<h1>NOTMUCH-SEARCH-TERMS(7)</h1>
<h2>NAME</h2>
-
<pre>
- notmuch-search-terms - Syntax for notmuch queries
+ notmuch-search-terms - syntax for notmuch queries
</pre>
<h2>SYNOPSIS</h2>
-
<pre>
- <b>notmuch</b> <b>count</b> [<u>options...</u>] <<u>search-term</u>>...
-</pre>
+ <b>notmuch</b> <b>count</b> [<u>options...</u>] <<u>search-term</u>>...
-<pre>
- <b>notmuch</b> <b>dump</b> [ <<u>filename</u>> ] [--] [ <<u>search-term</u>>...]
-</pre>
+ <b>notmuch</b> <b>dump</b> [ <<u>filename</u>> ] [--] [ <<u>search-term</u>>...]
-<pre>
- <b>notmuch</b> <b>search</b> [<u>options</u>...] <<u>search-term</u>>...
-</pre>
+ <b>notmuch</b> <b>search</b> [<u>options</u>...] <<u>search-term</u>>...
-<pre>
- <b>notmuch</b> <b>show</b> [<u>options</u>...] <<u>search-term</u>>...
-</pre>
+ <b>notmuch</b> <b>show</b> [<u>options</u>...] <<u>search-term</u>>...
-<pre>
- <b>notmuch</b> <b>tag</b> +<<u>tag></u>|-<<u>tag</u>> [...] [--] <<u>search-term</u>>...
+ <b>notmuch</b> <b>tag</b> +<<u>tag</u>>|-<<u>tag</u>> [...] [--] <<u>search-term</u>>...
</pre>
<h2>DESCRIPTION</h2>
-
<pre>
Several notmuch commands accept a common syntax for search terms.
-</pre>
-<pre>
The search terms can consist of free-form text (and quoted phrases)
which will match all messages that contain all of the given
terms/phrases in the body, the subject, or any of the sender or recipi-
ent headers.
-</pre>
-<pre>
As a special case, a search string consisting of exactly a single
- asterisk ("*") will match all messages.
-</pre>
+ asterisk ("*") will match all messages.
-<pre>
In addition to free text, the following prefixes can be used to force
- terms to match against specific portions of an email, (where <brackets>
+ terms to match against specific portions of an email, (where <brackets>
indicate user-supplied values):
-</pre>
-<pre>
- from:<name-or-address>
-</pre>
+ from:<name-or-address>
-<pre>
- to:<name-or-address>
-</pre>
+ to:<name-or-address>
-<pre>
- subject:<word-or-quoted-phrase>
-</pre>
+ subject:<word-or-quoted-phrase>
-<pre>
- attachment:<word>
-</pre>
+ attachment:<word>
-<pre>
- tag:<tag> (or is:<tag>)
-</pre>
+ tag:<tag> (or is:<tag>)
-<pre>
- id:<message-id>
-</pre>
+ id:<message-id>
-<pre>
- thread:<thread-id>
-</pre>
+ thread:<thread-id>
-<pre>
- folder:<directory-path>
-</pre>
+ folder:<directory-path>
+
+ date:<since>..<until>
-<pre>
The <b>from:</b> prefix is used to match the name or address of the sender of
an email message.
-</pre>
-<pre>
The <b>to:</b> prefix is used to match the names or addresses of any recipient
of an email message, (whether To, Cc, or Bcc).
-</pre>
-<pre>
Any term prefixed with <b>subject:</b> will match only text from the subject
of an email. Searching for a phrase in the subject is supported by
including quotation marks around the phrase, immediately following <b>sub-</b>
<b>ject:</b>.
-</pre>
-<pre>
The <b>attachment:</b> prefix can be used to search for specific filenames (or
extensions) of attachments to email messages.
-</pre>
-<pre>
For <b>tag:</b> and <b>is:</b> valid tag values include <b>inbox</b> and <b>unread</b> by default
for new messages added by <b>notmuch</b> <b>new</b> as well as any other tag values
added manually with <b>notmuch</b> <b>tag</b>.
