-[[!img notmuch-logo.png alt="Notmuch logo" class="left"]]
-#Tips and Tricks for using notmuch with Emacs
+# Tips and Tricks for using notmuch with Emacs
-[[!toc levels=2]]
+One of the more popular notmuch message reading clients is
+**notmuch.el**, an [emacs](http://www.gnu.org/software/emacs/) major
+mode for interacting with notmuch. It is included in the notmuch
+package (notmuch-emacs in Debian). This page goes over some usage
+tips for using notmuch with Emacs.
-The main Notmuch message reading client is **notmuch.el**, which is an
-[emacs](http://www.gnu.org/software/emacs/) major mode, and is
-included in the notmuch package.
+[[!toc levels=2]]
## Setup
+Have a look at the [Howto](http://notmuchmail.org/howto/) for
+prerequisites. Be sure you have done the general setup using the
+notmuch cli command!
+
To use the Notmuch emacs mode, first add the following line to your
`.emacs` rc file:
- (require 'notmuch)
+ (require 'notmuch)
+
+or you can load the package via autoload:
+
+ (autoload 'notmuch "notmuch" "notmuch mail" t)
Then, either run "emacs -f notmuch", or execute the command `M-x
notmuch` from within a running emacs.
## Navigating & reading mails
When first starting notmuch in emacs, you will be presented with the
-notmuch "hello" page. From here you can do searches, see lists of
-recent searches, saved searches, message tags, help information, etc.
+notmuch "hello" page. If it exits with an error after writing
+"Welcome to notmutch. You have" you need to do the basic notmuch setup
+first (see above).
+From here you can do searches, see lists of recent
+searches, saved searches, message tags, help information, etc.
Executing a search will open a new buffer in `notmuch-search-mode`
displaying the search results. Each line in the search results
If you would like to use address autocompletion when composing
messages, see [address completion](#address_completion).
-When you are ready to send a message, type `C-c C-c`. By default
+When you are ready to send a message, type `C-c C-c`. By default
message mode will use your sendmail command to send mail, so make sure
-that works. One annoying standard configuration of message mode is
+that works. One annoying standard configuration of message mode is
that it will hide the sent mail in your emacs frame stack, but it will
not close it. If you type several mails in an emacs session they will
accumulate and make switching between buffers more annoying. You can
avoid that behavior by adding `(setq message-kill-buffer-on-exit t)`
-in your `.emacs` file which will really close the mail window after
-sending it.
+in your `.emacs` file (or doing `M-x
+customize-variable<RET>message-kill-buffer-on-exit<RET>`) which will
+really close the mail window after sending it.
## Attaching files
Using the `M-x mml-attach-file` command, you can attach any file to be
-send with your mail. By default this command is bound to the menu item
-*Attachments--Attach File* with the key binding `C-c C-a`. The
+sent with your mail. By default this command is bound to the menu item
+*Attachments--Attach File* with the key binding `C-c C-a`. The
variable `mml-dnd-attach-options` (`M-x
-customize-variable<RET>mml-dnd-attach-options`) can be set to allow
-the prompting for various attachment options (such as
+customize-variable<RET>mml-dnd-attach-options<RET>`) can be set to
+allow the prompting for various attachment options (such as
inline/attachment) if you want to do that.
For those who prefer a more graphical interface, you can also simply
mentioned as script arguments. (Note: The script expects that you have
`(server-start)` in your `.emacs` file.)
- #!/bin/sh
- attach_cmds=""
- while [ "$1" ]; do
- fullpath=$(readlink --canonicalize $1)
- attach_cmds="$attach_cmds (mml-attach-file \"$fullpath\")"
- shift
- done
- emacsclient -a '' -c -e "(progn (compose-mail) $attach_cmds)"
+ #!/bin/sh
+ attach_cmds=""
+ while [ "$1" ]; do
+ fullpath=$(readlink --canonicalize "$1")
+ attach_cmds="$attach_cmds (mml-attach-file \"$fullpath\")"
+ shift
+ done
+ emacsclient -a '' -c -e "(progn (compose-mail) $attach_cmds)"
+
+## Issues with Emacs 24
+If notmuch-show-mode behaves badly for you in emacs 24.x try adding one of
+
+ (setq gnus-inhibit-images nil)
+
+or
+
+ (require 'gnus-art)
+
+to your .emacs file.
