gunzip */
+ if (strncmp (program_name, "un", 2) == 0 /* ungzip, uncompress */
+ || strncmp (program_name, "gun", 3) == 0) /* gunzip */
decompress = 1;
- } else if (strequ(progname+1, "cat") /* zcat, pcat, gcat */
- || strequ(progname, "gzcat")) { /* gzcat */
+ else if (strequ (program_name + 1, "cat") /* zcat, pcat, gcat */
+ || strequ (program_name, "gzcat")) /* gzcat */
decompress = to_stdout = 1;
- }
#endif
z_suffix = Z_SUFFIX;
if (! ('0' <= *optarg && *optarg <= '9'))
{
fprintf (stderr, "%s: -b operand is not an integer\n",
- progname);
- usage ();
- do_exit (ERROR);
+ program_name);
+ try_help ();
}
break;
case 'c':
decompress = 1; break;
case 'f':
force++; break;
- case 'h': case 'H': case '?':
+ case 'h': case 'H':
help(); do_exit(OK); break;
case 'l':
list = decompress = to_stdout = 1; break;
quiet = 1; verbose = 0; break;
case 'r':
#if NO_DIR
- fprintf(stderr, "%s: -r not supported on this system\n", progname);
- usage();
- do_exit(ERROR); break;
+ fprintf (stderr, "%s: -r not supported on this system\n",
+ program_name);
+ try_help ();
#else
- recursive = 1; break;
+ recursive = 1;
#endif
case 'R':
rsync = 1; break;
do_lzw = 1; break;
#else
fprintf(stderr, "%s: -Z not supported in this version\n",
- progname);
- usage();
- do_exit(ERROR); break;
+ program_name);
+ try_help ();
+ break;
#endif
case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
break;
default:
/* Error message already emitted by getopt_long. */
- usage();
- do_exit(ERROR);
+ try_help ();
}
} /* loop on all arguments */
-#ifdef SIGPIPE
- /* Ignore "Broken Pipe" message with --quiet */
- if (quiet && signal (SIGPIPE, SIG_IGN) != SIG_IGN)
- signal (SIGPIPE, (sig_type) abort_gzip_signal);
-#endif
-
/* By default, save name and timestamp on compression but do not
* restore them on decompression.
*/
#else
if (ascii && !quiet) {
fprintf(stderr, "%s: option --ascii ignored on this system\n",
- progname);
+ program_name);
}
#endif
if ((z_len == 0 && !decompress) || z_len > MAX_SUFFIX) {
fprintf(stderr, "%s: incorrect suffix '%s'\n",
- progname, z_suffix);
+ program_name, z_suffix);
do_exit(ERROR);
}
if (do_lzw && !decompress) work = lzw;
ALLOC(ush, tab_prefix1, 1L<<(BITS-1));
#endif
+ exiting_signal = quiet ? SIGPIPE : 0;
+ install_signal_handlers ();
+
/* And get to work */
if (file_count != 0) {
if (to_stdout && !test && !list && (!decompress || !ascii)) {
*/
fprintf(stderr,
"%s: compressed data not %s a terminal. Use -f to force %scompression.\n",
- progname, decompress ? "read from" : "written to",
+ program_name, decompress ? "read from" : "written to",
decompress ? "de" : "");
- fprintf(stderr,"For help, type: %s -h\n", progname);
+ fprintf (stderr, "For help, type: %s -h\n", program_name);
do_exit(ERROR);
}
strcpy(ofname, "stdout");
/* Get the time stamp on the input file. */
- time_stamp = 0; /* time unknown by default */
+ time_stamp.tv_nsec = -1; /* The time is unknown by default. */
#ifndef NO_STDIN_FSTAT
if (list || !no_time) {
# ifdef NO_PIPE_TIMESTAMP
if (S_ISREG(istat.st_mode))
# endif
- time_stamp = istat.st_mtime;
+ time_stamp = get_stat_mtime (&istat);
#endif /* NO_STDIN_FSTAT */
}
ifile_size = -1L; /* convention for unknown size */
}
/* Check if the input file is present, set ifname and istat: */
- if (get_istat(iname, &istat) != OK) return;
+ ifd = open_input_file (iname, &istat);
+ if (ifd < 0)
+ return;
/* If the input name is that of a directory, recurse or ignore: */
if (S_ISDIR(istat.st_mode)) {
#if ! NO_DIR
if (recursive) {
- struct stat st;
- st = istat;
- treat_dir(iname);
+ treat_dir (ifd, iname);
/* Warning: ifname is now garbage */
-# ifndef NO_UTIME
- reset_times (iname, &st);
-# endif
- } else
+ return;
+ }
#endif
- WARN((stderr,"%s: %s is a directory -- ignored\n", progname, ifname));
+ close (ifd);
+ WARN ((stderr, "%s: %s is a directory -- ignored\n",
+ program_name, ifname));
return;
}
if (!S_ISREG(istat.st_mode)) {
WARN((stderr,
"%s: %s is not a directory or a regular file - ignored\n",
- progname, ifname));
+ program_name, ifname));
+ close (ifd);
return;
}
+
+ if (istat.st_mode & S_ISUID)
+ {
+ WARN ((stderr, "%s: %s is set-user-ID on execution - ignored\n",
+ program_name, ifname));
+ close (ifd);
+ return;
+ }
+ if (istat.st_mode & S_ISGID)
+ {
+ WARN ((stderr, "%s: %s is set-group-ID on execution - ignored\n",
+ program_name, ifname));
+ close (ifd);
+ return;
+ }
+ if (istat.st_mode & S_ISVTX)
+ {
+ WARN ((stderr, "%s: %s has the sticky bit set - file ignored\n",
+ program_name, ifname));
+ close (ifd);
+ return;
+ }
+
if (istat.st_nlink > 1 && !to_stdout && !force) {
WARN((stderr, "%s: %s has %lu other link%c -- unchanged\n",
- progname, ifname, (unsigned long) istat.st_nlink - 1,
+ program_name, ifname, (unsigned long) istat.st_nlink - 1,
istat.st_nlink > 2 ? 's' : ' '));
+ close (ifd);
return;
}
ifile_size = istat.st_size;
- time_stamp = no_time && !list ? 0 : istat.st_mtime;
+ if (no_time && !list)
+ time_stamp.tv_nsec = -1;
+ else
+ time_stamp = get_stat_mtime (&istat);
/* Generate output file name. For -r and (-t or -l), skip files
* without a valid gzip suffix (check done in make_ofname).
strcpy(ofname, "stdout");
} else if (make_ofname() != OK) {
+ close (ifd);
return;
}
- /* Open the input file and determine compression method. The mode
- * parameter is ignored but required by some systems (VMS) and forbidden
- * on other systems (MacOS).
- */
- ifd = OPEN(ifname, ascii && !decompress ? O_RDONLY : O_RDONLY | O_BINARY,
- RW_USER);
- if (ifd == -1) {
- progerror(ifname);
- return;
- }
clear_bufs(); /* clear input and output buffers */
part_nb = 0;
}
if (list) {
do_list(ifd, method);
- close(ifd);
+ if (close (ifd) != 0)
+ read_error ();
return;
}
*/
if (to_stdout) {
ofd = fileno(stdout);
- /* keep remove_ofname as zero */
+ /* Keep remove_ofname_fd negative. */
} else {
if (create_outfile() != OK) return;
if (!decompress && save_orig_name && !verbose && !quiet) {
fprintf(stderr, "%s: %s compressed to %s\n",
- progname, ifname, ofname);
+ program_name, ifname, ofname);
}
}
/* Keep the name even if not truncated except with --no-name: */
bytes_out = 0; /* required for length check */
}
- close(ifd);
- if (!to_stdout) {
- /* Copy modes, times, and ownership */
- copy_stat(&istat);
- if (close(ofd))
- write_error();
- remove_ofname = 0;
-
- /* It's now safe to remove the input file: */
- if (xunlink (ifname)) {
- int e = errno;
- WARN((stderr, "%s: ", progname));
- if (!quiet) {
- errno = e;
- perror(ifname);
- }
- }
- }
+ if (close (ifd) != 0)
+ read_error ();
+
+ if (!to_stdout)
+ {
+ sigset_t oldset;
+ int unlink_errno;
+
+ copy_stat (&istat);
+ if (close (ofd) != 0)
+ write_error ();
+
+ sigprocmask (SIG_BLOCK, &caught_signals, &oldset);
+ remove_ofname_fd = -1;
+ unlink_errno = xunlink (ifname) == 0 ? 0 : errno;
+ sigprocmask (SIG_SETMASK, &oldset, NULL);
+
+ if (unlink_errno)
+ {
+ WARN ((stderr, "%s: ", program_name));
+ if (!quiet)
+ {
+ errno = unlink_errno;
+ perror (ifname);
+ }
+ }
+ }
+
if (method == -1) {
- if (!to_stdout) xunlink (ofname);
+ if (!to_stdout)
+ remove_output_file ();
return;
}
+
/* Display statistics */
if(verbose) {
if (test) {
*/
local int create_outfile()
{
- struct stat ostat; /* stat for ofname */
- int flags = O_WRONLY | O_CREAT | O_EXCL | O_BINARY;
+ int name_shortened = 0;
+ int flags = (O_WRONLY | O_CREAT | O_EXCL
+ | (ascii && decompress ? 0 : O_BINARY));
- if (ascii && decompress) {
- flags &= ~O_BINARY; /* force ascii text mode */
- }
- for (;;) {
- /* Make sure that ofname is not an existing file */
- if (check_ofname() != OK) {
- close(ifd);
- return ERROR;
- }
- /* Create the output file */
- remove_ofname = 1;
- ofd = OPEN(ofname, flags, RW_USER);
- if (ofd == -1) {
- progerror(ofname);
- close(ifd);
- return ERROR;
- }
+ for (;;)
+ {
+ int open_errno;
+ sigset_t oldset;
- /* Check for name truncation on new file (1234567890123.gz) */
-#ifdef NO_FSTAT
- if (stat(ofname, &ostat) != 0) {
-#else
- if (fstat(ofd, &ostat) != 0) {
+ sigprocmask (SIG_BLOCK, &caught_signals, &oldset);
+ remove_ofname_fd = ofd = OPEN (ofname, flags, RW_USER);
+ open_errno = errno;
+ sigprocmask (SIG_SETMASK, &oldset, NULL);
+
+ if (0 <= ofd)
+ break;
+
+ switch (open_errno)
+ {
+#ifdef ENAMETOOLONG
+ case ENAMETOOLONG:
+ shorten_name (ofname);
+ name_shortened = 1;
+ break;
#endif
- progerror(ofname);
- close(ifd); close(ofd);
- xunlink (ofname);
- return ERROR;
- }
- if (!name_too_long(ofname, &ostat)) return OK;
- if (decompress) {
- /* name might be too long if an original name was saved */
- WARN((stderr, "%s: %s: warning, name truncated\n",
- progname, ofname));
- return OK;
+ case EEXIST:
+ if (check_ofname () != OK)
+ {
+ close (ifd);
+ return ERROR;
+ }
+ break;
+
+ default:
+ progerror (ofname);
+ close (ifd);
+ return ERROR;
}
- close(ofd);
- xunlink (ofname);
-#ifdef NO_MULTIPLE_DOTS
- /* Should never happen, see check_ofname() */
- fprintf(stderr, "%s: %s: name too long\n", progname, ofname);
- do_exit(ERROR);
-#endif
- shorten_name(ofname);
}
-}
-/* ========================================================================
- * Use lstat if available, except for -c or -f. Use stat otherwise.
- * This allows links when not removing the original file.
- */
-local int do_stat(name, sbuf)
- char *name;
- struct stat *sbuf;
-{
- errno = 0;
- if (!to_stdout && !force) {
- return lstat(name, sbuf);
+ if (name_shortened && decompress)
+ {
+ /* name might be too long if an original name was saved */
+ WARN ((stderr, "%s: %s: warning, name truncated\n",
+ program_name, ofname));
}
- return stat(name, sbuf);
+
+ return OK;
}
/* ========================================================================
}
+/* Open file NAME with the given flags and mode and store its status
+ into *ST. Return a file descriptor to the newly opened file, or -1
+ (setting errno) on failure. */
+static int
+open_and_stat (char *name, int flags, mode_t mode, struct stat *st)
+{
+ int fd;
+
+ /* Refuse to follow symbolic links unless -c or -f. */
+ if (!to_stdout && !force)
+ {
+ if (HAVE_WORKING_O_NOFOLLOW)
+ flags |= O_NOFOLLOW;
+ else
+ {
+#if HAVE_LSTAT || defined lstat
+ if (lstat (name, st) != 0)
+ return -1;
+ else if (S_ISLNK (st->st_mode))
+ {
+ errno = ELOOP;
+ return -1;
+ }
+#endif
+ }
+ }
+
+ fd = OPEN (name, flags, mode);
+ if (0 <= fd && fstat (fd, st) != 0)
+ {
+ int e = errno;
+ close (fd);
+ errno = e;
+ return -1;
+ }
+ return fd;
+}
+
+
/* ========================================================================
* Set ifname to the input file name (with a suffix appended if necessary)
* and istat to its stats. For decompression, if no file exists with the
* original name, try adding successively z_suffix, .gz, .z, -z and .Z.
* For MSDOS, we try only z_suffix and z.
- * Return OK or ERROR.
+ * Return an open file descriptor or -1.
*/
-local int get_istat(iname, sbuf)
+static int
+open_input_file (iname, sbuf)
char *iname;
struct stat *sbuf;
{
#ifdef NO_MULTIPLE_DOTS
char *dot; /* pointer to ifname extension, or NULL */
#endif
+ int fd;
+ int open_flags = (O_RDONLY | O_NONBLOCK | O_NOCTTY
+ | (ascii && !decompress ? 0 : O_BINARY));
*suf = z_suffix;
strcpy(ifname, iname);
/* If input file exists, return OK. */
- if (do_stat(ifname, sbuf) == 0) return OK;
+ fd = open_and_stat (ifname, open_flags, RW_USER, sbuf);
+ if (0 <= fd)
+ return fd;
if (!decompress || errno != ENOENT) {
progerror(ifname);
- return ERROR;
+ return -1;
}
/* file.ext doesn't exist, try adding a suffix (after removing any
* version number for VMS).
s = get_suffix(ifname);
if (s != NULL) {
progerror(ifname); /* ifname already has z suffix and does not exist */
- return ERROR;
+ return -1;
}
#ifdef NO_MULTIPLE_DOTS
dot = strrchr(ifname, '.');
if (sizeof ifname <= ilen + strlen (s))
goto name_too_long;
strcat(ifname, s);
- if (do_stat(ifname, sbuf) == 0) return OK;
+ fd = open_and_stat (ifname, open_flags, RW_USER, sbuf);
+ if (0 <= fd)
+ return fd;
+ if (errno != ENOENT)
+ {
+ progerror (ifname);
+ return -1;
+ }
if (strequ (s0, z_suffix))
z_suffix_errno = errno;
} while (*++suf != NULL);
strcat(ifname, z_suffix);
errno = z_suffix_errno;
progerror(ifname);
- return ERROR;
-
+ return -1;
+
name_too_long:
- fprintf (stderr, "%s: %s: file name too long\n", progname, iname);
+ fprintf (stderr, "%s: %s: file name too long\n", program_name, iname);
exit_code = ERROR;
- return ERROR;
+ return -1;
}
/* ========================================================================
/* Avoid annoying messages with -r */
if (verbose || (!recursive && !quiet)) {
WARN((stderr,"%s: %s: unknown suffix -- ignored\n",
- progname, ifname));
+ program_name, ifname));
}
return WARNING;
}
} else if (suff != NULL) {
/* Avoid annoying messages with -r (see treat_dir()) */
if (verbose || (!recursive && !quiet)) {
- /* don't use WARN -- it will cause an exit_code of 2 */
- fprintf(stderr, "%s: %s already has %s suffix -- unchanged\n",
- progname, ifname, suff);
+ /* Don't use WARN, as it affects exit status. */
+ fprintf (stderr, "%s: %s already has %s suffix -- unchanged\n",
+ program_name, ifname, suff);
}
return WARNING;
} else {
strcat(ofname, "gz"); /* enough room */
return OK;
}
- /* On the Atari and some versions of MSDOS, name_too_long()
- * does not work correctly because of a bug in stat(). So we
+ /* On the Atari and some versions of MSDOS,
+ * ENAMETOOLONG does not work correctly. So we
* must truncate here.
*/
} else if (strlen(suff)-1 + z_len > MAX_SUFFIX) {
return OK;
name_too_long:
- WARN ((stderr, "%s: %s: file name too long\n", progname, ifname));
+ WARN ((stderr, "%s: %s: file name too long\n", program_name, ifname));
return WARNING;
}
if (method != DEFLATED) {
fprintf(stderr,
"%s: %s: unknown method %d -- not supported\n",
- progname, ifname, method);
+ program_name, ifname, method);
exit_code = ERROR;
return -1;
}
if ((flags & ENCRYPTED) != 0) {
fprintf(stderr,
"%s: %s is encrypted -- not supported\n",
- progname, ifname);
+ program_name, ifname);
exit_code = ERROR;
return -1;
}
if ((flags & CONTINUATION) != 0) {
fprintf(stderr,
"%s: %s is a a multi-part gzip file -- not supported\n",
- progname, ifname);
+ program_name, ifname);
exit_code = ERROR;
if (force <= 1) return -1;
}
if ((flags & RESERVED) != 0) {
fprintf(stderr,
"%s: %s has flags 0x%x -- not supported\n",
- progname, ifname, flags);
+ program_name, ifname, flags);
exit_code = ERROR;
if (force <= 1) return -1;
}
stamp |= ((ulg)get_byte()) << 8;
stamp |= ((ulg)get_byte()) << 16;
stamp |= ((ulg)get_byte()) << 24;
- if (stamp != 0 && !no_time) time_stamp = stamp;
+ if (stamp != 0 && !no_time)
+ {
+ time_stamp.tv_sec = stamp;
+ time_stamp.tv_nsec = 0;
+ }
(void)get_byte(); /* Ignore extra flags for the moment */
(void)get_byte(); /* Ignore OS type for the moment */
part |= ((unsigned)get_byte())<<8;
if (verbose) {
fprintf(stderr,"%s: %s: part number %u\n",
- progname, ifname, part);
+ program_name, ifname, part);
}
}
if ((flags & EXTRA_FIELD) != 0) {
len |= ((unsigned)get_byte())<<8;
if (verbose) {
fprintf(stderr,"%s: %s: extra field of %u bytes ignored\n",
- progname, ifname, len);
+ program_name, ifname, len);
}
while (len--) (void)get_byte();
}
do {c=get_byte();} while (c != 0);
} else {
/* Copy the base name. Keep a directory prefix intact. */
- char *p = base_name (ofname);
+ char *p = gzip_base_name (ofname);
char *base = p;
- char *base2;
for (;;) {
*p = (char)get_char();
if (*p++ == '\0') break;
if (p >= ofname+sizeof(ofname)) {
- error("corrupted input -- file name too large");
+ gzip_error ("corrupted input -- file name too large");
}
}
- base2 = base_name (base);
- strcpy(base, base2);
+ p = gzip_base_name (base);
+ memmove (base, p, strlen (p) + 1);
/* If necessary, adapt the name to local OS conventions: */
if (!list) {
MAKE_LEGAL_NAME(base);
if (method >= 0) return method;
if (part_nb == 1) {
- fprintf(stderr, "\n%s: %s: not in gzip format\n", progname, ifname);
+ fprintf (stderr, "\n%s: %s: not in gzip format\n",
+ program_name, ifname);
exit_code = ERROR;
return -1;
} else {
{
if (verbose)
WARN ((stderr, "\n%s: %s: decompression OK, trailing zero bytes ignored\n",
- progname, ifname));
+ program_name, ifname));
return -3;
}
}
WARN((stderr, "\n%s: %s: decompression OK, trailing garbage ignored\n",
- progname, ifname));
+ program_name, ifname));
return -2;
}
}
"lzh ", /* 3 */
"", "", "", "", /* 4 to 7 reserved */
"defla"}; /* 8 */
- char *date;
int positive_off_t_width = 1;
off_t o;
}
}
#endif /* RECORD_IO */
- date = ctime((time_t*)&time_stamp) + 4; /* skip the day of the week */
- date[12] = '\0'; /* suppress the 1/100sec and the year */
- if (verbose) {
- printf("%5s %08lx %11s ", methods[method], crc, date);
- }
+ if (verbose)
+ {
+ struct tm *tm = localtime (&time_stamp.tv_sec);
+ printf ("%5s %08lx ", methods[method], crc);
+ if (tm)
+ printf ("%s%3d %02d:%02d ",
+ ("Jan\0Feb\0Mar\0Apr\0May\0Jun\0Jul\0Aug\0Sep\0Oct\0Nov\0Dec"
+ + 4 * tm->tm_mon),
+ tm->tm_mday, tm->tm_hour, tm->tm_min);
+ else
+ printf ("??? ?? ??:?? ");
+ }
fprint_off(stdout, bytes_in, positive_off_t_width);
printf(" ");
fprint_off(stdout, bytes_out, positive_off_t_width);
printf(" %s\n", ofname);
}
-/* ========================================================================
- * Return true if the two stat structures correspond to the same file.
- */
-local int same_file(stat1, stat2)
- struct stat *stat1;
- struct stat *stat2;
-{
- return stat1->st_ino == stat2->st_ino
- && stat1->st_dev == stat2->st_dev
-#ifdef NO_ST_INO
- /* Can't rely on st_ino and st_dev, use other fields: */
- && stat1->st_mode == stat2->st_mode
- && stat1->st_uid == stat2->st_uid
- && stat1->st_gid == stat2->st_gid
- && stat1->st_size == stat2->st_size
- && stat1->st_atime == stat2->st_atime
- && stat1->st_mtime == stat2->st_mtime
- && stat1->st_ctime == stat2->st_ctime
-#endif
- ;
-}
-
-/* ========================================================================
- * Return true if a file name is ambiguous because the operating system
- * truncates file names.
- */
-local int name_too_long(name, statb)
- char *name; /* file name to check */
- struct stat *statb; /* stat buf for this file name */
-{
- int s = strlen(name);
- char c = name[s-1];
- struct stat tstat; /* stat for truncated name */
- int res;
-
- tstat = *statb; /* Just in case OS does not fill all fields */
- name[s-1] = '\0';
- res = lstat(name, &tstat) == 0 && same_file(statb, &tstat);
- name[s-1] = c;
- Trace((stderr, " too_long(%s) => %d\n", name, res));
- return res;
-}
-
/* ========================================================================
* Shorten the given name by one character, or replace a .tar extension
* with .tgz. Truncate the last part of the name which is longer than
len = strlen(name);
if (decompress) {
- if (len <= 1) error("name too short");
+ if (len <= 1)
+ gzip_error ("name too short");
name[len-1] = '\0';
return;
}
p = get_suffix(name);
- if (p == NULL) error("can't recover suffix\n");
+ if (! p)
+ gzip_error ("can't recover suffix\n");
*p = '\0';
save_orig_name = 1;
trunc--;
} else {
trunc = strrchr(name, PART_SEP[0]);
- if (trunc == NULL) error("internal error in shorten_name");
+ if (!trunc)
+ gzip_error ("internal error in shorten_name");
if (trunc[1] == '\0') trunc--; /* force truncation */
}
strcpy(trunc, z_suffix);
}
/* ========================================================================
- * If compressing to a file, check if ofname is not ambiguous
- * because the operating system truncates names. Otherwise, generate
- * a new ofname and save the original name in the compressed file.
- * If the compressed file already exists, ask for confirmation.
- * The check for name truncation is made dynamically, because different
- * file systems on the same OS might use different truncation rules (on SVR4
- * s5 truncates to 14 chars and ufs does not truncate).
- * This function returns -1 if the file must be skipped, and
- * updates save_orig_name if necessary.
- * IN assertions: save_orig_name is already set if ofname has been
- * already truncated because of NO_MULTIPLE_DOTS. The input file has
- * already been open and istat is set.
+ * The compressed file already exists, so ask for confirmation.
+ * Return ERROR if the file must be skipped.
*/
local int check_ofname()
{
- struct stat ostat; /* stat for ofname */
-
-#ifdef ENAMETOOLONG
- /* Check for strictly conforming Posix systems (which return ENAMETOOLONG
- * instead of silently truncating filenames).
- */
- errno = 0;
- while (lstat(ofname, &ostat) != 0) {
- if (errno != ENAMETOOLONG) return 0; /* ofname does not exist */
- shorten_name(ofname);
- }
-#else
- if (lstat(ofname, &ostat) != 0) return 0;
-#endif
- /* Check for name truncation on existing file. Do this even on systems
- * defining ENAMETOOLONG, because on most systems the strict Posix
- * behavior is disabled by default (silent name truncation allowed).
- */
- if (!decompress && name_too_long(ofname, &ostat)) {
- shorten_name(ofname);
- if (lstat(ofname, &ostat) != 0) return 0;
- }
-
- /* Check that the input and output files are different (could be
- * the same by name truncation or links).
- */
- if (same_file(&istat, &ostat)) {
- if (strequ(ifname, ofname)) {
- fprintf(stderr, "%s: %s: cannot %scompress onto itself\n",
- progname, ifname, decompress ? "de" : "");
- } else {
- fprintf(stderr, "%s: %s and %s are the same file\n",
- progname, ifname, ofname);
- }
- exit_code = ERROR;
- return ERROR;
- }
/* Ask permission to overwrite the existing file */
if (!force) {
int ok = 0;
- fprintf(stderr, "%s: %s already exists;", progname, ofname);
+ fprintf (stderr, "%s: %s already exists;", program_name, ofname);
if (foreground && isatty(fileno(stdin))) {
fprintf(stderr, " do you wish to overwrite (y or n)? ");
fflush(stderr);
}
-#ifndef NO_UTIME
-/* ========================================================================
- * Set the access and modification times from the given stat buffer.
- */
-local void reset_times (name, statb)
- char *name;
- struct stat *statb;
-{
- struct utimbuf timep;
-
- /* Copy the time stamp */
- timep.actime = statb->st_atime;
- timep.modtime = statb->st_mtime;
-
- /* Some systems (at least OS/2) do not support utime on directories */
- if (utime(name, &timep) && !S_ISDIR(statb->st_mode)) {
- int e = errno;
- WARN((stderr, "%s: ", progname));
- if (!quiet) {
- errno = e;
- perror(ofname);
- }
- }
-}
-#endif
-
-
/* ========================================================================
* Copy modes, times, ownership from input file to output file.
* IN assertion: to_stdout is false.
local void copy_stat(ifstat)
struct stat *ifstat;
{
+ mode_t mode = ifstat->st_mode & S_IRWXUGO;
+ int r;
+
#ifndef NO_UTIME
- if (decompress && time_stamp != 0 && ifstat->st_mtime != time_stamp) {
- ifstat->st_mtime = time_stamp;
+ struct timespec timespec[2];
+ timespec[0] = get_stat_atime (ifstat);
+ timespec[1] = get_stat_mtime (ifstat);
+
+ if (decompress && 0 <= time_stamp.tv_nsec
+ && ! (timespec[1].tv_sec == time_stamp.tv_sec
+ && timespec[1].tv_nsec == time_stamp.tv_nsec))
+ {
+ timespec[1] = time_stamp;
if (verbose > 1) {
fprintf(stderr, "%s: time stamp restored\n", ofname);
}
- }
- reset_times(ofname, ifstat);
+ }
+
+ if (futimens (ofd, ofname, timespec) != 0)
+ {
+ int e = errno;
+ WARN ((stderr, "%s: ", program_name));
+ if (!quiet)
+ {
+ errno = e;
+ perror (ofname);
+ }
+ }
+#endif
+
+#ifndef NO_CHOWN
+# if HAVE_FCHOWN
+ fchown (ofd, ifstat->st_uid, ifstat->st_gid); /* Copy ownership */
+# elif HAVE_CHOWN
+ chown(ofname, ifstat->st_uid, ifstat->st_gid); /* Copy ownership */
+# endif
#endif
+
/* Copy the protection modes */
- if (fchmod(ofd, ifstat->st_mode & 07777)) {
+#if HAVE_FCHMOD
+ r = fchmod (ofd, mode);
+#else
+ r = chmod (ofname, mode);
+#endif
+ if (r != 0) {
int e = errno;
- WARN((stderr, "%s: ", progname));
+ WARN ((stderr, "%s: ", program_name));
if (!quiet) {
errno = e;
perror(ofname);
}
}
-#ifndef NO_CHOWN
- fchown(ofd, ifstat->st_uid, ifstat->st_gid); /* Copy ownership */
-#endif
}
#if ! NO_DIR
/* ========================================================================
* Recurse through the given directory. This code is taken from ncompress.
*/
-local void treat_dir(dir)
+local void treat_dir (fd, dir)
+ int fd;
char *dir;
{
struct dirent *dp;
char nbuf[MAX_PATH_LEN];
int len;
+#if HAVE_FDOPENDIR
+ dirp = fdopendir (fd);
+#else
+ close (fd);
dirp = opendir(dir);
-
+#endif
+
if (dirp == NULL) {
progerror(dir);
+#if HAVE_FDOPENDIR
+ close (fd);
+#endif
return ;
}
/*
** think it's worth it. -- Dave Mack
** (An other alternative might be two passes to avoid depth-first.)
*/
-
+
while ((errno = 0, dp = readdir(dirp)) != NULL) {
if (strequ(dp->d_name,".") || strequ(dp->d_name,"..")) {
continue;
}
len = strlen(dir);
- if (len + NAMLEN(dp) + 1 < MAX_PATH_LEN - 1) {
+ if (len + _D_EXACT_NAMLEN (dp) + 1 < MAX_PATH_LEN - 1) {
strcpy(nbuf,dir);
if (len != 0 /* dir = "" means current dir on Amiga */
#ifdef PATH_SEP2
treat_file(nbuf);
} else {
fprintf(stderr,"%s: %s/%s: pathname too long\n",
- progname, dir, dp->d_name);
+ program_name, dir, dp->d_name);
exit_code = ERROR;
}
}
}
#endif /* ! NO_DIR */
+/* Make sure signals get handled properly. */
+
+static void
+install_signal_handlers ()
+{
+ static int sig[] =
+ {
+ /* SIGINT must be first, as 'foreground' depends on it. */
+ SIGINT
+
+#ifdef SIGHUP
+ , SIGHUP
+#endif
+#ifdef SIGPIPE
+ , SIGPIPE
+#else
+# define SIGPIPE 0
+#endif
+#ifdef SIGTERM
+ , SIGTERM
+#endif
+#ifdef SIGXCPU
+ , SIGXCPU
+#endif
+#ifdef SIGXFSZ
+ , SIGXFSZ
+#endif
+ };
+ int nsigs = sizeof sig / sizeof sig[0];
+ int i;
+
+#if SA_NOCLDSTOP
+ struct sigaction act;
+
+ sigemptyset (&caught_signals);
+ for (i = 0; i < nsigs; i++)
+ {
+ sigaction (sig[i], NULL, &act);
+ if (act.sa_handler != SIG_IGN)
+ sigaddset (&caught_signals, sig[i]);
+ }
+
+ act.sa_handler = abort_gzip_signal;
+ act.sa_mask = caught_signals;
+ act.sa_flags = 0;
+
+ for (i = 0; i < nsigs; i++)
+ if (sigismember (&caught_signals, sig[i]))
+ {
+ if (i == 0)
+ foreground = 1;
+ sigaction (sig[i], &act, NULL);
+ }
+#else
+ for (i = 0; i < nsigs; i++)
+ if (signal (sig[i], SIG_IGN) != SIG_IGN)
+ {
+ if (i == 0)
+ foreground = 1;
+ signal (sig[i], abort_gzip_signal);
+ siginterrupt (sig[i], 1);
+ }
+#endif
+}
+
/* ========================================================================
* Free all dynamically allocated variables and exit with the given code.
*/
}
/* ========================================================================
- * Close and unlink the output file if appropriate. This routine must be
- * async-signal-safe.
+ * Close and unlink the output file.
*/
-local void do_remove() {
- if (remove_ofname) {
- close(ofd);
- xunlink (ofname);
- }
+static void
+remove_output_file ()
+{
+ int fd;
+ sigset_t oldset;
+
+ sigprocmask (SIG_BLOCK, &caught_signals, &oldset);
+ fd = remove_ofname_fd;
+ if (0 <= fd)
+ {
+ remove_ofname_fd = -1;
+ close (fd);
+ xunlink (ofname);
+ }
+ sigprocmask (SIG_SETMASK, &oldset, NULL);
}
/* ========================================================================
* Error handler.
*/
-RETSIGTYPE abort_gzip()
+void
+abort_gzip ()
{
- do_remove();
- do_exit(ERROR);
+ remove_output_file ();
+ do_exit(ERROR);
}
/* ========================================================================
* Signal handler.
*/
-RETSIGTYPE abort_gzip_signal()
+static RETSIGTYPE
+abort_gzip_signal (sig)
+ int sig;
{
- do_remove();
- _exit(ERROR);
+ if (! SA_NOCLDSTOP)
+ signal (sig, SIG_IGN);
+ remove_output_file ();
+ if (sig == exiting_signal)
+ _exit (ERROR);
+ signal (sig, SIG_DFL);
+ raise (sig);
}
-
-
-User Commands GZIP(1)
+GZIP(1) GZIP(1)
NAME
- gzip, gunzip, zcat - compress or expand files
+ gzip, gunzip, zcat - compress or expand files
SYNOPSIS
- gzip [ -acdfhlLnNrtvV19 ] [-S suffix] [ name ... ]
- gunzip [ -acfhlLnNrtvV ] [-S suffix] [ name ... ]
- zcat [ -fhLV ] [ name ... ]
+ gzip [ -acdfhlLnNrtvV19 ] [-S suffix] [ name ... ]
+ gunzip [ -acfhlLnNrtvV ] [-S suffix] [ name ... ]
+ zcat [ -fhLV ] [ name ... ]
DESCRIPTION
- Gzip reduces the size of the named files using Lempel-Ziv
- coding (LZ77). Whenever possible, each file is replaced by
- one with the extension .gz, while keeping the same ownership
- modes, access and modification times. (The default exten-
- sion is -gz for VMS, z for MSDOS, OS/2 FAT, Windows NT FAT
- and Atari.) If no files are specified, or if a file name is
- "-", the standard input is compressed to the standard out-
- put. Gzip will only attempt to compress regular files. In
- particular, it will ignore symbolic links.
-
- If the compressed file name is too long for its file system,
- gzip truncates it. Gzip attempts to truncate only the parts
- of the file name longer than 3 characters. (A part is
- delimited by dots.) If the name consists of small parts
- only, the longest parts are truncated. For example, if file
- names are limited to 14 characters, gzip.msdos.exe is com-
- pressed to gzi.msd.exe.gz. Names are not truncated on sys-
- tems which do not have a limit on file name length.
-
- By default, gzip keeps the original file name and timestamp
- in the compressed file. These are used when decompressing
- the file with the -N option. This is useful when the com-
- pressed file name was truncated or when the time stamp was
- not preserved after a file transfer.
-
- Compressed files can be restored to their original form
- using gzip -d or gunzip or zcat. If the original name saved
- in the compressed file is not suitable for its file system,
- a new name is constructed from the original one to make it
- legal.
-
- gunzip takes a list of files on its command line and
- replaces each file whose name ends with .gz, -gz, .z, -z, _z
- or .Z and which begins with the correct magic number with an
- uncompressed file without the original extension. gunzip
- also recognizes the special extensions .tgz and .taz as
- shorthands for .tar.gz and .tar.Z respectively. When com-
- pressing, gzip uses the .tgz extension if necessary instead
- of truncating a file with a .tar extension.
-
- gunzip can currently decompress files created by gzip, zip,
- compress, compress -H or pack. The detection of the input
- format is automatic. When using the first two formats,
-
-SunOS 5.8 Last change: local 1
-
-User Commands GZIP(1)
-
- gunzip checks a 32 bit CRC. For pack, gunzip checks the
- uncompressed length. The standard compress format was not
- designed to allow consistency checks. However gunzip is
- sometimes able to detect a bad .Z file. If you get an error
- when uncompressing a .Z file, do not assume that the .Z file
- is correct simply because the standard uncompress does not
- complain. This generally means that the standard uncompress
- does not check its input, and happily generates garbage out-
- put. The SCO compress -H format (lzh compression method)
- does not include a CRC but also allows some consistency
- checks.
-
- Files created by zip can be uncompressed by gzip only if
- they have a single member compressed with the 'deflation'
- method. This feature is only intended to help conversion of
- tar.zip files to the tar.gz format. To extract a zip file
- with a single member, use a command like gunzip <foo.zip or
- gunzip -S .zip foo.zip. To extract zip files with several
- members, use unzip instead of gunzip.
-
- zcat is identical to gunzip -c. (On some systems, zcat may
- be installed as gzcat to preserve the original link to com-
- press.) zcat uncompresses either a list of files on the
- command line or its standard input and writes the uncom-
- pressed data on standard output. zcat will uncompress files
- that have the correct magic number whether they have a .gz
- suffix or not.
-
- Gzip uses the Lempel-Ziv algorithm used in zip and PKZIP.
- The amount of compression obtained depends on the size of
- the input and the distribution of common substrings. Typi-
- cally, text such as source code or English is reduced by
- 60-70%. Compression is generally much better than that
- achieved by LZW (as used in compress), Huffman coding (as
- used in pack), or adaptive Huffman coding (compact).
-
- Compression is always performed, even if the compressed file
- is slightly larger than the original. The worst case expan-
- sion is a few bytes for the gzip file header, plus 5 bytes
- every 32K block, or an expansion ratio of 0.015% for large
- files. Note that the actual number of used disk blocks
- almost never increases. gzip preserves the mode, ownership
- and timestamps of files when compressing or decompressing.
-
- The gzip file format is specified in P. Deutsch, GZIP file
- format specification version 4.3, <ftp://ftp.isi.edu/in-
- notes/rfc1952.txt>, Internet RFC 1952 (May 1996). The zip
- deflation format is specified in P. Deutsch, DEFLATE Com-
- pressed Data Format Specification version 1.3,
- <ftp://ftp.isi.edu/in-notes/rfc1951.txt>, Internet RFC 1951
- (May 1996).
-
-SunOS 5.8 Last change: local 2
-
-User Commands GZIP(1)
+ Gzip reduces the size of the named files using Lempel-Ziv coding
+ (LZ77). Whenever possible, each file is replaced by one with the
+ extension .gz, while keeping the same ownership modes, access and modi-
+ fication times. (The default extension is -gz for VMS, z for MSDOS,
+ OS/2 FAT, Windows NT FAT and Atari.) If no files are specified, or if
+ a file name is "-", the standard input is compressed to the standard
+ output. Gzip will only attempt to compress regular files. In particu-
+ lar, it will ignore symbolic links.
+
+ If the compressed file name is too long for its file system, gzip trun-
+ cates it. Gzip attempts to truncate only the parts of the file name
+ longer than 3 characters. (A part is delimited by dots.) If the name
+ consists of small parts only, the longest parts are truncated. For
+ example, if file names are limited to 14 characters, gzip.msdos.exe is
+ compressed to gzi.msd.exe.gz. Names are not truncated on systems which
+ do not have a limit on file name length.
+
+ By default, gzip keeps the original file name and timestamp in the com-
+ pressed file. These are used when decompressing the file with the -N
+ option. This is useful when the compressed file name was truncated or
+ when the time stamp was not preserved after a file transfer.
+
+ Compressed files can be restored to their original form using gzip -d
+ or gunzip or zcat. If the original name saved in the compressed file
+ is not suitable for its file system, a new name is constructed from the
+ original one to make it legal.
+
+ gunzip takes a list of files on its command line and replaces each file
+ whose name ends with .gz, -gz, .z, -z, _z or .Z and which begins with
+ the correct magic number with an uncompressed file without the original
+ extension. gunzip also recognizes the special extensions .tgz and .taz
+ as shorthands for .tar.gz and .tar.Z respectively. When compressing,
+ gzip uses the .tgz extension if necessary instead of truncating a file
+ with a .tar extension.
+
+ gunzip can currently decompress files created by gzip, zip, compress,
+ compress -H or pack. The detection of the input format is automatic.
+ When using the first two formats, gunzip checks a 32 bit CRC. For pack,
+ gunzip checks the uncompressed length. The standard compress format was
+ not designed to allow consistency checks. However gunzip is sometimes
+ able to detect a bad .Z file. If you get an error when uncompressing a
+ .Z file, do not assume that the .Z file is correct simply because the
+ standard uncompress does not complain. This generally means that the
+ standard uncompress does not check its input, and happily generates
+ garbage output. The SCO compress -H format (lzh compression method)
+ does not include a CRC but also allows some consistency checks.
+
+ Files created by zip can be uncompressed by gzip only if they have a
+ single member compressed with the 'deflation' method. This feature is
+ only intended to help conversion of tar.zip files to the tar.gz format.
+ To extract a zip file with a single member, use a command like gunzip
+ <foo.zip or gunzip -S .zip foo.zip. To extract zip files with several
+ members, use unzip instead of gunzip.
+
+ zcat is identical to gunzip -c. (On some systems, zcat may be
+ installed as gzcat to preserve the original link to compress.) zcat
+ uncompresses either a list of files on the command line or its standard
+ input and writes the uncompressed data on standard output. zcat will
+ uncompress files that have the correct magic number whether they have a
+ .gz suffix or not.
+
+ Gzip uses the Lempel-Ziv algorithm used in zip and PKZIP. The amount
+ of compression obtained depends on the size of the input and the dis-
+ tribution of common substrings. Typically, text such as source code or
+ English is reduced by 60-70%. Compression is generally much better
+ than that achieved by LZW (as used in compress), Huffman coding (as
+ used in pack), or adaptive Huffman coding (compact).
+
+ Compression is always performed, even if the compressed file is
+ slightly larger than the original. The worst case expansion is a few
+ bytes for the gzip file header, plus 5 bytes every 32K block, or an
+ expansion ratio of 0.015% for large files. Note that the actual number
+ of used disk blocks almost never increases. gzip preserves the mode,
+ ownership and timestamps of files when compressing or decompressing.
+
+ The gzip file format is specified in P. Deutsch, GZIP file format spec-
+ ification version 4.3, <ftp://ftp.isi.edu/in-notes/rfc1952.txt>, Inter-
+ net RFC 1952 (May 1996). The zip deflation format is specified in P.
+ Deutsch, DEFLATE Compressed Data Format Specification version 1.3,
+ <ftp://ftp.isi.edu/in-notes/rfc1951.txt>, Internet RFC 1951 (May 1996).
OPTIONS
- -a --ascii
- Ascii text mode: convert end-of-lines using local con-
- ventions. This option is supported only on some non-
- Unix systems. For MSDOS, CR LF is converted to LF when
- compressing, and LF is converted to CR LF when decom-
- pressing.
-
- -c --stdout --to-stdout
- Write output on standard output; keep original files
- unchanged. If there are several input files, the out-
- put consists of a sequence of independently compressed
- members. To obtain better compression, concatenate all
- input files before compressing them.
-
- -d --decompress --uncompress
- Decompress.
-
- -f --force
- Force compression or decompression even if the file has
- multiple links or the corresponding file already
- exists, or if the compressed data is read from or writ-
- ten to a terminal. If the input data is not in a format
- recognized by gzip, and if the option --stdout is also
- given, copy the input data without change to the stan-
- dard ouput: let zcat behave as cat. If -f is not
- given, and when not running in the background, gzip
- prompts to verify whether an existing file should be
- overwritten.
-
- -h --help
- Display a help screen and quit.
-
- -l --list
- For each compressed file, list the following fields:
-
- compressed size: size of the compressed file
- uncompressed size: size of the uncompressed file
- ratio: compression ratio (0.0% if unknown)
- uncompressed_name: name of the uncompressed file
-
- The uncompressed size is given as -1 for files not in
- gzip format, such as compressed .Z files. To get the
- uncompressed size for such a file, you can use:
-
- zcat file.Z | wc -c
-
- In combination with the --verbose option, the following
- fields are also displayed:
-
- method: compression method
- crc: the 32-bit CRC of the uncompressed data
-
-SunOS 5.8 Last change: local 3
-
-User Commands GZIP(1)
-
- date & time: time stamp for the uncompressed file
-
- The compression methods currently supported are
- deflate, compress, lzh (SCO compress -H) and pack. The
- crc is given as ffffffff for a file not in gzip format.
-
- With --name, the uncompressed name, date and time are
- those stored within the compress file if present.
-
- With --verbose, the size totals and compression ratio
- for all files is also displayed, unless some sizes are
- unknown. With --quiet, the title and totals lines are
- not displayed.
-
- -L --license
- Display the gzip license and quit.
-
- -n --no-name
- When compressing, do not save the original file name
- and time stamp by default. (The original name is always
- saved if the name had to be truncated.) When decom-
- pressing, do not restore the original file name if pre-
- sent (remove only the gzip suffix from the compressed
- file name) and do not restore the original time stamp
- if present (copy it from the compressed file). This
- option is the default when decompressing.
-
- -N --name
- When compressing, always save the original file name
- and time stamp; this is the default. When decompress-
- ing, restore the original file name and time stamp if
- present. This option is useful on systems which have a
- limit on file name length or when the time stamp has
- been lost after a file transfer.
-
- -q --quiet
- Suppress all warnings.
-
- -r --recursive
- Travel the directory structure recursively. If any of
- the file names specified on the command line are direc-
- tories, gzip will descend into the directory and com-
- press all the files it finds there (or decompress them
- in the case of gunzip ).
-
- -S .suf --suffix .suf
- Use suffix .suf instead of .gz. Any suffix can be
- given, but suffixes other than .z and .gz should be
- avoided to avoid confusion when files are transferred
- to other systems. A null suffix forces gunzip to try
- decompression on all given files regardless of suffix,
- as in:
-
-SunOS 5.8 Last change: local 4
-
-User Commands GZIP(1)
-
- gunzip -S "" * (*.* for MSDOS)
-
- Previous versions of gzip used the .z suffix. This was
- changed to avoid a conflict with pack(1).
-
- -t --test
- Test. Check the compressed file integrity.
-
- -v --verbose
- Verbose. Display the name and percentage reduction for
- each file compressed or decompressed.
-
- -V --version
- Version. Display the version number and compilation
- options then quit.
-
- -# --fast --best
- Regulate the speed of compression using the specified
- digit #, where -1 or --fast indicates the fastest com-
- pression method (less compression) and -9 or --best
- indicates the slowest compression method (best compres-
- sion). The default compression level is -6 (that is,
- biased towards high compression at expense of speed).
+ -a --ascii
+ Ascii text mode: convert end-of-lines using local conventions.
+ This option is supported only on some non-Unix systems. For
+ MSDOS, CR LF is converted to LF when compressing, and LF is con-
+ verted to CR LF when decompressing.
+
+ -c --stdout --to-stdout
+ Write output on standard output; keep original files unchanged.
+ If there are several input files, the output consists of a
+ sequence of independently compressed members. To obtain better
+ compression, concatenate all input files before compressing
+ them.
+
+ -d --decompress --uncompress
+ Decompress.
+
+ -f --force
+ Force compression or decompression even if the file has multiple
+ links or the corresponding file already exists, or if the com-
+ pressed data is read from or written to a terminal. If the input
+ data is not in a format recognized by gzip, and if the option
+ --stdout is also given, copy the input data without change to
+ the standard output: let zcat behave as cat. If -f is not
+ given, and when not running in the background, gzip prompts to
+ verify whether an existing file should be overwritten.
+
+ -h --help
+ Display a help screen and quit.
+
+ -l --list
+ For each compressed file, list the following fields:
+
+ compressed size: size of the compressed file
+ uncompressed size: size of the uncompressed file
+ ratio: compression ratio (0.0% if unknown)
+ uncompressed_name: name of the uncompressed file
+
+ The uncompressed size is given as -1 for files not in gzip for-
+ mat, such as compressed .Z files. To get the uncompressed size
+ for such a file, you can use:
+
+ zcat file.Z | wc -c
+
+ In combination with the --verbose option, the following fields
+ are also displayed:
+
+ method: compression method
+ crc: the 32-bit CRC of the uncompressed data
+ date & time: time stamp for the uncompressed file
+
+ The compression methods currently supported are deflate, com-
+ press, lzh (SCO compress -H) and pack. The crc is given as
+ ffffffff for a file not in gzip format.
+
+ With --name, the uncompressed name, date and time are those
+ stored within the compress file if present.
+
+ With --verbose, the size totals and compression ratio for all
+ files is also displayed, unless some sizes are unknown. With
+ --quiet, the title and totals lines are not displayed.
+
+ -L --license
+ Display the gzip license and quit.
+
+ -n --no-name
+ When compressing, do not save the original file name and time
+ stamp by default. (The original name is always saved if the name
+ had to be truncated.) When decompressing, do not restore the
+ original file name if present (remove only the gzip suffix from
+ the compressed file name) and do not restore the original time
+ stamp if present (copy it from the compressed file). This option
+ is the default when decompressing.
+
+ -N --name
+ When compressing, always save the original file name and time
+ stamp; this is the default. When decompressing, restore the
+ original file name and time stamp if present. This option is
+ useful on systems which have a limit on file name length or when
+ the time stamp has been lost after a file transfer.
+
+ -q --quiet
+ Suppress all warnings.
+
+ -r --recursive
+ Travel the directory structure recursively. If any of the file
+ names specified on the command line are directories, gzip will
+ descend into the directory and compress all the files it finds
+ there (or decompress them in the case of gunzip ).
+
+ -S .suf --suffix .suf
+ Use suffix .suf instead of .gz. Any suffix can be given, but
+ suffixes other than .z and .gz should be avoided to avoid confu-
+ sion when files are transferred to other systems. A null suffix
+ forces gunzip to try decompression on all given files regard-
+ less of suffix, as in:
+
+ gunzip -S "" * (*.* for MSDOS)
+
+ Previous versions of gzip used the .z suffix. This was changed
+ to avoid a conflict with pack(1).
+
+ -t --test
+ Test. Check the compressed file integrity.
+
+ -v --verbose
+ Verbose. Display the name and percentage reduction for each file
+ compressed or decompressed.
+
+ -V --version
+ Version. Display the version number and compilation options then
+ quit.
+
+ -# --fast --best
+ Regulate the speed of compression using the specified digit #,
+ where -1 or --fast indicates the fastest compression method
+ (less compression) and -9 or --best indicates the slowest com-
+ pression method (best compression). The default compression
+ level is -6 (that is, biased towards high compression at expense
+ of speed).
ADVANCED USAGE
- Multiple compressed files can be concatenated. In this case,
- gunzip will extract all members at once. For example:
-
- gzip -c file1 > foo.gz
- gzip -c file2 >> foo.gz
-
- Then
+ Multiple compressed files can be concatenated. In this case, gunzip
+ will extract all members at once. For example:
- gunzip -c foo
+ gzip -c file1 > foo.gz
+ gzip -c file2 >> foo.gz
- is equivalent to
+ Then
- cat file1 file2
+ gunzip -c foo
- In case of damage to one member of a .gz file, other members
- can still be recovered (if the damaged member is removed).
- However, you can get better compression by compressing all
- members at once:
+ is equivalent to
- cat file1 file2 | gzip > foo.gz
+ cat file1 file2
- compresses better than
+ In case of damage to one member of a .gz file, other members can still
+ be recovered (if the damaged member is removed). However, you can get
+ better compression by compressing all members at once:
- gzip -c file1 file2 > foo.gz
+ cat file1 file2 | gzip > foo.gz
- If you want to recompress concatenated files to get better
- compression, do:
+ compresses better than
-SunOS 5.8 Last change: local 5
+ gzip -c file1 file2 > foo.gz
-User Commands GZIP(1)
+ If you want to recompress concatenated files to get better compression,
+ do:
- gzip -cd old.gz | gzip > new.gz
+ gzip -cd old.gz | gzip > new.gz
- If a compressed file consists of several members, the uncom-
- pressed size and CRC reported by the --list option applies
- to the last member only. If you need the uncompressed size
- for all members, you can use:
+ If a compressed file consists of several members, the uncompressed size
+ and CRC reported by the --list option applies to the last member only.
+ If you need the uncompressed size for all members, you can use:
- gzip -cd file.gz | wc -c
+ gzip -cd file.gz | wc -c
- If you wish to create a single archive file with multiple
- members so that members can later be extracted indepen-
- dently, use an archiver such as tar or zip. GNU tar supports
- the -z option to invoke gzip transparently. gzip is designed
- as a complement to tar, not as a replacement.
+ If you wish to create a single archive file with multiple members so
+ that members can later be extracted independently, use an archiver such
+ as tar or zip. GNU tar supports the -z option to invoke gzip transpar-
+ ently. gzip is designed as a complement to tar, not as a replacement.
ENVIRONMENT
- The environment variable GZIP can hold a set of default
- options for gzip. These options are interpreted first and
- can be overwritten by explicit command line parameters. For
- example:
- for sh: GZIP="-8v --name"; export GZIP
- for csh: setenv GZIP "-8v --name"
- for MSDOS: set GZIP=-8v --name
-
- On Vax/VMS, the name of the environment variable is
- GZIP_OPT, to avoid a conflict with the symbol set for invo-
- cation of the program.
+ The environment variable GZIP can hold a set of default options for
+ gzip. These options are interpreted first and can be overwritten by
+ explicit command line parameters. For example:
+ for sh: GZIP="-8v --name"; export GZIP
+ for csh: setenv GZIP "-8v --name"
+ for MSDOS: set GZIP=-8v --name
+
+ On Vax/VMS, the name of the environment variable is GZIP_OPT, to avoid
+ a conflict with the symbol set for invocation of the program.
SEE ALSO
- znew(1), zcmp(1), zmore(1), zforce(1), gzexe(1), zip(1),
- unzip(1), compress(1), pack(1), compact(1)
+ znew(1), zcmp(1), zmore(1), zforce(1), gzexe(1), zip(1), unzip(1), com-
+ press(1), pack(1), compact(1)
- The gzip file format is specified in P. Deutsch, GZIP file
- format specification version 4.3, <ftp://ftp.isi.edu/in-
- notes/rfc1952.txt>, Internet RFC 1952 (May 1996). The zip
- deflation format is specified in P. Deutsch, DEFLATE Com-
- pressed Data Format Specification version 1.3,
- <ftp://ftp.isi.edu/in-notes/rfc1951.txt>, Internet RFC 1951
- (May 1996).
+ The gzip file format is specified in P. Deutsch, GZIP file format spec-
+ ification version 4.3, <ftp://ftp.isi.edu/in-notes/rfc1952.txt>, Inter-
+ net RFC 1952 (May 1996). The zip deflation format is specified in P.
+ Deutsch, DEFLATE Compressed Data Format Specification version 1.3,
+ <ftp://ftp.isi.edu/in-notes/rfc1951.txt>, Internet RFC 1951 (May 1996).
DIAGNOSTICS
- Exit status is normally 0; if an error occurs, exit status
- is 1. If a warning occurs, exit status is 2.
-
- Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
- Invalid options were specified on the command line.
-
- file: not in gzip format
- The file specified to gunzip has not been compressed.
+ Exit status is normally 0; if an error occurs, exit status is 1. If a
+ warning occurs, exit status is 2.
- file: Corrupt input. Use zcat to recover some data.
- The compressed file has been damaged. The data up to
+ Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
+ Invalid options were specified on the command line.
-SunOS 5.8 Last change: local 6
+ file: not in gzip format
+ The file specified to gunzip has not been compressed.
-User Commands GZIP(1)
+ file: Corrupt input. Use zcat to recover some data.
+ The compressed file has been damaged. The data up to the point
+ of failure can be recovered using
- the point of failure can be recovered using
+ zcat file > recover
- zcat file > recover
+ file: compressed with xx bits, can only handle yy bits
+ File was compressed (using LZW) by a program that could deal
+ with more bits than the decompress code on this machine. Recom-
+ press the file with gzip, which compresses better and uses less
+ memory.
- file: compressed with xx bits, can only handle yy bits
- File was compressed (using LZW) by a program that could
- deal with more bits than the decompress code on this
- machine. Recompress the file with gzip, which com-
- presses better and uses less memory.
+ file: already has .gz suffix -- no change
+ The file is assumed to be already compressed. Rename the file
+ and try again.
- file: already has .gz suffix -- no change
- The file is assumed to be already compressed. Rename
- the file and try again.
+ file already exists; do you wish to overwrite (y or n)?
+ Respond "y" if you want the output file to be replaced; "n" if
+ not.
- file already exists; do you wish to overwrite (y or n)?
- Respond "y" if you want the output file to be replaced;
- "n" if not.
+ gunzip: corrupt input
+ A SIGSEGV violation was detected which usually means that the
+ input file has been corrupted.
- gunzip: corrupt input
- A SIGSEGV violation was detected which usually means
- that the input file has been corrupted.
+ xx.x% Percentage of the input saved by compression.
+ (Relevant only for -v and -l.)
- xx.x% Percentage of the input saved by compression.
- (Relevant only for -v and -l.)
+ -- not a regular file or directory: ignored
+ When the input file is not a regular file or directory, (e.g. a
+ symbolic link, socket, FIFO, device file), it is left unaltered.
- -- not a regular file or directory: ignored
- When the input file is not a regular file or directory,
- (e.g. a symbolic link, socket, FIFO, device file), it
- is left unaltered.
-
- -- has xx other links: unchanged
- The input file has links; it is left unchanged. See
- ln(1) for more information. Use the -f flag to force
- compression of multiply-linked files.
+ -- has xx other links: unchanged
+ The input file has links; it is left unchanged. See ln(1) for
+ more information. Use the -f flag to force compression of multi-
+ ply-linked files.
CAVEATS
- When writing compressed data to a tape, it is generally nec-
- essary to pad the output with zeroes up to a block boundary.
- When the data is read and the whole block is passed to gun-
- zip for decompression, gunzip detects that there is extra
- trailing garbage after the compressed data and emits a warn-
- ing by default. You have to use the --quiet option to sup-
- press the warning. This option can be set in the GZIP envi-
- ronment variable as in:
- for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
- for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
-
- In the above example, gzip is invoked implicitly by the -z
- option of GNU tar. Make sure that the same block size (-b
- option of tar) is used for reading and writing compressed
- data on tapes. (This example assumes you are using the GNU
- version of tar.)
-
-SunOS 5.8 Last change: local 7
-
-User Commands GZIP(1)
+ When writing compressed data to a tape, it is generally necessary to
+ pad the output with zeroes up to a block boundary. When the data is
+ read and the whole block is passed to gunzip for decompression, gunzip
+ detects that there is extra trailing garbage after the compressed data
+ and emits a warning by default. You have to use the --quiet option to
+ suppress the warning. This option can be set in the GZIP environment
+ variable as in:
+ for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
+ for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
+
+ In the above example, gzip is invoked implicitly by the -z option of
+ GNU tar. Make sure that the same block size (-b option of tar) is used
+ for reading and writing compressed data on tapes. (This example
+ assumes you are using the GNU version of tar.)
BUGS
- The gzip format represents the the input size modulo 2^32,
- so the --list option reports incorrect uncompressed sizes
- and compression ratios for uncompressed files 4 GB and
- larger. To work around this problem, you can use the fol-
- lowing command to discover a large uncompressed file's true
- size:
+ The gzip format represents the input size modulo 2^32, so the --list
+ option reports incorrect uncompressed sizes and compression ratios for
+ uncompressed files 4 GB and larger. To work around this problem, you
+ can use the following command to discover a large uncompressed file's
+ true size:
- zcat file.gz | wc -c
+ zcat file.gz | wc -c
- The --list option reports sizes as -1 and crc as ffffffff if
- the compressed file is on a non seekable media.
+ The --list option reports sizes as -1 and crc as ffffffff if the com-
+ pressed file is on a non seekable media.
- In some rare cases, the --best option gives worse compres-
- sion than the default compression level (-6). On some highly
- redundant files, compress compresses better than gzip.
+ In some rare cases, the --best option gives worse compression than the
+ default compression level (-6). On some highly redundant files, com-
+ press compresses better than gzip.
COPYRIGHT NOTICE
- Copyright (C) 1998, 1999, 2001, 2002 Free Software Founda-
- tion, Inc.
- Copyright (C) 1992, 1993 Jean-loup Gailly
-
- Permission is granted to make and distribute verbatim copies
- of this manual provided the copyright notice and this per-
- mission notice are preserved on all copies.
+ Copyright (C) 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 1992, 1993 Jean-loup Gailly
- Permission is granted to copy and distribute modified ver-
- sions of this manual under the conditions for verbatim copy-
- ing, provided that the entire resulting derived work is dis-
- tributed under the terms of a permission notice identical to
- this one.
+ Permission is granted to make and distribute verbatim copies of this
+ manual provided the copyright notice and this permission notice are
+ preserved on all copies.
- Permission is granted to copy and distribute translations of
- this manual into another language, under the above condi-
- tions for modified versions, except that this permission
- notice may be stated in a translation approved by the Foun-
- dation.
+ Permission is granted to copy and distribute modified versions of this
+ manual under the conditions for verbatim copying, provided that the
+ entire resulting derived work is distributed under the terms of a per-
+ mission notice identical to this one.
-SunOS 5.8 Last change: local 8
+ Permission is granted to copy and distribute translations of this man-
+ ual into another language, under the above conditions for modified ver-
+ sions, except that this permission notice may be stated in a transla-
+ tion approved by the Foundation.
+ local GZIP(1)
/* gzip.h -- common declarations for all gzip modules
- * Copyright (C) 1997, 1998, 1999, 2001 Free Software Foundation, Inc.
