+
+## Resending (or bouncing) messages
+
+Add the following to your [notmuch init file](#notmuch_init_file) to be able
+to resend the current message in show mode.
+
+ (define-key notmuch-show-mode-map "b"
+ (lambda (&optional address)
+ "Bounce the current message."
+ (interactive "sBounce To: ")
+ (notmuch-show-view-raw-message)
+ (message-resend address)))
+
+## `notmuch-hello` refresh status message
+
+Add the following to your [notmuch init file](#notmuch_init_file) to get a
+status message about the change in the number of messages in the mail store
+when refreshing the `notmuch-hello` buffer.
+
+ (defvar notmuch-hello-refresh-count 0)
+
+ (defun notmuch-hello-refresh-status-message ()
+ (unless no-display
+ (let* ((new-count
+ (string-to-number
+ (car (process-lines notmuch-command "count"))))
+ (diff-count (- new-count notmuch-hello-refresh-count)))
+ (cond
+ ((= notmuch-hello-refresh-count 0)
+ (message "You have %s messages."
+ (notmuch-hello-nice-number new-count)))
+ ((> diff-count 0)
+ (message "You have %s more messages since last refresh."
+ (notmuch-hello-nice-number diff-count)))
+ ((< diff-count 0)
+ (message "You have %s fewer messages since last refresh."
+ (notmuch-hello-nice-number (- diff-count)))))
+ (setq notmuch-hello-refresh-count new-count))))
+
+ (add-hook 'notmuch-hello-refresh-hook 'notmuch-hello-refresh-status-message)
+
+## Replacing tabs with spaces in subject and header
+
+Mailman mailing list software rewrites and rewraps long message subjects in
+a way that causes TABs to appear in the middle of the subject and header
+lines. Add this to your [notmuch init file](#notmuch_init_file) to replace
+tabs with spaces in subject lines:
+
+ (defun notmuch-show-subject-tabs-to-spaces ()
+ "Replace tabs with spaces in subject line."
+ (goto-char (point-min))
+ (when (re-search-forward "^Subject:" nil t)
+ (while (re-search-forward "\t" (line-end-position) t)
+ (replace-match " " nil nil))))
+
+ (add-hook 'notmuch-show-markup-headers-hook 'notmuch-show-subject-tabs-to-spaces)
+
+And in header lines (this will only work with the yet to be released
+notmuch version 0.15):
+
+ (defun notmuch-show-header-tabs-to-spaces ()
+ "Replace tabs with spaces in header line."
+ (setq header-line-format
+ (notmuch-show-strip-re
+ (replace-regexp-in-string "\t" " " (notmuch-show-get-subject)))))
+
+ (add-hook 'notmuch-show-hook 'notmuch-show-header-tabs-to-spaces)
+
+## Hiding unread messages in notmuch-show
+
+I like to have an inbox saved search, but only show unread messages when they
+view a thread. This takes two steps:
+
+1. Apply
+[this patch from Mark Walters](http://notmuchmail.org/pipermail/notmuch/2012/010817.html)
+to add the `notmuch-show-filter-thread` function.
+1. Add the following hook to your emacs configuration:
+
+ (defun expand-only-unread-hook () (interactive)
+ (let ((unread nil)
+ (open (notmuch-show-get-message-ids-for-open-messages)))
+ (notmuch-show-mapc (lambda ()
+ (when (member "unread" (notmuch-show-get-tags))
+ (setq unread t))))
+ (when unread
+ (let ((notmuch-show-hook (remove 'expand-only-unread-hook notmuch-show-hook)))
+ (notmuch-show-filter-thread "tag:unread")))))
+
+ (add-hook 'notmuch-show-hook 'expand-only-unread-hook)
+
+## Changing the color of a saved search based on some other search
+
+I like to have a saved search for my inbox, but have it change color when there
+are thread with unread messages in the inbox. I accomplish this with the
+following code in my emacs config:
+
+ (defun color-inbox-if-unread () (interactive)
+ (save-excursion
+ (goto-char (point-min))
+ (let ((cnt (car (process-lines "notmuch" "count" "tag:inbox and tag:unread"))))
+ (when (> (string-to-number cnt) 0)
+ (save-excursion
+ (when (search-forward "inbox" (point-max) t)
+ (let* ((overlays (overlays-in (match-beginning 0) (match-end 0)))
+ (overlay (car overlays)))
+ (when overlay
+ (overlay-put overlay 'face '((:inherit bold) (:foreground "green")))))))))))
+ (add-hook 'notmuch-hello-refresh-hook 'color-inbox-if-unread)
+
+## Linking to notmuch messages and threads from the Circe IRC client
+
+[Circe](https://github.com/jorgenschaefer/circe/wiki) is an IRC client for emacs.
