+
+## Multiple identities using gnus-alias
+
+[gnus-alias](http://www.emacswiki.org/emacs/GnusAlias) allows you to
+define multiple identities when using `message-mode`. You can specify
+the from address, organization, extra headers (including *Bcc*), extra
+body text, and signature for each identity. Identities are chosen
+based on a set of rules. When you are in message mode, you can switch
+identities using gnus-alias.
+
+### Installation
+
+- put `gnus-alias.el` on your load Emacs-Lisp load path (add new directory
+ to load path by writing `(add-to-list 'load-path "/some/load/path")` into
+ your `.emacs`.
+
+- Add the following to your `.emacs`
+
+ (autoload 'gnus-alias-determine-identity "gnus-alias" "" t)
+ (add-hook 'message-setup-hook 'gnus-alias-determine-identity)
+
+Looking into `gnus-alias.el` gives a bit more information...
+
+### Example Configuration
+
+Here is an example configuration.
+
+ ;; Define two identities, "home" and "work"
+ (setq gnus-alias-identity-alist
+ '(("home"
+ nil ;; Does not refer to any other identity
+ "John Doe <jdoe@example.net>" ;; Sender address
+ nil ;; No organization header
+ nil ;; No extra headers
+ nil ;; No extra body text
+ "~/.signature")
+ ("work"
+ nil
+ "John Doe <john.doe@example.com>"
+ "Example Corp."
+ (("Bcc" . "john.doe@example.com"))
+ nil
+ "~/.signature.work")))
+ ;; Use "home" identity by default
+ (setq gnus-alias-default-identity "home")
+ ;; Define rules to match work identity
+ (setq gnus-alias-identity-rules
+ '(("work" ("any" "john.doe@\\(example\\.com\\|help\\.example.com\\)" both) "work"))
+ ;; Determine identity when message-mode loads
+ (add-hook 'message-setup-hook 'gnus-alias-determine-identity)
+
+When `gnus-alias` has been loaded (using autoload, require, *M-x load-library*
+or *M-x load-file* (load-file takes file path -- therefore it can be used
+without any `.emacs` changes)) the following commands can be used to get(/set)
+more information (some of these have "extensive documentation"):
+
+ M-x describe-variable RET gnus-alias-identity-alist
+ M-x describe-variable RET gnus-alias-identity-rules
+ M-x describe-variable RET gnus-alias-default-identity
+
+ M-x customize-group RET gnus-alias RET
+ or
+ M-x gnus-alias-customize RET
+
+The last two do the same thing.
+
+See also the **Usage:** section in `gnus-alias.el`.
+
+## Resending (or bouncing) messages
+
+Add the following to your `.emacs` to be able to resend the current message in
+show mode.
+
+ (define-key notmuch-show-mode-map "b"
+ (lambda (&optional address)
+ "Bounce the current message."
+ (interactive "sBounce To: ")
+ (notmuch-show-view-raw-message)
+ (message-resend address)))
+
+## `notmuch-hello` refresh status message
+
+Add the following to your `.emacs` to get a status message about the change in
+the number of messages in the mail store when refreshing the `notmuch-hello`
+buffer.
+
+ (defvar notmuch-hello-refresh-count 0)
+
+ (defun notmuch-hello-refresh-status-message ()
+ (unless no-display
+ (let* ((new-count
+ (string-to-number
+ (car (process-lines notmuch-command "count"))))
+ (diff-count (- new-count notmuch-hello-refresh-count)))
+ (cond
+ ((= notmuch-hello-refresh-count 0)
+ (message "You have %s messages."
+ (notmuch-hello-nice-number new-count)))
+ ((> diff-count 0)
+ (message "You have %s more messages since last refresh."
+ (notmuch-hello-nice-number diff-count)))
+ ((< diff-count 0)
+ (message "You have %s fewer messages since last refresh."