-</pre>
-<pre>
For <b>id:</b>, message ID values are the literal contents of the Message-ID:
- header of email messages, but without the '<', '>' delimiters.
-</pre>
+ header of email messages, but without the '<', '>' delimiters.
-<pre>
The <b>thread:</b> prefix can be used with the thread ID values that are gen-
erated internally by notmuch (and do not appear in email messages).
These thread ID values can be seen in the first column of output from
<b>notmuch</b> <b>search</b>
-</pre>
-<pre>
The <b>folder:</b> prefix can be used to search for email message files that
are contained within particular directories within the mail store. Only
the directory components below the top-level mail database path are
available to be searched.
-</pre>
-<pre>
+ The <b>date:</b> prefix can be used to restrict the results to only messages
+ within a particular time range (based on the Date: header) with a range
+ syntax of:
+
+ date:<since>..<until>
+
+ See <b>DATE</b> <b>AND</b> <b>TIME</b> <b>SEARCH</b> below for details on the range expression, and
+ supported syntax for <since> and <until> date and time expressions.
+
+ The time range can also be specified using timestamps with a syntax of:
+
+ <initial-timestamp>..<final-timestamp>
+
+ Each timestamp is a number representing the number of seconds since
+ 1970-01-01 00:00:00 UTC.
+
In addition to individual terms, multiple terms can be combined with
Boolean operators ( <b>and</b>, <b>or</b>, <b>not</b> , etc.). Each term in the query will
be implicitly connected by a logical AND if no explicit operator is
provided, (except that terms with a common prefix will be implicitly
combined with OR until we get Xapian defect #402 fixed).
-</pre>
-<pre>
Parentheses can also be used to control the combination of the Boolean
operators, but will have to be protected from interpretation by the
shell, (such as by putting quotation marks around any parenthesized
expression).
</pre>
+<h2>DATE AND TIME SEARCH</h2>
<pre>
- Finally, results can be restricted to only messages within a particular
- time range, (based on the Date: header) with a syntax of:
-</pre>
+ notmuch understands a variety of standard and natural ways of express-
+ ing dates and times, both in absolute terms ("2012-10-24") and in rela-
+ tive terms ("yesterday"). Any number of relative terms can be combined
+ ("1 hour 25 minutes") and an absolute date/time can be combined with
+ relative terms to further adjust it. A non-exhaustive description of
+ the syntax supported for absolute and relative terms is given below.
-<pre>
- <initial-timestamp>..<final-timestamp>
-</pre>
+ <b>The</b> <b>range</b> <b>expression</b>
-<pre>
- Each timestamp is a number representing the number of seconds since
- 1970-01-01 00:00:00 UTC. This is not the most convenient means of
- expressing date ranges, but until notmuch is fixed to accept a more
- convenient form, one can use the date program to construct timestamps.
- For example, with the bash shell the following syntax would specify a
- date range to return messages from 2009-10-01 until the current time:
-</pre>
+ date:<since>..<until>
-<pre>
- $(date +%s -d 2009-10-01)..$(date +%s)
+ The above expression restricts the results to only messages
+ from <since> to <until>, based on the Date: header.
+
+ <since> and <until> can describe imprecise times, such as "yes-
+ terday". In this case, <since> is taken as the earliest time
+ it could describe (the beginning of yesterday) and <until> is
+ taken as the latest time it could describe (the end of yester-
+ day). Similarly, date:january..february matches from the begin-
+ ning of January to the end of February.
+
+ Currently, we do not support spaces in range expressions. You
+ can replace the spaces with '_', or (in most cases) '-', or (in
+ some cases) leave the spaces out altogether. Examples in this
+ man page use spaces for clarity.
+
+ Open-ended ranges are supported (since Xapian 1.2.1), i.e. it's
+ possible to specify date:..<until> or date:<since>.. to not
+ limit the start or end time, respectively. Pre-1.2.1 Xapian
+ does not report an error on open ended ranges, but it does not
+ work as expected either.