-----
# Advanced tips and tweaks
+## Use separate emacs lisp file for notmuch configuration
+
+Instead of adding notmuch configuration code to `.emacs`, there
+is an option to collect those to a separate file (which is only
+loaded when `notmuch` is invoked). To do this, write, for example
+a file called `~/.emacs.d/my-notmuch.el`:
+
+ ;;; my-notmuch.el -- my notmuch mail configuration
+ ;;;
+
+ ;;; add here stuff required to be configured *before*
+ ;;; notmuch is loaded;
+
+ ;; uncomment and modify in case some elisp files are not found in load-path
+ ;; (add-to-list 'load-path "~/vc/ext/notmuch/emacs")
+
+ ;;; load notmuch
+ (require 'notmuch)
+
+ ;;; add here stuff required to be configured *after*
+ ;;; notmuch is loaded;
+
+ ;; uncomment & modify if you want to use external smtp server to send mail
+ ;; (setq smtpmail-smtp-server "smtp.server.tld"
+ ;; message-send-mail-function 'message-smtpmail-send-it)
+ ;; uncomment to debug smtp sending problems
+ ;; (setq smtpmail-debug-info t)
+
+Then, add to `.emacs`:
+
+ (autoload 'notmuch "~/.emacs.d/my-notmuch" "notmuch mail" t)
+
+## Initial cursor position in notmuch 0.15 hello window
+
+In notmuch version 0.15 emacs client the handling of cursor position in
+notmuch hello window has been simplified to a version which suits best
+most cases.
+
+Initially the cursor is positioned at the beginning of buffer.
+
+Some users liked the "ancient" version where cursor was moved to the
+first `Saved searches` button.
+
+Add the following code to your notmuch emacs configuration file in
+case you want this behaviour:
+
+ (add-hook 'notmuch-hello-refresh-hook
+ (lambda ()
+ (if (and (eq (point) (point-min))
+ (search-forward "Saved searches:" nil t))
+ (progn
+ (forward-line)
+ (widget-forward 1))
+ (if (eq (widget-type (widget-at)) 'editable-field)
+ (beginning-of-line)))))
+
## Add a key binding to add/remove/toggle a tag
The `notmuch-{search,show}-{add,remove}-tag` functions are very useful
of how to make a key binding to add the "spam" tag and remove the
"inbox" tag in notmuch-show-mode:
- (define-key notmuch-show-mode-map "S"
- (lambda ()
- "mark message as spam"
- (interactive)
- (notmuch-show-add-tag "spam")
- (notmuch-show-remove-tag "inbox")))
+In notmuch versions up to 0.11.x
+
+ (define-key notmuch-show-mode-map "S"
+ (lambda ()
+ "mark message as spam"
+ (interactive)
+ (notmuch-show-add-tag "spam")
+ (notmuch-show-remove-tag "inbox")))
+
+Starting from notmuch 0.12 the functions `notmuch-show-add-tag` and
+`notmuch-show-remove-tag` have changed to be more versatile and lost
+noninteractive use. When upgrading to 0.12 the above needs to be
+changed to this:
+
+ (define-key notmuch-show-mode-map "S"
+ (lambda ()
+ "mark message as spam"
+ (interactive)
+ (notmuch-show-tag-message "+spam" "-inbox")))
You can do the same for threads in `notmuch-search-mode` by just
replacing "show" with "search" in the called functions.