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1997, 1998, 1999, 2001, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
#if defined(__STDC__) || defined(PROTO)
# define OF(args) args
typedef char *voidp;
#endif
+#ifndef __attribute__
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
+# define __attribute__(x)
+# endif
+#endif
+
+#ifndef ATTRIBUTE_NORETURN
+# define ATTRIBUTE_NORETURN __attribute__ ((__noreturn__))
+#endif
+
/* I don't like nested includes, but the following headers are used
* too often
*/
# define memzero(s, n) memset ((voidp)(s), 0, (n))
#else
# include <strings.h>
-# define strchr index
+# define strchr index
# define strrchr rindex
-# define memcpy(d, s, n) bcopy((s), (d), (n))
-# define memcmp(s1, s2, n) bcmp((s1), (s2), (n))
+# define memcpy(d, s, n) bcopy((s), (d), (n))
+# define memcmp(s1, s2, n) bcmp((s1), (s2), (n))
# define memzero(s, n) bzero((s), (n))
#endif
# define DECLARE(type, array, size) type * near array
# define ALLOC(type, array, size) { \
array = (type*)fcalloc((size_t)(((size)+1L)/2), 2*sizeof(type)); \
- if (array == NULL) error("insufficient memory"); \
+ if (!array) xalloc_die (); \
}
# define FREE(array) {if (array != NULL) fcfree(array), array=NULL;}
#else
extern int ofd; /* output file descriptor */
extern char ifname[]; /* input file name or "stdin" */
extern char ofname[]; /* output file name or "stdout" */
-extern char *progname; /* program name */
+extern char *program_name; /* program name */
-extern time_t time_stamp; /* original time stamp (modification time) */
+extern struct timespec time_stamp; /* original time stamp (modification time) */
extern off_t ifile_size; /* input file size, -1 for devices (debug only) */
typedef int file_t; /* Do not use stdio */
/* Diagnostic functions */
#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Assert(cond,msg) {if (!(cond)) gzip_error (msg);}
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
extern int unlzh OF((int in, int out));
/* in gzip.c */
-RETSIGTYPE abort_gzip_signal OF((void));
+void abort_gzip OF((void)) ATTRIBUTE_NORETURN;
/* in deflate.c */
void lm_init OF((int pack_level, ush *flags));
extern void flush_outbuf OF((void));
extern void flush_window OF((void));
extern void write_buf OF((int fd, voidp buf, unsigned cnt));
+extern int read_buffer OF((int fd, voidp buf, unsigned int cnt));
extern char *strlwr OF((char *s));
-extern char *base_name OF((char *fname));
+extern char *gzip_base_name OF((char *fname));
extern int xunlink OF((char *fname));
extern void make_simple_name OF((char *name));
extern char *add_envopt OF((int *argcp, char ***argvp, char *env));
-extern void error OF((char *m));
+extern void gzip_error OF((char *m));
+extern void xalloc_die OF((void)) ATTRIBUTE_NORETURN;
extern void warning OF((char *m));
extern void read_error OF((void));
extern void write_error OF((void));
extern void display_ratio OF((off_t num, off_t den, FILE *file));
extern void fprint_off OF((FILE *, off_t, int));
-extern voidp xmalloc OF((unsigned int size));
/* in inflate.c */
extern int inflate OF((void));
+++ /dev/null
-This is gzip.info, produced by makeinfo version 4.2 from gzip.texi.
-
-This manual is for Gzip (version 1.3.5, 29 September 2002), and
-documents commands for compressing and decompressing data.
-
- Copyright (C) 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
-
- Copyright (C) 1992, 1993 Jean-loup Gailly
-
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation; with no Invariant Sections, with the Front-Cover texts
- being "A GNU Manual," and with the Back-Cover Texts as in (a)
- below. A copy of the license is included in the section entitled
- "GNU Free Documentation License."
-
- (a) The FSF's Back-Cover Text is: "You have freedom to copy and
- modify this GNU Manual, like GNU software. Copies published by
- the Free Software Foundation raise funds for GNU development."
-
-INFO-DIR-SECTION Individual utilities
-START-INFO-DIR-ENTRY
-* gzip: (gzip)Invoking gzip. Compress files.
-END-INFO-DIR-ENTRY
-
-INFO-DIR-SECTION Utilities
-START-INFO-DIR-ENTRY
-* Gzip: (gzip). The gzip command for compressing files.
-END-INFO-DIR-ENTRY
-
-\1f
-File: gzip.info, Node: Top, Up: (dir)
-
-Compressing Files
-*****************
-
-This manual is for Gzip (version 1.3.5, 29 September 2002), and
-documents commands for compressing and decompressing data.
-
- Copyright (C) 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
-
- Copyright (C) 1992, 1993 Jean-loup Gailly
-
- Permission is granted to copy, distribute and/or modify this
- document under the terms of the GNU Free Documentation License,
- Version 1.1 or any later version published by the Free Software
- Foundation; with no Invariant Sections, with the Front-Cover texts
- being "A GNU Manual," and with the Back-Cover Texts as in (a)
- below. A copy of the license is included in the section entitled
- "GNU Free Documentation License."
-
- (a) The FSF's Back-Cover Text is: "You have freedom to copy and
- modify this GNU Manual, like GNU software. Copies published by
- the Free Software Foundation raise funds for GNU development."
-
-* Menu:
-
-* Overview:: Preliminary information.
-* Sample:: Sample output from `gzip'.
-* Invoking gzip:: How to run `gzip'.
-* Advanced usage:: Concatenated files.
-* Environment:: The `GZIP' environment variable
-* Tapes:: Using `gzip' on tapes.
-* Problems:: Reporting bugs.
-* Copying This Manual:: How to make copies of this manual.
-* Concept Index:: Index of concepts.
-
-\1f
-File: gzip.info, Node: Overview, Next: Sample, Up: Top
-
-Overview
-********
-
- `gzip' reduces the size of the named files using Lempel-Ziv coding
-(LZ77). Whenever possible, each file is replaced by one with the
-extension `.gz', while keeping the same ownership modes, access and
-modification times. (The default extension is `-gz' for VMS, `z' for
-MSDOS, OS/2 FAT and Atari.) If no files are specified or if a file
-name is "-", the standard input is compressed to the standard output.
-`gzip' will only attempt to compress regular files. In particular, it
-will ignore symbolic links.
-
- If the new file name is too long for its file system, `gzip'
-truncates it. `gzip' attempts to truncate only the parts of the file
-name longer than 3 characters. (A part is delimited by dots.) If the
-name consists of small parts only, the longest parts are truncated.
-For example, if file names are limited to 14 characters, gzip.msdos.exe
-is compressed to gzi.msd.exe.gz. Names are not truncated on systems
-which do not have a limit on file name length.
-
- By default, `gzip' keeps the original file name and timestamp in the
-compressed file. These are used when decompressing the file with the
-`-N' option. This is useful when the compressed file name was truncated
-or when the time stamp was not preserved after a file transfer.
-
- Compressed files can be restored to their original form using `gzip
--d' or `gunzip' or `zcat'. If the original name saved in the
-compressed file is not suitable for its file system, a new name is
-constructed from the original one to make it legal.
-
- `gunzip' takes a list of files on its command line and replaces each
-file whose name ends with `.gz', `.z', `.Z', `-gz', `-z' or `_z' and
-which begins with the correct magic number with an uncompressed file
-without the original extension. `gunzip' also recognizes the special
-extensions `.tgz' and `.taz' as shorthands for `.tar.gz' and `.tar.Z'
-respectively. When compressing, `gzip' uses the `.tgz' extension if
-necessary instead of truncating a file with a `.tar' extension.
-
- `gunzip' can currently decompress files created by `gzip', `zip',
-`compress' or `pack'. The detection of the input format is automatic.
-When using the first two formats, `gunzip' checks a 32 bit CRC (cyclic
-redundancy check). For `pack', `gunzip' checks the uncompressed length.
-The `compress' format was not designed to allow consistency checks.
-However `gunzip' is sometimes able to detect a bad `.Z' file. If you
-get an error when uncompressing a `.Z' file, do not assume that the
-`.Z' file is correct simply because the standard `uncompress' does not
-complain. This generally means that the standard `uncompress' does not
-check its input, and happily generates garbage output. The SCO
-`compress -H' format (`lzh' compression method) does not include a CRC
-but also allows some consistency checks.
-
- Files created by `zip' can be uncompressed by `gzip' only if they
-have a single member compressed with the 'deflation' method. This
-feature is only intended to help conversion of `tar.zip' files to the
-`tar.gz' format. To extract a `zip' file with a single member, use a
-command like `gunzip <foo.zip' or `gunzip -S .zip foo.zip'. To extract
-`zip' files with several members, use `unzip' instead of `gunzip'.
-
- `zcat' is identical to `gunzip -c'. `zcat' uncompresses either a
-list of files on the command line or its standard input and writes the
-uncompressed data on standard output. `zcat' will uncompress files
-that have the correct magic number whether they have a `.gz' suffix or
-not.
-
- `gzip' uses the Lempel-Ziv algorithm used in `zip' and PKZIP. The
-amount of compression obtained depends on the size of the input and the
-distribution of common substrings. Typically, text such as source code
-or English is reduced by 60-70%. Compression is generally much better
-than that achieved by LZW (as used in `compress'), Huffman coding (as
-used in `pack'), or adaptive Huffman coding (`compact').
-
- Compression is always performed, even if the compressed file is
-slightly larger than the original. The worst case expansion is a few
-bytes for the `gzip' file header, plus 5 bytes every 32K block, or an
-expansion ratio of 0.015% for large files. Note that the actual number
-of used disk blocks almost never increases. `gzip' preserves the mode,
-ownership and timestamps of files when compressing or decompressing.
-
- The `gzip' file format is specified in P. Deutsch, GZIP file format
-specification version 4.3, Internet RFC 1952
-(ftp://ftp.isi.edu/in-notes/rfc1952.txt) (May 1996). The `zip'
-deflation format is specified in P. Deutsch, DEFLATE Compressed Data
-Format Specification version 1.3, Internet RFC 1951
-(ftp://ftp.isi.edu/in-notes/rfc1951.txt) (May 1996).
-
-\1f
-File: gzip.info, Node: Sample, Next: Invoking gzip, Prev: Overview, Up: Top
-
-Sample Output
-*************
-
- Here are some realistic examples of running `gzip'.
-
- This is the output of the command `gzip -h':
-
- gzip 1.3
- (1999-12-21)
- usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
- -c --stdout write on standard output, keep original files unchanged
- -d --decompress decompress
- -f --force force overwrite of output file and compress links
- -h --help give this help
- -l --list list compressed file contents
- -L --license display software license
- -n --no-name do not save or restore the original name and time stamp
- -N --name save or restore the original name and time stamp
- -q --quiet suppress all warnings
- -r --recursive operate recursively on directories
- -S .suf --suffix .suf use suffix .suf on compressed files
- -t --test test compressed file integrity
- -v --verbose verbose mode
- -V --version display version number
- -1 --fast compress faster
- -9 --best compress better
- file... files to (de)compress. If none given, use standard input.
- Report bugs to <bug-gzip@gnu.org>.
-
- This is the output of the command `gzip -v texinfo.tex':
-
- texinfo.tex: 69.7% -- replaced with texinfo.tex.gz
-
- The following command will find all `gzip' files in the current
-directory and subdirectories, and extract them in place without
-destroying the original:
-
- find . -name '*.gz' -print | sed 's/^\(.*\)[.]gz$/gunzip < "&" > "\1"/' | sh
-
-\1f
-File: gzip.info, Node: Invoking gzip, Next: Advanced usage, Prev: Sample, Up: Top
-
-Invoking `gzip'
-***************
-
- The format for running the `gzip' program is:
-
- gzip OPTION ...
-
- `gzip' supports the following options:
-
-`--stdout'
-`--to-stdout'
-`-c'
- Write output on standard output; keep original files unchanged.
- If there are several input files, the output consists of a
- sequence of independently compressed members. To obtain better
- compression, concatenate all input files before compressing them.
-
-`--decompress'
-`--uncompress'
-`-d'
- Decompress.
-
-`--force'
-`-f'
- Force compression or decompression even if the file has multiple
- links or the corresponding file already exists, or if the
- compressed data is read from or written to a terminal. If the
- input data is not in a format recognized by `gzip', and if the
- option `--stdout' is also given, copy the input data without
- change to the standard output: let `zcat' behave as `cat'. If `-f'
- is not given, and when not running in the background, `gzip'
- prompts to verify whether an existing file should be overwritten.
-
-`--help'
-`-h'
- Print an informative help message describing the options then quit.
-
-`--list'
-`-l'
- For each compressed file, list the following fields:
-
- compressed size: size of the compressed file
- uncompressed size: size of the uncompressed file
- ratio: compression ratio (0.0% if unknown)
- uncompressed_name: name of the uncompressed file
-
- The uncompressed size is given as `-1' for files not in `gzip'
- format, such as compressed `.Z' files. To get the uncompressed
- size for such a file, you can use:
-
- zcat file.Z | wc -c
-
- In combination with the `--verbose' option, the following fields
- are also displayed:
-
- method: compression method (deflate,compress,lzh,pack)
- crc: the 32-bit CRC of the uncompressed data
- date & time: time stamp for the uncompressed file
-
- The crc is given as ffffffff for a file not in gzip format.
-
- With `--verbose', the size totals and compression ratio for all
- files is also displayed, unless some sizes are unknown. With
- `--quiet', the title and totals lines are not displayed.
-
- The `gzip' format represents the the input size modulo 2^32, so
- the uncompressed size and compression ratio are listed incorrectly
- for uncompressed files 4 GB and larger. To work around this
- problem, you can use the following command to discover a large
- uncompressed file's true size:
-
- zcat file.gz | wc -c
-
-`--license'
-`-L'
- Display the `gzip' license then quit.
-
-`--no-name'
-`-n'
- When compressing, do not save the original file name and time
- stamp by default. (The original name is always saved if the name
- had to be truncated.) When decompressing, do not restore the
- original file name if present (remove only the `gzip' suffix from
- the compressed file name) and do not restore the original time
- stamp if present (copy it from the compressed file). This option
- is the default when decompressing.
-
-`--name'
-`-N'
- When compressing, always save the original file name and time
- stamp; this is the default. When decompressing, restore the
- original file name and time stamp if present. This option is
- useful on systems which have a limit on file name length or when
- the time stamp has been lost after a file transfer.
-
-`--quiet'
-`-q'
- Suppress all warning messages.
-
-`--recursive'
-`-r'
- Travel the directory structure recursively. If any of the file
- names specified on the command line are directories, `gzip' will
- descend into the directory and compress all the files it finds
- there (or decompress them in the case of `gunzip').
-
-`--suffix SUF'
-`-S SUF'
- Use suffix `SUF' instead of `.gz'. Any suffix can be given, but
- suffixes other than `.z' and `.gz' should be avoided to avoid
- confusion when files are transferred to other systems. A null
- suffix forces gunzip to try decompression on all given files
- regardless of suffix, as in:
-
- gunzip -S "" * (*.* for MSDOS)
-
- Previous versions of gzip used the `.z' suffix. This was changed to
- avoid a conflict with `pack'.
-
-`--test'
-`-t'
- Test. Check the compressed file integrity.
-
-`--verbose'
-`-v'
- Verbose. Display the name and percentage reduction for each file
- compressed.
-
-`--version'
-`-V'
- Version. Display the version number and compilation options, then
- quit.
-
-`--fast'
-`--best'
-`-N'
- Regulate the speed of compression using the specified digit N,
- where `-1' or `--fast' indicates the fastest compression method
- (less compression) and `--best' or `-9' indicates the slowest
- compression method (optimal compression). The default compression
- level is `-6' (that is, biased towards high compression at expense
- of speed).
-
-\1f
-File: gzip.info, Node: Advanced usage, Next: Environment, Prev: Invoking gzip, Up: Top
-
-Advanced usage
-**************
-
- Multiple compressed files can be concatenated. In this case,
-`gunzip' will extract all members at once. If one member is damaged,
-other members might still be recovered after removal of the damaged
-member. Better compression can be usually obtained if all members are
-decompressed and then recompressed in a single step.
-
- This is an example of concatenating `gzip' files:
-
- gzip -c file1 > foo.gz
- gzip -c file2 >> foo.gz
-
- Then
-
- gunzip -c foo
-
- is equivalent to
-
- cat file1 file2
-
- In case of damage to one member of a `.gz' file, other members can
-still be recovered (if the damaged member is removed). However, you can
-get better compression by compressing all members at once:
-
- cat file1 file2 | gzip > foo.gz
-
- compresses better than
-
- gzip -c file1 file2 > foo.gz
-
- If you want to recompress concatenated files to get better
-compression, do:
-
- zcat old.gz | gzip > new.gz
-
- If a compressed file consists of several members, the uncompressed
-size and CRC reported by the `--list' option applies to the last member
-only. If you need the uncompressed size for all members, you can use:
-
- zcat file.gz | wc -c
-
- If you wish to create a single archive file with multiple members so
-that members can later be extracted independently, use an archiver such
-as `tar' or `zip'. GNU `tar' supports the `-z' option to invoke `gzip'
-transparently. `gzip' is designed as a complement to `tar', not as a
-replacement.
-
-\1f
-File: gzip.info, Node: Environment, Next: Tapes, Prev: Advanced usage, Up: Top
-
-Environment
-***********
-
- The environment variable `GZIP' can hold a set of default options for
-`gzip'. These options are interpreted first and can be overwritten by
-explicit command line parameters. For example:
-
- for sh: GZIP="-8v --name"; export GZIP
- for csh: setenv GZIP "-8v --name"
- for MSDOS: set GZIP=-8v --name
-
- On Vax/VMS, the name of the environment variable is `GZIP_OPT', to
-avoid a conflict with the symbol set for invocation of the program.
-
-\1f
-File: gzip.info, Node: Tapes, Next: Problems, Prev: Environment, Up: Top
-
-Using `gzip' on tapes
-*********************
-
- When writing compressed data to a tape, it is generally necessary to
-pad the output with zeroes up to a block boundary. When the data is
-read and the whole block is passed to `gunzip' for decompression,
-`gunzip' detects that there is extra trailing garbage after the
-compressed data and emits a warning by default if the garbage contains
-nonzero bytes. You have to use the `--quiet' option to suppress the
-warning. This option can be set in the `GZIP' environment variable, as
-in:
-
- for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
- for csh: (setenv GZIP "-q"; tar -xfz --block-compress /dev/rst0)
-
- In the above example, `gzip' is invoked implicitly by the `-z'
-option of GNU `tar'. Make sure that the same block size (`-b' option
-of `tar') is used for reading and writing compressed data on tapes.
-(This example assumes you are using the GNU version of `tar'.)
-
-\1f
-File: gzip.info, Node: Problems, Next: Copying This Manual, Prev: Tapes, Up: Top
-
-Reporting Bugs
-**************
-
- If you find a bug in `gzip', please send electronic mail to
-<bug-gzip@gnu.org>. Include the version number, which you can find by
-running `gzip -V'. Also include in your message the hardware and
-operating system, the compiler used to compile `gzip', a description of
-the bug behavior, and the input to `gzip' that triggered the bug.
-
-\1f
-File: gzip.info, Node: Copying This Manual, Next: Concept Index, Prev: Problems, Up: Top
-
-Copying This Manual
-*******************
-
-* Menu:
-
-* GNU Free Documentation License:: License for copying this manual.
-
-\1f
-File: gzip.info, Node: GNU Free Documentation License, Up: Copying This Manual
-
-GNU Free Documentation License
-==============================
-
- Version 1.1, March 2000
- Copyright (C) 2000 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
-
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- 0. PREAMBLE
-
- The purpose of this License is to make a manual, textbook, or other
- written document "free" in the sense of freedom: to assure everyone
- the effective freedom to copy and redistribute it, with or without
- modifying it, either commercially or noncommercially. Secondarily,
- this License preserves for the author and publisher a way to get
- credit for their work, while not being considered responsible for
- modifications made by others.
-
- This License is a kind of "copyleft", which means that derivative
- works of the document must themselves be free in the same sense.
- It complements the GNU General Public License, which is a copyleft
- license designed for free software.
-
- We have designed this License in order to use it for manuals for
- free software, because free software needs free documentation: a
- free program should come with manuals providing the same freedoms
- that the software does. But this License is not limited to
- software manuals; it can be used for any textual work, regardless
- of subject matter or whether it is published as a printed book.
- We recommend this License principally for works whose purpose is
- instruction or reference.
-
- 1. APPLICABILITY AND DEFINITIONS
-
- This License applies to any manual or other work that contains a
- notice placed by the copyright holder saying it can be distributed
- under the terms of this License. The "Document", below, refers to
- any such manual or work. Any member of the public is a licensee,
- and is addressed as "you".
-
- A "Modified Version" of the Document means any work containing the
- Document or a portion of it, either copied verbatim, or with
- modifications and/or translated into another language.
-
- A "Secondary Section" is a named appendix or a front-matter
- section of the Document that deals exclusively with the
- relationship of the publishers or authors of the Document to the
- Document's overall subject (or to related matters) and contains
- nothing that could fall directly within that overall subject.
- (For example, if the Document is in part a textbook of
- mathematics, a Secondary Section may not explain any mathematics.)
- The relationship could be a matter of historical connection with
- the subject or with related matters, or of legal, commercial,
- philosophical, ethical or political position regarding them.
-
- The "Invariant Sections" are certain Secondary Sections whose
- titles are designated, as being those of Invariant Sections, in
- the notice that says that the Document is released under this
- License.
-
- The "Cover Texts" are certain short passages of text that are
- listed, as Front-Cover Texts or Back-Cover Texts, in the notice
- that says that the Document is released under this License.
-
- A "Transparent" copy of the Document means a machine-readable copy,
- represented in a format whose specification is available to the
- general public, whose contents can be viewed and edited directly
- and straightforwardly with generic text editors or (for images
- composed of pixels) generic paint programs or (for drawings) some
- widely available drawing editor, and that is suitable for input to
- text formatters or for automatic translation to a variety of
- formats suitable for input to text formatters. A copy made in an
- otherwise Transparent file format whose markup has been designed
- to thwart or discourage subsequent modification by readers is not
- Transparent. A copy that is not "Transparent" is called "Opaque".
-
- Examples of suitable formats for Transparent copies include plain
- ASCII without markup, Texinfo input format, LaTeX input format,
- SGML or XML using a publicly available DTD, and
- standard-conforming simple HTML designed for human modification.
- Opaque formats include PostScript, PDF, proprietary formats that
- can be read and edited only by proprietary word processors, SGML
- or XML for which the DTD and/or processing tools are not generally
- available, and the machine-generated HTML produced by some word
- processors for output purposes only.
-
- The "Title Page" means, for a printed book, the title page itself,
- plus such following pages as are needed to hold, legibly, the
- material this License requires to appear in the title page. For
- works in formats which do not have any title page as such, "Title
- Page" means the text near the most prominent appearance of the
- work's title, preceding the beginning of the body of the text.
-
- 2. VERBATIM COPYING
-
- You may copy and distribute the Document in any medium, either
- commercially or noncommercially, provided that this License, the
- copyright notices, and the license notice saying this License
- applies to the Document are reproduced in all copies, and that you
- add no other conditions whatsoever to those of this License. You
- may not use technical measures to obstruct or control the reading
- or further copying of the copies you make or distribute. However,
- you may accept compensation in exchange for copies. If you
- distribute a large enough number of copies you must also follow
- the conditions in section 3.
-
- You may also lend copies, under the same conditions stated above,
- and you may publicly display copies.
-
- 3. COPYING IN QUANTITY
-
- If you publish printed copies of the Document numbering more than
- 100, and the Document's license notice requires Cover Texts, you
- must enclose the copies in covers that carry, clearly and legibly,
- all these Cover Texts: Front-Cover Texts on the front cover, and
- Back-Cover Texts on the back cover. Both covers must also clearly
- and legibly identify you as the publisher of these copies. The
- front cover must present the full title with all words of the
- title equally prominent and visible. You may add other material
- on the covers in addition. Copying with changes limited to the
- covers, as long as they preserve the title of the Document and
- satisfy these conditions, can be treated as verbatim copying in
- other respects.
-
- If the required texts for either cover are too voluminous to fit
- legibly, you should put the first ones listed (as many as fit
- reasonably) on the actual cover, and continue the rest onto
- adjacent pages.
-
- If you publish or distribute Opaque copies of the Document
- numbering more than 100, you must either include a
- machine-readable Transparent copy along with each Opaque copy, or
- state in or with each Opaque copy a publicly-accessible
- computer-network location containing a complete Transparent copy
- of the Document, free of added material, which the general
- network-using public has access to download anonymously at no
- charge using public-standard network protocols. If you use the
- latter option, you must take reasonably prudent steps, when you
- begin distribution of Opaque copies in quantity, to ensure that
- this Transparent copy will remain thus accessible at the stated
- location until at least one year after the last time you
- distribute an Opaque copy (directly or through your agents or
- retailers) of that edition to the public.
-
- It is requested, but not required, that you contact the authors of
- the Document well before redistributing any large number of
- copies, to give them a chance to provide you with an updated
- version of the Document.
-
- 4. MODIFICATIONS
-
- You may copy and distribute a Modified Version of the Document
- under the conditions of sections 2 and 3 above, provided that you
- release the Modified Version under precisely this License, with
- the Modified Version filling the role of the Document, thus
- licensing distribution and modification of the Modified Version to
- whoever possesses a copy of it. In addition, you must do these
- things in the Modified Version:
-
- A. Use in the Title Page (and on the covers, if any) a title
- distinct from that of the Document, and from those of
- previous versions (which should, if there were any, be listed
- in the History section of the Document). You may use the
- same title as a previous version if the original publisher of
- that version gives permission.
-
- B. List on the Title Page, as authors, one or more persons or
- entities responsible for authorship of the modifications in
- the Modified Version, together with at least five of the
- principal authors of the Document (all of its principal
- authors, if it has less than five).
-
- C. State on the Title page the name of the publisher of the
- Modified Version, as the publisher.
-
- D. Preserve all the copyright notices of the Document.
-
- E. Add an appropriate copyright notice for your modifications
- adjacent to the other copyright notices.
-
- F. Include, immediately after the copyright notices, a license
- notice giving the public permission to use the Modified
- Version under the terms of this License, in the form shown in
- the Addendum below.
-
- G. Preserve in that license notice the full lists of Invariant
- Sections and required Cover Texts given in the Document's
- license notice.
-
- H. Include an unaltered copy of this License.
-
- I. Preserve the section entitled "History", and its title, and
- add to it an item stating at least the title, year, new
- authors, and publisher of the Modified Version as given on
- the Title Page. If there is no section entitled "History" in
- the Document, create one stating the title, year, authors,
- and publisher of the Document as given on its Title Page,
- then add an item describing the Modified Version as stated in
- the previous sentence.
-
- J. Preserve the network location, if any, given in the Document
- for public access to a Transparent copy of the Document, and
- likewise the network locations given in the Document for
- previous versions it was based on. These may be placed in
- the "History" section. You may omit a network location for a
- work that was published at least four years before the
- Document itself, or if the original publisher of the version
- it refers to gives permission.
-
- K. In any section entitled "Acknowledgments" or "Dedications",
- preserve the section's title, and preserve in the section all
- the substance and tone of each of the contributor
- acknowledgments and/or dedications given therein.
-
- L. Preserve all the Invariant Sections of the Document,
- unaltered in their text and in their titles. Section numbers
- or the equivalent are not considered part of the section
- titles.
-
- M. Delete any section entitled "Endorsements". Such a section
- may not be included in the Modified Version.
-
- N. Do not retitle any existing section as "Endorsements" or to
- conflict in title with any Invariant Section.
-
- If the Modified Version includes new front-matter sections or
- appendices that qualify as Secondary Sections and contain no
- material copied from the Document, you may at your option
- designate some or all of these sections as invariant. To do this,
- add their titles to the list of Invariant Sections in the Modified
- Version's license notice. These titles must be distinct from any
- other section titles.
-
- You may add a section entitled "Endorsements", provided it contains
- nothing but endorsements of your Modified Version by various
- parties--for example, statements of peer review or that the text
- has been approved by an organization as the authoritative
- definition of a standard.
-
- You may add a passage of up to five words as a Front-Cover Text,
- and a passage of up to 25 words as a Back-Cover Text, to the end
- of the list of Cover Texts in the Modified Version. Only one
- passage of Front-Cover Text and one of Back-Cover Text may be
- added by (or through arrangements made by) any one entity. If the
- Document already includes a cover text for the same cover,
- previously added by you or by arrangement made by the same entity
- you are acting on behalf of, you may not add another; but you may
- replace the old one, on explicit permission from the previous
- publisher that added the old one.
-
- The author(s) and publisher(s) of the Document do not by this
- License give permission to use their names for publicity for or to
- assert or imply endorsement of any Modified Version.
-
- 5. COMBINING DOCUMENTS
-
- You may combine the Document with other documents released under
- this License, under the terms defined in section 4 above for
- modified versions, provided that you include in the combination
- all of the Invariant Sections of all of the original documents,
- unmodified, and list them all as Invariant Sections of your
- combined work in its license notice.
-
- The combined work need only contain one copy of this License, and
- multiple identical Invariant Sections may be replaced with a single
- copy. If there are multiple Invariant Sections with the same name
- but different contents, make the title of each such section unique
- by adding at the end of it, in parentheses, the name of the
- original author or publisher of that section if known, or else a
- unique number. Make the same adjustment to the section titles in
- the list of Invariant Sections in the license notice of the
- combined work.
-
- In the combination, you must combine any sections entitled
- "History" in the various original documents, forming one section
- entitled "History"; likewise combine any sections entitled
- "Acknowledgments", and any sections entitled "Dedications". You
- must delete all sections entitled "Endorsements."
-
- 6. COLLECTIONS OF DOCUMENTS
-
- You may make a collection consisting of the Document and other
- documents released under this License, and replace the individual
- copies of this License in the various documents with a single copy
- that is included in the collection, provided that you follow the
- rules of this License for verbatim copying of each of the
- documents in all other respects.
-
- You may extract a single document from such a collection, and
- distribute it individually under this License, provided you insert
- a copy of this License into the extracted document, and follow
- this License in all other respects regarding verbatim copying of
- that document.
-
- 7. AGGREGATION WITH INDEPENDENT WORKS
-
- A compilation of the Document or its derivatives with other
- separate and independent documents or works, in or on a volume of
- a storage or distribution medium, does not as a whole count as a
- Modified Version of the Document, provided no compilation
- copyright is claimed for the compilation. Such a compilation is
- called an "aggregate", and this License does not apply to the
- other self-contained works thus compiled with the Document, on
- account of their being thus compiled, if they are not themselves
- derivative works of the Document.
-
- If the Cover Text requirement of section 3 is applicable to these
- copies of the Document, then if the Document is less than one
- quarter of the entire aggregate, the Document's Cover Texts may be
- placed on covers that surround only the Document within the
- aggregate. Otherwise they must appear on covers around the whole
- aggregate.
-
- 8. TRANSLATION
-
- Translation is considered a kind of modification, so you may
- distribute translations of the Document under the terms of section
- 4. Replacing Invariant Sections with translations requires special
- permission from their copyright holders, but you may include
- translations of some or all Invariant Sections in addition to the
- original versions of these Invariant Sections. You may include a
- translation of this License provided that you also include the
- original English version of this License. In case of a
- disagreement between the translation and the original English
- version of this License, the original English version will prevail.
-
- 9. TERMINATION
-
- You may not copy, modify, sublicense, or distribute the Document
- except as expressly provided for under this License. Any other
- attempt to copy, modify, sublicense or distribute the Document is
- void, and will automatically terminate your rights under this
- License. However, parties who have received copies, or rights,
- from you under this License will not have their licenses
- terminated so long as such parties remain in full compliance.
-
- 10. FUTURE REVISIONS OF THIS LICENSE
-
- The Free Software Foundation may publish new, revised versions of
- the GNU Free Documentation License from time to time. Such new
- versions will be similar in spirit to the present version, but may
- differ in detail to address new problems or concerns. See
- `http://www.gnu.org/copyleft/'.
-
- Each version of the License is given a distinguishing version
- number. If the Document specifies that a particular numbered
- version of this License "or any later version" applies to it, you
- have the option of following the terms and conditions either of
- that specified version or of any later version that has been
- published (not as a draft) by the Free Software Foundation. If
- the Document does not specify a version number of this License,
- you may choose any version ever published (not as a draft) by the
- Free Software Foundation.
-
-ADDENDUM: How to use this License for your documents
-----------------------------------------------------
-
- To use this License in a document you have written, include a copy of
-the License in the document and put the following copyright and license
-notices just after the title page:
-
- Copyright (C) YEAR YOUR NAME.
- Permission is granted to copy, distribute and/or modify this document
- under the terms of the GNU Free Documentation License, Version 1.1
- or any later version published by the Free Software Foundation;
- with the Invariant Sections being LIST THEIR TITLES, with the
- Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
- A copy of the license is included in the section entitled ``GNU
- Free Documentation License''.
-
- If you have no Invariant Sections, write "with no Invariant Sections"
-instead of saying which ones are invariant. If you have no Front-Cover
-Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being
-LIST"; likewise for Back-Cover Texts.
-
- If your document contains nontrivial examples of program code, we
-recommend releasing these examples in parallel under your choice of
-free software license, such as the GNU General Public License, to
-permit their use in free software.
-
-\1f
-File: gzip.info, Node: Concept Index, Prev: Copying This Manual, Up: Top
-
-Concept Index
-*************
-
-* Menu:
-
-* bugs: Problems.
-* concatenated files: Advanced usage.
-* Environment: Environment.
-* FDL, GNU Free Documentation License: GNU Free Documentation License.
-* invoking: Invoking gzip.
-* options: Invoking gzip.
-* overview: Overview.
-* sample: Sample.
-* tapes: Tapes.
-
-
-\1f
-Tag Table:
-Node: Top\7f1258
-Node: Overview\7f2630
-Node: Sample\7f7390
-Node: Invoking gzip\7f9051
-Node: Advanced usage\7f14032
-Node: Environment\7f15621
-Node: Tapes\7f16189
-Node: Problems\7f17203
-Node: Copying This Manual\7f17661
-Node: GNU Free Documentation License\7f17877
-Node: Concept Index\7f37741
-\1f
-End Tag Table
+++ /dev/null
-\input texinfo @c -*-texinfo-*-
-@c %**start of header
-@setfilename gzip.info
-@include version.texi
-@settitle Gzip User's Manual
-@finalout
-@setchapternewpage odd
-@c %**end of header
-@dircategory Utilities
-@direntry
-* gzip: (gzip). The gzip command for compressing files.
-@end direntry
-
-@copying
-This file documents the GNU `gzip' command for compressing files.
-
-This manual is for Gzip
-(version @value{VERSION}, @value{UPDATED}),
-and documents commands for compressing and decompressing data.
-
-Copyright @copyright{} 1998, 1999, 2001, 2002 Free Software
-Foundation, Inc.
-
-Copyright @copyright{} 1992, 1993 Jean-loup Gailly
-
-@quotation
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU Manual,''
-and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License.''
-
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
-@end quotation
-@end copying
-
-@titlepage
-@title gzip
-@subtitle The data compression program
-@subtitle for Gzip Version @value{VERSION}
-@subtitle @value{UPDATED}
-@author by Jean-loup Gailly
-
-@page
-@vskip 0pt plus 1filll
-@insertcopying
-@end titlepage
-
-@contents
-
-@ifnottex
-@node Top, , , (dir)
-@top Compressing Files
-
-@insertcopying
-@end ifnottex
-
-@menu
-* Overview:: Preliminary information.
-* Sample:: Sample output from @code{gzip}.
-* Invoking gzip:: How to run @code{gzip}.
-* Advanced usage:: Concatenated files.
-* Environment:: The @code{GZIP} environment variable
-* Tapes:: Using @code{gzip} on tapes.
-* Problems:: Reporting bugs.
-* Copying This Manual:: How to make copies of this manual.
-* Concept Index:: Index of concepts.
-@end menu
-
-@node Overview, Sample, , Top
-@chapter Overview
-@cindex overview
-
-@code{gzip} reduces the size of the named files using Lempel-Ziv coding
-(LZ77). Whenever possible, each file is replaced by one with the
-extension @samp{.gz}, while keeping the same ownership modes, access and
-modification times. (The default extension is @samp{-gz} for VMS,
-@samp{z} for MSDOS, OS/2 FAT and Atari.) If no files are specified or
-if a file name is "-", the standard input is compressed to the standard
-output. @code{gzip} will only attempt to compress regular files. In
-particular, it will ignore symbolic links.
-
-If the new file name is too long for its file system, @code{gzip}
-truncates it. @code{gzip} attempts to truncate only the parts of the
-file name longer than 3 characters. (A part is delimited by dots.) If
-the name consists of small parts only, the longest parts are truncated.
-For example, if file names are limited to 14 characters, gzip.msdos.exe
-is compressed to gzi.msd.exe.gz. Names are not truncated on systems
-which do not have a limit on file name length.
-
-By default, @code{gzip} keeps the original file name and timestamp in
-the compressed file. These are used when decompressing the file with the
-@samp{-N} option. This is useful when the compressed file name was
-truncated or when the time stamp was not preserved after a file
-transfer.
-
-Compressed files can be restored to their original form using @samp{gzip -d}
-or @code{gunzip} or @code{zcat}. If the original name saved in the
-compressed file is not suitable for its file system, a new name is
-constructed from the original one to make it legal.
-
-@code{gunzip} takes a list of files on its command line and replaces
-each file whose name ends with @samp{.gz}, @samp{.z}, @samp{.Z},
-@samp{-gz}, @samp{-z} or @samp{_z} and which begins with the correct
-magic number with an uncompressed file without the original extension.
-@code{gunzip} also recognizes the special extensions @samp{.tgz} and
-@samp{.taz} as shorthands for @samp{.tar.gz} and @samp{.tar.Z}
-respectively. When compressing, @code{gzip} uses the @samp{.tgz}
-extension if necessary instead of truncating a file with a @samp{.tar}
-extension.
-
-@code{gunzip} can currently decompress files created by @code{gzip},
-@code{zip}, @code{compress} or @code{pack}. The detection of the input
-format is automatic. When using the first two formats, @code{gunzip}
-checks a 32 bit CRC (cyclic redundancy check). For @code{pack},
-@code{gunzip} checks the uncompressed length. The @code{compress} format
-was not designed to allow consistency checks. However @code{gunzip} is
-sometimes able to detect a bad @samp{.Z} file. If you get an error when
-uncompressing a @samp{.Z} file, do not assume that the @samp{.Z} file is
-correct simply because the standard @code{uncompress} does not complain.
-This generally means that the standard @code{uncompress} does not check
-its input, and happily generates garbage output. The SCO @samp{compress
--H} format (@code{lzh} compression method) does not include a CRC but
-also allows some consistency checks.
-
-Files created by @code{zip} can be uncompressed by @code{gzip} only if
-they have a single member compressed with the 'deflation' method. This
-feature is only intended to help conversion of @code{tar.zip} files to
-the @code{tar.gz} format. To extract a @code{zip} file with a single
-member, use a command like @samp{gunzip <foo.zip} or @samp{gunzip -S
-.zip foo.zip}. To extract @code{zip} files with several
-members, use @code{unzip} instead of @code{gunzip}.
-
-@code{zcat} is identical to @samp{gunzip -c}. @code{zcat}
-uncompresses either a list of files on the command line or its standard
-input and writes the uncompressed data on standard output. @code{zcat}
-will uncompress files that have the correct magic number whether they
-have a @samp{.gz} suffix or not.
-
-@code{gzip} uses the Lempel-Ziv algorithm used in @code{zip} and PKZIP.
-The amount of compression obtained depends on the size of the input and
-the distribution of common substrings. Typically, text such as source
-code or English is reduced by 60-70%. Compression is generally much
-better than that achieved by LZW (as used in @code{compress}), Huffman
-coding (as used in @code{pack}), or adaptive Huffman coding
-(@code{compact}).
-
-Compression is always performed, even if the compressed file is slightly
-larger than the original. The worst case expansion is a few bytes for
-the @code{gzip} file header, plus 5 bytes every 32K block, or an expansion
-ratio of 0.015% for large files. Note that the actual number of used
-disk blocks almost never increases. @code{gzip} preserves the mode,
-ownership and timestamps of files when compressing or decompressing.
-
-The @code{gzip} file format is specified in P. Deutsch, @sc{gzip} file
-format specification version 4.3,
-@uref{ftp://ftp.isi.edu/in-notes/rfc1952.txt, Internet RFC 1952} (May
-1996). The @code{zip} deflation format is specified in P. Deutsch,
-@sc{deflate} Compressed Data Format Specification version 1.3,
-@uref{ftp://ftp.isi.edu/in-notes/rfc1951.txt, Internet RFC 1951} (May
-1996).
-
-@node Sample, Invoking gzip, Overview, Top
-@chapter Sample Output
-@cindex sample
-
-Here are some realistic examples of running @code{gzip}.
-
-This is the output of the command @samp{gzip -h}:
-
-@example
-gzip 1.3
-(1999-12-21)
-usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
- -c --stdout write on standard output, keep original files unchanged
- -d --decompress decompress
- -f --force force overwrite of output file and compress links
- -h --help give this help
- -l --list list compressed file contents
- -L --license display software license
- -n --no-name do not save or restore the original name and time stamp
- -N --name save or restore the original name and time stamp
- -q --quiet suppress all warnings
- -r --recursive operate recursively on directories
- -S .suf --suffix .suf use suffix .suf on compressed files
- -t --test test compressed file integrity
- -v --verbose verbose mode
- -V --version display version number
- -1 --fast compress faster
- -9 --best compress better
- file... files to (de)compress. If none given, use standard input.
-Report bugs to <bug-gzip@@gnu.org>.
-@end example
-
-This is the output of the command @samp{gzip -v texinfo.tex}:
-
-@example
-texinfo.tex: 69.7% -- replaced with texinfo.tex.gz
-@end example
-
-The following command will find all @code{gzip} files in the current
-directory and subdirectories, and extract them in place without
-destroying the original:
-
-@example
-find . -name '*.gz' -print | sed 's/^\(.*\)[.]gz$/gunzip < "&" > "\1"/' | sh
-@end example
-
-@node Invoking gzip, Advanced usage, Sample, Top
-@chapter Invoking @code{gzip}
-@cindex invoking
-@cindex options
-
-The format for running the @code{gzip} program is:
-
-@example
-gzip @var{option} @dots{}
-@end example
-
-@code{gzip} supports the following options:
-
-@table @samp
-@item --stdout
-@itemx --to-stdout
-@itemx -c
-Write output on standard output; keep original files unchanged.
-If there are several input files, the output consists of a sequence of
-independently compressed members. To obtain better compression,
-concatenate all input files before compressing them.
-
-@item --decompress
-@itemx --uncompress
-@itemx -d
-Decompress.
-
-@item --force
-@itemx -f
-Force compression or decompression even if the file has multiple links
-or the corresponding file already exists, or if the compressed data
-is read from or written to a terminal. If the input data is not in
-a format recognized by @code{gzip}, and if the option @samp{--stdout} is also
-given, copy the input data without change to the standard output: let
-@code{zcat} behave as @code{cat}. If @samp{-f} is not given, and
-when not running in the background, @code{gzip} prompts to verify
-whether an existing file should be overwritten.
-
-@item --help
-@itemx -h
-Print an informative help message describing the options then quit.
-
-@item --list
-@itemx -l
-For each compressed file, list the following fields:
-
-@example
-compressed size: size of the compressed file
-uncompressed size: size of the uncompressed file
-ratio: compression ratio (0.0% if unknown)
-uncompressed_name: name of the uncompressed file
-@end example
-
-The uncompressed size is given as @samp{-1} for files not in @code{gzip}
-format, such as compressed @samp{.Z} files. To get the uncompressed size for
-such a file, you can use:
-
-@example
-zcat file.Z | wc -c
-@end example
-
-In combination with the @samp{--verbose} option, the following fields are also
-displayed:
-
-@example
-method: compression method (deflate,compress,lzh,pack)
-crc: the 32-bit CRC of the uncompressed data
-date & time: time stamp for the uncompressed file
-@end example
-
-The crc is given as ffffffff for a file not in gzip format.
-
-With @samp{--verbose}, the size totals and compression ratio for all files
-is also displayed, unless some sizes are unknown. With @samp{--quiet},
-the title and totals lines are not displayed.
-
-The @code{gzip} format represents the the input size modulo
-@math{2^32}, so the uncompressed size and compression ratio are listed
-incorrectly for uncompressed files 4 GB and larger. To work around
-this problem, you can use the following command to discover a large
-uncompressed file's true size:
-
-@example
-zcat file.gz | wc -c
-@end example
-
-@item --license
-@itemx -L
-Display the @code{gzip} license then quit.
-
-@item --no-name
-@itemx -n
-When compressing, do not save the original file name and time stamp by
-default. (The original name is always saved if the name had to be
-truncated.) When decompressing, do not restore the original file name
-if present (remove only the @code{gzip}
-suffix from the compressed file name) and do not restore the original
-time stamp if present (copy it from the compressed file). This option
-is the default when decompressing.
-
-@item --name
-@itemx -N
-When compressing, always save the original file name and time stamp; this
-is the default. When decompressing, restore the original file name and
-time stamp if present. This option is useful on systems which have
-a limit on file name length or when the time stamp has been lost after
-a file transfer.
-
-@item --quiet
-@itemx -q
-Suppress all warning messages.
-
-@item --recursive
-@itemx -r
-Travel the directory structure recursively. If any of the file names
-specified on the command line are directories, @code{gzip} will descend
-into the directory and compress all the files it finds there (or
-decompress them in the case of @code{gunzip}).
-
-@item --rsyncable
-While compressing, synchronize the output occasionally based on the
-input. This increases size by less than 1 percent most cases, but
-means that the @code{rsync} program can take advantage of similarities
-in the uncompressed input when syncronizing two files compressed with
-this flag. @code{gunzip} cannot tell the difference between a
-compressed file created with this option, and one created without it.
-
-@item --suffix @var{suf}
-@itemx -S @var{suf}
-Use suffix @samp{@var{suf}} instead of @samp{.gz}. Any suffix can be
-given, but suffixes other than @samp{.z} and @samp{.gz} should be
-avoided to avoid confusion when files are transferred to other systems.
-A null suffix forces gunzip to try decompression on all given files
-regardless of suffix, as in:
-
-@example
-gunzip -S "" * (*.* for MSDOS)
-@end example
-
-Previous versions of gzip used the @samp{.z} suffix. This was changed to
-avoid a conflict with @code{pack}.
-
-@item --test
-@itemx -t
-Test. Check the compressed file integrity.
-
-@item --verbose
-@itemx -v
-Verbose. Display the name and percentage reduction for each file compressed.
-
-@item --version
-@itemx -V
-Version. Display the version number and compilation options, then quit.
-
-@item --fast
-@itemx --best
-@itemx -@var{n}
-Regulate the speed of compression using the specified digit @var{n},
-where @samp{-1} or @samp{--fast} indicates the fastest compression
-method (less compression) and @samp{--best} or @samp{-9} indicates the
-slowest compression method (optimal compression). The default
-compression level is @samp{-6} (that is, biased towards high compression at
-expense of speed).
-@end table
-
-@node Advanced usage, Environment, Invoking gzip, Top
-@chapter Advanced usage
-@cindex concatenated files
-
-Multiple compressed files can be concatenated. In this case,
-@code{gunzip} will extract all members at once. If one member is
-damaged, other members might still be recovered after removal of the
-damaged member. Better compression can be usually obtained if all
-members are decompressed and then recompressed in a single step.
-
-This is an example of concatenating @code{gzip} files:
-
-@example
-gzip -c file1 > foo.gz
-gzip -c file2 >> foo.gz
-@end example
-
-Then
-
-@example
-gunzip -c foo
-@end example
-
-is equivalent to
-
-@example
-cat file1 file2
-@end example
-
-In case of damage to one member of a @samp{.gz} file, other members can
-still be recovered (if the damaged member is removed). However,
-you can get better compression by compressing all members at once:
-
-@example
-cat file1 file2 | gzip > foo.gz
-@end example
-
-compresses better than
-
-@example
-gzip -c file1 file2 > foo.gz
-@end example
-
-If you want to recompress concatenated files to get better compression, do:
-
-@example
-zcat old.gz | gzip > new.gz
-@end example
-
-If a compressed file consists of several members, the uncompressed
-size and CRC reported by the @samp{--list} option applies to the last member
-only. If you need the uncompressed size for all members, you can use:
-
-@example
-zcat file.gz | wc -c
-@end example
-
-If you wish to create a single archive file with multiple members so
-that members can later be extracted independently, use an archiver such
-as @code{tar} or @code{zip}. GNU @code{tar} supports the @samp{-z}
-option to invoke @code{gzip} transparently. @code{gzip} is designed as a
-complement to @code{tar}, not as a replacement.
-
-@node Environment, Tapes, Advanced usage, Top
-@chapter Environment
-@cindex Environment
-
-The environment variable @code{GZIP} can hold a set of default options for
-@code{gzip}. These options are interpreted first and can be overwritten by
-explicit command line parameters. For example:
-
-@example
-for sh: GZIP="-8v --name"; export GZIP
-for csh: setenv GZIP "-8v --name"
-for MSDOS: set GZIP=-8v --name
-@end example
-
-On Vax/VMS, the name of the environment variable is @code{GZIP_OPT}, to
-avoid a conflict with the symbol set for invocation of the program.
-
-@node Tapes, Problems, Environment, Top
-@chapter Using @code{gzip} on tapes
-@cindex tapes
-
-When writing compressed data to a tape, it is generally necessary to pad
-the output with zeroes up to a block boundary. When the data is read and
-the whole block is passed to @code{gunzip} for decompression,
-@code{gunzip} detects that there is extra trailing garbage after the
-compressed data and emits a warning by default if the garbage contains
-nonzero bytes. You have to use the
-@samp{--quiet} option to suppress the warning. This option can be set in the
-@code{GZIP} environment variable, as in:
-
-@example
-for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
-for csh: (setenv GZIP "-q"; tar -xfz --block-compress /dev/rst0)
-@end example
-
-In the above example, @code{gzip} is invoked implicitly by the @samp{-z}
-option of GNU @code{tar}. Make sure that the same block size (@samp{-b}
-option of @code{tar}) is used for reading and writing compressed data on
-tapes. (This example assumes you are using the GNU version of
-@code{tar}.)
-
-@node Problems, Copying This Manual, Tapes, Top
-@chapter Reporting Bugs
-@cindex bugs
-
-If you find a bug in @code{gzip}, please send electronic mail to
-@email{bug-gzip@@gnu.org}. Include the version number,
-which you can find by running @w{@samp{gzip -V}}. Also include in your
-message the hardware and operating system, the compiler used to compile
-@code{gzip},
-a description of the bug behavior, and the input to @code{gzip} that triggered
-the bug.@refill
-
-@node Copying This Manual, Concept Index, Problems, Top
-@appendix Copying This Manual
-
-@menu
-* GNU Free Documentation License:: License for copying this manual.
-@end menu
-
-@include fdl.texi
-
-@node Concept Index, , Copying This Manual, Top
-@appendix Concept Index
-
-@printindex cp
-
-@bye
/* Inflate deflated data
- Copyright (C) 1997, 1998, 1999, 2002 Free Software Foundation, Inc.
+ Copyright (C) 1997, 1998, 1999, 2002, 2006 Free Software
+ Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.
- If not, write to the Free Software Foundation,
- 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
/* Not copyrighted 1992 by Mark Adler
version c10p1, 10 January 1993 */
chunks), otherwise the dynamic method is used. In the latter case, the
codes are customized to the probabilities in the current block, and so
can code it much better than the pre-determined fixed codes.
-
+
The Huffman codes themselves are decoded using a multi-level table
lookup, in order to maximize the speed of decoding plus the speed of
building the decoding tables. See the comments below that precede the
*/
#ifdef RCSID
-static char rcsid[] = "$Id: inflate.c,v 0.14 1993/06/10 13:27:04 jloup Exp $";
+static char rcsid[] = "$Id: inflate.c,v 1.6 2006/12/20 23:30:17 eggert Exp $";
#endif
#include <config.h>
/* Macros for inflate() bit peeking and grabbing.
The usage is:
-
+
NEEDBITS(j)
x = b & mask_bits[j];
DUMPBITS(j)
memzero(c, sizeof(c));
p = b; i = n;
do {
- Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"),
+ Tracecv(*p, (stderr, (n-i >= ' ' && n-i <= '~' ? "%c %d\n" : "0x%x %d\n"),
n-i, *p));
c[*p]++; /* assume all entries <= BMAX */
p++; /* Can't combine with above line (Solaris bug) */
} while (--i);
if (c[0] == n) /* null input--all zero length codes */
{
- *t = (struct huft *)NULL;
- *m = 0;
- return 2;
+ q = (struct huft *) malloc (2 * sizeof *q);
+ if (!q)
+ return 3;
+ hufts += 2;
+ q[0].v.t = (struct huft *) NULL;
+ q[1].e = 99; /* invalid code marker */
+ q[1].b = 1;
+ *t = q + 1;
+ *m = 1;
+ return 0;
}
q = (--p)->v.t;
free((char*)p);
p = q;
- }
+ }
return 0;
}
if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0)
{
if (i == 1) {
- fprintf(stderr, " incomplete literal tree\n");
+ Trace ((stderr, " incomplete literal tree\n"));
huft_free(tl);
}
return i; /* incomplete code set */
if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0)
{
if (i == 1) {
- fprintf(stderr, " incomplete distance tree\n");
+ Trace ((stderr, " incomplete distance tree\n"));
#ifdef PKZIP_BUG_WORKAROUND
i = 0;
}
/* return success */
-#ifdef DEBUG
- fprintf(stderr, "<%u> ", h);
-#endif /* DEBUG */
+ Trace ((stderr, "<%u> ", h));
return 0;
}
+++ /dev/null
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- :
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f "$src" ] || [ -d "$src" ]
- then
- :
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- :
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- :
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- :
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- :
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
--- /dev/null
+# Make gzip/lib -*-Makefile-*-
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+
+include gnulib.mk
+
+libgzip_a_LIBADD += $(LIBOBJS)
+libgzip_a_DEPENDENCIES += $(LIBOBJS)
+
+match.$(OBJEXT): match.c
+ cp $(srcdir)/match.c _match.S
+ $(CPP) $(CPPFLAGS) $(ASCPPFLAGS) _match.S > _match.i
+ @ASCPPPOST@ < _match.i > match_.s
+ $(CC) $(CPPFLAGS) $(CFLAGS) $(ASFLAGS_config) -c match_.s
+ mv match_.$(OBJEXT) $@
+ rm -f _match.S _match.i match_.s
+
+MOSTLYCLEANFILES += _match.S _match.i match_.s
--- /dev/null
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Make gzip/lib -*-Makefile-*-
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+# Copyright (C) 2004-2006 Free Software Foundation, Inc.
+#
+# This file is free software, distributed under the terms of the GNU
+# General Public License. As a special exception to the GNU General
+# Public License, this file may be distributed as part of a program
+# that contains a configuration script generated by Autoconf, under
+# the same distribution terms as the rest of that program.
+#
+# Generated by gnulib-tool.
+# Reproduce by: gnulib-tool --import --dir=. --local-dir=gl --lib=libgzip --source-base=.#bootmp/lib --m4-base=.#bootmp/m4 --doc-base=.#bootmp/doc --aux-dir=.#bootmp/build-aux --avoid=getline --avoid=rpmatch --no-libtool --macro-prefix=gl fcntl fcntl-safer fdl getopt stat-time sys_stat utimens xalloc yesno
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.hin $(srcdir)/gnulib.mk \
+ match.c
+subdir = lib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \
+ $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
+ $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fcntl-safer.m4 \
+ $(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/getopt.m4 \
+ $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/inline.m4 \
+ $(top_srcdir)/m4/shell.m4 $(top_srcdir)/m4/stat-time.m4 \
+ $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/sys_stat_h.m4 \
+ $(top_srcdir)/m4/timespec.m4 $(top_srcdir)/m4/unistd-safer.m4 \
+ $(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/utimbuf.m4 \
+ $(top_srcdir)/m4/utimens.m4 $(top_srcdir)/m4/utimes.m4 \
+ $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/yesno.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+AR = ar
+ARFLAGS = cru
+libgzip_a_AR = $(AR) $(ARFLAGS)
+am__DEPENDENCIES_1 =
+am_libgzip_a_OBJECTS = xalloc-die.$(OBJEXT)
+libgzip_a_OBJECTS = $(am_libgzip_a_OBJECTS)
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libgzip_a_SOURCES) $(EXTRA_libgzip_a_SOURCES)
+DIST_SOURCES = $(libgzip_a_SOURCES) $(EXTRA_libgzip_a_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ABSOLUTE_FCNTL_H = @ABSOLUTE_FCNTL_H@
+ABSOLUTE_SYS_STAT_H = @ABSOLUTE_SYS_STAT_H@
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+ASCPPFLAGS = @ASCPPFLAGS@
+ASCPPPOST = @ASCPPPOST@
+ASFLAGS_config = @ASFLAGS_config@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FCNTL_H = @FCNTL_H@
+GETOPT_H = @GETOPT_H@
+GREP = @GREP@
+HAVE__BOOL = @HAVE__BOOL@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBGZIP_LIBDEPS = @LIBGZIP_LIBDEPS@
+LIBGZIP_LTLIBDEPS = @LIBGZIP_LTLIBDEPS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STDBOOL_H = @STDBOOL_H@
+STRIP = @STRIP@
+SYS_STAT_H = @SYS_STAT_H@
+UNISTD_H = @UNISTD_H@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_prefix_program = @ac_prefix_program@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+gl_LIBOBJS = @gl_LIBOBJS@
+gl_LTLIBOBJS = @gl_LTLIBOBJS@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = 1.5 gnits
+noinst_HEADERS =
+noinst_LIBRARIES = libgzip.a
+noinst_LTLIBRARIES =
+EXTRA_DIST = error.c error.h exitfail.c exitfail.h fcntl_.h \
+ creat-safer.c fcntl--.h fcntl-safer.h open-safer.c getopt.c \
+ getopt1.c getopt_.h getopt_int.h stat-time.h stdbool_.h \
+ stat_.h timespec.h dup-safer.c fd-safer.c pipe-safer.c \
+ unistd--.h unistd-safer.h utimens.c utimens.h xalloc.h \
+ xmalloc.c yesno.c yesno.h
+BUILT_SOURCES = $(FCNTL_H) $(GETOPT_H) $(STDBOOL_H) $(SYS_STAT_H) \
+ $(UNISTD_H)
+SUFFIXES =
+MOSTLYCLEANFILES = core *.stackdump fcntl.h fcntl.h-t getopt.h \
+ getopt.h-t stdbool.h stdbool.h-t sys/stat.h sys/stat.h-t \
+ unistd.h _match.S _match.i match_.s
+MOSTLYCLEANDIRS = sys
+CLEANFILES =
+DISTCLEANFILES =
+MAINTAINERCLEANFILES =
+AM_CPPFLAGS =
+libgzip_a_SOURCES = exit.h gettext.h xalloc-die.c
+libgzip_a_LIBADD = $(gl_LIBOBJS) $(LIBOBJS)
+libgzip_a_DEPENDENCIES = $(gl_LIBOBJS) $(LIBOBJS)
+EXTRA_libgzip_a_SOURCES = error.c exitfail.c creat-safer.c \
+ open-safer.c getopt.c getopt1.c dup-safer.c fd-safer.c \
+ pipe-safer.c utimens.c xmalloc.c yesno.c
+all: $(BUILT_SOURCES) config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/gnulib.mk $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits lib/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnits lib/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status lib/config.h
+$(srcdir)/config.hin: $(am__configure_deps)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libgzip.a: $(libgzip_a_OBJECTS) $(libgzip_a_DEPENDENCIES)
+ -rm -f libgzip.a
+ $(libgzip_a_AR) libgzip.a $(libgzip_a_OBJECTS) $(libgzip_a_LIBADD)
+ $(RANLIB) libgzip.a
+
+clean-noinstLTLIBRARIES:
+ -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+ @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/match.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/creat-safer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dup-safer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exitfail.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fd-safer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/open-safer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pipe-safer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utimens.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xalloc-die.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmalloc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yesno.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) config.h
+installdirs:
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES clean-noinstLTLIBRARIES \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf $(DEPDIR) ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf $(DEPDIR) ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES clean-noinstLTLIBRARIES ctags distclean \
+ distclean-compile distclean-generic distclean-hdr \
+ distclean-tags distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-local pdf \
+ pdf-am ps ps-am tags uninstall uninstall-am
+
+
+# We need the following in order to create <fcntl.h> when the system
+# doesn't have one that works with the given compiler.
+fcntl.h: fcntl_.h
+ rm -f $@-t $@
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ sed -e 's|@''ABSOLUTE_FCNTL_H''@|$(ABSOLUTE_FCNTL_H)|g' \
+ < $(srcdir)/fcntl_.h; \
+ } > $@-t
+ mv $@-t $@
+
+# We need the following in order to create <getopt.h> when the system
+# doesn't have one that works with the given compiler.
+getopt.h: getopt_.h
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ cat $(srcdir)/getopt_.h; \
+ } > $@-t
+ mv -f $@-t $@
+
+# We need the following in order to create <stdbool.h> when the system
+# doesn't have one that works.
+stdbool.h: stdbool_.h
+ rm -f $@-t $@
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(srcdir)/stdbool_.h; \
+ } > $@-t
+ mv $@-t $@
+
+# We need the following in order to create <sys/stat.h> when the system
+# has one that is incomplete.
+sys/stat.h: stat_.h
+ test -d sys || mkdir sys
+ rm -f $@-t $@
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ sed -e 's|@''ABSOLUTE_SYS_STAT_H''@|$(ABSOLUTE_SYS_STAT_H)|g' \
+ < $(srcdir)/stat_.h; \
+ } > $@-t
+ mv $@-t $@
+
+# We need the following in order to create an empty placeholder for
+# <unistd.h> when the system doesn't have one.
+unistd.h:
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ echo '/* Empty placeholder for $@. */'; \
+ } > $@
+
+mostlyclean-local: mostlyclean-generic
+ @for dir in '' $(MOSTLYCLEANDIRS); do \
+ if test -n "$$dir" && test -d $$dir; then \
+ echo "rmdir $$dir"; rmdir $$dir; \
+ fi; \
+ done
+
+match.$(OBJEXT): match.c
+ cp $(srcdir)/match.c _match.S
+ $(CPP) $(CPPFLAGS) $(ASCPPFLAGS) _match.S > _match.i
+ @ASCPPPOST@ < _match.i > match_.s
+ $(CC) $(CPPFLAGS) $(CFLAGS) $(ASFLAGS_config) -c match_.s
+ mv match_.$(OBJEXT) $@
+ rm -f _match.S _match.i match_.s
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/* lib/config.hin. Generated from configure.ac by autoheader. */
+
+/* Define this to an absolute name of <fcntl.h>. */
+#undef ABSOLUTE_FCNTL_H
+
+/* Define this to an absolute name of <sys/stat.h>. */
+#undef ABSOLUTE_SYS_STAT_H
+
+/* Define if an assembler version of longest_match is available. */
+#undef ASMV
+
+/* Define to 1 when using the gnulib fcntl-safer module. */
+#undef GNULIB_FCNTL_SAFER
+
+/* Define to 1 if you have the `chown' function. */
+#undef HAVE_CHOWN
+
+/* Define to 1 if you have the declaration of `getenv', and to 0 if you don't.
+ */
+#undef HAVE_DECL_GETENV
+
+/* Define to 1 if you have the declaration of `mkdir', and to 0 if you don't.
