Track some changes in the tutorial repository

[hgbook-git] / tour.mdwn

## Chapter 2  
A tour of git: the basics

### 2.0 Copyright

This document is a modified version originally known as "Distributed
revision control with Mercurial" and originally authored by Bryan
O’Sullivan. The original document was obtained from
<http://hgbook.red-bean.com/>.

Copyright © 2006, 2007 Bryan O’Sullivan.

This material may be distributed only subject to the terms and
conditions set forth in version 1.0 of the Open Publication
License. Please refer to Appendix D for the license text.

As this is a modified version, the name of Bryan O'Sullivan is used
only to properly credit him with the original text. The appearance of
his name here explicitly does not assert or imply his endorsement of
this modified document.

Portions Copyright © 2007 Carl Worth.

Changes made by Carl include the following:

  * 2007-09-27:
    * Convert from HTML to markdown source syntax
    * Eliminate all content except Chapter 2 and Appendix D
    * Eliminate line numbers from examples
    * Modified to describe git instead of mercurial

### 2.1  Installing git on your system

Prebuilt binary packages of git are available for many popular
operating systems. These make it easy to start using git on your
computer immediately.

#### 2.1.1  Linux

Because each Linux distribution has its own packaging tools, policies,
and rate of development, it’s difficult to give a comprehensive set of
instructions on how to install git binaries. The version of
git that you will end up with can vary depending on how active
the person is who maintains the package for your distribution.

To keep things simple, I will focus on installing git from the
command line under the most popular Linux distributions. Most of these
distributions provide graphical package managers that will let you
install git with a single click. The package name to look for is
often git, but is sometimes git-core, (due to an unfortunate name
with git, meaning GNU Interactive Tools).

  * Debian 

        apt-get install git-core

  * Fedora Core 

        yum install git

  * Gentoo 

        emerge git

  * OpenSUSE 

        yum install git

  * Ubuntu 

        apt-get install git

#### 2.1.2  Mac OS X

A git-core package is available through
[macports](http://macports.org). Once macports is enabled, the command
to install git is:

        port install git-core

#### 2.1.3  Windows

Git has long been available as part of cygwin, and works reasonably
well in that environment. Some people find cygwin a particularly
inelegant approach to running git and would prefer a "native"
solution. To this end, the [msysgit
project](http://code.google.com/p/msysgit/) is rapidly putting
together a solution including various packages with full
installers. These include GitMe, a package to install the entire
development environment necessary to work on improving the msysgit
port of git, and WinGit, a package for installing just git itself
without the development environment, (still in Alpha as of September
2008).

### 2.2  Getting started

To begin, we’ll use the “git version” command to find out whether git
is actually installed properly. Versions 1.5 and newer of git are much
more friendly to new users than versions 1.4 and older. If you aren't
yet running version 1.5 or newer, it's highly recommended that you
upgrade.

        $ git version   
        git version 1.5.3.2

#### 2.2.1  Built-in help

Git provides a built-in help system. This is invaluable for those
times when you find yourself stuck trying to remember how to run a
command. If you are completely stuck, simply run “git help”; it will
print a brief list of commonly-used commands, along with a description
of what each does. If you ask for help on a specific command (such as
"git help init"), it prints more detailed information. [XXX: Does "git
help <foo>" work universally as a built-in or does it expect man to be
present and just call out to "man git-<foo>"?]

        [XXX: The original hgbook includes the complete output of "hg
        help init" at this point. I'm not including the corresponding
        "git help init" output as it would be excessively long. The
        description alone is quite reasonable, (other than a
        not-too-helpful aside about the obsolete git-init-db command),
        but it only comes after a full screen's worth of options
        details. Might it make sense to have a more summarized help
        output for "git help <foo>" than all of the documentation
        available for git-<foo>? And perhaps alos provide a "git -v
        help" similar to "hg -v help" for more?]

### 2.3  Working with a repository

In git, everything happens inside a repository. The repository
for a project contains all of the files that “belong to” that project,
along with a historical record of the project’s files.

There’s nothing particularly magical about a repository; it is simply
a directory tree in your filesystem that git treats as
special. You can rename or delete a repository any time you like,
using either the command line or your file browser.

