[[!img notmuch-logo.png alt="Notmuch logo" class="left"]]
#Tips and Tricks for using notmuch with Emacs
-The main client based on notmuch is notmuch.el, which is included in the notmuch package. It is might, and allows you to configure a lot of things, however, it might not be immediately obvious how, and how the general workflow generally looks like. This [first section](#typical_workflow) will describe a typical workflow and setup, while the section [Advanced tips and tweaks](#advanced_tips) below, focuses on more specific questions.
+The main Notmuch message reading client is **notmuch.el**, which is an
+[emacs](http://www.gnu.org/software/emacs/) major mode, and is
+included in the notmuch package.
-<h2 id="typical_workflow">Typical setup and workflow</h2>
+## Setup
-### Set up & receiving mails
+To use the Notmuch emacs mode, first add the following line to your
+.emacs rc file:
-Notmuch requires either a MailDir or a "mh"-style maildirectory to operate on. (It basically requires any setup in which each mail is in a file of it's own.) Most people use "[offlineimap](http://software.complete.org/software/projects/show/offlineimap)" or "[mbsync](http://isync.sourceforge.net/)" in order to synchronize their IMAP or pop mail server with a local mail store. offlineimap is quite useful and widely tested, it also offers a handy hook that will come in useful a bit later in our setup.
+ (require 'notmuch)
-So go install and configure offlineimap so you can simply run offlineimap and have an updated maildir. In the [Account xxx] section of your .offineimaprc file your can specify a "presynchook" and "postsynchook" command that will get run whenever you sync. Point _postsynchook_ to a script that gets run on every sync and that will do the automatic tagging and updating of your notmuch database.
+Then, either run "emacs -f notmuch", or execute the command "M-x
+notmuch" from within a running emacs.
-The script will look somewhat like this:
+## Navigating & reading mails
-> #/bin/sh
-> # incorporate all new mails in the database
-> notmuch new > /dev/null
-> #apply some automatic tags
-> notmuch tag +notmuch from:notmuch@notmuchmail.org and not tag:notmuch
-> ...more tag rules...
+When first starting notmuch in emacs, you will be presented with the
+notmuch "hello" page. From here you can do searches, see lists of
+recent searches, saved searches, message tags, help information, etc.
-If you don't need automatic tagging, just use "notmuch new > /dev/null" as your synchook. One advanced setup with automatic tagging has been described by James Vasile here (id: _87hbp5j9dv.fsf@hackervisions.org_). Carl Worth has described his script in this mail (id: _87r5o8stbj.fsf@yoom.home.cworth.org_) in the same thread.
+Executing a search will open a new buffer in notmuch-search-mode
+displaying the search results. Each line in the search results
+represents a message thread. Hitting the '?' key will show help for
+this mode.
-> __A note on message ids__: Confused by those message ids? Get used to them, because they are an importance part of the notmuch workflow. Every send message has a unique message id, just like a website has a unique url. On the notmuch mailing list people will throw around message ids and expect people to just find the right mails, as this is what notmuch makes easy. In order to find a specific message, hit 's' for search and type: "id:messageidhere". If you incorporated the notmuch mail archive, you can e.g. try to find id:87r5o8stbj.fsf@yoom.home.cworth.org. Don't have the notmuch archive back to Feb 25, 2010? Fortunately gmane (and probably others allow to search for message id in their archives as well. You'll find this message under [http://mid.gmane.org/87r5o8stbj.fsf@yoom.home.cworth.org](http://mid.gmane.org/87r5o8stbj.fsf@yoom.home.cworth.org) (incidentally, this server seems to be down right now).
+In general, the 'q' will kill the current notmuch buffer and return
+you to the previous buffer (sort of like a 'pop').
-### Synchronizing notmuch tags with maildir flags
-IMAP users rely on maildir flags that convey the status "seen", "replied", "trashed", in order to synchronize the status of their mail across mail clients (a [maildir flag](http://cr.yp.to/proto/maildir.html) is simply a defined part of their filename). notmuch will by default happily ignore those flags and will never modify them either. If you want to use your mail with non-notmuch clients too, please check out the entry on "[how to sync notmuch tags and maildir flags](#sync_maildir_flags)".
