(setq notmuch-saved-searches '((:name "inbox"
:query "tag:inbox"
:count-query "tag:inbox and tag:unread"
- :sort-order 'oldest-first)))
+ :sort-order oldest-first)))
specifies a single saved search for inbox, but the number displayed by
the search will be the number of unread messages in the inbox, and the
for the domains you want to send out using specific SMTP servers and
the rest will go to the default account.
+## sending mail using smtpmail
+
+<!-- By default message mode will use the system `sendmail` command to send
+mail. However, on a typical desktop machine there may not be local SMTP
+daemon running (nor it is configured to send mail outside of the system). -->
+
+If setting up local `sendmail` or `msmtp` is not feasible or desirable,
+the Emacs `smtpmail` package can be used to send email by talking to remote
+SMTP server via TCP connection. It is pretty easy to configure:
+
+1. Emacs variable `message-send-mail-function` has not been set
+
+ Initially, Emacs variable `message-send-mail-function` has value of
+ `sendmail-query-once`. When (notmuch) message mode is about to send email,
+ `sendmail-query-once` will ask how emacs should send email. Typing `smtp`
+ will configure `smtpmail` and Emacs may prompt for SMTP settings.
+
+1. `M-x customize-group RET smtpmail`
+
+ As a minimum, 'Smtpmail Smtp Server' needs to be set.
+
+ After doing that, continue with `M-x load-library RET message` and
+ `M-x customize-variable RET message-send-mail-function`.
+ In the customization buffer select `message-smtpmail-send-it`.
+
+1. Set some variables in .emacs or in [notmuch init file](/notmuch-emacs#notmuch_init_file)
+
+ (setq smtpmail-smtp-server "smtp.server.tld" ;; <-- edit this !!!
+ ;; smtpmail-smtp-service 25 ;; 25 is default -- uncomment and edit if needed
+ ;; smtpmail-stream-type 'starttls
+ ;; smtpmail-debug-info t
+ ;; smtpmail-debug-verb t
+ message-send-mail-function 'message-smtpmail-send-it)
+
+Note that emacs 24 or newer is required for `smtpmail-stream-type`
+(and smtp authentication) to be effective.
+
+More information for smtpmail is available:
+
+* In Emacs: `M-x info-display-manual smtpmail`
+* [EmacsWiki Page](http://www.emacswiki.org/emacs/SendingMail)
+
+
## <span id="address_completion">Address completion when composing</span>
There are currently three solutions to this:
+### notmuch address
+
+Starting with Notmuch 0.21, there is a builtin command to perform
+autocompletion directly within Notmuch. Starting with 0.22, it is
+configured by default, so if you have previously configured another
+completion mechanism, you may want to try out the new internal
+method. Use `M-x customize-variable RET notmuch-address-command` and
+reset the value to "internal address completion" (`'internal` in
+lisp).
+
+If you are not yet running 0.22, you can still use it by adding a
+wrapper around the command called, say, `notmuch-address`:
+
+ #!/bin/sh
+ exec notmuch address from:"$*"
+
+Then you can set the `notmuch-address-command` to `notmuch-address`
+(if it is in your `$PATH` of course, otherwise use an absolute path).
+
### bbdb
[bbdb](http://bbdb.sourceforge.net) is a contact database for emacs
git clone https://github.com/aperezdc/notmuch-addrlookup-c
cd notmuch-addrlookup-c
make
-
+
* The vala-based
[addrlookup](http://github.com/spaetz/vala-notmuch) The addrlookup binary needs to be compiled.
Grab
from notmuch. It also includes a vim plugin.
You can perform tab-completion using any of these programs.
-Just add the following to your [notmuch init file](#notmuch_init_file):
+Just add the following to your [notmuch init file](/notmuch-emacs#notmuch_init_file):
(require 'notmuch-address)
(setq notmuch-address-command "/path/to/address_fetching_program")
You will find the akonadimailsearch binary in the build/src directory. Copy it to ~/bin .