+
+ Entering date:expr without ".." (for example date:yesterday)
+ won't work, as it's not interpreted as a range expression at
+ all. You can achieve the expected result by duplicating the
+ expr both sides of ".." (for example date:yesterday..yester-
+ day).
+
+ <b>Relative</b> <b>date</b> <b>and</b> <b>time</b>
+ [N|number] (years|months|weeks|days|hours|hrs|minutes|mins|sec-
+ onds|secs) [...]
+
+ All refer to past, can be repeated and will be accumulated.
+
+ Units can be abbreviated to any length, with the otherwise
+ ambiguous single m being m for minutes and M for months.
+
+ Number can also be written out one, two, ..., ten, dozen, hun-
+ dred. Additionally, the unit may be preceded by "last" or
+ "this" (e.g., "last week" or "this month").
+
+ When combined with absolute date and time, the relative date
+ and time specification will be relative from the specified
+ absolute date and time.
+
+ Examples: 5M2d, two weeks
+
+ <b>Supported</b> <b>absolute</b> <b>time</b> <b>formats</b>
+ H[H]:MM[:SS] [(am|a.m.|pm|p.m.)]
+
+ H[H] (am|a.m.|pm|p.m.)
+
+ HHMMSS
+
+ now
+
+ noon
+
+ midnight
+
+ Examples: 17:05, 5pm
+
+ <b>Supported</b> <b>absolute</b> <b>date</b> <b>formats</b>
+ YYYY-MM[-DD]
+
+ DD-MM[-[YY]YY]
+
+ MM-YYYY
+
+ M[M]/D[D][/[YY]YY]
+
+ M[M]/YYYY
+
+ D[D].M[M][.[YY]YY]
+
+ D[D][(st|nd|rd|th)] Mon[thname] [YYYY]
+
+ Mon[thname] D[D][(st|nd|rd|th)] [YYYY]
+
+ Wee[kday]
+
+ Month names can be abbreviated at three or more characters.
+
+ Weekday names can be abbreviated at three or more characters.
+
+ Examples: 2012-07-31, 31-07-2012, 7/31/2012, August 3
+
+ <b>Time</b> <b>zones</b>
+ (+|-)HH:MM
+
+ (+|-)HH[MM]
+
+ Some time zone codes, e.g. UTC, EET.
</pre>
<h2>SEE ALSO</h2>
-
<pre>
- <b>notmuch</b>(1), <b>notmuch-config</b>(1), <b>notmuch-count</b>(1), <b>notmuch-dump</b>(1), <b>not-</b>
- <b>much-hooks</b>(5), <b>notmuch-new</b>(1), <b>notmuch-reply</b>(1), <b>notmuch-restore</b>(1),
- <b>notmuch-search</b>(1), <b>notmuch-show</b>(1), <b>notmuch-tag</b>(1)
+ <a href='../notmuch-1/'>notmuch</a>(1), <a href='../notmuch-config-1/'>notmuch-config</a>(1), <a href='../notmuch-count-1/'>notmuch-count</a>(1), <a href='../notmuch-dump-1/'>notmuch-dump</a>(1), <a href='../notmuch-hooks-5/'>not-</a>
+ <a href='../notmuch-hooks-5/'>much-hooks</a>(5), <a href='../notmuch-insert-1/'>notmuch-insert</a>(1), <a href='../notmuch-new-1/'>notmuch-new</a>(1), <a href='../notmuch-reply-1/'>notmuch-reply</a>(1),
+ <a href='../notmuch-restore-1/'>notmuch-restore</a>(1), <a href='../notmuch-search-1/'>notmuch-search</a>(1), <a href='../notmuch-show-1/'>notmuch-show</a>(1), <a href='../notmuch-tag-1/'>notmuch-tag</a>(1)
</pre>
-<h1>Notmuch 0.13.2</h1>
+<h2>Notmuch 0.16</h2>
projects / obsolete / notmuch-wiki / blobdiff