#### 2.3.1  Making a local copy of a repository

Copying a repository is just a little bit special. While you could use
a normal file copying command to make a copy of a repository, it’s
best to use a built-in command that git provides. This command
is called “git clone”, because it creates an identical copy of an
existing repository.

        $ git clone git://cworth.org/git/hello
        Initialized empty Git repository in /tmp/hello/.git/
        remote: Generating pack...
        remote: Done counting 15 objects.
        remote: Deltifying 15 objects...
        remote:  100% (15/15) done
        remote: Total 15 (delta 2), reused 15 (delta remote: 2)
        Indexing 15 objects...
         100% (15/15) done
        Resolving 2 deltas...
         100% (2/2) done

If for some reason you are prevented from talking on the git: port,
then there is also the capability to clone a repository (less
efficiently) over http:

        $ git clone http://cworth.org/git/hello
        Initialized empty Git repository in /tmp/hello/.git/
        Getting alternates list for http://cworth.org/git/hello
        Getting pack list for http://cworth.org/git/hello
        Getting index for pack 04ecb061314ecbd60fa0610ecf55a1cbf85ea294
        Getting pack 04ecb061314ecbd60fa0610ecf55a1cbf85ea294
         which contains a1a0e8b392b17caf50325498df54802fe3c03710
        walk a1a0e8b392b17caf50325498df54802fe3c03710
        walk 72d4f10e4a27dbb09ace1503c20dbac1912ee451
        walk 13ed136b983a9c439eddeea8a1c2076cffbb685f
        walk 0a633bf58b45fcf1a8299d3c82cd1fd26d3f48f2
        walk db7117a9dd9a6e57e8632ea5848e1101eee0fbde

If our clone succeeded, we should now have a local directory called
hello. This directory will contain some files.

        $ ls -l
        total 4
        drwxr-xr-x 3 cworth cworth 4096 2007-09-27 16:40 hello
        $ ls hello
        hello.c  Makefile

These files have the same contents and history in our repository as
they do in the repository we cloned.

Every git repository is complete, self-contained, and
independent. It contains its own private copy of a project’s files and
history. A cloned repository remembers the location of the repository
it was cloned from, but it does not communicate with that repository,
or any other, unless you tell it to.

What this means for now is that we’re free to experiment with our
repository, safe in the knowledge that it’s a private “sandbox” that
won’t affect anyone else.

#### 2.3.2  What’s in a repository?

When we take a more detailed look inside a repository, we can see that
it contains a directory named .git. This is where git keeps all
of its metadata for the repository.

        $ cd hello
        $ ls -a
        .  ..  .git  hello.c  Makefile

The contents of the .git directory and its subdirectories are private
to git. Every other file and directory in the repository is
yours to do with as you please.

To introduce a little terminology, the .git directory is the “real”
repository, and all of the files and directories that coexist with it
are said to live in the working directory. An easy way to remember the
distinction is that the repository contains the history of your
project, while the working directory contains a snapshot of your
project at a particular point in history.

### 2.4  A tour through history

One of the first things we might want to do with a new, unfamiliar
repository is understand its history. The “hg log” command gives us a
view of history.

        $ hg log   
        changeset:   4:b57f9a090b62   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 15:43:07 2005 -0700   
        summary:     Trim comments.   
        
        changeset:   3:ff5d7b70a2a9   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:58 2005 -0700   
        summary:     Get make to generate the final binary from a .o file.   
        
        changeset:   2:057d3c2d823c   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:43 2005 -0700   
        summary:     Introduce a typo into hello.c.   
        
        changeset:   1:82e55d328c8c   
        user:        mpm@selenic.com   
        date:        Fri Aug 26 01:21:28 2005 -0700   
        summary:     Create a makefile   
        
        changeset:   0:0a04b987be5a   
        user:        mpm@selenic.com   
        date:        Fri Aug 26 01:20:50 2005 -0700   
        summary:     Create a standard "hello, world" program   
        

By default, this command prints a brief paragraph of output for each
change to the project that was recorded. In git terminology, we
call each of these recorded events a changeset, because it can contain
a record of changes to several files.

The fields in a record of output from “hg log” are as follows. 