+Starting from notmuch 0.12 use `notmuch-search-tag-thread` instead:
+
+ (define-key notmuch-search-mode-map "S"
+ (lambda ()
+ "mark messages in thread as spam"
+ (interactive)
+ (notmuch-show-tag-thread "+spam" "-inbox")))
+
+Starting from notmuch 0.13 use `notmuch-search-tag` -- it has a little
+different usage syntax:
+
+ (define-key notmuch-search-mode-map "S"
+ (lambda ()
+ "mark messages in thread as spam"
+ (interactive)
+ (notmuch-search-tag '("+spam" "-inbox"))))
+
The definition above makes use of a lambda function, but you could
also define a separate function first:
- (defun notmuch-show-tag-spam()
- "mark message as spam"
- (interactive)
- (notmuch-show-add-tag "spam")
- (notmuch-show-remove-tag "inbox")))
- (define-key notmuch-show-mode-map "S" 'notmuch-show-tag-spam)
+ (defun notmuch-show-tag-spam ()
+ "mark message as spam"
+ (interactive)
+ (notmuch-show-add-tag "spam")
+ (notmuch-show-remove-tag "inbox")))
+ (define-key notmuch-show-mode-map "S" 'notmuch-show-tag-spam)
+
+(See above for analogy how to apply this for notmuch 0.12 and later)
Here's a more complicated example of how to add a toggle "deleted"
key:
- (define-key notmuch-show-mode-map "d"
- (lambda ()
- "toggle deleted tag for message"
- (interactive)
- (if (member "deleted" (notmuch-show-get-tags))
- (notmuch-show-remove-tag "deleted")
- (notmuch-show-add-tag "deleted"))))
+ (define-key notmuch-show-mode-map "d"
+ (lambda ()
+ "toggle deleted tag for message"
+ (interactive)
+ (if (member "deleted" (notmuch-show-get-tags))
+ (notmuch-show-remove-tag "deleted")
+ (notmuch-show-add-tag "deleted"))))
+
+And version for notmuch 0.12
+
+ (define-key notmuch-show-mode-map "d"
+ (lambda ()
+ "toggle deleted tag for message"
+ (interactive)
+ (notmuch-show-tag-message
+ (if (member "deleted" (notmuch-show-get-tags))
+ "-deleted" "+deleted"))))
+
+## Adding many tagging keybindings
+
+If you want to have have many tagging keybindings, you can save the typing
+the few lines of boilerplate for every binding (for versions before 0.12,
+you will need to change notmuch-show-apply-tag-macro).
+
+ (eval-after-load 'notmuch-show
+ '(define-key notmuch-show-mode-map "`" 'notmuch-show-apply-tag-macro))
+
+ (setq notmuch-show-tag-macro-alist
+ (list
+ '("m" "+notmuch::patch" "+notmuch::moreinfo" "-notmuch::needs-review")
+ '("n" "+notmuch::patch" "+notmuch::needs-review" "-notmuch::pushed")
+ '("o" "+notmuch::patch" "+notmuch::obsolete"
+ "-notmuch::needs-review" "-notmuch::moreinfo")
+ '("p" "-notmuch::pushed" "-notmuch::needs-review"
+ "-notmuch::moreinfo" "+pending")
+ '("P" "-pending" "-notmuch::needs-review" "-notmuch::moreinfo" "+notmuch::pushed")
+ '("r" "-notmuch::patch" "+notmuch::review")
+ '("s" "+notmuch::patch" "-notmuch::obsolete" "-notmuch::needs-review" "-notmuch::moreinfo" "+notmuch::stale")
+ '("t" "+notmuch::patch" "-notmuch::needs-review" "+notmuch::trivial")
+ '("w" "+notmuch::patch" "+notmuch::wip" "-notmuch::needs-review")))
+
+ (defun notmuch-show-apply-tag-macro (key)
+ (interactive "k")
+ (let ((macro (assoc key notmuch-show-tag-macro-alist)))
+ (apply 'notmuch-show-tag-message (cdr macro))))
+
+## Restore reply-to-all key binding to 'r'
+
+Starting from notmuch 0.12 the 'r' key is bound to reply-to-sender instead of
+reply-to-all. Here's how to swap the reply to sender/all bindings in show mode:
+
+ (define-key notmuch-show-mode-map "r" 'notmuch-show-reply)
+ (define-key notmuch-show-mode-map "R" 'notmuch-show-reply-sender)
+
+And in search mode:
+
+ (define-key notmuch-search-mode-map "r" 'notmuch-search-reply-to-thread)
+ (define-key notmuch-search-mode-map "R" 'notmuch-search-reply-to-thread-sender)
