To use the Notmuch emacs mode, first add the following line to your
`.emacs` rc file:
- (require 'notmuch)
+ (autoload 'notmuch "notmuch" "notmuch mail" t)
-or you can load the package via autoload:
+or if you always want to load notmuch when you start emacs:
- (autoload 'notmuch "notmuch" "notmuch mail" t)
+ (require 'notmuch)
Then, either run "emacs -f notmuch", or execute the command `M-x
notmuch` from within a running emacs.
+### <span id="notmuch_init_file"> Notmuch Emacs configuration file: </span>
+
+(Since Notmuch 0.18)
+
+After notmuch is loaded `notmuch-init-file` (typically
+ `~/.emacs.d/notmuch-config.el`) is checked out. If such file exists
+it is loaded. Most emacs lisp based configuration not suitable via
+customization can be put there instead of `~/.emacs`.
+
## Navigating & reading mails
When first starting notmuch in emacs, you will be presented with the
not close it. If you type several mails in an emacs session they will
accumulate and make switching between buffers more annoying. You can
avoid that behavior by adding `(setq message-kill-buffer-on-exit t)`
-in your `.emacs` file (or doing `M-x
-customize-variable<RET>message-kill-buffer-on-exit<RET>`) which will
-really close the mail window after sending it.
+in your `.emacs` file
+(or doing `M-x customize-variable<RET>message-kill-buffer-on-exit<RET>`)
+which will really close the mail window after sending it.
## Attaching files
#!/bin/sh
attach_cmds=""
- while [ "$1" ]; do
+ while [ $# -gt 0 ]; do
fullpath=$(readlink --canonicalize "$1")
attach_cmds="$attach_cmds (mml-attach-file \"$fullpath\")"
shift
done
emacsclient -a '' -c -e "(progn (compose-mail) $attach_cmds)"
+## Controlling external handlers for attachements
+
+You can choose e.g. which pdf viewer to invoke from notmuch-show mode by
+adding a .mailcap file in your home directory. Here is an example:
+
+ application/pdf; /usr/bin/mupdf %s; test=test "$DISPLAY" != ""; description=Portable Document Format; nametemplate=%s.pdf
+ application/x-pdf; /usr/bin/mupdf %s; test=test "$DISPLAY" != ""; description=Portable Document Format; nametemplate=%s.pdf
+
## Issues with Emacs 24
If notmuch-show-mode behaves badly for you in emacs 24.x try adding one of
# Advanced tips and tweaks
-## Use separate emacs lisp file for notmuch configuration
+## Overwriting the sender address
-Instead of adding notmuch configuration code to `.emacs`, there
-is an option to collect those to a separate file (which is only
-loaded when `notmuch` is invoked). To do this, write, for example
-a file called `~/.emacs.d/my-notmuch.el`:
+If you want to always use the same sender address, then the following
+defadvice can help you.
- ;;; my-notmuch.el -- my notmuch mail configuration
- ;;;
-
- ;;; add here stuff required to be configured *before*
- ;;; notmuch is loaded;
-
- ;; uncomment and modify in case some elisp files are not found in load-path
- ;; (add-to-list 'load-path "~/vc/ext/notmuch/emacs")
-
- ;;; load notmuch
- (require 'notmuch)
-
- ;;; add here stuff required to be configured *after*
- ;;; notmuch is loaded;
-
- ;; uncomment & modify if you want to use external smtp server to send mail
- ;; (setq smtpmail-smtp-server "smtp.server.tld"
- ;; message-send-mail-function 'message-smtpmail-send-it)
- ;; uncomment to debug smtp sending problems
- ;; (setq smtpmail-debug-info t)
-
-Then, add to `.emacs`:
-
- (autoload 'notmuch "~/.emacs.d/my-notmuch" "notmuch mail" t)
+ (defadvice notmuch-mua-reply (around notmuch-fix-sender)
+ (let ((sender "Max Monster <max.monster@example.com>"))
+ ad-do-it))
+ (ad-activate 'notmuch-mua-reply)
## Initial cursor position in notmuch 0.15 hello window
changed as notmuch has evolved but the following should work on all
versions of notmuch from 0.13 on. These functions take a list of
tag changes as argument. For example, an argument of (list "+spam"
-"-inbox) adds the tag spam and deletes the tag inbox. Note the
+"-inbox") adds the tag spam and deletes the tag inbox. Note the
argument must be a list even if there is only a single tag change
e.g., use (list "+deleted") to add the deleted tag.