+ */
+#undef HAVE_DECL_MKDIR
+
+/* Define to 1 if you have the declaration of `nanosleep', and to 0 if you
+ don't. */
+#undef HAVE_DECL_NANOSLEEP
+
+/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
+ don't. */
+#undef HAVE_DECL_STRERROR_R
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+ */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the `fchmod' function. */
+#undef HAVE_FCHMOD
+
+/* Define to 1 if you have the `fchown' function. */
+#undef HAVE_FCHOWN
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the `fdopendir' function. */
+#undef HAVE_FDOPENDIR
+
+/* Define to 1 if you have the `futimes' function. */
+#undef HAVE_FUTIMES
+
+/* Define to 1 if you have the `futimesat' function. */
+#undef HAVE_FUTIMESAT
+
+/* Define to 1 if you have the <getopt.h> header file. */
+#undef HAVE_GETOPT_H
+
+/* Define to 1 if you have the `getopt_long_only' function. */
+#undef HAVE_GETOPT_LONG_ONLY
+
+/* Define to 1 if the compiler supports one of the keywords 'inline',
+ '__inline__', '__inline' and effectively inlines functions marked as such.
+ */
+#undef HAVE_INLINE
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <io.h> header file. */
+#undef HAVE_IO_H
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the `lstat' function. */
+#undef HAVE_LSTAT
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the `pipe' function. */
+#undef HAVE_PIPE
+
+/* Define to 1 if you have the `siginterrupt' function. */
+#undef HAVE_SIGINTERRUPT
+
+/* Define to 1 if stdbool.h conforms to C99. */
+#undef HAVE_STDBOOL_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strerror_r' function. */
+#undef HAVE_STRERROR_R
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if `st_atimensec' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIMENSEC
+
+/* Define to 1 if `st_atimespec.tv_nsec' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
+
+/* Define to 1 if `st_atim.st__tim.tv_nsec' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
+
+/* Define to 1 if `st_atim.tv_nsec' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
+
+/* Define to 1 if `st_spare1' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_SPARE1
+
+/* Define if struct timespec is declared in <time.h>. */
+#undef HAVE_STRUCT_TIMESPEC
+
+/* Define if struct utimbuf is declared -- usually in <utime.h>. Some systems
+ have utime.h but don't declare the struct anywhere. */
+#undef HAVE_STRUCT_UTIMBUF
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+ */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+ */
+#undef HAVE_SYS_NDIR_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the <utime.h> header file. */
+#undef HAVE_UTIME_H
+
+/* Define to 1 if O_NOATIME works. */
+#undef HAVE_WORKING_O_NOATIME
+
+/* Define to 1 if O_NOFOLLOW works. */
+#undef HAVE_WORKING_O_NOFOLLOW
+
+/* Define if utimes works properly. */
+#undef HAVE_WORKING_UTIMES
+
+/* Define to 1 if the system has the type `_Bool'. */
+#undef HAVE__BOOL
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+#undef STAT_MACROS_BROKEN
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if strerror_r returns char *. */
+#undef STRERROR_R_CHAR_P
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to 1 if the type of the st_atim member of a struct stat is struct
+ timespec. */
+#undef TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if on AIX 3.
+ System headers sometimes define this.
+ We just want to avoid a redefinition error message. */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Enable GNU extensions on systems that have them. */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+ this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Enable extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+
+/* Define to rpl_ if the getopt replacement functions and variables should be
+ used. */
+#undef __GETOPT_PREFIX
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to `long int' if <sys/types.h> does not define. */
+#undef off_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
--- /dev/null
+/* Invoke creat, but avoid some glitches.
+
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Jim Meyering. */
+
+#include <config.h>
+
+#include "fcntl-safer.h"
+
+#include <fcntl.h>
+#include "unistd-safer.h"
+
+int
+creat_safer (char const *file, mode_t mode)
+{
+ return fd_safer (creat (file, mode));
+}
--- /dev/null
+/* Invoke dup, but avoid some glitches.
+
+ Copyright (C) 2001, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#include <config.h>
+
+#include "unistd-safer.h"
+
+#include <fcntl.h>
+
+#include <unistd.h>
+#ifndef STDERR_FILENO
+# define STDERR_FILENO 2
+#endif
+
+/* Like dup, but do not return STDIN_FILENO, STDOUT_FILENO, or
+ STDERR_FILENO. */
+
+int
+dup_safer (int fd)
+{
+#ifdef F_DUPFD
+ return fcntl (fd, F_DUPFD, STDERR_FILENO + 1);
+#else
+ /* fd_safer calls us back, but eventually the recursion unwinds and
+ does the right thing. */
+ return fd_safer (dup (fd));
+#endif
+}
--- /dev/null
+/* Error handler for noninteractive utilities
+ Copyright (C) 1990-1998, 2000-2005, 2006 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by David MacKenzie <djm@gnu.ai.mit.edu>. */
+
+#if !_LIBC
+# include <config.h>
+#endif
+
+#include "error.h"
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if !_LIBC && ENABLE_NLS
+# include "gettext.h"
+#endif
+
+#ifdef _LIBC
+# include <libintl.h>
+# include <stdbool.h>
+# include <stdint.h>
+# include <wchar.h>
+# define mbsrtowcs __mbsrtowcs
+#endif
+
+#if USE_UNLOCKED_IO
+# include "unlocked-io.h"
+#endif
+
+#ifndef _
+# define _(String) String
+#endif
+
+/* If NULL, error will flush stdout, then print on stderr the program
+ name, a colon and a space. Otherwise, error will call this
+ function without parameters instead. */
+void (*error_print_progname) (void);
+
+/* This variable is incremented each time `error' is called. */
+unsigned int error_message_count;
+
+#ifdef _LIBC
+/* In the GNU C library, there is a predefined variable for this. */
+
+# define program_name program_invocation_name
+# include <errno.h>
+# include <limits.h>
+# include <libio/libioP.h>
+
+/* In GNU libc we want do not want to use the common name `error' directly.
+ Instead make it a weak alias. */
+extern void __error (int status, int errnum, const char *message, ...)
+ __attribute__ ((__format__ (__printf__, 3, 4)));
+extern void __error_at_line (int status, int errnum, const char *file_name,
+ unsigned int line_number, const char *message,
+ ...)
+ __attribute__ ((__format__ (__printf__, 5, 6)));;
+# define error __error
+# define error_at_line __error_at_line
+
+# include <libio/iolibio.h>
+# define fflush(s) INTUSE(_IO_fflush) (s)
+# undef putc
+# define putc(c, fp) INTUSE(_IO_putc) (c, fp)
+
+# include <bits/libc-lock.h>
+
+#else /* not _LIBC */
+
+# if !HAVE_DECL_STRERROR_R && STRERROR_R_CHAR_P
+# ifndef HAVE_DECL_STRERROR_R
+"this configure-time declaration test was not run"
+# endif
+char *strerror_r ();
+# endif
+
+/* The calling program should define program_name and set it to the
+ name of the executing program. */
+extern char *program_name;
+
+# if HAVE_STRERROR_R || defined strerror_r
+# define __strerror_r strerror_r
+# endif /* HAVE_STRERROR_R || defined strerror_r */
+#endif /* not _LIBC */
+
+static void
+print_errno_message (int errnum)
+{
+ char const *s;
+
+#if defined HAVE_STRERROR_R || _LIBC
+ char errbuf[1024];
+# if STRERROR_R_CHAR_P || _LIBC
+ s = __strerror_r (errnum, errbuf, sizeof errbuf);
+# else
+ if (__strerror_r (errnum, errbuf, sizeof errbuf) == 0)
+ s = errbuf;
+ else
+ s = 0;
+# endif
+#else
+ s = strerror (errnum);
+#endif
+
+#if !_LIBC
+ if (! s)
+ s = _("Unknown system error");
+#endif
+
+#if _LIBC
+ __fxprintf (NULL, ": %s", s);
+#else
+ fprintf (stderr, ": %s", s);
+#endif
+}
+
+static void
+error_tail (int status, int errnum, const char *message, va_list args)
+{
+#if _LIBC
+ if (_IO_fwide (stderr, 0) > 0)
+ {
+# define ALLOCA_LIMIT 2000
+ size_t len = strlen (message) + 1;
+ wchar_t *wmessage = NULL;
+ mbstate_t st;
+ size_t res;
+ const char *tmp;
+ bool use_malloc = false;
+
+ while (1)
+ {
+ if (__libc_use_alloca (len * sizeof (wchar_t)))
+ wmessage = (wchar_t *) alloca (len * sizeof (wchar_t));
+ else
+ {
+ if (!use_malloc)
+ wmessage = NULL;
+
+ wchar_t *p = (wchar_t *) realloc (wmessage,
+ len * sizeof (wchar_t));
+ if (p == NULL)
+ {
+ free (wmessage);
+ fputws_unlocked (L"out of memory\n", stderr);
+ return;
+ }
+ wmessage = p;
+ use_malloc = true;
+ }
+
+ memset (&st, '\0', sizeof (st));
+ tmp = message;
+
+ res = mbsrtowcs (wmessage, &tmp, len, &st);
+ if (res != len)
+ break;
+
+ if (__builtin_expect (len >= SIZE_MAX / 2, 0))
+ {
+ /* This really should not happen if everything is fine. */
+ res = (size_t) -1;
+ break;
+ }
+
+ len *= 2;
+ }
+
+ if (res == (size_t) -1)
+ {
+ /* The string cannot be converted. */
+ if (use_malloc)
+ {
+ free (wmessage);
+ use_malloc = false;
+ }
+ wmessage = (wchar_t *) L"???";
+ }
+
+ __vfwprintf (stderr, wmessage, args);
+
+ if (use_malloc)
+ free (wmessage);
+ }
+ else
+#endif
+ vfprintf (stderr, message, args);
+ va_end (args);
+
+ ++error_message_count;
+ if (errnum)
+ print_errno_message (errnum);
+#if _LIBC
+ __fxprintf (NULL, "\n");
+#else
+ putc ('\n', stderr);
+#endif
+ fflush (stderr);
+ if (status)
+ exit (status);
+}
+
+
+/* Print the program name and error message MESSAGE, which is a printf-style
+ format string with optional args.
+ If ERRNUM is nonzero, print its corresponding system error message.
+ Exit with status STATUS if it is nonzero. */
+void
+error (int status, int errnum, const char *message, ...)
+{
+ va_list args;
+
+#if defined _LIBC && defined __libc_ptf_call
+ /* We do not want this call to be cut short by a thread
+ cancellation. Therefore disable cancellation for now. */
+ int state = PTHREAD_CANCEL_ENABLE;
+ __libc_ptf_call (pthread_setcancelstate, (PTHREAD_CANCEL_DISABLE, &state),
+ 0);
+#endif
+
+ fflush (stdout);
+#ifdef _LIBC
+ _IO_flockfile (stderr);
+#endif
+ if (error_print_progname)
+ (*error_print_progname) ();
+ else
+ {
+#if _LIBC
+ __fxprintf (NULL, "%s: ", program_name);
+#else
+ fprintf (stderr, "%s: ", program_name);
+#endif
+ }
+
+ va_start (args, message);
+ error_tail (status, errnum, message, args);
+
+#ifdef _LIBC
+ _IO_funlockfile (stderr);
+# ifdef __libc_ptf_call
+ __libc_ptf_call (pthread_setcancelstate, (state, NULL), 0);
+# endif
+#endif
+}
+\f
+/* Sometimes we want to have at most one error per line. This
+ variable controls whether this mode is selected or not. */
+int error_one_per_line;
+
+void
+error_at_line (int status, int errnum, const char *file_name,
+ unsigned int line_number, const char *message, ...)
+{
+ va_list args;
+
+ if (error_one_per_line)
+ {
+ static const char *old_file_name;
+ static unsigned int old_line_number;
+
+ if (old_line_number == line_number
+ && (file_name == old_file_name
+ || strcmp (old_file_name, file_name) == 0))
+ /* Simply return and print nothing. */
+ return;
+
+ old_file_name = file_name;
+ old_line_number = line_number;
+ }
+
+#if defined _LIBC && defined __libc_ptf_call
+ /* We do not want this call to be cut short by a thread
+ cancellation. Therefore disable cancellation for now. */
+ int state = PTHREAD_CANCEL_ENABLE;
+ __libc_ptf_call (pthread_setcancelstate, (PTHREAD_CANCEL_DISABLE, &state),
+ 0);
+#endif
+
+ fflush (stdout);
+#ifdef _LIBC
+ _IO_flockfile (stderr);
+#endif
+ if (error_print_progname)
+ (*error_print_progname) ();
+ else
+ {
+#if _LIBC
+ __fxprintf (NULL, "%s:", program_name);
+#else
+ fprintf (stderr, "%s:", program_name);
+#endif
+ }
+
+#if _LIBC
+ __fxprintf (NULL, file_name != NULL ? "%s:%d: " : " ",
+ file_name, line_number);
+#else
+ fprintf (stderr, file_name != NULL ? "%s:%d: " : " ",
+ file_name, line_number);
+#endif
+
+ va_start (args, message);
+ error_tail (status, errnum, message, args);
+
+#ifdef _LIBC
+ _IO_funlockfile (stderr);
+# ifdef __libc_ptf_call
+ __libc_ptf_call (pthread_setcancelstate, (state, NULL), 0);
+# endif
+#endif
+}
+
+#ifdef _LIBC
+/* Make the weak alias. */
+# undef error
+# undef error_at_line
+weak_alias (__error, error)
+weak_alias (__error_at_line, error_at_line)
+#endif
--- /dev/null
+/* Declaration for error-reporting function
+ Copyright (C) 1995, 1996, 1997, 2003, 2006 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _ERROR_H
+#define _ERROR_H 1
+
+#ifndef __attribute__
+/* This feature is available in gcc versions 2.5 and later. */
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5) || __STRICT_ANSI__
+# define __attribute__(Spec) /* empty */
+# endif
+/* The __-protected variants of `format' and `printf' attributes
+ are accepted by gcc versions 2.6.4 (effectively 2.7) and later. */
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 7)
+# define __format__ format
+# define __printf__ printf
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Print a message with `fprintf (stderr, FORMAT, ...)';
+ if ERRNUM is nonzero, follow it with ": " and strerror (ERRNUM).
+ If STATUS is nonzero, terminate the program with `exit (STATUS)'. */
+
+extern void error (int __status, int __errnum, const char *__format, ...)
+ __attribute__ ((__format__ (__printf__, 3, 4)));
+
+extern void error_at_line (int __status, int __errnum, const char *__fname,
+ unsigned int __lineno, const char *__format, ...)
+ __attribute__ ((__format__ (__printf__, 5, 6)));
+
+/* If NULL, error will flush stdout, then print on stderr the program
+ name, a colon and a space. Otherwise, error will call this
+ function without parameters instead. */
+extern void (*error_print_progname) (void);
+
+/* This variable is incremented each time `error' is called. */
+extern unsigned int error_message_count;
+
+/* Sometimes we want to have at most one error per line. This
+ variable controls whether this mode is selected or not. */
+extern int error_one_per_line;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* error.h */
--- /dev/null
+/* exit() function.
+ Copyright (C) 1995, 2001 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _EXIT_H
+#define _EXIT_H
+
+/* Get exit() declaration. */
+#include <stdlib.h>
+
+/* Some systems do not define EXIT_*, despite otherwise supporting C89. */
+#ifndef EXIT_SUCCESS
+# define EXIT_SUCCESS 0
+#endif
+#ifndef EXIT_FAILURE
+# define EXIT_FAILURE 1
+#endif
+
+#endif /* _EXIT_H */
--- /dev/null
+/* Failure exit status
+
+ Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.
+ If not, write to the Free Software Foundation,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#include <config.h>
+
+#include "exitfail.h"
+#include "exit.h"
+
+int volatile exit_failure = EXIT_FAILURE;
--- /dev/null
+/* Failure exit status
+
+ Copyright (C) 2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.
+ If not, write to the Free Software Foundation,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+extern int volatile exit_failure;
--- /dev/null
+/* Like fcntl.h, but redefine some names to avoid glitches.
+
+ Copyright (C) 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#include <fcntl.h>
+#include "fcntl-safer.h"
+
+#undef open
+#define open open_safer
+
+#undef creat
+#define creat creat_safer
--- /dev/null
+/* Invoke fcntl-like functions, but avoid some glitches.
+
+ Copyright (C) 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#include <sys/types.h>
+
+int open_safer (char const *, int, ...);
+int creat_safer (char const *, mode_t);
--- /dev/null
+/* Like <fcntl.h>, but with non-working flags defined to 0.
+
+ Copyright (C) 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* written by Paul Eggert */
+
+#ifndef _GL_FCNTL_H
+#define _GL_FCNTL_H
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include @ABSOLUTE_FCNTL_H@
+
+#if !defined O_DIRECT && defined O_DIRECTIO
+/* Tru64 spells it `O_DIRECTIO'. */
+# define O_DIRECT O_DIRECTIO
+#endif
+
+#ifndef O_DIRECT
+# define O_DIRECT 0
+#endif
+
+#ifndef O_DIRECTORY
+# define O_DIRECTORY 0
+#endif
+
+#ifndef O_DSYNC
+# define O_DSYNC 0
+#endif
+
+#ifndef O_NDELAY
+# define O_NDELAY 0
+#endif
+
+#ifndef O_NOATIME
+# define O_NOATIME 0
+#endif
+
+#ifndef O_NONBLOCK
+# define O_NONBLOCK O_NDELAY
+#endif
+
+#ifndef O_NOCTTY
+# define O_NOCTTY 0
+#endif
+
+#ifndef O_NOFOLLOW
+# define O_NOFOLLOW 0
+#endif
+
+#ifndef O_NOLINKS
+# define O_NOLINKS 0
+#endif
+
+#ifndef O_RSYNC
+# define O_RSYNC 0
+#endif
+
+#ifndef O_SYNC
+# define O_SYNC 0
+#endif
+
+/* For systems that distinguish between text and binary I/O.
+ O_BINARY is usually declared in fcntl.h */
+#if !defined O_BINARY && defined _O_BINARY
+ /* For MSC-compatible compilers. */
+# define O_BINARY _O_BINARY
+# define O_TEXT _O_TEXT
+#endif
+
+#ifdef __BEOS__
+ /* BeOS 5 has O_BINARY and O_TEXT, but they have no effect. */
+# undef O_BINARY
+# undef O_TEXT
+#endif
+
+#ifndef O_BINARY
+# define O_BINARY 0
+# define O_TEXT 0
+#endif
+
+#endif
--- /dev/null
+/* Return a safer copy of a file descriptor.
+
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#include <config.h>
+
+#include "unistd-safer.h"
+
+#include <errno.h>
+
+#include <unistd.h>
+#ifndef STDIN_FILENO
+# define STDIN_FILENO 0
+#endif
+#ifndef STDERR_FILENO
+# define STDERR_FILENO 2
+#endif
+
+/* Return FD, unless FD would be a copy of standard input, output, or
+ error; in that case, return a duplicate of FD, closing FD. On
+ failure to duplicate, close FD, set errno, and return -1. Preserve
+ errno if FD is negative, so that the caller can always inspect
+ errno when the returned value is negative.
+
+ This function is usefully wrapped around functions that return file
+ descriptors, e.g., fd_safer (open ("file", O_RDONLY)). */
+
+int
+fd_safer (int fd)
+{
+ if (STDIN_FILENO <= fd && fd <= STDERR_FILENO)
+ {
+ int f = dup_safer (fd);
+ int e = errno;
+ close (fd);
+ errno = e;
+ fd = f;
+ }
+
+ return fd;
+}
--- /dev/null
+/* Getopt for GNU.
+ NOTE: getopt is now part of the C library, so if you don't know what
+ "Keep this file name-space clean" means, talk to drepper@gnu.org
+ before changing it!
+ Copyright (C) 1987,88,89,90,91,92,93,94,95,96,98,99,2000,2001,2002,2003,2004,2006
+ Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+\f
+#ifndef _LIBC
+# include <config.h>
+#endif
+
+#include "getopt.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#ifdef __VMS
+# include <unixlib.h>
+#endif
+
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "gettext.h"
+# define _(msgid) gettext (msgid)
+#endif
+
+#if defined _LIBC && defined USE_IN_LIBIO
+# include <wchar.h>
+#endif
+
+#ifndef attribute_hidden
+# define attribute_hidden
+#endif
+
+/* Unlike standard Unix `getopt', functions like `getopt_long'
+ let the user intersperse the options with the other arguments.
+
+ As `getopt_long' works, it permutes the elements of ARGV so that,
+ when it is done, all the options precede everything else. Thus
+ all application programs are extended to handle flexible argument order.
+
+ Using `getopt' or setting the environment variable POSIXLY_CORRECT
+ disables permutation.
+ Then the application's behavior is completely standard.
+
+ GNU application programs can use a third alternative mode in which
+ they can distinguish the relative order of options and other arguments. */
+
+#include "getopt_int.h"
+
+/* For communication from `getopt' to the caller.
+ When `getopt' finds an option that takes an argument,
+ the argument value is returned here.
+ Also, when `ordering' is RETURN_IN_ORDER,
+ each non-option ARGV-element is returned here. */
+
+char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+ This is used for communication to and from the caller
+ and for communication between successive calls to `getopt'.
+
+ On entry to `getopt', zero means this is the first call; initialize.
+
+ When `getopt' returns -1, this is the index of the first of the
+ non-option elements that the caller should itself scan.
+
+ Otherwise, `optind' communicates from one call to the next
+ how much of ARGV has been scanned so far. */
+
+/* 1003.2 says this must be 1 before any call. */
+int optind = 1;
+
+/* Callers store zero here to inhibit the error message
+ for unrecognized options. */
+
+int opterr = 1;
+
+/* Set to an option character which was unrecognized.
+ This must be initialized on some systems to avoid linking in the
+ system's own getopt implementation. */
+
+int optopt = '?';
+
+/* Keep a global copy of all internal members of getopt_data. */
+
+static struct _getopt_data getopt_data;
+
+\f
+#if defined HAVE_DECL_GETENV && !HAVE_DECL_GETENV
+extern char *getenv ();
+#endif
+\f
+#ifdef _LIBC
+/* Stored original parameters.
+ XXX This is no good solution. We should rather copy the args so
+ that we can compare them later. But we must not use malloc(3). */
+extern int __libc_argc;
+extern char **__libc_argv;
+
+/* Bash 2.0 gives us an environment variable containing flags
+ indicating ARGV elements that should not be considered arguments. */
+
+# ifdef USE_NONOPTION_FLAGS
+/* Defined in getopt_init.c */
+extern char *__getopt_nonoption_flags;
+# endif
+
+# ifdef USE_NONOPTION_FLAGS
+# define SWAP_FLAGS(ch1, ch2) \
+ if (d->__nonoption_flags_len > 0) \
+ { \
+ char __tmp = __getopt_nonoption_flags[ch1]; \
+ __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \
+ __getopt_nonoption_flags[ch2] = __tmp; \
+ }
+# else
+# define SWAP_FLAGS(ch1, ch2)
+# endif
+#else /* !_LIBC */
+# define SWAP_FLAGS(ch1, ch2)
+#endif /* _LIBC */
+
+/* Exchange two adjacent subsequences of ARGV.
+ One subsequence is elements [first_nonopt,last_nonopt)
+ which contains all the non-options that have been skipped so far.
+ The other is elements [last_nonopt,optind), which contains all
+ the options processed since those non-options were skipped.
+
+ `first_nonopt' and `last_nonopt' are relocated so that they describe
+ the new indices of the non-options in ARGV after they are moved. */
+
+static void
+exchange (char **argv, struct _getopt_data *d)
+{
+ int bottom = d->__first_nonopt;
+ int middle = d->__last_nonopt;
+ int top = d->optind;
+ char *tem;
+
+ /* Exchange the shorter segment with the far end of the longer segment.
+ That puts the shorter segment into the right place.
+ It leaves the longer segment in the right place overall,
+ but it consists of two parts that need to be swapped next. */
+
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+ /* First make sure the handling of the `__getopt_nonoption_flags'
+ string can work normally. Our top argument must be in the range
+ of the string. */
+ if (d->__nonoption_flags_len > 0 && top >= d->__nonoption_flags_max_len)
+ {
+ /* We must extend the array. The user plays games with us and
+ presents new arguments. */
+ char *new_str = malloc (top + 1);
+ if (new_str == NULL)
+ d->__nonoption_flags_len = d->__nonoption_flags_max_len = 0;
+ else
+ {
+ memset (__mempcpy (new_str, __getopt_nonoption_flags,
+ d->__nonoption_flags_max_len),
+ '\0', top + 1 - d->__nonoption_flags_max_len);
+ d->__nonoption_flags_max_len = top + 1;
+ __getopt_nonoption_flags = new_str;
+ }
+ }
+#endif
+
+ while (top > middle && middle > bottom)
+ {
+ if (top - middle > middle - bottom)
+ {
+ /* Bottom segment is the short one. */
+ int len = middle - bottom;
+ register int i;
+
+ /* Swap it with the top part of the top segment. */
+ for (i = 0; i < len; i++)
+ {
+ tem = argv[bottom + i];
+ argv[bottom + i] = argv[top - (middle - bottom) + i];
+ argv[top - (middle - bottom) + i] = tem;
+ SWAP_FLAGS (bottom + i, top - (middle - bottom) + i);
+ }
+ /* Exclude the moved bottom segment from further swapping. */
+ top -= len;
+ }
+ else
+ {
+ /* Top segment is the short one. */
+ int len = top - middle;
+ register int i;
+
+ /* Swap it with the bottom part of the bottom segment. */
+ for (i = 0; i < len; i++)
+ {
+ tem = argv[bottom + i];
+ argv[bottom + i] = argv[middle + i];
+ argv[middle + i] = tem;
+ SWAP_FLAGS (bottom + i, middle + i);
+ }
+ /* Exclude the moved top segment from further swapping. */
+ bottom += len;
+ }
+ }
+
+ /* Update records for the slots the non-options now occupy. */
+
+ d->__first_nonopt += (d->optind - d->__last_nonopt);
+ d->__last_nonopt = d->optind;
+}
+
+/* Initialize the internal data when the first call is made. */
+
+static const char *
+_getopt_initialize (int argc, char **argv, const char *optstring,
+ int posixly_correct, struct _getopt_data *d)
+{
+ /* Start processing options with ARGV-element 1 (since ARGV-element 0
+ is the program name); the sequence of previously skipped
+ non-option ARGV-elements is empty. */
+
+ d->__first_nonopt = d->__last_nonopt = d->optind;
+
+ d->__nextchar = NULL;
+
+ d->__posixly_correct = posixly_correct || !!getenv ("POSIXLY_CORRECT");
+
+ /* Determine how to handle the ordering of options and nonoptions. */
+
+ if (optstring[0] == '-')
+ {
+ d->__ordering = RETURN_IN_ORDER;
+ ++optstring;
+ }
+ else if (optstring[0] == '+')
+ {
+ d->__ordering = REQUIRE_ORDER;
+ ++optstring;
+ }
+ else if (d->__posixly_correct)
+ d->__ordering = REQUIRE_ORDER;
+ else
+ d->__ordering = PERMUTE;
+
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+ if (!d->__posixly_correct
+ && argc == __libc_argc && argv == __libc_argv)
+ {
+ if (d->__nonoption_flags_max_len == 0)
+ {
+ if (__getopt_nonoption_flags == NULL
+ || __getopt_nonoption_flags[0] == '\0')
+ d->__nonoption_flags_max_len = -1;
+ else
+ {
+ const char *orig_str = __getopt_nonoption_flags;
+ int len = d->__nonoption_flags_max_len = strlen (orig_str);
+ if (d->__nonoption_flags_max_len < argc)
+ d->__nonoption_flags_max_len = argc;
+ __getopt_nonoption_flags =
+ (char *) malloc (d->__nonoption_flags_max_len);
+ if (__getopt_nonoption_flags == NULL)
+ d->__nonoption_flags_max_len = -1;
+ else
+ memset (__mempcpy (__getopt_nonoption_flags, orig_str, len),
+ '\0', d->__nonoption_flags_max_len - len);
+ }
+ }
+ d->__nonoption_flags_len = d->__nonoption_flags_max_len;
+ }
+ else
+ d->__nonoption_flags_len = 0;
+#endif
+
+ return optstring;
+}
+\f
+/* Scan elements of ARGV (whose length is ARGC) for option characters
+ given in OPTSTRING.
+
+ If an element of ARGV starts with '-', and is not exactly "-" or "--",
+ then it is an option element. The characters of this element
+ (aside from the initial '-') are option characters. If `getopt'
+ is called repeatedly, it returns successively each of the option characters
+ from each of the option elements.
+
+ If `getopt' finds another option character, it returns that character,
+ updating `optind' and `nextchar' so that the next call to `getopt' can
+ resume the scan with the following option character or ARGV-element.
+
+ If there are no more option characters, `getopt' returns -1.
+ Then `optind' is the index in ARGV of the first ARGV-element
+ that is not an option. (The ARGV-elements have been permuted
+ so that those that are not options now come last.)
+
+ OPTSTRING is a string containing the legitimate option characters.
+ If an option character is seen that is not listed in OPTSTRING,
+ return '?' after printing an error message. If you set `opterr' to
+ zero, the error message is suppressed but we still return '?'.
+
+ If a char in OPTSTRING is followed by a colon, that means it wants an arg,
+ so the following text in the same ARGV-element, or the text of the following
+ ARGV-element, is returned in `optarg'. Two colons mean an option that
+ wants an optional arg; if there is text in the current ARGV-element,
+ it is returned in `optarg', otherwise `optarg' is set to zero.
+
+ If OPTSTRING starts with `-' or `+', it requests different methods of
+ handling the non-option ARGV-elements.
+ See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above.
+
+ Long-named options begin with `--' instead of `-'.
+ Their names may be abbreviated as long as the abbreviation is unique
+ or is an exact match for some defined option. If they have an
+ argument, it follows the option name in the same ARGV-element, separated
+ from the option name by a `=', or else the in next ARGV-element.
+ When `getopt' finds a long-named option, it returns 0 if that option's
+ `flag' field is nonzero, the value of the option's `val' field
+ if the `flag' field is zero.
+
+ LONGOPTS is a vector of `struct option' terminated by an
+ element containing a name which is zero.
+
+ LONGIND returns the index in LONGOPT of the long-named option found.
+ It is only valid when a long-named option has been found by the most
+ recent call.
+
+ If LONG_ONLY is nonzero, '-' as well as '--' can introduce
+ long-named options.
+
+ If POSIXLY_CORRECT is nonzero, behave as if the POSIXLY_CORRECT
+ environment variable were set. */
+
+int
+_getopt_internal_r (int argc, char **argv, const char *optstring,
+ const struct option *longopts, int *longind,
+ int long_only, int posixly_correct, struct _getopt_data *d)
+{
+ int print_errors = d->opterr;
+ if (optstring[0] == ':')
+ print_errors = 0;
+
+ if (argc < 1)
+ return -1;
+
+ d->optarg = NULL;
+
+ if (d->optind == 0 || !d->__initialized)
+ {
+ if (d->optind == 0)
+ d->optind = 1; /* Don't scan ARGV[0], the program name. */
+ optstring = _getopt_initialize (argc, argv, optstring,
+ posixly_correct, d);
+ d->__initialized = 1;
+ }
+
+ /* Test whether ARGV[optind] points to a non-option argument.
+ Either it does not have option syntax, or there is an environment flag
+ from the shell indicating it is not an option. The later information
+ is only used when the used in the GNU libc. */
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+# define NONOPTION_P (argv[d->optind][0] != '-' || argv[d->optind][1] == '\0' \
+ || (d->optind < d->__nonoption_flags_len \
+ && __getopt_nonoption_flags[d->optind] == '1'))
+#else
+# define NONOPTION_P (argv[d->optind][0] != '-' || argv[d->optind][1] == '\0')
+#endif
+
+ if (d->__nextchar == NULL || *d->__nextchar == '\0')
+ {
+ /* Advance to the next ARGV-element. */
+
+ /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been
+ moved back by the user (who may also have changed the arguments). */
+ if (d->__last_nonopt > d->optind)
+ d->__last_nonopt = d->optind;
+ if (d->__first_nonopt > d->optind)
+ d->__first_nonopt = d->optind;
+
+ if (d->__ordering == PERMUTE)
+ {
+ /* If we have just processed some options following some non-options,
+ exchange them so that the options come first. */
+
+ if (d->__first_nonopt != d->__last_nonopt
+ && d->__last_nonopt != d->optind)
+ exchange ((char **) argv, d);
+ else if (d->__last_nonopt != d->optind)
+ d->__first_nonopt = d->optind;
+
+ /* Skip any additional non-options
+ and extend the range of non-options previously skipped. */
+
+ while (d->optind < argc && NONOPTION_P)
+ d->optind++;
+ d->__last_nonopt = d->optind;
+ }
+
+ /* The special ARGV-element `--' means premature end of options.
+ Skip it like a null option,
+ then exchange with previous non-options as if it were an option,
+ then skip everything else like a non-option. */
+
+ if (d->optind != argc && !strcmp (argv[d->optind], "--"))
+ {
+ d->optind++;
+
+ if (d->__first_nonopt != d->__last_nonopt
+ && d->__last_nonopt != d->optind)
+ exchange ((char **) argv, d);
+ else if (d->__first_nonopt == d->__last_nonopt)
+ d->__first_nonopt = d->optind;
+ d->__last_nonopt = argc;
+
+ d->optind = argc;
+ }
+
+ /* If we have done all the ARGV-elements, stop the scan
+ and back over any non-options that we skipped and permuted. */
+
+ if (d->optind == argc)
+ {
+ /* Set the next-arg-index to point at the non-options
+ that we previously skipped, so the caller will digest them. */
+ if (d->__first_nonopt != d->__last_nonopt)
+ d->optind = d->__first_nonopt;
+ return -1;
+ }
+
+ /* If we have come to a non-option and did not permute it,
+ either stop the scan or describe it to the caller and pass it by. */
+
+ if (NONOPTION_P)
+ {
+ if (d->__ordering == REQUIRE_ORDER)
+ return -1;
+ d->optarg = argv[d->optind++];
+ return 1;
+ }
+
+ /* We have found another option-ARGV-element.
+ Skip the initial punctuation. */
+
+ d->__nextchar = (argv[d->optind] + 1
+ + (longopts != NULL && argv[d->optind][1] == '-'));
+ }
+
+ /* Decode the current option-ARGV-element. */
+
+ /* Check whether the ARGV-element is a long option.
+
+ If long_only and the ARGV-element has the form "-f", where f is
+ a valid short option, don't consider it an abbreviated form of
+ a long option that starts with f. Otherwise there would be no
+ way to give the -f short option.
+
+ On the other hand, if there's a long option "fubar" and
+ the ARGV-element is "-fu", do consider that an abbreviation of
+ the long option, just like "--fu", and not "-f" with arg "u".
+
+ This distinction seems to be the most useful approach. */
+
+ if (longopts != NULL
+ && (argv[d->optind][1] == '-'
+ || (long_only && (argv[d->optind][2]
+ || !strchr (optstring, argv[d->optind][1])))))
+ {
+ char *nameend;
+ const struct option *p;
+ const struct option *pfound = NULL;
+ int exact = 0;
+ int ambig = 0;
+ int indfound = -1;
+ int option_index;
+
+ for (nameend = d->__nextchar; *nameend && *nameend != '='; nameend++)
+ /* Do nothing. */ ;
+
+ /* Test all long options for either exact match
+ or abbreviated matches. */
+ for (p = longopts, option_index = 0; p->name; p++, option_index++)
+ if (!strncmp (p->name, d->__nextchar, nameend - d->__nextchar))
+ {
+ if ((unsigned int) (nameend - d->__nextchar)
+ == (unsigned int) strlen (p->name))
+ {
+ /* Exact match found. */
+ pfound = p;
+ indfound = option_index;
+ exact = 1;
+ break;
+ }
+ else if (pfound == NULL)
+ {
+ /* First nonexact match found. */
+ pfound = p;
+ indfound = option_index;
+ }
+ else if (long_only
+ || pfound->has_arg != p->has_arg
+ || pfound->flag != p->flag
+ || pfound->val != p->val)
+ /* Second or later nonexact match found. */
+ ambig = 1;
+ }
+
+ if (ambig && !exact)
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf, _("%s: option `%s' is ambiguous\n"),
+ argv[0], argv[d->optind]) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr, _("%s: option `%s' is ambiguous\n"),
+ argv[0], argv[d->optind]);
+#endif
+ }
+ d->__nextchar += strlen (d->__nextchar);
+ d->optind++;
+ d->optopt = 0;
+ return '?';
+ }
+
+ if (pfound != NULL)
+ {
+ option_index = indfound;
+ d->optind++;
+ if (*nameend)
+ {
+ /* Don't test has_arg with >, because some C compilers don't
+ allow it to be used on enums. */
+ if (pfound->has_arg)
+ d->optarg = nameend + 1;
+ else
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+ int n;
+#endif
+
+ if (argv[d->optind - 1][1] == '-')
+ {
+ /* --option */
+#if defined _LIBC && defined USE_IN_LIBIO
+ n = __asprintf (&buf, _("\
+%s: option `--%s' doesn't allow an argument\n"),
+ argv[0], pfound->name);
+#else
+ fprintf (stderr, _("\
+%s: option `--%s' doesn't allow an argument\n"),
+ argv[0], pfound->name);
+#endif
+ }
+ else
+ {
+ /* +option or -option */
+#if defined _LIBC && defined USE_IN_LIBIO
+ n = __asprintf (&buf, _("\
+%s: option `%c%s' doesn't allow an argument\n"),
+ argv[0], argv[d->optind - 1][0],
+ pfound->name);
+#else
+ fprintf (stderr, _("\
+%s: option `%c%s' doesn't allow an argument\n"),
+ argv[0], argv[d->optind - 1][0],
+ pfound->name);
+#endif
+ }
+
+#if defined _LIBC && defined USE_IN_LIBIO
+ if (n >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2
+ |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#endif
+ }
+
+ d->__nextchar += strlen (d->__nextchar);
+
+ d->optopt = pfound->val;
+ return '?';
+ }
+ }
+ else if (pfound->has_arg == 1)
+ {
+ if (d->optind < argc)
+ d->optarg = argv[d->optind++];
+ else
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf, _("\
+%s: option `%s' requires an argument\n"),
+ argv[0], argv[d->optind - 1]) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2
+ |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr,
+ _("%s: option `%s' requires an argument\n"),
+ argv[0], argv[d->optind - 1]);
+#endif
+ }
+ d->__nextchar += strlen (d->__nextchar);
+ d->optopt = pfound->val;
+ return optstring[0] == ':' ? ':' : '?';
+ }
+ }
+ d->__nextchar += strlen (d->__nextchar);
+ if (longind != NULL)
+ *longind = option_index;
+ if (pfound->flag)
+ {
+ *(pfound->flag) = pfound->val;
+ return 0;
+ }
+ return pfound->val;
+ }
+
+ /* Can't find it as a long option. If this is not getopt_long_only,
+ or the option starts with '--' or is not a valid short
+ option, then it's an error.
+ Otherwise interpret it as a short option. */
+ if (!long_only || argv[d->optind][1] == '-'
+ || strchr (optstring, *d->__nextchar) == NULL)
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+ int n;
+#endif
+
+ if (argv[d->optind][1] == '-')
+ {
+ /* --option */
+#if defined _LIBC && defined USE_IN_LIBIO
+ n = __asprintf (&buf, _("%s: unrecognized option `--%s'\n"),
+ argv[0], d->__nextchar);
+#else
+ fprintf (stderr, _("%s: unrecognized option `--%s'\n"),
+ argv[0], d->__nextchar);
+#endif
+ }
+ else
+ {
+ /* +option or -option */
+#if defined _LIBC && defined USE_IN_LIBIO
+ n = __asprintf (&buf, _("%s: unrecognized option `%c%s'\n"),
+ argv[0], argv[d->optind][0], d->__nextchar);
+#else
+ fprintf (stderr, _("%s: unrecognized option `%c%s'\n"),
+ argv[0], argv[d->optind][0], d->__nextchar);
+#endif
+ }
+
+#if defined _LIBC && defined USE_IN_LIBIO
+ if (n >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#endif
+ }
+ d->__nextchar = (char *) "";
+ d->optind++;
+ d->optopt = 0;
+ return '?';
+ }
+ }
+
+ /* Look at and handle the next short option-character. */
+
+ {
+ char c = *d->__nextchar++;
+ char *temp = strchr (optstring, c);
+
+ /* Increment `optind' when we start to process its last character. */
+ if (*d->__nextchar == '\0')
+ ++d->optind;
+
+ if (temp == NULL || c == ':')
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+ int n;
+#endif
+
+ if (d->__posixly_correct)
+ {
+ /* 1003.2 specifies the format of this message. */
+#if defined _LIBC && defined USE_IN_LIBIO
+ n = __asprintf (&buf, _("%s: illegal option -- %c\n"),
+ argv[0], c);
+#else
+ fprintf (stderr, _("%s: illegal option -- %c\n"), argv[0], c);
+#endif
+ }
+ else
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ n = __asprintf (&buf, _("%s: invalid option -- %c\n"),
+ argv[0], c);
+#else
+ fprintf (stderr, _("%s: invalid option -- %c\n"), argv[0], c);
+#endif
+ }
+
+#if defined _LIBC && defined USE_IN_LIBIO
+ if (n >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#endif
+ }
+ d->optopt = c;
+ return '?';
+ }
+ /* Convenience. Treat POSIX -W foo same as long option --foo */
+ if (temp[0] == 'W' && temp[1] == ';')
+ {
+ char *nameend;
+ const struct option *p;
+ const struct option *pfound = NULL;
+ int exact = 0;
+ int ambig = 0;
+ int indfound = 0;
+ int option_index;
+
+ /* This is an option that requires an argument. */
+ if (*d->__nextchar != '\0')
+ {
+ d->optarg = d->__nextchar;
+ /* If we end this ARGV-element by taking the rest as an arg,
+ we must advance to the next element now. */
+ d->optind++;
+ }
+ else if (d->optind == argc)
+ {
+ if (print_errors)
+ {
+ /* 1003.2 specifies the format of this message. */
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf,
+ _("%s: option requires an argument -- %c\n"),
+ argv[0], c) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr, _("%s: option requires an argument -- %c\n"),
+ argv[0], c);
+#endif
+ }
+ d->optopt = c;
+ if (optstring[0] == ':')
+ c = ':';
+ else
+ c = '?';
+ return c;
+ }
+ else
+ /* We already incremented `d->optind' once;
+ increment it again when taking next ARGV-elt as argument. */
+ d->optarg = argv[d->optind++];
+
+ /* optarg is now the argument, see if it's in the
+ table of longopts. */
+
+ for (d->__nextchar = nameend = d->optarg; *nameend && *nameend != '=';
+ nameend++)
+ /* Do nothing. */ ;
+
+ /* Test all long options for either exact match
+ or abbreviated matches. */
+ for (p = longopts, option_index = 0; p->name; p++, option_index++)
+ if (!strncmp (p->name, d->__nextchar, nameend - d->__nextchar))
+ {
+ if ((unsigned int) (nameend - d->__nextchar) == strlen (p->name))
+ {
+ /* Exact match found. */
+ pfound = p;
+ indfound = option_index;
+ exact = 1;
+ break;
+ }
+ else if (pfound == NULL)
+ {
+ /* First nonexact match found. */
+ pfound = p;
+ indfound = option_index;
+ }
+ else
+ /* Second or later nonexact match found. */
+ ambig = 1;
+ }
+ if (ambig && !exact)
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf, _("%s: option `-W %s' is ambiguous\n"),
+ argv[0], argv[d->optind]) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"),
+ argv[0], argv[d->optind]);
+#endif
+ }
+ d->__nextchar += strlen (d->__nextchar);
+ d->optind++;
+ return '?';
+ }
+ if (pfound != NULL)
+ {
+ option_index = indfound;
+ if (*nameend)
+ {
+ /* Don't test has_arg with >, because some C compilers don't
+ allow it to be used on enums. */
+ if (pfound->has_arg)
+ d->optarg = nameend + 1;
+ else
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf, _("\
+%s: option `-W %s' doesn't allow an argument\n"),
+ argv[0], pfound->name) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2
+ |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr, _("\
+%s: option `-W %s' doesn't allow an argument\n"),
+ argv[0], pfound->name);
+#endif
+ }
+
+ d->__nextchar += strlen (d->__nextchar);
+ return '?';
+ }
+ }
+ else if (pfound->has_arg == 1)
+ {
+ if (d->optind < argc)
+ d->optarg = argv[d->optind++];
+ else
+ {
+ if (print_errors)
+ {
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf, _("\
+%s: option `%s' requires an argument\n"),
+ argv[0], argv[d->optind - 1]) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2
+ |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr,
+ _("%s: option `%s' requires an argument\n"),
+ argv[0], argv[d->optind - 1]);
+#endif
+ }
+ d->__nextchar += strlen (d->__nextchar);
+ return optstring[0] == ':' ? ':' : '?';
+ }
+ }
+ d->__nextchar += strlen (d->__nextchar);
+ if (longind != NULL)
+ *longind = option_index;
+ if (pfound->flag)
+ {
+ *(pfound->flag) = pfound->val;
+ return 0;
+ }
+ return pfound->val;
+ }
+ d->__nextchar = NULL;
+ return 'W'; /* Let the application handle it. */
+ }
+ if (temp[1] == ':')
+ {
+ if (temp[2] == ':')
+ {
+ /* This is an option that accepts an argument optionally. */
+ if (*d->__nextchar != '\0')
+ {
+ d->optarg = d->__nextchar;
+ d->optind++;
+ }
+ else
+ d->optarg = NULL;
+ d->__nextchar = NULL;
+ }
+ else
+ {
+ /* This is an option that requires an argument. */
+ if (*d->__nextchar != '\0')
+ {
+ d->optarg = d->__nextchar;
+ /* If we end this ARGV-element by taking the rest as an arg,
+ we must advance to the next element now. */
+ d->optind++;
+ }
+ else if (d->optind == argc)
+ {
+ if (print_errors)
+ {
+ /* 1003.2 specifies the format of this message. */
+#if defined _LIBC && defined USE_IN_LIBIO
+ char *buf;
+
+ if (__asprintf (&buf, _("\
+%s: option requires an argument -- %c\n"),
+ argv[0], c) >= 0)
+ {
+ _IO_flockfile (stderr);
+
+ int old_flags2 = ((_IO_FILE *) stderr)->_flags2;
+ ((_IO_FILE *) stderr)->_flags2 |= _IO_FLAGS2_NOTCANCEL;
+
+ __fxprintf (NULL, "%s", buf);
+
+ ((_IO_FILE *) stderr)->_flags2 = old_flags2;
+ _IO_funlockfile (stderr);
+
+ free (buf);
+ }
+#else
+ fprintf (stderr,
+ _("%s: option requires an argument -- %c\n"),
+ argv[0], c);
+#endif
+ }
+ d->optopt = c;
+ if (optstring[0] == ':')
+ c = ':';
+ else
+ c = '?';
+ }
+ else
+ /* We already incremented `optind' once;
+ increment it again when taking next ARGV-elt as argument. */
+ d->optarg = argv[d->optind++];
+ d->__nextchar = NULL;
+ }
+ }
+ return c;
+ }
+}
+
+int
+_getopt_internal (int argc, char **argv, const char *optstring,
+ const struct option *longopts, int *longind,
+ int long_only, int posixly_correct)
+{
+ int result;
+
+ getopt_data.optind = optind;
+ getopt_data.opterr = opterr;
+
+ result = _getopt_internal_r (argc, argv, optstring, longopts, longind,
+ long_only, posixly_correct, &getopt_data);
+
+ optind = getopt_data.optind;
+ optarg = getopt_data.optarg;
+ optopt = getopt_data.optopt;
+
+ return result;
+}
+
+/* glibc gets a LSB-compliant getopt.
+ Standalone applications get a POSIX-compliant getopt. */
+#if _LIBC
+enum { POSIXLY_CORRECT = 0 };
+#else
+enum { POSIXLY_CORRECT = 1 };
+#endif
+
+int
+getopt (int argc, char *const *argv, const char *optstring)
+{
+ return _getopt_internal (argc, (char **) argv, optstring, NULL, NULL, 0,
+ POSIXLY_CORRECT);
+}
+
+\f
+#ifdef TEST
+
+/* Compile with -DTEST to make an executable for use in testing
+ the above definition of `getopt'. */
+
+int
+main (int argc, char **argv)
+{
+ int c;
+ int digit_optind = 0;
+
+ while (1)
+ {
+ int this_option_optind = optind ? optind : 1;
+
+ c = getopt (argc, argv, "abc:d:0123456789");
+ if (c == -1)
+ break;
+
+ switch (c)
+ {
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ if (digit_optind != 0 && digit_optind != this_option_optind)
+ printf ("digits occur in two different argv-elements.\n");
+ digit_optind = this_option_optind;
+ printf ("option %c\n", c);
+ break;
+
+ case 'a':
+ printf ("option a\n");
+ break;
+
+ case 'b':
+ printf ("option b\n");
+ break;
+
+ case 'c':
+ printf ("option c with value `%s'\n", optarg);
+ break;
+
+ case '?':
+ break;
+
+ default:
+ printf ("?? getopt returned character code 0%o ??\n", c);
+ }
+ }
+
+ if (optind < argc)
+ {
+ printf ("non-option ARGV-elements: ");
+ while (optind < argc)
+ printf ("%s ", argv[optind++]);
+ printf ("\n");
+ }
+
+ exit (0);
+}
+
+#endif /* TEST */
--- /dev/null
+/* getopt_long and getopt_long_only entry points for GNU getopt.
+ Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98,2004,2006
+ Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+\f
+#ifdef _LIBC
+# include <getopt.h>
+#else
+# include <config.h>
+# include "getopt.h"
+#endif
+#include "getopt_int.h"
+
+#include <stdio.h>
+
+/* This needs to come after some library #include
+ to get __GNU_LIBRARY__ defined. */
+#ifdef __GNU_LIBRARY__
+#include <stdlib.h>
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+int
+getopt_long (int argc, char *__getopt_argv_const *argv, const char *options,
+ const struct option *long_options, int *opt_index)
+{
+ return _getopt_internal (argc, (char **) argv, options, long_options,
+ opt_index, 0, 0);
+}
+
+int
+_getopt_long_r (int argc, char **argv, const char *options,
+ const struct option *long_options, int *opt_index,
+ struct _getopt_data *d)
+{
+ return _getopt_internal_r (argc, argv, options, long_options, opt_index,
+ 0, 0, d);
+}
+
+/* Like getopt_long, but '-' as well as '--' can indicate a long option.
+ If an option that starts with '-' (not '--') doesn't match a long option,
+ but does match a short option, it is parsed as a short option
+ instead. */
+
+int
+getopt_long_only (int argc, char *__getopt_argv_const *argv,
+ const char *options,
+ const struct option *long_options, int *opt_index)
+{
+ return _getopt_internal (argc, (char **) argv, options, long_options,
+ opt_index, 1, 0);
+}
+
+int
+_getopt_long_only_r (int argc, char **argv, const char *options,
+ const struct option *long_options, int *opt_index,
+ struct _getopt_data *d)
+{
+ return _getopt_internal_r (argc, argv, options, long_options, opt_index,
+ 1, 0, d);
+}
+
+\f
+#ifdef TEST
+
+#include <stdio.h>
+
+int
+main (int argc, char **argv)
+{
+ int c;
+ int digit_optind = 0;
+
+ while (1)
+ {
+ int this_option_optind = optind ? optind : 1;
+ int option_index = 0;
+ static struct option long_options[] =
+ {
+ {"add", 1, 0, 0},
+ {"append", 0, 0, 0},
+ {"delete", 1, 0, 0},
+ {"verbose", 0, 0, 0},
+ {"create", 0, 0, 0},
+ {"file", 1, 0, 0},
+ {0, 0, 0, 0}
+ };
+
+ c = getopt_long (argc, argv, "abc:d:0123456789",
+ long_options, &option_index);
+ if (c == -1)
+ break;
+
+ switch (c)
+ {
+ case 0:
+ printf ("option %s", long_options[option_index].name);
+ if (optarg)
+ printf (" with arg %s", optarg);
+ printf ("\n");
+ break;
+
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ if (digit_optind != 0 && digit_optind != this_option_optind)
+ printf ("digits occur in two different argv-elements.\n");
+ digit_optind = this_option_optind;
+ printf ("option %c\n", c);
+ break;
+
+ case 'a':
+ printf ("option a\n");
+ break;
+
+ case 'b':
+ printf ("option b\n");
+ break;
+
+ case 'c':
+ printf ("option c with value `%s'\n", optarg);
+ break;
+
+ case 'd':
+ printf ("option d with value `%s'\n", optarg);
+ break;
+
+ case '?':
+ break;
+
+ default:
+ printf ("?? getopt returned character code 0%o ??\n", c);
+ }
+ }
+
+ if (optind < argc)
+ {
+ printf ("non-option ARGV-elements: ");
+ while (optind < argc)
+ printf ("%s ", argv[optind++]);
+ printf ("\n");
+ }
+
+ exit (0);
+}
+
+#endif /* TEST */
--- /dev/null
+/* Declarations for getopt.
+ Copyright (C) 1989-1994,1996-1999,2001,2003,2004,2005,2006
+ Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _GETOPT_H
+
+#ifndef __need_getopt
+# define _GETOPT_H 1
+#endif
+
+/* Standalone applications should #define __GETOPT_PREFIX to an
+ identifier that prefixes the external functions and variables
+ defined in this header. When this happens, include the
+ headers that might declare getopt so that they will not cause
+ confusion if included after this file. Then systematically rename
+ identifiers so that they do not collide with the system functions
+ and variables. Renaming avoids problems with some compilers and
+ linkers. */
+#if defined __GETOPT_PREFIX && !defined __need_getopt
+# include <stdlib.h>
+# include <stdio.h>
+# include <unistd.h>
+# undef __need_getopt
+# undef getopt
+# undef getopt_long
+# undef getopt_long_only
+# undef optarg
+# undef opterr
+# undef optind
+# undef optopt
+# define __GETOPT_CONCAT(x, y) x ## y
+# define __GETOPT_XCONCAT(x, y) __GETOPT_CONCAT (x, y)
+# define __GETOPT_ID(y) __GETOPT_XCONCAT (__GETOPT_PREFIX, y)
+# define getopt __GETOPT_ID (getopt)
+# define getopt_long __GETOPT_ID (getopt_long)
+# define getopt_long_only __GETOPT_ID (getopt_long_only)
+# define optarg __GETOPT_ID (optarg)
+# define opterr __GETOPT_ID (opterr)
+# define optind __GETOPT_ID (optind)
+# define optopt __GETOPT_ID (optopt)
+#endif
+
+/* Standalone applications get correct prototypes for getopt_long and
+ getopt_long_only; they declare "char **argv". libc uses prototypes
+ with "char *const *argv" that are incorrect because getopt_long and
+ getopt_long_only can permute argv; this is required for backward
+ compatibility (e.g., for LSB 2.0.1).
+
+ This used to be `#if defined __GETOPT_PREFIX && !defined __need_getopt',
+ but it caused redefinition warnings if both unistd.h and getopt.h were
+ included, since unistd.h includes getopt.h having previously defined
+ __need_getopt.
+
+ The only place where __getopt_argv_const is used is in definitions
+ of getopt_long and getopt_long_only below, but these are visible
+ only if __need_getopt is not defined, so it is quite safe to rewrite
+ the conditional as follows:
+*/
+#if !defined __need_getopt
+# if defined __GETOPT_PREFIX
+# define __getopt_argv_const /* empty */
+# else
+# define __getopt_argv_const const
+# endif
+#endif
+
+/* If __GNU_LIBRARY__ is not already defined, either we are being used
+ standalone, or this is the first header included in the source file.
+ If we are being used with glibc, we need to include <features.h>, but
+ that does not exist if we are standalone. So: if __GNU_LIBRARY__ is
+ not defined, include <ctype.h>, which will pull in <features.h> for us
+ if it's from glibc. (Why ctype.h? It's guaranteed to exist and it
+ doesn't flood the namespace with stuff the way some other headers do.) */
+#if !defined __GNU_LIBRARY__
+# include <ctype.h>
+#endif
+
+#ifndef __THROW
+# ifndef __GNUC_PREREQ
+# define __GNUC_PREREQ(maj, min) (0)
+# endif
+# if defined __cplusplus && __GNUC_PREREQ (2,8)
+# define __THROW throw ()
+# else
+# define __THROW
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* For communication from `getopt' to the caller.
+ When `getopt' finds an option that takes an argument,
+ the argument value is returned here.
+ Also, when `ordering' is RETURN_IN_ORDER,
+ each non-option ARGV-element is returned here. */
+
+extern char *optarg;
+
+/* Index in ARGV of the next element to be scanned.
+ This is used for communication to and from the caller
+ and for communication between successive calls to `getopt'.
+
+ On entry to `getopt', zero means this is the first call; initialize.
+
+ When `getopt' returns -1, this is the index of the first of the
+ non-option elements that the caller should itself scan.
+
+ Otherwise, `optind' communicates from one call to the next
+ how much of ARGV has been scanned so far. */
+
+extern int optind;
+
+/* Callers store zero here to inhibit the error message `getopt' prints
+ for unrecognized options. */
+
+extern int opterr;
+
+/* Set to an option character which was unrecognized. */
+
+extern int optopt;
+
+#ifndef __need_getopt
+/* Describe the long-named options requested by the application.
+ The LONG_OPTIONS argument to getopt_long or getopt_long_only is a vector
+ of `struct option' terminated by an element containing a name which is
+ zero.
+
+ The field `has_arg' is:
+ no_argument (or 0) if the option does not take an argument,
+ required_argument (or 1) if the option requires an argument,
+ optional_argument (or 2) if the option takes an optional argument.
+
+ If the field `flag' is not NULL, it points to a variable that is set
+ to the value given in the field `val' when the option is found, but
+ left unchanged if the option is not found.
+
+ To have a long-named option do something other than set an `int' to
+ a compiled-in constant, such as set a value from `optarg', set the
+ option's `flag' field to zero and its `val' field to a nonzero
+ value (the equivalent single-letter option character, if there is
+ one). For long options that have a zero `flag' field, `getopt'
+ returns the contents of the `val' field. */
+
+struct option
+{
+ const char *name;
+ /* has_arg can't be an enum because some compilers complain about
+ type mismatches in all the code that assumes it is an int. */
+ int has_arg;
+ int *flag;
+ int val;
+};
+
+/* Names for the values of the `has_arg' field of `struct option'. */
+
+# define no_argument 0
+# define required_argument 1
+# define optional_argument 2
+#endif /* need getopt */
+
+
+/* Get definitions and prototypes for functions to process the
+ arguments in ARGV (ARGC of them, minus the program name) for
+ options given in OPTS.
+
+ Return the option character from OPTS just read. Return -1 when
+ there are no more options. For unrecognized options, or options
+ missing arguments, `optopt' is set to the option letter, and '?' is
+ returned.
+
+ The OPTS string is a list of characters which are recognized option
+ letters, optionally followed by colons, specifying that that letter
+ takes an argument, to be placed in `optarg'.
+
+ If a letter in OPTS is followed by two colons, its argument is
+ optional. This behavior is specific to the GNU `getopt'.
+
+ The argument `--' causes premature termination of argument
+ scanning, explicitly telling `getopt' that there are no more
+ options.
+
+ If OPTS begins with `-', then non-option arguments are treated as
+ arguments to the option '\1'. This behavior is specific to the GNU
+ `getopt'. If OPTS begins with `+', or POSIXLY_CORRECT is set in
+ the environment, then do not permute arguments. */
+
+extern int getopt (int ___argc, char *const *___argv, const char *__shortopts)
+ __THROW;
+
+#ifndef __need_getopt
+extern int getopt_long (int ___argc, char *__getopt_argv_const *___argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind)
+ __THROW;
+extern int getopt_long_only (int ___argc, char *__getopt_argv_const *___argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind)
+ __THROW;
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Make sure we later can get all the definitions and declarations. */
+#undef __need_getopt
+
+#endif /* getopt.h */
--- /dev/null
+/* Internal declarations for getopt.
+ Copyright (C) 1989-1994,1996-1999,2001,2003,2004
+ Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _GETOPT_INT_H
+#define _GETOPT_INT_H 1
+
+extern int _getopt_internal (int ___argc, char **___argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind,
+ int __long_only, int __posixly_correct);
+
+\f
+/* Reentrant versions which can handle parsing multiple argument
+ vectors at the same time. */
+
+/* Data type for reentrant functions. */
+struct _getopt_data
+{
+ /* These have exactly the same meaning as the corresponding global
+ variables, except that they are used for the reentrant
+ versions of getopt. */
+ int optind;
+ int opterr;
+ int optopt;
+ char *optarg;
+
+ /* Internal members. */
+
+ /* True if the internal members have been initialized. */
+ int __initialized;
+
+ /* The next char to be scanned in the option-element
+ in which the last option character we returned was found.
+ This allows us to pick up the scan where we left off.
+
+ If this is zero, or a null string, it means resume the scan
+ by advancing to the next ARGV-element. */
+ char *__nextchar;
+
+ /* Describe how to deal with options that follow non-option ARGV-elements.
+
+ If the caller did not specify anything,
+ the default is REQUIRE_ORDER if the environment variable
+ POSIXLY_CORRECT is defined, PERMUTE otherwise.
+
+ REQUIRE_ORDER means don't recognize them as options;
+ stop option processing when the first non-option is seen.
+ This is what Unix does.
+ This mode of operation is selected by either setting the environment
+ variable POSIXLY_CORRECT, or using `+' as the first character
+ of the list of option characters, or by calling getopt.
+
+ PERMUTE is the default. We permute the contents of ARGV as we
+ scan, so that eventually all the non-options are at the end.
+ This allows options to be given in any order, even with programs
+ that were not written to expect this.
+
+ RETURN_IN_ORDER is an option available to programs that were
+ written to expect options and other ARGV-elements in any order
+ and that care about the ordering of the two. We describe each
+ non-option ARGV-element as if it were the argument of an option
+ with character code 1. Using `-' as the first character of the
+ list of option characters selects this mode of operation.