  * changeset This field has the format of a number, followed by a
    colon, followed by a hexadecimal string. These are identifiers for
    the changeset. There are two identifiers because the number is
    shorter and easier to type than the hex string.
  * user The identity of the person who created the changeset. This is
    a free-form field, but it most often contains a person’s name and
    email address.
  * date The date and time on which the changeset was created, and the
    timezone in which it was created. (The date and time are local to
    that timezone; they display what time and date it was for the
    person who created the changeset.)
  * summary The first line of the text message that the creator of the
    changeset entered to describe the changeset.

The default output printed by “hg log” is purely a summary; it is
missing a lot of detail.

Figure [2.1][8] provides a graphical representation of the history of
the hello repository, to make it a little easier to see which
direction history is “flowing” in. We’ll be returning to this figure
several times in this chapter and the chapter that follows.

* * *

![PIC][9]   

Figure 2.1: 
Graphical history of the hello repository

* * *

#### 2.4.1  Changesets, revisions, and talking to other people

As English is a notoriously sloppy language, and computer science has
a hallowed history of terminological confusion (why use one term when
four will do?), revision control has a variety of words and phrases
that mean the same thing. If you are talking about Mercurial history
with other people, you will find that the word “changeset” is often
compressed to “change” or (when written) “cset”, and sometimes a
changeset is referred to as a “revision” or a “rev”.

While it doesn’t matter what word you use to refer to the concept of
“a changeset”, the identifier that you use to refer to “a specific
changeset” is of great importance. Recall that the changeset field in
the output from “hg log” identifies a changeset using both a number
and a hexadecimal string.

  * The revision number is only valid in that repository, 
  * while the hex string is the permanent, unchanging identifier that
    will always identify that exact changeset in every copy of the
    repository.

This distinction is important. If you send someone an email talking
about “revision 33”, there’s a high likelihood that their revision 33
will not be the same as yours. The reason for this is that a revision
number depends on the order in which changes arrived in a repository,
and there is no guarantee that the same changes will happen in the
same order in different repositories. Three changes a,b,c can easily
appear in one repository as 0,1,2, while in another as 1,0,2.

Mercurial uses revision numbers purely as a convenient shorthand. If
you need to discuss a changeset with someone, or make a record of a
changeset for some other reason (for example, in a bug report), use
the hexadecimal identifier.

#### 2.4.2  Viewing specific revisions

To narrow the output of “hg log” down to a single revision, use the -r
(or --rev) option. You can use either a revision number or a long-form
changeset identifier, and you can provide as many revisions as you
want.

        $ hg log -r 3   
        changeset:   3:ff5d7b70a2a9   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:58 2005 -0700   
        summary:     Get make to generate the final binary from a .o file.   
        
        $ hg log -r ff5d7b70a2a9   
        changeset:   3:ff5d7b70a2a9   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:58 2005 -0700   
        summary:     Get make to generate the final binary from a .o file.   
        
        $ hg log -r 1 -r 4   
        changeset:   1:82e55d328c8c   
        user:        mpm@selenic.com   
        date:        Fri Aug 26 01:21:28 2005 -0700   
        summary:     Create a makefile   
        
        changeset:   4:b57f9a090b62   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 15:43:07 2005 -0700   
        summary:     Trim comments.   
        

If you want to see the history of several revisions without having to
list each one, you can use range notation; this lets you express the
idea “I want all revisions between a and b, inclusive”.

        $ hg log -r 2:4   
        changeset:   2:057d3c2d823c   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:43 2005 -0700   
        summary:     Introduce a typo into hello.c.   
        
        changeset:   3:ff5d7b70a2a9   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:58 2005 -0700   
        summary:     Get make to generate the final binary from a .o file.   
        
        changeset:   4:b57f9a090b62   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 15:43:07 2005 -0700   
        summary:     Trim comments.   
        

Mercurial also honours the order in which you specify revisions, so
“hg log -r 2:4” prints 2,3,4 while “hg log -r 4:2” prints 4,3,2.

#### 2.4.3  More detailed information

While the summary information printed by “hg log” is useful if you
already know what you’re looking for, you may need to see a complete
description of the change, or a list of the files changed, if you’re
trying to decide whether a changeset is the one you’re looking
for. The “hg log” command’s -v (or --verbose) option gives you this
extra detail.

        $ hg log -v -r 3   
        changeset:   3:ff5d7b70a2a9   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:58 2005 -0700   
        files:       Makefile   
        description:   
        Get make to generate the final binary from a .o file.   
        
