/* Buffer management for tar.
Copyright (C) 1988, 1992, 1993, 1994, 1996, 1997, 1999, 2000, 2001,
- 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+ Foundation, Inc.
Written by John Gilmore, on 1985-08-25.
/* Number of retries before giving up on read. */
#define READ_ERROR_MAX 10
-/* Globbing pattern to append to volume label if initial match failed. */
-#define VOLUME_LABEL_APPEND " Volume [1-9]*"
-
/* Variables. */
static tarlong prev_written; /* bytes written on previous volumes */
ct_compress,
ct_gzip,
ct_bzip2,
+ ct_lzip,
ct_lzma,
ct_lzop,
ct_xz
static struct zip_magic const magic[] = {
{ ct_tar },
{ ct_none, },
- { ct_compress, 2, "\037\235", "compress", "-Z" },
- { ct_gzip, 2, "\037\213", "gzip", "-z" },
- { ct_bzip2, 3, "BZh", "bzip2", "-j" },
- { ct_lzma, 6, "\xFFLZMA", "lzma", "--lzma" }, /* FIXME: ???? */
- { ct_lzop, 4, "\211LZO", "lzop", "--lzop" },
- { ct_xz, 6, "\0xFD7zXZ", "-J" },
+ { ct_compress, 2, "\037\235", COMPRESS_PROGRAM, "-Z" },
+ { ct_gzip, 2, "\037\213", GZIP_PROGRAM, "-z" },
+ { ct_bzip2, 3, "BZh", BZIP2_PROGRAM, "-j" },
+ { ct_lzip, 4, "LZIP", LZIP_PROGRAM, "--lzip" },
+ { ct_lzma, 6, "\xFFLZMA", LZMA_PROGRAM, "--lzma" },
+ { ct_lzop, 4, "\211LZO", LZOP_PROGRAM, "--lzop" },
+ { ct_xz, 6, "\0xFD7zXZ", XZ_PROGRAM, "-J" },
};
#define NMAGIC (sizeof(magic)/sizeof(magic[0]))
return ct_none;
}
+/* Guess if the archive is seekable. */
+static void
+guess_seekable_archive ()
+{
+ struct stat st;
+
+ if (subcommand_option == DELETE_SUBCOMMAND)
+ {
+ /* The current code in delete.c is based on the assumption that
+ skip_member() reads all data from the archive. So, we should
+ make sure it won't use seeks. On the other hand, the same code
+ depends on the ability to backspace a record in the archive,
+ so setting seekable_archive to false is technically incorrect.
+ However, it is tested only in skip_member(), so it's not a
+ problem. */
+ seekable_archive = false;
+ }
+
+ if (seek_option != -1)
+ {
+ seekable_archive = !!seek_option;
+ return;
+ }
+
+ if (!multi_volume_option && !use_compress_program_option
+ && fstat (archive, &st) == 0)
+ seekable_archive = S_ISREG (st.st_mode);
+ else
+ seekable_archive = false;
+}
+
/* Open an archive named archive_name_array[0]. Detect if it is
a compressed archive of known type and use corresponding decompression
program if so */
ERROR ((0, 0, _("This does not look like a tar archive")));
set_comression_program_by_suffix (archive_name_array[0], NULL);
if (!use_compress_program_option)
- return archive;
+ return archive;
break;
default:
/* FD is not needed any more */
rmtclose (archive);
-
+
hit_eof = false; /* It might have been set by find_next_block in
check_compressed_archive */
{
case ACCESS_READ:
archive = open_compressed_archive ();
+ if (archive >= 0)
+ guess_seekable_archive ();
break;
case ACCESS_WRITE:
return;
}
+static bool
+archive_is_dev ()
+{
+ struct stat st;
+
+ if (fstat (archive, &st))
+ {
+ stat_diag (*archive_name_cursor);
+ return false;
+ }
+ return S_ISBLK (st.st_mode) || S_ISCHR (st.st_mode);
+}
+
static void
short_read (size_t status)
{
if (left && left % BLOCKSIZE == 0
&& verbose_option
- && record_start_block == 0 && status != 0)
+ && record_start_block == 0 && status != 0
+ && archive_is_dev ())
{
unsigned long rsize = status / BLOCKSIZE;
WARN ((0, 0,
off_t start = current_block_ordinal ();
off_t offset;
off_t nrec, nblk;
- off_t skipped = (blocking_factor - (current_block - record_start));
-
- size -= skipped * BLOCKSIZE;
+ off_t skipped = (blocking_factor - (current_block - record_start))
+ * BLOCKSIZE;
- if (size < record_size)
+ if (size <= skipped)
return 0;
- /* FIXME: flush? */
-
+
/* Compute number of records to skip */
- nrec = size / record_size;
+ nrec = (size - skipped) / record_size;
+ if (nrec == 0)
+ return 0;
offset = rmtlseek (archive, nrec * record_size, SEEK_CUR);
if (offset < 0)
return offset;
case ACCESS_READ:
archive = rmtopen (*archive_name_cursor, O_RDONLY, MODE_RW,
rsh_command_option);
+ guess_seekable_archive ();
break;
case ACCESS_WRITE:
enum read_header rc;
tar_stat_init (info);
- rc = read_header_primitive (false, info);
+ rc = read_header (¤t_header, info, read_header_auto);
if (rc == HEADER_SUCCESS)
{
set_next_block_after (current_header);
{
case XGLTYPE:
{
- if (!read_header0 (&dummy))
- return false;
+ tar_stat_init (&dummy);
+ if (read_header (&header, &dummy, read_header_x_global)
+ != HEADER_SUCCESS_EXTENDED)
+ {
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ return false;
+ }
+
xheader_decode (&dummy); /* decodes values from the global header */
tar_stat_destroy (&dummy);
- if (!real_s_name)
- {
- /* We have read the extended header of the first member in
- this volume. Put it back, so next read_header works as
- expected. */
- current_block = record_start;
- }
+
+ /* The initial global header must be immediately followed by
+ an extended PAX header for the first member in this volume.