+
+ The special argument `--' forces an end of option-scanning regardless
+ of the value of `ordering'. In the case of RETURN_IN_ORDER, only
+ `--' can cause `getopt' to return -1 with `optind' != ARGC. */
+
+ enum
+ {
+ REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER
+ } __ordering;
+
+ /* If the POSIXLY_CORRECT environment variable is set
+ or getopt was called. */
+ int __posixly_correct;
+
+
+ /* Handle permutation of arguments. */
+
+ /* Describe the part of ARGV that contains non-options that have
+ been skipped. `first_nonopt' is the index in ARGV of the first
+ of them; `last_nonopt' is the index after the last of them. */
+
+ int __first_nonopt;
+ int __last_nonopt;
+
+#if defined _LIBC && defined USE_NONOPTION_FLAGS
+ int __nonoption_flags_max_len;
+ int __nonoption_flags_len;
+# endif
+};
+
+/* The initializer is necessary to set OPTIND and OPTERR to their
+ default values and to clear the initialization flag. */
+#define _GETOPT_DATA_INITIALIZER { 1, 1 }
+
+extern int _getopt_internal_r (int ___argc, char **___argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind,
+ int __long_only, int __posixly_correct,
+ struct _getopt_data *__data);
+
+extern int _getopt_long_r (int ___argc, char **___argv,
+ const char *__shortopts,
+ const struct option *__longopts, int *__longind,
+ struct _getopt_data *__data);
+
+extern int _getopt_long_only_r (int ___argc, char **___argv,
+ const char *__shortopts,
+ const struct option *__longopts,
+ int *__longind,
+ struct _getopt_data *__data);
+
+#endif /* getopt_int.h */
--- /dev/null
+/* Convenience header for conditional use of GNU <libintl.h>.
+ Copyright (C) 1995-1998, 2000-2002, 2004-2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
+
+/* NLS can be disabled through the configure --disable-nls option. */
+#if ENABLE_NLS
+
+/* Get declarations of GNU message catalog functions. */
+# include <libintl.h>
+
+/* You can set the DEFAULT_TEXT_DOMAIN macro to specify the domain used by
+ the gettext() and ngettext() macros. This is an alternative to calling
+ textdomain(), and is useful for libraries. */
+# ifdef DEFAULT_TEXT_DOMAIN
+# undef gettext
+# define gettext(Msgid) \
+ dgettext (DEFAULT_TEXT_DOMAIN, Msgid)
+# undef ngettext
+# define ngettext(Msgid1, Msgid2, N) \
+ dngettext (DEFAULT_TEXT_DOMAIN, Msgid1, Msgid2, N)
+# endif
+
+#else
+
+/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
+ chokes if dcgettext is defined as a macro. So include it now, to make
+ later inclusions of <locale.h> a NOP. We don't include <libintl.h>
+ as well because people using "gettext.h" will not include <libintl.h>,
+ and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
+ is OK. */
+#if defined(__sun)
+# include <locale.h>
+#endif
+
+/* Many header files from the libstdc++ coming with g++ 3.3 or newer include
+ <libintl.h>, which chokes if dcgettext is defined as a macro. So include
+ it now, to make later inclusions of <libintl.h> a NOP. */
+#if defined(__cplusplus) && defined(__GNUG__) && (__GNUC__ >= 3)
+# include <cstdlib>
+# if (__GLIBC__ >= 2) || _GLIBCXX_HAVE_LIBINTL_H
+# include <libintl.h>
+# endif
+#endif
+
+/* Disabled NLS.
+ The casts to 'const char *' serve the purpose of producing warnings
+ for invalid uses of the value returned from these functions.
+ On pre-ANSI systems without 'const', the config.h file is supposed to
+ contain "#define const". */
+# define gettext(Msgid) ((const char *) (Msgid))
+# define dgettext(Domainname, Msgid) ((void) (Domainname), gettext (Msgid))
+# define dcgettext(Domainname, Msgid, Category) \
+ ((void) (Category), dgettext (Domainname, Msgid))
+# define ngettext(Msgid1, Msgid2, N) \
+ ((N) == 1 \
+ ? ((void) (Msgid2), (const char *) (Msgid1)) \
+ : ((void) (Msgid1), (const char *) (Msgid2)))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+ ((void) (Domainname), ngettext (Msgid1, Msgid2, N))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+ ((void) (Category), dngettext(Domainname, Msgid1, Msgid2, N))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) \
+ ((void) (Domainname), (const char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) \
+ ((void) (Domainname), (const char *) (Codeset))
+
+#endif
+
+/* A pseudo function call that serves as a marker for the automated
+ extraction of messages, but does not call gettext(). The run-time
+ translation is done at a different place in the code.
+ The argument, String, should be a literal string. Concatenated strings
+ and other string expressions won't work.
+ The macro's expansion is not parenthesized, so that it is suitable as
+ initializer for static 'char[]' or 'const char[]' variables. */
+#define gettext_noop(String) String
+
+/* The separator between msgctxt and msgid in a .mo file. */
+#define GETTEXT_CONTEXT_GLUE "\004"
+
+/* Pseudo function calls, taking a MSGCTXT and a MSGID instead of just a
+ MSGID. MSGCTXT and MSGID must be string literals. MSGCTXT should be
+ short and rarely need to change.
+ The letter 'p' stands for 'particular' or 'special'. */
+#ifdef DEFAULT_TEXT_DOMAIN
+# define pgettext(Msgctxt, Msgid) \
+ pgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
+#else
+# define pgettext(Msgctxt, Msgid) \
+ pgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
+#endif
+#define dpgettext(Domainname, Msgctxt, Msgid) \
+ pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES)
+#define dcpgettext(Domainname, Msgctxt, Msgid, Category) \
+ pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, Category)
+#ifdef DEFAULT_TEXT_DOMAIN
+# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \
+ npgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
+#else
+# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \
+ npgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
+#endif
+#define dnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N) \
+ npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES)
+#define dcnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N, Category) \
+ npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, Category)
+
+#ifdef __GNUC__
+__inline
+#else
+#ifdef __cplusplus
+inline
+#endif
+#endif
+static const char *
+pgettext_aux (const char *domain,
+ const char *msg_ctxt_id, const char *msgid,
+ int category)
+{
+ const char *translation = dcgettext (domain, msg_ctxt_id, category);
+ if (translation == msg_ctxt_id)
+ return msgid;
+ else
+ return translation;
+}
+
+#ifdef __GNUC__
+__inline
+#else
+#ifdef __cplusplus
+inline
+#endif
+#endif
+static const char *
+npgettext_aux (const char *domain,
+ const char *msg_ctxt_id, const char *msgid,
+ const char *msgid_plural, unsigned long int n,
+ int category)
+{
+ const char *translation =
+ dcngettext (domain, msg_ctxt_id, msgid_plural, n, category);
+ if (translation == msg_ctxt_id || translation == msgid_plural)
+ return (n == 1 ? msgid : msgid_plural);
+ else
+ return translation;
+}
+
+/* The same thing extended for non-constant arguments. Here MSGCTXT and MSGID
+ can be arbitrary expressions. But for string literals these macros are
+ less efficient than those above. */
+
+#include <string.h>
+
+#define _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS \
+ (((__GNUC__ >= 3 || __GNUG__ >= 2) && !__STRICT_ANSI__) \
+ /* || __STDC_VERSION__ >= 199901L */ )
+
+#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
+#include <stdlib.h>
+#endif
+
+#define pgettext_expr(Msgctxt, Msgid) \
+ dcpgettext_expr (NULL, Msgctxt, Msgid, LC_MESSAGES)
+#define dpgettext_expr(Domainname, Msgctxt, Msgid) \
+ dcpgettext_expr (Domainname, Msgctxt, Msgid, LC_MESSAGES)
+
+#ifdef __GNUC__
+__inline
+#else
+#ifdef __cplusplus
+inline
+#endif
+#endif
+static const char *
+dcpgettext_expr (const char *domain,
+ const char *msgctxt, const char *msgid,
+ int category)
+{
+ size_t msgctxt_len = strlen (msgctxt) + 1;
+ size_t msgid_len = strlen (msgid) + 1;
+ const char *translation;
+#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
+ char msg_ctxt_id[msgctxt_len + msgid_len];
+#else
+ char buf[1024];
+ char *msg_ctxt_id =
+ (msgctxt_len + msgid_len <= sizeof (buf)
+ ? buf
+ : (char *) malloc (msgctxt_len + msgid_len));
+ if (msg_ctxt_id != NULL)
+#endif
+ {
+ memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1);
+ msg_ctxt_id[msgctxt_len - 1] = '\004';
+ memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len);
+ translation = dcgettext (domain, msg_ctxt_id, category);
+#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
+ if (msg_ctxt_id != buf)
+ free (msg_ctxt_id);
+#endif
+ if (translation != msg_ctxt_id)
+ return translation;
+ }
+ return msgid;
+}
+
+#define npgettext_expr(Msgctxt, Msgid, MsgidPlural, N) \
+ dcnpgettext_expr (NULL, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES)
+#define dnpgettext_expr(Domainname, Msgctxt, Msgid, MsgidPlural, N) \
+ dcnpgettext_expr (Domainname, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES)
+
+#ifdef __GNUC__
+__inline
+#else
+#ifdef __cplusplus
+inline
+#endif
+#endif
+static const char *
+dcnpgettext_expr (const char *domain,
+ const char *msgctxt, const char *msgid,
+ const char *msgid_plural, unsigned long int n,
+ int category)
+{
+ size_t msgctxt_len = strlen (msgctxt) + 1;
+ size_t msgid_len = strlen (msgid) + 1;
+ const char *translation;
+#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
+ char msg_ctxt_id[msgctxt_len + msgid_len];
+#else
+ char buf[1024];
+ char *msg_ctxt_id =
+ (msgctxt_len + msgid_len <= sizeof (buf)
+ ? buf
+ : (char *) malloc (msgctxt_len + msgid_len));
+ if (msg_ctxt_id != NULL)
+#endif
+ {
+ memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1);
+ msg_ctxt_id[msgctxt_len - 1] = '\004';
+ memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len);
+ translation = dcngettext (domain, msg_ctxt_id, msgid_plural, n, category);
+#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS
+ if (msg_ctxt_id != buf)
+ free (msg_ctxt_id);
+#endif
+ if (!(translation == msg_ctxt_id || translation == msgid_plural))
+ return translation;
+ }
+ return (n == 1 ? msgid : msgid_plural);
+}
+
+#endif /* _LIBGETTEXT_H */
--- /dev/null
+## DO NOT EDIT! GENERATED AUTOMATICALLY!
+## Process this file with automake to produce Makefile.in.
+# Copyright (C) 2004-2006 Free Software Foundation, Inc.
+#
+# This file is free software, distributed under the terms of the GNU
+# General Public License. As a special exception to the GNU General
+# Public License, this file may be distributed as part of a program
+# that contains a configuration script generated by Autoconf, under
+# the same distribution terms as the rest of that program.
+#
+# Generated by gnulib-tool.
+# Reproduce by: gnulib-tool --import --dir=. --local-dir=gl --lib=libgzip --source-base=.#bootmp/lib --m4-base=.#bootmp/m4 --doc-base=.#bootmp/doc --aux-dir=.#bootmp/build-aux --avoid=getline --avoid=rpmatch --no-libtool --macro-prefix=gl fcntl fcntl-safer fdl getopt stat-time sys_stat utimens xalloc yesno
+
+AUTOMAKE_OPTIONS = 1.5 gnits
+
+noinst_HEADERS =
+noinst_LIBRARIES =
+noinst_LTLIBRARIES =
+EXTRA_DIST =
+BUILT_SOURCES =
+SUFFIXES =
+MOSTLYCLEANFILES = core *.stackdump
+MOSTLYCLEANDIRS =
+CLEANFILES =
+DISTCLEANFILES =
+MAINTAINERCLEANFILES =
+
+AM_CPPFLAGS =
+
+noinst_LIBRARIES += libgzip.a
+
+libgzip_a_SOURCES =
+libgzip_a_LIBADD = $(gl_LIBOBJS)
+libgzip_a_DEPENDENCIES = $(gl_LIBOBJS)
+EXTRA_libgzip_a_SOURCES =
+
+## begin gnulib module error
+
+
+EXTRA_DIST += error.c error.h
+
+EXTRA_libgzip_a_SOURCES += error.c
+
+## end gnulib module error
+
+## begin gnulib module exit
+
+libgzip_a_SOURCES += exit.h
+
+## end gnulib module exit
+
+## begin gnulib module exitfail
+
+
+EXTRA_DIST += exitfail.c exitfail.h
+
+EXTRA_libgzip_a_SOURCES += exitfail.c
+
+## end gnulib module exitfail
+
+## begin gnulib module fcntl
+
+BUILT_SOURCES += $(FCNTL_H)
+
+# We need the following in order to create <fcntl.h> when the system
+# doesn't have one that works with the given compiler.
+fcntl.h: fcntl_.h
+ rm -f $@-t $@
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ sed -e 's|@''ABSOLUTE_FCNTL_H''@|$(ABSOLUTE_FCNTL_H)|g' \
+ < $(srcdir)/fcntl_.h; \
+ } > $@-t
+ mv $@-t $@
+MOSTLYCLEANFILES += fcntl.h fcntl.h-t
+
+EXTRA_DIST += fcntl_.h
+
+## end gnulib module fcntl
+
+## begin gnulib module fcntl-safer
+
+
+EXTRA_DIST += creat-safer.c fcntl--.h fcntl-safer.h open-safer.c
+
+EXTRA_libgzip_a_SOURCES += creat-safer.c open-safer.c
+
+## end gnulib module fcntl-safer
+
+## begin gnulib module getopt
+
+BUILT_SOURCES += $(GETOPT_H)
+
+# We need the following in order to create <getopt.h> when the system
+# doesn't have one that works with the given compiler.
+getopt.h: getopt_.h
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ cat $(srcdir)/getopt_.h; \
+ } > $@-t
+ mv -f $@-t $@
+MOSTLYCLEANFILES += getopt.h getopt.h-t
+
+EXTRA_DIST += getopt.c getopt1.c getopt_.h getopt_int.h
+
+EXTRA_libgzip_a_SOURCES += getopt.c getopt1.c
+
+## end gnulib module getopt
+
+## begin gnulib module gettext-h
+
+libgzip_a_SOURCES += gettext.h
+
+## end gnulib module gettext-h
+
+## begin gnulib module stat-time
+
+
+EXTRA_DIST += stat-time.h
+
+## end gnulib module stat-time
+
+## begin gnulib module stdbool
+
+BUILT_SOURCES += $(STDBOOL_H)
+
+# We need the following in order to create <stdbool.h> when the system
+# doesn't have one that works.
+stdbool.h: stdbool_.h
+ rm -f $@-t $@
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(srcdir)/stdbool_.h; \
+ } > $@-t
+ mv $@-t $@
+MOSTLYCLEANFILES += stdbool.h stdbool.h-t
+
+EXTRA_DIST += stdbool_.h
+
+## end gnulib module stdbool
+
+## begin gnulib module sys_stat
+
+BUILT_SOURCES += $(SYS_STAT_H)
+
+# We need the following in order to create <sys/stat.h> when the system
+# has one that is incomplete.
+sys/stat.h: stat_.h
+ test -d sys || mkdir sys
+ rm -f $@-t $@
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ sed -e 's|@''ABSOLUTE_SYS_STAT_H''@|$(ABSOLUTE_SYS_STAT_H)|g' \
+ < $(srcdir)/stat_.h; \
+ } > $@-t
+ mv $@-t $@
+MOSTLYCLEANFILES += sys/stat.h sys/stat.h-t
+MOSTLYCLEANDIRS += sys
+
+EXTRA_DIST += stat_.h
+
+## end gnulib module sys_stat
+
+## begin gnulib module timespec
+
+
+EXTRA_DIST += timespec.h
+
+## end gnulib module timespec
+
+## begin gnulib module unistd
+
+BUILT_SOURCES += $(UNISTD_H)
+
+# We need the following in order to create an empty placeholder for
+# <unistd.h> when the system doesn't have one.
+unistd.h:
+ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
+ echo '/* Empty placeholder for $@. */'; \
+ } > $@
+MOSTLYCLEANFILES += unistd.h
+
+## end gnulib module unistd
+
+## begin gnulib module unistd-safer
+
+
+EXTRA_DIST += dup-safer.c fd-safer.c pipe-safer.c unistd--.h unistd-safer.h
+
+EXTRA_libgzip_a_SOURCES += dup-safer.c fd-safer.c pipe-safer.c
+
+## end gnulib module unistd-safer
+
+## begin gnulib module utimens
+
+
+EXTRA_DIST += utimens.c utimens.h
+
+EXTRA_libgzip_a_SOURCES += utimens.c
+
+## end gnulib module utimens
+
+## begin gnulib module xalloc
+
+
+EXTRA_DIST += xalloc.h xmalloc.c
+
+EXTRA_libgzip_a_SOURCES += xmalloc.c
+
+## end gnulib module xalloc
+
+## begin gnulib module xalloc-die
+
+libgzip_a_SOURCES += xalloc-die.c
+
+## end gnulib module xalloc-die
+
+## begin gnulib module yesno
+
+
+EXTRA_DIST += yesno.c yesno.h
+
+EXTRA_libgzip_a_SOURCES += yesno.c
+
+## end gnulib module yesno
+
+
+mostlyclean-local: mostlyclean-generic
+ @for dir in '' $(MOSTLYCLEANDIRS); do \
+ if test -n "$$dir" && test -d $$dir; then \
+ echo "rmdir $$dir"; rmdir $$dir; \
+ fi; \
+ done
--- /dev/null
+/* match.s -- optional optimized asm version of longest match in deflate.c
+
+ Copyright (C) 2002, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/*
+ * The 68020 version has been written by Francesco Potorti` <pot@cnuce.cnr.it>
+ * with adaptations by Carsten Steger <stegerc@informatik.tu-muenchen.de>,
+ * Andreas Schwab <schwab@lamothe.informatik.uni-dortmund.de> and
+ * Kristoffer Eriksson <ske@pkmab.se>
+ *
+ * The ia64 version has been written by Sverre Jarp (HP Labs) 2001-2002.
+ * Unwind directives and some reformatting for better readability added by
+ * David Mosberger-Tang <davidm@hpl.hp.com>.
+ */
+
+/* $Id: match.c,v 1.1 2006/11/20 08:40:34 eggert Exp $ */
+
+/* Preprocess with -DNO_UNDERLINE if your C compiler does not prefix
+ * external symbols with an underline character '_'.
+ */
+#ifdef NO_UNDERLINE
+# define _prev prev
+# define _window window
+# define _match_start match_start
+# define _prev_length prev_length
+# define _good_match good_match
+# define _nice_match nice_match
+# define _strstart strstart
+# define _max_chain_length max_chain_length
+
+# define _match_init match_init
+# define _longest_match longest_match
+#endif
+
+#ifdef DYN_ALLOC
+ error: DYN_ALLOC not yet supported in match.s
+#endif
+
+#if defined(i386) || defined(_I386) || defined(__i386) || defined(__i386__)
+
+/* This version is for 386 Unix or OS/2 in 32 bit mode.
+ * Warning: it uses the AT&T syntax: mov source,dest
+ * This file is only optional. If you want to force the C version,
+ * add -DNO_ASM to CFLAGS in Makefile and set OBJA to an empty string.
+ * If you have reduced WSIZE in gzip.h, then change its value below.
+ * This version assumes static allocation of the arrays (-DDYN_ALLOC not used).
+ */
+
+ .file "match.S"
+
+#define MAX_MATCH 258
+#define MAX_MATCH2 $128 /* MAX_MATCH/2-1 */
+#define MIN_MATCH 3
+#define WSIZE $32768
+#define MAX_DIST WSIZE - MAX_MATCH - MIN_MATCH - 1
+
+ .globl _match_init
+ .globl _longest_match
+
+ .text
+
+_match_init:
+ ret
+
+/*-----------------------------------------------------------------------
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ */
+
+_longest_match: /* int longest_match(cur_match) */
+
+#define cur_match 20(%esp)
+ /* return address */ /* esp+16 */
+ push %ebp /* esp+12 */
+ push %edi /* esp+8 */
+ push %esi /* esp+4 */
+ push %ebx /* esp */
+
+/*
+ * match equ esi
+ * scan equ edi
+ * chain_length equ ebp
+ * best_len equ ebx
+ * limit equ edx
+ */
+ mov cur_match,%esi
+ mov _max_chain_length,%ebp /* chain_length = max_chain_length */
+ mov _strstart,%edi
+ mov %edi,%edx
+ sub MAX_DIST,%edx /* limit = strstart-MAX_DIST */
+ jae limit_ok
+ sub %edx,%edx /* limit = NIL */
+limit_ok:
+ add $2+_window,%edi /* edi = offset(window+strstart+2) */
+ mov _prev_length,%ebx /* best_len = prev_length */
+ movw -3(%ebx,%edi),%ax /* ax = scan[best_len-1..best_len] */
+ movw -2(%edi),%cx /* cx = scan[0..1] */
+ cmp _good_match,%ebx /* do we have a good match already? */
+ jb do_scan
+ shr $2,%ebp /* chain_length >>= 2 */
+ jmp do_scan
+
+ .align 4
+long_loop:
+/* at this point, edi == scan+2, esi == cur_match */
+ movw -3(%ebx,%edi),%ax /* ax = scan[best_len-1..best_len] */
+ movw -2(%edi),%cx /* cx = scan[0..1] */
+short_loop:
+/*
+ * at this point, di == scan+2, si == cur_match,
+ * ax = scan[best_len-1..best_len] and cx = scan[0..1]
+ */
+ and WSIZE-1, %esi
+ movw _prev(%esi,%esi),%si /* cur_match = prev[cur_match] */
+ /* top word of esi is still 0 */
+ cmp %edx,%esi /* cur_match <= limit ? */
+ jbe the_end
+ dec %ebp /* --chain_length */
+ jz the_end
+do_scan:
+ cmpw _window-1(%ebx,%esi),%ax/* check match at best_len-1 */
+ jne short_loop
+ cmpw _window(%esi),%cx /* check min_match_length match */
+ jne short_loop
+
+ lea _window+2(%esi),%esi /* si = match */
+ mov %edi,%eax /* ax = scan+2 */
+ mov MAX_MATCH2,%ecx /* scan for at most MAX_MATCH bytes */
+ rep; cmpsw /* loop until mismatch */
+ je maxmatch /* match of length MAX_MATCH? */
+mismatch:
+ movb -2(%edi),%cl /* mismatch on first or second byte? */
+ subb -2(%esi),%cl /* cl = 0 if first bytes equal */
+ xchg %edi,%eax /* edi = scan+2, eax = end of scan */
+ sub %edi,%eax /* eax = len */
+ sub %eax,%esi /* esi = cur_match + 2 + offset(window) */
+ sub $2+_window,%esi /* esi = cur_match */
+ subb $1,%cl /* set carry if cl == 0 (cannot use DEC) */
+ adc $0,%eax /* eax = carry ? len+1 : len */
+ cmp %ebx,%eax /* len > best_len ? */
+ jle long_loop
+ mov %esi,_match_start /* match_start = cur_match */
+ mov %eax,%ebx /* ebx = best_len = len */
+ cmp _nice_match,%eax /* len >= nice_match ? */
+ jl long_loop
+the_end:
+ mov %ebx,%eax /* result = eax = best_len */
+ pop %ebx
+ pop %esi
+ pop %edi
+ pop %ebp
+ ret
+maxmatch:
+ cmpsb
+ jmp mismatch
+
+#else
+
+/* ======================== 680x0 version ================================= */
+
+#if defined(m68k)||defined(mc68k)||defined(__mc68000__)||defined(__MC68000__)
+# ifndef mc68000
+# define mc68000
+# endif
+#endif
+
+#if defined(__mc68020__) || defined(__MC68020__) || defined(sysV68)
+# ifndef mc68020
+# define mc68020
+# endif
+#endif
+
+#if defined(mc68020) || defined(mc68000)
+
+#if (defined(mc68020) || defined(NeXT)) && !defined(UNALIGNED_OK)
+# define UNALIGNED_OK
+#endif
+
+#ifdef sysV68 /* Try Motorola Delta style */
+
+# define GLOBAL(symbol) global symbol
+# define TEXT text
+# define FILE(filename) file filename
+# define invert_maybe(src,dst) dst,src
+# define imm(data) &data
+# define reg(register) %register
+
+# define addl add.l
+# define addql addq.l
+# define blos blo.b
+# define bhis bhi.b
+# define bras bra.b
+# define clrl clr.l
+# define cmpmb cmpm.b
+# define cmpw cmp.w
+# define cmpl cmp.l
+# define lslw lsl.w
+# define lsrl lsr.l
+# define movel move.l
+# define movew move.w
+# define moveb move.b
+# define moveml movem.l
+# define subl sub.l
+# define subw sub.w
+# define subql subq.l
+
+# define IndBase(bd,An) (bd,An)
+# define IndBaseNdxl(bd,An,Xn) (bd,An,Xn.l)
+# define IndBaseNdxw(bd,An,Xn) (bd,An,Xn.w)
+# define predec(An) -(An)
+# define postinc(An) (An)+
+
+#else /* default style (Sun 3, NeXT, Amiga, Atari) */
+
+# define GLOBAL(symbol) .globl symbol
+# define TEXT .text
+# define FILE(filename) .even
+# define invert_maybe(src,dst) src,dst
+# if defined(sun) || defined(mc68k)
+# define imm(data) #data
+# else
+# define imm(data) \#data
+# endif
+# define reg(register) register
+
+# define blos bcss
+# if defined(sun) || defined(mc68k)
+# define movel movl
+# define movew movw
+# define moveb movb
+# endif
+# define IndBase(bd,An) An@(bd)
+# define IndBaseNdxl(bd,An,Xn) An@(bd,Xn:l)
+# define IndBaseNdxw(bd,An,Xn) An@(bd,Xn:w)
+# define predec(An) An@-
+# define postinc(An) An@+
+
+#endif /* styles */
+
+#define Best_Len reg(d0) /* unsigned */
+#define Cur_Match reg(d1) /* Ipos */
+#define Loop_Counter reg(d2) /* int */
+#define Scan_Start reg(d3) /* unsigned short */
+#define Scan_End reg(d4) /* unsigned short */
+#define Limit reg(d5) /* IPos */
+#define Chain_Length reg(d6) /* unsigned */
+#define Scan_Test reg(d7)
+#define Scan reg(a0) /* *uch */
+#define Match reg(a1) /* *uch */
+#define Prev_Address reg(a2) /* *Pos */
+#define Scan_Ini reg(a3) /* *uch */
+#define Match_Ini reg(a4) /* *uch */
+#define Stack_Pointer reg(sp)
+
+#define MAX_MATCH 258
+#define MIN_MATCH 3
+#define WSIZE 32768
+#define MAX_DIST (WSIZE - MAX_MATCH - MIN_MATCH - 1)
+
+ GLOBAL (_match_init)
+ GLOBAL (_longest_match)
+
+ TEXT
+
+ FILE ("match.S")
+
+_match_init:
+ rts
+
+/*-----------------------------------------------------------------------
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ */
+
+/* int longest_match (cur_match) */
+
+#ifdef UNALIGNED_OK
+# define pushreg 15928 /* d2-d6/a2-a4 */
+# define popreg 7292
+#else
+# define pushreg 16184 /* d2-d7/a2-a4 */
+# define popreg 7420
+#endif
+
+_longest_match:
+ movel IndBase(4,Stack_Pointer),Cur_Match
+ moveml imm(pushreg),predec(Stack_Pointer)
+ movel _max_chain_length,Chain_Length
+ movel _prev_length,Best_Len
+ movel imm(_prev),Prev_Address
+ movel imm(_window+MIN_MATCH),Match_Ini
+ movel _strstart,Limit
+ movel Match_Ini,Scan_Ini
+ addl Limit,Scan_Ini
+ subw imm(MAX_DIST),Limit
+ bhis L__limit_ok
+ clrl Limit
+L__limit_ok:
+ cmpl invert_maybe(_good_match,Best_Len)
+ blos L__length_ok
+ lsrl imm(2),Chain_Length
+L__length_ok:
+ subql imm(1),Chain_Length
+#ifdef UNALIGNED_OK
+ movew IndBase(-MIN_MATCH,Scan_Ini),Scan_Start
+ movew IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
+#else
+ moveb IndBase(-MIN_MATCH,Scan_Ini),Scan_Start
+ lslw imm(8),Scan_Start
+ moveb IndBase(-MIN_MATCH+1,Scan_Ini),Scan_Start
+ moveb IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
+ lslw imm(8),Scan_End
+ moveb IndBaseNdxw(-MIN_MATCH,Scan_Ini,Best_Len),Scan_End
+#endif
+ bras L__do_scan
+
+L__long_loop:
+#ifdef UNALIGNED_OK
+ movew IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
+#else
+ moveb IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
+ lslw imm(8),Scan_End
+ moveb IndBaseNdxw(-MIN_MATCH,Scan_Ini,Best_Len),Scan_End
+#endif
+
+L__short_loop:
+ lslw imm(1),Cur_Match
+ movew IndBaseNdxl(0,Prev_Address,Cur_Match),Cur_Match
+ cmpw invert_maybe(Limit,Cur_Match)
+ dbls Chain_Length,L__do_scan
+ bras L__return
+
+L__do_scan:
+ movel Match_Ini,Match
+ addl Cur_Match,Match
+#ifdef UNALIGNED_OK
+ cmpw invert_maybe(IndBaseNdxw(-MIN_MATCH-1,Match,Best_Len),Scan_End)
+ bne L__short_loop
+ cmpw invert_maybe(IndBase(-MIN_MATCH,Match),Scan_Start)
+ bne L__short_loop
+#else
+ moveb IndBaseNdxw(-MIN_MATCH-1,Match,Best_Len),Scan_Test
+ lslw imm(8),Scan_Test
+ moveb IndBaseNdxw(-MIN_MATCH,Match,Best_Len),Scan_Test
+ cmpw invert_maybe(Scan_Test,Scan_End)
+ bne L__short_loop
+ moveb IndBase(-MIN_MATCH,Match),Scan_Test
+ lslw imm(8),Scan_Test
+ moveb IndBase(-MIN_MATCH+1,Match),Scan_Test
+ cmpw invert_maybe(Scan_Test,Scan_Start)
+ bne L__short_loop
+#endif
+
+ movew imm((MAX_MATCH-MIN_MATCH+1)-1),Loop_Counter
+ movel Scan_Ini,Scan
+L__scan_loop:
+ cmpmb postinc(Match),postinc(Scan)
+ dbne Loop_Counter,L__scan_loop
+
+ subl Scan_Ini,Scan
+ addql imm(MIN_MATCH-1),Scan
+ cmpl invert_maybe(Best_Len,Scan)
+ bls L__short_loop
+ movel Scan,Best_Len
+ movel Cur_Match,_match_start
+ cmpl invert_maybe(_nice_match,Best_Len)
+ blos L__long_loop
+L__return:
+ moveml postinc(Stack_Pointer),imm(popreg)
+ rts
+
+#else
+
+# if defined (__ia64__)
+
+/* ======================== ia64 version ================================= */
+
+/*
+ * 'longest_match.S' (assembly program for gzip for the IA-64 architecture)
+ *
+ * Optimised for McKinley, but with Merced-compatibility, such as MIB+MIB, used wherever
+ * possible.
+ *
+ * Copyright: Sverre Jarp (HP Labs) 2001-2002
+ *
+ * See deflate.c for c-version
+ * Version 2 - Optimize the outer loop
+ */
+
+#include <endian.h>
+
+#if __BYTE_ORDER == ____BIG_ENDIAN
+#define first shl
+#define second shr.u
+#define count czx1.l
+#else
+#define first shr.u
+#define second shl
+#define count czx1.r
+#endif
+
+// 24 rotating register (r32 - r55)
+
+#define s_vmatch0 r32
+#define s_vmatch1 r33
+#define s_vmatbst r34
+#define s_vmatbst1 r35
+#define s_amatblen r36
+
+#define s_tm1 r56
+#define s_tm2 r57
+#define s_tm3 r58
+#define s_tm4 r59
+#define s_tm5 r60
+#define s_tm6 r61
+#define s_tm7 r62
+#define s_tm8 r63
+
+#define s_vlen r31
+#define s_vstrstart r30
+#define s_vchainlen r29
+#define s_awinbest r28
+#define s_vcurmatch r27
+#define s_vlimit r26
+#define s_vscanend r25
+#define s_vscanend1 r24
+#define s_anicematch r23
+#define s_vscan0 r22
+#define s_vscan1 r21
+
+#define s_aprev r20
+#define s_awindow r19
+#define s_amatchstart r18
+#define s_ascan r17
+#define s_amatch r16
+#define s_wmask r15
+#define s_ascanend r14
+
+#define s_vspec_cmatch r11 // next iteration
+#define s_lcsave r10
+#define s_prsave r9
+#define s_vbestlen r8 // return register
+
+#define s_vscan3 r3
+#define s_vmatch3 r2
+
+#define p_no p2
+#define p_yes p3
+#define p_shf p4 //
+#define p_bn2 p5 // Use in loop (indicating bestlen != 2)
+
+#define p_nbs p9 // not new best_len
+#define p_nnc p10 // not nice_length
+#define p_ll p11
+#define p_end p12
+
+#define MAX_MATCH 258
+#define MIN_MATCH 4
+#define WSIZE 32768
+#define MAX_DIST WSIZE - MAX_MATCH - MIN_MATCH - 1
+
+#define R_INPUT 1
+#define R_LOCAL 31
+#define R_OUTPUT 0
+#define R_ROTATING 24
+#define MLAT 3
+#define SHLAT 2
+
+#define mova mov
+#define movi0 mov
+#define cgtu cmp.gt.unc
+#define cgeu cmp.ge.unc
+#define cneu cmp.ne.unc
+
+ .global longest_match
+ .proc longest_match
+ .align 32
+longest_match:
+// -- Cycle: 0
+ .prologue
+{.mmi
+ alloc r2=ar.pfs,R_INPUT,R_LOCAL,R_OUTPUT,R_ROTATING
+ .rotr scan[MLAT+2], match[MLAT+2], shscan0[SHLAT+1], \
+ shscan1[SHLAT+1], shmatch0[SHLAT+1], shmatch1[SHLAT+1]
+ .rotp lc[MLAT+SHLAT+2]
+ mova s_vspec_cmatch=in0 // cur_match from input register
+ add s_tm1=@gprel(strstart),gp // a(a(strstart))
+}{.mmi
+ add s_tm3=@gprel(prev_length),gp // a(a(prev_length))
+ add s_tm5=@ltoff(window),gp // a(a(window))
+ add s_tm6=@ltoff(prev),gp // a(a(prev))
+ ;;
+}{.mmb // Cycle: 1
+ ld4 s_vstrstart=[s_tm1] // strstart
+ ld4 s_vbestlen=[s_tm3] // best_len = prev_length
+ brp.loop.imp .cmploop,.cmploop+48
+}{.mli
+ add s_tm2=@gprel(max_chain_length),gp // a(a(max_chain_length))
+ movl s_wmask=WSIZE-1
+ ;;
+}{.mmi // Cycle: 2
+ ld8 s_aprev=[s_tm6] // a(prev)
+ ld8 s_awindow=[s_tm5] // a(window)
+ .save pr, s_prsave
+ movi0 s_prsave=pr // save predicates
+}{.mmi
+ add s_tm4=@gprel(good_match),gp // a(a(good_match))
+ add s_tm7=@ltoff(nice_match),gp // a(a(nice_match))
+ add s_tm8=@ltoff(match_start),gp // a(match_start)
+ ;;
+}{.mmi // Cycle: 3
+ ld8 s_anicematch=[s_tm7] // a(nice_match)
+ ld8 s_amatchstart=[s_tm8] // a(match_start)
+ .save ar.lc, s_lcsave
+ movi0 s_lcsave=ar.lc // save loop count register
+}{.mmi
+ .body
+ add s_tm1=-(MAX_MATCH + MIN_MATCH),s_wmask // maxdist
+ cmp.eq p_ll,p0=r0,r0 // parallel compare initialized as 'true'
+ mova s_vcurmatch=s_vspec_cmatch
+ ;;
+}{.mmi // Cycle: 4
+ ld4 s_vchainlen=[s_tm2] // chain_length=max_chain_length
+ ld4 s_tm4=[s_tm4] // v(good_match)
+ add s_ascan=s_awindow,s_vstrstart // scan=window + strstart
+}{.mmi
+ sub s_vlimit=s_vstrstart, s_tm1 // limit=strstart - MAX_DIST
+ add s_amatch=s_awindow,s_vspec_cmatch // match=window + cur_match
+ and s_vspec_cmatch =s_vspec_cmatch,s_wmask
+ ;;
+}{.mmi // Cycle: 5
+ add s_amatblen=s_amatch,s_vbestlen //
+ cneu p_bn2,p0=2,s_vbestlen // set if bestlen != 2
+ add s_ascanend=s_ascan,s_vbestlen // compute a(scan) + best_len
+}{.mmi
+ ld1 s_vscan0=[s_ascan],1 // NB: s_ascan++
+ ld1 s_vmatch0=[s_amatch],1
+ cgtu p0,p_no=s_vlimit,r0 // is result positive ?
+ ;;
+}{.mmi // Cycle: 6
+ ld1.nt1 s_vscan1=[s_ascan],2 // NB: s_ascan+3 in total
+ ld1.nt1 s_vmatch1=[s_amatch],2
+ add s_awinbest=s_awindow,s_vbestlen //
+ ;;
+}{.mmi // Cycle: 7
+ ld1.nt1 s_vscanend=[s_ascanend],-1 // scan_end=scan[best_len]
+ ld1.nt1 s_vmatbst=[s_amatblen],-1
+(p_no) mova s_vlimit=r0
+ ;;
+}{.mmi // Cycle: 8
+(p_bn2) ld1.nt1 s_vscanend1=[s_ascanend],1 // scan_end1=scan[best_len-1]
+(p_bn2) ld1.nt1 s_vmatbst1=[s_amatblen]
+ shladd s_vspec_cmatch =s_vspec_cmatch,1,s_aprev
+}{.mmi
+ cgeu p_shf,p0=s_vbestlen,s_tm4 // is (prev_length >= good_match) ?
+ ;;
+}{.mmi // Cycle: 9
+ ld1.nt1 s_vscan3=[s_ascan]
+ ld2.nt1 s_vspec_cmatch=[s_vspec_cmatch]
+ mova s_vlen=3
+}{.mmi
+(p_shf) shr.u s_vchainlen=s_vchainlen,2 // (cur_len) >> 2
+ ;;
+}{.mmi // Cycle: 10
+ ld1.nt1 s_vmatch3=[s_amatch]
+ // p_ll switched on as soon as we get a mismatch:
+ cmp.eq.and p_ll,p0=s_vmatch0,s_vscan0
+ cmp.eq.and p_ll,p0=s_vmatbst,s_vscanend
+}{.mib
+ cmp.eq.and p_ll,p0=s_vmatch1,s_vscan1
+(p_bn2) cmp.eq.and p_ll,p0=s_vmatbst1,s_vscanend1
+(p_ll) br.cond.dpnt.many .test_more
+ ;;
+}
+
+.next_iter:
+{.mmi // Cycle 0
+ add s_amatch=s_awindow,s_vspec_cmatch // match=window + cur_match
+ mov s_vcurmatch=s_vspec_cmatch // current value
+ add s_vchainlen=-1,s_vchainlen // --chain_length
+}{.mib
+ cmp.le.unc p_end,p0=s_vspec_cmatch,s_vlimit
+ and s_vspec_cmatch=s_vspec_cmatch,s_wmask
+(p_end) br.cond.dptk.many .terminate
+ ;;
+}{.mmi // Cycle 1
+ ld1 s_vmatch0=[s_amatch],1 // load match[0]
+ // compute prev[cur_match]:
+ shladd s_vspec_cmatch=s_vspec_cmatch,1,s_aprev
+ cmp.eq.unc p_end,p0=s_vchainlen,r0
+} {.mib
+ nop.m 0
+ add s_amatblen=s_awinbest,s_vcurmatch // match=window + cur_match
+(p_end) br.cond.dptk.many .terminate
+ ;;
+}{.mmi // Cycle 2 (short)
+ ld2.nt1 s_vspec_cmatch=[s_vspec_cmatch] // get next cur_match
+ ;;
+}{.mmi // Cycle 3 (short)
+ ld1.nt1 s_vmatbst=[s_amatblen],-1 // load match[best_len]
+ cmp.ne.unc p_ll,p0=r0,r0 // parallel compare initialized as 'false'
+ ;;
+}{.mmi // Cycle 4 (short)
+ // load match[1] - - note: match += 3 (in total):
+ ld1.nt1 s_vmatch1=[s_amatch],2
+ ;;
+ // Cycle 5 (short)
+(p_bn2) ld1.nt1 s_vmatbst1=[s_amatblen] // load match[best_len-1]
+}{.mib // Here we (MOST LIKELY) pay a L2-fetch stall
+ // p_ll switched on as soon as we get a mismatch:
+ cmp.ne.or p_ll,p0=s_vmatch0,s_vscan0
+ cmp.ne.or p_ll,p0=s_vmatbst,s_vscanend
+(p_ll) br.cond.dptk.many .next_iter
+ ;;
+}{.mmi // Cycle 6
+ ld1.nt1 s_vmatch3=[s_amatch]
+ mova s_vlen=3
+ nop.i 0
+}{.mib
+ cmp.ne.or p_ll,p0=s_vmatch1,s_vscan1
+(p_bn2) cmp.ne.or p_ll,p0=s_vmatbst1,s_vscanend1
+(p_ll) br.cond.dptk.many .next_iter
+ ;;
+}
+
+// We have passed the first hurdle - Are there additional matches ???
+
+.test_more:
+{.mmi // Cycle 0
+ and s_tm3=7,s_ascan // get byte offset
+ and s_tm4=7,s_amatch // get byte offset
+ movi0 ar.ec=MLAT+SHLAT+2 // NB: One trip more than usual
+}{.mib
+ cmp.ne.unc p_no,p0=s_vscan3,s_vmatch3 // does not next one differ?
+(p_no) br.cond.dptk.many .only3
+ ;;
+}{.mmi // Cycle 1
+ and s_tm1=-8,s_ascan // get aligned address
+ shladd s_tm3=s_tm3,3,r0
+ movi0 ar.lc=31 // 32 times around the loop (8B at a time)
+}{.mib
+ and s_tm2=-8,s_amatch // get aligned address
+ shladd s_tm4=s_tm4,3,r0
+ nop.b 0
+ ;;
+}{.mmi // Cycle 2
+ ld8.nt1 scan[1]=[s_tm1],8 // load first chunk
+ sub s_tm5=64,s_tm3 // 64 - amount
+ movi0 pr.rot=1<<16
+}{.mmi
+ ld8.nt1 match[1]=[s_tm2],8 // load first chunk
+ sub s_tm6=64,s_tm4 // 64 - amount
+ add s_vlen=-8,s_vlen // will be updated at least once
+ ;;
+}
+ .align 32
+.cmploop:
+{.mmi // Cycle 0
+(lc[0]) ld8 scan[0]=[s_tm1],8 // next scan chunk
+(lc[MLAT+SHLAT+1]) add s_vlen=8,s_vlen
+(lc[MLAT]) first shscan0[0]=scan[MLAT+1],s_tm3
+}{.mib
+(lc[MLAT+SHLAT+1]) cmp.ne.unc p_no,p0=s_tm7,s_tm8 // break search if !=
+(lc[MLAT]) first shmatch0[0]=match[MLAT+1],s_tm4
+(p_no) br.cond.dpnt.many .mismatch
+ ;;
+}{.mii // Cycle 1
+(lc[0]) ld8 match[0]=[s_tm2],8
+ // shift left(le) or right(be):
+(lc[MLAT]) second shscan1[0]=scan[MLAT],s_tm5
+(lc[MLAT]) second shmatch1[0]=match[MLAT],s_tm6
+}{.mmb
+(lc[MLAT+SHLAT]) or s_tm7=shscan0[SHLAT],shscan1[SHLAT]
+(lc[MLAT+SHLAT]) or s_tm8=shmatch0[SHLAT],shmatch1[SHLAT]
+ br.ctop.dptk.many .cmploop
+ ;;
+}{.mfi
+ mov s_vlen=258
+ nop.f 0
+}{.mfi
+ nop.f 0 // realign
+ ;;
+}
+.mismatch:
+{.mii // Cycle 0 (short)
+(p_no) pcmp1.eq s_tm2=s_tm7,s_tm8 // find first non-matching character
+ nop.i 0
+ ;;
+ // Cycle 1 (short)
+(p_no) count s_tm1=s_tm2
+ ;;
+}{.mib // Cycle 2 (short)
+(p_no) add s_vlen=s_vlen,s_tm1 // effective length
+ nop.i 0
+ clrrrb
+ ;;
+}
+
+.only3:
+{.mib // Cycle 0 (short)
+ cmp.gt.unc p0,p_nbs=s_vlen,s_vbestlen // (len > best_len) ?
+(p_nbs) br.cond.dpnt.many .next_iter // if not, re-iternate
+ ;;
+}{.mmi // Cycle 1 (short)
+ ld4 s_tm7=[s_anicematch] // nice_match
+ st4 [s_amatchstart]= s_vcurmatch
+ add s_ascanend=s_ascan,s_vlen // reset with best_len
+ ;;
+}{.mmi // Cycle 2 (short)
+ mova s_vbestlen=s_vlen
+ add s_ascanend=-3,s_ascanend // remember extra offset
+ ;;
+}{.mmi // Cycle 3 (short)
+ ld1 s_vscanend=[s_ascanend],-1 // scan_end=scan[best_len]
+ add s_awinbest=s_awindow,s_vbestlen // update with new best_len
+ cmp.ne.unc p_bn2,p0=2,s_vbestlen // set if bestlen != 2
+ ;;
+}{.mib // Cycle 4 (short)
+ // scan_end1=scan[best_len-1] NB: s_ascanend reset:
+ ld1.nt1 s_vscanend1=[s_ascanend],1
+ cmp.lt.unc p_nnc,p0=s_vlen,s_tm7 // compare with nice_match
+(p_nnc) br.cond.dptk.many .next_iter
+ ;;
+}
+.terminate:
+{.mii // Cycle 0/1
+ nop.m 0
+ movi0 ar.lc=s_lcsave
+ movi0 pr=s_prsave,-1
+}{.mbb
+ nop.m 0
+ nop.b 0
+ br.ret.sptk.many rp // ret0 is identical to best_len
+ ;;
+}
+ .endp
+
+ .global match_init
+ .proc match_init
+match_init:
+ sub ret0=ret0,ret0
+ br.ret.sptk.many rp
+ .endp
+
+# else
+ error: this asm version is for 386 or 680x0 or ia64 only
+# endif /* __ia64__ */
+#endif /* mc68000 || mc68020 */
+#endif /* i386 || _I386 */
--- /dev/null
+/* Invoke open, but avoid some glitches.
+
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#include <config.h>
+
+#include "fcntl-safer.h"
+
+#include <fcntl.h>
+#include <stdarg.h>
+#include "unistd-safer.h"
+
+int
+open_safer (char const *file, int flags, ...)
+{
+ mode_t mode = 0;
+
+ if (flags & O_CREAT)
+ {
+ va_list ap;
+ va_start (ap, flags);
+
+ /* Assume mode_t promotes to int if and only if it is smaller.
+ This assumption isn't guaranteed by the C standard, but we
+ don't know of any real-world counterexamples. */
+ mode = (sizeof (mode_t) < sizeof (int)
+ ? va_arg (ap, int)
+ : va_arg (ap, mode_t));
+
+ va_end (ap);
+ }
+
+ return fd_safer (open (file, flags, mode));
+}
--- /dev/null
+/* Invoke pipe, but avoid some glitches.
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Jim Meyering. */
+
+#include <config.h>
+
+#include "unistd-safer.h"
+
+#include <unistd.h>
+#include <errno.h>
+
+/* Like pipe, but ensure that neither of the file descriptors is
+ STDIN_FILENO, STDOUT_FILENO, or STDERR_FILENO. Fail with ENOSYS on
+ platforms that lack pipe. */
+
+int
+pipe_safer (int fd[2])
+{
+#if HAVE_PIPE
+ if (pipe (fd) == 0)
+ {
+ int i;
+ for (i = 0; i < 2; i++)
+ {
+ fd[i] = fd_safer (fd[i]);
+ if (fd[i] < 0)
+ {
+ int e = errno;
+ close (fd[1 - i]);
+ errno = e;
+ return -1;
+ }
+ }
+
+ return 0;
+ }
+#else
+ errno = ENOSYS;
+#endif
+
+ return -1;
+}
--- /dev/null
+/* stat-related time functions.
+
+ Copyright (C) 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#ifndef STAT_TIME_H
+#define STAT_TIME_H 1
+
+#include "timespec.h"
+
+/* STAT_TIMESPEC (ST, ST_XTIM) is the ST_XTIM member for *ST of type
+ struct timespec, if available. If not, then STAT_TIMESPEC_NS (ST,
+ ST_XTIM) is the nanosecond component of the ST_XTIM member for *ST,
+ if available. ST_XTIM can be st_atim, st_ctim, or st_mtim for
+ access, status change, or data modification time, respectively.
+
+ These macros are private to stat-time.h. */
+#if defined HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC
+# ifdef TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC
+# define STAT_TIMESPEC(st, st_xtim) ((st)->st_xtim)
+# else
+# define STAT_TIMESPEC_NS(st, st_xtim) ((st)->st_xtim.tv_nsec)
+# endif
+#elif defined HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC
+# define STAT_TIMESPEC(st, st_xtim) ((st)->st_xtim##espec)
+#elif defined HAVE_STRUCT_STAT_ST_ATIMENSEC
+# define STAT_TIMESPEC_NS(st, st_xtim) ((st)->st_xtim##ensec)
+#elif defined HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC
+# define STAT_TIMESPEC_NS(st, st_xtim) ((st)->st_xtim.st__tim.tv_nsec)
+#endif
+
+/* Return the nanosecond component of *ST's access time. */
+static inline long int
+get_stat_atime_ns (struct stat const *st)
+{
+# if defined STAT_TIMESPEC
+ return STAT_TIMESPEC (st, st_atim).tv_nsec;
+# elif defined STAT_TIMESPEC_NS
+ return STAT_TIMESPEC_NS (st, st_atim);
+# elif defined HAVE_STRUCT_STAT_ST_SPARE1
+ return st->st_spare1 * 1000;
+# else
+ return 0;
+# endif
+}
+
+/* Return the nanosecond component of *ST's status change time. */
+static inline long int
+get_stat_ctime_ns (struct stat const *st)
+{
+# if defined STAT_TIMESPEC
+ return STAT_TIMESPEC (st, st_ctim).tv_nsec;
+# elif defined STAT_TIMESPEC_NS
+ return STAT_TIMESPEC_NS (st, st_ctim);
+# elif defined HAVE_STRUCT_STAT_ST_SPARE1
+ return st->st_spare3 * 1000;
+# else
+ return 0;
+# endif
+}
+
+/* Return the nanosecond component of *ST's data modification time. */
+static inline long int
+get_stat_mtime_ns (struct stat const *st)
+{
+# if defined STAT_TIMESPEC
+ return STAT_TIMESPEC (st, st_mtim).tv_nsec;
+# elif defined STAT_TIMESPEC_NS
+ return STAT_TIMESPEC_NS (st, st_mtim);
+# elif defined HAVE_STRUCT_STAT_ST_SPARE1
+ return st->st_spare2 * 1000;
+# else
+ return 0;
+# endif
+}
+
+/* Return *ST's access time. */
+static inline struct timespec
+get_stat_atime (struct stat const *st)
+{
+#ifdef STAT_TIMESPEC
+ return STAT_TIMESPEC (st, st_atim);
+#else
+ struct timespec t;
+ t.tv_sec = st->st_atime;
+ t.tv_nsec = get_stat_atime_ns (st);
+ return t;
+#endif
+}
+
+/* Return *ST's status change time. */
+static inline struct timespec
+get_stat_ctime (struct stat const *st)
+{
+#ifdef STAT_TIMESPEC
+ return STAT_TIMESPEC (st, st_ctim);
+#else
+ struct timespec t;
+ t.tv_sec = st->st_ctime;
+ t.tv_nsec = get_stat_ctime_ns (st);
+ return t;
+#endif
+}
+
+/* Return *ST's data modification time. */
+static inline struct timespec
+get_stat_mtime (struct stat const *st)
+{
+#ifdef STAT_TIMESPEC
+ return STAT_TIMESPEC (st, st_mtim);
+#else
+ struct timespec t;
+ t.tv_sec = st->st_mtime;
+ t.tv_nsec = get_stat_mtime_ns (st);
+ return t;
+#endif
+}
+
+#endif
--- /dev/null
+/* Provide a more complete sys/stat header file.
+ Copyright (C) 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Eric Blake, Paul Eggert, and Jim Meyering. */
+
+#ifndef _gl_SYS_STAT_H
+#define _gl_SYS_STAT_H
+
+/* This file is supposed to be used on platforms where <sys/stat.h> is
+ incomplete. It is intended to provide definitions and prototypes
+ needed by an application. Start with what the system provides. */
+#include @ABSOLUTE_SYS_STAT_H@
+
+#ifndef S_IFMT
+# define S_IFMT 0170000
+#endif
+
+#if STAT_MACROS_BROKEN
+# undef S_ISBLK
+# undef S_ISCHR
+# undef S_ISDIR
+# undef S_ISFIFO
+# undef S_ISLNK
+# undef S_ISNAM
+# undef S_ISMPB
+# undef S_ISMPC
+# undef S_ISNWK
+# undef S_ISREG
+# undef S_ISSOCK
+#endif
+
+#ifndef S_ISBLK
+# ifdef S_IFBLK
+# define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
+# else
+# define S_ISBLK(m) 0
+# endif
+#endif
+
+#ifndef S_ISCHR
+# ifdef S_IFCHR
+# define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
+# else
+# define S_ISCHR(m) 0
+# endif
+#endif
+
+#ifndef S_ISDIR
+# ifdef S_IFDIR
+# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
+# else
+# define S_ISDIR(m) 0
+# endif
+#endif
+
+#ifndef S_ISDOOR /* Solaris 2.5 and up */
+# define S_ISDOOR(m) 0
+#endif
+
+#ifndef S_ISFIFO
+# ifdef S_IFIFO
+# define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
+# else
+# define S_ISFIFO(m) 0
+# endif
+#endif
+
+#ifndef S_ISLNK
+# ifdef S_IFLNK
+# define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
+# else
+# define S_ISLNK(m) 0
+# endif
+#endif
+
+#ifndef S_ISMPB /* V7 */
+# ifdef S_IFMPB
+# define S_ISMPB(m) (((m) & S_IFMT) == S_IFMPB)
+# define S_ISMPC(m) (((m) & S_IFMT) == S_IFMPC)
+# else
+# define S_ISMPB(m) 0
+# define S_ISMPC(m) 0
+# endif
+#endif
+
+#ifndef S_ISNAM /* Xenix */
+# ifdef S_IFNAM
+# define S_ISNAM(m) (((m) & S_IFMT) == S_IFNAM)
+# else
+# define S_ISNAM(m) 0
+# endif
+#endif
+
+#ifndef S_ISNWK /* HP/UX */
+# ifdef S_IFNWK
+# define S_ISNWK(m) (((m) & S_IFMT) == S_IFNWK)
+# else
+# define S_ISNWK(m) 0
+# endif
+#endif
+
+#ifndef S_ISPORT /* Solaris 10 and up */
+# define S_ISPORT(m) 0
+#endif
+
+#ifndef S_ISREG
+# ifdef S_IFREG
+# define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
+# else
+# define S_ISREG(m) 0
+# endif
+#endif
+
+#ifndef S_ISSOCK
+# ifdef S_IFSOCK
+# define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
+# else
+# define S_ISSOCK(m) 0
+# endif
+#endif
+
+
+#ifndef S_TYPEISMQ
+# define S_TYPEISMQ(p) 0
+#endif
+
+#ifndef S_TYPEISTMO
+# define S_TYPEISTMO(p) 0
+#endif
+
+
+#ifndef S_TYPEISSEM
+# ifdef S_INSEM
+# define S_TYPEISSEM(p) (S_ISNAM ((p)->st_mode) && (p)->st_rdev == S_INSEM)
+# else
+# define S_TYPEISSEM(p) 0
+# endif
+#endif
+
+#ifndef S_TYPEISSHM
+# ifdef S_INSHD
+# define S_TYPEISSHM(p) (S_ISNAM ((p)->st_mode) && (p)->st_rdev == S_INSHD)
+# else
+# define S_TYPEISSHM(p) 0
+# endif
+#endif
+
+/* high performance ("contiguous data") */
+#ifndef S_ISCTG
+# define S_ISCTG(p) 0
+#endif
+
+/* Cray DMF (data migration facility): off line, with data */
+#ifndef S_ISOFD
+# define S_ISOFD(p) 0
+#endif
+
+/* Cray DMF (data migration facility): off line, with no data */
+#ifndef S_ISOFL
+# define S_ISOFL(p) 0
+#endif
+
+/* 4.4BSD whiteout */
+#ifndef S_ISWHT
+# define S_ISWHT(m) 0
+#endif
+
+/* If any of the following are undefined,
+ define them to their de facto standard values. */
+#if !S_ISUID
+# define S_ISUID 04000
+#endif
+#if !S_ISGID
+# define S_ISGID 02000
+#endif
+
+/* S_ISVTX is a common extension to POSIX. */
+#ifndef S_ISVTX
+# define S_ISVTX 01000
+#endif
+
+#if !S_IRUSR && S_IREAD
+# define S_IRUSR S_IREAD
+#endif
+#if !S_IRUSR
+# define S_IRUSR 00400
+#endif
+#if !S_IRGRP
+# define S_IRGRP (S_IRUSR >> 3)
+#endif
+#if !S_IROTH
+# define S_IROTH (S_IRUSR >> 6)
+#endif
+
+#if !S_IWUSR && S_IWRITE
+# define S_IWUSR S_IWRITE
+#endif
+#if !S_IWUSR
+# define S_IWUSR 00200
+#endif
+#if !S_IWGRP
+# define S_IWGRP (S_IWUSR >> 3)
+#endif
+#if !S_IWOTH
+# define S_IWOTH (S_IWUSR >> 6)
+#endif
+
+#if !S_IXUSR && S_IEXEC
+# define S_IXUSR S_IEXEC
+#endif
+#if !S_IXUSR
+# define S_IXUSR 00100
+#endif
+#if !S_IXGRP
+# define S_IXGRP (S_IXUSR >> 3)
+#endif
+#if !S_IXOTH
+# define S_IXOTH (S_IXUSR >> 6)
+#endif
+
+#if !S_IRWXU
+# define S_IRWXU (S_IRUSR | S_IWUSR | S_IXUSR)
+#endif
+#if !S_IRWXG
+# define S_IRWXG (S_IRGRP | S_IWGRP | S_IXGRP)
+#endif
+#if !S_IRWXO
+# define S_IRWXO (S_IROTH | S_IWOTH | S_IXOTH)
+#endif
+
+/* S_IXUGO is a common extension to POSIX. */
+#if !S_IXUGO
+# define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH)
+#endif
+
+#ifndef S_IRWXUGO
+# define S_IRWXUGO (S_IRWXU | S_IRWXG | S_IRWXO)
+#endif
+
+/* mingw does not support symlinks, therefore it does not have lstat. But
+ without links, stat does just fine. */
+#if ! HAVE_LSTAT
+# define lstat stat
+#endif
+
+/* mingw's _mkdir() function has 1 argument, but we pass 2 arguments.
+ Additionally, it declares _mkdir (and depending on compile flags, an
+ alias mkdir), only in the nonstandard io.h. */
+#if ! HAVE_DECL_MKDIR && HAVE_IO_H
+# include <io.h>
+
+static inline int
+rpl_mkdir (char const *name, mode_t mode)
+{
+ return _mkdir (name);
+}
+
+# define mkdir rpl_mkdir
+#endif
+
+#endif /* _gl_SYS_STAT_H */
--- /dev/null
+/* Copyright (C) 2001, 2002, 2003, 2006 Free Software Foundation, Inc.
+ Written by Bruno Haible <haible@clisp.cons.org>, 2001.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef _STDBOOL_H
+#define _STDBOOL_H
+
+/* ISO C 99 <stdbool.h> for platforms that lack it. */
+
+/* Usage suggestions:
+
+ Programs that use <stdbool.h> should be aware of some limitations
+ and standards compliance issues.
+
+ Standards compliance:
+
+ - <stdbool.h> must be #included before 'bool', 'false', 'true'
+ can be used.
+
+ - You cannot assume that sizeof (bool) == 1.
+
+ - Programs should not undefine the macros bool, true, and false,
+ as C99 lists that as an "obsolescent feature".
+
+ Limitations of this substitute, when used in a C89 environment:
+
+ - <stdbool.h> must be #included before the '_Bool' type can be used.
+
+ - You cannot assume that _Bool is a typedef; it might be a macro.
+
+ - In C99, casts and automatic conversions to '_Bool' or 'bool' are
+ performed in such a way that every nonzero value gets converted
+ to 'true', and zero gets converted to 'false'. This doesn't work
+ with this substitute. With this substitute, only the values 0 and 1
+ give the expected result when converted to _Bool' or 'bool'.
+
+ Also, it is suggested that programs use 'bool' rather than '_Bool';
+ this isn't required, but 'bool' is more common. */
+
+
+/* 7.16. Boolean type and values */
+
+/* BeOS <sys/socket.h> already #defines false 0, true 1. We use the same
+ definitions below, but temporarily we have to #undef them. */
+#ifdef __BEOS__
+# include <OS.h> /* defines bool but not _Bool */
+# undef false
+# undef true
+#endif
+
+/* For the sake of symbolic names in gdb, we define true and false as
+ enum constants, not only as macros.
+ It is tempting to write
+ typedef enum { false = 0, true = 1 } _Bool;
+ so that gdb prints values of type 'bool' symbolically. But if we do
+ this, values of type '_Bool' may promote to 'int' or 'unsigned int'
+ (see ISO C 99 6.7.2.2.(4)); however, '_Bool' must promote to 'int'
+ (see ISO C 99 6.3.1.1.(2)). So we add a negative value to the
+ enum; this ensures that '_Bool' promotes to 'int'. */
+#if defined __cplusplus || defined __BEOS__
+ /* A compiler known to have 'bool'. */
+ /* If the compiler already has both 'bool' and '_Bool', we can assume they
+ are the same types. */
+# if !@HAVE__BOOL@
+typedef bool _Bool;
+# endif
+#else
+# if !defined __GNUC__
+ /* If @HAVE__BOOL@:
+ Some HP-UX cc and AIX IBM C compiler versions have compiler bugs when
+ the built-in _Bool type is used. See
+ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
+ Similar bugs are likely with other compilers as well; this file
+ wouldn't be used if <stdbool.h> was working.
+ So we override the _Bool type.
+ If !@HAVE__BOOL@:
+ Need to define _Bool ourselves. As 'signed char' or as an enum type?
+ Use of a typedef, with SunPRO C, leads to a stupid
+ "warning: _Bool is a keyword in ISO C99".
+ Use of an enum type, with IRIX cc, leads to a stupid
+ "warning(1185): enumerated type mixed with another type".