        

If you want to see both the description and content of a change, add
the -p (or --patch) option. This displays the content of a change as a
unified diff (if you’ve never seen a unified diff before, see
section [12.4][10] for an overview).

        $ hg log -v -p -r 2   
        changeset:   2:057d3c2d823c   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:43 2005 -0700   
        files:       hello.c   
        description:   
        Introduce a typo into hello.c.   
        
        
        diff -r 82e55d328c8c -r 057d3c2d823c hello.c   
        --- a/hello.c Fri Aug 26 01:21:28 2005 -0700   
        +++ b/hello.c Tue Sep 06 13:15:43 2005 -0700   
        @@ -11,6 +11,6 @@   
        
        int main(int argc, char ⋆⋆argv)   
        {   
        - printf("hello, world!∖n");   
        + printf("hello, world!∖");   
        return 0;   
        }   
        

### 2.5  All about command options

Let’s take a brief break from exploring Mercurial commands to discuss
a pattern in the way that they work; you may find this useful to keep
in mind as we continue our tour.

Mercurial has a consistent and straightforward approach to dealing
with the options that you can pass to commands. It follows the
conventions for options that are common to modern Linux and Unix
systems.

  * Every option has a long name. For example, as we’ve already seen,
    the “hg log” command accepts a --rev option.
  * Most options have short names, too. Instead of --rev, we can use
    -r. (The reason that some options don’t have short names is that
    the options in question are rarely used.)
  * Long options start with two dashes (e.g. --rev), while short
    options start with one (e.g. -r).
  * Option naming and usage is consistent across commands. For
    example, every command that lets you specify a changeset ID or
    revision number accepts both -r and --rev arguments.

In the examples throughout this book, I use short options instead of
long. This just reflects my own preference, so don’t read anything
significant into it.

Most commands that print output of some kind will print more output
when passed a -v (or --verbose) option, and less when passed -q (or
--quiet).

### 2.6  Making and reviewing changes

Now that we have a grasp of viewing history in Mercurial, let’s take a
look at making some changes and examining them.

The first thing we’ll do is isolate our experiment in a repository of
its own. We use the “hg clone” command, but we don’t need to clone a
copy of the remote repository. Since we already have a copy of it
locally, we can just clone that instead. This is much faster than
cloning over the network, and cloning a local repository uses less
disk space in most cases, too.

        $ cd ..   
        $ hg clone hello my-hello   
        2 files updated, 0 files merged, 0 files removed, 0 files unresolved   
        $ cd my-hello

As an aside, it’s often good practice to keep a “pristine” copy of a
remote repository around, which you can then make temporary clones of
to create sandboxes for each task you want to work on. This lets you
work on multiple tasks in parallel, each isolated from the others
until it’s complete and you’re ready to integrate it back. Because
local clones are so cheap, there’s almost no overhead to cloning and
destroying repositories whenever you want.

In our my-hello repository, we have a file hello.c that contains the
classic “hello, world” program. Let’s use the ancient and venerable
sed command to edit this file so that it prints a second line of
output. (I’m only using sed to do this because it’s easy to write a
scripted example this way. Since you’re not under the same constraint,
you probably won’t want to use sed; simply use your preferred text
editor to do the same thing.)

        $ sed -i '/printf/a∖∖tprintf("hello again!∖∖n");' hello.c

Mercurial’s “hg status” command will tell us what Mercurial knows
about the files in the repository.

        $ ls   
        Makefile  hello.c   
        $ hg status   
        M hello.c

The “hg status” command prints no output for some files, but a line
starting with “M” for hello.c. Unless you tell it to, “hg status” will
not print any output for files that have not been modified.

The “M” indicates that Mercurial has noticed that we modified
hello.c. We didn’t need to inform Mercurial that we were going to
modify the file before we started, or that we had modified the file
after we were done; it was able to figure this out itself.

It’s a little bit helpful to know that we’ve modified hello.c, but we
might prefer to know exactly what changes we’ve made to it. To do
this, we use the “hg diff” command.

        $ hg diff   
        diff -r b57f9a090b62 hello.c   
        --- a/hello.c Tue Sep 06 15:43:07 2005 -0700   
        +++ b/hello.c Sun Jun 17 18:05:50 2007 +0000   
        @@ -8,5 +8,6 @@ int main(int argc, char ⋆⋆argv)   
        int main(int argc, char ⋆⋆argv)   
        {   
        printf("hello, world!∖");   
        + printf("hello again!∖n");   
        return 0;   
        }

### 2.7  Recording changes in a new changeset

We can modify files, build and test our changes, and use “hg status”
and “hg diff” to review our changes, until we’re satisfied with what
we’ve done and arrive at a natural stopping point where we want to
record our work in a new changeset.