## Viewing HTML messages with an external viewer
-The emacs client can display an HTML message inline using either the
-`html2text` library or some text browser, like w3m or lynx. This is
-controlled by the `mm-text-html-renderer` variable.
-
-The first option is theorically better, because it can generate
-strings formatted for emacs and do whatever you want, e.g., substitute
-text inside <b> tags for bold text in the buffer. The library, however
-is still in a very early development phase and cannot yet process
-properly many elements, like tables and <style> directives, and even
-the generated text is often poorly formatted.
+The Emacs client can generally display HTML messages inline using one of the
+supported HTML renderers. This is controlled by the `mm-text-html-renderer`
+variable.
-Among the available browsers, w3m seems to do a better job converting
-the html, and if you have the w3m emacs package, you can use it,
-instead of the w3m-standalone, and thus preserve the text formatting.
-
-But if the rendering fails for one reason or another, or if you really
-need to see the graphical presentation of the HTML message, it can be
-useful to display the message in an external viewer, such as a web
-browser. Here's a little script that Keith Packard wrote, which he
-calls `view-html`:
-
- #!/bin/sh
- dir=`mktemp -d`
- trap "rm -r $dir" 0
- cat "$@" > "$dir"/msg
- if munpack -C "$dir" -t < "$dir"/msg 2>&1 | grep 'Did not find'; then
- sed -n '/[Hh][Tt][Mm][Ll]/,$p' "$dir"/msg > $dir/part1.html
- rm "$dir"/msg
- fi
- for i in "$dir"/part*; do
- if grep -q -i -e '<html>' -e 'text/html' "$i"; then
- iceweasel "$i" &
- sleep 3
- exit 0
- fi
- done
-
-Save that script somewhere in your `${PATH}`, make it executable,
-and change the invocation of `iceweasel` to any other HTML viewer if
-necessary. Then within the emacs client, press '|' to pipe the
-current message, then type "view-html".
-
-Keith mentions the following caveat, "Note that if iceweasel isn't
-already running, it seems to shut down when the script exits. I
-don't know why."
+Sometimes it may be necessary to display the message, or a single MIME part, in
+an external browser. This can be done by `(notmuch-show-view-part)`, bound to
+`. v` by default.
## msmtp, message mode and multiple accounts
for the domains you want to send out using specific SMTP servers and
the rest will go to the default account.
-If you have a hard time getting the above to work for you, as I did,
-it's also possible to add a message-send-mail-hook in your .emacs to
-send the from header explicitly as an argument to msmtp as described
-[here](http://www.emacswiki.org/cgi-bin/wiki/GnusMSMTP#toc2) on the
-emacswiki.
-
-
## <span id="address_completion">Address completion when composing</span>
There are currently three solutions to this:
http://commonmeasure.org/~jkr/git/notmuch_addresses.git`) (slower, but
no compilation required so good for testing the setup)
+ * The C-based [notmuch-addrlookup](https://github.com/aperezdc/notmuch-addrlookup-c) by [Adrian Perez](http://perezdecastro.org/), which is faster but needs to be compiled.
+
+ git clone https://github.com/aperezdc/notmuch-addrlookup-c
+ cd notmuch-addrlookup-c
+ make
+
* The vala-based
- [addrlookup](http://github.com/spaetz/vala-notmuch) (faster, but
- needs compiling). The addrlookup binary needs to be compiled.