+To have clickable buttons for notmuch messages and threads, add the following to
+`lui-buttons-list` (using, e.g. M-x customize-variable)
+
+ ("\\(?:id\\|mid\\|thread\\):[0-9A-Za-z][0-9A-Za-z.@-]*" 0 notmuch-show 0)
+
+If you have notmuch-pick installed, it works fine for this as well.
+
+## Linking to notmuch messages from org-mode
+
+Support for linking to notmuch messages is distributed with org-mode,
+but as a contrib file, so you might have to work a bit to load it.
+
+In Debian and derivatives,
+
+ (add-to-list 'load-path "/usr/share/org-mode/lisp")
+
+Then
+
+ (require 'org-notmuch)
+
+In general it is nice to have a key for org-links (not just for notmuch). For example
+
+ (define-key global-map "\C-cl" 'org-store-link)
+
+## Viewing diffs in notmuch
+
+The following code allows you to view an inline patch in diff-mode
+directly from notmuch. This means that normal diff-mode commands like
+refine, next hunk etc all work.
+
+ (defun my-notmuch-show-view-as-patch ()
+ "View the the current message as a patch."
+ (interactive)
+ (let* ((id (notmuch-show-get-message-id))
+ (subject (concat "Subject: " (notmuch-show-get-subject) "\n"))
+ (diff-default-read-only t)
+ (buf (get-buffer-create (concat "*notmuch-patch-" id "*")))
+ (map (make-sparse-keymap)))
+ (define-key map "q" 'notmuch-kill-this-buffer)
+ (switch-to-buffer buf)
+ (let ((inhibit-read-only t))
+ (erase-buffer)
+ (insert subject)
+ (insert (notmuch-get-bodypart-internal id 1 nil)))
+ (set-buffer-modified-p nil)
+ (diff-mode)
+ (lexical-let ((new-ro-bind (cons 'buffer-read-only map)))
+ (add-to-list 'minor-mode-overriding-map-alist new-ro-bind))
+ (goto-char (point-min))))
+
+and then this function needs to bound into the keymap with something like
+
+ (define-key 'notmuch-show-mode-map "D" 'my-notmuch-show-view-as-patch)
+
+## Interfacing with Patchwork
+
+[Patchwork](http://jk.ozlabs.org/projects/patchwork/) is a web-based system for
+tracking patches sent to a mailing list. While the Notmuch project doesn't use
+it, many other open source projects do. Having an easy way to get from a patch
+email in your favorite mail client to the web page of the patch in the Patchwork
+instance is a cool thing to have. Here's how to abuse the notmuch stash feature
+to achieve this. (Don't know stash? See `notmuch-show-stash-mlarchive-link`,
+bound to `c l` in `notmuch-show`.)
+
+The trick needed is turning the email Message-ID into a unique Patchwork ID
+assigned by Patchwork. We'll use the `pwclient` command-line tool to achieve
+this. You'll first need to get that working and configured for the Patchwork
+instance you're using. That part is beyond this tip here; please refer to
+Patchwork documentation.
+
+Check your configuration on the command-line, for example:
+
+ /path/to/pwclient -p <the-project> -n 5 -f "%{id}"
+
+Note that the -f format argument may require a reasonably new version of the
+client. Once you have the above working, you can `M-x customize-variable RET
+notmuch-show-stash-mlarchive-link-alist RET`.
+
+Add a new entry with "Function returning the URL:" set to:
+
+ (lambda (message-id)
+ (concat "http://patchwork.example.com/patch/"
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{id}"))))
+
+Replacing `http://patchwork.example.com/patch/`, `/path/to/pwclient`, and
+`the-project` appropiately. You should now be able to stash the Patchwork URL
+using `c l`.
+
+Going further, if the patch has been committed, you can get the commit hash with
+this:
+
+ (lambda (message-id)
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{commit_ref}")))
+
+And finally, if the project has a web interface to its source repository, you
+can turn the commit hash into a URL pointing there, for example:
+
+ (lambda (message-id)
+ (concat "http://cgit.example.com/the-project/commit/?id="
+ (nth 0
+ (process-lines "/path/to/pwclient" "search"
+ "-p" "the-project"
+ "-m" (concat "<" message-id ">")
+ "-n" "1"
+ "-f" "%{commit_ref}"))))
projects / notmuch-wiki / blobdiff