The “hg commit” command lets us create a new changeset; we’ll usually
refer to this as “making a commit” or “committing”.

#### 2.7.1  Setting up a username

When you try to run “hg commit” for the first time, it is not
guaranteed to succeed. Mercurial records your name and address with
each change that you commit, so that you and others will later be able
to tell who made each change. Mercurial tries to automatically figure
out a sensible username to commit the change with. It will attempt
each of the following methods, in order:

  1. If you specify a -u option to the “hg commit” command on the
     command line, followed by a username, this is always given the
     highest precedence.
  2. If you have set the HGUSER environment variable, this is checked next. 
  3. If you create a file in your home directory called .hgrc, with a
     username entry, that will be used next. To see what the contents
     of this file should look like, refer to section [2.7.1][11]
     below.
  4. If you have set the EMAIL environment variable, this will be used
     next.
  5. Mercurial will query your system to find out your local user name
     and host name, and construct a username from these
     components. Since this often results in a username that is not
     very useful, it will print a warning if it has to do this.

If all of these mechanisms fail, Mercurial will fail, printing an
error message. In this case, it will not let you commit until you set
up a username.

You should think of the HGUSER environment variable and the -u option
to the “hg commit” command as ways to override Mercurial’s default
selection of username. For normal use, the simplest and most robust
way to set a username for yourself is by creating a .hgrc file; see
below for details.

##### Creating a Mercurial configuration file

To set a user name, use your favourite editor to create a file called
.hgrc in your home directory. Mercurial will use this file to look up
your personalised configuration settings. The initial contents of your
.hgrc should look like this.

        # This is a Mercurial configuration file.   
        [ui]   
        username = Firstname Lastname <email.address@domain.net>

The “[ui]” line begins a section of the config file, so you can read
the “username = ...” line as meaning “set the value of the username
item in the ui section”. A section continues until a new section
begins, or the end of the file. Mercurial ignores empty lines and
treats any text from “#” to the end of a line as a comment.

##### Choosing a user name

You can use any text you like as the value of the username config
item, since this information is for reading by other people, but for
interpreting by Mercurial. The convention that most people follow is
to use their name and email address, as in the example above.

Note: Mercurial’s built-in web server obfuscates email addresses, to
make it more difficult for the email harvesting tools that spammers
use. This reduces the likelihood that you’ll start receiving more junk
email if you publish a Mercurial repository on the web.

#### 2.7.2  Writing a commit message

When we commit a change, Mercurial drops us into a text editor, to
enter a message that will describe the modifications we’ve made in
this changeset. This is called the commit message. It will be a record
for readers of what we did and why, and it will be printed by “hg log”
after we’ve finished committing.

        $ hg commit

The editor that the “hg commit” command drops us into will contain an
empty line, followed by a number of lines starting with “HG:”.

        empty line   
        HG: changed hello.c

Mercurial ignores the lines that start with “HG:”; it uses them only
to tell us which files it’s recording changes to. Modifying or
deleting these lines has no effect.

#### 2.7.3  Writing a good commit message

Since “hg log” only prints the first line of a commit message by
default, it’s best to write a commit message whose first line stands
alone. Here’s a real example of a commit message that doesn’t follow
this guideline, and hence has a summary that is not readable.

        changeset:   73:584af0e231be   
        user:        Censored Person <censored.person@example.org>   
        date:        Tue Sep 26 21:37:07 2006 -0700   
        summary:     include buildmeister/commondefs.   Add an exports and install

As far as the remainder of the contents of the commit message are
concerned, there are no hard-and-fast rules. Mercurial itself doesn’t
interpret or care about the contents of the commit message, though
your project may have policies that dictate a certain kind of
formatting.

My personal preference is for short, but informative, commit messages
that tell me something that I can’t figure out with a quick glance at
the output of “hg log --patch”.

#### 2.7.4  Aborting a commit

If you decide that you don’t want to commit while in the middle of
editing a commit message, simply exit from your editor without saving
the file that it’s editing. This will cause nothing to happen to
either the repository or the working directory.