+In search mode, navigating to a thread and hitting return will then
+open a new buffer in notmuch-show-mode, which will show the actual
+message contents of the thread.
-### Navigating & reading mails
-OK, messages are now in your maildir and they have the tags you want them to have (of course you will be assigning more tags manually as you parse through your mail.). Now, on to actually using notmuch in emacs. If you added the correct bits to your .emacs file you will be able to start notmuch by typing "M-x notmuch" (or M-x notmuch-folder). If you want to start notmuch immediately when starting emacs you can also call emacs as "emacs -f notmuch" (and create a handy shortcut on your desktop for that).
+## Sending mail
-notmuch (the search view) and notmuch-folder are the 2 main views that can be used to navigate through your mail.
-The default notmuch "home" is a notmuch-search view with all all mail threads in which a message has been tagged as "inbox". Just navigate that page and read threads by hitting <RETURN> on one of them. This will open a notmuch thread view with all messages in this thread. Threads are a powerful construct in notmuch as a thread really represents a discussion around a single topic. In difference to other mail applications, you will often find very long threads in notmuch mail conversations, or people reviving very old threads with a reply.
+In any notmuch mode, you can start a new message by hitting the 'm'
+key. To reply to a message or thread, just hit the 'r' key.
-The second way of navigating notmuch mails, is by using the notmuch-folder view which you can invoke with `M-x notmuch-folder` (or using the F key if you applied the patch from mail id: 1265889583-25406-1-git-send-email-dme@dme.org (Feb 11st, 2010)). For information on how to customize your notmuch-folder views, see [here](#customize_notmuch_folder). This view provides you with "virtual folders" that allow you to browse all emails topic-by-topic. For example, if you want to browse all notmuch related mail every 10 minutes, but check out mails from your boss only once a day, this will be one convenient way to do it. It will also give you a nice overview of how many (unread) emails you have for each folder. Those folders are virtual in that a mail can easily be part of several folders at the same time and the folders will be upated on-the-fly every time you hit `=`.
+When composing new messages, you will be entered in emacs's
+"message-mode", which is a powerful mode for composing and sending
+messages. When in message move, you can type "C-c ?" for help.
-Last but not least, you can always search for a specific mail. Notmuch provides very powerful search possibilities which allows you to find mail threads easily without having to file them away into umpteenth mail folders as you might have been doing in your Thunderbird, Mail.app, or Outlook.
+If you would like to use address autocompletion, see the [address
+completion howto](#address_completion)" below.
-### search strategies
-__[TODO, describe s, f, t keys and some expemplary searches]__.
-__[TODO: describe common search strategies that notmuch users use]__
+When you are ready to send a message, type "C-c C-c". By default
+message mode will use your sendmail command to send mail, so make sure
+that works. One annoying standard configuration of message mode is
+that it will hide the sent mail in your emacs frame stack, but it will
+not close it. If you type several mails in an emacs session they will
+accumulate and make switching between buffers more annoying. You can
+avoid that behavior by adding `(setq message-kill-buffer-on-exit t)`
+in your .emacs file which will really close the mail window after
+sending it.
-###Sending mail
-Notmuch itself does not provide any facilities for sending mail. Fortunately, emacs comes with "message mode" which offers that functionality. This also means that there are various methods to invoke the mail sending command. One possibility is to use "CTRL-x m" which will invoke a new "message mail" window. The second possibility is to type 'm' when you are in a notmuch window. And finally, when looking at a message or thread in notmuch you can type 'r' to start a reply.
+## Attaching files
-If you want to use mail address autocompletion, check out [bbdb](http://bbdb.sourceforge.net) which works nicely together with message mode.