+ [addrlookup](http://github.com/spaetz/vala-notmuch) The addrlookup binary needs to be compiled.
Grab
`http://github.com/spaetz/vala-notmuch/raw/static-sources/src/addrlookup.c`
and build it with:
from notmuch. It also includes a vim plugin.
You can perform tab-completion using any of these programs.
-Just add the following to your .emacs:
+Just add the following to your [notmuch init file](#notmuch_init_file):
(require 'notmuch-address)
(setq notmuch-address-command "/path/to/address_fetching_program")
cd build
cmake ..; make;
-You will find the akonadimailsearch binary in the build/src directory.
-Create a ~/bin/akonadimailsearch.sh file with the following content and make it executable:
-(Adjust the path for the akonadimailsearch binary.)
+You will find the akonadimailsearch binary in the build/src directory. Copy it to ~/bin .
- #!/bin/sh
- akonadimailsearch "$@" 2>/dev/null
-
-As described above, you can now add the following settings to your ~/.emacs file:
+You can now add the following settings to your
+[notmuch init file](#notmuch_init_file):
(require 'notmuch-address)
- (setq notmuch-address-command "~/bin/akonadimailsearch.sh")
+ (setq notmuch-address-command "~/bin/akonadimailsearch")
(notmuch-address-message-insinuate)
+### Completion selection with helm
+
+An address query might return multiple possible matches from which you
+will have to select one. To ease this task, several different
+frameworks in emacs support completion selection. One of them is
+[helm](https://github.com/emacs-helm/helm). The following snippet
+improves the out-of-the-box support for helm in notmuch as it enables
+the required-match option and also does not ignore the first returned
+address.
+
+ (setq notmuch-address-selection-function
+ (lambda (prompt collection initial-input)
+ (completing-read prompt (cons initial-input collection) nil t nil 'notmuch-address-history)))
## How to sign/encrypt messages with gpg
installed, it will shadow the fixed version of easypg included with
emacs.
+## Reading and verifying encrypted and signed messages
+
+Encrypted and signed mime messages can be read and verified with:
+
+ (notmuch-crypto-process-mime t)
+
+Decrypting or verifying inline pgp messages can be done by selecting
+an the inline pgp area and and using:
+
+ M-x epa-decrypt-region RET
+
## Multiple identities using gnus-alias
[gnus-alias](http://www.emacswiki.org/emacs/GnusAlias) allows you to
## Resending (or bouncing) messages
-Add the following to your `.emacs` to be able to resend the current message in
-show mode.
+Add the following to your [notmuch init file](#notmuch_init_file) to be able
+to resend the current message in show mode.
(define-key notmuch-show-mode-map "b"
(lambda (&optional address)
## `notmuch-hello` refresh status message
-Add the following to your `.emacs` to get a status message about the change in
-the number of messages in the mail store when refreshing the `notmuch-hello`
-buffer.
+Add the following to your [notmuch init file](#notmuch_init_file) to get a
+status message about the change in the number of messages in the mail store
+when refreshing the `notmuch-hello` buffer.
(defvar notmuch-hello-refresh-count 0)
Mailman mailing list software rewrites and rewraps long message subjects in
a way that causes TABs to appear in the middle of the subject and header
-lines. Add this to your `.emacs` to replace tabs with spaces in subject
-lines:
+lines. Add this to your [notmuch init file](#notmuch_init_file) to replace
+tabs with spaces in subject lines:
(defun notmuch-show-subject-tabs-to-spaces ()
"Replace tabs with spaces in subject line."
In Debian and derivatives,
- (add-to-list 'load-path "/usr/share/org-mode/lisp")
+ (add-to-list 'load-path "/usr/share/org-mode/lisp")
Then
- (require 'org-notmuch)
+ (require 'org-notmuch)
In general it is nice to have a key for org-links (not just for notmuch). For example
projects / notmuch-wiki / blobdiff