+ The only benefit of the enum type, debuggability, is not important
+ with these compilers. So use 'signed char' and no typedef. */
+# define _Bool signed char
+enum { false = 0, true = 1 };
+# else
+ /* With this compiler, trust the _Bool type if the compiler has it. */
+# if !@HAVE__BOOL@
+typedef enum { _Bool_must_promote_to_int = -1, false = 0, true = 1 } _Bool;
+# endif
+# endif
+#endif
+#define bool _Bool
+
+/* The other macros must be usable in preprocessor directives. */
+#define false 0
+#define true 1
+#define __bool_true_false_are_defined 1
+
+#endif /* _STDBOOL_H */
--- /dev/null
+/* timespec -- System time interface
+
+ Copyright (C) 2000, 2002, 2004, 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#if ! defined TIMESPEC_H
+# define TIMESPEC_H
+
+# include <sys/types.h>
+# if TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+# else
+# if HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+# endif
+
+# if ! HAVE_STRUCT_TIMESPEC
+/* Some systems don't define this struct, e.g., AIX 4.1, Ultrix 4.3. */
+struct timespec
+{
+ time_t tv_sec;
+ long tv_nsec;
+};
+# endif
+
+/* Return negative, zero, positive if A < B, A == B, A > B, respectively.
+ Assume the nanosecond components are in range, or close to it. */
+static inline int
+timespec_cmp (struct timespec a, struct timespec b)
+{
+ return (a.tv_sec < b.tv_sec ? -1
+ : a.tv_sec > b.tv_sec ? 1
+ : a.tv_nsec - b.tv_nsec);
+}
+
+# if ! HAVE_DECL_NANOSLEEP
+/* Don't specify a prototype here. Some systems (e.g., OSF) declare
+ nanosleep with a conflicting one (const-less first parameter). */
+int nanosleep ();
+# endif
+
+void gettime (struct timespec *);
+int settime (struct timespec const *);
+
+#endif
--- /dev/null
+/* Like unistd.h, but redefine some names to avoid glitches.
+
+ Copyright (C) 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+#include <unistd.h>
+#include "unistd-safer.h"
+
+#undef dup
+#define dup dup_safer
+
+#undef pipe
+#define pipe pipe_safer
--- /dev/null
+/* Invoke unistd-like functions, but avoid some glitches.
+
+ Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+int dup_safer (int);
+int fd_safer (int);
+int pipe_safer (int[2]);
--- /dev/null
+/* Set file access and modification times.
+
+ Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the
+ Free Software Foundation; either version 2, or (at your option) any
+ later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/* Written by Paul Eggert. */
+
+/* derived from a function in touch.c */
+
+#include <config.h>
+
+#include "utimens.h"
+
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#if HAVE_UTIME_H
+# include <utime.h>
+#endif
+
+/* Some systems (even some that do have <utime.h>) don't declare this
+ structure anywhere. */
+#ifndef HAVE_STRUCT_UTIMBUF
+struct utimbuf
+{
+ long actime;
+ long modtime;
+};
+#endif
+
+/* Some systems don't have ENOSYS. */
+#ifndef ENOSYS
+# ifdef ENOTSUP
+# define ENOSYS ENOTSUP
+# else
+/* Some systems don't have ENOTSUP either. */
+# define ENOSYS EINVAL
+# endif
+#endif
+
+#ifndef __attribute__
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
+# define __attribute__(x)
+# endif
+#endif
+
+#ifndef ATTRIBUTE_UNUSED
+# define ATTRIBUTE_UNUSED __attribute__ ((__unused__))
+#endif
+
+/* Set the access and modification time stamps of FD (a.k.a. FILE) to be
+ TIMESPEC[0] and TIMESPEC[1], respectively.
+ FD must be either negative -- in which case it is ignored --
+ or a file descriptor that is open on FILE.
+ If FD is nonnegative, then FILE can be NULL, which means
+ use just futimes (or equivalent) instead of utimes (or equivalent),
+ and fail if on an old system without futimes (or equivalent).
+ If TIMESPEC is null, set the time stamps to the current time.
+ Return 0 on success, -1 (setting errno) on failure. */
+
+int
+futimens (int fd ATTRIBUTE_UNUSED,
+ char const *file, struct timespec const timespec[2])
+{
+ /* Some Linux-based NFS clients are buggy, and mishandle time stamps
+ of files in NFS file systems in some cases. We have no
+ configure-time test for this, but please see
+ <http://bugs.gentoo.org/show_bug.cgi?id=132673> for references to
+ some of the problems with Linux 2.6.16. If this affects you,
+ compile with -DHAVE_BUGGY_NFS_TIME_STAMPS; this is reported to
+ help in some cases, albeit at a cost in performance. But you
+ really should upgrade your kernel to a fixed version, since the
+ problem affects many applications. */
+
+#if HAVE_BUGGY_NFS_TIME_STAMPS
+ if (fd < 0)
+ sync ();
+ else
+ fsync (fd);
+#endif
+
+ /* There's currently no interface to set file timestamps with
+ nanosecond resolution, so do the best we can, discarding any
+ fractional part of the timestamp. */
+#if HAVE_FUTIMESAT || HAVE_WORKING_UTIMES
+ struct timeval timeval[2];
+ struct timeval const *t;
+ if (timespec)
+ {
+ timeval[0].tv_sec = timespec[0].tv_sec;
+ timeval[0].tv_usec = timespec[0].tv_nsec / 1000;
+ timeval[1].tv_sec = timespec[1].tv_sec;
+ timeval[1].tv_usec = timespec[1].tv_nsec / 1000;
+ t = timeval;
+ }
+ else
+ t = NULL;
+
+
+ if (fd < 0)
+ {
+# if HAVE_FUTIMESAT
+ return futimesat (AT_FDCWD, file, t);
+# endif
+ }
+ else
+ {
+ /* If futimesat or futimes fails here, don't try to speed things
+ up by returning right away. glibc can incorrectly fail with
+ errno == ENOENT if /proc isn't mounted. Also, Mandrake 10.0
+ in high security mode doesn't allow ordinary users to read
+ /proc/self, so glibc incorrectly fails with errno == EACCES.
+ If errno == EIO, EPERM, or EROFS, it's probably safe to fail
+ right away, but these cases are rare enough that they're not
+ worth optimizing, and who knows what other messed-up systems
+ are out there? So play it safe and fall back on the code
+ below. */
+# if HAVE_FUTIMESAT
+ if (futimesat (fd, NULL, t) == 0)
+ return 0;
+# elif HAVE_FUTIMES
+ if (futimes (fd, t) == 0)
+ return 0;
+# endif
+ }
+#endif
+
+ if (!file)
+ {
+#if ! (HAVE_FUTIMESAT || (HAVE_WORKING_UTIMES && HAVE_FUTIMES))
+ errno = ENOSYS;
+#endif
+
+ /* Prefer EBADF to ENOSYS if both error numbers apply. */
+ if (errno == ENOSYS)
+ {
+ int fd2 = dup (fd);
+ int dup_errno = errno;
+ if (0 <= fd2)
+ close (fd2);
+ errno = (fd2 < 0 && dup_errno == EBADF ? EBADF : ENOSYS);
+ }
+
+ return -1;
+ }
+
+#if HAVE_WORKING_UTIMES
+ return utimes (file, t);
+#else
+ {
+ struct utimbuf utimbuf;
+ struct utimbuf const *ut;
+ if (timespec)
+ {
+ utimbuf.actime = timespec[0].tv_sec;
+ utimbuf.modtime = timespec[1].tv_sec;
+ ut = &utimbuf;
+ }
+ else
+ ut = NULL;
+
+ return utime (file, ut);
+ }
+#endif
+}
+
+/* Set the access and modification time stamps of FILE to be
+ TIMESPEC[0] and TIMESPEC[1], respectively. */
+int
+utimens (char const *file, struct timespec const timespec[2])
+{
+ return futimens (-1, file, timespec);
+}
--- /dev/null
+#include "timespec.h"
+int futimens (int, char const *, struct timespec const [2]);
+int utimens (char const *, struct timespec const [2]);
--- /dev/null
+/* Report a memory allocation failure and exit.
+
+ Copyright (C) 1997, 1998, 1999, 2000, 2002, 2003, 2004, 2006 Free
+ Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#include <config.h>
+
+#include "xalloc.h"
+
+#include <stdlib.h>
+
+#include "error.h"
+#include "exitfail.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
+void
+xalloc_die (void)
+{
+ error (exit_failure, 0, "%s", _("memory exhausted"));
+
+ /* The `noreturn' cannot be given to error, since it may return if
+ its first argument is 0. To help compilers understand the
+ xalloc_die does not return, call abort. Also, the abort is a
+ safety feature if exit_failure is 0 (which shouldn't happen). */
+ abort ();
+}
--- /dev/null
+/* xalloc.h -- malloc with out-of-memory checking
+
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2003, 2004, 2006 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef XALLOC_H_
+# define XALLOC_H_
+
+# include <stddef.h>
+
+
+# ifdef __cplusplus
+extern "C" {
+# endif
+
+
+# ifndef __attribute__
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
+# define __attribute__(x)
+# endif
+# endif
+
+# ifndef ATTRIBUTE_NORETURN
+# define ATTRIBUTE_NORETURN __attribute__ ((__noreturn__))
+# endif
+
+/* This function is always triggered when memory is exhausted.
+ It must be defined by the application, either explicitly
+ or by using gnulib's xalloc-die module. This is the
+ function to call when one wants the program to die because of a
+ memory allocation failure. */
+extern void xalloc_die (void) ATTRIBUTE_NORETURN;
+
+void *xmalloc (size_t s);
+void *xzalloc (size_t s);
+void *xcalloc (size_t n, size_t s);
+void *xrealloc (void *p, size_t s);
+void *x2realloc (void *p, size_t *pn);
+void *xmemdup (void const *p, size_t s);
+char *xstrdup (char const *str);
+
+/* Return 1 if an array of N objects, each of size S, cannot exist due
+ to size arithmetic overflow. S must be positive and N must be
+ nonnegative. This is a macro, not an inline function, so that it
+ works correctly even when SIZE_MAX < N.
+
+ By gnulib convention, SIZE_MAX represents overflow in size
+ calculations, so the conservative dividend to use here is
+ SIZE_MAX - 1, since SIZE_MAX might represent an overflowed value.
+ However, malloc (SIZE_MAX) fails on all known hosts where
+ sizeof (ptrdiff_t) <= sizeof (size_t), so do not bother to test for
+ exactly-SIZE_MAX allocations on such hosts; this avoids a test and
+ branch when S is known to be 1. */
+# define xalloc_oversized(n, s) \
+ ((size_t) (sizeof (ptrdiff_t) <= sizeof (size_t) ? -1 : -2) / (s) < (n))
+
+
+/* In the following macros, T must be an elementary or structure/union or
+ typedef'ed type, or a pointer to such a type. To apply one of the
+ following macros to a function pointer or array type, you need to typedef
+ it first and use the typedef name. */
+
+/* Allocate an object of type T dynamically, with error checking. */
+/* extern t *XMALLOC (typename t); */
+# define XMALLOC(t) ((t *) xmalloc (sizeof (t)))
+
+/* Allocate memory for N elements of type T, with error checking. */
+/* extern t *XNMALLOC (size_t n, typename t); */
+# define XNMALLOC(n, t) \
+ ((t *) (sizeof (t) == 1 ? xmalloc (n) : xnmalloc (n, sizeof (t))))
+
+/* Allocate an object of type T dynamically, with error checking,
+ and zero it. */
+/* extern t *XZALLOC (typename t); */
+# define XZALLOC(t) ((t *) xzalloc (sizeof (t)))
+
+/* Allocate memory for N elements of type T, with error checking,
+ and zero it. */
+/* extern t *XCALLOC (size_t n, typename t); */
+# define XCALLOC(n, t) \
+ ((t *) (sizeof (t) == 1 ? xzalloc (n) : xcalloc (n, sizeof (t))))
+
+
+# if HAVE_INLINE
+# define static_inline static inline
+# else
+ void *xnmalloc (size_t n, size_t s);
+ void *xnrealloc (void *p, size_t n, size_t s);
+ void *x2nrealloc (void *p, size_t *pn, size_t s);
+ char *xcharalloc (size_t n);
+# endif
+
+# ifdef static_inline
+
+/* Allocate an array of N objects, each with S bytes of memory,
+ dynamically, with error checking. S must be nonzero. */
+
+static_inline void *
+xnmalloc (size_t n, size_t s)
+{
+ if (xalloc_oversized (n, s))
+ xalloc_die ();
+ return xmalloc (n * s);
+}
+
+/* Change the size of an allocated block of memory P to an array of N
+ objects each of S bytes, with error checking. S must be nonzero. */
+
+static_inline void *
+xnrealloc (void *p, size_t n, size_t s)
+{
+ if (xalloc_oversized (n, s))
+ xalloc_die ();
+ return xrealloc (p, n * s);
+}
+
+/* If P is null, allocate a block of at least *PN such objects;
+ otherwise, reallocate P so that it contains more than *PN objects
+ each of S bytes. *PN must be nonzero unless P is null, and S must
+ be nonzero. Set *PN to the new number of objects, and return the
+ pointer to the new block. *PN is never set to zero, and the
+ returned pointer is never null.
+
+ Repeated reallocations are guaranteed to make progress, either by
+ allocating an initial block with a nonzero size, or by allocating a
+ larger block.
+
+ In the following implementation, nonzero sizes are doubled so that
+ repeated reallocations have O(N log N) overall cost rather than
+ O(N**2) cost, but the specification for this function does not
+ guarantee that sizes are doubled.
+
+ Here is an example of use:
+
+ int *p = NULL;
+ size_t used = 0;
+ size_t allocated = 0;
+
+ void
+ append_int (int value)
+ {
+ if (used == allocated)
+ p = x2nrealloc (p, &allocated, sizeof *p);
+ p[used++] = value;
+ }
+
+ This causes x2nrealloc to allocate a block of some nonzero size the
+ first time it is called.
+
+ To have finer-grained control over the initial size, set *PN to a
+ nonzero value before calling this function with P == NULL. For
+ example:
+
+ int *p = NULL;
+ size_t used = 0;
+ size_t allocated = 0;
+ size_t allocated1 = 1000;
+
+ void
+ append_int (int value)
+ {
+ if (used == allocated)
+ {
+ p = x2nrealloc (p, &allocated1, sizeof *p);
+ allocated = allocated1;
+ }
+ p[used++] = value;
+ }
+
+ */
+
+static_inline void *
+x2nrealloc (void *p, size_t *pn, size_t s)
+{
+ size_t n = *pn;
+
+ if (! p)
+ {
+ if (! n)
+ {
+ /* The approximate size to use for initial small allocation
+ requests, when the invoking code specifies an old size of
+ zero. 64 bytes is the largest "small" request for the
+ GNU C library malloc. */
+ enum { DEFAULT_MXFAST = 64 };
+
+ n = DEFAULT_MXFAST / s;
+ n += !n;
+ }
+ }
+ else
+ {
+ if (((size_t) -1) / 2 / s < n)
+ xalloc_die ();
+ n *= 2;
+ }
+
+ *pn = n;
+ return xrealloc (p, n * s);
+}
+
+/* Return a pointer to a new buffer of N bytes. This is like xmalloc,
+ except it returns char *. */
+
+static_inline char *
+xcharalloc (size_t n)
+{
+ return XNMALLOC (n, char);
+}
+
+# endif
+
+# ifdef __cplusplus
+}
+
+/* C++ does not allow conversions from void * to other pointer types
+ without a cast. Use templates to work around the problem when
+ possible. */
+
+template <typename T> inline T *
+xrealloc (T *p, size_t s)
+{
+ return (T *) xrealloc ((void *) p, s);
+}
+
+template <typename T> inline T *
+xnrealloc (T *p, size_t n, size_t s)
+{
+ return (T *) xnrealloc ((void *) p, n, s);
+}
+
+template <typename T> inline T *
+x2realloc (T *p, size_t *pn)
+{
+ return (T *) x2realloc ((void *) p, pn);
+}
+
+template <typename T> inline T *
+x2nrealloc (T *p, size_t *pn, size_t s)
+{
+ return (T *) x2nrealloc ((void *) p, pn, s);
+}
+
+template <typename T> inline T *
+xmemdup (T const *p, size_t s)
+{
+ return (T *) xmemdup ((void const *) p, s);
+}
+
+# endif
+
+
+#endif /* !XALLOC_H_ */
--- /dev/null
+/* xmalloc.c -- malloc with out of memory checking
+
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+ Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#include <config.h>
+
+#if ! HAVE_INLINE
+# define static_inline
+#endif
+#include "xalloc.h"
+#undef static_inline
+
+#include <stdlib.h>
+#include <string.h>
+
+#ifndef SIZE_MAX
+# define SIZE_MAX ((size_t) -1)
+#endif
+
+/* 1 if calloc is known to be compatible with GNU calloc. This
+ matters if we are not also using the calloc module, which defines
+ HAVE_CALLOC and supports the GNU API even on non-GNU platforms. */
+#if defined HAVE_CALLOC || defined __GLIBC__
+enum { HAVE_GNU_CALLOC = 1 };
+#else
+enum { HAVE_GNU_CALLOC = 0 };
+#endif
+
+/* Allocate N bytes of memory dynamically, with error checking. */
+
+void *
+xmalloc (size_t n)
+{
+ void *p = malloc (n);
+ if (!p && n != 0)
+ xalloc_die ();
+ return p;
+}
+
+/* Change the size of an allocated block of memory P to N bytes,
+ with error checking. */
+
+void *
+xrealloc (void *p, size_t n)
+{
+ p = realloc (p, n);
+ if (!p && n != 0)
+ xalloc_die ();
+ return p;
+}
+
+/* If P is null, allocate a block of at least *PN bytes; otherwise,
+ reallocate P so that it contains more than *PN bytes. *PN must be
+ nonzero unless P is null. Set *PN to the new block's size, and
+ return the pointer to the new block. *PN is never set to zero, and
+ the returned pointer is never null. */
+
+void *
+x2realloc (void *p, size_t *pn)
+{
+ return x2nrealloc (p, pn, 1);
+}
+
+/* Allocate S bytes of zeroed memory dynamically, with error checking.
+ There's no need for xnzalloc (N, S), since it would be equivalent
+ to xcalloc (N, S). */
+
+void *
+xzalloc (size_t s)
+{
+ return memset (xmalloc (s), 0, s);
+}
+
+/* Allocate zeroed memory for N elements of S bytes, with error
+ checking. S must be nonzero. */
+
+void *
+xcalloc (size_t n, size_t s)
+{
+ void *p;
+ /* Test for overflow, since some calloc implementations don't have
+ proper overflow checks. But omit overflow and size-zero tests if
+ HAVE_GNU_CALLOC, since GNU calloc catches overflow and never
+ returns NULL if successful. */
+ if ((! HAVE_GNU_CALLOC && xalloc_oversized (n, s))
+ || (! (p = calloc (n, s)) && (HAVE_GNU_CALLOC || n != 0)))
+ xalloc_die ();
+ return p;
+}
+
+/* Clone an object P of size S, with error checking. There's no need
+ for xnmemdup (P, N, S), since xmemdup (P, N * S) works without any
+ need for an arithmetic overflow check. */
+
+void *
+xmemdup (void const *p, size_t s)
+{
+ return memcpy (xmalloc (s), p, s);
+}
+
+/* Clone STRING. */
+
+char *
+xstrdup (char const *string)
+{
+ return xmemdup (string, strlen (string) + 1);
+}
--- /dev/null
+/* yesno.c -- read a yes/no response from stdin
+
+ Copyright (C) 1990, 1998, 2001, 2003, 2004, 2005, 2006 Free
+ Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#include <config.h>
+
+#include "yesno.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+
+#if ENABLE_NLS
+# include "getline.h"
+#endif
+
+/* Return true if we read an affirmative line from standard input. */
+
+extern int rpmatch (char const *response);
+
+bool
+yesno (void)
+{
+ bool yes;
+
+#if ENABLE_NLS
+ char *response = NULL;
+ size_t response_size = 0;
+ ssize_t response_len = getline (&response, &response_size, stdin);
+
+ if (response_len <= 0)
+ yes = false;
+ else
+ {
+ response[response_len - 1] = '\0';
+ yes = (0 < rpmatch (response));
+ }
+
+ free (response);
+#else
+ /* Test against "^[yY]", hardcoded to avoid requiring getline,
+ regex, and rpmatch. */
+ int c = getchar ();
+ yes = (c == 'y' || c == 'Y');
+ while (c != '\n' && c != EOF)
+ c = getchar ();
+#endif
+
+ return yes;
+}
--- /dev/null
+/* declare yesno
+ Copyright (C) 2004 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; see the file COPYING.
+ If not, write to the Free Software Foundation,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+#ifndef YESNO_H_
+# define YESNO_H_
+
+# include <stdbool.h>
+
+bool yesno (void);
+
+#endif
*/
#ifdef RCSID
-static char rcsid[] = "$Id: lzw.c,v 0.9 1993/06/10 13:27:31 jloup Exp $";
+static char rcsid[] = "$Id: lzw.c,v 1.3 1999/10/06 05:01:31 eggert Exp $";
#endif
#include <config.h>
/* lzw.h -- define the lzw functions.
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1992-1993 Jean-loup Gailly.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
#if !defined(OF) && defined(lint)
# include "gzip.h"
--- /dev/null
+# absolute-header.m4 serial 6
+dnl Copyright (C) 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Derek Price.
+
+# gl_ABSOLUTE_HEADER(HEADER1 HEADER2 ...)
+# ---------------------------------------
+# Find the absolute name of a header file, assuming the header exists.
+# If the header were sys/inttypes.h, this macro would define
+# ABSOLUTE_SYS_INTTYPES_H to the `""' quoted absolute name of sys/inttypes.h
+# in config.h
+# (e.g. `#define ABSOLUTE_SYS_INTTYPES_H "///usr/include/sys/inttypes.h"').
+# The three "///" are to pacify Sun C 5.8, which otherwise would say
+# "warning: #include of /usr/include/... may be non-portable".
+# Use `""', not `<>', so that the /// cannot be confused with a C99 comment.
+AC_DEFUN([gl_ABSOLUTE_HEADER],
+[AC_LANG_PREPROC_REQUIRE()dnl
+AC_FOREACH([gl_HEADER_NAME], [$1],
+ [AS_VAR_PUSHDEF([gl_absolute_header],
+ [gl_cv_absolute_]m4_quote(m4_defn([gl_HEADER_NAME])))dnl
+ AC_CACHE_CHECK([absolute name of <]m4_quote(m4_defn([gl_HEADER_NAME]))[>],
+ m4_quote(m4_defn([gl_absolute_header])),
+ [AS_VAR_PUSHDEF([ac_header_exists],
+ [ac_cv_header_]m4_quote(m4_defn([gl_HEADER_NAME])))dnl
+ AC_CHECK_HEADERS_ONCE(m4_quote(m4_defn([gl_HEADER_NAME])))dnl
+ if test AS_VAR_GET(ac_header_exists) = yes; then
+ AC_LANG_CONFTEST([AC_LANG_SOURCE([[#include <]]m4_dquote(m4_defn([gl_HEADER_NAME]))[[>]])])
+dnl eval is necessary to expand ac_cpp.
+dnl Ultrix and Pyramid sh refuse to redirect output of eval, so use subshell.
+ AS_VAR_SET(gl_absolute_header,
+[`(eval "$ac_cpp conftest.$ac_ext") 2>&AS_MESSAGE_LOG_FD |
+sed -n '\#/]m4_quote(m4_defn([gl_HEADER_NAME]))[#{s#.*"\(.*/]m4_quote(m4_defn([gl_HEADER_NAME]))[\)".*#\1#;s#^/[^/]#//&#;p;q;}'`])
+ fi
+ AS_VAR_POPDEF([ac_header_exists])dnl
+ ])dnl
+ AC_DEFINE_UNQUOTED(AS_TR_CPP([ABSOLUTE_]m4_quote(m4_defn([gl_HEADER_NAME]))),
+ ["AS_VAR_GET(gl_absolute_header)"],
+ [Define this to an absolute name of <]m4_quote(m4_defn([gl_HEADER_NAME]))[>.])
+ AS_VAR_POPDEF([gl_absolute_header])dnl
+])dnl
+])# gl_ABSOLUTE_HEADER
--- /dev/null
+#serial 11
+
+# Copyright (C) 1996, 1997, 1998, 2001, 2002, 2003, 2004 Free Software
+# Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_ERROR],
+[
+ AC_FUNC_ERROR_AT_LINE
+ dnl Note: AC_FUNC_ERROR_AT_LINE does AC_LIBSOURCES([error.h, error.c]).
+ gl_PREREQ_ERROR
+])
+
+# Prerequisites of lib/error.c.
+AC_DEFUN([gl_PREREQ_ERROR],
+[
+ AC_REQUIRE([AC_FUNC_STRERROR_R])
+ :
+])
--- /dev/null
+# exitfail.m4 serial 6
+dnl Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_EXITFAIL],
+[
+ AC_LIBOBJ([exitfail])
+
+ dnl No prerequisites of lib/exitfail.c.
+ :
+])
--- /dev/null
+# serial 4 -*- Autoconf -*-
+# Enable extensions on systems that normally disable them.
+
+# Copyright (C) 2003, 2006 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This definition of AC_USE_SYSTEM_EXTENSIONS is stolen from CVS
+# Autoconf. Perhaps we can remove this once we can assume Autoconf
+# 2.61 or later everywhere, but since CVS Autoconf mutates rapidly
+# enough in this area it's likely we'll need to redefine
+# AC_USE_SYSTEM_EXTENSIONS for quite some time.
+
+# AC_USE_SYSTEM_EXTENSIONS
+# ------------------------
+# Enable extensions on systems that normally disable them,
+# typically due to standards-conformance issues.
+AC_DEFUN([AC_USE_SYSTEM_EXTENSIONS],
+[
+ AC_BEFORE([$0], [AC_COMPILE_IFELSE])
+ AC_BEFORE([$0], [AC_RUN_IFELSE])
+
+ AC_REQUIRE([AC_GNU_SOURCE])
+ AC_REQUIRE([AC_AIX])
+ AC_REQUIRE([AC_MINIX])
+
+ AH_VERBATIM([__EXTENSIONS__],
+[/* Enable extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif])
+ AC_CACHE_CHECK([whether it is safe to define __EXTENSIONS__],
+ [ac_cv_safe_to_define___extensions__],
+ [AC_COMPILE_IFELSE(
+ [AC_LANG_PROGRAM([
+# define __EXTENSIONS__ 1
+ AC_INCLUDES_DEFAULT])],
+ [ac_cv_safe_to_define___extensions__=yes],
+ [ac_cv_safe_to_define___extensions__=no])])
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ AC_DEFINE([__EXTENSIONS__])
+ AC_DEFINE([_POSIX_PTHREAD_SEMANTICS])
+ AC_DEFINE([_TANDEM_SOURCE])
+])
+
+# gl_USE_SYSTEM_EXTENSIONS
+# ------------------------
+# Enable extensions on systems that normally disable them,
+# typically due to standards-conformance issues.
+AC_DEFUN([gl_USE_SYSTEM_EXTENSIONS],
+ [AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])])
--- /dev/null
+#serial 4
+dnl Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_FCNTL_SAFER],
+[
+ AC_LIBOBJ([open-safer])
+ AC_LIBOBJ([creat-safer])
+ AC_DEFINE([GNULIB_FCNTL_SAFER], [1],
+ [Define to 1 when using the gnulib fcntl-safer module.])
+])
--- /dev/null
+# Configure fcntl.h.
+dnl Copyright (C) 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Written by Paul Eggert.
+
+AC_DEFUN([gl_FCNTL_H],
+[
+ AC_CACHE_CHECK([for working fcntl.h], gl_cv_header_working_fcntl_h,
+ [AC_RUN_IFELSE(
+ [AC_LANG_PROGRAM(
+ [[#include <sys/types.h>
+ #include <sys/stat.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #ifndef O_NOATIME
+ #define O_NOATIME 0
+ #endif
+ #ifndef O_NOFOLLOW
+ #define O_NOFOLLOW 0
+ #endif
+ static int const constants[] =
+ {
+ O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
+ O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
+ };
+ ]],
+ [[
+ int status = !constants;
+ {
+ static char const sym[] = "conftest.sym";
+ if (symlink (".", sym) != 0
+ || close (open (sym, O_RDONLY | O_NOFOLLOW)) == 0)
+ status |= 32;
+ }
+ {
+ static char const file[] = "confdefs.h";
+ int fd = open (file, O_RDONLY | O_NOATIME);
+ char c;
+ struct stat st0, st1;
+ if (fd < 0
+ || fstat (fd, &st0) != 0
+ || sleep (1) != 0
+ || read (fd, &c, 1) != 1
+ || close (fd) != 0
+ || stat (file, &st1) != 0
+ || st0.st_atime != st1.st_atime)
+ status |= 64;
+ }
+ return status;]])],
+ [gl_cv_header_working_fcntl_h=yes],
+ [case $? in #(
+ 32) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
+ 64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
+ 96) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
+ *) gl_cv_header_working_fcntl_h='no';;
+ esac],
+ [gl_cv_header_working_fcntl_h=cross-compiling])])
+
+ case $gl_cv_header_working_fcntl_h in #(
+ *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
+ *) ac_val=1;;
+ esac
+ AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOATIME], [$ac_val],
+ [Define to 1 if O_NOATIME works.])
+
+ case $gl_cv_header_working_fcntl_h in #(
+ *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
+ *) ac_val=1;;
+ esac
+ AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOFOLLOW], [$ac_val],
+ [Define to 1 if O_NOFOLLOW works.])
+
+ gl_ABSOLUTE_HEADER([fcntl.h])
+ ABSOLUTE_FCNTL_H=\"$gl_cv_absolute_fcntl_h\"
+ AC_SUBST([ABSOLUTE_FCNTL_H])
+ FCNTL_H='fcntl.h'
+ AC_SUBST([FCNTL_H])
+])
--- /dev/null
+# getopt.m4 serial 13
+dnl Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# The getopt module assume you want GNU getopt, with getopt_long etc,
+# rather than vanilla POSIX getopt. This means your code should
+# always include <getopt.h> for the getopt prototypes.
+
+AC_DEFUN([gl_GETOPT_SUBSTITUTE],
+[
+ AC_LIBOBJ([getopt])
+ AC_LIBOBJ([getopt1])
+ gl_GETOPT_SUBSTITUTE_HEADER
+ gl_PREREQ_GETOPT
+])
+
+AC_DEFUN([gl_GETOPT_SUBSTITUTE_HEADER],
+[
+ GETOPT_H=getopt.h
+ AC_DEFINE([__GETOPT_PREFIX], [[rpl_]],
+ [Define to rpl_ if the getopt replacement functions and variables
+ should be used.])
+ AC_SUBST([GETOPT_H])
+])
+
+AC_DEFUN([gl_GETOPT_CHECK_HEADERS],
+[
+ if test -z "$GETOPT_H"; then
+ AC_CHECK_HEADERS([getopt.h], [], [GETOPT_H=getopt.h])
+ fi
+
+ if test -z "$GETOPT_H"; then
+ AC_CHECK_FUNCS([getopt_long_only], [], [GETOPT_H=getopt.h])
+ fi
+
+ dnl BSD getopt_long uses an incompatible method to reset option processing,
+ dnl and (as of 2004-10-15) mishandles optional option-arguments.
+ if test -z "$GETOPT_H"; then
+ AC_CHECK_DECL([optreset], [GETOPT_H=getopt.h], [], [#include <getopt.h>])
+ fi
+
+ dnl Solaris 10 getopt doesn't handle `+' as a leading character in an
+ dnl option string (as of 2005-05-05).
+ if test -z "$GETOPT_H"; then
+ AC_CACHE_CHECK([for working GNU getopt function], [gl_cv_func_gnu_getopt],
+ [AC_RUN_IFELSE(
+ [AC_LANG_PROGRAM([#include <getopt.h>],
+ [[
+ char *myargv[3];
+ myargv[0] = "conftest";
+ myargv[1] = "-+";
+ myargv[2] = 0;
+ return getopt (2, myargv, "+a") != '?';
+ ]])],
+ [gl_cv_func_gnu_getopt=yes],
+ [gl_cv_func_gnu_getopt=no],
+ [dnl cross compiling - pessimistically guess based on decls
+ dnl Solaris 10 getopt doesn't handle `+' as a leading character in an
+ dnl option string (as of 2005-05-05).
+ AC_CHECK_DECL([getopt_clip],
+ [gl_cv_func_gnu_getopt=no], [gl_cv_func_gnu_getopt=yes],
+ [#include <getopt.h>])])])
+ if test "$gl_cv_func_gnu_getopt" = "no"; then
+ GETOPT_H=getopt.h
+ fi
+ fi
+])
+
+AC_DEFUN([gl_GETOPT_IFELSE],
+[
+ AC_REQUIRE([gl_GETOPT_CHECK_HEADERS])
+ AS_IF([test -n "$GETOPT_H"], [$1], [$2])
+])
+
+AC_DEFUN([gl_GETOPT], [gl_GETOPT_IFELSE([gl_GETOPT_SUBSTITUTE])])
+
+# Prerequisites of lib/getopt*.
+AC_DEFUN([gl_PREREQ_GETOPT],
+[
+ AC_CHECK_DECLS_ONCE([getenv])
+])
--- /dev/null
+# -*- buffer-read-only: t -*- vi: set ro:
+# DO NOT EDIT! GENERATED AUTOMATICALLY!
+# DO NOT EDIT! GENERATED AUTOMATICALLY!
+# Copyright (C) 2004-2006 Free Software Foundation, Inc.
+#
+# This file is free software, distributed under the terms of the GNU
+# General Public License. As a special exception to the GNU General
+# Public License, this file may be distributed as part of a program
+# that contains a configuration script generated by Autoconf, under
+# the same distribution terms as the rest of that program.
+#
+# Generated by gnulib-tool.
+#
+# This file represents the compiled summary of the specification in
+# gnulib-cache.m4. It lists the computed macro invocations that need
+# to be invoked from configure.ac.
+# In projects using CVS, this file can be treated like other built files.
+
+
+# This macro should be invoked from ./configure.ac, in the section
+# "Checks for programs", right after AC_PROG_CC, and certainly before
+# any checks for libraries, header files, types and library functions.
+AC_DEFUN([gl_EARLY],
+[
+ m4_pattern_forbid([^gl_[A-Z]])dnl the gnulib macro namespace
+ m4_pattern_allow([^gl_ES$])dnl a valid locale name
+ m4_pattern_allow([^gl_LIBOBJS$])dnl a variable
+ m4_pattern_allow([^gl_LTLIBOBJS$])dnl a variable
+ AC_REQUIRE([AC_PROG_RANLIB])
+ AC_REQUIRE([AC_GNU_SOURCE])
+ AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])
+])
+
+# This macro should be invoked from ./configure.ac, in the section
+# "Check for header files, types and library functions".
+AC_DEFUN([gl_INIT],
+[
+ m4_pushdef([AC_LIBOBJ], m4_defn([gl_LIBOBJ]))
+ m4_pushdef([AC_REPLACE_FUNCS], m4_defn([gl_REPLACE_FUNCS]))
+ m4_pushdef([AC_LIBSOURCES], m4_defn([gl_LIBSOURCES]))
+ AM_CONDITIONAL([GL_COND_LIBTOOL], [false])
+ gl_cond_libtool=false
+ gl_libdeps=
+ gl_ltlibdeps=
+ gl_source_base='.#bootmp/lib'
+ gl_ERROR
+ gl_EXITFAIL
+ dnl gl_USE_SYSTEM_EXTENSIONS must be added quite early to configure.ac.
+ gl_FCNTL_H
+ gl_FCNTL_SAFER
+ gl_GETOPT
+ gl_INLINE
+ gl_STAT_TIME
+ AM_STDBOOL_H
+ gl_HEADER_SYS_STAT_H
+ gl_TIMESPEC
+ gl_HEADER_UNISTD
+ gl_UNISTD_SAFER
+ gl_UTIMENS
+ gl_XALLOC
+ gl_YESNO
+ LIBGZIP_LIBDEPS="$gl_libdeps"
+ AC_SUBST([LIBGZIP_LIBDEPS])
+ LIBGZIP_LTLIBDEPS="$gl_ltlibdeps"
+ AC_SUBST([LIBGZIP_LTLIBDEPS])
+ m4_popdef([AC_LIBSOURCES])
+ m4_popdef([AC_REPLACE_FUNCS])
+ m4_popdef([AC_LIBOBJ])
+ AC_CONFIG_COMMANDS_PRE([
+ gl_libobjs=
+ gl_ltlibobjs=
+ if test -n "$gl_LIBOBJS"; then
+ # Remove the extension.
+ sed_drop_objext='s/\.o$//;s/\.obj$//'
+ for i in `for i in $gl_LIBOBJS; do echo "$i"; done | sed "$sed_drop_objext" | sort | uniq`; do
+ gl_libobjs="$gl_libobjs $i.$ac_objext"
+ gl_ltlibobjs="$gl_ltlibobjs $i.lo"
+ done
+ fi
+ AC_SUBST([gl_LIBOBJS], [$gl_libobjs])
+ AC_SUBST([gl_LTLIBOBJS], [$gl_ltlibobjs])
+ ])
+])
+
+# Like AC_LIBOBJ, except that the module name goes
+# into gl_LIBOBJS instead of into LIBOBJS.
+AC_DEFUN([gl_LIBOBJ],
+ [gl_LIBOBJS="$gl_LIBOBJS $1.$ac_objext"])
+
+# Like AC_REPLACE_FUNCS, except that the module name goes
+# into gl_LIBOBJS instead of into LIBOBJS.
+AC_DEFUN([gl_REPLACE_FUNCS],
+ [AC_CHECK_FUNCS([$1], , [gl_LIBOBJ($ac_func)])])
+
+# Like AC_LIBSOURCES, except that it does nothing.
+# We rely on EXTRA_lib..._SOURCES instead.
+AC_DEFUN([gl_LIBSOURCES],
+ [])
+
+# This macro records the list of files which have been installed by
+# gnulib-tool and may be removed by future gnulib-tool invocations.
+AC_DEFUN([gl_FILE_LIST], [
+ doc/fdl.texi
+ lib/creat-safer.c
+ lib/dup-safer.c
+ lib/error.c
+ lib/error.h
+ lib/exit.h
+ lib/exitfail.c
+ lib/exitfail.h
+ lib/fcntl--.h
+ lib/fcntl-safer.h
+ lib/fcntl_.h
+ lib/fd-safer.c
+ lib/getopt.c
+ lib/getopt1.c
+ lib/getopt_.h
+ lib/getopt_int.h
+ lib/gettext.h
+ lib/open-safer.c
+ lib/pipe-safer.c
+ lib/stat-time.h
+ lib/stat_.h
+ lib/stdbool_.h
+ lib/timespec.h
+ lib/unistd--.h
+ lib/unistd-safer.h
+ lib/utimens.c
+ lib/utimens.h
+ lib/xalloc-die.c
+ lib/xalloc.h
+ lib/xmalloc.c
+ lib/yesno.c
+ lib/yesno.h
+ m4/absolute-header.m4
+ m4/error.m4
+ m4/exitfail.m4
+ m4/extensions.m4
+ m4/fcntl-safer.m4
+ m4/fcntl_h.m4
+ m4/getopt.m4
+ m4/inline.m4
+ m4/stat-time.m4
+ m4/stdbool.m4
+ m4/sys_stat_h.m4
+ m4/timespec.m4
+ m4/unistd-safer.m4
+ m4/unistd_h.m4
+ m4/utimbuf.m4
+ m4/utimens.m4
+ m4/utimes.m4
+ m4/xalloc.m4
+ m4/yesno.m4
+])
--- /dev/null
+# inline.m4 serial 3
+dnl Copyright (C) 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Test for the 'inline' keyword or equivalent.
+dnl Define 'inline' to a supported equivalent, or to nothing if not supported,
+dnl like AC_C_INLINE does. Also, define HAVE_INLINE if 'inline' or an
+dnl equivalent is effectively supported, i.e. if the compiler is likely to
+dnl drop unused 'static inline' functions.
+AC_DEFUN([gl_INLINE],
+[
+ AC_REQUIRE([AC_C_INLINE])
+ AC_CACHE_CHECK([whether the compiler generally respects inline],
+ [gl_cv_c_inline_effective],
+ [if test $ac_cv_c_inline = no; then
+ gl_cv_c_inline_effective=no
+ else
+ dnl GCC defines __NO_INLINE__ if not optimizing or if -fno-inline is
+ dnl specified.
+ dnl Use AC_COMPILE_IFELSE here, not AC_EGREP_CPP, because the result
+ dnl depends on optimization flags, which can be in CFLAGS.
+ dnl (AC_EGREP_CPP looks only at the CPPFLAGS.)
+ AC_COMPILE_IFELSE(
+ [AC_LANG_PROGRAM([[]],
+ [[#ifdef __NO_INLINE__
+ #error "inline is not effective"
+ #endif]])],
+ [gl_cv_c_inline_effective=yes],
+ [gl_cv_c_inline_effective=no])
+ fi
+ ])
+ if test $gl_cv_c_inline_effective = yes; then
+ AC_DEFINE([HAVE_INLINE], 1,
+ [Define to 1 if the compiler supports one of the keywords
+ 'inline', '__inline__', '__inline' and effectively inlines
+ functions marked as such.])
+ fi
+])
--- /dev/null
+# Checks for stat-related time functions.
+
+# Copyright (C) 1998, 1999, 2001, 2003, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# st_atim.tv_nsec - Linux, Solaris
+# st_atimespec.tv_nsec - FreeBSD, if ! defined _POSIX_SOURCE
+# st_atimensec - FreeBSD, if defined _POSIX_SOURCE
+# st_atim.st__tim.tv_nsec - UnixWare (at least 2.1.2 through 7.1)
+# st_spare1 - Cygwin?
+
+AC_DEFUN([gl_STAT_TIME],
+[
+ AC_REQUIRE([AC_C_INLINE])
+ AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])
+
+ AC_CHECK_MEMBERS([struct stat.st_atim.tv_nsec],
+ [AC_CACHE_CHECK([whether struct stat.st_atim is of type struct timespec],
+ [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec],
+ [AC_TRY_COMPILE(
+ [
+ #include <sys/types.h>
+ #if TIME_WITH_SYS_TIME
+ # include <sys/time.h>
+ # include <time.h>
+ #else
+ # if HAVE_SYS_TIME_H
+ # include <sys/time.h>
+ # else
+ # include <time.h>
+ # endif
+ #endif
+ #include <sys/stat.h>
+ struct timespec ts;
+ struct stat st;
+ ],
+ [
+ st.st_atim = ts;
+ ],
+ [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=yes],
+ [ac_cv_typeof_struct_stat_st_atim_is_struct_timespec=no])])
+ if test $ac_cv_typeof_struct_stat_st_atim_is_struct_timespec = yes; then
+ AC_DEFINE([TYPEOF_STRUCT_STAT_ST_ATIM_IS_STRUCT_TIMESPEC], 1,
+ [Define to 1 if the type of the st_atim member of a struct stat is
+ struct timespec.])
+ fi],
+ [AC_CHECK_MEMBERS([struct stat.st_atimespec.tv_nsec], [],
+ [AC_CHECK_MEMBERS([struct stat.st_atimensec], [],
+ [AC_CHECK_MEMBERS([struct stat.st_atim.st__tim.tv_nsec], [],
+ [AC_CHECK_MEMBERS([struct stat.st_spare1], [],
+ [],
+ [#include <sys/types.h>
+ #include <sys/stat.h>])],
+ [#include <sys/types.h>
+ #include <sys/stat.h>])],
+ [#include <sys/types.h>
+ #include <sys/stat.h>])],
+ [#include <sys/types.h>
+ #include <sys/stat.h>])],
+ [#include <sys/types.h>
+ #include <sys/stat.h>])
+])
--- /dev/null
+# Check for stdbool.h that conforms to C99.
+
+dnl Copyright (C) 2002-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Prepare for substituting <stdbool.h> if it is not supported.
+
+AC_DEFUN([AM_STDBOOL_H],
+[
+ AC_REQUIRE([AC_HEADER_STDBOOL])
+
+ # Define two additional variables used in the Makefile substitution.
+
+ if test "$ac_cv_header_stdbool_h" = yes; then
+ STDBOOL_H=''
+ else
+ STDBOOL_H='stdbool.h'
+ fi
+ AC_SUBST([STDBOOL_H])
+
+ if test "$ac_cv_type__Bool" = yes; then
+ HAVE__BOOL=1
+ else
+ HAVE__BOOL=0
+ fi
+ AC_SUBST([HAVE__BOOL])
+])
+
+# AM_STDBOOL_H will be renamed to gl_STDBOOL_H in the future.
+AC_DEFUN([gl_STDBOOL_H], [AM_STDBOOL_H])
+
+# This macro is only needed in autoconf <= 2.59. Newer versions of autoconf
+# have this macro built-in.
+
+AC_DEFUN([AC_HEADER_STDBOOL],
+ [AC_CACHE_CHECK([for stdbool.h that conforms to C99],
+ [ac_cv_header_stdbool_h],
+ [AC_TRY_COMPILE(
+ [
+ #include <stdbool.h>
+ #ifndef bool
+ "error: bool is not defined"
+ #endif
+ #ifndef false
+ "error: false is not defined"
+ #endif
+ #if false
+ "error: false is not 0"
+ #endif
+ #ifndef true
+ "error: true is not defined"
+ #endif
+ #if true != 1
+ "error: true is not 1"
+ #endif
+ #ifndef __bool_true_false_are_defined
+ "error: __bool_true_false_are_defined is not defined"
+ #endif
+
+ struct s { _Bool s: 1; _Bool t; } s;
+
+ char a[true == 1 ? 1 : -1];
+ char b[false == 0 ? 1 : -1];
+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+ char d[(bool) 0.5 == true ? 1 : -1];
+ bool e = &s;
+ char f[(_Bool) 0.0 == false ? 1 : -1];
+ char g[true];
+ char h[sizeof (_Bool)];
+ char i[sizeof s.t];
+ enum { j = false, k = true, l = false * true, m = true * 256 };
+ _Bool n[m];
+ char o[sizeof n == m * sizeof n[0] ? 1 : -1];
+ char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1];
+ #if defined __xlc__ || defined __GNUC__
+ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0
+ reported by James Lemley on 2005-10-05; see
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html
+ This test is not quite right, since xlc is allowed to
+ reject this program, as the initializer for xlcbug is
+ not one of the forms that C requires support for.
+ However, doing the test right would require a run-time
+ test, and that would make cross-compilation harder.
+ Let us hope that IBM fixes the xlc bug, and also adds
+ support for this kind of constant expression. In the
+ meantime, this test will reject xlc, which is OK, since
+ our stdbool.h substitute should suffice. We also test
+ this with GCC, where it should work, to detect more
+ quickly whether someone messes up the test in the
+ future. */
+ char digs[] = "0123456789";
+ int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1);
+ #endif
+ /* Catch a bug in an HP-UX C compiler. See
+ http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html
+ http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html
+ */
+ _Bool q = true;
+ _Bool *pq = &q;
+ ],
+ [
+ *pq |= q;
+ *pq |= ! q;
+ /* Refer to every declared value, to avoid compiler optimizations. */
+ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l
+ + !m + !n + !o + !p + !q + !pq);
+ ],
+ [ac_cv_header_stdbool_h=yes],
+ [ac_cv_header_stdbool_h=no])])
+ AC_CHECK_TYPES([_Bool])
+ if test $ac_cv_header_stdbool_h = yes; then
+ AC_DEFINE(HAVE_STDBOOL_H, 1, [Define to 1 if stdbool.h conforms to C99.])
+ fi])
--- /dev/null
+# sys_stat_h.m4 serial 4 -*- Autoconf -*-
+dnl Copyright (C) 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Eric Blake.
+dnl Test whether <sys/stat.h> contains lstat and mkdir or must be substituted.
+
+AC_DEFUN([gl_HEADER_SYS_STAT_H],
+[
+ dnl Check for lstat. Systems that lack it (mingw) also lack symlinks, so
+ dnl stat is a good replacement.
+ AC_CHECK_FUNCS_ONCE([lstat])
+
+ dnl Check for mkdir. Mingw has _mkdir(name) in the nonstandard <io.h>
+ dnl instead.
+ AC_CHECK_DECLS([mkdir],
+ [],
+ [AC_CHECK_HEADERS([io.h])],
+ [#include <sys/stat.h>])
+ AC_REQUIRE([AC_C_INLINE])
+
+ dnl Check for broken stat macros.
+ AC_REQUIRE([AC_HEADER_STAT])
+
+ gl_ABSOLUTE_HEADER([sys/stat.h])
+ ABSOLUTE_SYS_STAT_H=\"$gl_cv_absolute_sys_stat_h\"
+ AC_SUBST([ABSOLUTE_SYS_STAT_H])
+ SYS_STAT_H='sys/stat.h'
+ AC_SUBST([SYS_STAT_H])
+]) # gl_HEADER_SYS_STAT_H
--- /dev/null
+#serial 12
+
+# Copyright (C) 2000, 2001, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+dnl From Jim Meyering
+
+AC_DEFUN([gl_TIMESPEC],
+[
+ dnl Prerequisites of lib/timespec.h.
+ AC_REQUIRE([AC_C_INLINE])
+ AC_REQUIRE([AC_HEADER_TIME])
+ AC_CHECK_HEADERS_ONCE(sys/time.h)
+ gl_CHECK_TYPE_STRUCT_TIMESPEC
+
+ dnl Persuade glibc and Solaris <time.h> to declare nanosleep.
+ AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])
+
+ AC_CHECK_DECLS(nanosleep, , , [#include <time.h>])
+])
+
+dnl Define HAVE_STRUCT_TIMESPEC if `struct timespec' is declared
+dnl in time.h or sys/time.h.
+
+AC_DEFUN([gl_CHECK_TYPE_STRUCT_TIMESPEC],
+[
+ dnl Persuade pedantic Solaris to declare struct timespec.
+ AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])
+
+ AC_REQUIRE([AC_HEADER_TIME])
+ AC_CHECK_HEADERS_ONCE(sys/time.h)
+ AC_CACHE_CHECK([for struct timespec], fu_cv_sys_struct_timespec,
+ [AC_TRY_COMPILE(
+ [
+# if TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+# else
+# if HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+# endif
+ ],
+ [static struct timespec x; x.tv_sec = x.tv_nsec;],
+ fu_cv_sys_struct_timespec=yes,
+ fu_cv_sys_struct_timespec=no)
+ ])
+
+ if test $fu_cv_sys_struct_timespec = yes; then
+ AC_DEFINE(HAVE_STRUCT_TIMESPEC, 1,
+ [Define if struct timespec is declared in <time.h>. ])
+ fi
+])
--- /dev/null
+#serial 8
+dnl Copyright (C) 2002, 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_UNISTD_SAFER],
+[
+ AC_CHECK_FUNCS_ONCE([pipe])
+ AC_LIBOBJ([dup-safer])
+ AC_LIBOBJ([fd-safer])
+ AC_LIBOBJ([pipe-safer])
+])
--- /dev/null
+# unistd_h.m4 serial 2
+dnl Copyright (C) 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Written by Simon Josefsson
+
+AC_DEFUN([gl_HEADER_UNISTD],
+[
+ dnl Prerequisites of lib/unistd.h.
+ AC_CHECK_HEADERS([unistd.h], [
+ UNISTD_H=''
+ ], [
+ UNISTD_H='unistd.h'
+ ])
+ AC_SUBST(UNISTD_H)
+])
--- /dev/null
+#serial 7
+
+# Copyright (C) 1998, 1999, 2000, 2001, 2003, 2004 Free Software
+# Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+dnl From Jim Meyering
+
+dnl Define HAVE_STRUCT_UTIMBUF if `struct utimbuf' is declared --
+dnl usually in <utime.h>.
+dnl Some systems have utime.h but don't declare the struct anywhere.
+
+AC_DEFUN([gl_CHECK_TYPE_STRUCT_UTIMBUF],
+[
+ AC_CHECK_HEADERS_ONCE(sys/time.h utime.h)
+ AC_REQUIRE([AC_HEADER_TIME])
+ AC_CACHE_CHECK([for struct utimbuf], fu_cv_sys_struct_utimbuf,
+ [AC_TRY_COMPILE(
+ [
+#ifdef TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# ifdef HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+#endif
+#ifdef HAVE_UTIME_H
+# include <utime.h>
+#endif
+ ],
+ [static struct utimbuf x; x.actime = x.modtime;],
+ fu_cv_sys_struct_utimbuf=yes,
+ fu_cv_sys_struct_utimbuf=no)
+ ])
+
+ if test $fu_cv_sys_struct_utimbuf = yes; then
+ AC_DEFINE(HAVE_STRUCT_UTIMBUF, 1,
+ [Define if struct utimbuf is declared -- usually in <utime.h>.
+ Some systems have utime.h but don't declare the struct anywhere. ])
+ fi
+])
--- /dev/null
+dnl Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_UTIMENS],
+[
+ AC_LIBOBJ([utimens])
+
+ dnl Prerequisites of lib/utimens.c.
+ AC_REQUIRE([gl_TIMESPEC])
+ AC_REQUIRE([gl_FUNC_UTIMES])
+ AC_REQUIRE([gl_CHECK_TYPE_STRUCT_TIMESPEC])
+ AC_REQUIRE([gl_CHECK_TYPE_STRUCT_UTIMBUF])
+ AC_CHECK_FUNCS_ONCE([futimes futimesat])
+])
--- /dev/null
+# Detect some bugs in glibc's implementation of utimes.
+
+dnl Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# See if we need to work around bugs in glibc's implementation of
+# utimes from 2003-07-12 to 2003-09-17.
+# First, there was a bug that would make utimes set mtime
+# and atime to zero (1970-01-01) unconditionally.
+# Then, there was code to round rather than truncate.
+# Then, there was an implementation (sparc64, Linux-2.4.28, glibc-2.3.3)
+# that didn't honor the NULL-means-set-to-current-time semantics.
+# Finally, there was also a version of utimes that failed on read-only
+# files, while utime worked fine (linux-2.2.20, glibc-2.2.5).
+#
+# From Jim Meyering, with suggestions from Paul Eggert.
+
+AC_DEFUN([gl_FUNC_UTIMES],
+[
+ AC_CACHE_CHECK([determine whether the utimes function works],
+ gl_cv_func_working_utimes,
+ [
+ AC_RUN_IFELSE([AC_LANG_SOURCE([[
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/time.h>
+#include <time.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <utime.h>
+
+int
+main ()
+{
+ static struct timeval timeval[2] = {{9, 10}, {999999, 999999}};
+ struct stat sbuf;
+ char const *file = "conftest.utimes";
+ FILE *f;
+ time_t now;
+ int fd;
+
+ int ok = ((f = fopen (file, "w"))
+ && fclose (f) == 0
+ && utimes (file, timeval) == 0
+ && lstat (file, &sbuf) == 0
+ && sbuf.st_atime == timeval[0].tv_sec
+ && sbuf.st_mtime == timeval[1].tv_sec);
+ unlink (file);
+ if (!ok)
+ exit (1);
+
+ ok =
+ ((f = fopen (file, "w"))
+ && fclose (f) == 0
+ && time (&now) != (time_t)-1
+ && utimes (file, NULL) == 0
+ && lstat (file, &sbuf) == 0
+ && now - sbuf.st_atime <= 2
+ && now - sbuf.st_mtime <= 2);
+ unlink (file);
+ if (!ok)
+ exit (1);
+
+ ok = (0 <= (fd = open (file, O_WRONLY|O_CREAT, 0444))
+ && close (fd) == 0
+ && utimes (file, NULL) == 0);
+ unlink (file);
+
+ exit (!ok);
+}
+ ]])],
+ [gl_cv_func_working_utimes=yes],
+ [gl_cv_func_working_utimes=no],
+ [gl_cv_func_working_utimes=no])])
+
+ if test $gl_cv_func_working_utimes = yes; then
+ AC_DEFINE([HAVE_WORKING_UTIMES], 1, [Define if utimes works properly. ])
+ fi
+])
--- /dev/null
+# xalloc.m4 serial 16
+dnl Copyright (C) 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_XALLOC],
+[
+ AC_LIBOBJ([xmalloc])
+
+ gl_PREREQ_XALLOC
+ gl_PREREQ_XMALLOC
+])
+
+# Prerequisites of lib/xalloc.h.
+AC_DEFUN([gl_PREREQ_XALLOC], [
+ AC_REQUIRE([gl_INLINE])
+ :
+])
+
+# Prerequisites of lib/xmalloc.c.
+AC_DEFUN([gl_PREREQ_XMALLOC], [
+ :
+])
--- /dev/null
+# yesno.m4 serial 5
+dnl Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_YESNO],
+[
+ AC_LIBOBJ([yesno])
+
+ dnl No prerequisites of lib/yesno.c.
+ :
+])
+++ /dev/null
-/* match.s -- optional optimized asm version of longest match in deflate.c
- * Copyright (C) 2002 Free Software Foundation, Inc.
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- *
- * The 68020 version has been written by Francesco Potorti` <pot@cnuce.cnr.it>
- * with adaptations by Carsten Steger <stegerc@informatik.tu-muenchen.de>,
- * Andreas Schwab <schwab@lamothe.informatik.uni-dortmund.de> and
- * Kristoffer Eriksson <ske@pkmab.se>
- *
- * The ia64 version has been written by Sverre Jarp (HP Labs) 2001-2002.
- * Unwind directives and some reformatting for better readability added by
- * David Mosberger-Tang <davidm@hpl.hp.com>.
- */
-
-/* $Id: match.S,v 0.14 1993/06/11 18:33:24 jloup Exp $ */
-
-/* Preprocess with -DNO_UNDERLINE if your C compiler does not prefix
- * external symbols with an underline character '_'.
- */
-#ifdef NO_UNDERLINE
-# define _prev prev
-# define _window window
-# define _match_start match_start
-# define _prev_length prev_length
-# define _good_match good_match
-# define _nice_match nice_match
-# define _strstart strstart
-# define _max_chain_length max_chain_length
-
-# define _match_init match_init
-# define _longest_match longest_match
-#endif
-
-#ifdef DYN_ALLOC
- error: DYN_ALLOC not yet supported in match.s
-#endif
-
-#if defined(i386) || defined(_I386) || defined(__i386) || defined(__i386__)
-
-/* This version is for 386 Unix or OS/2 in 32 bit mode.
- * Warning: it uses the AT&T syntax: mov source,dest
- * This file is only optional. If you want to force the C version,
- * add -DNO_ASM to CFLAGS in Makefile and set OBJA to an empty string.
- * If you have reduced WSIZE in gzip.h, then change its value below.
- * This version assumes static allocation of the arrays (-DDYN_ALLOC not used).