If we run the “hg commit” command without any arguments, it records
all of the changes we’ve made, as reported by “hg status” and “hg
diff”.

#### 2.7.5  Admiring our new handiwork

Once we’ve finished the commit, we can use the “hg tip” command to
display the changeset we just created. This command produces output
that is identical to “hg log”, but it only displays the newest
revision in the repository.

        $ hg tip -vp   
        changeset:   5:fa1321bf0c80   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Sun Jun 17 18:05:50 2007 +0000   
        files:       hello.c   
        description:   
        Added an extra line of output   
        
        
        diff -r b57f9a090b62 -r fa1321bf0c80 hello.c   
        --- a/hello.c Tue Sep 06 15:43:07 2005 -0700   
        +++ b/hello.c Sun Jun 17 18:05:50 2007 +0000   
        @@ -8,5 +8,6 @@ int main(int argc, char ⋆⋆argv)   
        int main(int argc, char ⋆⋆argv)   
        {   
        printf("hello, world!∖");   
        + printf("hello again!∖n");   
        return 0;   
        }   
        

We refer to the newest revision in the repository as the tip revision,
or simply the tip.

### 2.8  Sharing changes

We mentioned earlier that repositories in Mercurial are
self-contained. This means that the changeset we just created exists
only in our my-hello repository. Let’s look at a few ways that we can
propagate this change into other repositories.

#### 2.8.1  Pulling changes from another repository

To get started, let’s clone our original hello repository, which does
not contain the change we just committed. We’ll call our temporary
repository hello-pull.

        $ cd ..   
        $ hg clone hello hello-pull   
        2 files updated, 0 files merged, 0 files removed, 0 files unresolved

We’ll use the “hg pull” command to bring changes from my-hello into
hello-pull. However, blindly pulling unknown changes into a repository
is a somewhat scary prospect. Mercurial provides the “hg incoming”
command to tell us what changes the “hg pull” command would pull into
the repository, without actually pulling the changes in.

        $ cd hello-pull   
        $ hg incoming ../my-hello   
        comparing with ../my-hello   
        searching for changes   
        changeset:   5:fa1321bf0c80   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Sun Jun 17 18:05:50 2007 +0000   
        summary:     Added an extra line of output   
        

(Of course, someone could cause more changesets to appear in the
repository that we ran “hg incoming” in, before we get a chance to “hg
pull” the changes, so that we could end up pulling changes that we
didn’t expect.)

Bringing changes into a repository is a simple matter of running the
“hg pull” command, and telling it which repository to pull from.

        $ hg tip   
        changeset:   4:b57f9a090b62   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 15:43:07 2005 -0700   
        summary:     Trim comments.   
        
        $ hg pull ../my-hello   
        pulling from ../my-hello   
        searching for changes   
        adding changesets   
        adding manifests   
        adding file changes   
        added 1 changesets with 1 changes to 1 files   
        (run 'hg update' to get a working copy)   
        $ hg tip   
        changeset:   5:fa1321bf0c80   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Sun Jun 17 18:05:50 2007 +0000   
        summary:     Added an extra line of output   
        

As you can see from the before-and-after output of “hg tip”, we have
successfully pulled changes into our repository. There remains one
step before we can see these changes in the working directory.

#### 2.8.2  Updating the working directory

We have so far glossed over the relationship between a repository and
its working directory. The “hg pull” command that we ran in
section [2.8.1][12] brought changes into the repository, but if we
check, there’s no sign of those changes in the working directory. This
is because “hg pull” does not (by default) touch the working
directory. Instead, we use the “hg update” command to do this.

        $ grep printf hello.c   
        printf("hello, world!∖");   
        $ hg update tip   
        1 files updated, 0 files merged, 0 files removed, 0 files unresolved   
        $ grep printf hello.c   
        printf("hello, world!∖");   
        printf("hello again!∖n");

It might seem a bit strange that “hg pull” doesn’t update the working
directory automatically. There’s actually a good reason for this: you
can use “hg update” to update the working directory to the state it
was in at any revision in the history of the repository. If you had
the working directory updated to an old revision—to hunt down the
origin of a bug, say—and ran a “hg pull” which automatically updated
the working directory to a new revision, you might not be terribly
happy.