You can now add the following settings to your
-[notmuch init file](#notmuch_init_file):
+[notmuch init file](/notmuch-emacs#notmuch_init_file):
(require 'notmuch-address)
(setq notmuch-address-command "~/bin/akonadimailsearch")
installed, it will shadow the fixed version of easypg included with
emacs.
+- If you wish `mml-secure-encrypt` to encrypt also for the sender, then
+ `M-x customize-variable mml2015-encrypt-to-self` might suit your need.
+
## Reading and verifying encrypted and signed messages
Encrypted and signed mime messages can be read and verified with:
- (notmuch-crypto-process-mime t)
+ (setq notmuch-crypto-process-mime t)
Decrypting or verifying inline pgp messages can be done by selecting
an the inline pgp area and and using:
## Resending (or bouncing) messages
-Add the following to your [notmuch init file](#notmuch_init_file) to be able
+Add the following to your [notmuch init file](/notmuch-emacs#notmuch_init_file) to be able
to resend the current message in show mode.
(define-key notmuch-show-mode-map "b"
## `notmuch-hello` refresh status message
-Add the following to your [notmuch init file](#notmuch_init_file) to get a
+Add the following to your [notmuch init file](/notmuch-emacs#notmuch_init_file) to get a
status message about the change in the number of messages in the mail store
when refreshing the `notmuch-hello` buffer.
Mailman mailing list software rewrites and rewraps long message subjects in
a way that causes TABs to appear in the middle of the subject and header
-lines. Add this to your [notmuch init file](#notmuch_init_file) to replace
+lines. Add this to your [notmuch init file](/notmuch-emacs#notmuch_init_file) to replace
tabs with spaces in subject lines:
(defun notmuch-show-subject-tabs-to-spaces ()
and then this function needs to bound into the keymap with something like
(define-key 'notmuch-show-mode-map "D" 'my-notmuch-show-view-as-patch)
+
+## Interfacing with Patchwork
+
+[Patchwork](http://jk.ozlabs.org/projects/patchwork/) is a web-based system for
+tracking patches sent to a mailing list. While the Notmuch project doesn't use
+it, many other open source projects do. Having an easy way to get from a patch
+email in your favorite mail client to the web page of the patch in the Patchwork
+instance is a cool thing to have. Here's how to abuse the notmuch stash feature
+to achieve this. (Don't know stash? See `notmuch-show-stash-mlarchive-link`,
+bound to `c l` in `notmuch-show`.)
+
+The trick needed is turning the email Message-ID into a unique Patchwork ID
+assigned by Patchwork. We'll use the `pwclient` command-line tool to achieve
+this. You'll first need to get that working and configured for the Patchwork
+instance you're using. That part is beyond this tip here; please refer to
+Patchwork documentation.
+
+Check your configuration on the command-line, for example:
+
+ /path/to/pwclient -p <the-project> -n 5 -f "%{id}"
+
+Note that the -f format argument may require a reasonably new version of the
+client. Once you have the above working, you can `M-x customize-variable RET
+notmuch-show-stash-mlarchive-link-alist RET`.
+
+Add a new entry with "Function returning the URL:" set to:
+
+ (lambda (message-id)
+ (concat "http://patchwork.example.com/patch/"
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{id}"))))
+
+Replacing `http://patchwork.example.com/patch/`, `/path/to/pwclient`, and
+`the-project` appropiately. You should now be able to stash the Patchwork URL
+using `c l`.
+
+Going further, if the patch has been committed, you can get the commit hash with
+this:
+
+ (lambda (message-id)
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{commit_ref}")))
+
+And finally, if the project has a web interface to its source repository, you
+can turn the commit hash into a URL pointing there, for example:
+
+ (lambda (message-id)
+ (concat "http://cgit.example.com/the-project/commit/?id="
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{commit_ref}"))))
projects / notmuch-wiki / blobdiff