+
## How to do FCC/BCC...
The Emacs interface to notmuch will automatically add an `Fcc`
header to your outgoing mail so that any messages you send will also
be saved in your mail store. You can control where this copy of the
-message is saved by setting the variables `message-directory` (which
-defines a base directory) and `notmuch-fcc-dirs` which defines the
-subdirectory relative to `message-directory` in which to save the
-mail. Enter a directory (without the maildir `/cur` ending which
-will be appended automatically). To customize both variables at the
-same time, use the fancy command:
+message is saved by setting the variable `notmuch-fcc-dirs` which defines the
+subdirectory relative to the `database.path` setting from your
+notmuch configuration in which to save the mail. Enter a directory
+(without the maildir `/cur` ending which will be appended
+automatically). Additional information can be found as usual using:
- M-x customize-apropos<RET>\(notmuch-fcc-dirs\)\|\(message-directory\)
+ M-x describe-variable notmuch-fcc-dirs
+
+An additional variable that can affect FCC settings in some cases is
+`message-directory`. Emacs message-mode uses this variable for
+postponed messages.
+
+To customize both variables at the same time, use the fancy command:
+
+ M-x customize-apropos<RET>\(notmuch-fcc-dirs\)\|\(message-directory\)
This mechanism also allows you to select different folders to be
used for the outgoing mail depending on your selected `From`
An example setting might be:
- (setq notmuch-saved-searches '(("inbox" . "tag:inbox")
- ("unread" . "tag:inbox AND tag:unread")
- ("notmuch" . "tag:inbox AND to:notmuchmail.org")))
+ (setq notmuch-saved-searches '(("inbox" . "tag:inbox")
+ ("unread" . "tag:inbox AND tag:unread")
+ ("notmuch" . "tag:inbox AND to:notmuchmail.org")))
Of course, you can have any number of saved searches, each configured
with any supported search terms (see "notmuch help search-terms").
browser. Here's a little script that Keith Packard wrote, which he
calls `view-html`:
- #!/bin/sh
- dir=`mktemp -d`
- trap "rm -r $dir" 0
- cat "$@" > "$dir"/msg
- if munpack -C "$dir" -t < "$dir"/msg 2>&1 | grep 'Did not find'; then
- sed -n '/[Hh][Tt][Mm][Ll]/,$p' "$dir"/msg > $dir/part1.html
- rm "$dir"/msg
- fi
- for i in "$dir"/part*; do
- if grep -q -i -e '<html>' -e 'text/html' "$i"; then
- iceweasel "$i" &
- sleep 3
- exit 0
- fi
- done
+ #!/bin/sh
+ dir=`mktemp -d`
+ trap "rm -r $dir" 0
+ cat "$@" > "$dir"/msg
+ if munpack -C "$dir" -t < "$dir"/msg 2>&1 | grep 'Did not find'; then
+ sed -n '/[Hh][Tt][Mm][Ll]/,$p' "$dir"/msg > $dir/part1.html
+ rm "$dir"/msg
+ fi
+ for i in "$dir"/part*; do
+ if grep -q -i -e '<html>' -e 'text/html' "$i"; then
+ iceweasel "$i" &
+ sleep 3
+ exit 0
+ fi
+ done
Save that script somewhere in your `${PATH}`, make it executable,
and change the invocation of `iceweasel` to any other HTML viewer if
## msmtp, message mode and multiple accounts
-As an alternative to running a mail server such as sendmail or
-postfix just to send email, it is possible to use
-[msmtp](http://msmtp.sourceforge.net/). This small application will
+As an alternative to running a mail server such as sendmail or postfix
+just to send email, it is possible to use
+[msmtp](http://msmtp.sourceforge.net/). This small application will
look like `/usr/bin/sendmail` to a MUA such as emacs message mode, but
-will just forward the email to an external SMTP server. It's fairly
-easy to set up and it support several account for using different
-SMTP servers. The msmtp pages have several examples.
+will just forward the email to an external SMTP server. It's fairly
+easy to set up and it supports several accounts for using different
+SMTP servers. The msmtp pages have several examples.
A typical scenario is that you want to use the company SMTP server
for email coming from your company email address, and your personal
for the domains you want to send out using specific SMTP servers and
the rest will go to the default account.