However, since pull-then-update is such a common thing to do,
Mercurial lets you combine the two by passing the -u option to “hg
pull”.

        hg pull -u

If you look back at the output of “hg pull” in section [2.8.1][12]
when we ran it without -u, you can see that it printed a helpful
reminder that we’d have to take an explicit step to update the working
directory:

        (run 'hg update' to get a working copy)

To find out what revision the working directory is at, use the “hg
parents” command.

        $ hg parents   
        changeset:   5:fa1321bf0c80   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Sun Jun 17 18:05:50 2007 +0000   
        summary:     Added an extra line of output   
        

If you look back at figure [2.1][8], you’ll see arrows connecting each
changeset. The node that the arrow leads from in each case is a
parent, and the node that the arrow leads to is its child. The working
directory has a parent in just the same way; this is the changeset
that the working directory currently contains.

To update the working directory to a particular revision, give a
revision number or changeset ID to the “hg update” command.

        $ hg update 2   
        2 files updated, 0 files merged, 0 files removed, 0 files unresolved   
        $ hg parents   
        changeset:   2:057d3c2d823c   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Tue Sep 06 13:15:43 2005 -0700   
        summary:     Introduce a typo into hello.c.   
        
        $ hg update   
        2 files updated, 0 files merged, 0 files removed, 0 files unresolved

If you omit an explicit revision, “hg update” will update to the tip
revision, as shown by the second call to “hg update” in the example
above.

#### 2.8.3  Pushing changes to another repository

Mercurial lets us push changes to another repository, from the
repository we’re currently visiting. As with the example of “hg pull”
above, we’ll create a temporary repository to push our changes into.

        $ cd ..   
        $ hg clone hello hello-push   
        2 files updated, 0 files merged, 0 files removed, 0 files unresolved

The “hg outgoing” command tells us what changes would be pushed into
another repository.

        $ cd my-hello   
        $ hg outgoing ../hello-push   
        comparing with ../hello-push   
        searching for changes   
        changeset:   5:fa1321bf0c80   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Sun Jun 17 18:05:50 2007 +0000   
        summary:     Added an extra line of output   
        

And the “hg push” command does the actual push. 

        $ hg push ../hello-push   
        pushing to ../hello-push   
        searching for changes   
        adding changesets   
        adding manifests   
        adding file changes   
        added 1 changesets with 1 changes to 1 files

As with “hg pull”, the “hg push” command does not update the working
directory in the repository that it’s pushing changes into. (Unlike
“hg pull”, “hg push” does not provide a -u option that updates the
other repository’s working directory.)

What happens if we try to pull or push changes and the receiving
repository already has those changes? Nothing too exciting.

        $ hg push ../hello-push   
        pushing to ../hello-push   
        searching for changes   
        no changes found

#### 2.8.4  Sharing changes over a network

The commands we have covered in the previous few sections are not
limited to working with local repositories. Each works in exactly the
same fashion over a network connection; simply pass in a URL instead
of a local path.

        $ hg outgoing http://hg.serpentine.com/tutorial/hello   
        comparing with http://hg.serpentine.com/tutorial/hello   
        searching for changes   
        changeset:   5:fa1321bf0c80   
        tag:         tip   
        user:        Bryan O'Sullivan <bos@serpentine.com>   
        date:        Sun Jun 17 18:05:50 2007 +0000   
        summary:     Added an extra line of output   
        

In this example, we can see what changes we could push to the remote
repository, but the repository is understandably not set up to let
anonymous users push to it.

        $ hg push http://hg.serpentine.com/tutorial/hello   
        pushing to http://hg.serpentine.com/tutorial/hello   
        searching for changes   
        ssl required

   [1]: http://hgbook.red-bean.com/hgbookch3.html
   [2]: http://hgbook.red-bean.com/hgbookch1.html
   [3]: http://hgbook.red-bean.com/hgbookch1.html#tailhgbookch1.html
   [4]: #tailhgbookch2.html
   [5]: http://hgbook.red-bean.com/hgbook.html#hgbookch2.html
   [6]: http://mercurial.berkwood.com/
   [7]: http://hgbook.red-bean.com/hgbookli4.html#Xweb:macpython
   [8]: #x6-340581
   [9]: hgbookch2_files/tour-history.png
   [10]: http://hgbook.red-bean.com/hgbookch12.html#x16-27100012.4
   [11]: #x6-420002.7.1
   [12]: #x6-490002.8.1
   [13]: http://hgbook.red-bean.com/hgbookch2.html

## Appendix D  
Open Publication License

Version 1.0, 8 June 1999 

### D.1  Requirements on both unmodified and modified versions

The Open Publication works may be reproduced and distributed in whole
or in part, in any medium physical or electronic, provided that the
terms of this license are adhered to, and that this license or an
incorporation of it by reference (with any options elected by the
author(s) and/or publisher) is displayed in the reproduction.