- */
-
- .file "match.S"
-
-#define MAX_MATCH 258
-#define MAX_MATCH2 $128 /* MAX_MATCH/2-1 */
-#define MIN_MATCH 3
-#define WSIZE $32768
-#define MAX_DIST WSIZE - MAX_MATCH - MIN_MATCH - 1
-
- .globl _match_init
- .globl _longest_match
-
- .text
-
-_match_init:
- ret
-
-/*-----------------------------------------------------------------------
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- */
-
-_longest_match: /* int longest_match(cur_match) */
-
-#define cur_match 20(%esp)
- /* return address */ /* esp+16 */
- push %ebp /* esp+12 */
- push %edi /* esp+8 */
- push %esi /* esp+4 */
- push %ebx /* esp */
-
-/*
- * match equ esi
- * scan equ edi
- * chain_length equ ebp
- * best_len equ ebx
- * limit equ edx
- */
- mov cur_match,%esi
- mov _max_chain_length,%ebp /* chain_length = max_chain_length */
- mov _strstart,%edi
- mov %edi,%edx
- sub MAX_DIST,%edx /* limit = strstart-MAX_DIST */
- jae limit_ok
- sub %edx,%edx /* limit = NIL */
-limit_ok:
- add $2+_window,%edi /* edi = offset(window+strstart+2) */
- mov _prev_length,%ebx /* best_len = prev_length */
- movw -3(%ebx,%edi),%ax /* ax = scan[best_len-1..best_len] */
- movw -2(%edi),%cx /* cx = scan[0..1] */
- cmp _good_match,%ebx /* do we have a good match already? */
- jb do_scan
- shr $2,%ebp /* chain_length >>= 2 */
- jmp do_scan
-
- .align 4
-long_loop:
-/* at this point, edi == scan+2, esi == cur_match */
- movw -3(%ebx,%edi),%ax /* ax = scan[best_len-1..best_len] */
- movw -2(%edi),%cx /* cx = scan[0..1] */
-short_loop:
-/*
- * at this point, di == scan+2, si == cur_match,
- * ax = scan[best_len-1..best_len] and cx = scan[0..1]
- */
- and WSIZE-1, %esi
- movw _prev(%esi,%esi),%si /* cur_match = prev[cur_match] */
- /* top word of esi is still 0 */
- cmp %edx,%esi /* cur_match <= limit ? */
- jbe the_end
- dec %ebp /* --chain_length */
- jz the_end
-do_scan:
- cmpw _window-1(%ebx,%esi),%ax/* check match at best_len-1 */
- jne short_loop
- cmpw _window(%esi),%cx /* check min_match_length match */
- jne short_loop
-
- lea _window+2(%esi),%esi /* si = match */
- mov %edi,%eax /* ax = scan+2 */
- mov MAX_MATCH2,%ecx /* scan for at most MAX_MATCH bytes */
- rep; cmpsw /* loop until mismatch */
- je maxmatch /* match of length MAX_MATCH? */
-mismatch:
- movb -2(%edi),%cl /* mismatch on first or second byte? */
- subb -2(%esi),%cl /* cl = 0 if first bytes equal */
- xchg %edi,%eax /* edi = scan+2, eax = end of scan */
- sub %edi,%eax /* eax = len */
- sub %eax,%esi /* esi = cur_match + 2 + offset(window) */
- sub $2+_window,%esi /* esi = cur_match */
- subb $1,%cl /* set carry if cl == 0 (cannot use DEC) */
- adc $0,%eax /* eax = carry ? len+1 : len */
- cmp %ebx,%eax /* len > best_len ? */
- jle long_loop
- mov %esi,_match_start /* match_start = cur_match */
- mov %eax,%ebx /* ebx = best_len = len */
- cmp _nice_match,%eax /* len >= nice_match ? */
- jl long_loop
-the_end:
- mov %ebx,%eax /* result = eax = best_len */
- pop %ebx
- pop %esi
- pop %edi
- pop %ebp
- ret
-maxmatch:
- cmpsb
- jmp mismatch
-
-#else
-
-/* ======================== 680x0 version ================================= */
-
-#if defined(m68k)||defined(mc68k)||defined(__mc68000__)||defined(__MC68000__)
-# ifndef mc68000
-# define mc68000
-# endif
-#endif
-
-#if defined(__mc68020__) || defined(__MC68020__) || defined(sysV68)
-# ifndef mc68020
-# define mc68020
-# endif
-#endif
-
-#if defined(mc68020) || defined(mc68000)
-
-#if (defined(mc68020) || defined(NeXT)) && !defined(UNALIGNED_OK)
-# define UNALIGNED_OK
-#endif
-
-#ifdef sysV68 /* Try Motorola Delta style */
-
-# define GLOBAL(symbol) global symbol
-# define TEXT text
-# define FILE(filename) file filename
-# define invert_maybe(src,dst) dst,src
-# define imm(data) &data
-# define reg(register) %register
-
-# define addl add.l
-# define addql addq.l
-# define blos blo.b
-# define bhis bhi.b
-# define bras bra.b
-# define clrl clr.l
-# define cmpmb cmpm.b
-# define cmpw cmp.w
-# define cmpl cmp.l
-# define lslw lsl.w
-# define lsrl lsr.l
-# define movel move.l
-# define movew move.w
-# define moveb move.b
-# define moveml movem.l
-# define subl sub.l
-# define subw sub.w
-# define subql subq.l
-
-# define IndBase(bd,An) (bd,An)
-# define IndBaseNdxl(bd,An,Xn) (bd,An,Xn.l)
-# define IndBaseNdxw(bd,An,Xn) (bd,An,Xn.w)
-# define predec(An) -(An)
-# define postinc(An) (An)+
-
-#else /* default style (Sun 3, NeXT, Amiga, Atari) */
-
-# define GLOBAL(symbol) .globl symbol
-# define TEXT .text
-# define FILE(filename) .even
-# define invert_maybe(src,dst) src,dst
-# if defined(sun) || defined(mc68k)
-# define imm(data) #data
-# else
-# define imm(data) \#data
-# endif
-# define reg(register) register
-
-# define blos bcss
-# if defined(sun) || defined(mc68k)
-# define movel movl
-# define movew movw
-# define moveb movb
-# endif
-# define IndBase(bd,An) An@(bd)
-# define IndBaseNdxl(bd,An,Xn) An@(bd,Xn:l)
-# define IndBaseNdxw(bd,An,Xn) An@(bd,Xn:w)
-# define predec(An) An@-
-# define postinc(An) An@+
-
-#endif /* styles */
-
-#define Best_Len reg(d0) /* unsigned */
-#define Cur_Match reg(d1) /* Ipos */
-#define Loop_Counter reg(d2) /* int */
-#define Scan_Start reg(d3) /* unsigned short */
-#define Scan_End reg(d4) /* unsigned short */
-#define Limit reg(d5) /* IPos */
-#define Chain_Length reg(d6) /* unsigned */
-#define Scan_Test reg(d7)
-#define Scan reg(a0) /* *uch */
-#define Match reg(a1) /* *uch */
-#define Prev_Address reg(a2) /* *Pos */
-#define Scan_Ini reg(a3) /* *uch */
-#define Match_Ini reg(a4) /* *uch */
-#define Stack_Pointer reg(sp)
-
-#define MAX_MATCH 258
-#define MIN_MATCH 3
-#define WSIZE 32768
-#define MAX_DIST (WSIZE - MAX_MATCH - MIN_MATCH - 1)
-
- GLOBAL (_match_init)
- GLOBAL (_longest_match)
-
- TEXT
-
- FILE ("match.S")
-
-_match_init:
- rts
-
-/*-----------------------------------------------------------------------
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- */
-
-/* int longest_match (cur_match) */
-
-#ifdef UNALIGNED_OK
-# define pushreg 15928 /* d2-d6/a2-a4 */
-# define popreg 7292
-#else
-# define pushreg 16184 /* d2-d7/a2-a4 */
-# define popreg 7420
-#endif
-
-_longest_match:
- movel IndBase(4,Stack_Pointer),Cur_Match
- moveml imm(pushreg),predec(Stack_Pointer)
- movel _max_chain_length,Chain_Length
- movel _prev_length,Best_Len
- movel imm(_prev),Prev_Address
- movel imm(_window+MIN_MATCH),Match_Ini
- movel _strstart,Limit
- movel Match_Ini,Scan_Ini
- addl Limit,Scan_Ini
- subw imm(MAX_DIST),Limit
- bhis L__limit_ok
- clrl Limit
-L__limit_ok:
- cmpl invert_maybe(_good_match,Best_Len)
- blos L__length_ok
- lsrl imm(2),Chain_Length
-L__length_ok:
- subql imm(1),Chain_Length
-#ifdef UNALIGNED_OK
- movew IndBase(-MIN_MATCH,Scan_Ini),Scan_Start
- movew IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
-#else
- moveb IndBase(-MIN_MATCH,Scan_Ini),Scan_Start
- lslw imm(8),Scan_Start
- moveb IndBase(-MIN_MATCH+1,Scan_Ini),Scan_Start
- moveb IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
- lslw imm(8),Scan_End
- moveb IndBaseNdxw(-MIN_MATCH,Scan_Ini,Best_Len),Scan_End
-#endif
- bras L__do_scan
-
-L__long_loop:
-#ifdef UNALIGNED_OK
- movew IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
-#else
- moveb IndBaseNdxw(-MIN_MATCH-1,Scan_Ini,Best_Len),Scan_End
- lslw imm(8),Scan_End
- moveb IndBaseNdxw(-MIN_MATCH,Scan_Ini,Best_Len),Scan_End
-#endif
-
-L__short_loop:
- lslw imm(1),Cur_Match
- movew IndBaseNdxl(0,Prev_Address,Cur_Match),Cur_Match
- cmpw invert_maybe(Limit,Cur_Match)
- dbls Chain_Length,L__do_scan
- bras L__return
-
-L__do_scan:
- movel Match_Ini,Match
- addl Cur_Match,Match
-#ifdef UNALIGNED_OK
- cmpw invert_maybe(IndBaseNdxw(-MIN_MATCH-1,Match,Best_Len),Scan_End)
- bne L__short_loop
- cmpw invert_maybe(IndBase(-MIN_MATCH,Match),Scan_Start)
- bne L__short_loop
-#else
- moveb IndBaseNdxw(-MIN_MATCH-1,Match,Best_Len),Scan_Test
- lslw imm(8),Scan_Test
- moveb IndBaseNdxw(-MIN_MATCH,Match,Best_Len),Scan_Test
- cmpw invert_maybe(Scan_Test,Scan_End)
- bne L__short_loop
- moveb IndBase(-MIN_MATCH,Match),Scan_Test
- lslw imm(8),Scan_Test
- moveb IndBase(-MIN_MATCH+1,Match),Scan_Test
- cmpw invert_maybe(Scan_Test,Scan_Start)
- bne L__short_loop
-#endif
-
- movew imm((MAX_MATCH-MIN_MATCH+1)-1),Loop_Counter
- movel Scan_Ini,Scan
-L__scan_loop:
- cmpmb postinc(Match),postinc(Scan)
- dbne Loop_Counter,L__scan_loop
-
- subl Scan_Ini,Scan
- addql imm(MIN_MATCH-1),Scan
- cmpl invert_maybe(Best_Len,Scan)
- bls L__short_loop
- movel Scan,Best_Len
- movel Cur_Match,_match_start
- cmpl invert_maybe(_nice_match,Best_Len)
- blos L__long_loop
-L__return:
- moveml postinc(Stack_Pointer),imm(popreg)
- rts
-
-#else
-
-# if defined (__ia64__)
-
-/* ======================== ia64 version ================================= */
-
-/*
- * 'longest_match.S' (assembly program for gzip for the IA-64 architecture)
- *
- * Optimised for McKinley, but with Merced-compatibility, such as MIB+MIB, used wherever
- * possible.
- *
- * Copyright: Sverre Jarp (HP Labs) 2001-2002
- *
- * See deflate.c for c-version
- * Version 2 - Optimize the outer loop
- */
-
-#include <endian.h>
-
-#if __BYTE_ORDER == ____BIG_ENDIAN
-#define first shl
-#define second shr.u
-#define count czx1.l
-#else
-#define first shr.u
-#define second shl
-#define count czx1.r
-#endif
-
-// 24 rotating register (r32 - r55)
-
-#define s_vmatch0 r32
-#define s_vmatch1 r33
-#define s_vmatbst r34
-#define s_vmatbst1 r35
-#define s_amatblen r36
-
-#define s_tm1 r56
-#define s_tm2 r57
-#define s_tm3 r58
-#define s_tm4 r59
-#define s_tm5 r60
-#define s_tm6 r61
-#define s_tm7 r62
-#define s_tm8 r63
-
-#define s_vlen r31
-#define s_vstrstart r30
-#define s_vchainlen r29
-#define s_awinbest r28
-#define s_vcurmatch r27
-#define s_vlimit r26
-#define s_vscanend r25
-#define s_vscanend1 r24
-#define s_anicematch r23
-#define s_vscan0 r22
-#define s_vscan1 r21
-
-#define s_aprev r20
-#define s_awindow r19
-#define s_amatchstart r18
-#define s_ascan r17
-#define s_amatch r16
-#define s_wmask r15
-#define s_ascanend r14
-
-#define s_vspec_cmatch r11 // next iteration
-#define s_lcsave r10
-#define s_prsave r9
-#define s_vbestlen r8 // return register
-
-#define s_vscan3 r3
-#define s_vmatch3 r2
-
-#define p_no p2
-#define p_yes p3
-#define p_shf p4 //
-#define p_bn2 p5 // Use in loop (indicating bestlen != 2)
-
-#define p_nbs p9 // not new best_len
-#define p_nnc p10 // not nice_length
-#define p_ll p11
-#define p_end p12
-
-#define MAX_MATCH 258
-#define MIN_MATCH 4
-#define WSIZE 32768
-#define MAX_DIST WSIZE - MAX_MATCH - MIN_MATCH - 1
-
-#define R_INPUT 1
-#define R_LOCAL 31
-#define R_OUTPUT 0
-#define R_ROTATING 24
-#define MLAT 3
-#define SHLAT 2
-
-#define mova mov
-#define movi0 mov
-#define cgtu cmp.gt.unc
-#define cgeu cmp.ge.unc
-#define cneu cmp.ne.unc
-
- .global longest_match
- .proc longest_match
- .align 32
-longest_match:
-// -- Cycle: 0
- .prologue
-{.mmi
- alloc r2=ar.pfs,R_INPUT,R_LOCAL,R_OUTPUT,R_ROTATING
- .rotr scan[MLAT+2], match[MLAT+2], shscan0[SHLAT+1], \
- shscan1[SHLAT+1], shmatch0[SHLAT+1], shmatch1[SHLAT+1]
- .rotp lc[MLAT+SHLAT+2]
- mova s_vspec_cmatch=in0 // cur_match from input register
- add s_tm1=@gprel(strstart),gp // a(a(strstart))
-}{.mmi
- add s_tm3=@gprel(prev_length),gp // a(a(prev_length))
- add s_tm5=@ltoff(window),gp // a(a(window))
- add s_tm6=@ltoff(prev),gp // a(a(prev))
- ;;
-}{.mmb // Cycle: 1
- ld4 s_vstrstart=[s_tm1] // strstart
- ld4 s_vbestlen=[s_tm3] // best_len = prev_length
- brp.loop.imp .cmploop,.cmploop+48
-}{.mli
- add s_tm2=@gprel(max_chain_length),gp // a(a(max_chain_length))
- movl s_wmask=WSIZE-1
- ;;
-}{.mmi // Cycle: 2
- ld8 s_aprev=[s_tm6] // a(prev)
- ld8 s_awindow=[s_tm5] // a(window)
- .save pr, s_prsave
- movi0 s_prsave=pr // save predicates
-}{.mmi
- add s_tm4=@gprel(good_match),gp // a(a(good_match))
- add s_tm7=@ltoff(nice_match),gp // a(a(nice_match))
- add s_tm8=@ltoff(match_start),gp // a(match_start)
- ;;
-}{.mmi // Cycle: 3
- ld8 s_anicematch=[s_tm7] // a(nice_match)
- ld8 s_amatchstart=[s_tm8] // a(match_start)
- .save ar.lc, s_lcsave
- movi0 s_lcsave=ar.lc // save loop count register
-}{.mmi
- .body
- add s_tm1=-(MAX_MATCH + MIN_MATCH),s_wmask // maxdist
- cmp.eq p_ll,p0=r0,r0 // parallel compare initialized as 'true'
- mova s_vcurmatch=s_vspec_cmatch
- ;;
-}{.mmi // Cycle: 4
- ld4 s_vchainlen=[s_tm2] // chain_length=max_chain_length
- ld4 s_tm4=[s_tm4] // v(good_match)
- add s_ascan=s_awindow,s_vstrstart // scan=window + strstart
-}{.mmi
- sub s_vlimit=s_vstrstart, s_tm1 // limit=strstart - MAX_DIST
- add s_amatch=s_awindow,s_vspec_cmatch // match=window + cur_match
- and s_vspec_cmatch =s_vspec_cmatch,s_wmask
- ;;
-}{.mmi // Cycle: 5
- add s_amatblen=s_amatch,s_vbestlen //
- cneu p_bn2,p0=2,s_vbestlen // set if bestlen != 2
- add s_ascanend=s_ascan,s_vbestlen // compute a(scan) + best_len
-}{.mmi
- ld1 s_vscan0=[s_ascan],1 // NB: s_ascan++
- ld1 s_vmatch0=[s_amatch],1
- cgtu p0,p_no=s_vlimit,r0 // is result positive ?
- ;;
-}{.mmi // Cycle: 6
- ld1.nt1 s_vscan1=[s_ascan],2 // NB: s_ascan+3 in total
- ld1.nt1 s_vmatch1=[s_amatch],2
- add s_awinbest=s_awindow,s_vbestlen //
- ;;
-}{.mmi // Cycle: 7
- ld1.nt1 s_vscanend=[s_ascanend],-1 // scan_end=scan[best_len]
- ld1.nt1 s_vmatbst=[s_amatblen],-1
-(p_no) mova s_vlimit=r0
- ;;
-}{.mmi // Cycle: 8
-(p_bn2) ld1.nt1 s_vscanend1=[s_ascanend],1 // scan_end1=scan[best_len-1]
-(p_bn2) ld1.nt1 s_vmatbst1=[s_amatblen]
- shladd s_vspec_cmatch =s_vspec_cmatch,1,s_aprev
-}{.mmi
- cgeu p_shf,p0=s_vbestlen,s_tm4 // is (prev_length >= good_match) ?
- ;;
-}{.mmi // Cycle: 9
- ld1.nt1 s_vscan3=[s_ascan]
- ld2.nt1 s_vspec_cmatch=[s_vspec_cmatch]
- mova s_vlen=3
-}{.mmi
-(p_shf) shr.u s_vchainlen=s_vchainlen,2 // (cur_len) >> 2
- ;;
-}{.mmi // Cycle: 10
- ld1.nt1 s_vmatch3=[s_amatch]
- // p_ll switched on as soon as we get a mismatch:
- cmp.eq.and p_ll,p0=s_vmatch0,s_vscan0
- cmp.eq.and p_ll,p0=s_vmatbst,s_vscanend
-}{.mib
- cmp.eq.and p_ll,p0=s_vmatch1,s_vscan1
-(p_bn2) cmp.eq.and p_ll,p0=s_vmatbst1,s_vscanend1
-(p_ll) br.cond.dpnt.many .test_more
- ;;
-}
-
-.next_iter:
-{.mmi // Cycle 0
- add s_amatch=s_awindow,s_vspec_cmatch // match=window + cur_match
- mov s_vcurmatch=s_vspec_cmatch // current value
- add s_vchainlen=-1,s_vchainlen // --chain_length
-}{.mib
- cmp.le.unc p_end,p0=s_vspec_cmatch,s_vlimit
- and s_vspec_cmatch=s_vspec_cmatch,s_wmask
-(p_end) br.cond.dptk.many .terminate
- ;;
-}{.mmi // Cycle 1
- ld1 s_vmatch0=[s_amatch],1 // load match[0]
- // compute prev[cur_match]:
- shladd s_vspec_cmatch=s_vspec_cmatch,1,s_aprev
- cmp.eq.unc p_end,p0=s_vchainlen,r0
-} {.mib
- nop.m 0
- add s_amatblen=s_awinbest,s_vcurmatch // match=window + cur_match
-(p_end) br.cond.dptk.many .terminate
- ;;
-}{.mmi // Cycle 2 (short)
- ld2.nt1 s_vspec_cmatch=[s_vspec_cmatch] // get next cur_match
- ;;
-}{.mmi // Cycle 3 (short)
- ld1.nt1 s_vmatbst=[s_amatblen],-1 // load match[best_len]
- cmp.ne.unc p_ll,p0=r0,r0 // parallel compare initialized as 'false'
- ;;
-}{.mmi // Cycle 4 (short)
- // load match[1] - - note: match += 3 (in total):
- ld1.nt1 s_vmatch1=[s_amatch],2
- ;;
- // Cycle 5 (short)
-(p_bn2) ld1.nt1 s_vmatbst1=[s_amatblen] // load match[best_len-1]
-}{.mib // Here we (MOST LIKELY) pay a L2-fetch stall
- // p_ll switched on as soon as we get a mismatch:
- cmp.ne.or p_ll,p0=s_vmatch0,s_vscan0
- cmp.ne.or p_ll,p0=s_vmatbst,s_vscanend
-(p_ll) br.cond.dptk.many .next_iter
- ;;
-}{.mmi // Cycle 6
- ld1.nt1 s_vmatch3=[s_amatch]
- mova s_vlen=3
- nop.i 0
-}{.mib
- cmp.ne.or p_ll,p0=s_vmatch1,s_vscan1
-(p_bn2) cmp.ne.or p_ll,p0=s_vmatbst1,s_vscanend1
-(p_ll) br.cond.dptk.many .next_iter
- ;;
-}
-
-// We have passed the first hurdle - Are there additional matches ???
-
-.test_more:
-{.mmi // Cycle 0
- and s_tm3=7,s_ascan // get byte offset
- and s_tm4=7,s_amatch // get byte offset
- movi0 ar.ec=MLAT+SHLAT+2 // NB: One trip more than usual
-}{.mib
- cmp.ne.unc p_no,p0=s_vscan3,s_vmatch3 // does not next one differ?
-(p_no) br.cond.dptk.many .only3
- ;;
-}{.mmi // Cycle 1
- and s_tm1=-8,s_ascan // get aligned address
- shladd s_tm3=s_tm3,3,r0
- movi0 ar.lc=31 // 32 times around the loop (8B at a time)
-}{.mib
- and s_tm2=-8,s_amatch // get aligned address
- shladd s_tm4=s_tm4,3,r0
- nop.b 0
- ;;
-}{.mmi // Cycle 2
- ld8.nt1 scan[1]=[s_tm1],8 // load first chunk
- sub s_tm5=64,s_tm3 // 64 - amount
- movi0 pr.rot=1<<16
-}{.mmi
- ld8.nt1 match[1]=[s_tm2],8 // load first chunk
- sub s_tm6=64,s_tm4 // 64 - amount
- add s_vlen=-8,s_vlen // will be updated at least once
- ;;
-}
- .align 32
-.cmploop:
-{.mmi // Cycle 0
-(lc[0]) ld8 scan[0]=[s_tm1],8 // next scan chunk
-(lc[MLAT+SHLAT+1]) add s_vlen=8,s_vlen
-(lc[MLAT]) first shscan0[0]=scan[MLAT+1],s_tm3
-}{.mib
-(lc[MLAT+SHLAT+1]) cmp.ne.unc p_no,p0=s_tm7,s_tm8 // break search if !=
-(lc[MLAT]) first shmatch0[0]=match[MLAT+1],s_tm4
-(p_no) br.cond.dpnt.many .mismatch
- ;;
-}{.mii // Cycle 1
-(lc[0]) ld8 match[0]=[s_tm2],8
- // shift left(le) or right(be):
-(lc[MLAT]) second shscan1[0]=scan[MLAT],s_tm5
-(lc[MLAT]) second shmatch1[0]=match[MLAT],s_tm6
-}{.mmb
-(lc[MLAT+SHLAT]) or s_tm7=shscan0[SHLAT],shscan1[SHLAT]
-(lc[MLAT+SHLAT]) or s_tm8=shmatch0[SHLAT],shmatch1[SHLAT]
- br.ctop.dptk.many .cmploop
- ;;
-}{.mfi
- mov s_vlen=258
- nop.f 0
-}{.mfi
- nop.f 0 // realign
- ;;
-}
-.mismatch:
-{.mii // Cycle 0 (short)
-(p_no) pcmp1.eq s_tm2=s_tm7,s_tm8 // find first non-matching character
- nop.i 0
- ;;
- // Cycle 1 (short)
-(p_no) count s_tm1=s_tm2
- ;;
-}{.mib // Cycle 2 (short)
-(p_no) add s_vlen=s_vlen,s_tm1 // effective length
- nop.i 0
- clrrrb
- ;;
-}
-
-.only3:
-{.mib // Cycle 0 (short)
- cmp.gt.unc p0,p_nbs=s_vlen,s_vbestlen // (len > best_len) ?
-(p_nbs) br.cond.dpnt.many .next_iter // if not, re-iternate
- ;;
-}{.mmi // Cycle 1 (short)
- ld4 s_tm7=[s_anicematch] // nice_match
- st4 [s_amatchstart]= s_vcurmatch
- add s_ascanend=s_ascan,s_vlen // reset with best_len
- ;;
-}{.mmi // Cycle 2 (short)
- mova s_vbestlen=s_vlen
- add s_ascanend=-3,s_ascanend // remember extra offset
- ;;
-}{.mmi // Cycle 3 (short)
- ld1 s_vscanend=[s_ascanend],-1 // scan_end=scan[best_len]
- add s_awinbest=s_awindow,s_vbestlen // update with new best_len
- cmp.ne.unc p_bn2,p0=2,s_vbestlen // set if bestlen != 2
- ;;
-}{.mib // Cycle 4 (short)
- // scan_end1=scan[best_len-1] NB: s_ascanend reset:
- ld1.nt1 s_vscanend1=[s_ascanend],1
- cmp.lt.unc p_nnc,p0=s_vlen,s_tm7 // compare with nice_match
-(p_nnc) br.cond.dptk.many .next_iter
- ;;
-}
-.terminate:
-{.mii // Cycle 0/1
- nop.m 0
- movi0 ar.lc=s_lcsave
- movi0 pr=s_prsave,-1
-}{.mbb
- nop.m 0
- nop.b 0
- br.ret.sptk.many rp // ret0 is identical to best_len
- ;;
-}
- .endp
-
- .global match_init
- .proc match_init
-match_init:
- sub ret0=ret0,ret0
- br.ret.sptk.many rp
- .endp
-
-# else
- error: this asm version is for 386 or 680x0 or ia64 only
-# endif /* __ia64__ */
-#endif /* mc68000 || mc68020 */
-#endif /* i386 || _I386 */
+++ /dev/null
-#!/bin/sh
-# Get modification time of a file or directory and pretty-print it.
-# Copyright 1995, 1996, 1997 Free Software Foundation, Inc.
-# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Prevent date giving response in another language.
-LANG=C
-export LANG
-LC_ALL=C
-export LC_ALL
-LC_TIME=C
-export LC_TIME
-
-# Get the extended ls output of the file or directory.
-# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-if ls -L /dev/null 1>/dev/null 2>&1; then
- set - x`ls -L -l -d $1`
-else
- set - x`ls -l -d $1`
-fi
-# The month is at least the fourth argument
-# (3 shifts here, the next inside the loop).
-shift
-shift
-shift
-
-# Find the month. Next argument is day, followed by the year or time.
-month=
-until test $month
-do
- shift
- case $1 in
- Jan) month=January; nummonth=1;;
- Feb) month=February; nummonth=2;;
- Mar) month=March; nummonth=3;;
- Apr) month=April; nummonth=4;;
- May) month=May; nummonth=5;;
- Jun) month=June; nummonth=6;;
- Jul) month=July; nummonth=7;;
- Aug) month=August; nummonth=8;;
- Sep) month=September; nummonth=9;;
- Oct) month=October; nummonth=10;;
- Nov) month=November; nummonth=11;;
- Dec) month=December; nummonth=12;;
- esac
-done
-
-day=$2
-
-# Here we have to deal with the problem that the ls output gives either
-# the time of day or the year.
-case $3 in
- *:*) set `date`; eval year=\$$#
- case $2 in
- Jan) nummonthtod=1;;
- Feb) nummonthtod=2;;
- Mar) nummonthtod=3;;
- Apr) nummonthtod=4;;
- May) nummonthtod=5;;
- Jun) nummonthtod=6;;
- Jul) nummonthtod=7;;
- Aug) nummonthtod=8;;
- Sep) nummonthtod=9;;
- Oct) nummonthtod=10;;
- Nov) nummonthtod=11;;
- Dec) nummonthtod=12;;
- esac
- # For the first six month of the year the time notation can also
- # be used for files modified in the last year.
- if (expr $nummonth \> $nummonthtod) > /dev/null;
- then
- year=`expr $year - 1`
- fi;;
- *) year=$3;;
-esac
-
-# The result.
-echo $day $month $year
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-case "$1" in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
- aclocal*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case "$f" in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if [ ! -f y.tab.h ]; then
- echo >y.tab.h
- fi
- if [ ! -f y.tab.c ]; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if [ ! -f lex.yy.c ]; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
- fi
- touch $file
- ;;
-
- tar)
- shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case "$firstarg" in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case "$firstarg" in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequirements for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
- case "${1}" in
- -h | --help | --h* ) # -h for help
- echo "${usage}" 1>&2; exit 0 ;;
- -m ) # -m PERM arg
- shift
- test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
- dirmode="${1}"
- shift ;;
- -- ) shift; break ;; # stop option processing
- -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option
- * ) break ;; # first non-opt arg
- esac
-done
-
-for file
-do
- if test -d "$file"; then
- shift
- else
- break
- fi
-done
-
-case $# in
-0) exit 0 ;;
-esac
-
-case $dirmode in
-'')
- if mkdir -p -- . 2>/dev/null; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- fi ;;
-*)
- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- fi ;;
-esac
-
-for file
-do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
-
- lasterr=""
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
- fi
- fi
- fi
-
- pathcomp="$pathcomp/"
- done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 3
-# End:
-# mkinstalldirs ends here
/* revision.h -- define the version number
- * Copyright (C) 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1998, 1999, 2001, 2002, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
#define PATCHLEVEL 0
#define REVDATE "2002-09-30"
# undef LZW
#endif
-/* $Id: revision.h,v 0.25 1993/06/24 08:29:52 jloup Exp $ */
+/* $Id: revision.h,v 1.4 2006/11/20 08:40:33 eggert Exp $ */
+++ /dev/null
-/* Determine whether string value is affirmation or negative response
- according to current locale's data.
- Copyright (C) 1996, 1998, 2000 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#if STDC_HEADERS || _LIBC
-# include <stddef.h>
-# include <stdlib.h>
-#else
-# ifndef NULL
-# define NULL 0
-# endif
-#endif
-
-#if ENABLE_NLS
-# include <sys/types.h>
-# if HAVE_LIMITS_H
-# include <limits.h>
-# endif
-# include <regex.h>
-# include <libintl.h>
-# define _(Text) gettext (Text)
-
-static int
-try (const char *response, const char *pattern, const int match,
- const int nomatch, const char **lastp, regex_t *re)
-{
- if (pattern != *lastp)
- {
- /* The pattern has changed. */
- if (*lastp)
- {
- /* Free the old compiled pattern. */
- regfree (re);
- *lastp = NULL;
- }
- /* Compile the pattern and cache it for future runs. */
- if (regcomp (re, pattern, REG_EXTENDED) != 0)
- return -1;
- *lastp = pattern;
- }
-
- /* See if the regular expression matches RESPONSE. */
- return regexec (re, response, 0, NULL, 0) == 0 ? match : nomatch;
-}
-#endif
-
-
-int
-rpmatch (const char *response)
-{
-#if ENABLE_NLS
- /* Match against one of the response patterns, compiling the pattern
- first if necessary. */
-
- /* We cache the response patterns and compiled regexps here. */
- static const char *yesexpr, *noexpr;
- static regex_t yesre, nore;
- int result;
-
- return ((result = try (response, _("^[yY]"), 1, 0,
- &yesexpr, &yesre))
- ? result
- : try (response, _("^[nN]"), 0, -1, &noexpr, &nore));
-#else
- /* Test against "^[yY]" and "^[nN]", hardcoded to avoid requiring regex */
- return (*response == 'y' || *response == 'Y' ? 1
- : *response == 'n' || *response == 'N' ? 0 : -1);
-#endif
-}
+++ /dev/null
-@set UPDATED 29 September 2002
-@set UPDATED-MONTH September 2002
-@set EDITION 1.3.5
-@set VERSION 1.3.5
/* tailor.h -- target dependent definitions
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1997, 1998, 1999, 2002, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
/* The target dependent definitions should be defined here only.
* The target dependent functions should be defined in tailor.c.
*/
-/* $Id: tailor.h,v 0.18 1993/06/14 19:32:20 jloup Exp $ */
+/* $Id: tailor.h,v 1.5 2006/12/07 06:58:13 eggert Exp $ */
#if defined(__MSDOS__) && !defined(MSDOS)
# define MSDOS
# define off_t long
# ifdef __BORLANDC__
# define HAVE_DIRENT_H
-# define HAVE_UTIME
# endif
# define HAVE_UTIME_H
# else /* MSC */
#ifdef __50SERIES /* Prime/PRIMOS */
# define PATH_SEP '>'
# define STDC_HEADERS
-# define NO_STDIN_FSTAT
-# define NO_SIZE_CHECK
+# define NO_STDIN_FSTAT
+# define NO_SIZE_CHECK
# define RECORD_IO 1
# define casemap(c) tolow(c) /* Force file names to lower case */
# define put_char(c) put_byte((c) & 0x7F)
# define OS_CODE 0x0a
#endif
-#ifndef unix
-# define NO_ST_INO /* don't rely on inode numbers */
-#endif
-
/* Common defaults */
#endif
#ifndef OPEN
-# define OPEN(name, flags, mode) open(name, flags, mode)
+# define OPEN(name, flags, mode) open_safer (name, flags, mode)
#endif
#ifndef get_char
+++ /dev/null
-% texinfo.tex -- TeX macros to handle Texinfo files.
-%
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{2002-09-29.15}
-%
-% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
-% 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
-%
-% This texinfo.tex file is free software; you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-% Boston, MA 02111-1307, USA.
-%
-% In other words, you are welcome to use, share and improve this program.
-% You are forbidden to forbid anyone else to use, share and improve
-% what you give them. Help stamp out software-hoarding!
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-% ftp://ftp.gnu.org/gnu/texinfo.tex
-% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
-% ftp://texinfo.org/texinfo/texinfo.tex
-% ftp://tug.org/tex/texinfo.tex
-% (and all CTAN mirrors, see http://www.ctan.org),
-% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-%
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-%
-% The texinfo.tex in any given Texinfo distribution could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org. Please include including a
-% complete document in each bug report with which we can reproduce the
-% problem. Patches are, of course, greatly appreciated.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For a simple
-% manual foo.texi, however, you can get away with this:
-% tex foo.texi
-% texindex foo.??
-% tex foo.texi
-% tex foo.texi
-% dvips foo.dvi -o # or whatever; this makes foo.ps.
-% The extra TeX runs get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-%
-% It is possible to adapt texinfo.tex for other languages. You can get
-% the existing language-specific files from the full Texinfo distribution.
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
-% Save some parts of plain tex whose names we will redefine.
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexi=\i
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexstar=\*
-\let\ptext=\t
-
-% We never want plain's outer \+ definition in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-\message{Basics,}
-\chardef\other=12
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordin\undefined \gdef\putwordin{in}\fi
-\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
-\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
-\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
-\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
-\ifx\putwordof\undefined \gdef\putwordof{of}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
-\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
-%
-\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
-\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
-\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
-\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
-\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
-\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
-\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
-\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
-\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
-\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
-\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
-\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
-%
-\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
-\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
-\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
-\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
-\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
-\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-\hyphenation{ap-pen-dix}
-\hyphenation{mini-buf-fer mini-buf-fers}
-\hyphenation{eshell}
-\hyphenation{white-space}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset
-\newdimen \normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\ifx\eTeXversion\undefined
-\def\loggingall{\tracingcommands2 \tracingstats2
- \tracingpages1 \tracingoutput1 \tracinglostchars1
- \tracingmacros2 \tracingparagraphs1 \tracingrestores1
- \showboxbreadth\maxdimen\showboxdepth\maxdimen
-}%
-\else
-\def\loggingall{\tracingcommands3 \tracingstats2
- \tracingpages1 \tracingoutput1 \tracinglostchars1
- \tracingmacros2 \tracingparagraphs1 \tracingrestores1
- \tracingscantokens1 \tracingassigns1 \tracingifs1
- \tracinggroups1 \tracingnesting2
- \showboxbreadth\maxdimen\showboxdepth\maxdimen
-}%
-\fi
-
-% add check for \lastpenalty to plain's definitions. If the last thing
-% we did was a \nobreak, we don't want to insert more space.
-%
-\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
- \removelastskip\penalty-50\smallskip\fi\fi}
-\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
- \removelastskip\penalty-100\medskip\fi\fi}
-\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
- \removelastskip\penalty-200\bigskip\fi\fi}
-
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
-%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
-%
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
-\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
- \ifodd\pageno \advance\hoffset by \bindingoffset
- \else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
- {%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \escapechar = `\\ % use backslash in output files.
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- \shipout\vbox{%
- % Do this early so pdf references go to the beginning of the page.
- \ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
- %
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \vskip-\topandbottommargin
- \vtop to0pt{%
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vss}%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
- \pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \vbox to0pt{\vss
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- }%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \turnoffactive
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha@viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
- \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-% Here are the rules for the cropmarks. Note that they are
-% offset so that the space between them is truly \outerhsize or \outervsize
-% (P. A. MacKay, 12 November, 1986)
-%
-\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
-\def\nstop{\vbox
- {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
-\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
-\def\nsbot{\vbox
- {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-
-% Parse an argument, then pass it to #1. The argument is the rest of
-% the input line (except we remove a trailing comment). #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-%
-\def\parsearg#1{%
- \let\next = #1%
- \begingroup
- \obeylines
- \futurelet\temp\parseargx
-}
-
-% If the next token is an obeyed space (from an @example environment or
-% the like), remove it and recurse. Otherwise, we're done.
-\def\parseargx{%
- % \obeyedspace is defined far below, after the definition of \sepspaces.
- \ifx\obeyedspace\temp
- \expandafter\parseargdiscardspace
- \else
- \expandafter\parseargline
- \fi
-}
-
-% Remove a single space (as the delimiter token to the macro call).
-{\obeyspaces %
- \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
-
-{\obeylines %
- \gdef\parseargline#1^^M{%
- \endgroup % End of the group started in \parsearg.
- %
- % First remove any @c comment, then any @comment.
- % Result of each macro is put in \toks0.
- \argremovec #1\c\relax %
- \expandafter\argremovecomment \the\toks0 \comment\relax %
- %
- % Call the caller's macro, saved as \next in \parsearg.
- \expandafter\next\expandafter{\the\toks0}%
- }%
-}
-
-% Since all \c{,omment} does is throw away the argument, we can let TeX
-% do that for us. The \relax here is matched by the \relax in the call
-% in \parseargline; it could be more or less anything, its purpose is
-% just to delimit the argument to the \c.
-\def\argremovec#1\c#2\relax{\toks0 = {#1}}
-\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
-
-% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
-% @end itemize @c foo
-% will have two active spaces as part of the argument with the
-% `itemize'. Here we remove all active spaces from #1, and assign the
-% result to \toks0.
-%
-% This loses if there are any *other* active characters besides spaces
-% in the argument -- _ ^ +, for example -- since they get expanded.
-% Fortunately, Texinfo does not define any such commands. (If it ever
-% does, the catcode of the characters in questionwill have to be changed
-% here.) But this means we cannot call \removeactivespaces as part of
-% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
-% that \parsearg gets might well have any character at all in it.
-%
-\def\removeactivespaces#1{%
- \begingroup
- \ignoreactivespaces
- \edef\temp{#1}%
- \global\toks0 = \expandafter{\temp}%
- \endgroup
-}
-
-% Change the active space to expand to nothing.
-%
-\begingroup
- \obeyspaces
- \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
-\endgroup
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-%% These are used to keep @begin/@end levels from running away
-%% Call \inENV within environments (after a \begingroup)
-\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
-\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment; press RETURN to continue}
-\endgroup\fi} % This is not perfect, but it should reduce lossage
-
-% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Press RETURN to continue.}
-
-\outer\def\begin{\parsearg\beginxxx}
-
-\def\beginxxx #1{%
-\expandafter\ifx\csname #1\endcsname\relax
-{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
-\csname #1\endcsname\fi}
-
-% @end foo executes the definition of \Efoo.
-%
-\def\end{\parsearg\endxxx}
-\def\endxxx #1{%
- \removeactivespaces{#1}%
- \edef\endthing{\the\toks0}%
- %
- \expandafter\ifx\csname E\endthing\endcsname\relax
- \expandafter\ifx\csname \endthing\endcsname\relax
- % There's no \foo, i.e., no ``environment'' foo.
- \errhelp = \EMsimple
- \errmessage{Undefined command `@end \endthing'}%
- \else
- \unmatchedenderror\endthing
- \fi
- \else
- % Everything's ok; the right environment has been started.
- \csname E\endthing\endcsname
- \fi
-}
-
-% There is an environment #1, but it hasn't been started. Give an error.
-%
-\def\unmatchedenderror#1{%
- \errhelp = \EMsimple
- \errmessage{This `@end #1' doesn't have a matching `@#1'}%
-}
-
-% Define the control sequence \E#1 to give an unmatched @end error.
-%
-\def\defineunmatchedend#1{%
- \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
-}
-
-
-% Single-spacing is done by various environments (specifically, in
-% \nonfillstart and \quotations).
-\newskip\singlespaceskip \singlespaceskip = 12.5pt
-\def\singlespace{%
- % Why was this kern here? It messes up equalizing space above and below
- % environments. --karl, 6may93
- %{\advance \baselineskip by -\singlespaceskip
- %\kern \baselineskip}%
- \setleading\singlespaceskip
-}
-
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
- % Definitions to produce actual \{ & \} command in an index.
- \catcode`\{ = 12 \catcode`\} = 12
- \catcode`\[ = 1 \catcode`\] = 2
- \catcode`\@ = 0 \catcode`\\ = 12
- @gdef@lbracecmd[\{]%
- @gdef@rbracecmd[\}]%
-@endgroup
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown
-% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
- \def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
- \else \errmessage{@dotless can be used only with i or j}%
- \fi\fi
-}
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=3000 }
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=3000 }
-
-% @w prevents a word break. Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line. According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0). If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-\def\group{\begingroup
- \ifnum\catcode13=\active \else
- \errhelp = \groupinvalidhelp
- \errmessage{@group invalid in context where filling is enabled}%
- \fi
- %
- % The \vtop we start below produces a box with normal height and large
- % depth; thus, TeX puts \baselineskip glue before it, and (when the
- % next line of text is done) \lineskip glue after it. (See p.82 of
- % the TeXbook.) Thus, space below is not quite equal to space
- % above. But it's pretty close.
- \def\Egroup{%
- \egroup % End the \vtop.
- \endgroup % End the \group.
- }%
- %
- \vtop\bgroup
- % We have to put a strut on the last line in case the @group is in
- % the midst of an example, rather than completely enclosing it.
- % Otherwise, the interline space between the last line of the group
- % and the first line afterwards is too small. But we can't put the
- % strut in \Egroup, since there it would be on a line by itself.
- % Hence this just inserts a strut at the beginning of each line.
- \everypar = {\strut}%
- %
- % Since we have a strut on every line, we don't need any of TeX's
- % normal interline spacing.
- \offinterlineskip
- %
- % OK, but now we have to do something about blank
- % lines in the input in @example-like environments, which normally
- % just turn into \lisppar, which will insert no space now that we've
- % turned off the interline space. Simplest is to make them be an
- % empty paragraph.
- \ifx\par\lisppar
- \edef\par{\leavevmode \par}%
- %
- % Reset ^^M's definition to new definition of \par.
- \obeylines
- \fi
- %
- % Do @comment since we are called inside an environment such as
- % @example, where each end-of-line in the input causes an
- % end-of-line in the output. We don't want the end-of-line after
- % the `@group' to put extra space in the output. Since @group
- % should appear on a line by itself (according to the Texinfo
- % manual), we don't worry about eating any user text.
- \comment
-}
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil \mil=0.001in
-
-\def\need{\parsearg\needx}
-
-% Old definition--didn't work.
-%\def\needx #1{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
-\def\needx#1{%
- % Ensure vertical mode, so we don't make a big box in the middle of a
- % paragraph.
- \par
- %
- % If the @need value is less than one line space, it's useless.
- \dimen0 = #1\mil
- \dimen2 = \ht\strutbox
- \advance\dimen2 by \dp\strutbox
- \ifdim\dimen0 > \dimen2
- %
- % Do a \strut just to make the height of this box be normal, so the
- % normal leading is inserted relative to the preceding line.
- % And a page break here is fine.
- \vtop to #1\mil{\strut\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
- \fi
-}
-
-% @br forces paragraph break
-
-\let\br = \par
-
-% @dots{} output an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
- \leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \leavevmode
- \hbox to 2em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
- }%
- \spacefactor=3000
-}
-
-
-% @page forces the start of a new page
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\def\exdent{\parsearg\exdentyyy}
-\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
-
-% This defn is used inside nofill environments such as @example.
-\def\nofillexdent{\parsearg\nofillexdentyyy}
-\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
-\leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
-% paragraph. For more general purposes, use the \margin insertion
-% class. WHICH is `l' or `r'.
-%
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-%
-\def\doinmargin#1#2{\strut\vadjust{%
- \nobreak
- \kern-\strutdepth
- \vtop to \strutdepth{%
- \baselineskip=\strutdepth
- \vss
- % if you have multiple lines of stuff to put here, you'll need to
- % make the vbox yourself of the appropriate size.
- \ifx#1l%
- \llap{\ignorespaces #2\hskip\inmarginspacing}%
- \else
- \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
- \fi
- \null
- }%
-}}
-\def\inleftmargin{\doinmargin l}
-\def\inrightmargin{\doinmargin r}
-%
-% @inmargin{TEXT [, RIGHT-TEXT]}
-% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
-% else use TEXT for both).
-%
-\def\inmargin#1{\parseinmargin #1,,\finish}
-\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \def\lefttext{#1}% have both texts
- \def\righttext{#2}%
- \else
- \def\lefttext{#1}% have only one text
- \def\righttext{#1}%
- \fi
- %
- \ifodd\pageno
- \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
- \else
- \def\temp{\inleftmargin\lefttext}%
- \fi
- \temp
-}
-
-% @include file insert text of that file as input.
-% Allow normal characters that we make active in the argument (a file name).
-\def\include{\begingroup
- \catcode`\\=12
- \catcode`~=12
- \catcode`^=12
- \catcode`_=12
- \catcode`|=12
- \catcode`<=12
- \catcode`>=12
- \catcode`+=12
- \parsearg\includezzz}
-% Restore active chars for included file.
-\def\includezzz#1{\endgroup\begingroup
- % Read the included file in a group so nested @include's work.
- \def\thisfile{#1}%
- \input\thisfile
-\endgroup}
-
-\def\thisfile{}
-
-% @center line outputs that line, centered
-
-\def\center{\parsearg\centerzzz}
-\def\centerzzz #1{{\advance\hsize by -\leftskip
-\advance\hsize by -\rightskip
-\centerline{#1}}}
-
-% @sp n outputs n lines of vertical space
-
-\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore is another way to write a comment
-
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
-\let\c=\comment
-
-% @paragraphindent NCHARS
-% We'll use ems for NCHARS, close enough.
-% We cannot implement @paragraphindent asis, though.
-%
-\def\asisword{asis} % no translation, these are keywords
-\def\noneword{none}
-%
-\def\paragraphindent{\parsearg\doparagraphindent}
-\def\doparagraphindent#1{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \defaultparindent = 0pt
- \else
- \defaultparindent = #1em
- \fi
- \fi
- \parindent = \defaultparindent
-}
-
-% @exampleindent NCHARS
-% We'll use ems for NCHARS like @paragraphindent.
-% It seems @exampleindent asis isn't necessary, but
-% I preserve it to make it similar to @paragraphindent.
-\def\exampleindent{\parsearg\doexampleindent}
-\def\doexampleindent#1{%
- \def\temp{#1}%
- \ifx\temp\asisword
- \else
- \ifx\temp\noneword
- \lispnarrowing = 0pt
- \else
- \lispnarrowing = #1em
- \fi
- \fi
-}
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math outputs its argument in math mode.
-% We don't use $'s directly in the definition of \math because we need
-% to set catcodes according to plain TeX first, to allow for subscripts,
-% superscripts, special math chars, etc.
-%
-% @math does not do math typesetting in section titles, index
-% entries, and other such contexts where the catcodes are set before
-% @math gets a chance to work. This could perhaps be fixed, but for now
-% at least we can have real math in the main text, where it's needed most.
-%
-\let\implicitmath = $%$ font-lock fix
-%
-% One complication: _ usually means subscripts, but it could also mean
-% an actual _ character, as in @math{@var{some_variable} + 1}. So make
-% _ within @math be active (mathcode "8000), and distinguish by seeing
-% if the current family is \slfam, which is what @var uses.
-%
-{\catcode95 = \active % 95 = _
-\gdef\mathunderscore{%
- \catcode95=\active
- \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
-}}
-%
-% Another complication: we want \\ (and @\) to output a \ character.
-% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
-% this is not advertised and we don't care. Texinfo does not
-% otherwise define @\.
-%
-% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
-\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
-%
-\def\math{%
- \tex
- \mathcode`\_="8000 \mathunderscore
- \let\\ = \mathbackslash
- \implicitmath\finishmath}
-\def\finishmath#1{#1\implicitmath\Etex}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{\implicitmath\ptexbullet\implicitmath}
-\def\minus{\implicitmath-\implicitmath}
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \iflinks
- \readauxfile
- \fi % \openindices needs to do some work in any case.
- \openindices
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- % Just to be on the safe side, close the input stream before the \input.
- \openin 1 texinfo.cnf
- \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
- \closein1
- \temp
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{pdf,}
-% adobe `portable' document format
-\newcount\tempnum
-\newcount\lnkcount
-\newtoks\filename
-\newcount\filenamelength
-\newcount\pgn
-\newtoks\toksA
-\newtoks\toksB
-\newtoks\toksC
-\newtoks\toksD
-\newbox\boxA
-\newcount\countA
-\newif\ifpdf
-\newif\ifpdfmakepagedest
-
-\ifx\pdfoutput\undefined
- \pdffalse
- \let\pdfmkdest = \gobble
- \let\pdfurl = \gobble
- \let\endlink = \relax
- \let\linkcolor = \relax
- \let\pdfmakeoutlines = \relax
-\else
- \pdftrue
- \pdfoutput = 1
- \input pdfcolor
- \def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}%
- \def\imageheight{#3}%
- % without \immediate, pdftex seg faults when the same image is
- % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
- \ifnum\pdftexversion < 14
- \immediate\pdfimage
- \else
- \immediate\pdfximage
- \fi
- \ifx\empty\imagewidth\else width \imagewidth \fi
- \ifx\empty\imageheight\else height \imageheight \fi
- \ifnum\pdftexversion<13
- #1.pdf%
- \else
- {#1.pdf}%
- \fi
- \ifnum\pdftexversion < 14 \else
- \pdfrefximage \pdflastximage
- \fi}
- \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
- \def\pdfmkpgn#1{#1}
- \let\linkcolor = \Blue % was Cyan, but that seems light?
- \def\endlink{\Black\pdfendlink}
- % Adding outlines to PDF; macros for calculating structure of outlines
- % come from Petr Olsak
- \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
- \else \csname#1\endcsname \fi}
- \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
- \advance\tempnum by1
- \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
- \def\pdfmakeoutlines{{%
- \openin 1 \jobname.toc
- \ifeof 1\else\begingroup
- \closein 1
- % Thanh's hack / proper braces in bookmarks
- \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
- \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
- %
- \def\chapentry ##1##2##3{}
- \def\secentry ##1##2##3##4{\advancenumber{chap##2}}
- \def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
- \def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
- \let\appendixentry = \chapentry
- \let\unnumbchapentry = \chapentry
- \let\unnumbsecentry = \secentry
- \let\unnumbsubsecentry = \subsecentry
- \let\unnumbsubsubsecentry = \subsubsecentry
- \input \jobname.toc
- \def\chapentry ##1##2##3{%
- \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
- \def\secentry ##1##2##3##4{%
- \pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
- \def\subsecentry ##1##2##3##4##5{%
- \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
- \def\subsubsecentry ##1##2##3##4##5##6{%
- \pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
- \let\appendixentry = \chapentry
- \let\unnumbchapentry = \chapentry
- \let\unnumbsecentry = \secentry
- \let\unnumbsubsecentry = \subsecentry
- \let\unnumbsubsubsecentry = \subsubsecentry
- %
- % Make special characters normal for writing to the pdf file.
- %
- \indexnofonts
- \let\tt=\relax
- \turnoffactive
- \input \jobname.toc
- \endgroup\fi
- }}
- \def\makelinks #1,{%
- \def\params{#1}\def\E{END}%
- \ifx\params\E
- \let\nextmakelinks=\relax
- \else
- \let\nextmakelinks=\makelinks
- \ifnum\lnkcount>0,\fi
- \picknum{#1}%
- \startlink attr{/Border [0 0 0]}
- goto name{\pdfmkpgn{\the\pgn}}%
- \linkcolor #1%
- \advance\lnkcount by 1%
- \endlink
- \fi
- \nextmakelinks
- }
- \def\picknum#1{\expandafter\pn#1}
- \def\pn#1{%
- \def\p{#1}%
- \ifx\p\lbrace
- \let\nextpn=\ppn
- \else
- \let\nextpn=\ppnn
- \def\first{#1}
- \fi
- \nextpn
- }
- \def\ppn#1{\pgn=#1\gobble}
- \def\ppnn{\pgn=\first}
- \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\skipspaces#1{\def\PP{#1}\def\D{|}%
- \ifx\PP\D\let\nextsp\relax
- \else\let\nextsp\skipspaces
- \ifx\p\space\else\addtokens{\filename}{\PP}%
- \advance\filenamelength by 1
- \fi
- \fi
- \nextsp}
- \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
- \ifnum\pdftexversion < 14
- \let \startlink \pdfannotlink
- \else
- \let \startlink \pdfstartlink
- \fi
- \def\pdfurl#1{%
- \begingroup
- \normalturnoffactive\def\@{@}%
- \let\value=\expandablevalue
- \leavevmode\Red
- \startlink attr{/Border [0 0 0]}%
- user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
- % #1
- \endgroup}
- \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
- \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
- \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
- \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
- \def\maketoks{%
- \expandafter\poptoks\the\toksA|ENDTOKS|
- \ifx\first0\adn0
- \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
- \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
- \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
- \else
- \ifnum0=\countA\else\makelink\fi
- \ifx\first.\let\next=\done\else
- \let\next=\maketoks
- \addtokens{\toksB}{\the\toksD}
- \ifx\first,\addtokens{\toksB}{\space}\fi
- \fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \next}
- \def\makelink{\addtokens{\toksB}%
- {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
- \def\pdflink#1{%
- \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
- \linkcolor #1\endlink}
- \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
-\fi % \ifx\pdfoutput
-
-
-\message{fonts,}
-% Font-change commands.
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf analogous to plain's \rm, etc.
-\newfam\sffam
-\def\sf{\fam=\sffam \tensf}
-\let\li = \sf % Sometimes we call it \li, not \sf.
-
-% We don't need math for this one.
-\def\ttsl{\tenttsl}
-
-% Default leading.
-\newdimen\textleading \textleading = 13.2pt
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-\def\setleading#1{%
- \normalbaselineskip = #1\relax
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\undefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-\newcount\mainmagstep
-\ifx\bigger\relax
- % not really supported.
- \mainmagstep=\magstep1
- \setfont\textrm\rmshape{12}{1000}
- \setfont\texttt\ttshape{12}{1000}
-\else
- \mainmagstep=\magstephalf
- \setfont\textrm\rmshape{10}{\mainmagstep}
- \setfont\texttt\ttshape{10}{\mainmagstep}
-\fi
-% Instead of cmb10, you many want to use cmbx10.
-% cmbx10 is a prettier font on its own, but cmb10
-% looks better when embedded in a line with cmr10.
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-
-% A few fonts for @defun, etc.
-\setfont\defbf\bxshape{10}{\magstep1} %was 1314
-\setfont\deftt\ttshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
-
-% Fonts for indices, footnotes, small examples (9pt).
-\setfont\smallrm\rmshape{9}{1000}
-\setfont\smalltt\ttshape{9}{1000}
-\setfont\smallbf\bfshape{10}{900}
-\setfont\smallit\itshape{9}{1000}
-\setfont\smallsl\slshape{9}{1000}
-\setfont\smallsf\sfshape{9}{1000}
-\setfont\smallsc\scshape{10}{900}
-\setfont\smallttsl\ttslshape{10}{900}
-\font\smalli=cmmi9
-\font\smallsy=cmsy9
-
-% Fonts for small examples (8pt).
-\setfont\smallerrm\rmshape{8}{1000}
-\setfont\smallertt\ttshape{8}{1000}
-\setfont\smallerbf\bfshape{10}{800}
-\setfont\smallerit\itshape{8}{1000}
-\setfont\smallersl\slshape{8}{1000}
-\setfont\smallersf\sfshape{8}{1000}
-\setfont\smallersc\scshape{10}{800}
-\setfont\smallerttsl\ttslshape{10}{800}
-\font\smalleri=cmmi8
-\font\smallersy=cmsy8
-
-% Fonts for title page:
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-
-% Section fonts (14.4pt).
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-
-% Subsection fonts (13.15pt).
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{\magstep1}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
-% but that is not a standard magnification.
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts except
-% in the main text, we don't bother to reset \scriptfont and
-% \scriptscriptfont (which would also require loading a lot more fonts).
-%
-\def\resetmathfonts{%
- \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
- \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
- \textfont\ttfam=\tentt \textfont\sffam=\tensf
-}
-
-% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this so that font changes will continue to work
-% in math mode, where it is the current \fam that is relevant in most
-% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
-% \tenbf}, for example. By redefining \tenbf, we obviate the need to
-% redefine \bf itself.
-\def\textfonts{%
- \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
- \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
- \resetmathfonts \setleading{\textleading}}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
-\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
- \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
- \resetmathfonts \setleading{19pt}}
-\def\secfonts{%
- \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
- \resetmathfonts \setleading{16pt}}
-\def\subsecfonts{%
- \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
- \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
- \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
-\def\smallfonts{%
- \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
- \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
- \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
- \let\tenttsl=\smallttsl
- \resetmathfonts \setleading{10.5pt}}
-\def\smallerfonts{%
- \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
- \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
- \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
- \let\tenttsl=\smallerttsl
- \resetmathfonts \setleading{9.5pt}}
-\let\smallexamplefonts = \smallerfonts
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\textfonts
-
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bxshape{12}{1000}
-\setfont\shortcontsl\slshape{12}{1000}
-
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
-
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
-\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
-
-\let\i=\smartitalic
-\let\var=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-\let\cite=\smartslanted
-
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-\def\t#1{%
- {\tt \rawbackslash \frenchspacing #1}%
- \null
-}
-\let\ttfont=\t
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\keyrm\rmshape{8}{1000}
-\font\keysy=cmsy9
-\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
- \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
- \vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
- \kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
-\def\tclose#1{%
- {%
- % Change normal interword space to be same as for the current font.
- \spaceskip = \fontdimen2\font
- %
- % Switch to typewriter.
- \tt
- %
- % But `\ ' produces the large typewriter interword space.
- \def\ {{\spaceskip = 0pt{} }}%
- %
- % Turn off hyphenation.
- \nohyphenation
- %
- \rawbackslash
- \frenchspacing
- #1%
- }%
- \null
-}
-
-% We *must* turn on hyphenation at `-' and `_' in \code.
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
-{
- \catcode`\-=\active
- \catcode`\_=\active
- %
- \global\def\code{\begingroup
- \catcode`\-=\active \let-\codedash
- \catcode`\_=\active \let_\codeunder
- \codex
- }
- %
- % If we end up with any active - characters when handling the index,
- % just treat them as a normal -.
- \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
-}
-
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{%
- % this is all so @math{@code{var_name}+1} can work. In math mode, _
- % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
- % will therefore expand the active definition of _, which is us
- % (inside @code that is), therefore an endless loop.
- \ifusingtt{\ifmmode
- \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
- \else\normalunderscore \fi
- \discretionary{}{}{}}%
- {\_}%
-}
-\def\codex #1{\tclose{#1}\endgroup}
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
-\def\kbdinputstylexxx#1{%
- \def\arg{#1}%
- \ifx\arg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\arg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\arg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
-% the catcodes are wrong for parsearg to work.)
-\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% For @url, @env, @command quotes seem unnecessary, so use \code.
-\let\url=\code
-\let\env=\code
-\let\command=\code
-
-% @uref (abbreviation for `urlref') takes an optional (comma-separated)
-% second argument specifying the text to display and an optional third
-% arg as text to display instead of (rather than in addition to) the url
-% itself. First (mandatory) arg is the url. Perhaps eventually put in
-% a hypertex \special here.
-%
-\def\uref#1{\douref #1,,,\finish}
-\def\douref#1,#2,#3,#4\finish{\begingroup
- \unsepspaces
- \pdfurl{#1}%
- \setbox0 = \hbox{\ignorespaces #3}%
- \ifdim\wd0 > 0pt
- \unhbox0 % third arg given, show only that
- \else
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \ifpdf
- \unhbox0 % PDF: 2nd arg given, show only it
- \else
- \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
- \fi
- \else
- \code{#1}% only url given, so show it
- \fi
- \fi
- \endlink
-\endgroup}
-
-% rms does not like angle brackets --karl, 17may97.
-% So now @email is just like @uref, unless we are pdf.
-%
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\ifpdf
- \def\email#1{\doemail#1,,\finish}
- \def\doemail#1,#2,#3\finish{\begingroup
- \unsepspaces
- \pdfurl{mailto:#1}%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
- \endlink
- \endgroup}
-\else
- \let\email=\uref
-\fi
-
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
-% @acronym downcases the argument and prints in smallcaps.
-\def\acronym#1{{\smallcaps \lowercase{#1}}}
-
-% @pounds{} is a sterling sign.
-\def\pounds{{\it\$}}
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page. Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
-\def\shorttitlepage{\parsearg\shorttitlepagezzz}
-\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
-
-\def\titlepage{\begingroup \parindent=0pt \textfonts
- \let\subtitlerm=\tenrm
- \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
- %
- \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
- %
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- %
- % Now you can print the title using @title.
- \def\title{\parsearg\titlezzz}%
- \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Now you can put text using @subtitle.
- \def\subtitle{\parsearg\subtitlezzz}%
- \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
- %
- % @author should come last, but may come many times.
- \def\author{\parsearg\authorzzz}%
- \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
- {\authorfont \leftline{##1}}}%
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- \oldpage
- \let\page = \oldpage
- \hbox{}}%
-% \def\page{\oldpage \hbox{}}
-}
-
-\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % Need this before the \...aftertitlepage checks so that if they are
- % in effect the toc pages will come out with page numbers.
- \HEADINGSon
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
-}
-
-\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-%%% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline % headline on even pages
-\newtoks\oddheadline % headline on odd pages
-\newtoks\evenfootline % footline on even pages
-\newtoks\oddfootline % footline on odd pages
-
-% Now make Tex use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
- \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
- \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what @headings on does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\everyheading{\parsearg\everyheadingxxx}
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\everyfooting{\parsearg\everyfootingxxx}
-
-{\catcode`\@=0 %
-
-\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
-\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
-\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
-\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
-\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
-}
-
-\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-%
-}% unbind the catcode of @.
-
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\def\headings #1 {\csname HEADINGS#1\endcsname}
-
-\def\HEADINGSoff{
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% This produces Day Month Year style of output.
-% Only define if not already defined, in case a txi-??.tex file has set
-% up a different format (e.g., txi-cs.tex does this).
-\ifx\today\undefined
-\def\today{%
- \number\day\space
- \ifcase\month
- \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
- \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
- \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
- \fi
- \space\number\year}
-\fi
-
-% @settitle line... specifies the title of the document, for headings.
-% It generates no output of its own.
-\def\thistitle{\putwordNoTitle}
-\def\settitle{\parsearg\settitlezzz}
-\def\settitlezzz #1{\gdef\thistitle{#1}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
-\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
-
-\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
-\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
-
-\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
- \itemzzz {#1}}
-
-\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
- \itemzzz {#1}}
-
-\def\itemzzz #1{\begingroup %
- \advance\hsize by -\rightskip
- \advance\hsize by -\tableindent
- \setbox0=\hbox{\itemfont{#1}}%
- \itemindex{#1}%
- \nobreak % This prevents a break before @itemx.
- %
- % If the item text does not fit in the space we have, put it on a line
- % by itself, and do not allow a page break either before or after that
- % line. We do not start a paragraph here because then if the next
- % command is, e.g., @kindex, the whatsit would get put into the
- % horizontal list on a line by itself, resulting in extra blank space.
- \ifdim \wd0>\itemmax
- %
- % Make this a paragraph so we get the \parskip glue and wrapping,
- % but leave it ragged-right.
- \begingroup
- \advance\leftskip by-\tableindent
- \advance\hsize by\tableindent
- \advance\rightskip by0pt plus1fil
- \leavevmode\unhbox0\par
- \endgroup
- %
- % We're going to be starting a paragraph, but we don't want the
- % \parskip glue -- logically it's part of the @item we just started.
- \nobreak \vskip-\parskip
- %
- % Stop a page break at the \parskip glue coming up. Unfortunately
- % we can't prevent a possible page break at the following
- % \baselineskip glue.
- \nobreak
- \endgroup
- \itemxneedsnegativevskipfalse
- \else
- % The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line.
- \noindent
- % Do this with kerns and \unhbox so that if there is a footnote in
- % the item text, it can migrate to the main vertical list and
- % eventually be printed.
- \nobreak\kern-\tableindent
- \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
- \unhbox0
- \nobreak\kern\dimen0
- \endgroup
- \itemxneedsnegativevskiptrue
- \fi
-}
-
-\def\item{\errmessage{@item while not in a table}}
-\def\itemx{\errmessage{@itemx while not in a table}}
-\def\kitem{\errmessage{@kitem while not in a table}}
-\def\kitemx{\errmessage{@kitemx while not in a table}}
-\def\xitem{\errmessage{@xitem while not in a table}}
-\def\xitemx{\errmessage{@xitemx while not in a table}}
-
-% Contains a kludge to get @end[description] to work.