+If you have a hard time getting the above to work for you, as I did,
+it's also possible to add a message-send-mail-hook in your .emacs to
+send the from header explicitly as an argument to msmtp as described
+[here](http://www.emacswiki.org/cgi-bin/wiki/GnusMSMTP#toc2) on the
+emacswiki.
+
+
## <span id="address_completion">Address completion when composing</span>
-There are currently two solutions to this:
+There are currently three solutions to this:
+
+### bbdb
[bbdb](http://bbdb.sourceforge.net) is a contact database for emacs
that works quite nicely together with message mode, including
address autocompletion.
+### notmuch database as an address book
+
You can also use the notmuch database as a mail address book itself.
To do this you need a command line tool that outputs likely address
-candidates based on a search string. There are currently two
+candidates based on a search string. There are currently three
available:
* The python tool `notmuch_address.py` (`git clone
- http://jkr.acm.jhu.edu/git/notmuch_addresses.git`) (slower, but
+ http://commonmeasure.org/~jkr/git/notmuch_addresses.git`) (slower, but
no compilation required so good for testing the setup)
* The vala-based
`http://github.com/spaetz/vala-notmuch/raw/static-sources/src/addrlookup.c`
and build it with:
- cc -o addrlookup addrlookup.c `pkg-config --cflags --libs gobject-2.0` -lnotmuch
+ cc -o addrlookup addrlookup.c `pkg-config --cflags --libs gobject-2.0` -lnotmuch
+
+ * Shell/fgrep/perl combination [nottoomuch-addresses.sh](https://github.com/domo141/nottoomuch/blob/master/nottoomuch-addresses.rst).
+ This tools maintains it's own address "database" gathered from email
+ files notmuch knows and search from that "database" is done by `fgrep(1)`.
+
+You can perform tab-completion using any of these programs.
+Just add the following to your .emacs:
+
+ (require 'notmuch-address)
+ (setq notmuch-address-command "/path/to/address_fetching_program")
+ (notmuch-address-message-insinuate)
-EUDC is integrated into emacs and is needed for tab completion of
-email addresses. See [this
-mail](http://mid.gmane.org/87fx3uflkx.fsf@jhu.edu)
-(id:87fx3uflkx.fsf@jhu.edu) for more information.
+### Google Contacts
+
+[GooBook](http://code.google.com/p/goobook/) is a command-line tool for
+accessing Google Contacts. Install and set it up according to its documentation.
+
+To use GooBook with notmuch, use this wrapper script and set it up like the
+programs above.
+
+ #!/bin/sh
+ goobook query "$*" | sed 's/\(.*\)\t\(.*\)\t.*/\2 \<\1\>/' | sed '/^$/d'
+
+You can add the sender of a message to Google Contacts by piping the message
+(`notmuch-show-pipe-message`) to `goobook add`.
## How to sign/encrypt messages with gpg
-Messages can by signed using gpg by invoking `M-x
-mml-secure-sign-pgpmime` (or `M-x
-mml-secure-encrypt-pgpmime`). These functions are available via the
-standard `message-mode` keybindings `C-c C-m s p` and `C-c C-m c
-p`. To sign outgoing mail by default, use the `message-setup-hook`
-in your `.emacs` file:
+Messages can by signed using gpg by invoking
+`M-x mml-secure-sign-pgpmime` (or `M-x mml-secure-encrypt-pgpmime`).
+These functions are available via the standard `message-mode` keybindings
+`C-c C-m s p` and `C-c C-m c p`. To sign outgoing mail by default, use the
+`message-setup-hook` in your `.emacs` file:
- ;; Sign messages by default.
- (add-hook 'message-setup-hook 'mml-secure-sign-pgpmime)
+ ;; Sign messages by default.
+ (add-hook 'message-setup-hook 'mml-secure-sign-pgpmime)
This inserts the required `<#part sign=pgpmime>` into the beginning
of the mail text body and will be converted into a pgp signature
Alternatively, you may prefer to use `mml-secure-message-sign-pgpmime` instead
of `mml-secure-sign-pgpmime` to sign the whole message instead of just one
part.