+ (notmuch-hello-nice-number (- diff-count)))))
+ (setq notmuch-hello-refresh-count new-count))))
+
+ (add-hook 'notmuch-hello-refresh-hook 'notmuch-hello-refresh-status-message)
+
+## Replacing tabs with spaces in subject and header
+
+Mailman mailing list software rewrites and rewraps long message subjects in
+a way that causes TABs to appear in the middle of the subject and header
+lines. Add this to your `.emacs` to replace tabs with spaces in subject
+lines:
+
+ (defun notmuch-show-subject-tabs-to-spaces ()
+ "Replace tabs with spaces in subject line."
+ (goto-char (point-min))
+ (when (re-search-forward "^Subject:" nil t)
+ (while (re-search-forward "\t" (line-end-position) t)
+ (replace-match " " nil nil))))
+
+ (add-hook 'notmuch-show-markup-headers-hook 'notmuch-show-subject-tabs-to-spaces)
+
+And in header lines (this will only work with the yet to be released
+notmuch version 0.15):
+
+ (defun notmuch-show-header-tabs-to-spaces ()
+ "Replace tabs with spaces in header line."
+ (setq header-line-format
+ (notmuch-show-strip-re
+ (replace-regexp-in-string "\t" " " (notmuch-show-get-subject)))))
+
+ (add-hook 'notmuch-show-hook 'notmuch-show-header-tabs-to-spaces)
+
+## Hiding unread messages in notmuch-show
+
+I like to have an inbox saved search, but only show unread messages when they
+view a thread. This takes two steps:
+
+1. Apply
+[this patch from Mark Walters](http://notmuchmail.org/pipermail/notmuch/2012/010817.html)
+to add the `notmuch-show-filter-thread` function.
+1. Add the following hook to your emacs configuration:
+
+ (defun expand-only-unread-hook () (interactive)
+ (let ((unread nil)
+ (open (notmuch-show-get-message-ids-for-open-messages)))
+ (notmuch-show-mapc (lambda ()
+ (when (member "unread" (notmuch-show-get-tags))
+ (setq unread t))))
+ (when unread
+ (let ((notmuch-show-hook (remove 'expand-only-unread-hook notmuch-show-hook)))
+ (notmuch-show-filter-thread "tag:unread")))))
+
+ (add-hook 'notmuch-show-hook 'expand-only-unread-hook)
+
+## Changing the color of a saved search based on some other search
+
+I like to have a saved search for my inbox, but have it change color when there
+are thread with unread messages in the inbox. I accomplish this with the
+following code in my emacs config:
+
+ (defun color-inbox-if-unread () (interactive)
+ (save-excursion
+ (goto-char (point-min))
+ (let ((cnt (car (process-lines "notmuch" "count" "tag:inbox and tag:unread"))))
+ (when (> (string-to-number cnt) 0)
+ (save-excursion
+ (when (search-forward "inbox" (point-max) t)
+ (let* ((overlays (overlays-in (match-beginning 0) (match-end 0)))
+ (overlay (car overlays)))
+ (when overlay
+ (overlay-put overlay 'face '((:inherit bold) (:foreground "green")))))))))))
+ (add-hook 'notmuch-hello-refresh-hook 'color-inbox-if-unread)
+
+## Linking to notmuch messages and threads from the Circe IRC client
+
+[Circe](https://github.com/jorgenschaefer/circe/wiki) is an IRC client for emacs.
+To have clickable buttons for notmuch messages and threads, add the following to
+`lui-buttons-list` (using, e.g. M-x customize-variable)
+
+ ("\\(?:id\\|mid\\|thread\\):[0-9A-Za-z][0-9A-Za-z.@-]*" 0 notmuch-show 0)
+
+If you have notmuch-pick installed, it works fine for this as well.
+
+## Linking to notmuch messages from org-mode
+
+Support for linking to notmuch messages is distributed with org-mode,
+but as a contrib file, so you might have to work a bit to load it.
+
+In Debian and derivatives,
+
+ (add-to-list 'load-path "/usr/share/org-mode/lisp")
+
+Then
+
+ (require 'org-notmuch)
+
+In general it is nice to have a key for org-links (not just for notmuch). For example
+
+ (define-key global-map "\C-cl" 'org-store-link)
projects / obsolete / notmuch-wiki / blobdiff