-\def\description{\tablez{\dontindex}{1}{}{}{}{}}
-
-% @table, @ftable, @vtable.
-\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
-{\obeylines\obeyspaces%
-\gdef\tablex #1^^M{%
-\tabley\dontindex#1 \endtabley}}
-
-\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
-{\obeylines\obeyspaces%
-\gdef\ftablex #1^^M{%
-\tabley\fnitemindex#1 \endtabley
-\def\Eftable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
-{\obeylines\obeyspaces%
-\gdef\vtablex #1^^M{%
-\tabley\vritemindex#1 \endtabley
-\def\Evtable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\dontindex #1{}
-\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
-\def\vritemindex #1{\doind {vr}{\code{#1}}}%
-
-{\obeyspaces %
-\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
-\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
-
-\def\tablez #1#2#3#4#5#6{%
-\aboveenvbreak %
-\begingroup %
-\def\Edescription{\Etable}% Necessary kludge.
-\let\itemindex=#1%
-\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
-\ifnum 0#4>0 \tableindent=#4\mil \fi %
-\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
-\def\itemfont{#2}%
-\itemmax=\tableindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \tableindent %
-\exdentamount=\tableindent
-\parindent = 0pt
-\parskip = \smallskipamount
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def\Etable{\endgraf\afterenvbreak\endgroup}%
-\let\item = \internalBitem %
-\let\itemx = \internalBitemx %
-\let\kitem = \internalBkitem %
-\let\kitemx = \internalBkitemx %
-\let\xitem = \internalBxitem %
-\let\xitemx = \internalBxitemx %
-}
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\def\itemize{\parsearg\itemizezzz}
-
-\def\itemizezzz #1{%
- \begingroup % ended by the @end itemize
- \itemizey {#1}{\Eitemize}
-}
-
-\def\itemizey #1#2{%
-\aboveenvbreak %
-\itemmax=\itemindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \itemindent %
-\exdentamount=\itemindent
-\parindent = 0pt %
-\parskip = \smallskipamount %
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def#2{\endgraf\afterenvbreak\endgroup}%
-\def\itemcontents{#1}%
-\let\item=\itemizeitem}
-
-% Set sfcode to normal for the chars that usually have another value.
-% These are `.?!:;,'
-\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
- \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list. No
-% argument is the same as `1'.
-%
-\def\enumerate{\parsearg\enumeratezzz}
-\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
- \begingroup % ended by the @end enumerate
- %
- % If we were given no argument, pretend we were given `1'.
- \def\thearg{#1}%
- \ifx\thearg\empty \def\thearg{1}\fi
- %
- % Detect if the argument is a single token. If so, it might be a
- % letter. Otherwise, the only valid thing it can be is a number.
- % (We will always have one token, because of the test we just made.
- % This is a good thing, since \splitoff doesn't work given nothing at
- % all -- the first parameter is undelimited.)
- \expandafter\splitoff\thearg\endmark
- \ifx\rest\empty
- % Only one token in the argument. It could still be anything.
- % A ``lowercase letter'' is one whose \lccode is nonzero.
- % An ``uppercase letter'' is one whose \lccode is both nonzero, and
- % not equal to itself.
- % Otherwise, we assume it's a number.
- %
- % We need the \relax at the end of the \ifnum lines to stop TeX from
- % continuing to look for a <number>.
- %
- \ifnum\lccode\expandafter`\thearg=0\relax
- \numericenumerate % a number (we hope)
- \else
- % It's a letter.
- \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
- \lowercaseenumerate % lowercase letter
- \else
- \uppercaseenumerate % uppercase letter
- \fi
- \fi
- \else
- % Multiple tokens in the argument. We hope it's a number.
- \numericenumerate
- \fi
-}
-
-% An @enumerate whose labels are integers. The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
- \itemno = \thearg
- \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more lowercase letters in @enumerate; get a bigger
- alphabet}%
- \fi
- \char\lccode\itemno
- }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more uppercase letters in @enumerate; get a bigger
- alphabet}
- \fi
- \char\uccode\itemno
- }%
-}
-
-% Call itemizey, adding a period to the first argument and supplying the
-% common last two arguments. Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
- \advance\itemno by -1
- \itemizey{#1.}\Eenumerate\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-% Definition of @item while inside @itemize.
-
-\def\itemizeitem{%
-\advance\itemno by 1
-{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{In hmode at itemizeitem}\fi
-{\parskip=0in \hskip 0pt
-\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
-\vadjust{\penalty 1200}}%
-\flushcr}
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-%
-% For those who want to use more than one line's worth of words in
-% the preamble, break the line within one argument and it
-% will parse correctly, i.e.,
-%
-% @multitable {Column 1 template} {Column 2 template} {Column 3
-% template}
-% Not:
-% @multitable {Column 1 template} {Column 2 template}
-% {Column 3 template}
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab, @multitable or @end multitable do not need to be on their
-% own lines, but it will not hurt if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% #1 is the part of the @columnfraction before the decimal point, which
-% is presumably either 0 or the empty string (but we don't check, we
-% just throw it away). #2 is the decimal part, which we use as the
-% percent of \hsize for this column.
-\def\pickupwholefraction#1.#2 {%
- \global\advance\colcount by 1
- \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
- \setuptable
-}
-
-\newcount\colcount
-\def\setuptable#1{%
- \def\firstarg{#1}%
- \ifx\firstarg\xendsetuptable
- \let\go = \relax
- \else
- \ifx\firstarg\xcolumnfractions
- \global\setpercenttrue
- \else
- \ifsetpercent
- \let\go\pickupwholefraction
- \else
- \global\advance\colcount by 1
- \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
- % typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi
- \fi
- \ifx\go\pickupwholefraction
- % Put the argument back for the \pickupwholefraction call, so
- % we'll always have a period there to be parsed.
- \def\go{\pickupwholefraction#1}%
- \else
- \let\go = \setuptable
- \fi%
- \fi
- \go
-}
-
-% This used to have \hskip1sp. But then the space in a template line is
-% not enough. That is bad. So let's go back to just & until we
-% encounter the problem it was intended to solve again.
-% --karl, nathan@acm.org, 20apr99.
-\def\tab{&}
-
-% @multitable ... @end multitable definitions:
-%
-\def\multitable{\parsearg\dotable}
-\def\dotable#1{\bgroup
- \vskip\parskip
- \let\item\crcr
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
- %
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
- % The table preamble
- % looks at the current \colcount to find the correct column width.
- \everycr{\noalign{%
- %
- % \filbreak%% keeps underfull box messages off when table breaks over pages.
- % Maybe so, but it also creates really weird page breaks when the table
- % breaks over pages. Wouldn't \vfil be better? Wait until the problem
- % manifests itself, so it can be fixed for real --karl.
- \global\colcount=0\relax}}%
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup&\global\advance\colcount by 1\relax
- \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
-}
-
-\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
-% If so, do nothing. If not, give it an appropriate dimension based on
-% current baselineskip.
-\ifdim\multitablelinespace=0pt
-\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
-\global\advance\multitablelinespace by-\ht0
-%% strut to put in table in case some entry doesn't have descenders,
-%% to keep lines equally spaced
-\let\multistrut = \strut
-\else
-%% FIXME: what is \box0 supposed to be?
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi}
-
-
-\message{conditionals,}
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
- \let\chapter=\relax
- \let\unnumbered=\relax
- \let\top=\relax
- \let\unnumberedsec=\relax
- \let\unnumberedsection=\relax
- \let\unnumberedsubsec=\relax
- \let\unnumberedsubsection=\relax
- \let\unnumberedsubsubsec=\relax
- \let\unnumberedsubsubsection=\relax
- \let\section=\relax
- \let\subsec=\relax
- \let\subsubsec=\relax
- \let\subsection=\relax
- \let\subsubsection=\relax
- \let\appendix=\relax
- \let\appendixsec=\relax
- \let\appendixsection=\relax
- \let\appendixsubsec=\relax
- \let\appendixsubsection=\relax
- \let\appendixsubsubsec=\relax
- \let\appendixsubsubsection=\relax
- \let\contents=\relax
- \let\smallbook=\relax
- \let\titlepage=\relax
-}
-
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
-%
-\def\ignoremorecommands{%
- \let\defcodeindex = \relax
- \let\defcv = \relax
- \let\deffn = \relax
- \let\deffnx = \relax
- \let\defindex = \relax
- \let\defivar = \relax
- \let\defmac = \relax
- \let\defmethod = \relax
- \let\defop = \relax
- \let\defopt = \relax
- \let\defspec = \relax
- \let\deftp = \relax
- \let\deftypefn = \relax
- \let\deftypefun = \relax
- \let\deftypeivar = \relax
- \let\deftypeop = \relax
- \let\deftypevar = \relax
- \let\deftypevr = \relax
- \let\defun = \relax
- \let\defvar = \relax
- \let\defvr = \relax
- \let\ref = \relax
- \let\xref = \relax
- \let\printindex = \relax
- \let\pxref = \relax
- \let\settitle = \relax
- \let\setchapternewpage = \relax
- \let\setchapterstyle = \relax
- \let\everyheading = \relax
- \let\evenheading = \relax
- \let\oddheading = \relax
- \let\everyfooting = \relax
- \let\evenfooting = \relax
- \let\oddfooting = \relax
- \let\headings = \relax
- \let\include = \relax
- \let\lowersections = \relax
- \let\down = \relax
- \let\raisesections = \relax
- \let\up = \relax
- \let\set = \relax
- \let\clear = \relax
- \let\item = \relax
-}
-
-% Ignore @ignore, @ifhtml, @ifinfo, @ifplaintext, @ifnottex, @html, @menu,
-% @direntry, and @documentdescription.
-%
-\def\ignore{\doignore{ignore}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifplaintext{\doignore{ifplaintext}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\html{\doignore{html}}
-\def\menu{\doignore{menu}}
-\def\direntry{\doignore{direntry}}
-\def\documentdescription{\doignore{documentdescription}}
-\def\documentdescriptionword{documentdescription}
-
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory = \comment
-
-% Ignore text until a line `@end #1'.
-%
-\def\doignore#1{\begingroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define a command to swallow text until we reach `@end #1'.
- % This @ is a catcode 12 token (that is the normal catcode of @ in
- % this texinfo.tex file). We change the catcode of @ below to match.
- \long\def\doignoretext##1@end #1{\enddoignore}%
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \catcode32 = 10
- %
- % Ignore braces, too, so mismatched braces don't cause trouble.
- \catcode`\{ = 9
- \catcode`\} = 9
- %
- % We must not have @c interpreted as a control sequence.
- \catcode`\@ = 12
- %
- \def\ignoreword{#1}%
- \ifx\ignoreword\documentdescriptionword
- % The c kludge breaks documentdescription, since
- % `documentdescription' contains a `c'. Means not everything will
- % be ignored inside @documentdescription, but oh well...
- \else
- % Make the letter c a comment character so that the rest of the line
- % will be ignored. This way, the document can have (for example)
- % @c @end ifinfo
- % and the @end ifinfo will be properly ignored.
- % (We've just changed @ to catcode 12.)
- \catcode`\c = 14
- \fi
- %
- % And now expand the command defined above.
- \doignoretext
-}
-
-% What we do to finish off ignored text.
-%
-\def\enddoignore{\endgroup\ignorespaces}%
-
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
- \ifwarnedobs\relax\else
- % We need to warn folks that they may have trouble with TeX 3.0.
- % This uses \immediate\write16 rather than \message to get newlines.
- \immediate\write16{}
- \immediate\write16{WARNING: for users of Unix TeX 3.0!}
- \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
- \immediate\write16{If you are running another version of TeX, relax.}
- \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
- \immediate\write16{ Then upgrade your TeX installation if you can.}
- \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
- \immediate\write16{If you are stuck with version 3.0, run the}
- \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
- \immediate\write16{ to use a workaround.}
- \immediate\write16{}
- \global\warnedobstrue
- \fi
-}
-
-% **In TeX 3.0, setting text in \nullfont hangs tex. For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
-
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
-%
-\def\nestedignore#1{%
- \obstexwarn
- % We must actually expand the ignored text to look for the @end
- % command, so that nested ignore constructs work. Thus, we put the
- % text into a \vbox and then do nothing with the result. To minimize
- % the change of memory overflow, we follow the approach outlined on
- % page 401 of the TeXbook: make the current font be a dummy font.
- %
- \setbox0 = \vbox\bgroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define `@end #1' to end the box, which will in turn undefine the
- % @end command again.
- \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
- %
- % We are going to be parsing Texinfo commands. Most cause no
- % trouble when they are used incorrectly, but some commands do
- % complicated argument parsing or otherwise get confused, so we
- % undefine them.
- %
- % We can't do anything about stray @-signs, unfortunately;
- % they'll produce `undefined control sequence' errors.
- \ignoremorecommands
- %
- % Set the current font to be \nullfont, a TeX primitive, and define
- % all the font commands to also use \nullfont. We don't use
- % dummy.tfm, as suggested in the TeXbook, because not all sites
- % might have that installed. Therefore, math mode will still
- % produce output, but that should be an extremely small amount of
- % stuff compared to the main input.
- %
- \nullfont
- \let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
- \let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
- \let\tensf=\nullfont
- % Similarly for index fonts.
- \let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
- \let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
- \let\smallsf=\nullfont
- % Similarly for smallexample fonts.
- \let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont
- \let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont
- \let\smallersf=\nullfont
- %
- % Don't complain when characters are missing from the fonts.
- \tracinglostchars = 0
- %
- % Don't bother to do space factor calculations.
- \frenchspacing
- %
- % Don't report underfull hboxes.
- \hbadness = 10000
- %
- % Do minimal line-breaking.
- \pretolerance = 10000
- %
- % Do not execute instructions in @tex
- \def\tex{\doignore{tex}}%
- % Do not execute macro definitions.
- % `c' is a comment character, so the word `macro' will get cut off.
- \def\macro{\doignore{ma}}%
-}
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it. Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
-%
-\def\set{\begingroup\catcode` =10
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- \def\temp{#2}%
- \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
- \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
- \fi
- \endgroup
-}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
-{
- \catcode`\_ = \active
- %
- % We might end up with active _ or - characters in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}. So \let any
- % such active characters to their normal equivalents.
- \gdef\value{\begingroup
- \catcode`\-=12 \catcode`\_=12
- \indexbreaks \let_\normalunderscore
- \valuexxx}
-}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies). Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that. The command has to be fully expandable, since the result
-% winds up in the index file. This means that if the variable's value
-% contains other Texinfo commands, it's almost certain it will fail
-% (although perhaps we could fix that with sufficient work to do a
-% one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-\def\ifset{\parsearg\ifsetxxx}
-\def\ifsetxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifsetfail
- \else
- \expandafter\ifsetsucceed
- \fi
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-\def\ifclear{\parsearg\ifclearxxx}
-\def\ifclearxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifclearsucceed
- \else
- \expandafter\ifclearfail
- \fi
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
-% read the text following, through the first @end iftex (etc.). Make
-% `@end iftex' (etc.) valid only after an @iftex.
-%
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-\defineunmatchedend{ifnotplaintext}
-
-% We can't just want to start a group at @iftex (etc.) and end it at
-% @end iftex, since then @set commands inside the conditional have no
-% effect (they'd get reverted at the end of the group). So we must
-% define \Eiftex to redefine itself to be its previous value. (We can't
-% just define it to fail again with an ``unmatched end'' error, since
-% the @ifset might be nested.)
-%
-\def\conditionalsucceed#1{%
- \edef\temp{%
- % Remember the current value of \E#1.
- \let\nece{prevE#1} = \nece{E#1}%
- %
- % At the `@end #1', redefine \E#1 to be its previous value.
- \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
- }%
- \temp
-}
-
-% We need to expand lots of \csname's, but we don't want to expand the
-% control sequences after we've constructed them.
-%
-\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
-
-% @defininfoenclose.
-\let\definfoenclose=\comment
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
-
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
- \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
- \noexpand\doindex{#1}}
-}
-
-% @defindex foo == \newindex{foo}
-%
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-%
-\def\defcodeindex{\parsearg\newcodeindex}
-%
-\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
- \expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}%
-}
-
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-%
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-%
-\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
-\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
-
-% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
-% #3 the target index (bar).
-\def\dosynindex#1#2#3{%
- % Only do \closeout if we haven't already done it, else we'll end up
- % closing the target index.
- \expandafter \ifx\csname donesynindex#2\endcsname \undefined
- % The \closeout helps reduce unnecessary open files; the limit on the
- % Acorn RISC OS is a mere 16 files.
- \expandafter\closeout\csname#2indfile\endcsname
- \expandafter\let\csname\donesynindex#2\endcsname = 1
- \fi
- % redefine \fooindfile:
- \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
- \expandafter\let\csname#2indfile\endcsname=\temp
- % redefine \fooindex:
- \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
-}
-
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
-
-% Take care of texinfo commands likely to appear in an index entry.
-% (Must be a way to avoid doing expansion at all, and thus not have to
-% laboriously list every single command here.)
-%
-\def\indexdummies{%
-\def\ { }%
-\def\@{@}% change to @@ when we switch to @ as escape char in aux files.
-% Need these in case \tex is in effect and \{ is a \delimiter again.
-% But can't use \lbracecmd and \rbracecmd because texindex assumes
-% braces and backslashes are used only as delimiters.
-\let\{ = \mylbrace
-\let\} = \myrbrace
-\def\_{{\realbackslash _}}%
-\normalturnoffactive
-%
-% Take care of the plain tex accent commands.
-\def\,##1{\realbackslash ,{##1}}%
-\def\"{\realbackslash "}%
-\def\`{\realbackslash `}%
-\def\'{\realbackslash '}%
-\def\^{\realbackslash ^}%
-\def\~{\realbackslash ~}%
-\def\={\realbackslash =}%
-\def\b{\realbackslash b}%
-\def\c{\realbackslash c}%
-\def\d{\realbackslash d}%
-\def\u{\realbackslash u}%
-\def\v{\realbackslash v}%
-\def\H{\realbackslash H}%
-\def\dotless##1{\realbackslash dotless {##1}}%
-% Take care of the plain tex special European modified letters.
-\def\AA{\realbackslash AA}%
-\def\AE{\realbackslash AE}%
-\def\L{\realbackslash L}%
-\def\OE{\realbackslash OE}%
-\def\O{\realbackslash O}%
-\def\aa{\realbackslash aa}%
-\def\ae{\realbackslash ae}%
-\def\l{\realbackslash l}%
-\def\oe{\realbackslash oe}%
-\def\o{\realbackslash o}%
-\def\ss{\realbackslash ss}%
-%
-% Although these internals commands shouldn't show up, sometimes they do.
-\def\bf{\realbackslash bf }%
-\def\gtr{\realbackslash gtr}%
-\def\hat{\realbackslash hat}%
-\def\less{\realbackslash less}%
-%\def\rm{\realbackslash rm }%
-\def\sf{\realbackslash sf}%
-\def\sl{\realbackslash sl }%
-\def\tclose##1{\realbackslash tclose {##1}}%
-\def\tt{\realbackslash tt}%
-%
-\def\b##1{\realbackslash b {##1}}%
-\def\i##1{\realbackslash i {##1}}%
-\def\sc##1{\realbackslash sc {##1}}%
-\def\t##1{\realbackslash t {##1}}%
-\def\r##1{\realbackslash r {##1}}%
-%
-\def\TeX{\realbackslash TeX}%
-\def\acronym##1{\realbackslash acronym {##1}}%
-\def\cite##1{\realbackslash cite {##1}}%
-\def\code##1{\realbackslash code {##1}}%
-\def\command##1{\realbackslash command {##1}}%
-\def\dfn##1{\realbackslash dfn {##1}}%
-\def\dots{\realbackslash dots }%
-\def\emph##1{\realbackslash emph {##1}}%
-\def\env##1{\realbackslash env {##1}}%
-\def\file##1{\realbackslash file {##1}}%
-\def\kbd##1{\realbackslash kbd {##1}}%
-\def\key##1{\realbackslash key {##1}}%
-\def\math##1{\realbackslash math {##1}}%
-\def\option##1{\realbackslash option {##1}}%
-\def\samp##1{\realbackslash samp {##1}}%
-\def\strong##1{\realbackslash strong {##1}}%
-\def\uref##1{\realbackslash uref {##1}}%
-\def\url##1{\realbackslash url {##1}}%
-\def\var##1{\realbackslash var {##1}}%
-\def\w{\realbackslash w }%
-%
-% These math commands don't seem likely to be used in index entries.
-\def\copyright{\realbackslash copyright}%
-\def\equiv{\realbackslash equiv}%
-\def\error{\realbackslash error}%
-\def\expansion{\realbackslash expansion}%
-\def\point{\realbackslash point}%
-\def\print{\realbackslash print}%
-\def\result{\realbackslash result}%
-%
-% Handle some cases of @value -- where the variable name does not
-% contain - or _, and the value does not contain any
-% (non-fully-expandable) commands.
-\let\value = \expandablevalue
-%
-\unsepspaces
-% Turn off macro expansion
-\turnoffmacros
-}
-
-% If an index command is used in an @example environment, any spaces
-% therein should become regular spaces in the raw index file, not the
-% expansion of \tie (\leavevmode \penalty \@M \ ).
-{\obeyspaces
- \gdef\unsepspaces{\obeyspaces\let =\space}}
-
-% \indexnofonts no-ops all font-change commands.
-% This is used when outputting the strings to sort the index by.
-\def\indexdummyfont#1{#1}
-\def\indexdummytex{TeX}
-\def\indexdummydots{...}
-
-\def\indexnofonts{%
-\def\@{@}%
-% how to handle braces?
-\def\_{\normalunderscore}%
-%
-\let\,=\indexdummyfont
-\let\"=\indexdummyfont
-\let\`=\indexdummyfont
-\let\'=\indexdummyfont
-\let\^=\indexdummyfont
-\let\~=\indexdummyfont
-\let\==\indexdummyfont
-\let\b=\indexdummyfont
-\let\c=\indexdummyfont
-\let\d=\indexdummyfont
-\let\u=\indexdummyfont
-\let\v=\indexdummyfont
-\let\H=\indexdummyfont
-\let\dotless=\indexdummyfont
-% Take care of the plain tex special European modified letters.
-\def\AA{AA}%
-\def\AE{AE}%
-\def\L{L}%
-\def\OE{OE}%
-\def\O{O}%
-\def\aa{aa}%
-\def\ae{ae}%
-\def\l{l}%
-\def\oe{oe}%
-\def\o{o}%
-\def\ss{ss}%
-%
-% Don't no-op \tt, since it isn't a user-level command
-% and is used in the definitions of the active chars like <, >, |, etc.
-% Likewise with the other plain tex font commands.
-%\let\tt=\indexdummyfont
-%
-\let\b=\indexdummyfont
-\let\i=\indexdummyfont
-\let\r=\indexdummyfont
-\let\sc=\indexdummyfont
-\let\t=\indexdummyfont
-%
-\let\TeX=\indexdummytex
-\let\acronym=\indexdummyfont
-\let\cite=\indexdummyfont
-\let\code=\indexdummyfont
-\let\command=\indexdummyfont
-\let\dfn=\indexdummyfont
-\let\dots=\indexdummydots
-\let\emph=\indexdummyfont
-\let\env=\indexdummyfont
-\let\file=\indexdummyfont
-\let\kbd=\indexdummyfont
-\let\key=\indexdummyfont
-\let\math=\indexdummyfont
-\let\option=\indexdummyfont
-\let\samp=\indexdummyfont
-\let\strong=\indexdummyfont
-\let\uref=\indexdummyfont
-\let\url=\indexdummyfont
-\let\var=\indexdummyfont
-\let\w=\indexdummyfont
-}
-
-% To define \realbackslash, we must make \ not be an escape.
-% We must first make another character (@) an escape
-% so we do not become unable to do a definition.
-
-{\catcode`\@=0 \catcode`\\=\other
- @gdef@realbackslash{\}}
-
-\let\indexbackslash=0 %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% For \ifx comparisons.
-\def\emptymacro{\empty}
-
-% Most index entries go through here, but \dosubind is the general case.
-%
-\def\doind#1#2{\dosubind{#1}{#2}\empty}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% \empty if called from \doind, as we usually are. The main exception
-% is with defuns, which call us directly.
-%
-\def\dosubind#1#2#3{%
- % Put the index entry in the margin if desired.
- \ifx\SETmarginindex\relax\else
- \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
- \fi
- {%
- \count255=\lastpenalty
- {%
- \indexdummies % Must do this here, since \bf, etc expand at this stage
- \escapechar=`\\
- {%
- \let\folio = 0% We will expand all macros now EXCEPT \folio.
- \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- \def\thirdarg{#3}%
- %
- % If third arg is present, precede it with space in sort key.
- \ifx\thirdarg\emptymacro
- \let\subentry = \empty
- \else
- \def\subentry{ #3}%
- \fi
- %
- % First process the index entry with all font commands turned
- % off to get the string to sort by.
- {\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
- %
- % Now the real index entry with the fonts.
- \toks0 = {#2}%
- %
- % If the third (subentry) arg is present, add it to the index
- % line to write.
- \ifx\thirdarg\emptymacro \else
- \toks0 = \expandafter{\the\toks0{#3}}%
- \fi
- %
- % Set up the complete index entry, with both the sort key and
- % the original text, including any font commands. We write
- % three arguments to \entry to the .?? file (four in the
- % subentry case), texindex reduces to two when writing the .??s
- % sorted result.
- \edef\temp{%
- \write\csname#1indfile\endcsname{%
- \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
- }%
- %
- % If a skip is the last thing on the list now, preserve it
- % by backing up by \lastskip, doing the \write, then inserting
- % the skip again. Otherwise, the whatsit generated by the
- % \write will make \lastskip zero. The result is that sequences
- % like this:
- % @end defun
- % @tindex whatever
- % @defun ...
- % will have extra space inserted, because the \medbreak in the
- % start of the @defun won't see the skip inserted by the @end of
- % the previous defun.
- %
- % But don't do any of this if we're not in vertical mode. We
- % don't want to do a \vskip and prematurely end a paragraph.
- %
- % Avoid page breaks due to these extra skips, too.
- %
- \iflinks
- \ifvmode
- \skip0 = \lastskip
- \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
- \fi
- %
- \temp % do the write
- %
- %
- \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
- \fi
- }%
- }%
- \penalty\count255
- }%
-}
-
-% The index entry written in the file actually looks like
-% \entry {sortstring}{page}{topic}
-% or
-% \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-% \initial {c}
-% before the first topic whose initial is c
-% \entry {topic}{pagelist}
-% for a topic that is used without subtopics
-% \primary {topic}
-% for the beginning of a topic that is used with subtopics
-% \secondary {subtopic}{pagelist}
-% for each subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-\def\cindexsub {\begingroup\obeylines\cindexsub}
-{\obeylines %
-\gdef\cindexsub "#1" #2^^M{\endgroup %
-\dosubind{cp}{#2}{#1}}}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\def\printindex{\parsearg\doprintindex}
-\def\doprintindex#1{\begingroup
- \dobreak \chapheadingskip{10000}%
- %
- \smallfonts \rm
- \tolerance = 9500
- \indexbreaks
- %
- % See if the index file exists and is nonempty.
- % Change catcode of @ here so that if the index file contains
- % \initial {@}
- % as its first line, TeX doesn't complain about mismatched braces
- % (because it thinks @} is a control sequence).
- \catcode`\@ = 11
- \openin 1 \jobname.#1s
- \ifeof 1
- % \enddoublecolumns gets confused if there is no text in the index,
- % and it loses the chapter title and the aux file entries for the
- % index. The easiest way to prevent this problem is to make sure
- % there is some text.
- \putwordIndexNonexistent
- \else
- %
- % If the index file exists but is empty, then \openin leaves \ifeof
- % false. We have to make TeX try to read something from the file, so
- % it can discover if there is anything in it.
- \read 1 to \temp
- \ifeof 1
- \putwordIndexIsEmpty
- \else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\rawbackslashxx}%
- \catcode`\\ = 0
- \escapechar = `\\
- \begindoublecolumns
- \input \jobname.#1s
- \enddoublecolumns
- \fi
- \fi
- \closein 1
-\endgroup}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
- % Remove any glue we may have, we'll be inserting our own.
- \removelastskip
- %
- % We like breaks before the index initials, so insert a bonus.
- \penalty -300
- %
- % Typeset the initial. Making this add up to a whole number of
- % baselineskips increases the chance of the dots lining up from column
- % to column. It still won't often be perfect, because of the stretch
- % we need before each entry, but it's better.
- %
- % No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
- \vskip .33\baselineskip plus .1\baselineskip
- %
- % Do our best not to break after the initial.
- \nobreak
-}}
-
-% This typesets a paragraph consisting of #1, dot leaders, and then #2
-% flush to the right margin. It is used for index and table of contents
-% entries. The paragraph is indented by \leftskip.
-%
-\def\entry#1#2{\begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing columns.
- \vskip 0pt plus1pt
- %
- % Start a ``paragraph'' for the index entry so the line breaking
- % parameters we've set above will have an effect.
- \noindent
- %
- % Insert the text of the index entry. TeX will do line-breaking on it.
- #1%
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \def\tempa{{\rm }}%
- \def\tempb{#2}%
- \edef\tempc{\tempa}%
- \edef\tempd{\tempb}%
- \ifx\tempc\tempd\ \else%
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- \ #2% The page number ends the paragraph.
- \fi
- \fi%
- \par
-\endgroup}
-
-% Like \dotfill except takes at least 1 em.
-\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
-
-\def\primary #1{\line{#1\hfil}}
-
-\newskip\secondaryindent \secondaryindent=0.5cm
-\def\secondary#1#2{{%
- \parfillskip=0in
- \parskip=0in
- \hangindent=1in
- \hangafter=1
- \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
- \ifpdf
- \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
- \else
- #2
- \fi
- \par
-}}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
- % Grab any single-column material above us.
- \output = {%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case we just ship out what is in \partialpage with the normal
- % output routine. Generally, \partialpage will be empty when this
- % runs and this will be a no-op. See the indexspread.tex test case.
- \ifvoid\partialpage \else
- \onepageout{\pagecontents\partialpage}%
- \fi
- %
- \global\setbox\partialpage = \vbox{%
- % Unvbox the main output page.
- \unvbox\PAGE
- \kern-\topskip \kern\baselineskip
- }%
- }%
- \eject % run that output routine to set \partialpage
- %
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
- %
- % Change the page size parameters. We could do this once outside this
- % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
- % format, but then we repeat the same computation. Repeating a couple
- % of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
- %
- % First we halve the line length, less a little for the gutter between
- % the columns. We compute the gutter based on the line length, so it
- % changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
- %
- % We put the result in a separate register, \doublecolumhsize, so we
- % can restore it in \pagesofar, after \hsize itself has (potentially)
- % been clobbered.
- %
- \doublecolumnhsize = \hsize
- \advance\doublecolumnhsize by -.04154\hsize
- \divide\doublecolumnhsize by 2
- \hsize = \doublecolumnhsize
- %
- % Double the \vsize as well. (We don't need a separate register here,
- % since nobody clobbers \vsize.)
- \vsize = 2\vsize
-}
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
-\def\doublecolumnout{%
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- % Get the available space for the double columns -- the normal
- % (undoubled) page height minus any material left over from the
- % previous page.
- \dimen@ = \vsize
- \divide\dimen@ by 2
- \advance\dimen@ by -\ht\partialpage
- %
- % box0 will be the left-hand column, box2 the right.
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
-}
-%
-% Re-output the contents of the output page -- any previous material,
-% followed by the two boxes we just split, in box0 and box2.
-\def\pagesofar{%
- \unvbox\partialpage
- %
- \hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize
- \hbox to\pagewidth{\box0\hfil\box2}%
-}
-%
-% All done with double columns.
-\def\enddoublecolumns{%
- \output = {%
- % Split the last of the double-column material. Leave it on the
- % current page, no automatic page break.
- \balancecolumns
- %
- % If we end up splitting too much material for the current page,
- % though, there will be another page break right after this \output
- % invocation ends. Having called \balancecolumns once, we do not
- % want to call it again. Therefore, reset \output to its normal
- % definition right away. (We hope \balancecolumns will never be
- % called on to balance too much material, but if it is, this makes
- % the output somewhat more palatable.)
- \global\output = {\onepageout{\pagecontents\PAGE}}%
- }%
- \eject
- \endgroup % started in \begindoublecolumns
- %
- % \pagegoal was set to the doubled \vsize above, since we restarted
- % the current page. We're now back to normal single-column
- % typesetting, so reset \pagegoal to the normal \vsize (after the
- % \endgroup where \vsize got restored).
- \pagegoal = \vsize
-}
-%
-% Called at the end of the double column material.
-\def\balancecolumns{%
- \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
- \dimen@ = \ht0
- \advance\dimen@ by \topskip
- \advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
- %
- \pagesofar
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Chapters, sections, etc.
-
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
-% \def\appendixletter{\char\the\appendixno}
-% We do the following for the sake of pdftex, which needs the actual
-% letter in the expansion, not just typeset.
-\def\appendixletter{%
- \ifnum\appendixno=`A A%
- \else\ifnum\appendixno=`B B%
- \else\ifnum\appendixno=`C C%
- \else\ifnum\appendixno=`D D%
- \else\ifnum\appendixno=`E E%
- \else\ifnum\appendixno=`F F%
- \else\ifnum\appendixno=`G G%
- \else\ifnum\appendixno=`H H%
- \else\ifnum\appendixno=`I I%
- \else\ifnum\appendixno=`J J%
- \else\ifnum\appendixno=`K K%
- \else\ifnum\appendixno=`L L%
- \else\ifnum\appendixno=`M M%
- \else\ifnum\appendixno=`N N%
- \else\ifnum\appendixno=`O O%
- \else\ifnum\appendixno=`P P%
- \else\ifnum\appendixno=`Q Q%
- \else\ifnum\appendixno=`R R%
- \else\ifnum\appendixno=`S S%
- \else\ifnum\appendixno=`T T%
- \else\ifnum\appendixno=`U U%
- \else\ifnum\appendixno=`V V%
- \else\ifnum\appendixno=`W W%
- \else\ifnum\appendixno=`X X%
- \else\ifnum\appendixno=`Y Y%
- \else\ifnum\appendixno=`Z Z%
- % The \the is necessary, despite appearances, because \appendixletter is
- % expanded while writing the .toc file. \char\appendixno is not
- % expandable, thus it is written literally, thus all appendixes come out
- % with the same letter (or @) in the toc without it.
- \else\char\the\appendixno
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
- \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise.
-\def\thischapter{}
-\def\thissection{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raise/lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-\let\up=\raisesections % original BFox name
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-\let\down=\lowersections % original BFox name
-
-% Choose a numbered-heading macro
-% #1 is heading level if unmodified by @raisesections or @lowersections
-% #2 is text for heading
-\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \chapterzzz{#2}
-\or
- \seczzz{#2}
-\or
- \numberedsubseczzz{#2}
-\or
- \numberedsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \chapterzzz{#2}
- \else
- \numberedsubsubseczzz{#2}
- \fi
-\fi
-}
-
-% like \numhead, but chooses appendix heading levels
-\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \appendixzzz{#2}
-\or
- \appendixsectionzzz{#2}
-\or
- \appendixsubseczzz{#2}
-\or
- \appendixsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \appendixzzz{#2}
- \else
- \appendixsubsubseczzz{#2}
- \fi
-\fi
-}
-
-% like \numhead, but chooses numberless heading levels
-\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \unnumberedzzz{#2}
-\or
- \unnumberedseczzz{#2}
-\or
- \unnumberedsubseczzz{#2}
-\or
- \unnumberedsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \unnumberedzzz{#2}
- \else
- \unnumberedsubsubseczzz{#2}
- \fi
-\fi
-}
-
-% @chapter, @appendix, @unnumbered.
-\def\thischaptername{No Chapter Title}
-\outer\def\chapter{\parsearg\chapteryyy}
-\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz #1{%
-\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
-\chapmacro {#1}{\the\chapno}%
-\gdef\thissection{#1}%
-\gdef\thischaptername{#1}%
-% We don't substitute the actual chapter name into \thischapter
-% because we don't want its macros evaluated now.
-\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
- {\the\chapno}}}%
-\temp
-\donoderef
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\def\appendix{\parsearg\appendixyyy}
-\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz #1{%
-\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \appendixno by 1
-\message{\putwordAppendix\space \appendixletter}%
-\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
-\gdef\thissection{#1}%
-\gdef\thischaptername{#1}%
-\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash appendixentry{\the\toks0}%
- {\appendixletter}}}%
-\temp
-\appendixnoderef
-\global\let\section = \appendixsec
-\global\let\subsection = \appendixsubsec
-\global\let\subsubsection = \appendixsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\def\centerchap{\parsearg\centerchapyyy}
-\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
-
-% @top is like @unnumbered.
-\outer\def\top{\parsearg\unnumberedyyy}
-
-\outer\def\unnumbered{\parsearg\unnumberedyyy}
-\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz #1{%
-\secno=0 \subsecno=0 \subsubsecno=0
-%
-% This used to be simply \message{#1}, but TeX fully expands the
-% argument to \message. Therefore, if #1 contained @-commands, TeX
-% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
-% expanded @cite (which turns out to cause errors because \cite is meant
-% to be executed, not expanded).
-%
-% Anyway, we don't want the fully-expanded definition of @cite to appear
-% as a result of the \message, we just want `@cite' itself. We use
-% \the<toks register> to achieve this: TeX expands \the<toks> only once,
-% simply yielding the contents of <toks register>. (We also do this for
-% the toc entries.)
-\toks0 = {#1}\message{(\the\toks0)}%
-%
-\unnumbchapmacro {#1}%
-\gdef\thischapter{#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}{\the\chapno}}}%
-\temp
-\unnumbnoderef
-\global\let\section = \unnumberedsec
-\global\let\subsection = \unnumberedsubsec
-\global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% Sections.
-\outer\def\numberedsec{\parsearg\secyyy}
-\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz #1{%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
- {\the\chapno}{\the\secno}}}%
-\temp
-\donoderef
-\nobreak
-}
-
-\outer\def\appendixsection{\parsearg\appendixsecyyy}
-\outer\def\appendixsec{\parsearg\appendixsecyyy}
-\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz #1{%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
- {\appendixletter}{\the\secno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
-
-\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
-\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz #1{%
-\plainsecheading {#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry%
- {\the\toks0}{\the\chapno}{\the\secno}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% Subsections.
-\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
-\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz #1{%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
- {\the\chapno}{\the\secno}{\the\subsecno}}}%
-\temp
-\donoderef
-\nobreak
-}
-
-\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
-\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz #1{%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
- {\appendixletter}{\the\secno}{\the\subsecno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
-
-\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
-\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz #1{%
-\plainsubsecheading {#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
- {\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% Subsubsections.
-\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
-\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz #1{%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\donoderef
-\nobreak
-}
-
-\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
-\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz #1{%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}
- {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
- {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
-
-\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
-\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz #1{%
-\plainsubsubsecheading {#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
- {\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they should now be obsolete; ordinary section commands should work.
-\def\infotop{\parsearg\unnumberedzzz}
-\def\infounnumbered{\parsearg\unnumberedzzz}
-\def\infounnumberedsec{\parsearg\unnumberedseczzz}
-\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
-\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
-
-\def\infoappendix{\parsearg\appendixzzz}
-\def\infoappendixsec{\parsearg\appendixseczzz}
-\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
-\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
-
-\def\infochapter{\parsearg\chapterzzz}
-\def\infosection{\parsearg\sectionzzz}
-\def\infosubsection{\parsearg\subsectionzzz}
-\def\infosubsubsection{\parsearg\subsubsectionzzz}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
-
-\def\majorheading{\parsearg\majorheadingzzz}
-\def\majorheadingzzz #1{%
-{\advance\chapheadingskip by 10pt \chapbreak }%
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 200}
-
-\def\chapheading{\parsearg\chapheadingzzz}
-\def\chapheadingzzz #1{\chapbreak %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 200}
-
-% @heading, @subheading, @subsubheading.
-\def\heading{\parsearg\plainsecheading}
-\def\subheading{\parsearg\plainsubsecheading}
-\def\subsubheading{\parsearg\plainsubsubsecheading}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-%%% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-
-%%% Define plain chapter starts, and page on/off switching for it
-% Parameter controlling skip before chapter headings (if needed)
-
-\newskip\chapheadingskip
-
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-\def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
-
-\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-\def\CHAPFplain{
-\global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain
-\global\let\centerchapmacro=\centerchfplain}
-
-% Plain chapter opening.
-% #1 is the text, #2 the chapter number or empty if unnumbered.
-\def\chfplain#1#2{%
- \pchapsepmacro
- {%
- \chapfonts \rm
- \def\chapnum{#2}%
- \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent = \wd0 \centerparametersmaybe
- \unhbox0 #1\par}%
- }%
- \nobreak\bigskip % no page break after a chapter title
- \nobreak
-}
-
-% Plain opening for unnumbered.
-\def\unnchfplain#1{\chfplain{#1}{}}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerchfplain#1{{%
- \def\centerparametersmaybe{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
- }%
- \chfplain{#1}{}%
-}}
-
-\CHAPFplain % The default
-
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
-}
-
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
-}
-
-\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
-}
-
-\def\CHAPFopen{
-\global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen
-\global\let\centerchapmacro=\centerchfopen}
-
-
-% Section titles.
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
-\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
-\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
-
-% Subsection titles.
-\newskip \subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
-\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
-\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
-
-% Subsubsection titles.
-\let\subsubsecheadingskip = \subsecheadingskip
-\let\subsubsecheadingbreak = \subsecheadingbreak
-\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
-\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
-
-
-% Print any size section title.
-%
-% #1 is the section type (sec/subsec/subsubsec), #2 is the section
-% number (maybe empty), #3 the text.
-\def\sectionheading#1#2#3{%
- {%
- \expandafter\advance\csname #1headingskip\endcsname by \parskip
- \csname #1headingbreak\endcsname
- }%
- {%
- % Switch to the right set of fonts.
- \csname #1fonts\endcsname \rm
- %
- % Only insert the separating space if we have a section number.
- \def\secnum{#2}%
- \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
- %
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent = \wd0 % zero if no section number
- \unhbox0 #3}%
- }%
- \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
-}
-
-
-\message{toc,}
-% Table of contents.
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc. We supply {\folio} at the end of the
-% argument, which will end up as the last argument to the \...entry macro.
-%
-% We open the .toc file here instead of at @setfilename or any other
-% fixed time so that @contents can be put in the document anywhere.
-%
-\newif\iftocfileopened
-\def\writetocentry#1{%
- \iftocfileopened\else
- \immediate\openout\tocfile = \jobname.toc
- \global\tocfileopenedtrue
- \fi
- \iflinks \write\tocfile{#1{\folio}}\fi
- %
- % Tell \shipout to create a page destination if we're doing pdf, which
- % will be the target of the links in the table of contents. We can't
- % just do it on every page because the title pages are numbered 1 and
- % 2 (the page numbers aren't printed), and so are the first two pages
- % of the document. Thus, we'd have two destinations named `1', and
- % two named `2'.
- \ifpdf \pdfmakepagedesttrue \fi
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Finish up the main text and prepare to read what we've written
-% to \tocfile.
-%
-\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege@matematik.su.se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \unnumbchapmacro{#1}\def\thischapter{}%
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- % We can't do this, because then an actual ^ in a section
- % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
- %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \pageno = \lastnegativepageno \fi
-}
-
-
-% Normal (long) toc.
-\def\contents{%
- \startcontents{\putwordTOC}%
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \closein 1
- \input \jobname.toc
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \pdfmakeoutlines
- \endgroup
- \lastnegativepageno = \pageno
- \pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
- \startcontents{\putwordShortTOC}%
- %
- \let\chapentry = \shortchapentry
- \let\appendixentry = \shortappendixentry
- \let\unnumbchapentry = \shortunnumberedentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\secentry ##1##2##3##4{}
- \def\subsecentry ##1##2##3##4##5{}
- \def\subsubsecentry ##1##2##3##4##5##6{}
- \let\unnumbsecentry = \secentry
- \let\unnumbsubsecentry = \subsecentry
- \let\unnumbsubsubsecentry = \subsubsecentry
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \closein 1
- \input \jobname.toc
- \fi
- \vfill \eject
- \contentsalignmacro % in case @setchapternewpage odd is in effect
- \endgroup
- \lastnegativepageno = \pageno
- \pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-\ifpdf
- \pdfcatalog{/PageMode /UseOutlines}%
-\fi
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Chapters, in the main contents.
-\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
-%
-% Chapters, in the short toc.
-% See comments in \dochapentry re vbox and related settings.
-\def\shortchapentry#1#2#3{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
-}
-
-% Appendices, in the main contents.
-\def\appendixentry#1#2#3{\dochapentry{\putwordAppendix{} #2\labelspace#1}{#3}}
-%
-% Appendices, in the short toc.
-\let\shortappendixentry = \shortchapentry
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter.
-% We could simplify the code here by writing out an \appendixentry
-% command in the toc file for appendices, instead of using \chapentry
-% for both, but it doesn't seem worth it.
-%
-\newdimen\shortappendixwidth
-%
-\def\shortchaplabel#1{%
- % This space should be enough, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % But use \hss just in case.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in by \shortchapentry above.)
- \dimen0 = 1em
- \hbox to \dimen0{#1\hss}%
-}
-
-% Unnumbered chapters.
-\def\unnumbchapentry#1#2#3{\dochapentry{#1}{#3}}
-\def\shortunnumberedentry#1#2#3{\tocentry{#1}{\doshortpageno\bgroup#3\egroup}}
-
-% Sections.
-\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
-\def\unnumbsecentry#1#2#3#4{\dosecentry{#1}{#4}}
-
-% Subsections.
-\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
-\def\unnumbsubsecentry#1#2#3#4#5{\dosubsecentry{#1}{#5}}
-
-% And subsubsections.
-\def\subsubsecentry#1#2#3#4#5#6{%
- \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
-\def\unnumbsubsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#1}{#6}}
-
-% This parameter controls the indentation of the various levels.
-\newdimen\tocindent \tocindent = 3pc
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
- \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
- \begingroup
- \chapentryfonts
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
- \endgroup
- \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
- \secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
- \subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
- \subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno\bgroup#2\egroup}%
-\endgroup}
-
-% Final typesetting of a toc entry; we use the same \entry macro as for
-% the index entries, but we want to suppress hyphenation here. (We
-% can't do that in the \entry macro, since index entries might consist
-% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
-\def\tocentry#1#2{\begingroup
- \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
- % Do not use \turnoffactive in these arguments. Since the toc is
- % typeset in cmr, characters such as _ would come out wrong; we
- % have to do the usual translation tricks.
- \entry{#1}{#2}%
-\endgroup}
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\let\subsecentryfonts = \textfonts
-\let\subsubsecentryfonts = \textfonts
-
-
-\message{environments,}
-% @foo ... @end foo.
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-%
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-%
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% The @error{} command.
-% Adapted from the TeXbook's \boxit.
-%
-\newbox\errorbox
-%
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-%
-\global\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-%
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @tex ... @end tex escapes into raw Tex temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
-
-\def\tex{\begingroup
- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
- \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
- \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
- \catcode `\%=14
- \catcode 43=12 % plus
- \catcode`\"=12
- \catcode`\==12
- \catcode`\|=12
- \catcode`\<=12
- \catcode`\>=12
- \escapechar=`\\
- %
- \let\b=\ptexb
- \let\bullet=\ptexbullet
- \let\c=\ptexc
- \let\,=\ptexcomma
- \let\.=\ptexdot
- \let\dots=\ptexdots
- \let\equiv=\ptexequiv
- \let\!=\ptexexclam
- \let\i=\ptexi
- \let\{=\ptexlbrace
- \let\+=\tabalign
- \let\}=\ptexrbrace
- \let\*=\ptexstar
- \let\t=\ptext
- %
- \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
- \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
- \def\@{@}%
-\let\Etex=\endgroup}
-
-% Define @lisp ... @end lisp.
-% @lisp does a \begingroup so it can rebind things,
-% including the definition of @end lisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments. \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% Make each space character in the input produce a normal interword
-% space in the output. Don't allow a line break at this space, as this
-% is used only in environments like @example, where each line of input
-% should produce a line of output anyway.
-%
-{\obeyspaces %
-\gdef\sepspaces{\obeyspaces\let =\tie}}
-
-% Define \obeyedspace to be our active space, whatever it is. This is
-% for use in \parsearg.
-{\sepspaces%
-\global\let\obeyedspace= }
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical. We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip
-%
-\def\aboveenvbreak{{%
- \ifnum\lastpenalty < 10000
- \advance\envskipamount by \parskip
- \endgraf
- \ifdim\lastskip<\envskipamount
- \removelastskip
- \penalty-50
- \vskip\envskipamount
- \fi
- \fi
-}}
-
-\let\afterenvbreak = \aboveenvbreak
-
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-\font\circle=lcircle10
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-\circthick=\fontdimen8\circle
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-\long\def\cartouche{%
-\begingroup
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt %we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
-% side, and for 6pt waste from
-% each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \hsize=\cartinner
- \kern3pt
- \begingroup
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
-\def\Ecartouche{%
- \endgroup
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
-\endgroup
-}}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\def\nonfillstart{%
- \aboveenvbreak
- \inENV % This group ends at the end of the body
- \hfuzz = 12pt % Don't be fussy
- \sepspaces % Make spaces be word-separators rather than space tokens.
- \singlespace
- \let\par = \lisppar % don't ignore blank lines
- \obeylines % each line of input is a line of output
- \parskip = 0pt
- \parindent = 0pt
- \emergencystretch = 0pt % don't try to avoid overfull boxes
- % @cartouche defines \nonarrowing to inhibit narrowing
- % at next level down.
- \ifx\nonarrowing\relax
- \advance \leftskip by \lispnarrowing
- \exdentamount=\lispnarrowing
- \let\exdent=\nofillexdent
- \let\nonarrowing=\relax
- \fi
-}
-
-% Define the \E... control sequence only if we are inside the particular
-% environment, so the error checking in \end will work.
-%
-% To end an @example-like environment, we first end the paragraph (via
-% \afterenvbreak's vertical glue), and then the group. That way we keep
-% the zero \parskip that the environments set -- \parskip glue will be
-% inserted at the beginning of the next paragraph in the document, after
-% the environment.
-%
-\def\nonfillfinish{\afterenvbreak\endgroup}
-
-% @lisp: indented, narrowed, typewriter font.
-\def\lisp{\begingroup
- \nonfillstart
- \let\Elisp = \nonfillfinish
- \tt
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
-}
-
-% @example: Same as @lisp.
-\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-
-% @small... is usually equivalent to the non-small (@smallbook
-% redefines). We must call \example (or whatever) last in the
-% definition, since it reads the return following the @example (or
-% whatever) command.
-%
-% This actually allows (for example) @end display inside an
-% @smalldisplay. Too bad, but makeinfo will catch the error anyway.
-%
-\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
-\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
-\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
-\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
-
-% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
-% Originally contributed by Pavel@xerox.
-\def\smalllispx{\begingroup
- \def\Esmalllisp{\nonfillfinish\endgroup}%
- \def\Esmallexample{\nonfillfinish\endgroup}%
- \smallexamplefonts
- \lisp
-}
-
-% @display: same as @lisp except keep current font.
-%
-\def\display{\begingroup
- \nonfillstart
- \let\Edisplay = \nonfillfinish
- \gobble
-}
-%
-% @smalldisplay (when @smallbook): @display plus smaller fonts.
-%
-\def\smalldisplayx{\begingroup
- \def\Esmalldisplay{\nonfillfinish\endgroup}%
- \smallexamplefonts \rm
- \display
-}
-
-% @format: same as @display except don't narrow margins.
-%
-\def\format{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eformat = \nonfillfinish
- \gobble
-}
-%
-% @smallformat (when @smallbook): @format plus smaller fonts.
-%
-\def\smallformatx{\begingroup
- \def\Esmallformat{\nonfillfinish\endgroup}%
- \smallexamplefonts \rm
- \format
-}
-
-% @flushleft (same as @format).
-%
-\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
-
-% @flushright.
-%
-\def\flushright{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eflushright = \nonfillfinish
- \advance\leftskip by 0pt plus 1fill
- \gobble
-}
-
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins.
-%
-\def\quotation{%
- \begingroup\inENV %This group ends at the end of the @quotation body
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \singlespace
- \parindent=0pt
- % We have retained a nonzero parskip for the environment, since we're
- % doing normal filling. So to avoid extra space below the environment...
- \def\Equotation{\parskip = 0pt \nonfillfinish}%
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
- \ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
- \advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \let\nonarrowing = \relax
- \fi
-}
-
-
-% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
-% If we want to allow any <char> as delimiter,
-% we need the curly braces so that makeinfo sees the @verb command, eg:
-% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
-%
-% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
-%
-% [Knuth] p. 344; only we need to do '@' too
-\def\dospecials{%
- \do\ \do\\\do\@\do\{\do\}\do\$\do\&%
- \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~}
-%
-% [Knuth] p. 380
-\def\uncatcodespecials{%
- \def\do##1{\catcode`##1=12}\dospecials}
-%
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
- \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
-% Setup for the @verb command.
-%
-% Eight spaces for a tab
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
-\endgroup
-%
-\def\setupverb{%
- \tt % easiest (and conventionally used) font for verbatim
- \def\par{\leavevmode\endgraf}%
- \catcode`\`=\active
- \tabeightspaces
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
-}
-
-% Setup for the @verbatim environment
-%
-% Real tab expansion
-\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
-%
-\def\starttabbox{\setbox0=\hbox\bgroup}
-\begingroup
- \catcode`\^^I=\active
- \gdef\tabexpand{%
- \catcode`\^^I=\active
- \def^^I{\leavevmode\egroup
- \dimen0=\wd0 % the width so far, or since the previous tab
- \divide\dimen0 by\tabw
- \multiply\dimen0 by\tabw % compute previous multiple of \tabw
- \advance\dimen0 by\tabw % advance to next multiple of \tabw
- \wd0=\dimen0 \box0 \starttabbox
- }%
- }
-\endgroup
-\def\setupverbatim{%
- % Easiest (and conventionally used) font for verbatim
- \tt
- \def\par{\leavevmode\egroup\box0\endgraf}%
- \catcode`\`=\active
- \tabexpand
- % Respect line breaks,
- % print special symbols as themselves, and
- % make each space count
- % must do in this order:
- \obeylines \uncatcodespecials \sepspaces
- \everypar{\starttabbox}%
-}
-
-% Do the @verb magic: verbatim text is quoted by unique
-% delimiter characters. Before first delimiter expect a
-% right brace, after last delimiter expect closing brace:
-%
-% \def\doverb'{'<char>#1<char>'}'{#1}
-%
-% [Knuth] p. 382; only eat outer {}
-\begingroup
- \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
- \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
-\endgroup
-%
-\def\verb{\begingroup\setupverb\doverb}
-%
-%
-% Do the @verbatim magic: define the macro \doverbatim so that
-% the (first) argument ends when '@end verbatim' is reached, ie:
-%
-% \def\doverbatim#1@end verbatim{#1}
-%
-% For Texinfo it's a lot easier than for LaTeX,
-% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
-% we need not redefine '\', '{' and '}'
-%
-% Inspired by LaTeX's verbatim command set [latex.ltx]
-%% Include LaTeX hack for completeness -- never know
-%% \begingroup
-%% \catcode`|=0 \catcode`[=1
-%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
-%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
-%% #1|endgroup|def|Everbatim[]|end[verbatim]]
-%% |endgroup
-\begingroup
- \catcode`\ =\active
- \gdef\doverbatim#1@end verbatim{#1\end{verbatim}}
-\endgroup
-%
-\def\verbatim{%
- \def\Everbatim{\nonfillfinish\endgroup}%
- \begingroup
- \nonfillstart
- \advance\leftskip by -\defbodyindent
- \begingroup\setupverbatim\doverbatim
-}
-
-% @verbatiminclude FILE - insert text of file in verbatim environment.
-%
-% Allow normal characters that we make active in the argument (a file name).
-\def\verbatiminclude{%
- \begingroup
- \catcode`\\=12
- \catcode`~=12
- \catcode`^=12
- \catcode`_=12
- \catcode`|=12
- \catcode`<=12
- \catcode`>=12
- \catcode`+=12
- \parsearg\doverbatiminclude
-}
-\def\setupverbatiminclude{%
- \begingroup
- \nonfillstart
- \advance\leftskip by -\defbodyindent
- \begingroup\setupverbatim
-}
-%
-\def\doverbatiminclude#1{%
- % Restore active chars for included file.
- \endgroup
- \begingroup
- \def\thisfile{#1}%
- \expandafter\expandafter\setupverbatiminclude\input\thisfile
- \endgroup\nonfillfinish\endgroup
-}
-
-% @copying ... @end copying.
-% Save the text away for @insertcopying later.
-%
-\newbox\copyingbox
-%
-\def\copying{\begingroup
- \parindent = 0pt % looks wrong on title page
- \def\Ecopying{\egroup\endgroup}%
- \global\setbox\copyingbox = \vbox\bgroup
-}
-
-% @insertcopying.
-%
-\def\insertcopying{\unvcopy\copyingbox}
-
-
-\message{defuns,}
-% @defun etc.
-
-% Allow user to change definition object font (\df) internally
-\def\setdeffont #1 {\csname DEF#1\endcsname}
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deftypemargin \deftypemargin=12pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-
-\newcount\parencount
-% define \functionparens, which makes ( and ) and & do special things.
-% \functionparens affects the group it is contained in.
-\def\activeparens{%
-\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
-\catcode`\[=\active \catcode`\]=\active}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-\global\let(=\lparen \global\let)=\rparen
-\global\let[=\lbrack \global\let]=\rbrack
-
-\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
-\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-% This is used to turn on special parens
-% but make & act ordinary (given that it's active).
-\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
-
-% Definitions of (, ) and & used in args for functions.
-% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
- \global\advance\parencount by 1
-}
-%
-% This is the definition of ( when already inside a level of parens.
-\gdef\opnested{\char`\(\global\advance\parencount by 1 }
-%
-\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
- % also in that case restore the outer-level definition of (.
- \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
- \global\advance \parencount by -1 }
-% If we encounter &foo, then turn on ()-hacking afterwards
-\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
-%
-\gdef\normalparens{\boldbrax\let&=\ampnr}
-} % End of definition inside \activeparens
-%% These parens (in \boldbrax) actually are a little bolder than the
-%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\let\ampnr = \&
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
-
-% Active &'s sneak into the index arguments, so make sure it's defined.
-{
- \catcode`& = 13
- \global\let& = \ampnr
-}
-
-% First, defname, which formats the header line itself.
-% #1 should be the function name.
-% #2 should be the type of definition, such as "Function".
-
-\def\defname #1#2{%
-% Get the values of \leftskip and \rightskip as they were
-% outside the @def...
-\dimen2=\leftskip
-\advance\dimen2 by -\defbodyindent
-\noindent
-\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
-\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
-\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
-\parshape 2 0in \dimen0 \defargsindent \dimen1
-% Now output arg 2 ("Function" or some such)
-% ending at \deftypemargin from the right margin,
-% but stuck inside a box of width 0 so it does not interfere with linebreaking
-{% Adjust \hsize to exclude the ambient margins,
-% so that \rightline will obey them.
-\advance \hsize by -\dimen2
-\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
-% Make all lines underfull and no complaints:
-\tolerance=10000 \hbadness=10000
-\advance\leftskip by -\defbodyindent
-\exdentamount=\defbodyindent
-{\df #1}\enskip % Generate function name
-}
-
-% Common pieces to start any @def...
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence (which our caller defines).
-% #3 is the control sequence to process the header, such as \defunheader.
-%
-\def\parsebodycommon#1#2#3{%
- \begingroup\inENV
- % If there are two @def commands in a row, we'll have a \nobreak,
- % which is there to keep the function description together with its
- % header. But if there's nothing but headers, we want to allow a
- % break after all.
- \ifnum\lastpenalty = 10000 \penalty0 \fi
- \medbreak
- %
- % Define the \E... end token that this defining construct specifies
- % so that it will exit this group.
- \def#1{\endgraf\endgroup\medbreak}%
- %
- \parindent=0in
- \advance\leftskip by \defbodyindent
- \exdentamount=\defbodyindent
-}
-
-% Process body of @defun, @deffn, @defmac, etc.
-%
-\def\defparsebody#1#2#3{%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
- \catcode61=\active % 61 is `='
- \begingroup\obeylines\activeparens
- \spacesplit#3%
-}
-
-% #1, #2, #3 are the common arguments (see \defparsebody).
-% #4, delimited by the space, is the class name.
-%
-\def\defmethparsebody#1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#4}}%
-}
-
-% Used for @deftypemethod and @deftypeivar.
-% #1, #2, #3 are the common arguments (see \defparsebody).
-% #4, delimited by a space, is the class name.
-% #5 is the method's return type.
-%
-\def\deftypemethparsebody#1#2#3#4 #5 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#4}{#5}}%
-}
-
-% Used for @deftypeop. The change from \deftypemethparsebody is an
-% extra argument at the beginning which is the `category', instead of it
-% being the hardwired string `Method' or `Instance Variable'. We have
-% to account for this both in the \...x definition and in parsing the
-% input at hand. Thus also need a control sequence (passed as #5) for
-% the \E... definition to assign the category name to.
-%
-\def\deftypeopparsebody#1#2#3#4#5 #6 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 ##3 {%
- \def#4{##1}%
- \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#5}{#6}}%
-}
-
-% For @defop.
-\def\defopparsebody #1#2#3#4#5 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 {\def#4{##1}%
- \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
- \begingroup\obeylines\activeparens
- \spacesplit{#3{#5}}%
-}
-
-% These parsing functions are similar to the preceding ones
-% except that they do not make parens into active characters.
-% These are used for "variables" since they have no arguments.
-%
-\def\defvarparsebody #1#2#3{%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2{\begingroup\obeylines\spacesplit#3}%
- \catcode61=\active %
- \begingroup\obeylines
- \spacesplit#3%
-}
-
-% @defopvar.
-\def\defopvarparsebody #1#2#3#4#5 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 ##2 {\def#4{##1}%
- \begingroup\obeylines\spacesplit{#3{##2}}}%
- \begingroup\obeylines
- \spacesplit{#3{#5}}%
-}
-
-\def\defvrparsebody#1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
- \begingroup\obeylines
- \spacesplit{#3{#4}}%
-}
-
-% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
-% type is just `struct', because we lose the braces in `{struct
-% termios}' when \spacesplit reads its undelimited argument. Sigh.