+
+### Troubleshooting message-mode gpg support
+
+- If you have trouble with expired subkeys, you may have encountered
+ emacs bug #7931. This is fixed in git commit 301ea744c on
+ 2011-02-02. Note that if you have the Debian package easypg
+ installed, it will shadow the fixed version of easypg included with
+ emacs.
+
+## Multiple identities using gnus-alias
+
+[gnus-alias](http://www.emacswiki.org/emacs/GnusAlias) allows you to
+define multiple identities when using `message-mode`. You can specify
+the from address, organization, extra headers (including *Bcc*), extra
+body text, and signature for each identity. Identities are chosen
+based on a set of rules. When you are in message mode, you can switch
+identities using gnus-alias.
+
+### Installation
+
+- put `gnus-alias.el` on your load Emacs-Lisp load path (add new directory
+ to load path by writing `(add-to-list 'load-path "/some/load/path")` into
+ your `.emacs`.
+
+- Add the following to your `.emacs`
+
+ (autoload 'gnus-alias-determine-identity "gnus-alias" "" t)
+ (add-hook 'message-setup-hook 'gnus-alias-determine-identity)
+
+Looking into `gnus-alias.el` gives a bit more information...
+
+### Example Configuration
+
+Here is an example configuration.
+
+ ;; Define two identities, "home" and "work"
+ (setq gnus-alias-identity-alist
+ '(("home"
+ nil ;; Does not refer to any other identity
+ "John Doe <jdoe@example.net>" ;; Sender address
+ nil ;; No organization header
+ nil ;; No extra headers
+ nil ;; No extra body text
+ "~/.signature")
+ ("work"
+ nil
+ "John Doe <john.doe@example.com>"
+ "Example Corp."
+ (("Bcc" . "john.doe@example.com"))
+ nil
+ "~/.signature.work")))
+ ;; Use "home" identity by default
+ (setq gnus-alias-default-identity "home")
+ ;; Define rules to match work identity
+ (setq gnus-alias-identity-rules
+ '(("work" ("any" "john.doe@\\(example\\.com\\|help\\.example.com\\)" both) "work"))
+ ;; Determine identity when message-mode loads
+ (add-hook 'message-setup-hook 'gnus-alias-determine-identity)
+
+When `gnus-alias` has been loaded (using autoload, require, *M-x load-library*
+or *M-x load-file* (load-file takes file path -- therefore it can be used
+without any `.emacs` changes)) the following commands can be used to get(/set)
+more information (some of these have "extensive documentation"):
+
+ M-x describe-variable RET gnus-alias-identity-alist
+ M-x describe-variable RET gnus-alias-identity-rules
+ M-x describe-variable RET gnus-alias-default-identity
+
+ M-x customize-group RET gnus-alias RET
+ or
+ M-x gnus-alias-customize RET
+
+The last two do the same thing.
+
+See also the **Usage:** section in `gnus-alias.el`.
+
+## Resending (or bouncing) messages
+
+Add the following to your `.emacs` to be able to resend the current message in
+show mode.
+
+ (define-key notmuch-show-mode-map "b"
+ (lambda (&optional address)
+ "Bounce the current message."
+ (interactive "sBounce To: ")
+ (notmuch-show-view-raw-message)
+ (message-resend address)))
+
+## `notmuch-hello` refresh status message
+
+Add the following to your `.emacs` to get a status message about the change in
+the number of messages in the mail store when refreshing the `notmuch-hello`
+buffer.
+
+ (defvar notmuch-hello-refresh-count 0)
+
+ (defun notmuch-hello-refresh-status-message ()
+ (unless no-display
+ (let* ((new-count
+ (string-to-number
+ (car (process-lines notmuch-command "count"))))
+ (diff-count (- new-count notmuch-hello-refresh-count)))
+ (cond
+ ((= notmuch-hello-refresh-count 0)
+ (message "You have %s messages."
+ (notmuch-hello-nice-number new-count)))
+ ((> diff-count 0)
+ (message "You have %s more messages since last refresh."
+ (notmuch-hello-nice-number diff-count)))
+ ((< diff-count 0)
+ (message "You have %s fewer messages since last refresh."