+ However, in some cases tar may split volumes in the middle
+ of a PAX header. This is incorrect, and should be fixed
+ in the future versions. In the meantime we must be
+ prepared to correctly list and extract such archives.
+
+ If this happens, the following call to read_header returns
+ HEADER_FAILURE, which is ignored.
+
+ See also tests/multiv07.at */
+
+ switch (read_header (&header, &dummy, read_header_auto))
+ {
+ case HEADER_SUCCESS:
+ set_next_block_after (header);
+ break;
+
+ case HEADER_FAILURE:
+ break;
+
+ default:
+ ERROR ((0, 0, _("This does not look like a tar archive")));
+ return false;
+ }
break;
}
}
\f
-/* Check the LABEL block against the volume label, seen as a globbing
+#define VOLUME_TEXT " Volume "
+#define VOLUME_TEXT_LEN (sizeof VOLUME_TEXT - 1)
+
+char *
+drop_volume_label_suffix (const char *label)
+{
+ const char *p;
+ size_t len = strlen (label);
+
+ if (len < 1)
+ return NULL;
+
+ for (p = label + len - 1; p > label && isdigit ((unsigned char) *p); p--)
+ ;
+ if (p > label && p - (VOLUME_TEXT_LEN - 1) > label)
+ {
+ p -= VOLUME_TEXT_LEN - 1;
+ if (memcmp (p, VOLUME_TEXT, VOLUME_TEXT_LEN) == 0)
+ {
+ char *s = xmalloc ((len = p - label) + 1);
+ memcpy (s, label, len);
+ s[len] = 0;
+ return s;
+ }
+ }
+
+ return NULL;
+}
+
+/* Check LABEL against the volume label, seen as a globbing
pattern. Return true if the pattern matches. In case of failure,
retry matching a volume sequence number before giving up in
multi-volume mode. */
static bool
-check_label_pattern (union block *label)
+check_label_pattern (const char *label)
{
char *string;
bool result;
- if (! memchr (label->header.name, '\0', sizeof label->header.name))
- return false;
-
- if (fnmatch (volume_label_option, label->header.name, 0) == 0)
+ if (fnmatch (volume_label_option, label, 0) == 0)
return true;
if (!multi_volume_option)
return false;
- string = xmalloc (strlen (volume_label_option)
- + sizeof VOLUME_LABEL_APPEND + 1);
- strcpy (string, volume_label_option);
- strcat (string, VOLUME_LABEL_APPEND);
- result = fnmatch (string, label->header.name, 0) == 0;
- free (string);
+ string = drop_volume_label_suffix (label);
+ if (string)
+ {
+ result = fnmatch (string, volume_label_option, 0) == 0;
+ free (string);
+ }
return result;
}
static void
match_volume_label (void)
{
- union block *label = find_next_block ();
-
- if (!label)
+ if (!volume_label)
+ {
+ union block *label = find_next_block ();
+
+ if (!label)
+ FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
+ quote (volume_label_option)));
+ if (label->header.typeflag == GNUTYPE_VOLHDR)
+ {
+ if (memchr (label->header.name, '\0', sizeof label->header.name))
+ assign_string (&volume_label, label->header.name);
+ else
+ {
+ volume_label = xmalloc (sizeof (label->header.name) + 1);
+ memcpy (volume_label, label->header.name,
+ sizeof (label->header.name));
+ volume_label[sizeof (label->header.name)] = 0;
+ }
+ }
+ else if (label->header.typeflag == XGLTYPE)
+ {
+ struct tar_stat_info st;
+ tar_stat_init (&st);
+ xheader_read (&st.xhdr, label,
+ OFF_FROM_HEADER (label->header.size));
+ xheader_decode (&st);
+ tar_stat_destroy (&st);
+ }
+ }
+
+ if (!volume_label)
FATAL_ERROR ((0, 0, _("Archive not labeled to match %s"),
quote (volume_label_option)));
- if (!check_label_pattern (label))
+
+ if (!check_label_pattern (volume_label))
FATAL_ERROR ((0, 0, _("Volume %s does not match %s"),
- quote_n (0, label->header.name),
+ quote_n (0, volume_label),
quote_n (1, volume_label_option)));
}
projects / tar / blobdiff