Proper form for an incorporation by reference is as follows: 

Copyright (c) year by author’s name or designee. This material may be
distributed only subject to the terms and conditions set forth in the
Open Publication License, vx.y or later (the latest version is
presently available at
[http://www.opencontent.org/openpub/][http://www.opencontent.org/openpub/]).

The reference must be immediately followed with any options elected by
the author(s) and/or publisher of the document (see section D.6).

Commercial redistribution of Open Publication-licensed material is
permitted.

Any publication in standard (paper) book form shall require the
citation of the original publisher and author. The publisher and
author’s names shall appear on all outer surfaces of the book. On all
outer surfaces of the book the original publisher’s name shall be as
large as the title of the work and cited as possessive with respect to
the title.

### D.2  Copyright

The copyright to each Open Publication is owned by its author(s) or
designee.

### D.3  Scope of license

The following license terms apply to all Open Publication works,
unless otherwise explicitly stated in the document.

Mere aggregation of Open Publication works or a portion of an Open
Publication work with other works or programs on the same media shall
not cause this license to apply to those other works. The aggregate
work shall contain a notice specifying the inclusion of the Open
Publication material and appropriate copyright notice.

Severability. If any part of this license is found to be unenforceable
in any jurisdiction, the remaining portions of the license remain in
force.

No warranty. Open Publication works are licensed and provided “as is”
without warranty of any kind, express or implied, including, but not
limited to, the implied warranties of merchantability and fitness for
a particular purpose or a warranty of non-infringement.

### D.4  Requirements on modified works

All modified versions of documents covered by this license, including
translations, anthologies, compilations and partial documents, must
meet the following requirements:

  1. The modified version must be labeled as such. 
  2. The person making the modifications must be identified and the
     modifications dated.
  3. Acknowledgement of the original author and publisher if
     applicable must be retained according to normal academic citation
     practices.
  4. The location of the original unmodified document must be identified. 
  5. The original author’s (or authors’) name(s) may not be used to
     assert or imply endorsement of the resulting document without the
     original author’s (or authors’) permission.

### D.5  Good-practice recommendations

In addition to the requirements of this license, it is requested from
and strongly recommended of redistributors that:

  1. If you are distributing Open Publication works on hardcopy or
     CD-ROM, you provide email notification to the authors of your
     intent to redistribute at least thirty days before your
     manuscript or media freeze, to give the authors time to provide
     updated documents. This notification should describe
     modifications, if any, made to the document.
  2. All substantive modifications (including deletions) be either
     clearly marked up in the document or else described in an
     attachment to the document.
  3. Finally, while it is not mandatory under this license, it is
     considered good form to offer a free copy of any hardcopy and
     CD-ROM expression of an Open Publication-licensed work to its
     author(s).

### D.6  License options

The author(s) and/or publisher of an Open Publication-licensed
document may elect certain options by appending language to the
reference to or copy of the license. These options are considered part
of the license instance and must be included with the license (or its
incorporation by reference) in derived works.

  1. To prohibit distribution of substantively modified versions
     without the explicit permission of the author(s). “Substantive
     modification” is defined as a change to the semantic content of
     the document, and excludes mere changes in format or
     typographical corrections.

     To accomplish this, add the phrase “Distribution of substantively
     modified versions of this document is prohibited without the
     explicit permission of the copyright holder.” to the license
     reference or copy.

  2. To prohibit any publication of this work or derivative works in
     whole or in part in standard (paper) book form for commercial
     purposes is prohibited unless prior permission is obtained from
     the copyright holder.

     To accomplish this, add the phrase “Distribution of the work or
     derivative of the work in any standard (paper) book form is
     prohibited unless prior permission is obtained from the copyright
     holder.” to the license reference or copy.