+ (notmuch-hello-nice-number (- diff-count)))))
+ (setq notmuch-hello-refresh-count new-count))))
+
+ (add-hook 'notmuch-hello-refresh-hook 'notmuch-hello-refresh-status-message)
+
+## Replacing tabs with spaces in subject and header
+
+Mailman mailing list software rewrites and rewraps long message subjects in
+a way that causes TABs to appear in the middle of the subject and header
+lines. Add this to your `.emacs` to replace tabs with spaces in subject
+lines:
+
+ (defun notmuch-show-subject-tabs-to-spaces ()
+ "Replace tabs with spaces in subject line."
+ (goto-char (point-min))
+ (when (re-search-forward "^Subject:" nil t)
+ (while (re-search-forward "\t" (line-end-position) t)
+ (replace-match " " nil nil))))
+
+ (add-hook 'notmuch-show-markup-headers-hook 'notmuch-show-subject-tabs-to-spaces)
+
+And in header lines (this will only work with the yet to be released
+notmuch version 0.15):
+
+ (defun notmuch-show-header-tabs-to-spaces ()
+ "Replace tabs with spaces in header line."
+ (setq header-line-format
+ (notmuch-show-strip-re
+ (replace-regexp-in-string "\t" " " (notmuch-show-get-subject)))))
+
+ (add-hook 'notmuch-show-hook 'notmuch-show-header-tabs-to-spaces)
+
+## Hiding unread messages in notmuch-show
+
+I like to have an inbox saved search, but only show unread messages when they
+view a thread. This takes two steps:
+
+1. Apply
+[this patch from Mark Walters](http://notmuchmail.org/pipermail/notmuch/2012/010817.html)
+to add the `notmuch-show-filter-thread` function.
+1. Add the following hook to your emacs configuration:
+
+ (defun expand-only-unread-hook () (interactive)
+ (let ((unread nil)
+ (open (notmuch-show-get-message-ids-for-open-messages)))
+ (notmuch-show-mapc (lambda ()
+ (when (member "unread" (notmuch-show-get-tags))
+ (setq unread t))))
+ (when unread
+ (let ((notmuch-show-hook (remove 'expand-only-unread-hook notmuch-show-hook)))
+ (notmuch-show-filter-thread "tag:unread")))))
+
+ (add-hook 'notmuch-show-hook 'expand-only-unread-hook)
+
+## Changing the color of a saved search based on some other search
+
+I like to have a saved search for my inbox, but have it change color when there
+are thread with unread messages in the inbox. I accomplish this with the
+following code in my emacs config:
+
+ (defun color-inbox-if-unread () (interactive)
+ (save-excursion
+ (goto-char (point-min))
+ (let ((cnt (car (process-lines "notmuch" "count" "tag:inbox and tag:unread"))))
+ (when (> (string-to-number cnt) 0)
+ (save-excursion
+ (when (search-forward "inbox" (point-max) t)
+ (let* ((overlays (overlays-in (match-beginning 0) (match-end 0)))
+ (overlay (car overlays)))
+ (when overlay
+ (overlay-put overlay 'face '((:inherit bold) (:foreground "green")))))))))))
+ (add-hook 'notmuch-hello-refresh-hook 'color-inbox-if-unread)
+
+## Linking to notmuch messages and threads from the Circe IRC client
+
+[Circe](https://github.com/jorgenschaefer/circe/wiki) is an IRC client for emacs.
+To have clickable buttons for notmuch messages and threads, add the following to
+`lui-buttons-list` (using, e.g. M-x customize-variable)
+
+ ("\\(?:id\\|mid\\|thread\\):[0-9A-Za-z][0-9A-Za-z.@-]*" 0 notmuch-show 0)
+
+If you have notmuch-pick installed, it works fine for this as well.
+
+## Linking to notmuch messages from org-mode
+
+Support for linking to notmuch messages is distributed with org-mode,
+but as a contrib file, so you might have to work a bit to load it.
+
+In Debian and derivatives,
+
+ (add-to-list 'load-path "/usr/share/org-mode/lisp")
+
+Then
+
+ (require 'org-notmuch)
+
+In general it is nice to have a key for org-links (not just for notmuch). For example
+
+ (define-key global-map "\C-cl" 'org-store-link)
projects / obsolete / notmuch-wiki / blobdiff