+Using the `M-x mml-attach-file` command, you can attach any file to be
+send with your mail. By default this command is bound to the menu item
+`Attachments--Attach File` with the key binding `C-c C-a`. The
+variable `mml-dnd-attach-options` (M-x
+customize-variable<RET>`mml-dnd-attach-options`) can be set to allow
+the prompting for various attachment options (such as
+inline/attachement) if you want to do that.
-Type your message and send it off with ctrl-c ctrl-c. By default message mode will use your /usr/sbin/sendmail command to send a mail, so make sure that works.
-One annoying standard configuration of message mode is that it will hide the sent mail in your emacs frame stack, but it will not close it. If you type several mails in an emacs session they will accumulate and make switching between buffers more annoying. You can avoid that behavior by adding `(setq message-kill-buffer-on-exit t)` in your .emacs file which will really close the mail window after sending it.
+For those who prefer graphics, you can also simply drag and drop files
+from a file manager into a mail composition window to have it attached
+(assuming you are using emacs with X support). At least in Ubuntu it
+works by dragging from the file manager without any modifications.
-Currently, there is a slight problem with copying the sent mail into your "outbox". While conventional MUAs will automatically copy your sent mail to a "Sent" folder, notmuch will never touch your mail store and your sent mails will not be searchable by default. When replying with 'r' notmuch will insert a BCC header to yourself, but when sending a mail with 'm' or 'ctrl-x m', it will not (and can not as ctrl-x m does not involve notmuch at all). Please see the specific advice on "[how to do FCC/BCC](#fcc)" for more details on how to set up notmuch to obey your preferences.
+-----
-###3rd party application
+<h2 id="advanced_tips">Advanced tips and tweaks</h2>
-As its name implies, notmuch isn't really doing that much (which is part of its appeal to many of us). However, it enables a whole ecosystem of surrounding scripts to work in conjunction with notmuch
+* <span id="custom_keybinding">**Add a keybinding to add/remove/toggle a tag.**</span>
-* [notmuchsync](http://spaetz.github.com/notmuchsync/)
- notmuchsync is a python tool that allows
-* gitmuch?
-* ...
+ Here's an example of how to add a key binding to notmuch-show-mode
+ to toggle a "deleted" tag:
------
+ (define-key notmuch-show-mode-map "d"
+ (lambda ()
+ "toggle deleted tag for message"
+ (interactive)
+ (if (member "deleted" (notmuch-show-get-tags))
+ (notmuch-show-remove-tag "deleted")
+ (notmuch-show-add-tag "deleted"))))
-<h2 id="advanced_tips">Advanced tips and tweaks</h2>
-* <span id="fcc">How to do FCC/BCC...</span>
+ You can do the same for threads in notmuch-search-mode by just
+ replacing "show" with "search" in the called functions. This
+ definition makes use of a lambda function, but you could just as
+ easily defined a separate function first:
+
+ (defun notmuch-show-toggle-deleted-tag()
+ "toggle deleted tag for message"
+ (interactive)
+ (if (member "deleted" (notmuch-show-get-tags))
+ (notmuch-show-remove-tag "deleted")
+ (notmuch-show-add-tag "deleted")))
+ (define-key notmuch-show-mode-map "d" 'notmuch-show-toggle-deleted-tag)
+
+* <span id="fcc">**How to do FCC/BCC...**</span>
Any notmuch reply will automatically include your primary email
address in a BCC so that any messages you send will (eventually) end
- up in your mail store as well.
+ up in your mail store as well. But this doesn't do anything for
+ messages that you compose that are not replies.
+
+ Another method is to save the file in a folder of your local
+ Maildir, usually called FCC (file carbon copy). You can achieve this
+ by setting the variables `message-directory` (which defines a base
+ directory) and `notmuch-fcc-dirs` which defines the subdirectory
+ relative to message-directory in which to save the mail. Enter a
+ directory (without the maildir /cur ending which will be appended
+ automatically). To customize both variables at the same time, use
+ the fancy command:
+
+ M-x customize-apropos<RET>\(notmuch-fcc-dirs\)\|\(message-directory\)
- But this doesn't do anything for messages that you compose that are
- not replies. So we need to get sane message-mode FCC figured
- out. Some investigation is still needed here.