-% \let\deftpparsebody=\defvrparsebody
-%
-% So, to get around this, we put \empty in with the type name. That
-% way, TeX won't find exactly `{...}' as an undelimited argument, and
-% won't strip off the braces.
-%
-\def\deftpparsebody #1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
- \begingroup\obeylines
- \spacesplit{\parsetpheaderline{#3{#4}}}\empty
-}
-
-% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any). That's what this does.
-%
-\def\removeemptybraces\empty#1\relax{#1}
-
-% After \spacesplit has done its work, this is called -- #1 is the final
-% thing to call, #2 the type name (which starts with \empty), and #3
-% (which might be empty) the arguments.
-%
-\def\parsetpheaderline#1#2#3{%
- #1{\removeemptybraces#2\relax}{#3}%
-}%
-
-% Split up #2 at the first space token.
-% call #1 with two arguments:
-% the first is all of #2 before the space token,
-% the second is all of #2 after that space token.
-% If #2 contains no space token, all of it is passed as the first arg
-% and the second is passed as empty.
-%
-{\obeylines
-\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
-\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
-\ifx\relax #3%
-#1{#2}{}\else #1{#2}{#3#4}\fi}}
-
-% Define @defun.
-
-% First, define the processing that is wanted for arguments of \defun
-% Use this to expand the args and terminate the paragraph they make up
-
-\def\defunargs#1{\functionparens \sl
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Set the font temporarily and use \font in case \setfont made \tensl a macro.
-{\tensl\hyphenchar\font=0}%
-#1%
-{\tensl\hyphenchar\font=45}%
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
-\interlinepenalty=10000
-\advance\rightskip by 0pt plus 1fil
-\endgraf\nobreak\vskip -\parskip\nobreak
-}
-
-\def\deftypefunargs #1{%
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Use \boldbraxnoamp, not \functionparens, so that & is not special.
-\boldbraxnoamp
-\tclose{#1}% avoid \code because of side effects on active chars
-\interlinepenalty=10000
-\advance\rightskip by 0pt plus 1fil
-\endgraf\nobreak\vskip -\parskip\nobreak
-}
-
-% Do complete processing of one @defun or @defunx line already parsed.
-
-% @deffn Command forward-char nchars
-
-\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
-
-\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defun == @deffn Function
-
-\def\defun{\defparsebody\Edefun\defunx\defunheader}
-
-\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDeffunc}%
-\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @deftypefun int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
-
-% #1 is the data type. #2 is the name and args.
-\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
-% #1 is the data type, #2 the name, #3 the args.
-\def\deftypefunheaderx #1#2 #3\relax{%
-\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
-\deftypefunargs {#3}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
-
-% \defheaderxcond#1\relax$.$
-% puts #1 in @code, followed by a space, but does nothing if #1 is null.
-\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
-
-% #1 is the classification. #2 is the data type. #3 is the name and args.
-\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
-% #1 is the classification, #2 the data type, #3 the name, #4 the args.
-\def\deftypefnheaderx #1#2#3 #4\relax{%
-\doind {fn}{\code{#3}}% Make entry in function index
-\begingroup
-\normalparens % notably, turn off `&' magic, which prevents
-% at least some C++ text from working
-\defname {\defheaderxcond#2\relax$.$#3}{#1}%
-\deftypefunargs {#4}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defmac == @deffn Macro
-
-\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
-
-\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefmac}%
-\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defspec == @deffn Special Form
-
-\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
-
-\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{\putwordDefspec}%
-\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defop CATEGORY CLASS OPERATION ARG...
-%
-\def\defop #1 {\def\defoptype{#1}%
-\defopparsebody\Edefop\defopx\defopheader\defoptype}
-%
-\def\defopheader#1#2#3{%
-\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
-\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}%
-\defunargs {#3}\endgroup %
-}
-
-% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
-%
-\def\deftypeop #1 {\def\deftypeopcategory{#1}%
- \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
- \deftypeopcategory}
-%
-% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
-\def\deftypeopheader#1#2#3#4{%
- \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{\defheaderxcond#2\relax$.$#3}
- {\deftypeopcategory\ \putwordon\ \code{#1}}%
- \deftypefunargs{#4}%
- \endgroup
-}
-
-% @deftypemethod CLASS TYPE METHOD ARG...
-%
-\def\deftypemethod{%
- \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
-%
-% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
-\def\deftypemethodheader#1#2#3#4{%
- \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
- \deftypefunargs{#4}%
- \endgroup
-}
-
-% @deftypeivar CLASS TYPE VARNAME
-%
-\def\deftypeivar{%
- \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
-%
-% #1 is the class name, #2 the data type, #3 the variable name.
-\def\deftypeivarheader#1#2#3{%
- \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
- \begingroup
- \defname{\defheaderxcond#2\relax$.$#3}
- {\putwordInstanceVariableof\ \code{#1}}%
- \defvarargs{#3}%
- \endgroup
-}
-
-% @defmethod == @defop Method
-%
-\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-%
-% #1 is the class name, #2 the method name, #3 the args.
-\def\defmethodheader#1#2#3{%
- \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{#2}{\putwordMethodon\ \code{#1}}%
- \defunargs{#3}%
- \endgroup
-}
-
-% @defcv {Class Option} foo-class foo-flag
-
-\def\defcv #1 {\def\defcvtype{#1}%
-\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
-
-\def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
-\defvarargs {#3}\endgroup %
-}
-
-% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
-%
-\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-%
-\def\defivarheader#1#2#3{%
- \dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index
- \begingroup
- \defname{#2}{\putwordInstanceVariableof\ #1}%
- \defvarargs{#3}%
- \endgroup
-}
-
-% @defvar
-% First, define the processing that is wanted for arguments of @defvar.
-% This is actually simple: just print them in roman.
-% This must expand the args and terminate the paragraph they make up
-\def\defvarargs #1{\normalparens #1%
-\interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak}
-
-% @defvr Counter foo-count
-
-\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
-
-\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
-
-% @defvar == @defvr Variable
-
-\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
-
-\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefvar}%
-\defvarargs {#2}\endgroup %
-}
-
-% @defopt == @defvr {User Option}
-
-\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
-
-\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{\putwordDefopt}%
-\defvarargs {#2}\endgroup %
-}
-
-% @deftypevar int foobar
-
-\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-
-% #1 is the data type. #2 is the name, perhaps followed by text that
-% is actually part of the data type, which should not be put into the index.
-\def\deftypevarheader #1#2{%
-\dovarind#2 \relax% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
-\interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak
-\endgroup}
-\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
-
-% @deftypevr {Global Flag} int enable
-
-\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-
-\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
-\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
-\interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak
-\endgroup}
-
-% Now define @deftp
-% Args are printed in bold, a slight difference from @defvar.
-
-\def\deftpargs #1{\bf \defvarargs{#1}}
-
-% @deftp Class window height width ...
-
-\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
-
-\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
-\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
-
-% These definitions are used if you use @defunx (etc.)
-% anywhere other than immediately after a @defun or @defunx.
-%
-\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
-\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
-\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
-\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
-\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\defopx#1 {\errmessage{@defopx in invalid context}}
-\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
-\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
-\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
-\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
-\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
-\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
-\def\defunx#1 {\errmessage{@defunx in invalid context}}
-\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
-\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scanmacro#1{%
- \begingroup \newlinechar`\^^M
- % Undo catcode changes of \startcontents and \doprintindex
- \catcode`\@=0 \catcode`\\=12 \escapechar=`\@
- % Append \endinput to make sure that TeX does not see the ending newline.
- \toks0={#1\endinput}%
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{\the\toks0}%
- \immediate\closeout\macscribble
- \let\xeatspaces\eatspaces
- \input \jobname.tmp
- \endgroup
-}
-\else
-\def\scanmacro#1{%
-\begingroup \newlinechar`\^^M
-% Undo catcode changes of \startcontents and \doprintindex
-\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
-\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
-\fi
-
-\newcount\paramno % Count of parameters
-\newtoks\macname % Macro name
-\newif\ifrecursive % Is it recursive?
-\def\macrolist{} % List of all defined macros in the form
- % \do\macro1\do\macro2...
-
-% Utility routines.
-% Thisdoes \let #1 = #2, except with \csnames.
-\def\cslet#1#2{%
-\expandafter\expandafter
-\expandafter\let
-\expandafter\expandafter
-\csname#1\endcsname
-\csname#2\endcsname}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=12\catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-
-\def\macrobodyctxt{%
- \catcode`\~=12
- \catcode`\^=12
- \catcode`\_=12
- \catcode`\|=12
- \catcode`\<=12
- \catcode`\>=12
- \catcode`\+=12
- \catcode`\{=12
- \catcode`\}=12
- \catcode`\@=12
- \catcode`\^^M=12
- \usembodybackslash}
-
-\def\macroargctxt{%
- \catcode`\~=12
- \catcode`\^=12
- \catcode`\_=12
- \catcode`\|=12
- \catcode`\<=12
- \catcode`\>=12
- \catcode`\+=12
- \catcode`\@=12
- \catcode`\\=12}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
- \getargs{#1}% now \macname is the macname and \argl the arglist
- \ifx\argl\empty % no arguments
- \paramno=0%
- \else
- \expandafter\parsemargdef \argl;%
- \fi
- \if1\csname ismacro.\the\macname\endcsname
- \message{Warning: redefining \the\macname}%
- \else
- \expandafter\ifx\csname \the\macname\endcsname \relax
- \else \errmessage{Macro name \the\macname\space already defined}\fi
- \global\cslet{macsave.\the\macname}{\the\macname}%
- \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
- % Add the macroname to \macrolist
- \toks0 = \expandafter{\macrolist\do}%
- \xdef\macrolist{\the\toks0
- \expandafter\noexpand\csname\the\macname\endcsname}%
- \fi
- \begingroup \macrobodyctxt
- \ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
- \fi}
-
-\def\unmacro{\parsearg\unmacroxxx}
-\def\unmacroxxx#1{%
- \if1\csname ismacro.#1\endcsname
- \global\cslet{#1}{macsave.#1}%
- \global\expandafter\let \csname ismacro.#1\endcsname=0%
- % Remove the macro name from \macrolist
- \begingroup
- \edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
- \def\do##1{%
- \def\tempb{##1}%
- \ifx\tempa\tempb
- % remove this
- \else
- \toks0 = \expandafter{\newmacrolist\do}%
- \edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
- \fi}%
- \def\newmacrolist{}%
- % Execute macro list to define \newmacrolist
- \macrolist
- \global\let\macrolist\newmacrolist
- \endgroup
- \else
- \errmessage{Macro #1 not defined}%
- \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
-
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
- \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
-\def\parsemargdefxxx#1,{%
- \if#1;\let\next=\relax
- \else \let\next=\parsemargdefxxx
- \advance\paramno by 1%
- \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
- \edef\paramlist{\paramlist\hash\the\paramno,}%
- \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-\def\defmacro{%
- \let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
- \fi
- \else
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \fi
- \fi}
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
- \fi \next}
-
-% We mant to disable all macros during \shipout so that they are not
-% expanded by \write.
-\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
- \edef\next{\macrolist}\expandafter\endgroup\next}
-
-
-% @alias.
-% We need some trickery to remove the optional spaces around the equal
-% sign. Just make them active and then expand them all to nothing.
-\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
-\def\aliasxxx #1{\aliasyyy#1\relax}
-\def\aliasyyy #1=#2\relax{\ignoreactivespaces
-\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
- \expandafter\noexpand\csname#2\endcsname}%
-\expandafter\endgroup\next}
-
-
-\message{cross references,}
-% @xref etc.
-
-\newwrite\auxfile
-
-\newif\ifhavexrefs % True if xref values are known.
-\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-% @node's job is to define \lastnode.
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx [#1,]}
-\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
-\let\nwnode=\node
-\let\lastnode=\relax
-
-% The sectioning commands (@chapter, etc.) call these.
-\def\donoderef{%
- \ifx\lastnode\relax\else
- \expandafter\expandafter\expandafter\setref{\lastnode}%
- {Ysectionnumberandtype}%
- \global\let\lastnode=\relax
- \fi
-}
-\def\unnumbnoderef{%
- \ifx\lastnode\relax\else
- \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
- \global\let\lastnode=\relax
- \fi
-}
-\def\appendixnoderef{%
- \ifx\lastnode\relax\else
- \expandafter\expandafter\expandafter\setref{\lastnode}%
- {Yappendixletterandtype}%
- \global\let\lastnode=\relax
- \fi
-}
-
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\newcount\savesfregister
-\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
-\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
-\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
-% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have
-% to set \indexdummies so commands such as @code in a section title
-% aren't expanded. It would be nicer not to expand the titles in the
-% first place, but there's so many layers that that is hard to do.
-%
-\def\setref#1#2{{%
- \indexdummies
- \pdfmkdest{#1}%
- \dosetq{#1-title}{Ytitle}%
- \dosetq{#1-pg}{Ypagenumber}%
- \dosetq{#1-snt}{#2}%
-}}
-
-% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual. All but the node name can be omitted.
-%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
- \unsepspaces
- \def\printedmanual{\ignorespaces #5}%
- \def\printednodename{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual}%
- \setbox0=\hbox{\printednodename}%
- \ifdim \wd0 = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
- % Use the node name inside the square brackets.
- \def\printednodename{\ignorespaces #1}%
- \else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
- \def\printednodename{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We know the real title if we have the xref values.
- \def\printednodename{\refx{#1-title}{}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printednodename{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifpdf
- \leavevmode
- \getfilename{#4}%
- {\normalturnoffactive
- \ifnum\filenamelength>0
- \startlink attr{/Border [0 0 0]}%
- goto file{\the\filename.pdf} name{#1}%
- \else
- \startlink attr{/Border [0 0 0]}%
- goto name{#1}%
- \fi
- }%
- \linkcolor
- \fi
- %
- \ifdim \wd1 > 0pt
- \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
- \else
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\normalturnoffactive
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % [mynode],
- [\printednodename],\space
- % page 3
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- \fi
- \endlink
-\endgroup}
-
-% \dosetq is the interface for calls from other macros
-
-% Use \normalturnoffactive so that punctuation chars such as underscore
-% and backslash work in node names. (\turnoffactive doesn't do \.)
-\def\dosetq#1#2{%
- {\let\folio=0%
- \normalturnoffactive
- \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
- \iflinks
- \next
- \fi
- }%
-}
-
-% \internalsetq {foo}{page} expands into
-% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
-% When the aux file is read, ' is the escape character
-
-\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
-
-% Things to be expanded by \internalsetq
-
-\def\Ypagenumber{\folio}
-
-\def\Ytitle{\thissection}
-
-\def\Ynothing{}
-
-\def\Ysectionnumberandtype{%
-\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
-\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
-\else %
-\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\def\Yappendixletterandtype{%
-\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
-\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
-\else %
-\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\gdef\xreftie{'tie}
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Non-3.0.
-\else
- \def\linenumber{\the\inputlineno:\space}
-\fi
-
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-
-\def\refx#1#2{%
- \expandafter\ifx\csname X#1\endcsname\relax
- % If not defined, say something at least.
- \angleleft un\-de\-fined\angleright
- \iflinks
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
- \fi
- \fi
- \fi
- \else
- % It's defined, so just use it.
- \csname X#1\endcsname
- \fi
- #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file.
-%
-\def\xrdef#1{\begingroup
- % Reenable \ as an escape while reading the second argument.
- \catcode`\\ = 0
- \afterassignment\endgroup
- \expandafter\gdef\csname X#1\endcsname
-}
-
-% Read the last existing aux file, if any. No error if none exists.
-\def\readauxfile{\begingroup
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- \catcode`\@=\other
- \catcode`\^=\other
- % It was suggested to define this as 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
- % Make the characters 128-255 be printing characters
- {%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
- }%
- }%
- % The aux file uses ' as the escape (for now).
- % Turn off \ as an escape so we do not lose on
- % entries which were dumped with control sequences in their names.
- % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
- % Reference to such entries still does not work the way one would wish,
- % but at least they do not bomb out when the aux file is read in.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\%=\other
- \catcode`\'=0
- \catcode`\\=\other
- %
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \closein 1
- \input \jobname.aux
- \global\havexrefstrue
- \global\warnedobstrue
- \fi
- % Open the new aux file. TeX will close it automatically at exit.
- \openout\auxfile=\jobname.aux
-\endgroup}
-
-
-% Footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for info output only.
-\let\footnotestyle=\comment
-
-\let\ptexfootnote=\footnote
-
-{\catcode `\@=11
-%
-% Auto-number footnotes. Otherwise like plain.
-\gdef\footnote{%
- \global\advance\footnoteno by \@ne
- \edef\thisfootno{$^{\the\footnoteno}$}%
- %
- % In case the footnote comes at the end of a sentence, preserve the
- % extra spacing after we do the footnote number.
- \let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
- %
- % Remove inadvertent blank space before typesetting the footnote number.
- \unskip
- \thisfootno\@sf
- \footnotezzz
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter. Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset and anything else that uses
-% \parseargline fail inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-\long\gdef\footnotezzz{\insert\footins\bgroup
- % We want to typeset this text as a normal paragraph, even if the
- % footnote reference occurs in (for example) a display environment.
- % So reset some parameters.
- \interlinepenalty\interfootnotelinepenalty
- \splittopskip\ht\strutbox % top baseline for broken footnotes
- \splitmaxdepth\dp\strutbox
- \floatingpenalty\@MM
- \leftskip\z@skip
- \rightskip\z@skip
- \spaceskip\z@skip
- \xspaceskip\z@skip
- \parindent\defaultparindent
- %
- \smallfonts \rm
- %
- % Because we use hanging indentation in footnotes, a @noindent appears
- % to exdent this text, so make it be a no-op. makeinfo does not use
- % hanging indentation so @noindent can still be needed within footnote
- % text after an @example or the like (not that this is good style).
- \let\noindent = \relax
- %
- % Hang the footnote text off the number. Use \everypar in case the
- % footnote extends for more than one paragraph.
- \everypar = {\hang}%
- \textindent{\thisfootno}%
- %
- % Don't crash into the line above the footnote text. Since this
- % expands into a box, it must come within the paragraph, lest it
- % provide a place where TeX can split the footnote.
- \footstrut
- \futurelet\next\fo@t
-}
-\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
- \else\let\next\f@t\fi \next}
-\def\f@@t{\bgroup\aftergroup\@foot\let\next}
-\def\f@t#1{#1\@foot}
-\def\@foot{\strut\par\egroup}
-
-}%end \catcode `\@=11
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
- \closein 1
- % Do not bother showing banner with post-v2.7 epsf.tex (available in
- % doc/epsf.tex until it shows up on ctan).
- \def\epsfannounce{\toks0 = }%
- \input epsf.tex
-\fi
-%
-% We will only complain once about lack of epsf.tex.
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://tug.org/tex/epsf.tex.}
-%
-\def\image#1{%
- \ifx\epsfbox\undefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is (ignored optional) html alt text.
-% #5 is (ignored optional) extension.
-% #6 is just the usual extra ignored arg for parsing this stuff.
-\newif\ifimagevmode
-\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
- \catcode`\^^M = 5 % in case we're inside an example
- \normalturnoffactive % allow _ et al. in names
- % If the image is by itself, center it.
- \ifvmode
- \imagevmodetrue
- \nobreak\bigskip
- % Usually we'll have text after the image which will insert
- % \parskip glue, so insert it here too to equalize the space
- % above and below.
- \nobreak\vskip\parskip
- \nobreak
- \line\bgroup\hss
- \fi
- %
- % Output the image.
- \ifpdf
- \dopdfimage{#1}{#2}{#3}%
- \else
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- \epsfbox{#1.eps}%
- \fi
- %
- \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
-\endgroup}
-
-
-\message{localization,}
-% and i18n.
-
-% @documentlanguage is usually given very early, just after
-% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language abbreviation.
-% It would be nice if we could set up a hyphenation file here.
-%
-\def\documentlanguage{\parsearg\dodocumentlanguage}
-\def\dodocumentlanguage#1{%
- \tex % read txi-??.tex file in plain TeX.
- % Read the file if it exists.
- \openin 1 txi-#1.tex
- \ifeof1
- \errhelp = \nolanghelp
- \errmessage{Cannot read language file txi-#1.tex}%
- \let\temp = \relax
- \else
- \def\temp{\input txi-#1.tex }%
- \fi
- \temp
- \endgroup
-}
-\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty. Maybe you need to install it? In the current directory
-should work if nowhere else does.}
-
-
-% @documentencoding should change something in TeX eventually, most
-% likely, but for now just recognize it.
-\let\documentencoding = \comment
-
-
-% Page size parameters.
-%
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
-
-% Following George Bush, just get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything. We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize. We call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
- \ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
- \else
- \emergencystretch = .15\hsize
- \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip. We also call
-% \setleading{\textleading}, so the caller should define \textleading.
-% The caller should also set \parskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6{%
- \voffset = #3\relax
- \topskip = #6\relax
- \splittopskip = \topskip
- %
- \vsize = #1\relax
- \advance\vsize by \topskip
- \outervsize = \vsize
- \advance\outervsize by 2\topandbottommargin
- \pageheight = \vsize
- %
- \hsize = #2\relax
- \outerhsize = \hsize
- \advance\outerhsize by 0.5in
- \pagewidth = \hsize
- %
- \normaloffset = #4\relax
- \bindingoffset = #5\relax
- %
- \setleading{\textleading}
- %
- \parindent = \defaultparindent
- \setemergencystretch
-}
-
-% Use `small' versions.
-%
-\def\smallenvironments{%
- \let\smalldisplay = \smalldisplayx
- \let\smallexample = \smalllispx
- \let\smallformat = \smallformatx
- \let\smalllisp = \smalllispx
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % If page is nothing but text, make it come out even.
- \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
-\def\smallbook{{\globaldefs = 1
- \parskip = 2pt plus 1pt
- \textleading = 12pt
- %
- \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
- %
- \lispnarrowing = 0.3in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \deftypemargin = 0pt
- \defbodyindent = .5cm
- \smallenvironments
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \textleading = 13.2pt
- %
- % Double-side printing via postscript on Laserjet 4050
- % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
- % To change the settings for a different printer or situation, adjust
- % \normaloffset until the front-side and back-side texts align. Then
- % do the same for \bindingoffset. You can set these for testing in
- % your texinfo source file like this:
- % @tex
- % \global\normaloffset = -6mm
- % \global\bindingoffset = 10mm
- % @end tex
- \internalpagesizes{51\baselineskip}{160mm}{\voffset}{\hoffset}%
- {\bindingoffset}{44pt}%
- %
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \deftypemargin = 0pt
- \defbodyindent = 5mm
-}}
-
-% Use @afivepaper to print on European A5 paper.
-% From romildo@urano.iceb.ufop.br, 2 July 2000.
-% He also recommends making @example and @lisp be small.
-\def\afivepaper{{\globaldefs = 1
- \parskip = 2pt plus 1pt minus 0.1pt
- \textleading = 12.5pt
- %
- \internalpagesizes{160mm}{120mm}{\voffset}{\hoffset}{\bindingoffset}{8pt}%
- %
- \lispnarrowing = 0.2in
- \tolerance = 800
- \hfuzz = 1.2pt
- \contentsrightmargin = 0pt
- \deftypemargin = 0pt
- \defbodyindent = 2mm
- \tableindent = 12mm
- %
- \smallenvironments
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper.
-\def\afourlatex{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{237mm}{150mm}{\voffset}{4.6mm}{\bindingoffset}{7mm}%
- %
- % Must explicitly reset to 0 because we call \afourpaper.
- \globaldefs = 0
-}}
-
-% Use @afourwide to print on A4 paper in wide format.
-\def\afourwide{{\globaldefs = 1
- \afourpaper
- \internalpagesizes{241mm}{165mm}{\voffset}{-2.95mm}{\bindingoffset}{7mm}%
- \globaldefs = 0
-}}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\def\pagesizes{\parsearg\pagesizesxxx}
-\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
- \globaldefs = 1
- %
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{\textleading}%
- %
- \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-
-\message{and turning on texinfo input format.}
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\catcode`\$=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-\def\normaldollar{$}%$ font-lock fix
-
-% This macro is used to make a character print one way in ttfont
-% where it can probably just be output, and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-
-% Same as above, but check for italic font. Actually this also catches
-% non-italic slanted fonts since it is impossible to distinguish them from
-% italic fonts. But since this is only used by $ and it uses \sl anyway
-% this is not a problem.
-\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
-
-% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary).
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
-\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-% Subroutine for the previous macro.
-\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
-
-\catcode`\|=\active
-\def|{{\tt\char124}}
-\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
-\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-\catcode`\$=\active
-\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
-%\catcode 27=\active
-%\def^^[{$\diamondsuit$}
-
-% Set up an active definition for =, but don't enable it most of the time.
-{\catcode`\==\active
-\global\def={{\tt \char 61}}}
-
-\catcode`+=\active
-\catcode`\_=\active
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
-\catcode`\@=0
-
-% \rawbackslashxx output one backslash character in current font
-\global\chardef\rawbackslashxx=`\\
-%{\catcode`\\=\other
-%@gdef@rawbackslashxx{\}}
-
-% \rawbackslash redefines \ as input to do \rawbackslashxx.
-{\catcode`\\=\active
-@gdef@rawbackslash{@let\=@rawbackslashxx }}
-
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\rawbackslashxx}}
-
-% \catcode 17=0 % Define control-q
-\catcode`\\=\active
-
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{@let"=@normaldoublequote
-@let\=@realbackslash
-@let~=@normaltilde
-@let^=@normalcaret
-@let_=@normalunderscore
-@let|=@normalverticalbar
-@let<=@normalless
-@let>=@normalgreater
-@let+=@normalplus
-@let$=@normaldollar}%$ font-lock fix
-
-% Same as @turnoffactive except for \.
-@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
-
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
-@otherifyactive
-
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-%
-@gdef@eatinput input texinfo{@fixbackslash}
-@global@let\ = @eatinput
-
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also back turn on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
-@gdef@fixbackslash{%
- @ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active
- @catcode`@_=@active
-}
-
-% Say @foo, not \foo, in error messages.
-@escapechar = `@@
-
-% These look ok in all fonts, so just make them not special.
-@catcode`@& = @other
-@catcode`@# = @other
-@catcode`@% = @other
-
-@c Set initial fonts.
-@textfonts
-@rm
-
-
-@c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
-@c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d.%02H"
-@c time-stamp-end: "}"
-@c End:
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
/*
* PURPOSE
#include "gzip.h"
#ifdef RCSID
-static char rcsid[] = "$Id: trees.c,v 0.12 1993/06/10 13:27:54 jloup Exp $";
+static char rcsid[] = "$Id: trees.c,v 1.4 2006/11/20 08:40:33 eggert Exp $";
#endif
/* ===========================================================================
file_type = attr;
file_method = methodp;
compressed_len = input_len = 0L;
-
+
if (static_dtree[0].Len != 0) return; /* ct_init already called */
/* Initialize the mapping length (0..255) -> length code (0..28) */
if (stored_len <= opt_lenb && eof && compressed_len == 0L && seekable()) {
#endif
/* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
- if (buf == (char*)0) error ("block vanished");
+ if (!buf)
+ gzip_error ("block vanished");
copy_block(buf, (unsigned)stored_len, 0); /* without header */
compressed_len = stored_len << 3;
*/
#ifdef RCSID
-static char rcsid[] = "$Id: unlzh.c,v 1.2 1993/06/24 10:59:01 jloup Exp $";
+static char rcsid[] = "$Id: unlzh.c,v 1.4 2006/11/20 08:40:34 eggert Exp $";
#endif
#include <config.h>
#define NT (CODE_BIT + 3)
#define PBIT 4 /* smallest integer such that (1U << PBIT) > NP */
#define TBIT 5 /* smallest integer such that (1U << TBIT) > NT */
-#define NPT (1<<TBIT)
+#define NPT (1 << TBIT)
/* local ush left[2 * NC - 1]; */
/* local ush right[2 * NC - 1]; */
for (i = 1; i <= 16; i++)
start[i + 1] = start[i] + (count[i] << (16 - i));
if ((start[17] & 0xffff) != 0)
- error("Bad table\n");
+ gzip_error ("Bad table\n");
jutbits = 16 - tablebits;
for (i = 1; i <= (unsigned)tablebits; i++) {
if ((len = bitlen[ch]) == 0) continue;
nextcode = start[len] + weight[len];
if (len <= (unsigned)tablebits) {
- if (nextcode > 1 << tablebits)
- error("Bad table\n");
+ if ((unsigned) 1 << tablebits < nextcode)
+ gzip_error ("Bad table\n");
for (i = start[len]; i < nextcode; i++) table[i] = ch;
} else {
k = start[len];
if (c == 7) {
mask = (unsigned) 1 << (BITBUFSIZ - 1 - 3);
while (mask & bitbuf) { mask >>= 1; c++; }
- if (c > 16)
- error("Bad table\n");
+ if (16 < c)
+ gzip_error ("Bad table\n");
}
fillbuf((c < 7) ? 3 : c - 3);
pt_len[i++] = c;
*/
#ifdef RCSID
-static char rcsid[] = "$Id: unlzw.c,v 0.15 1993/06/10 13:28:35 jloup Exp $";
+static char rcsid[] = "$Id: unlzw.c,v 1.5 2006/12/11 18:54:39 eggert Exp $";
#endif
#include <config.h>
typedef unsigned long cmp_code_int;
#define MAXCODE(n) (1L << (n))
-
+
#ifndef REGISTERS
# define REGISTERS 2
#endif
-#define REG1
-#define REG2
-#define REG3
-#define REG4
-#define REG5
-#define REG6
-#define REG7
-#define REG8
-#define REG9
+#define REG1
+#define REG2
+#define REG3
+#define REG4
+#define REG5
+#define REG6
+#define REG7
+#define REG8
+#define REG9
#define REG10
-#define REG11
-#define REG12
+#define REG11
+#define REG12
#define REG13
#define REG14
#define REG15
# undef REG16
# define REG16 register
#endif
-
+
#ifndef BYTEORDER
# define BYTEORDER 0000
#endif
-
+
#ifndef NOALLIGN
# define NOALLIGN 0
#endif
* The magic header has already been checked and skipped.
* bytes_in and bytes_out have been initialized.
*/
-int unlzw(in, out)
+int unlzw(in, out)
int in, out; /* input and output file descriptors */
{
REG2 char_type *stackp;
REG14 code_int maxmaxcode;
REG15 int n_bits;
REG16 int rsize;
-
+
#ifdef MAXSEG_64K
tab_prefix[0] = tab_prefix0;
tab_prefix[1] = tab_prefix1;
block_mode = maxbits & BLOCK_MODE;
if ((maxbits & LZW_RESERVED) != 0) {
WARN((stderr, "\n%s: %s: warning, unknown flags 0x%x\n",
- progname, ifname, maxbits & LZW_RESERVED));
+ program_name, ifname, maxbits & LZW_RESERVED));
}
maxbits &= BIT_MASK;
maxmaxcode = MAXCODE(maxbits);
-
+
if (maxbits > BITS) {
fprintf(stderr,
"\n%s: %s: compressed with %d bits, can only handle %d bits\n",
- progname, ifname, maxbits, BITS);
+ program_name, ifname, maxbits, BITS);
exit_code = ERROR;
return ERROR;
}
posbits = inptr<<3;
free_ent = ((block_mode) ? FIRST : 256);
-
+
clear_tab_prefixof(); /* Initialize the first 256 entries in the table. */
-
+
for (code = 255 ; code >= 0 ; --code) {
tab_suffixof(code) = (char_type)code;
}
REG1 int i;
int e;
int o;
-
+
resetbuf:
e = insize-(o = (posbits>>3));
-
+
for (i = 0 ; i < e ; ++i) {
inbuf[i] = inbuf[i+o];
}
insize = e;
posbits = 0;
-
+
if (insize < INBUF_EXTRA) {
- if ((rsize = read(in, (char*)inbuf+insize, INBUFSIZ)) == -1) {
+ rsize = read_buffer (in, (char *) inbuf + insize, INBUFSIZ);
+ if (rsize == -1) {
read_error();
}
insize += rsize;
bytes_in += (off_t)rsize;
}
- inbits = ((rsize != 0) ? ((long)insize - insize%n_bits)<<3 :
+ inbits = ((rsize != 0) ? ((long)insize - insize%n_bits)<<3 :
((long)insize<<3)-(n_bits-1));
-
+
while (inbits > posbits) {
if (free_ent > maxcode) {
posbits = ((posbits-1) +
Tracev((stderr, "%d ", code));
if (oldcode == -1) {
- if (code >= 256) error("corrupt input.");
+ if (256 <= code)
+ gzip_error ("corrupt input.");
outbuf[outpos++] = (char_type)(finchar = (int)(oldcode=code));
continue;
}
}
incode = code;
stackp = de_stack;
-
+
if (code >= free_ent) { /* Special case for KwKwK string. */
if (code > free_ent) {
-#ifdef DEBUG
+#ifdef DEBUG
char_type *p;
posbits -= n_bits;
write_buf(out, (char*)outbuf, outpos);
bytes_out += (off_t)outpos;
}
- error(to_stdout ? "corrupt input." :
- "corrupt input. Use zcat to recover some data.");
+ gzip_error (to_stdout
+ ? "corrupt input."
+ : "corrupt input. Use zcat to recover some data.");
}
*--stackp = (char_type)finchar;
code = oldcode;
code = tab_prefixof(code);
}
*--stackp = (char_type)(finchar = tab_suffixof(code));
-
+
/* And put them out in forward order */
{
REG1 int i;
-
+
if (outpos+(i = (de_stack-stackp)) >= OUTBUFSIZ) {
do {
if (i > OUTBUFSIZ-outpos) i = OUTBUFSIZ-outpos;
tab_prefixof(code) = (unsigned short)oldcode;
tab_suffixof(code) = (char_type)finchar;
free_ent = code+1;
- }
+ }
oldcode = incode; /* Remember previous code. */
}
} while (rsize != 0);
-
+
if (!test && outpos > 0) {
write_buf(out, (char*)outbuf, outpos);
bytes_out += (off_t)outpos;
/* unpack.c -- decompress files in pack format.
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1997, 1999, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
#ifdef RCSID
-static char rcsid[] = "$Id: unpack.c,v 1.4 1993/06/11 19:25:36 jloup Exp $";
+static char rcsid[] = "$Id: unpack.c,v 1.4 2006/11/20 08:40:34 eggert Exp $";
#endif
#include <config.h>
int len; /* bit length */
int base; /* base offset for a sequence of leaves */
int n;
- int max_leaves;
+ int max_leaves = 1;
/* Read the original input size, MSB first */
orig_len = 0;
max_len = (int)get_byte(); /* maximum bit length of Huffman codes */
if (max_len > MAX_BITLEN) {
- error("invalid compressed data -- Huffman code > 32 bits");
+ gzip_error ("invalid compressed data -- Huffman code > 32 bits");
}
/* Get the number of leaves at each bit length */
n = 0;
- max_leaves = 1;
for (len = 1; len <= max_len; len++) {
leaves[len] = (int)get_byte();
- if (leaves[len] > max_leaves - (len == max_len))
- error("too many leaves in Huffman tree");
+ if (max_leaves - (len == max_len) < leaves[len])
+ gzip_error ("too many leaves in Huffman tree");
max_leaves = (max_leaves - leaves[len] + 1) * 2 - 1;
n += leaves[len];
}
- if (n >= LITERALS) {
- error("too many leaves in Huffman tree");
+ if (LITERALS <= n) {
+ gzip_error ("too many leaves in Huffman tree");
}
Trace((stderr, "orig_len %lu, max_len %d, leaves %d\n",
orig_len, max_len, n));
flush_window();
if (orig_len != (ulg)(bytes_out & 0xffffffff)) {
- error("invalid compressed data--length error");
+ gzip_error ("invalid compressed data--length error");
}
return OK;
}
/* unzip.c -- decompress files in gzip or pkzip format.
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- *
+
+ Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
+
+/*
* The code in this file is derived from the file funzip.c written
* and put in the public domain by Mark Adler.
*/
*/
#ifdef RCSID
-static char rcsid[] = "$Id: unzip.c,v 0.13 1993/06/10 13:29:00 jloup Exp $";
+static char rcsid[] = "$Id: unzip.c,v 1.4 2006/11/20 08:40:34 eggert Exp $";
#endif
#include <config.h>
if (inptr > insize || LG(h) != LOCSIG) {
fprintf(stderr, "\n%s: %s: not a valid zip file\n",
- progname, ifname);
+ program_name, ifname);
exit_code = ERROR;
return ERROR;
}
if (method != STORED && method != DEFLATED) {
fprintf(stderr,
"\n%s: %s: first entry not deflated or stored -- use unzip\n",
- progname, ifname);
+ program_name, ifname);
exit_code = ERROR;
return ERROR;
}
/* If entry encrypted, decrypt and validate encryption header */
if ((decrypt = h[LOCFLG] & CRPFLG) != 0) {
fprintf(stderr, "\n%s: %s: encrypted file -- use unzip\n",
- progname, ifname);
+ program_name, ifname);
exit_code = ERROR;
return ERROR;
}
int res = inflate();
if (res == 3) {
- error("out of memory");
+ xalloc_die ();
} else if (res != 0) {
- error("invalid compressed data--format violated");
+ gzip_error ("invalid compressed data--format violated");
}
} else if (pkzip && method == STORED) {
if (n != LG(inbuf + LOCSIZ) - (decrypt ? RAND_HEAD_LEN : 0)) {
fprintf(stderr, "len %ld, siz %ld\n", n, LG(inbuf + LOCSIZ));
- error("invalid compressed data--length mismatch");
+ gzip_error ("invalid compressed data--length mismatch");
}
while (n--) {
uch c = (uch)get_byte();
}
flush_window();
} else {
- error("internal error, invalid method");
+ gzip_error ("internal error, invalid method");
}
/* Get the crc and original length */
/* Validate decompression */
if (orig_crc != updcrc(outbuf, 0)) {
fprintf(stderr, "\n%s: %s: invalid compressed data--crc error\n",
- progname, ifname);
+ program_name, ifname);
err = ERROR;
}
if (orig_len != (ulg)(bytes_out & 0xffffffff)) {
fprintf(stderr, "\n%s: %s: invalid compressed data--length error\n",
- progname, ifname);
+ program_name, ifname);
err = ERROR;
}
if (to_stdout) {
WARN((stderr,
"%s: %s has more than one entry--rest ignored\n",
- progname, ifname));
+ program_name, ifname));
} else {
/* Don't destroy the input zip file */
fprintf(stderr,
"%s: %s has more than one entry -- unchanged\n",
- progname, ifname);
+ program_name, ifname);
err = ERROR;
}
}
/* util.c -- utility functions for gzip support
- * Copyright (C) 1997, 1998, 1999, 2001 Free Software Foundation, Inc.
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1997, 1998, 1999, 2001, 2002, 2006 Free Software
+ Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
#ifdef RCSID
-static char rcsid[] = "$Id: util.c,v 0.15 1993/06/15 09:04:13 jloup Exp $";
+static char rcsid[] = "$Id: util.c,v 1.6 2006/12/11 18:54:39 eggert Exp $";
#endif
#include <config.h>
#include "gzip.h"
#include "crypt.h"
+#include <xalloc.h>
#ifndef CHAR_BIT
# define CHAR_BIT 8
#endif
+static int write_buffer OF((int, voidp, unsigned int));
+
extern ulg crc_32_tab[]; /* crc table, defined below */
/* ===========================================================================
while (insize != 0 && (int)insize != -1) {
write_buf(out, (char*)inbuf, insize);
bytes_out += insize;
- insize = read(in, (char*)inbuf, INBUFSIZ);
+ insize = read_buffer (in, (char *) inbuf, INBUFSIZ);
}
if ((int)insize == -1) {
read_error();
/* Read as much as possible */
insize = 0;
do {
- len = read(ifd, (char*)inbuf+insize, INBUFSIZ-insize);
+ len = read_buffer (ifd, (char *) inbuf + insize, INBUFSIZ - insize);
if (len == 0) break;
if (len == -1) {
read_error();
return inbuf[0];
}
+/* Like the standard read function, except do not attempt to read more
+ than SSIZE_MAX bytes at a time. */
+int
+read_buffer (fd, buf, cnt)
+ int fd;
+ voidp buf;
+ unsigned int cnt;
+{
+#ifdef SSIZE_MAX
+ if (SSIZE_MAX < cnt)
+ cnt = SSIZE_MAX;
+#endif
+ return read (fd, buf, cnt);
+}
+
+/* Likewise for 'write'. */
+static int
+write_buffer (fd, buf, cnt)
+ int fd;
+ voidp buf;
+ unsigned int cnt;
+{
+#ifdef SSIZE_MAX
+ if (SSIZE_MAX < cnt)
+ cnt = SSIZE_MAX;
+#endif
+ return write (fd, buf, cnt);
+}
+
/* ===========================================================================
* Write the output buffer outbuf[0..outcnt-1] and update bytes_out.
* (used for the compressed data only)
{
unsigned n;
- while ((n = write(fd, buf, cnt)) != cnt) {
+ while ((n = write_buffer (fd, buf, cnt)) != cnt) {
if (n == (unsigned)(-1)) {
write_error();
}
* any version suffix). For systems with file names that are not
* case sensitive, force the base name to lower case.
*/
-char *base_name(fname)
+char *
+gzip_base_name (fname)
char *fname;
{
char *p;
/* ========================================================================
* Add an environment variable (if any) before argv, and update argc.
- * Return the expanded environment variable to be freed later, or NULL
+ * Return the expanded environment variable to be freed later, or NULL
* if no options were added to argv.
*/
#define SEPARATOR " \t" /* separators in env variable */
env = (char*)getenv(env);
if (env == NULL) return NULL;
- p = (char*)xmalloc(strlen(env)+1);
- env = strcpy(p, env); /* keep env variable intact */
+ env = xstrdup (env);
for (p = env; *p; nargc++ ) { /* move through env */
p += strspn(p, SEPARATOR); /* skip leading separators */
/* Allocate the new argv array, with an extra element just in case
* the original arg list did not end with a NULL.
*/
- nargv = (char**)calloc(*argcp+1, sizeof(char *));
- if (nargv == NULL) error("out of memory");
+ nargv = (char **) xcalloc (*argcp + 1, sizeof (char *));
oargv = *argvp;
*argvp = nargv;
/* Copy the program name first */
- if (oargc-- < 0) error("argc<=0");
+ if (oargc-- < 0)
+ gzip_error ("argc<=0");
*(nargv++) = *(oargv++);
/* Then copy the environment args */
/* ========================================================================
* Error handlers.
*/
-void error(m)
+void
+gzip_error (m)
char *m;
{
- fprintf(stderr, "\n%s: %s: %s\n", progname, ifname, m);
+ fprintf (stderr, "\n%s: %s: %s\n", program_name, ifname, m);
abort_gzip();
}
+void
+xalloc_die ()
+{
+ fprintf (stderr, "\n%s: memory_exhausted\n", program_name);
+ abort_gzip ();
+}
+
void warning (m)
char *m;
{
- WARN ((stderr, "%s: %s: warning: %s\n", progname, ifname, m));
+ WARN ((stderr, "%s: %s: warning: %s\n", program_name, ifname, m));
}
void read_error()
{
int e = errno;
- fprintf(stderr, "\n%s: ", progname);
+ fprintf (stderr, "\n%s: ", program_name);
if (e != 0) {
errno = e;
perror(ifname);
void write_error()
{
int e = errno;
- fprintf(stderr, "\n%s: ", progname);
+ fprintf (stderr, "\n%s: ", program_name);
errno = e;
perror(ofname);
abort_gzip();
putc (*p, file);
}
-/* ========================================================================
- * Semi-safe malloc -- never returns NULL.
- */
-voidp xmalloc (size)
- unsigned size;
-{
- voidp cp = (voidp)malloc (size);
-
- if (cp == NULL) error("out of memory");
- return cp;
-}
-
/* ========================================================================
* Table of CRC-32's of all single-byte values (made by makecrc.c)
*/
+++ /dev/null
-@set UPDATED 29 September 2002
-@set UPDATED-MONTH September 2002
-@set EDITION 1.3.5
-@set VERSION 1.3.5
ten to a terminal. If the input data is not in a format
recognized by gzip, and if the option --stdout is also
given, copy the input data without change to the stan-
- dard ouput: let zcat behave as cat. If -f is not given,
+ dard output: let zcat behave as cat. If -f is not given,
and when not running in the background, gzip prompts to
verify whether an existing file should be overwritten.
+++ /dev/null
-/* yesno.c -- read a yes/no response from stdin
- Copyright (C) 1990, 1998 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <ctype.h>
-#if HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-#include <stdio.h>
-
-/* Read one line from standard input
- and return nonzero if that line begins with y or Y,
- otherwise return 0. */
-
-int rpmatch ();
-
-int
-yesno ()
-{
- /* We make some assumptions here:
- a) leading white space in the response are not vital
- b) the first 128 characters of the answer are enough (the rest can
- be ignored)
- I cannot think for a situation where this is not ok. --drepper@gnu */
- char buf[128];
- int len = 0;
- int c;
-
- while ((c = getchar ()) != EOF && c != '\n')
- if ((len > 0 && len < 127) || (len == 0 && !isspace (c)))
- buf[len++] = c;
- buf[len] = '\0';
-
- return rpmatch (buf) == 1;
-}
-:
#!/bin/sh
# sh is buggy on RS/6000 AIX 3.2. Replace above line with #!/bin/ksh
# or diff is preserved.
PATH="BINDIR:$PATH"; export PATH
-prog=`echo $0 | sed 's|.*/||'`
-case "$prog" in
- *cmp) comp=${CMP-cmp} ;;
- *) comp=${DIFF-diff} ;;
+case "$0" in
+ *cmp) prog=cmp ; comp=${CMP-cmp} ;;
+ *) prog=diff; comp=${DIFF-diff} ;;
esac
+version="z$prog (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Jean-loup Gailly."
+
+usage="Usage: z$prog [OPTION]... FILE1 [FILE2]
+Compare FILE1 to FILE2, using their uncompressed contents if they are
+compressed. If FILE2 is omitted, compare FILE1 to the uncompressed
+contents of FILE1.gz. Do comparisons like '$prog' does.
+
+OPTIONs are the same as for '$prog'.
+
+Report bugs to <bug-gzip@gnu.org>."
+
OPTIONS=
FILES=
-for ARG
-do
- case "$ARG" in
- -*) OPTIONS="$OPTIONS $ARG";;
- *) if test -f "$ARG"; then
- FILES="$FILES $ARG"
- else
- echo "${prog}: $ARG not found or not a regular file"
- exit 2
- fi ;;
- esac
+while :; do
+ case $1 in
+ --h*) echo "$usage" || exit 2; exit;;
+ --v*) echo "$version" || exit 2; exit;;
+ --) shift; break;;
+ -*) OPTIONS="$OPTIONS $ARG"; shift;;
+ esac
+done
+for file; do
+ test -f "$file" || {
+ echo "$prog: $file not found or not a regular file"
+ exit 2
+ }
done
-if test -z "$FILES"; then
- echo "Usage: $prog [${comp}_options] file [file]"
- exit 2
-fi
-set $FILES
if test $# -eq 1; then
FILE=`echo "$1" | sed 's/[-.][zZtga]*$//'`
- gzip -cd "$1" | $comp $OPTIONS - "$FILE"
+ gzip -cd -- "$1" | $comp $OPTIONS - "$FILE"
elif test $# -eq 2; then
case "$1" in
F=`echo "$2" | sed 's|.*/||;s|[-.][zZtga]*||'`
set -C
trap 'rm -f /tmp/"$F".$$; exit 2' HUP INT PIPE TERM 0
- gzip -cdfq "$2" > /tmp/"$F".$$ || exit
- gzip -cdfq "$1" | $comp $OPTIONS - /tmp/"$F".$$
+ gzip -cdfq -- "$2" > /tmp/"$F".$$ || exit
+ gzip -cdfq -- "$1" | $comp $OPTIONS - /tmp/"$F".$$
STAT="$?"
/bin/rm -f /tmp/"$F".$$ || STAT=2
trap - HUP INT PIPE TERM 0
exit $STAT;;
- *) gzip -cdfq "$1" | $comp $OPTIONS - "$2";;
+ *) gzip -cdfq -- "$1" | $comp $OPTIONS - "$2";;
esac;;
*) case "$2" in
*[-.]gz* | *[-.][zZ] | *.t[ga]z)
- gzip -cdfq "$2" | $comp $OPTIONS "$1" -;;
+ gzip -cdfq -- "$2" | $comp $OPTIONS "$1" -;;
*) $comp $OPTIONS "$1" "$2";;
esac;;
esac
else
- echo "Usage: $prog [${comp}_options] file [file]"
+ echo "$usage"
exit 2
fi
-:
#!/bin/sh
# zforce: force a gz extension on all gzip files so that gzip will not
# compress them twice.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
PATH="BINDIR:$PATH"; export PATH
-x=`basename $0`
+
+version="zforce (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Jean-loup Gailly."
+
+usage="Usage: zforce [FILE]...
+Force a .gz extension on all compressed FILEs so that gzip will
+not compress them twice.
+
+Report bugs to <bug-gzip@gnu.org>."
+
if test $# = 0; then
- echo "force a '.gz' extension on all gzip files"
- echo usage: $x files...
+ echo "$usage"
exit 1
fi
res=0
for i do
+ case "$i" in
+ --h*) exec echo "$usage";;
+ --v*) exec echo "$version";;
+ *[-.]z | *[-.]gz | *.t[ag]z) continue;;
+ esac
+
if test ! -f "$i" ; then
- echo ${x}: $i not a file
+ echo zforce: $i not a file
res=1
continue
fi
- case "$i" in
- *[-.]z | *[-.]gz | *.t[ag]z) continue;;
- esac
-
if gzip -lv < "$i" 2>/dev/null | grep '^defl' > /dev/null; then
new="$i.gz"
-:
#!/bin/sh
# zgrep -- a wrapper around a grep program that decompresses files as needed
# Adapted from a version sent by Charles Levert <charles@comm.polymtl.ca>
-# Copyright (C) 1998, 2001, 2002 Free Software Foundation
+# Copyright (C) 1998, 2001, 2002, 2006 Free Software Foundation
# Copyright (C) 1993 Jean-loup Gailly
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
PATH="BINDIR:$PATH"; export PATH
*) grep=${GREP-grep} ;;
esac
+version="z$grep (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Jean-loup Gailly."
+
+usage="Usage: z$grep [OPTION]... [-e] PATTERN [FILE]...
+Look for instances of PATTERN in the input FILEs, using their
+uncompressed contents if they are compressed.
+
+OPTIONs are the same as for '$grep'.
+
+Report bugs to <bug-gzip@gnu.org>."
+
pat=""
after_dash_dash=""
files_with_matches=0
while test $# -ne 0; do
case "$after_dash_dash$1" in
--d* | --rec*) echo >&2 "$0: $1: option not supported"; exit 2;;
+ --h*) echo "$usage" || exit 2; exit;;
--files-with-*) files_with_matches=1;;
--files-witho*) files_without_matches=1;;
--no-f*) no_filename=1;;
+ --v*) echo "$version" || exit 2; exit;;
--wi*) with_filename=1;;
--*) ;;
-*)
done
if test -z "$pat"; then
- echo "grep through gzip files"
- echo "usage: $prog [grep_options] pattern [files]"
+ echo "$usage"
exit 2
fi
for i do
gzip -cdfq -- "$i" |
if test $files_with_matches -eq 1; then
- $grep $opt "$pat" > /dev/null && printf "%s\n" "$i"
+ $grep $opt "$pat" > /dev/null && printf '%s\n' "$i"
elif test $files_without_matches -eq 1; then
- $grep $opt "$pat" > /dev/null || printf "%s\n" "$i"
+ $grep $opt "$pat" > /dev/null || printf '%s\n' "$i"
elif test $with_filename -eq 0 && { test $# -eq 1 || test $no_filename -eq 1; }; then
$grep $opt "$pat"
else
- i=$(echo "$i" | sed -e 's/[\\|&]/\\&/g')
+ escaped=
+ while :; do
+ case $i in
+ *'
+'*)
+ char='
+' repl='\\n';;
+ *'&'*) char='&' repl='\&';;
+ *'\'*) char='\\' repl='\\';;
+ *'|'*) char='|' repl='\|';;
+ *) break;;
+ esac
+ up_to_first_char="\\([^$char]*\\)"
+ after_first_char="[^$char]*$char\\(.*\\)"
+ escaped=$escaped`expr "X$i" : "X$up_to_first_char"`$repl
+ i=`expr "X$i" : "$after_first_char"`
+ done
if test $with_filename -eq 1; then
- sed_script="s|^[^:]*:|${i}:|"
+ sed_script="s|[^:]*|$escaped$i|"
else
- sed_script="s|^|${i}:|"
+ sed_script="s|^|$escaped$i:|"
fi
- # Hack adapted from GPLed code at
- # http://home.comcast.net/~j.p.h/cus-faq-2
- # Has the same effect as the following two lines of bash:
- #
- # $grep $opt "$pat" | sed "$sed_script"
- # exit ${PIPESTATUS[0]}
- #
- # Inside the `...`, fd4 goes to the pipe whose other end is read
- # and passed to eval; fd1 is the normal standard output
- # preserved the line before with exec 3>&1
+
+ # Fail if either grep or sed fails.
+ # Bash has ${PIPESTATUS[0]}, but that's not portable.
exec 3>&1
- eval `
- exec 4>&1 >&3 3>&-
- {
- $grep $opt "$pat" 4>&-; echo "r=$?;" >&4
- } | sed "$sed_script"
- `
+ r=`
+ exec 4>&1
+ ($grep $opt "$pat" 4>&-; echo $? >&4) 3>&- | sed "$sed_script" >&3 4>&-
+ ` &&
exit $r
fi
r=$?
/* zip.c -- compress files to the gzip or pkzip format
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
+
+ Copyright (C) 1997, 1998, 1999, 2006 Free Software Foundation, Inc.
+ Copyright (C) 1992-1993 Jean-loup Gailly
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software Foundation,
+ Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
#ifdef RCSID
-static char rcsid[] = "$Id: zip.c,v 0.17 1993/06/10 13:29:25 jloup Exp $";
+static char rcsid[] = "$Id: zip.c,v 1.6 2006/12/11 18:54:39 eggert Exp $";
#endif
#include <config.h>
#include "gzip.h"
#include "crypt.h"
+#include "timespec.h"
+
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
uch flags = 0; /* general purpose bit flags */
ush attr = 0; /* ascii/binary flag */
ush deflate_flags = 0; /* pkzip -es, -en or -ex equivalent */
+ ulg stamp;
ifd = in;
ofd = out;
flags |= ORIG_NAME;
}
put_byte(flags); /* general flags */
- put_long(time_stamp == (time_stamp & 0xffffffff)
- ? (ulg)time_stamp : (ulg)0);
+ stamp = (0 <= time_stamp.tv_sec && time_stamp.tv_sec <= 0xffffffff
+ ? (ulg) time_stamp.tv_sec
+ : (ulg) 0);
+ put_long (stamp);
/* Write deflated file to zip file */
crc = updcrc(0, 0);
put_byte(OS_CODE); /* OS identifier */
if (save_orig_name) {
- char *p = base_name(ifname); /* Don't save the directory part. */
+ char *p = gzip_base_name (ifname); /* Don't save the directory part. */
do {
put_char(*p);
} while (*p++);
*/
if (ifile_size != -1L && bytes_in != ifile_size) {
fprintf(stderr, "%s: %s: file size changed while zipping\n",
- progname, ifname);
+ program_name, ifname);
}
#endif
Assert(insize == 0, "inbuf not empty");
- len = read(ifd, buf, size);
+ len = read_buffer (ifd, buf, size);
if (len == 0) return (int)len;
if (len == (unsigned)-1) {
read_error();
.I Zless
is a filter which allows examination of compressed or plain text files
one screenful at a time on a soft-copy terminal. It is the equivalent of
-setting the environment variable LESSOPEN to "|gzip -cdfq %s",
+setting the environment variable LESSOPEN to "|gzip -cdfq -- %s",
and then running
.IR less .
However, enough people seem to think that having the
-command
+command
.I zless
available is important to be worth providing it.
then do the uncompress explicitly and pipe to less instead of zless.
.SH "SEE ALSO"
zmore(1), less(1)
+.SH "BUGS"
+.I Zless
+does not work with compressed data that is piped to it via standard
+input; it requires that input files be specified as arguments.
+.SH "COPYRIGHT NOTICE"
+Copyright \(co 2006 Free Software Foundation, Inc.
+.br
+Copyright \(co 1992, 1993 Jean-loup Gailly
+.PP
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+.ig
+Permission is granted to process this file through troff and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+..
+.PP
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the entire
+resulting derived work is distributed under the terms of a permission
+notice identical to this one.
+.PP
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions,
+except that this permission notice may be stated in a translation approved
+by the Foundation.
-:
#!/bin/sh
+
+# Copyright (C) 1998, 2002, 2006 Free Software Foundation
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
PATH="BINDIR:$PATH"; export PATH
-LESSOPEN="|gzip -cdfq %s"; export LESSOPEN
+
+version="zless (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Paul Eggert."
+
+usage="Usage: zless [OPTION]... [FILE]...
+Like 'less', but operate on the uncompressed contents of any compressed FILEs.
+
+Options are the same as for 'less'.
+
+Report bugs to <bug-gzip@gnu.org>."
+
+case $1 in
+--help) exec echo "$usage";;
+--version) exec echo "$version";;
+esac
+
+LESSOPEN="|gzip -cdfq -- %s"; export LESSOPEN
exec less "$@"
-:
#!/bin/sh
# Copyright (C) 2001, 2002 Free Software Foundation
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
PATH="BINDIR:$PATH"; export PATH
+
+version="zmore (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Jean-loup Gailly."
+
+usage="Usage: zmore [OPTION]... [FILE]...
+Like 'more', but operate on the uncompressed contents of any compressed FILEs.
+
+Report bugs to <bug-gzip@gnu.org>."
+
if test "`echo -n a`" = "-n a"; then
# looks like a SysV system:
n1=''; n2='\c'
cb='min 1 -icanon'; ncb='icanon eof ^d'
fi
if test $? -eq 0 && test -n "$oldtty"; then
- trap 'stty $oldtty 2>/dev/null; exit' INT QUIT TRAP USR1 PIPE TERM
+ trap 'stty $oldtty 2>/dev/null; exit' 0 2 3 5 10 13 15
else
- trap 'stty $ncb echo 2>/dev/null; exit' INT QUIT TRAP USR1 PIPE TERM
+ trap 'stty $ncb echo 2>/dev/null; exit' 0 2 3 5 10 13 15
fi
if test $# = 0; then
if test -t 0; then
- echo usage: ${ZMORE_PROGRAM_NAME-zmore} files...
+ echo "$usage"
else
gzip -cdfq | eval more
fi
FIRST=1
for FILE
do
+ case $FILE in
+ --h*) exec echo "$usage";;
+ --v*) exec echo "$version";;
+ esac
+
< "$FILE" || continue
if test $FIRST -eq 0; then
echo $n1 "--More--(Next file: $FILE)$n2"
stty $cb -echo 2>/dev/null
- ANS=`dd bs=1 count=1 2>/dev/null`
+ ANS=`dd bs=1 count=1 2>/dev/null`
stty $ncb echo 2>/dev/null
echo " "
case "$ANS" in
fi
if test "$ANS" != 's'; then
echo "------> $FILE <------"
- gzip -cdfq "$FILE" | more
+ gzip -cdfq -- "$FILE" | more
fi
if test -t 1; then
FIRST=0
-:
#!/bin/sh
+# Copyright (C) 1998, 2002, 2004 Free Software Foundation
+# Copyright (C) 1993 Jean-loup Gailly
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
PATH="BINDIR:$PATH"; export PATH
+
+version="znew (gzip) @VERSION@
+Copyright (C) 2006 Free Software Foundation, Inc.
+This is free software. You may redistribute copies of it under the terms of
+the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
+There is NO WARRANTY, to the extent permitted by law.
+
+Written by Jean-loup Gailly."
+
+usage="Usage: znew [OPTION]... [FILE]...
+Recompress files from .Z (compress) format to .gz (gzip) format.
+
+Options:
+
+ -f Force recompression even if a .gz file already exists.
+ -t Test the new files before deleting originals.
+ -v Verbose; display name and statistics for each file compressed.
+ -9 Use the slowest compression method (optimal compression).
+ -P Use pipes for the conversion to reduce disk space usage.
+ -K Keep a .Z file when it is smaller than the .gz file.
+ --help display this help and exit
+ --version output version information and exit
+
+Report bugs to <bug-gzip@gnu.org>."
+
check=0
pipe=0
opt=
warn="(does not preserve modes and timestamp)"
tmp=/tmp/zfoo.$$
set -C
-echo hi > $tmp.1 || exit 1
-echo hi > $tmp.2 || exit 1
-if test -z "`(${CPMOD-cpmod} $tmp.1 $tmp.2) 2>&1`"; then
+echo hi > $tmp || exit
+if test -z "`(${CPMOD-cpmod} $tmp $tmp) 2>&1`"; then
cpmod=${CPMOD-cpmod}
warn=""
fi
-if test -z "$cpmod" && ${TOUCH-touch} -r $tmp.1 $tmp.2 2>/dev/null; then
+if test -z "$cpmod" && ${TOUCH-touch} -r $tmp $tmp 2>/dev/null; then
cpmod="${TOUCH-touch}"
cpmodarg="-r"
warn="(does not preserve file modes)"
fi
# check if GZIP env. variable uses -S or --suffix
-gzip -q $tmp.1
-ext=`echo $tmp.1* | sed "s|$tmp.1||"`
-rm -f $tmp.[12]*
+gzip -q $tmp
+ext=`echo $tmp* | sed "s|$tmp||"`
+rm -f $tmp*
if test -z "$ext"; then
echo znew: error determining gzip extension
exit 1
for arg
do
case "$arg" in
+ --help) exec echo "$usage";;
+ --version) exec echo "$version";;
-*) opt="$opt $arg"; shift;;
*) break;;
esac
done
if test $# -eq 0; then
- echo "recompress .Z files into $ext (gzip) files"
- echo usage: `echo $0 | sed 's,^.*/,,'` "[-tv9KP]" file.Z...
- echo " -t tests the new files before deleting originals"
- echo " -v be verbose"
- echo " -9 use the slowest compression method (optimal compression)"
- echo " -K keep a .Z file when it is smaller than the $ext file"
- echo " -P use pipes for the conversion $warn"
+ echo "$usage"
exit 1
fi
projects / gzip / commitdiff