+ This method will even allow you to select different outboxes
+ depending on your selected from address, if you need that
+ functionality. Please see the documentation on the variable in the
+ customization window for how to do so.
-* <span id="customize_notmuch_folder">How to customize notmuch-folders</span>
+* <span id="customize_notmuch_folder">**How to customize notmuch-folders**</span>
There's a "notmuch-folder" command available in the emacs client
that displays a list of "folders" and the number of messages in
Of course, you can have any number of folders, each configured
with any supported search terms (see "notmuch help search-terms").
-* Viewing HTML messages with an external viewer
+ Personally, I find it fairly useful to add "not tag:delete" to those
+ views as I use that tag to mark messages as deleted and it
+ automatically removes them from my standard views. Use whatever
+ seems most useful to you.
+
+* **Viewing HTML messages with an external viewer**
The emacs client can often display an HTML message inline, but it
sometimes fails for one reason or another, (or is perhaps inadequate
already running, it seems to shut down when the script exits. I
don't know why."
-* msmtp, message mode and multiple accounts
+* **msmtp, message mode and multiple accounts**
As an alternative to running a mail server such as sendmail or
postfix just to send email, it is possible to use
for the domains you want to send out using specific SMTP servers and
the rest will go to the default account.
-* <span id="sync_maildir_flags">how to sync notmuch tags and maildir flags]</span>
-
- __[TODO: This is a wiki. write me!]__
- [mention patches that exist to honor maildir tags and notmuchsync.]
\ No newline at end of file
+* <span id="address_completion">**how to get email address completion**</span>
+
+ There are currently two solutions to this:
+
+ * [bbdb](http://bbdb.sourceforge.net) is a contact database for
+ emacs that works quite nicely together with message mode,
+ including address autocompletion.
+
+ * You can also use the notmuch database as a mail address book
+ itself. To do this you need a command line tool that outputs
+ likely address candidates based on a search string. There are currently two available:
+
+ * The python tool notmuch_address.py ('git clone http://jkr.acm.jhu.edu/git/notmuch_addresses.git`)
+ (slower, but no compilation required so good for testing the
+ setup)
+
+ * The vala-based
+ [addrlookup](http://github.com/spaetz/vala-notmuch) (faster, but
+ needs compiling). This is how you compile the (3rd party) tool
+ "addrlookup" to give you address completion:
+
+ - you need the addrlookup binary, first of all. Grab
+ http://github.com/spaetz/vala-notmuch/raw/static-sources/src/addrlookup.c
+ and build it with `cc -o addrlookup addrlookup.c ``pkg-config
+ --cflags --libs gobject-2.0`` -lnotmuch`. That should give you
+ the binary that you can test already.
+
+ - EUDC is integrated into emacs and can be used for tab completion
+ of email addresses. The code I use is here
+ http://gist.github.com/359425. It was announce in [this
+ mail](http://mid.gmane.org/87fx3uflkx.fsf@jhu.edu)
+ (id:87fx3uflkx.fsf@jhu.edu) which contains links to the git
+ repositories which contain the files.
+
+* <span id="sign_messages_gpg">**how to sign/encrypt my messages with
+ gpg**</span>
+
+ You can manually sign your messages with gpg by invoking `M-x
+ mml-secure-sign-pgpmime` (or `M-x
+ mml-secure-encrypt-pgpmime`). These functions are available via the
+ convenient (*cough cough*) keybindings `C-c C-m s p` and `C-c C-m c
+ p` by default. To sign my outgoing mail by default, I use this hook
+ in my .emacs file:
+
+ ;;sign messages by default
+ (add-hook 'message-setup-hook 'mml-secure-sign-pgpmime)
+
+ This inserts the blurb `<#part sign=pgpmime>` into the beginning of
+ my mail text body and will be converted into a pgp signature when
+ sending (so I can just manually delete that line if I do not want a
+ mail to be signed).
projects / notmuch-wiki / blobdiff